/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1865 - (show annotations) (download)
Sat Nov 17 20:01:59 2007 UTC (6 years, 9 months ago) by agaffney
File size: 85864 byte(s)
modify root mountpoint check in gli-dialog to use a for/else and notify the user why they're not being allowed to leave the screen
1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2007 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.686 2006/09/15 16:37:11 agaffney Exp $
4
5 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
6 src/fe/dialog/gli-dialog.py:
7 modify root mountpoint check in gli-dialog to use a for/else and notify the
8 user why they're not being allowed to leave the screen
9
10 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
11 src/templates/x86ArchitectureTemplate.py:
12 move around parentheses to fix bug 179528
13
14 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
15 src/fe/gtk/InstallFailed.py:
16 correct bugzilla location for bug 178144
17
18 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
19 src/GLIArchitectureTemplate.py, src/fe/gtk/gtkfe.py:
20 fix error in debug mode for bug 178475
21 force install_type to networkless for gtkfe
22
23 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
24 src/GLIArchitectureTemplate.py:
25 set TIMEZONE in /etc/conf.d/clock for bug 158882
26
27 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
28 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
29 src/fe/gtk/InstallFailed.py, src/fe/gtk/gtkfe.py:
30 make install log location consistent throughout code
31 'View Log' button in gtkfe now looks for active and failed log
32
33 04 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org>
34 src/GLIInstallProfile.py:
35 Added x11-themes/gentoo-artwork-livecd to the list of extra packages.
36
37 04 Jan 2007; Preston Cody <codeman@gentoo.org>
38 ClientController:
39 took out the preinstall steps. these will now be handled by the frontends.
40 The actual code for the steps can be put in GLIUtility if necessary.
41 IP:
42 Took out partitioning. Added mounts.
43 Moved root mount point over from CF
44 Removed RP-PPPoE. was never used.
45 AT:
46 reordered functions. removed references to the client-config
47 fixed fstab and other locations that used mountpoints to use the new mounts.
48 removed unused rc.conf function.
49 other smaller touchups.
50 gli-dialog:
51 install_profile() to self._install_profile
52 fix reference to arch instaed of self._arch
53 x86AT:
54 fixed code to use mounts instead of partitioning.
55
56 01 Jan 2007; Preston Cody <codeman@gentoo.org>
57 fixing all instances of WINDOWSKEYS to WINDOWKEYS
58 added space in AT debug line.
59 more general updates in an effort to get the code functional
60
61 29 Oct 2006; Preston Cody <codeman@gentoo.org>
62 gli-dialog:
63 more rearranging of code. Tossed the review menu and not calling show_settings
64 not sure how those are going to turn out just yet.
65
66 22 Oct 2006; Andrew Gaffney <agaffney@gentoo.org>
67 src/Partitioning.py:
68 first round of refactoring for Partitioning.py (was GLISD)
69
70 22 Oct 2006; Preston Cody <codeman@gentoo.org>
71 gli-dialog:
72 added in the rest of the code from GLIGenDialog.
73 will start picking at it now.
74 moved the early questions such as advanced_mode/networkless
75 into functions in the GLIDialog class.
76
77 21 Oct 2006; Preston Cody <codeman@gentoo.org>
78 ClientController and gli-dialog and GLIGenDialog:
79 removing GenDialog, this code will be put into gli-dialog
80 moving some ClientController code into gli-dialog as well.
81 this is only the beginning :)
82
83 #------------------------------------------
84 # GLI SWITCHES TO SVN.
85
86 15 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
87 src/GLIArchitectureTemplate.py:
88 use _wait_for_device_node() any place we were looping and checking before
89
90 13 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
91 src/GLIArchitectureTemplate.py:
92 add _wait_for_device_node()
93 src/GLIPortage.py:
94 raise an exception in get_deps() if pkglist is empty
95 -k option to install livecd-kernel to shut up wolf31o2 :P
96
97 11 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
98 src/GLIArchitectureTemplate.py:
99 break after installing 1 mta in install_mta()
100
101 10 Sep 2006; Preston Cody <codeman@gentoo.org>
102 src/GLIGenDialog.py:
103 rewrote how the USE flags work so that they are written correctly in relation
104 to the system's USE flags.
105 added a while condition on setting a user password
106 src/GLIArchitectureTemplate.py:
107 adding a self._mounted_devices to keep track of mounted partitions.
108 When cleaning up, only unmount these partitions. Not yet tested.
109
110 10 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
111 src/GLIStorageDevice.py:
112 properly identify apple_bootstrap partitions
113
114 9 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
115 src/GLIStorageDevice.py:
116 pay attention to 'ignoredparts' when reading partition table
117
118 3 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
119 src/GLIArchitectureTemplate.py:
120 force conversion of 'mb' to long
121
122 2 Sep 2006; Preston Cody <codeman@gentoo.org>
123 Lots of internationalization fixes. Point to a translation path called
124 languages in the dialog directory. Generated and added .pot files.
125 Added gettext to GLIIP for package descriptions.
126
127 01 Sep 2006; Chris Gianelloni <wolf31o2@gentoo.org>
128 src/GLIInstallProfile.py:
129 Added some more applications to the Extra Packages list.
130
131 1 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
132 src/templates/ppcArchitectureTemplate.py:
133 this doesn't need to inherit from x86AT or create an infinite loop by calling
134 its own __init__()
135 src/GLIArchitectureTemplate.py,src/templates/x86ArchitectureTemplate.py:
136 move partitioning code to GLIAT
137
138 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
139 src/GLIArchitectureTemplate.py:
140 pass quotes_around_value=False when adding default route to conf.d/net
141
142 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
143 src/GLIArchitectureTemplate.py:
144 copy backup custom.conf from livecd if present
145
146 *GLI-0.4 (31 Jul 2006)
147
148 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
149 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
150 doing the testing and coming up with the patch.
151
152 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
153 src/GLIArchitectureTemplate.py:
154 skip blank entries/files in update_config_files()
155
156 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
157 src/templates/x86ArchitectureTemplate.py:
158 move logical clipping logic a bit
159
160 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
161 I've commented out most of the code that used launch. It wasn't working and
162 we don't have the time to fix it before the release. I'll look into it after
163 the release and make it more robust and flexible.
164
165 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/templates/x86ArchitectureTemplate.py:
167 clip logical partition at end of extended
168
169 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
170 src/GLIInstallProfile.py:
171 Added a few more applications to the list of extra packages to be merged,
172 all from various GRP sets.
173
174 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
175 Added launch variable to the end of each try-run with auth, which should
176 cause this to function properly. Of course, more testing is needed.
177
178 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
179 Fix a missed space in the installer script.
180
181 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
182 src/GLIClientConfiguration.py:
183 adding 'None' with capital N so that the frontends can parse the network type
184
185 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
186 src/GLIClientController.py:
187 log version-stamp
188
189 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
190 Updated the installer script to allow specifying the front-end to run from
191 the command line. Currently, it only supports dialog and gtk. It still needs
192 some testing, however.
193
194 9 July 2006; Preston Cody <codeman@gentoo.org>
195 src/GLIGenDialog.py:
196 make lilo only show up for x86 if non-networkless
197
198 25 Jun 2006; Preston Cody <codeman@gentoo.org>
199 src/GLIGenDialog.py:
200 adding code to auto-add doscsi if a scsi drive detected.
201 this code is also in the gtkfe already
202
203 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
204 src/GLIPortage.py:
205 pass proper PORTAGE_TMPDIR
206
207 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
208 src/GLIUtility.py:
209 fix list_mirrors() to ignore <uri> lines that don't end on the same line
210
211 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
212 Added code to the mta step in AT to parse the install packages list and
213 look for mtas and if it finds it emerge it.
214 Initial attempt at moving extra_packages early in the setup to only show
215 local USE flags relating to those packages.
216 .. abandoned local USE project. no right way to do it.
217
218 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
219 src/GLIUtility.py:
220 minor tweak to regex for parsing mirrors.xml
221
222 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
223 src/templates/x86ArchitectureTemplate.py:
224 make use of strict_start and strict_end in partition recreation
225
226 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
227 src/templates/x86ArchitectureTemplate.py:
228 add strict_start and strict_end parameters to _add_partition()
229 add _find_current_minor_for_part() function to help with resizing
230 fix logical/extended logic in _partition_delete_step()
231 in _partition_resize_step(), delete, recreate at new size, resize, delete
232 call resize2fs with no size argument so it fills entire partition
233 more logging
234 only delete, recreate, resize, delete if growing
235 pass new size to resize2fs in K
236
237 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
238 src/GLIStorageDevice.py:
239 call reorder_minors() from tidy_partitions() instead of
240 set_partitions_from_disk()
241 add code to reorder_minors() to take extended/logical into consideration with
242 non-free partitions
243
244 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
245 added a check of the length of the directory in /usr/src if under 6 characters
246 should fix bug 131809
247
248 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
249 src/GLIArchitectureTemplate.py:
250 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
251 and livecd-kernel
252
253 16 Apr 2006; Preston Cody <codeman@gentoo.org>
254 src/GLIGenDialog.py:
255 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
256
257 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
258 src/GLIInstallProfile.py:
259 change kernel-modules to not be so stupid
260
261 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
262 GLIMD: fix display problem with execute.pyhtml.
263 make tables better.
264
265 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
266 src/GLIInstallProfile.py:
267 fix handling of int/float for minor
268 src/templates/x86ArchitectureTemplate.py:
269 save/restore partition name
270 src/GLIStorageDevice.py:
271 support for partition name
272
273 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
274 touchups to add_profile in GLIMD to link to webgli
275 add a save to GLIMD profile button in webgli's saveprofile
276 gliserv.py:
277 initial attempt at custom networking info per client. hostname support only.
278
279 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
280 src/net/server/html/webgli/partitioning[234].pyhtml:
281 small fixes for new partioning code
282
283 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
284 src/GLIClientController.py:
285 record PID of secondary thread
286
287 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
288 src/GLIGenDialog.py:
289 small fix for new partitioning code
290
291 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
292 src/GLIStorageDevice.py:
293 add get_devnode()
294 fix up detect_devices() to detect cciss/ida arrays
295 src/templates/x86ArchitectureTemplate.py:
296 use get_devnode() instead of figuring out the devnode
297 skip first 3 steps if partition layout hasn't changed
298 wipe disk and create new disklabel before recreating partitions
299 src/GLIArchitectureTemplate.py:
300 use get_devnode() in local mount and fstab stuff
301
302 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
303 src/GLIStorageDevice.py:
304 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
305
306 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
307 src/templates/x86ArchitectureTemplate.py:
308 continue breakup/cleanup of partitioning code
309
310 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
311 src/GLIStorageDevice.py:
312 set disklabel to default for arch when clearing the partition table
313 src/templates/x86ArchitectureTemplate.py:
314 complete rewrite of first and second passes
315
316 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
317 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
318 allow iterating over Device object to get partitions
319
320 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
321 src/GLIStorageDevice.py:
322 allow access to Device object like a dict
323
324 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
325 src/GLIStorageDevice.py:
326 allow access to Partition object like a dict
327
328 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
329 src/templates/x86ArchitectureTemplate.py:
330 fail if any filesystems are mounted on the device being partitioned
331
332 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
333 src/GLIStorageDevice.py:
334 reorder minor numbers when loading partitions from disk to match the physical
335 partition order
336
337 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
338 src/GLIStorageDevice.py:
339 overhaul for supporting mac disklabels and partitions out of disk order
340 remove free space from inside extended partition when extended is removed
341
342 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
343 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
344 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
345 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
346 Added bash scripts, icons, and desktop entries from the ebuild to make my
347 life easier.
348
349 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
350 src/GLIStorageDevice.py:
351 raise an exception if the existing partitions are out of disk order
352 look for minors out of order instead of disk position
353
354 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
355 src/fe/dialog/gli-dialog and src/GLIGenDialog:
356 added networkless mode to gli-dialog.
357
358 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
359 src/templates/x86AT:
360 add windows detection code for grub. untested.
361
362 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
363 src/templates/x86ArchitectureTemplate.py:
364 bootloader and partitioning external commands log to compile_output.log
365 wait for device node to exist before resizing
366 add -v to ntfsresize command
367 src/GLIStorageDevice.py:
368 return start/end with ip structure
369 pad min ntfs size by 50 MB just to be safe
370 src/GLIArchitectureTemplate.py:
371 only install filesystem tools for partitions with a mountpoint
372
373 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
374 add error catching and text to saving profile dialogs
375
376 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
377 src/GLIPortage.py:
378 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
379 src/templates/x86ArchitectureTemplate.py:
380 fix checks for changed partitions so they will actually get deleted
381
382 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
383 src/GLIClientController.py:
384 slightly better error handling for pre-install failures
385
386 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
387 src/templates/x86ArchitectureTemplate.py:
388 proper return code checking for ext2/3 resizing
389
390 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
391 src/GLIClientController.py:
392 accept 'none' as well as 'null' for network type
393 src/GLIArchitectureTemplate.py:
394 ignore extended partitions in mount_local_partitions()
395 src/templates/x86ArchitectureTemplate.py:
396 use get_ordered_partition_list() instead of keys().sort() for new_part_list
397 check to make sure start sector for primary isn't less than end sector for
398 previous extended
399 src/GLIClientController.py:
400 write dns servers to /etc/resolv.conf
401
402 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
403 src/GLIPortage.py:
404 copy_pkg_to_chroot() uses compile_output.log for command output
405
406 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
407 only keep a 1000 line 'scrollback' buffer for the compile output and log file
408
409 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
410 src/GLIPortage.py:
411 add code make GLIPortage.py capable of being run stand-along for dynamic
412 stage3 generation and copying packages in a GRP-ish way
413 grp code fixups
414
415 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
416 src/GLIPortage.py:
417 ignore blank packages passed to get_deps() and emerge()
418
419 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
420 src/GLIUtility.py:
421 add get_chosts() function
422
423 *GLI-0.3 (12 Feb 2006)
424
425 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
426 src/templates/x86ArchitectureTemplate.py:
427 pull old start/end sector values from somewhere that actually has them
428 add logic for extended partition to code that makes sure new end sector
429 doesn't overlap start sector of next partitions
430 don't freak out if partition can't be deleted
431
432 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
433 src/GLIPortage.py:
434 run env-update at the end of copy_pkg_to_chroot()
435
436 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
437 src/templates/x86ArchitectureTemplate.py:
438 I'm a complete fscking dumbass. I recorded the end sector for partitions that
439 weren't being touched, but I never used it when recreating them...the end was
440 calculated from the size in MB instead :/
441
442 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
443 src/GLIArchitectureTemplate.py:
444 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
445 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
446 src/GLIPortage.py:
447 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
448 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
449 'resized' flag
450
451 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
452 src/GLIPortage.py:
453 short circuit and check vdb directly if package begins with '='
454
455 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
456 added more packages to extra_packages list in IP
457
458 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
459 src/templates/x86ArchitectureTemplate.py:
460 10 tries to create filesystem instead of 3
461 src/GLIPortage, src/GLIArchitectureTemplate.py:
462 ignore_missing flag for copy_pkg_to_chroot()
463
464 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
465 src/GLIPortage.py:
466 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
467
468 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
469 src/net/server/gliserv.py:
470 fix handling of 404 for real files
471 src/net/server/GLIServerProfile.py:
472 look for 'hostname' in attributes instead of 'name'
473
474 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
475 src/SimpleXMLParser.py:
476 initial support for 'include' in XML files
477 src/GLIStorageDevice.py:
478 initial support for %
479 src/GLIClientController.py:
480 add debugging statements to pre-install steps
481
482 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
483 webgli/configfiles:
484 check for key in etc_files['rc.conf'] to fix key error
485 webgli/timezone: small fix.
486 webgli/extrapackages: list-type fix
487 webgli/services: same
488 glimd: add/edit_client updates.
489
490 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
491 added configure.pyhtml to glimd. minor changes
492 to top and add_client. fixed up showargs.
493 added execute.pyhtml
494 changed register clients line in gliserv for name->hostname.
495 updated TODO.
496
497 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
498 src/net/server/*:
499 added add/del/edit client/profile.pythml for glimd.
500 updated templates, showclients, and gliserv.
501
502 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
503 src/net/server/*:
504 stupid threading module...
505
506 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
507 AT: rc.conf -> conf.d/clock
508
509 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
510 src/GLIPortage.py:
511 show 'Calculating dependencies for ...' in subprogress bar at beginning of
512 emerge()
513 src/GLIArchitectureTemplate.py:
514 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
515 in the chroot
516 remove _quickpkg_deps() and _portage_best_{visible,version}()
517 src/GLIUtility.py:
518 fail immediately in validate_uri() if provided URI can't be parsed
519 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
520 debug code in spawn()
521 use lower-level os.read() instead of file.read() because python sucks
522 src/templates/x86ArchitectureTemplate.py:
523 basic subprogress reporting for partitioning
524 total_steps was 1 too high
525
526 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
527 src/GLIUtility.py:
528 move parse_vdb_contents() to GLIPortage
529 src/GLIPortage.py:
530 remove all symlink fixups
531 ignore 'dir' entries in CONTENTS
532 call tar with -p
533
534 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
535 AT: bootsplash is now gensplash
536 gliserv: add advanced_mode to shared_info
537 webgli: Added advanced mode. mostly just disables a few screens.
538
539 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
540 src/GLIPortage.py:
541 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
542 added emerge()
543 update sub-progress after each package is emerged
544 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
545 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
546 remove link if it exists before moving content into place
547 src/GLIArchitectureTemplate.py:
548 install_packages() now calls emerge() in GLIPortage
549 change all calls to self._emerge() to self._portage.emerge()
550 comment out all emerge status checking...using exceptions now
551 call copy_pkg_to_chroot() directly for livecd-kernel
552
553 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
554 src/GLIArchitectureTemplate.py:
555 remove add_pkg_to_world() and copy_pkg_to_chroot()
556 copy installer.log to installer.log.failed on install failure
557 src/GLIUtility.py:
558 added get_keymaps()
559 spawn() takes any False argument for chroot instead of just None
560 src/GLIPortage.py:
561 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
562 change copy_pkg_to_chroot() to work properly with use_root=False
563 figure PORTAGE_TMPDIR properly
564
565 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
566 src/net/server/html/*:
567 converted showclients, load/saveprofile
568
569 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
570 src/GLIPortage.py:
571 exclude packages already in chroot vdb from binary deplist
572 chroot to use best_version for chroot's vdb
573 src/runtimedeps.py:
574 accept ROOT via commandline instead of env
575
576 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
577 src/runtimedeps.py:
578 remove passing of ROOT
579 src/GLIPortage.py:
580 modify get_deps() to get deptree for each package and merge into final list
581 remove depgraph class
582 add debugging code to get_deps()
583 src/GLIArchitectureTemplate.py:
584 combine code for GRP/compile in install_packages() into one block
585 debugging code in install_packages()
586
587 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
588 src/runtimedeps.py:
589 initial commit
590 src/GLIPortage.py:
591 use separate script for GRP deps
592 remove calls to portage module
593
594 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
595 src/GLIPortage.py:
596 initial commit
597 move some of portage function from GLIAT
598 flipped around a few function args
599 src/GLIArchitectureTemplate.py:
600 revamp install_packages() for new GLIPortage
601
602 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
603 src/GLIArchitectureTemplate.py:
604 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
605
606 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
607 src/net/server/gliserv.py:
608 wrap generated code in a class to isolate it a bit better
609 302 redirects work
610 don't use cgi.escape() for <% %>
611 src/net/server/html/webgli/*:
612 load/save profile
613 src/GLIUtility.py:
614 change /sbin/lspci to just lspci
615
616 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
617 src/GLIClientController.py:
618 change ordering of statements in CC run() while loop to not go past the end
619 of the array
620 src/GLIArchitectureTemplate.py:
621 removed redundant bind mounts
622
623 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
624 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
625 added a diagram by blackace from last night.
626 added the glossary in RTF format.
627
628 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
629 x86AT: separated out emerge/configure from running of bootloader
630 added MBR drive support to lilo.
631 these changes will likely not work.
632 AT: added setup_and_run_bootloader step.
633
634 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
635 src/net/server/gliserv.py:
636 call generated code in a function
637 src/net/server/html/webgli/*:
638 include top/bottom
639 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
640 src/GLIClientCongifuration.py:
641 install mode magic
642
643 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
644 src/GLIClientController.py:
645 use GLIException when there's an import problem
646 added debug code to show install_steps
647 src/templates/amd64ArchitectureTemplate.py:
648 add . to import path
649 proper path this time: ../../templates
650 src/GLIArchitectureTemplate.py:
651 add _portage_best_version() function
652
653 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
654 added initial glossary and gimli diagram to the docs directory.
655 modify gli-dialog to allow editing of the install_profile after loading XML.
656
657 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
658 src/net/server/html/webgli/:
659 converted globaluse, localuse, networkmounts, portagetree, and stageselection
660 moved saveclientconfig stuff into clientconfig
661 moved saveconfigfiles into config files
662 converted etc_portage and makedotconf
663 converted bootloader and kernel
664 convert daemons, extrapackages, networking, review, services, timezone, users
665 src/net/server/gliserv.py:
666 proper 404 handling for .pyhtml extension
667 HTML escape <% %> stuff
668 work around python's sucky regexes
669 src/GLIInstallProfile.py:
670 allow set_{rsync,ftp,http}_proxy() to accept empty values
671
672 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
673 src/net/server/gliserv.py:
674 initial commit of Legolas templating engine
675 302 redirects
676 src/net/server/html/index.html, src/net/server/webgli_template.html:
677 minor changes for new code
678 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
679 initial commit of the conversion from the monolithic WebGLIHandler.py to the
680 one file per path Legolas goodness
681 partitioning[2-4] done
682
683 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
684 webgli: dhcp options in CC and post-install.
685 updated comparison chart.
686 webgli: etc/portage/* and distcc support added. not too-well tested.
687
688 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
689 webgli_template.html: valign=top on left side.
690 webgli: fix bootloader boot_device. now working.
691 webgli: CC proxy done. post-install proxy in progress.
692
693 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
694 src/net/server/webgli_template.html:
695 increase padding for content cell to 7px and add colspan=2
696
697 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
698 webgli: added graphic bar on top
699 webgli: added hover effects on the links on the left
700 webgli: re-rendered header_bg.png to stretch without artifacts
701
702 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
703 webgli: make.conf disabling fixes for dynamic_stage3
704 fixed portage snapshot browse popup
705 all changes tested.
706 webgli: add debug mode to CC screen. the screen still needs lots of work.
707
708 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
709 added debug mode question to gli-dialog
710 added CC proxies to CC networking for gli-dialog
711 webgli: fixed skip CC networking if connection active
712 webgli: portage snapshot defaults to CD
713 webgli: bootloader mbr drive selection
714 webgli: USE flags unselectable if dynamic_stage3
715 webgli: manual extra packages and save button.
716
717 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
718 src/GLIUtility.py:
719 change ping count to 2
720 docs/comparison.html
721 initial commit
722
723 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
724 src/templates/x86ArchitectureTemplate.py:
725 fix map() issue with grub code
726 replace kernel_names and initrd_names loops with one-liners
727
728 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
729 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
730 initial gli-dialog support for recommended partitioning layout and clear.
731 failure cleanup now an option for gli-dialog.
732 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
733 added comparison list and updated TODO!
734
735 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
736 src/GLIArchitectureTemplate.py:
737 fix to stage1() debug code
738 fix to stage2() debug code
739
740 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
741 some more bootloader code fixes. forgot boot_device != mbr_device.
742
743 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
744 src/GLIStorageDevice.py:
745 fix to unallocated space merging when last one is after part 4
746
747 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
748 src/GLIArchitectureTemplate.py:
749 small fix to debugging code in copy_pkg_to_chroot()
750
751 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
752 more bugfixes with bootloader code
753 gli-dialog side appears to work
754
755 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
756 initial adding of boot_device to backend.
757 initial boot_device support added to gli-dialog.
758 some fixes of my poor coding
759
760 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
761 converted gli-dialog to use the install_package_list.
762 gtkfe has already been converted by AllanonJL
763 new way working in gli-dialog now and added to webgli.
764 added set/get_boot_device() to IP
765
766 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
767 get_install_package_list added to InstallProfile. This can be used by the FEs
768
769 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
770 src/templates/x86ArchitectureTemplate.py:
771 call ls with '-1 --color=no'
772
773 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
774 added warning (#9) to GRP ppl about stage3 tarballs
775
776 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
777 src/GLIArchitectureTemplate.py:
778 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
779 confused
780
781 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
782 removed protocols from rc.conf screens
783 finished initial rc.conf and make.conf in webgli
784
785 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
786 src/net/server/gliserv.py:
787 add -h option to usage()
788 show time and request URI in debug mode
789 show client IP in debug mode
790 just use IP instead of trying to do a reverse lookup
791
792 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
793 src/net/server/gliserv.py:
794 'classier' 401 message
795 proper commandline parsing
796 help via -h
797 user/pass can be specificed via commandline option
798
799 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
800 src/net/server/gliserv.py:
801 basic HTTP auth
802
803 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
804 src/net/server/gliserv.py:
805 dynamic module reloading (yipee!)
806 send 'Last-Modified' header for real files
807 respond to HEAD with just headers
808 src/net/server/handlers/WebGLIHandler.py:
809 icons for drives
810
811 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
812 src/net/server/handlers/WebGLIHandler.py:
813 initial 'pretty' partition table display support
814 clicking partition in 'pretty' display works instead of radio buttons
815 radio buttons and pretty display work together
816 META redirect instead of javascript
817 pretty display stretches across entire screen
818 'Recommended layout' and 'Clear drive' functions
819 properly catch exceptions from do_recommended()
820 src/GLIArchitectureTemplate.py:
821 replace preinst, copy, postinst, rm steps with qmerge
822 whoops...that shouldn't have been commented out
823 create image_dir with -p in copy_pkg_to_chroot()
824 more generic of symlink crappiness
825 new copy_pkg_to_chroot() actually works now
826
827 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
828 src/GLIStorageDevice.py:
829 initial generic disk support
830 fixes for add_partition() code
831 src/net/server/handlers/WebGLIHandler.py:
832 added support for creating generic disks
833 add new partition working
834 save and delete partitions
835
836 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
837 webgli: Partitioning making progress.
838
839 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
840 src/GLIArchitectureTemplate.py:
841 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
842 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
843 dir) and works around /etc/gconf symlink problem
844
845 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
846 webgli: lots of updates. preliminary partitioning. extra packages works.
847
848 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
849 src/net/server/gliserv.py:
850 httpd now supports HTTPS and falls back to HTTP if not available
851 make fallback actually work
852 src/net/server/SecureXMLRPCServer.py:
853 SecureSocketServer is now threaded
854
855 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
856 src/net/client/gliclient.py:
857 try to use HTTPS for XMLRPC first and fallback to HTTP
858 pretend mode
859 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
860 HTTPS XMLRPC goodness from samyron
861 pass name of certificate
862
863 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
864 wegli: daemons and services screens done.
865
866 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
867 webgli: networking and users screens
868 added return_redirect to handler.py
869 loading and saving install/client profiles works for webgli now
870 Review also done
871
872 *GLI-0.2 (27 Oct 2005)
873
874 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
875 src/templates/x86ArchitectureTemplate.py:
876 properly check for bootloader emerge exist status with exitsuccess()
877 log output of grub install command
878 add --batch --no-floppy to grub command
879 grubinstallstring only gets logged if debug is on
880 src/GLIUtility.py:
881 update progress bar to 100% when process finishes
882
883 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
884 src/GLIClientController.py:
885 added debugging code for the interaction between the 2 threads via Event()
886 src/GLIUtility.py:
887 doubled the buffer size in spawn()
888 bump buffer size up to 16384
889 only report progress in 5% increments
890 src/GLIArchitectureTemplate.py:
891 kernelpkgs.txt support code
892 above disabled because it sucks
893 added add_pkg_to_world()
894
895 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
896 src/GLIArchitectureTemplate.py:
897 use tar | tar to copy files in copy_pkg_to_chroot()
898 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
899
900 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
901 DEBUGGING ADDED TO AT. verbose field added to CConfig.
902
903 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
904 src/net/server/gliserv.py:
905 / maps to index.html
906 look for actual files in html/
907 src/net/html:
908 new template
909 src/GLIUtility.py:
910 added parse_vdb_contents()
911 src/GLIArchitectureTemplate.py:
912 added copy_pkg_to_chroot()
913 added debug code to dynamic-stage3
914 switch dynamic-stage3 to new method
915 lots of bug fixes from adding debug code
916
917 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
918 webgli initial bootloader support + changed make.conf.
919 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
920
921 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
922 src/GLIUtility.py:
923 horrible tangled mess of code that is tarball unpacking subprogress display
924 add unpack progress to portage snapshot
925 use read() instead of readlines() in spawn()
926 only update progress bar for whole percents
927
928 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
929 src/templates/x86ArchitectureTemplate.py:
930 change call to 'grub' to use GLIUtility.exitsuccess()
931 add definition of 'build_mode' in _configure_lilo()
932 src/misc/updategtkfe, src/misc/updateglid:
933 fix so subshell is called in root shell
934
935 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
936 src/net/server/handlers/WebGLIHandler.py:
937 stage screen launches URI browser in sized window with various properties set
938
939 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
940 src/misc/updategtkfe:
941 updated to actually work
942 remove previous snapshot and extracted dir before downloading
943 src/misc/updateglid:
944 updated to actually work
945 src/templates/x86ArchitectureTemplate.py:
946 fixed bug where grub code was looking for 'root+root+file_name2'
947
948 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
949 src/net/server/handlers/WebGLIHandler.py:
950 URI browser
951 added mirror selection
952 src/GLIUtility.py:
953 ls via ssh strips off ending *
954
955 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
956 more updates to webgli. stage selection.
957
958 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
959 updated webgli with preliminary Network Mounts support.
960
961 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
962 GenDialog: string formatting and yes/no label fixes.
963 added WebGLI template for gliserv.py
964 added WebGLIHandler as well as a definition for it in gliserv.py
965 updates to the webgli files even though they won't be there for long.
966 Utility: remove exception for non-existant grppkgs.txt until the new livecd
967 goes public.
968
969 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
970 src/net/server/gliserv.py:
971 override dict to not be so anal
972 main server now loads separate module to handle requests
973 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
974 split out profile URLs into separate handler function
975 move handlers into subdirectory
976 add Welcome and Clients handlers
977
978 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
979 src/GLIUtility.py:
980 raise exception if password prompt received twice
981
982 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
983 src/GLIUtility.py:
984 removed rot13ify()
985
986 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
987 src/net/server/gliserv.py:
988 allow for param to be passed multiple times in GET
989 no XMLRPC functions return None
990 modify POST request parsing to only create a list if needed
991 fix GET request parsing so the list creation for multiple values works
992 src/net/client/gliclient.py:
993 various typo and type mismatch fixes
994 exit after exception
995
996 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
997 src/net/client/gliclient.py:
998 initial commit
999 pass MAC to XMLRPC functions
1000 src/net/server/GLIServerProfile.py:
1001 rename GLIClientsProfiles to GLIServerProfile
1002
1003 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1004 src/net/server/gliserv.py:
1005 now handles POST requests
1006 move majority of request handling code to common_handler() to reduce code
1007 duplication
1008 profile loading
1009 client reg via XMLRPC goes into SharedInfo()
1010 /showclients redesign
1011 template fixes
1012 allow handler functions to add/change headers
1013 save profile
1014
1015 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1016 src/net/server/GLIClientsProfiles.py:
1017 initial commit
1018 src/net/server/template.html:
1019 initial commit
1020 src/net/server/gliserv.py:
1021 add template mojo
1022
1023 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1024 src/net/server/gliserv.py:
1025 XMLRPC mojo
1026
1027 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1028 src/GLIArchitectureTemplate.py:
1029 add code in _edit_config() to comment line where variable is defined
1030 previously
1031 insert new line under previous definition of variable if it exists
1032 small _edit_config() cleanup
1033 src/GLIStorageDevice.py:
1034 add clear_partitions() function
1035 new sizes for recommended partition layout
1036 automatically calculate swap size for recommended layout
1037
1038 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1039 src/templates/x86ArchitectureTemplate.py:
1040 fat16 mojo
1041
1042 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1043 src/GLIStorageDevice.py:
1044 prevent do_recommended() from being run twice
1045 rewrite do_recommended() to be more robust
1046 src/GLIArchitectureTemplate.py:
1047 rework _edit_config() to not write duplicate entries
1048
1049 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1050 src/GLIStorageDevice.py:
1051 added do_recommended() function to automatically created 256M/1G/* layout
1052
1053 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
1054 src/gli-dialog.py: added set_distcc to the list
1055 GenDialog: added set_distcc. untested.
1056 IP: added install_distcc flag.
1057 AT: added install_distcc function based on the flag. runs after build_kernel
1058 changed AT spawn command for distcc for nodeps.
1059
1060 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1061 src/GLIUtility.py:
1062 add rot13ify() function
1063
1064 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
1065 src/GenDialog.py:
1066 added a sentence of text. unchecking support added.
1067
1068 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
1069 src/GLIUtility.py:
1070 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
1071 src/GenDialog.py:
1072 still working on extra_packages. transformed the list to new format.
1073 added GRP indication to list. untested.
1074 TODO lists updated.
1075 src/fe/dialog/gli-dialog.py:
1076 spelling mistook.
1077
1078 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1079 src/GLIUtility.py:
1080 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
1081
1082 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1083 src/GLIUtility.py:
1084 add get_directory_listing_from_uri()
1085 add http support to above
1086 add ftp support to above
1087 add scp support to above
1088 src/GLIArchitectureTemplate.py:
1089 "0" instead of 0 for key of single-element dict passed to _edit_config()
1090
1091 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
1092 value_only -> only_value
1093
1094 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
1095 gutted out all of etc_portage structure since it is now all handled by
1096 etc_files
1097
1098 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1099 src/GLIArchitectureTemplate.py:
1100 install_packages() sends progress update notifications
1101 src/templates/x86ArchitectureTemplate.py:
1102 increase sleep to 5s between format tries
1103 src/GLIClientController.py:
1104 pass 'self' to AT instead of 'self._pretend'
1105
1106 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
1107 logger -> logger.log in x86AT
1108
1109 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
1110 added set_etc_portage to IP. debugging gli-d's support for it.
1111
1112 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1113 src/templates/x86ArchitectureTemplate.py:
1114 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
1115
1116 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1117 src/GLIArchitectureTemplate.py:
1118 add _portage_best_version() function and rework install_packages() to allow
1119 for future X of Y tracking
1120 Use best_visible instead of best_version
1121 tracked down and fixed missing = causing empty install extra packages
1122 use = when emerging also
1123 quickpkg hokey pokey
1124 run _get_packages_to_emerge() again with -pk
1125
1126 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
1127 src/ArchTemplate:
1128 removed install_xorg_x11, and put the xorg.conf copying at
1129 the end of install_packages.
1130 added updateglid to /src/misc
1131 updated all core files with new GPL notice and copyright statement.
1132
1133 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1134 src/GLIUtility.py:
1135 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
1136 a snapshot in /mnt/cdrom/snapshots/
1137 get_snapshot_from_cd() adds file:// at the beginning
1138 change calls to extra package special case functions to 'self.blah'
1139
1140 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
1141 src/ArchTemplate: changed "voodoo".
1142 changed order of portage sync methods. made a fallback to webrsync if
1143 normal emerge sync fails.
1144 removed get_sources_from_cd because it is obsolete.
1145 add special cases to install_packages. remove fatal exception on package
1146 install failure b/c the box will still be bootable.
1147 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1148 handled in the FEs.
1149 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1150 awaiting testing.
1151
1152 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1153 src/GLIStorageDevice.py:
1154 global try/except block around fs resizable detection code
1155 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1156 install-failed cleanup function
1157
1158 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1159 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1160
1161 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1162 GLIGenDialog:
1163 add drive choices for loaded configs.
1164 force snapshot for dynamic_stage3
1165 init the snapshoturi input to the cd snapshot if not already selected.
1166 if dynamic_stage3, skip the make.conf step.
1167 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1168 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1169
1170 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1171 src/GLIArchitectureTemplate.py:
1172 manually call MAKEDEV in stage3-dynamic code
1173 copy /etc/inittab.old to /etc/inittab in chroot
1174 src/GLIUtility.py:
1175 add beginning of validate_uri() function
1176 add file:/// support to validate_uri()
1177 single quotes when setting livecd password
1178
1179 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1180 src/GLIGenDialog.py:
1181 change getmountpoint() to get_mountpoint()
1182 src/misc/updategtkfe:
1183 committed script to automatically download latest snapshot and run gtkfe
1184 src/templates/x86ArchitectureTemplate.py:
1185 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1186 src/GLIArchitectureTemplate.py:
1187 give tmp_minor an initial value in mount_local_partitions so that the value
1188 remain from the previous drive
1189
1190 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1191 src/templates/x86ArchitectureTemplate.py:
1192 Fix _configure_lilo() for IP using GLISD stuff
1193 src/GLIArchitectureTemplate.py:
1194 install_cron_daemon() treats "none" specially
1195
1196 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1197 old patch from Steven Mertens to resolve bug #96642
1198 numerous asthetic changes to GenDialog, no real functionality changes though.
1199 strings renamed for global use if necessary.
1200 fix all three parts of bug 102291
1201 disable set_etc_portage until fully-written.
1202
1203 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1204 src/GLIClientController.py:
1205 lower-case http/ftp proxy envvars
1206
1207 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1208 src/GLIClientController.py:
1209 log end of pre_install steps to aid in debugging
1210 src/templates/x86ArchitectureTemplate.py:
1211 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1212
1213 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1214 src/GLIArchitectureTemplate.py:
1215 check to make sure that the device node we're wait for to exist isn't of
1216 type 'free'
1217
1218 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1219 src/GLIGenDialog.py:
1220 convert install_packages to list in set_extra_packages()
1221 check return code of checklist() call in "Manual" section
1222 *actually* fix the first problem
1223
1224 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1225 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1226 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1227
1228 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1229 src/GLIArchitectureTemplate.py:
1230 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1231
1232 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1233 Add CDATA support to SimpleXMLParser and add utility functions for it.
1234
1235 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1236 src/GLIArchitectureTemplate.py:
1237 Fix case where vixie-cron is specified as a full package atom, as we still
1238 don't want to run 'crontab /etc/crontab' for it.
1239
1240 *GLI-0.1 (3 Aug 2005)
1241
1242 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1243 add scp to list of is_uri() so GenDialog doesn't complain.
1244 fixed livecd-kernel bug in bootloader code.
1245 fixed gendialog for dynamic_stage3 instead of "networkless"
1246 change bootloader to allow for both initrd and initramfs.
1247 fix IP for dynamic_stage3.
1248 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1249
1250 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1251 Added full scp:// URI support to get_uri() in GLIUtility
1252 Remove "networkless" from dynamic stage3 if locic.
1253 Remove print statement from scp:// code.
1254 Change scp code to check for "assword: " instead of "Password:"
1255 Fix post-install network code to create net.eth1+ symlink correctly
1256 Check to make sure pkg can be split on / and some debugging code
1257 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1258 SimpleXMLParser handles True/False/None correctly now
1259 Comment out above fix
1260 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1261
1262 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1263 Removed a FIXME in the GLIClientConfiguration that is no
1264 longer needed.
1265
1266 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1267 Default to x86 in ClientConfig
1268 Typo in build-a-stage3 code.
1269 Remove MAKEDEV call in build-a-stage3 postscript.
1270
1271 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1272 Rewrote init of IP for gli-d. Other GenDialog updates.
1273 allow network_type to be None in CConfig.
1274
1275 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1276 Add _dynamic_stage3 option to IP.
1277 Add check for that option to dynamic stage3 code in ArchTemplate.
1278 Fix code to determine default route in get_eth_info() in GLIUtility.
1279 Fix serialization of dns-servers in ClientConfig.
1280
1281 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1282 changed default values of cron/logger in IP.
1283 moved GenDialog IP init out to the individual files. gli-dialog's version
1284 will change quite a bit.
1285
1286 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1287 added ppcArchTemplate. blank now. working on yaboot.
1288 modified ArchTemplate for amd64 and ppc custom kernels.
1289 skeleton implementation of _configure_yaboot.
1290 small fixes to other templates.
1291
1292 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1293 GenDialog updates. changed comment in IP.
1294
1295 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1296 src/GLIInstallProfile.py:
1297 Fix codeman's screwup of changing the service seperator to ',' in the parser
1298 without changing it in the serialization code! Also document this in a
1299 comment so you find it easier. Everybody needs to make sure they update
1300 their install profiles!
1301
1302 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1303 src/GLIArchitectureTemplate.py:
1304 Fix casting of list to string and concat of None with string, as well as
1305 commented prototype of checking that mounting actually worked (found a case
1306 where mount can return success, but the mount won't be done).
1307
1308 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1309 src/templates/x86ArchitectureTemplate.py:
1310 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1311 checking for the device, and sleeping 1 second each time.
1312
1313 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1314 src/templates/x86ArchitectureTemplate.py:
1315 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1316 bootloader works again. Also rename _install_{grub,lilo} to
1317 _configure_{grub,lilo} since they don't install the loaders anymore
1318 themselves.
1319
1320 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1321 fix global USE flags to not include the arch types at the end.
1322 updates to GenDialog and gli-d.
1323
1324 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1325 fixing bootloader code for no initrd and initrd->initramfs naming change.
1326
1327 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1328 Proper comments and parameters to GLIException in install_mta()
1329 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1330 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1331 list_tarball_from_mirror() to eliminate blank last item.
1332
1333 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1334 Added stage3 generation code.
1335
1336 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1337 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1338 Mild changes to GenDialog.
1339
1340 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1341 Remove separate install step configure_rc_conf() since it's handled by
1342 update_config_files()
1343 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1344 function is called twice on the same file.
1345
1346 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1347 Missing \ in sed in _get_packages_to_emerge()
1348 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1349 Check in _quickpkg_deps() to ignore blank package names returned from
1350 _get_packages_to_emerge()
1351
1352 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1353 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1354 in the dialog.py gauge code.
1355
1356 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1357 Add code to update_config_files() to go through etc_files and update stuff.
1358 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1359 Only use float() in partition xml parsing code if type == "free"
1360
1361 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1362 finished almost all internationalization of GenDialog.
1363 attempt at fixing rc.conf function. moved 3 generate functions out of
1364 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1365 added dialog.py to the fe/dialog directory so it actually gets used.
1366
1367 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1368 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1369
1370 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1371 fix extra entry in list_mirrors()
1372 beginning internationalization runthrough.
1373
1374 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1375 added dialog.py to /src temporarily until it gets accepted upstream.
1376 fix for unused value in form in dialog.py and changed heights.
1377 fix GenDialog forms.
1378
1379 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1380 Changed hostname/domainname for new baselayout.
1381 Changed _add_to_runlevel errors to logs.
1382 Updated TODO list to show status of GenDialog
1383 More updates to GenDialog including two checklists that probably won't work.
1384 update IP to use comma-separated list instead of space separated for services.
1385
1386 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1387 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1388 GenDialog as it gets closer to completion.
1389
1390 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1391 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1392 instead of int() in add_partition_device_partition() for minor (closes 96804)
1393
1394 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1395 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1396 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1397 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1398
1399 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1400 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1401 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1402 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1403 Fix undefined variable 'output' issue in spawn().
1404
1405 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1406 More updates to GenDialog and gli-d.
1407
1408 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1409 Modify list_mirrors() to return a list of mirror URL/name pairs.
1410
1411 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1412 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1413 get subarch.
1414
1415 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1416 Backend partitioning will create disklabel is none exists. Installprofile
1417 defaults to "" now instead of "msdos" for disklabel type. Fix for
1418 mount_local_partitions() to remember device along with minor in the
1419 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1420 add else block to log unsupported netmount types to mount_network_shares()
1421
1422 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1423 src/GLIArchitectureTemplate.py:
1424 Refactor kernel_compile common stuff, fix 2.4 build process.
1425 src/fe/cli/clife.py:
1426 Logging system.
1427 src/GLIUtility.py, src/GLIStorageDevice.py:
1428 Add comments about re-writes needed for boxes without sysfs.
1429
1430 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1431 src/GLIArchitectureTemplate.py:
1432 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1433 'make dep' call for custom compile. build_mode support for prepare-only and
1434 none types completed. custom compile function chains shell functions in
1435 spawned script, to allow for catching all errors.
1436
1437 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1438 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1439 and GenDialog. other gendialog updates as well. kernel updates untested.
1440
1441 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1442 src/GLIInstallProfile.py:
1443 Change structure of etc-portage stuff. The serialization was broken before my
1444 last commit, and I am the only person that's ever used it. The new schema is
1445 as follows:
1446 <etc-portage>
1447 <file name="package.mask"/>
1448 <file name="package.unmask">
1449 <entry atom="sys-kernel/openmosix-sources"/>
1450 </file>
1451 <file name="package.use">
1452 <entry atom="sys-libs/db">
1453 -java
1454 </entry>
1455 <entry atom="dev-libs/cyrus-sasl">
1456 -ldap
1457 </entry>
1458 </file>
1459 </etc-portage>
1460
1461
1462 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1463 src/GLIInstallProfile.py:
1464 Add new entry for gli-profile/kernel-build-method item. Add missing
1465 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1466 keys in the same order.
1467
1468 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1469 src/GLIArchitectureTemplate.py:
1470 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1471 was repeatedly appended to make.conf.
1472
1473 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1474 src/GLIArchitectureTemplate.py:
1475 Put some Linux-2.6 specific code under a if statement. Store list of
1476 successfully mounted swap device for using swapoff. Add proper error checking
1477 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1478 'file'. Clean up some redundant code (thanks to pychecker).'
1479
1480 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1481 Fix typos: get_extended() instead of get_extended_partition(). Added
1482 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1483 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1484
1485 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1486 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1487 in add_network_interface.
1488
1489 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1490 src/GLIArchitectureTemplate.py:
1491 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1492 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1493 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1494 prepare_chroot.
1495
1496 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1497 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1498 +src/fe/installer-gtk:
1499 Add new automated CLI frontend. Add scripts that are the intended means to
1500 use each frontend.
1501
1502 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1503 src/GLIClientController.py:
1504 Add null type to network config, for cases where the interface is already up
1505 and should not be touched (netboot for example).
1506
1507 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1508 src/GLIArchitectureTemplate.py:
1509 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1510 string!. Try to use binary packages if available by default.
1511
1512 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1513 src/GLIArchitectureTemplate.py:
1514 More error checking for _add_to_runlevel, to ensure that the init script
1515 actually exists before we try to add it. set_services phase must take place
1516 after the package installation, otherwise the init scripts might not exist.
1517 Find the correct init script for the cron and logging daemons, and add that
1518 instead of the package atom.
1519
1520 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1521 src/GLIArchitectureTemplate.py:
1522 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1523 usage of 'file' to 'contents' for the variable name, as it shadows
1524 __builtin__.file.
1525
1526 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1527 src/GLIArchitectureTemplate.py:
1528 Add MTA install code, and include MTA install phase. Ensure
1529 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1530 for 'none' kernel config for build_kernel phase. Put kernel_script in
1531 /var/tmp instead of /root for build_kernel phase.
1532
1533 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1534 Rename mta variables to match syslog/cron variables.
1535
1536 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1537 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1538 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1539 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1540 src/templates/.cvsignore, src/tests/.cvsignore:
1541 Refactor partition formatting again to include error checking. Allow 'none'
1542 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1543
1544 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1545 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1546 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1547 only have a single spawn call.
1548
1549 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1550 refixed samyron's fix of set_architecture_template.
1551
1552 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1553 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1554 be executable.
1555
1556 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1557 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1558 error checking when you call set_architecture_template.
1559
1560 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1561 moved the mkfsopts input to the partition options menu instead of the during
1562 the creation process. updated GenDialog to say it supports reiserfs v3.
1563
1564 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1565 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1566 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1567 Add support for other partition types to dialogfe.
1568 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1569 avoid integer overflows and wraparounds.
1570
1571 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1572 Removed start/end from XML output and added mkfsopts to partitioning info.
1573 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1574 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1575 in GLIClientConfiguration. Change from .1 and .9 to constants for
1576 partitioning. Fix free space overwriting bug. Remove a few unused functions
1577 from rewrite. Fix call to get_partition_at()
1578
1579 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1580 Updates to GenDialog and dialogfe.
1581
1582 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1583 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1584
1585 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1586 more GenDialog updates to partitioning.
1587
1588 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1589 Indenting issue in GLISD/get_ordered_partition_list.
1590 updates to GenDialog partitioning and added default UTC for timezone in IP.
1591
1592 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1593 Added GLISD.get_model()
1594
1595 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1596 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1597 More updates to GenDialog :)
1598
1599 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1600 Added get_interface_realname() function.
1601
1602 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1603 Added auto-save of CConfig and copying to new /root after install.
1604 yet even more GenDialog updates.
1605
1606 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1607 removed print statement from GLISD. more updates to GenDialog.
1608
1609 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1612 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1613 places in GLIClientConfiguration.
1614
1615 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1616 Fix mount_local_partitions(), configure_fstab(), and
1617 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1618 A few more fixes for templates/x86Archtemplate
1619
1620 27 May 2005; Preston Cody <codeman@gentoo.org> :
1621 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1622 a work in progress.
1623
1624 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1625 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1626 directly. GLISD can now handle data imported from XML.
1627
1628 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1629 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1630 handle blank (no disklabel) disks.
1631
1632 20 May 2005; Preston Cody <codeman@gentoo.org> :
1633 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1634 up, documented, and separated out serialization and grouped all sections.
1635
1636 19 May 2005; Preston Cody <codeman@gentoo.org> :
1637 Reorganization of ClientConfiguration and gutting of unused functions.
1638 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1639
1640 18 May 2005; Preston Cody <codeman@gentoo.org> :
1641 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1642
1643 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1644 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1645 partitioning. CC serializes install profile to disk and prepare_chroot()
1646 copies it into /mnt/gentoo/root
1647
1648 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1649 Moved URI parsing into new function parse_uri()
1650
1651 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1652 Added XMLParser module.
1653
1654 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1655 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1656 Minor fix to is_uri() regex to allow hyphens in hostname.
1657
1658 12 May 2005; Preston Cody <codeman@gentoo.org> :
1659 Updated finishing_cleanup for new unmounting method from agaffney.
1660
1661 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1662 Fix GLILogger to use correct time format string. Fix _edit_config() to
1663 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1664 unicode support to is_realstring().
1665
1666 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1667 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1668 return value instead of non-zero. Add code to output a traceback to the
1669 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1670 instead of --nocolor.
1671
1672 10 May 2005; Preston Cody <codeman@gentoo.org> :
1673 Added GLIGenDialog.py to make a generic class for the dialog functions that
1674 can be used by both dialogfe and the netfe/be. updated both for new filename.
1675 date changes. 2004->2005.
1676
1677 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1678 Removed 'quiet=True' from spawn() calls
1679
1680 10 May 2005; Preston Cody <codeman@gentoo.org> :
1681 Updated GLIUtility with patches from chotchki. Also added documentation
1682
1683 9 May 2005; Preston Cody <codeman@gentoo.org> :
1684 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1685 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1686 from bug #89683, mostly touchups.
1687
1688 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1689 GLIStorageDevice cleanup patch from bug #91761
1690
1691 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1692 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1693 _edit_config(). Error logging casts 'error' to str
1694
1695 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1696 Exceptions received in CC are logged before being passed to the FE. Added
1697 code to CC to handle exceptions *not* thrown by the installer itself.
1698
1699 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1700 get_max_mb_for_resize() returns -1 if not self.resizeable
1701
1702 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1703 More dirty rsync hacks :-/
1704
1705 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1706 Patches from chotchki (bug #90325) to improve CC networking. untested.
1707
1708 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1709 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1710 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1711 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1712 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1713 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1714 _get_packages_to_emerge()
1715
1716 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1717 Added group-adding code to set_users in ArchTemplate
1718
1719 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1720 Added post-install script code
1721
1722 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1723 Fixed encapsulation issues in GLIClientController (bug #90141)
1724
1725 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1726 Update resizing code in GLIStorageDevice
1727
1728 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1729 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1730
1731 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1732 Reverted change to ArchTemplate and added support for commented line in old
1733 code.
1734
1735 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1736 Changed _edit_config() to modify value in-place instead of commenting out and
1737 adding the new value to the end of the file.
1738
1739 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1740 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1741 Also updated TODO list.
1742
1743 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1744 Use blackace's one-liner to add comments for all function for use with
1745 pythondoc.
1746
1747 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1748 Moved 'end >= device_sectors' check out of loop to check for next partition's
1749 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1750 Partitioning code now tracks start/end of extended for placing logicals. End
1751 point of logical is now adjusted along with start.
1752
1753 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1754 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1755 the way of partitioning from a blank disk. Add int() around access to minor
1756 key in partition information due to new partition code leaving them as float.
1757
1758 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1759 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1760
1761 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1762 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1763
1764 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1765 Added support for DHCP options and MAC addresses in the InstallProfile.
1766
1767 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1768 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1769 sed to properly strip out junk.
1770
1771 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1772 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1773 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1774
1775 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1776 Fixed indent problem in GLICController
1777
1778 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1779 Check for disklabel type "loop" and use the device name without a minor.
1780
1781 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1782 Remove /tmp/compile_output.log and /var/log/install.log when install is
1783 complete. Added code to (hopefully) keep 2nd thread running after install.
1784 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1785 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1786 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1787
1788 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1789 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1790 when unpacking tarball.
1791
1792 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1793 rewrote filesystem_tools. looks like it works so ripping out all the old
1794 filesystem_tools code.
1795
1796 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1797 Changed the print statements to logging in the partitioning BE code.
1798 the logger may need to be imported to the x86archtemplate. unknown yet.
1799 Added the finishing_cleanup function.
1800 added a fix to the logger from BenUrban
1801
1802 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1803 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1804 URIs. The blank uri check has been commented out.
1805 ripped out error checking of set_services. this is done by _add_to_runlevel.
1806
1807 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1808 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1809
1810 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1811 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1812 the install profile if available. Commented out spawn() debugging prints
1813
1814 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1815 small changes to setup_network_post. moved adding to runlevel of net.x to
1816 after the device gets symlinked. added domainname runlevel command.
1817
1818 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1819 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1820 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1821 spawn() call in livecd-kernel code to pass environment variables.
1822 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1823 the install profile if available.
1824
1825 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1826 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1827 to handle installing the livecd kernel into the new system.
1828
1829 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1830 should emerge hotplug and coldplug before adding them to runlevel.
1831
1832 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1833 took chroot out of grub_install command.
1834
1835 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1836 Changed chroot wrapper code in spawn() to write the wrapper the python way
1837 instead of the bash way to avoid quote conflicts. Added
1838 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1839 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1840 as it breaks the piping.
1841
1842 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1843 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1844
1845 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1846 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1847 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1848 GLIInstallProfile.
1849
1850 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1851 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1852 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1853 into /mnt/gentoo in prepare_chroot()
1854
1855 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1856 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1857 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1858 to start/end sectors
1859
1860 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1861 Add 2>&1 to cmd in spawn()
1862
1863 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1864 Modified GLIUtility.exitsuccess() to work with return value from
1865 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1866 creates wrapper script for commands run inside chroot so multiple commands
1867 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1868 for the generated script from spawn()
1869
1870 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1871 Removed default values for stage tarball URI and portage tree URI from
1872 InstallProfile. These should be set by the FEs. also added services step to
1873 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1874 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1875
1876 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1877 Small fix for setting the default gateway. Also added feature to dialogfe.
1878
1879 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1880 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1881
1882 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1883 Fixed a bunch of true -> True typos. lots of em
1884 only write new resolv.conf if there are dns servers listed.
1885
1886 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1887 Commented out 'display_on_tty8=True' in start_portmap()
1888
1889 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1890 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1891
1892 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1893 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1894 lang parameter to __init__()
1895
1896 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1897 updates to TODO list.
1898
1899 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1900 Initial code for quickpkg GRP support. Fix loop to grab packages from
1901 'emerge -p blah'
1902
1903 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1904 check for dhcp in the network stuff and emerge it if it is.
1905 added quickpkg to TODO list
1906
1907 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1908 Changed the raising of 'warning' exceptions to a simple log of the error
1909 so that the installer can continue.
1910
1911 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1912 Some big changes. First, changed most output to display_on_tty8.
1913 Second, added log lines to all templates. Some smaller fixes such as typos.
1914 Also did some cleanups of old commented lines.
1915
1916 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1917 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1918 Undo change with fix. Escaping fix in GLIStorageDevice.py
1919
1920 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1921 more updates to TODO list. hopefully we'll soon start removing items instead
1922 of adding them.
1923
1924 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1925 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1926
1927 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1928 updated TODO list. (again)
1929
1930 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1931 changed output of portmap start to display_on_tty8.
1932 fixed bootloader for udev and multiple kernels
1933 fixed custom kernel config (again)
1934
1935 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1936 changed default value of CC._enable_ssh to True because this is smart.
1937 added code to allow custom kernel .config. may be unstable and break. sorry.
1938
1939 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1940 partition() now waits until after it checks for partition flags before delete
1941 the partitions :P
1942
1943 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1944 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1945 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1946 blank.
1947
1948 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1949 Various fixes related to the add_users function. Still not yet finished.
1950 Added things to the TODO list. Lets start using that!
1951
1952 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1953 Added code to x86Template to format newly created partitions. Also added
1954 some error checking code. GLIStorageDevice passes 'minor' with data to
1955 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1956 mounting code.
1957
1958 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1959 Took out unnecessary setting of random livecd root password. the cd already
1960 sets it randomly.
1961
1962 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1963 Took out an unneeded step from CC's run()
1964
1965 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1966 Attempt at detecting and adding windows partitions to lilo.
1967
1968 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1969 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1970 partition. fixed misc exit_status => exitstatus typo.
1971
1972 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1973 Added basic code for resizing filesystems with pyparted. Fixed code for
1974 resizing ntfs and ext2/3.
1975
1976 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1977 Fixed partition() in x86Template so that it scans through logicals and deletes
1978 before deleting containing extended partition. Also clears partition table to
1979 be safe before third pass.
1980
1981 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1982 Added mount_network_shares. not able to test it from this computer.
1983 will test when i get back to school.
1984 also added start_portmap to the client_controller as an always-do.
1985 agaffney says this is needed for NFS mounts to work.
1986
1987 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1988 Partial rewrite of partitioning code in x86Template. No longer shells out to
1989 parted to perform actions, now uses all pyparted calls. Code "works" in a
1990 test, but still needs lots of TLC. Also modified tests/install.py to work
1991 with x86Template and GLIClientConfiguration.
1992
1993 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1994 Initial move of partitioning code from ArchTemplate to x86Template.
1995
1996 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1997 Added grp_install and services to InstallProfile. forgot about the set_root_password
1998
1999 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
2000 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
2001 agaffney. Test Install ran very well (skipping partitioning).
2002
2003 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
2004 My mid-day update. rewrote mount_local_partitions for order of mounting.
2005 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
2006 partition format. fixed a few _edit_configs. some may still have eluded me.
2007
2008 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
2009 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
2010 to test it.
2011 Just finished mount_local_partitions in GLIArchitectureTemplate
2012
2013 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
2014 Added get_num_sectors() to GLIStorageDevice.
2015
2016 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
2017 GLIStorageDevice now tracks partition boundaries in sectors instead of
2018 cylinders.
2019 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
2020 from GLIInstallProfile.
2021
2022 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2023 GLIStorageDevice returns "unknown" instead of "" for get_type()
2024
2025 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2026 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
2027 actually work. Commented out resizability checking code for speed.
2028
2029 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2030 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
2031 in GLIStorageDevice at the suggestion of plors
2032
2033 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2034 Added a function to GLIUtility to pull a value from a make.conf-style config
2035 file. Minor type fix to GLIInstallProfile.py
2036
2037 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2038 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
2039 Separated network mounts from partition data structure in GLIInstallProfile
2040
2041 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
2042 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
2043 can be resized.
2044
2045 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
2046 Added some of the final functions to GLIInstallTemplate.
2047 Yes this project is still active despite rare use of the Changelog!
2048
2049 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2050 Added the GLIPartitionTools.py file. This is a temporary insertion of
2051 partitioning tools that will eventually go into their own package.
2052
2053 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2054 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
2055 run-time for the program). Added __init__(install_profile,
2056 client_configuration) to GLI.InstallProfile. This sets install_profile and
2057 client_configuration once so as to avoid constantly passing stuff every time
2058 we call a method.
2059
2060 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2061
2062 Added another private method to GLI.InstallTemplate. _edit_config() modifies
2063 config files without messing up all the other stuff in them. This will be
2064 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
2065
2066 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2067
2068 Added GLI.InstallTemplate framework. This is not yet functional. However,
2069 it does have a few basic things. I added two private methods. One is
2070 _depends(). This will be used for dependency checking (ie. unpacking a
2071 tarball requires that partitioning has been done). The other is
2072 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
2073 instead of being run in the liveCD environment, it runs in the chroot. This
2074 requires a bit of fork() magic, so I isolated the code. Hope to work more
2075 this week to get this class formed...
2076
2077 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
2078 Added SAX parsing. Made GLI.InstallProfile a subclass of
2079 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
2080 to be lists instead of tuples to allow for easier modification (mutable,
2081 rather than immutable objects). Updated existing pydoc and added more.
2082 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
2083 GLI.py a bit. Fixed all accessors to use self references.
2084 Added initial unit test code.
2085
2086 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
2087 Added initial changelog. Setting up the basic structure of the CVS repository
2088 for the project. Added the UML class diagram in docs. Added a skeletal GLI
2089 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20