/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1866 - (show annotations) (download)
Sat Nov 17 20:12:40 2007 UTC (7 years, 1 month ago) by agaffney
File size: 85985 byte(s)
add xdm, gdm, and kdm to package list
1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2007 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.686 2006/09/15 16:37:11 agaffney Exp $
4
5 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIInstallProfile.py:
7 add xdm, gdm, and kdm to package list
8
9 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
10 src/fe/dialog/gli-dialog.py:
11 modify root mountpoint check in gli-dialog to use a for/else and notify the
12 user why they're not being allowed to leave the screen
13
14 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
15 src/templates/x86ArchitectureTemplate.py:
16 move around parentheses to fix bug 179528
17
18 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
19 src/fe/gtk/InstallFailed.py:
20 correct bugzilla location for bug 178144
21
22 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
23 src/GLIArchitectureTemplate.py, src/fe/gtk/gtkfe.py:
24 fix error in debug mode for bug 178475
25 force install_type to networkless for gtkfe
26
27 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
28 src/GLIArchitectureTemplate.py:
29 set TIMEZONE in /etc/conf.d/clock for bug 158882
30
31 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
32 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
33 src/fe/gtk/InstallFailed.py, src/fe/gtk/gtkfe.py:
34 make install log location consistent throughout code
35 'View Log' button in gtkfe now looks for active and failed log
36
37 04 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org>
38 src/GLIInstallProfile.py:
39 Added x11-themes/gentoo-artwork-livecd to the list of extra packages.
40
41 04 Jan 2007; Preston Cody <codeman@gentoo.org>
42 ClientController:
43 took out the preinstall steps. these will now be handled by the frontends.
44 The actual code for the steps can be put in GLIUtility if necessary.
45 IP:
46 Took out partitioning. Added mounts.
47 Moved root mount point over from CF
48 Removed RP-PPPoE. was never used.
49 AT:
50 reordered functions. removed references to the client-config
51 fixed fstab and other locations that used mountpoints to use the new mounts.
52 removed unused rc.conf function.
53 other smaller touchups.
54 gli-dialog:
55 install_profile() to self._install_profile
56 fix reference to arch instaed of self._arch
57 x86AT:
58 fixed code to use mounts instead of partitioning.
59
60 01 Jan 2007; Preston Cody <codeman@gentoo.org>
61 fixing all instances of WINDOWSKEYS to WINDOWKEYS
62 added space in AT debug line.
63 more general updates in an effort to get the code functional
64
65 29 Oct 2006; Preston Cody <codeman@gentoo.org>
66 gli-dialog:
67 more rearranging of code. Tossed the review menu and not calling show_settings
68 not sure how those are going to turn out just yet.
69
70 22 Oct 2006; Andrew Gaffney <agaffney@gentoo.org>
71 src/Partitioning.py:
72 first round of refactoring for Partitioning.py (was GLISD)
73
74 22 Oct 2006; Preston Cody <codeman@gentoo.org>
75 gli-dialog:
76 added in the rest of the code from GLIGenDialog.
77 will start picking at it now.
78 moved the early questions such as advanced_mode/networkless
79 into functions in the GLIDialog class.
80
81 21 Oct 2006; Preston Cody <codeman@gentoo.org>
82 ClientController and gli-dialog and GLIGenDialog:
83 removing GenDialog, this code will be put into gli-dialog
84 moving some ClientController code into gli-dialog as well.
85 this is only the beginning :)
86
87 #------------------------------------------
88 # GLI SWITCHES TO SVN.
89
90 15 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
91 src/GLIArchitectureTemplate.py:
92 use _wait_for_device_node() any place we were looping and checking before
93
94 13 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIArchitectureTemplate.py:
96 add _wait_for_device_node()
97 src/GLIPortage.py:
98 raise an exception in get_deps() if pkglist is empty
99 -k option to install livecd-kernel to shut up wolf31o2 :P
100
101 11 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
102 src/GLIArchitectureTemplate.py:
103 break after installing 1 mta in install_mta()
104
105 10 Sep 2006; Preston Cody <codeman@gentoo.org>
106 src/GLIGenDialog.py:
107 rewrote how the USE flags work so that they are written correctly in relation
108 to the system's USE flags.
109 added a while condition on setting a user password
110 src/GLIArchitectureTemplate.py:
111 adding a self._mounted_devices to keep track of mounted partitions.
112 When cleaning up, only unmount these partitions. Not yet tested.
113
114 10 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
115 src/GLIStorageDevice.py:
116 properly identify apple_bootstrap partitions
117
118 9 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
119 src/GLIStorageDevice.py:
120 pay attention to 'ignoredparts' when reading partition table
121
122 3 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
123 src/GLIArchitectureTemplate.py:
124 force conversion of 'mb' to long
125
126 2 Sep 2006; Preston Cody <codeman@gentoo.org>
127 Lots of internationalization fixes. Point to a translation path called
128 languages in the dialog directory. Generated and added .pot files.
129 Added gettext to GLIIP for package descriptions.
130
131 01 Sep 2006; Chris Gianelloni <wolf31o2@gentoo.org>
132 src/GLIInstallProfile.py:
133 Added some more applications to the Extra Packages list.
134
135 1 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
136 src/templates/ppcArchitectureTemplate.py:
137 this doesn't need to inherit from x86AT or create an infinite loop by calling
138 its own __init__()
139 src/GLIArchitectureTemplate.py,src/templates/x86ArchitectureTemplate.py:
140 move partitioning code to GLIAT
141
142 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
143 src/GLIArchitectureTemplate.py:
144 pass quotes_around_value=False when adding default route to conf.d/net
145
146 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
147 src/GLIArchitectureTemplate.py:
148 copy backup custom.conf from livecd if present
149
150 *GLI-0.4 (31 Jul 2006)
151
152 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
153 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
154 doing the testing and coming up with the patch.
155
156 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
157 src/GLIArchitectureTemplate.py:
158 skip blank entries/files in update_config_files()
159
160 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
161 src/templates/x86ArchitectureTemplate.py:
162 move logical clipping logic a bit
163
164 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
165 I've commented out most of the code that used launch. It wasn't working and
166 we don't have the time to fix it before the release. I'll look into it after
167 the release and make it more robust and flexible.
168
169 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/templates/x86ArchitectureTemplate.py:
171 clip logical partition at end of extended
172
173 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
174 src/GLIInstallProfile.py:
175 Added a few more applications to the list of extra packages to be merged,
176 all from various GRP sets.
177
178 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
179 Added launch variable to the end of each try-run with auth, which should
180 cause this to function properly. Of course, more testing is needed.
181
182 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
183 Fix a missed space in the installer script.
184
185 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
186 src/GLIClientConfiguration.py:
187 adding 'None' with capital N so that the frontends can parse the network type
188
189 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
190 src/GLIClientController.py:
191 log version-stamp
192
193 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
194 Updated the installer script to allow specifying the front-end to run from
195 the command line. Currently, it only supports dialog and gtk. It still needs
196 some testing, however.
197
198 9 July 2006; Preston Cody <codeman@gentoo.org>
199 src/GLIGenDialog.py:
200 make lilo only show up for x86 if non-networkless
201
202 25 Jun 2006; Preston Cody <codeman@gentoo.org>
203 src/GLIGenDialog.py:
204 adding code to auto-add doscsi if a scsi drive detected.
205 this code is also in the gtkfe already
206
207 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
208 src/GLIPortage.py:
209 pass proper PORTAGE_TMPDIR
210
211 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
212 src/GLIUtility.py:
213 fix list_mirrors() to ignore <uri> lines that don't end on the same line
214
215 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
216 Added code to the mta step in AT to parse the install packages list and
217 look for mtas and if it finds it emerge it.
218 Initial attempt at moving extra_packages early in the setup to only show
219 local USE flags relating to those packages.
220 .. abandoned local USE project. no right way to do it.
221
222 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
223 src/GLIUtility.py:
224 minor tweak to regex for parsing mirrors.xml
225
226 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
227 src/templates/x86ArchitectureTemplate.py:
228 make use of strict_start and strict_end in partition recreation
229
230 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
231 src/templates/x86ArchitectureTemplate.py:
232 add strict_start and strict_end parameters to _add_partition()
233 add _find_current_minor_for_part() function to help with resizing
234 fix logical/extended logic in _partition_delete_step()
235 in _partition_resize_step(), delete, recreate at new size, resize, delete
236 call resize2fs with no size argument so it fills entire partition
237 more logging
238 only delete, recreate, resize, delete if growing
239 pass new size to resize2fs in K
240
241 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
242 src/GLIStorageDevice.py:
243 call reorder_minors() from tidy_partitions() instead of
244 set_partitions_from_disk()
245 add code to reorder_minors() to take extended/logical into consideration with
246 non-free partitions
247
248 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
249 added a check of the length of the directory in /usr/src if under 6 characters
250 should fix bug 131809
251
252 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
253 src/GLIArchitectureTemplate.py:
254 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
255 and livecd-kernel
256
257 16 Apr 2006; Preston Cody <codeman@gentoo.org>
258 src/GLIGenDialog.py:
259 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
260
261 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
262 src/GLIInstallProfile.py:
263 change kernel-modules to not be so stupid
264
265 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
266 GLIMD: fix display problem with execute.pyhtml.
267 make tables better.
268
269 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
270 src/GLIInstallProfile.py:
271 fix handling of int/float for minor
272 src/templates/x86ArchitectureTemplate.py:
273 save/restore partition name
274 src/GLIStorageDevice.py:
275 support for partition name
276
277 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
278 touchups to add_profile in GLIMD to link to webgli
279 add a save to GLIMD profile button in webgli's saveprofile
280 gliserv.py:
281 initial attempt at custom networking info per client. hostname support only.
282
283 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
284 src/net/server/html/webgli/partitioning[234].pyhtml:
285 small fixes for new partioning code
286
287 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
288 src/GLIClientController.py:
289 record PID of secondary thread
290
291 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
292 src/GLIGenDialog.py:
293 small fix for new partitioning code
294
295 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
296 src/GLIStorageDevice.py:
297 add get_devnode()
298 fix up detect_devices() to detect cciss/ida arrays
299 src/templates/x86ArchitectureTemplate.py:
300 use get_devnode() instead of figuring out the devnode
301 skip first 3 steps if partition layout hasn't changed
302 wipe disk and create new disklabel before recreating partitions
303 src/GLIArchitectureTemplate.py:
304 use get_devnode() in local mount and fstab stuff
305
306 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
307 src/GLIStorageDevice.py:
308 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
309
310 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
311 src/templates/x86ArchitectureTemplate.py:
312 continue breakup/cleanup of partitioning code
313
314 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
315 src/GLIStorageDevice.py:
316 set disklabel to default for arch when clearing the partition table
317 src/templates/x86ArchitectureTemplate.py:
318 complete rewrite of first and second passes
319
320 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
321 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
322 allow iterating over Device object to get partitions
323
324 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
325 src/GLIStorageDevice.py:
326 allow access to Device object like a dict
327
328 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
329 src/GLIStorageDevice.py:
330 allow access to Partition object like a dict
331
332 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
333 src/templates/x86ArchitectureTemplate.py:
334 fail if any filesystems are mounted on the device being partitioned
335
336 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
337 src/GLIStorageDevice.py:
338 reorder minor numbers when loading partitions from disk to match the physical
339 partition order
340
341 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
342 src/GLIStorageDevice.py:
343 overhaul for supporting mac disklabels and partitions out of disk order
344 remove free space from inside extended partition when extended is removed
345
346 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
347 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
348 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
349 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
350 Added bash scripts, icons, and desktop entries from the ebuild to make my
351 life easier.
352
353 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
354 src/GLIStorageDevice.py:
355 raise an exception if the existing partitions are out of disk order
356 look for minors out of order instead of disk position
357
358 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
359 src/fe/dialog/gli-dialog and src/GLIGenDialog:
360 added networkless mode to gli-dialog.
361
362 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
363 src/templates/x86AT:
364 add windows detection code for grub. untested.
365
366 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
367 src/templates/x86ArchitectureTemplate.py:
368 bootloader and partitioning external commands log to compile_output.log
369 wait for device node to exist before resizing
370 add -v to ntfsresize command
371 src/GLIStorageDevice.py:
372 return start/end with ip structure
373 pad min ntfs size by 50 MB just to be safe
374 src/GLIArchitectureTemplate.py:
375 only install filesystem tools for partitions with a mountpoint
376
377 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
378 add error catching and text to saving profile dialogs
379
380 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
381 src/GLIPortage.py:
382 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
383 src/templates/x86ArchitectureTemplate.py:
384 fix checks for changed partitions so they will actually get deleted
385
386 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
387 src/GLIClientController.py:
388 slightly better error handling for pre-install failures
389
390 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
391 src/templates/x86ArchitectureTemplate.py:
392 proper return code checking for ext2/3 resizing
393
394 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
395 src/GLIClientController.py:
396 accept 'none' as well as 'null' for network type
397 src/GLIArchitectureTemplate.py:
398 ignore extended partitions in mount_local_partitions()
399 src/templates/x86ArchitectureTemplate.py:
400 use get_ordered_partition_list() instead of keys().sort() for new_part_list
401 check to make sure start sector for primary isn't less than end sector for
402 previous extended
403 src/GLIClientController.py:
404 write dns servers to /etc/resolv.conf
405
406 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
407 src/GLIPortage.py:
408 copy_pkg_to_chroot() uses compile_output.log for command output
409
410 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
411 only keep a 1000 line 'scrollback' buffer for the compile output and log file
412
413 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
414 src/GLIPortage.py:
415 add code make GLIPortage.py capable of being run stand-along for dynamic
416 stage3 generation and copying packages in a GRP-ish way
417 grp code fixups
418
419 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
420 src/GLIPortage.py:
421 ignore blank packages passed to get_deps() and emerge()
422
423 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
424 src/GLIUtility.py:
425 add get_chosts() function
426
427 *GLI-0.3 (12 Feb 2006)
428
429 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
430 src/templates/x86ArchitectureTemplate.py:
431 pull old start/end sector values from somewhere that actually has them
432 add logic for extended partition to code that makes sure new end sector
433 doesn't overlap start sector of next partitions
434 don't freak out if partition can't be deleted
435
436 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
437 src/GLIPortage.py:
438 run env-update at the end of copy_pkg_to_chroot()
439
440 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
441 src/templates/x86ArchitectureTemplate.py:
442 I'm a complete fscking dumbass. I recorded the end sector for partitions that
443 weren't being touched, but I never used it when recreating them...the end was
444 calculated from the size in MB instead :/
445
446 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
447 src/GLIArchitectureTemplate.py:
448 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
449 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
450 src/GLIPortage.py:
451 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
452 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
453 'resized' flag
454
455 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
456 src/GLIPortage.py:
457 short circuit and check vdb directly if package begins with '='
458
459 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
460 added more packages to extra_packages list in IP
461
462 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
463 src/templates/x86ArchitectureTemplate.py:
464 10 tries to create filesystem instead of 3
465 src/GLIPortage, src/GLIArchitectureTemplate.py:
466 ignore_missing flag for copy_pkg_to_chroot()
467
468 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
469 src/GLIPortage.py:
470 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
471
472 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
473 src/net/server/gliserv.py:
474 fix handling of 404 for real files
475 src/net/server/GLIServerProfile.py:
476 look for 'hostname' in attributes instead of 'name'
477
478 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
479 src/SimpleXMLParser.py:
480 initial support for 'include' in XML files
481 src/GLIStorageDevice.py:
482 initial support for %
483 src/GLIClientController.py:
484 add debugging statements to pre-install steps
485
486 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
487 webgli/configfiles:
488 check for key in etc_files['rc.conf'] to fix key error
489 webgli/timezone: small fix.
490 webgli/extrapackages: list-type fix
491 webgli/services: same
492 glimd: add/edit_client updates.
493
494 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
495 added configure.pyhtml to glimd. minor changes
496 to top and add_client. fixed up showargs.
497 added execute.pyhtml
498 changed register clients line in gliserv for name->hostname.
499 updated TODO.
500
501 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
502 src/net/server/*:
503 added add/del/edit client/profile.pythml for glimd.
504 updated templates, showclients, and gliserv.
505
506 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
507 src/net/server/*:
508 stupid threading module...
509
510 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
511 AT: rc.conf -> conf.d/clock
512
513 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
514 src/GLIPortage.py:
515 show 'Calculating dependencies for ...' in subprogress bar at beginning of
516 emerge()
517 src/GLIArchitectureTemplate.py:
518 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
519 in the chroot
520 remove _quickpkg_deps() and _portage_best_{visible,version}()
521 src/GLIUtility.py:
522 fail immediately in validate_uri() if provided URI can't be parsed
523 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
524 debug code in spawn()
525 use lower-level os.read() instead of file.read() because python sucks
526 src/templates/x86ArchitectureTemplate.py:
527 basic subprogress reporting for partitioning
528 total_steps was 1 too high
529
530 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
531 src/GLIUtility.py:
532 move parse_vdb_contents() to GLIPortage
533 src/GLIPortage.py:
534 remove all symlink fixups
535 ignore 'dir' entries in CONTENTS
536 call tar with -p
537
538 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
539 AT: bootsplash is now gensplash
540 gliserv: add advanced_mode to shared_info
541 webgli: Added advanced mode. mostly just disables a few screens.
542
543 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
544 src/GLIPortage.py:
545 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
546 added emerge()
547 update sub-progress after each package is emerged
548 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
549 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
550 remove link if it exists before moving content into place
551 src/GLIArchitectureTemplate.py:
552 install_packages() now calls emerge() in GLIPortage
553 change all calls to self._emerge() to self._portage.emerge()
554 comment out all emerge status checking...using exceptions now
555 call copy_pkg_to_chroot() directly for livecd-kernel
556
557 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
558 src/GLIArchitectureTemplate.py:
559 remove add_pkg_to_world() and copy_pkg_to_chroot()
560 copy installer.log to installer.log.failed on install failure
561 src/GLIUtility.py:
562 added get_keymaps()
563 spawn() takes any False argument for chroot instead of just None
564 src/GLIPortage.py:
565 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
566 change copy_pkg_to_chroot() to work properly with use_root=False
567 figure PORTAGE_TMPDIR properly
568
569 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
570 src/net/server/html/*:
571 converted showclients, load/saveprofile
572
573 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
574 src/GLIPortage.py:
575 exclude packages already in chroot vdb from binary deplist
576 chroot to use best_version for chroot's vdb
577 src/runtimedeps.py:
578 accept ROOT via commandline instead of env
579
580 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
581 src/runtimedeps.py:
582 remove passing of ROOT
583 src/GLIPortage.py:
584 modify get_deps() to get deptree for each package and merge into final list
585 remove depgraph class
586 add debugging code to get_deps()
587 src/GLIArchitectureTemplate.py:
588 combine code for GRP/compile in install_packages() into one block
589 debugging code in install_packages()
590
591 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
592 src/runtimedeps.py:
593 initial commit
594 src/GLIPortage.py:
595 use separate script for GRP deps
596 remove calls to portage module
597
598 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
599 src/GLIPortage.py:
600 initial commit
601 move some of portage function from GLIAT
602 flipped around a few function args
603 src/GLIArchitectureTemplate.py:
604 revamp install_packages() for new GLIPortage
605
606 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
607 src/GLIArchitectureTemplate.py:
608 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
609
610 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
611 src/net/server/gliserv.py:
612 wrap generated code in a class to isolate it a bit better
613 302 redirects work
614 don't use cgi.escape() for <% %>
615 src/net/server/html/webgli/*:
616 load/save profile
617 src/GLIUtility.py:
618 change /sbin/lspci to just lspci
619
620 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
621 src/GLIClientController.py:
622 change ordering of statements in CC run() while loop to not go past the end
623 of the array
624 src/GLIArchitectureTemplate.py:
625 removed redundant bind mounts
626
627 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
628 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
629 added a diagram by blackace from last night.
630 added the glossary in RTF format.
631
632 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
633 x86AT: separated out emerge/configure from running of bootloader
634 added MBR drive support to lilo.
635 these changes will likely not work.
636 AT: added setup_and_run_bootloader step.
637
638 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
639 src/net/server/gliserv.py:
640 call generated code in a function
641 src/net/server/html/webgli/*:
642 include top/bottom
643 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
644 src/GLIClientCongifuration.py:
645 install mode magic
646
647 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
648 src/GLIClientController.py:
649 use GLIException when there's an import problem
650 added debug code to show install_steps
651 src/templates/amd64ArchitectureTemplate.py:
652 add . to import path
653 proper path this time: ../../templates
654 src/GLIArchitectureTemplate.py:
655 add _portage_best_version() function
656
657 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
658 added initial glossary and gimli diagram to the docs directory.
659 modify gli-dialog to allow editing of the install_profile after loading XML.
660
661 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
662 src/net/server/html/webgli/:
663 converted globaluse, localuse, networkmounts, portagetree, and stageselection
664 moved saveclientconfig stuff into clientconfig
665 moved saveconfigfiles into config files
666 converted etc_portage and makedotconf
667 converted bootloader and kernel
668 convert daemons, extrapackages, networking, review, services, timezone, users
669 src/net/server/gliserv.py:
670 proper 404 handling for .pyhtml extension
671 HTML escape <% %> stuff
672 work around python's sucky regexes
673 src/GLIInstallProfile.py:
674 allow set_{rsync,ftp,http}_proxy() to accept empty values
675
676 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
677 src/net/server/gliserv.py:
678 initial commit of Legolas templating engine
679 302 redirects
680 src/net/server/html/index.html, src/net/server/webgli_template.html:
681 minor changes for new code
682 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
683 initial commit of the conversion from the monolithic WebGLIHandler.py to the
684 one file per path Legolas goodness
685 partitioning[2-4] done
686
687 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
688 webgli: dhcp options in CC and post-install.
689 updated comparison chart.
690 webgli: etc/portage/* and distcc support added. not too-well tested.
691
692 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
693 webgli_template.html: valign=top on left side.
694 webgli: fix bootloader boot_device. now working.
695 webgli: CC proxy done. post-install proxy in progress.
696
697 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
698 src/net/server/webgli_template.html:
699 increase padding for content cell to 7px and add colspan=2
700
701 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
702 webgli: added graphic bar on top
703 webgli: added hover effects on the links on the left
704 webgli: re-rendered header_bg.png to stretch without artifacts
705
706 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
707 webgli: make.conf disabling fixes for dynamic_stage3
708 fixed portage snapshot browse popup
709 all changes tested.
710 webgli: add debug mode to CC screen. the screen still needs lots of work.
711
712 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
713 added debug mode question to gli-dialog
714 added CC proxies to CC networking for gli-dialog
715 webgli: fixed skip CC networking if connection active
716 webgli: portage snapshot defaults to CD
717 webgli: bootloader mbr drive selection
718 webgli: USE flags unselectable if dynamic_stage3
719 webgli: manual extra packages and save button.
720
721 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
722 src/GLIUtility.py:
723 change ping count to 2
724 docs/comparison.html
725 initial commit
726
727 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
728 src/templates/x86ArchitectureTemplate.py:
729 fix map() issue with grub code
730 replace kernel_names and initrd_names loops with one-liners
731
732 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
733 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
734 initial gli-dialog support for recommended partitioning layout and clear.
735 failure cleanup now an option for gli-dialog.
736 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
737 added comparison list and updated TODO!
738
739 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
740 src/GLIArchitectureTemplate.py:
741 fix to stage1() debug code
742 fix to stage2() debug code
743
744 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
745 some more bootloader code fixes. forgot boot_device != mbr_device.
746
747 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
748 src/GLIStorageDevice.py:
749 fix to unallocated space merging when last one is after part 4
750
751 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
752 src/GLIArchitectureTemplate.py:
753 small fix to debugging code in copy_pkg_to_chroot()
754
755 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
756 more bugfixes with bootloader code
757 gli-dialog side appears to work
758
759 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
760 initial adding of boot_device to backend.
761 initial boot_device support added to gli-dialog.
762 some fixes of my poor coding
763
764 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
765 converted gli-dialog to use the install_package_list.
766 gtkfe has already been converted by AllanonJL
767 new way working in gli-dialog now and added to webgli.
768 added set/get_boot_device() to IP
769
770 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
771 get_install_package_list added to InstallProfile. This can be used by the FEs
772
773 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
774 src/templates/x86ArchitectureTemplate.py:
775 call ls with '-1 --color=no'
776
777 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
778 added warning (#9) to GRP ppl about stage3 tarballs
779
780 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
781 src/GLIArchitectureTemplate.py:
782 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
783 confused
784
785 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
786 removed protocols from rc.conf screens
787 finished initial rc.conf and make.conf in webgli
788
789 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
790 src/net/server/gliserv.py:
791 add -h option to usage()
792 show time and request URI in debug mode
793 show client IP in debug mode
794 just use IP instead of trying to do a reverse lookup
795
796 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
797 src/net/server/gliserv.py:
798 'classier' 401 message
799 proper commandline parsing
800 help via -h
801 user/pass can be specificed via commandline option
802
803 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
804 src/net/server/gliserv.py:
805 basic HTTP auth
806
807 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
808 src/net/server/gliserv.py:
809 dynamic module reloading (yipee!)
810 send 'Last-Modified' header for real files
811 respond to HEAD with just headers
812 src/net/server/handlers/WebGLIHandler.py:
813 icons for drives
814
815 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
816 src/net/server/handlers/WebGLIHandler.py:
817 initial 'pretty' partition table display support
818 clicking partition in 'pretty' display works instead of radio buttons
819 radio buttons and pretty display work together
820 META redirect instead of javascript
821 pretty display stretches across entire screen
822 'Recommended layout' and 'Clear drive' functions
823 properly catch exceptions from do_recommended()
824 src/GLIArchitectureTemplate.py:
825 replace preinst, copy, postinst, rm steps with qmerge
826 whoops...that shouldn't have been commented out
827 create image_dir with -p in copy_pkg_to_chroot()
828 more generic of symlink crappiness
829 new copy_pkg_to_chroot() actually works now
830
831 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
832 src/GLIStorageDevice.py:
833 initial generic disk support
834 fixes for add_partition() code
835 src/net/server/handlers/WebGLIHandler.py:
836 added support for creating generic disks
837 add new partition working
838 save and delete partitions
839
840 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
841 webgli: Partitioning making progress.
842
843 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
844 src/GLIArchitectureTemplate.py:
845 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
846 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
847 dir) and works around /etc/gconf symlink problem
848
849 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
850 webgli: lots of updates. preliminary partitioning. extra packages works.
851
852 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
853 src/net/server/gliserv.py:
854 httpd now supports HTTPS and falls back to HTTP if not available
855 make fallback actually work
856 src/net/server/SecureXMLRPCServer.py:
857 SecureSocketServer is now threaded
858
859 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
860 src/net/client/gliclient.py:
861 try to use HTTPS for XMLRPC first and fallback to HTTP
862 pretend mode
863 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
864 HTTPS XMLRPC goodness from samyron
865 pass name of certificate
866
867 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
868 wegli: daemons and services screens done.
869
870 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
871 webgli: networking and users screens
872 added return_redirect to handler.py
873 loading and saving install/client profiles works for webgli now
874 Review also done
875
876 *GLI-0.2 (27 Oct 2005)
877
878 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
879 src/templates/x86ArchitectureTemplate.py:
880 properly check for bootloader emerge exist status with exitsuccess()
881 log output of grub install command
882 add --batch --no-floppy to grub command
883 grubinstallstring only gets logged if debug is on
884 src/GLIUtility.py:
885 update progress bar to 100% when process finishes
886
887 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
888 src/GLIClientController.py:
889 added debugging code for the interaction between the 2 threads via Event()
890 src/GLIUtility.py:
891 doubled the buffer size in spawn()
892 bump buffer size up to 16384
893 only report progress in 5% increments
894 src/GLIArchitectureTemplate.py:
895 kernelpkgs.txt support code
896 above disabled because it sucks
897 added add_pkg_to_world()
898
899 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
900 src/GLIArchitectureTemplate.py:
901 use tar | tar to copy files in copy_pkg_to_chroot()
902 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
903
904 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
905 DEBUGGING ADDED TO AT. verbose field added to CConfig.
906
907 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
908 src/net/server/gliserv.py:
909 / maps to index.html
910 look for actual files in html/
911 src/net/html:
912 new template
913 src/GLIUtility.py:
914 added parse_vdb_contents()
915 src/GLIArchitectureTemplate.py:
916 added copy_pkg_to_chroot()
917 added debug code to dynamic-stage3
918 switch dynamic-stage3 to new method
919 lots of bug fixes from adding debug code
920
921 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
922 webgli initial bootloader support + changed make.conf.
923 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
924
925 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
926 src/GLIUtility.py:
927 horrible tangled mess of code that is tarball unpacking subprogress display
928 add unpack progress to portage snapshot
929 use read() instead of readlines() in spawn()
930 only update progress bar for whole percents
931
932 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
933 src/templates/x86ArchitectureTemplate.py:
934 change call to 'grub' to use GLIUtility.exitsuccess()
935 add definition of 'build_mode' in _configure_lilo()
936 src/misc/updategtkfe, src/misc/updateglid:
937 fix so subshell is called in root shell
938
939 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
940 src/net/server/handlers/WebGLIHandler.py:
941 stage screen launches URI browser in sized window with various properties set
942
943 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
944 src/misc/updategtkfe:
945 updated to actually work
946 remove previous snapshot and extracted dir before downloading
947 src/misc/updateglid:
948 updated to actually work
949 src/templates/x86ArchitectureTemplate.py:
950 fixed bug where grub code was looking for 'root+root+file_name2'
951
952 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
953 src/net/server/handlers/WebGLIHandler.py:
954 URI browser
955 added mirror selection
956 src/GLIUtility.py:
957 ls via ssh strips off ending *
958
959 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
960 more updates to webgli. stage selection.
961
962 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
963 updated webgli with preliminary Network Mounts support.
964
965 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
966 GenDialog: string formatting and yes/no label fixes.
967 added WebGLI template for gliserv.py
968 added WebGLIHandler as well as a definition for it in gliserv.py
969 updates to the webgli files even though they won't be there for long.
970 Utility: remove exception for non-existant grppkgs.txt until the new livecd
971 goes public.
972
973 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
974 src/net/server/gliserv.py:
975 override dict to not be so anal
976 main server now loads separate module to handle requests
977 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
978 split out profile URLs into separate handler function
979 move handlers into subdirectory
980 add Welcome and Clients handlers
981
982 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
983 src/GLIUtility.py:
984 raise exception if password prompt received twice
985
986 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
987 src/GLIUtility.py:
988 removed rot13ify()
989
990 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
991 src/net/server/gliserv.py:
992 allow for param to be passed multiple times in GET
993 no XMLRPC functions return None
994 modify POST request parsing to only create a list if needed
995 fix GET request parsing so the list creation for multiple values works
996 src/net/client/gliclient.py:
997 various typo and type mismatch fixes
998 exit after exception
999
1000 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1001 src/net/client/gliclient.py:
1002 initial commit
1003 pass MAC to XMLRPC functions
1004 src/net/server/GLIServerProfile.py:
1005 rename GLIClientsProfiles to GLIServerProfile
1006
1007 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1008 src/net/server/gliserv.py:
1009 now handles POST requests
1010 move majority of request handling code to common_handler() to reduce code
1011 duplication
1012 profile loading
1013 client reg via XMLRPC goes into SharedInfo()
1014 /showclients redesign
1015 template fixes
1016 allow handler functions to add/change headers
1017 save profile
1018
1019 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1020 src/net/server/GLIClientsProfiles.py:
1021 initial commit
1022 src/net/server/template.html:
1023 initial commit
1024 src/net/server/gliserv.py:
1025 add template mojo
1026
1027 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1028 src/net/server/gliserv.py:
1029 XMLRPC mojo
1030
1031 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1032 src/GLIArchitectureTemplate.py:
1033 add code in _edit_config() to comment line where variable is defined
1034 previously
1035 insert new line under previous definition of variable if it exists
1036 small _edit_config() cleanup
1037 src/GLIStorageDevice.py:
1038 add clear_partitions() function
1039 new sizes for recommended partition layout
1040 automatically calculate swap size for recommended layout
1041
1042 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1043 src/templates/x86ArchitectureTemplate.py:
1044 fat16 mojo
1045
1046 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1047 src/GLIStorageDevice.py:
1048 prevent do_recommended() from being run twice
1049 rewrite do_recommended() to be more robust
1050 src/GLIArchitectureTemplate.py:
1051 rework _edit_config() to not write duplicate entries
1052
1053 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1054 src/GLIStorageDevice.py:
1055 added do_recommended() function to automatically created 256M/1G/* layout
1056
1057 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
1058 src/gli-dialog.py: added set_distcc to the list
1059 GenDialog: added set_distcc. untested.
1060 IP: added install_distcc flag.
1061 AT: added install_distcc function based on the flag. runs after build_kernel
1062 changed AT spawn command for distcc for nodeps.
1063
1064 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1065 src/GLIUtility.py:
1066 add rot13ify() function
1067
1068 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
1069 src/GenDialog.py:
1070 added a sentence of text. unchecking support added.
1071
1072 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
1073 src/GLIUtility.py:
1074 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
1075 src/GenDialog.py:
1076 still working on extra_packages. transformed the list to new format.
1077 added GRP indication to list. untested.
1078 TODO lists updated.
1079 src/fe/dialog/gli-dialog.py:
1080 spelling mistook.
1081
1082 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1083 src/GLIUtility.py:
1084 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
1085
1086 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1087 src/GLIUtility.py:
1088 add get_directory_listing_from_uri()
1089 add http support to above
1090 add ftp support to above
1091 add scp support to above
1092 src/GLIArchitectureTemplate.py:
1093 "0" instead of 0 for key of single-element dict passed to _edit_config()
1094
1095 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
1096 value_only -> only_value
1097
1098 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
1099 gutted out all of etc_portage structure since it is now all handled by
1100 etc_files
1101
1102 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1103 src/GLIArchitectureTemplate.py:
1104 install_packages() sends progress update notifications
1105 src/templates/x86ArchitectureTemplate.py:
1106 increase sleep to 5s between format tries
1107 src/GLIClientController.py:
1108 pass 'self' to AT instead of 'self._pretend'
1109
1110 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
1111 logger -> logger.log in x86AT
1112
1113 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
1114 added set_etc_portage to IP. debugging gli-d's support for it.
1115
1116 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1117 src/templates/x86ArchitectureTemplate.py:
1118 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
1119
1120 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1121 src/GLIArchitectureTemplate.py:
1122 add _portage_best_version() function and rework install_packages() to allow
1123 for future X of Y tracking
1124 Use best_visible instead of best_version
1125 tracked down and fixed missing = causing empty install extra packages
1126 use = when emerging also
1127 quickpkg hokey pokey
1128 run _get_packages_to_emerge() again with -pk
1129
1130 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
1131 src/ArchTemplate:
1132 removed install_xorg_x11, and put the xorg.conf copying at
1133 the end of install_packages.
1134 added updateglid to /src/misc
1135 updated all core files with new GPL notice and copyright statement.
1136
1137 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1138 src/GLIUtility.py:
1139 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
1140 a snapshot in /mnt/cdrom/snapshots/
1141 get_snapshot_from_cd() adds file:// at the beginning
1142 change calls to extra package special case functions to 'self.blah'
1143
1144 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
1145 src/ArchTemplate: changed "voodoo".
1146 changed order of portage sync methods. made a fallback to webrsync if
1147 normal emerge sync fails.
1148 removed get_sources_from_cd because it is obsolete.
1149 add special cases to install_packages. remove fatal exception on package
1150 install failure b/c the box will still be bootable.
1151 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1152 handled in the FEs.
1153 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1154 awaiting testing.
1155
1156 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1157 src/GLIStorageDevice.py:
1158 global try/except block around fs resizable detection code
1159 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1160 install-failed cleanup function
1161
1162 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1163 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1164
1165 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1166 GLIGenDialog:
1167 add drive choices for loaded configs.
1168 force snapshot for dynamic_stage3
1169 init the snapshoturi input to the cd snapshot if not already selected.
1170 if dynamic_stage3, skip the make.conf step.
1171 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1172 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1173
1174 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1175 src/GLIArchitectureTemplate.py:
1176 manually call MAKEDEV in stage3-dynamic code
1177 copy /etc/inittab.old to /etc/inittab in chroot
1178 src/GLIUtility.py:
1179 add beginning of validate_uri() function
1180 add file:/// support to validate_uri()
1181 single quotes when setting livecd password
1182
1183 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1184 src/GLIGenDialog.py:
1185 change getmountpoint() to get_mountpoint()
1186 src/misc/updategtkfe:
1187 committed script to automatically download latest snapshot and run gtkfe
1188 src/templates/x86ArchitectureTemplate.py:
1189 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1190 src/GLIArchitectureTemplate.py:
1191 give tmp_minor an initial value in mount_local_partitions so that the value
1192 remain from the previous drive
1193
1194 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1195 src/templates/x86ArchitectureTemplate.py:
1196 Fix _configure_lilo() for IP using GLISD stuff
1197 src/GLIArchitectureTemplate.py:
1198 install_cron_daemon() treats "none" specially
1199
1200 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1201 old patch from Steven Mertens to resolve bug #96642
1202 numerous asthetic changes to GenDialog, no real functionality changes though.
1203 strings renamed for global use if necessary.
1204 fix all three parts of bug 102291
1205 disable set_etc_portage until fully-written.
1206
1207 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1208 src/GLIClientController.py:
1209 lower-case http/ftp proxy envvars
1210
1211 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1212 src/GLIClientController.py:
1213 log end of pre_install steps to aid in debugging
1214 src/templates/x86ArchitectureTemplate.py:
1215 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1216
1217 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1218 src/GLIArchitectureTemplate.py:
1219 check to make sure that the device node we're wait for to exist isn't of
1220 type 'free'
1221
1222 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1223 src/GLIGenDialog.py:
1224 convert install_packages to list in set_extra_packages()
1225 check return code of checklist() call in "Manual" section
1226 *actually* fix the first problem
1227
1228 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1229 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1230 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1231
1232 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1233 src/GLIArchitectureTemplate.py:
1234 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1235
1236 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1237 Add CDATA support to SimpleXMLParser and add utility functions for it.
1238
1239 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1240 src/GLIArchitectureTemplate.py:
1241 Fix case where vixie-cron is specified as a full package atom, as we still
1242 don't want to run 'crontab /etc/crontab' for it.
1243
1244 *GLI-0.1 (3 Aug 2005)
1245
1246 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1247 add scp to list of is_uri() so GenDialog doesn't complain.
1248 fixed livecd-kernel bug in bootloader code.
1249 fixed gendialog for dynamic_stage3 instead of "networkless"
1250 change bootloader to allow for both initrd and initramfs.
1251 fix IP for dynamic_stage3.
1252 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1253
1254 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1255 Added full scp:// URI support to get_uri() in GLIUtility
1256 Remove "networkless" from dynamic stage3 if locic.
1257 Remove print statement from scp:// code.
1258 Change scp code to check for "assword: " instead of "Password:"
1259 Fix post-install network code to create net.eth1+ symlink correctly
1260 Check to make sure pkg can be split on / and some debugging code
1261 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1262 SimpleXMLParser handles True/False/None correctly now
1263 Comment out above fix
1264 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1265
1266 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1267 Removed a FIXME in the GLIClientConfiguration that is no
1268 longer needed.
1269
1270 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1271 Default to x86 in ClientConfig
1272 Typo in build-a-stage3 code.
1273 Remove MAKEDEV call in build-a-stage3 postscript.
1274
1275 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1276 Rewrote init of IP for gli-d. Other GenDialog updates.
1277 allow network_type to be None in CConfig.
1278
1279 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1280 Add _dynamic_stage3 option to IP.
1281 Add check for that option to dynamic stage3 code in ArchTemplate.
1282 Fix code to determine default route in get_eth_info() in GLIUtility.
1283 Fix serialization of dns-servers in ClientConfig.
1284
1285 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1286 changed default values of cron/logger in IP.
1287 moved GenDialog IP init out to the individual files. gli-dialog's version
1288 will change quite a bit.
1289
1290 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1291 added ppcArchTemplate. blank now. working on yaboot.
1292 modified ArchTemplate for amd64 and ppc custom kernels.
1293 skeleton implementation of _configure_yaboot.
1294 small fixes to other templates.
1295
1296 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1297 GenDialog updates. changed comment in IP.
1298
1299 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1300 src/GLIInstallProfile.py:
1301 Fix codeman's screwup of changing the service seperator to ',' in the parser
1302 without changing it in the serialization code! Also document this in a
1303 comment so you find it easier. Everybody needs to make sure they update
1304 their install profiles!
1305
1306 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1307 src/GLIArchitectureTemplate.py:
1308 Fix casting of list to string and concat of None with string, as well as
1309 commented prototype of checking that mounting actually worked (found a case
1310 where mount can return success, but the mount won't be done).
1311
1312 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1313 src/templates/x86ArchitectureTemplate.py:
1314 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1315 checking for the device, and sleeping 1 second each time.
1316
1317 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1318 src/templates/x86ArchitectureTemplate.py:
1319 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1320 bootloader works again. Also rename _install_{grub,lilo} to
1321 _configure_{grub,lilo} since they don't install the loaders anymore
1322 themselves.
1323
1324 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1325 fix global USE flags to not include the arch types at the end.
1326 updates to GenDialog and gli-d.
1327
1328 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1329 fixing bootloader code for no initrd and initrd->initramfs naming change.
1330
1331 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1332 Proper comments and parameters to GLIException in install_mta()
1333 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1334 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1335 list_tarball_from_mirror() to eliminate blank last item.
1336
1337 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1338 Added stage3 generation code.
1339
1340 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1341 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1342 Mild changes to GenDialog.
1343
1344 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1345 Remove separate install step configure_rc_conf() since it's handled by
1346 update_config_files()
1347 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1348 function is called twice on the same file.
1349
1350 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1351 Missing \ in sed in _get_packages_to_emerge()
1352 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1353 Check in _quickpkg_deps() to ignore blank package names returned from
1354 _get_packages_to_emerge()
1355
1356 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1357 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1358 in the dialog.py gauge code.
1359
1360 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1361 Add code to update_config_files() to go through etc_files and update stuff.
1362 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1363 Only use float() in partition xml parsing code if type == "free"
1364
1365 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1366 finished almost all internationalization of GenDialog.
1367 attempt at fixing rc.conf function. moved 3 generate functions out of
1368 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1369 added dialog.py to the fe/dialog directory so it actually gets used.
1370
1371 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1372 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1373
1374 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1375 fix extra entry in list_mirrors()
1376 beginning internationalization runthrough.
1377
1378 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1379 added dialog.py to /src temporarily until it gets accepted upstream.
1380 fix for unused value in form in dialog.py and changed heights.
1381 fix GenDialog forms.
1382
1383 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1384 Changed hostname/domainname for new baselayout.
1385 Changed _add_to_runlevel errors to logs.
1386 Updated TODO list to show status of GenDialog
1387 More updates to GenDialog including two checklists that probably won't work.
1388 update IP to use comma-separated list instead of space separated for services.
1389
1390 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1391 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1392 GenDialog as it gets closer to completion.
1393
1394 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1395 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1396 instead of int() in add_partition_device_partition() for minor (closes 96804)
1397
1398 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1399 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1400 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1401 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1402
1403 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1404 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1405 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1406 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1407 Fix undefined variable 'output' issue in spawn().
1408
1409 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1410 More updates to GenDialog and gli-d.
1411
1412 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1413 Modify list_mirrors() to return a list of mirror URL/name pairs.
1414
1415 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1416 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1417 get subarch.
1418
1419 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1420 Backend partitioning will create disklabel is none exists. Installprofile
1421 defaults to "" now instead of "msdos" for disklabel type. Fix for
1422 mount_local_partitions() to remember device along with minor in the
1423 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1424 add else block to log unsupported netmount types to mount_network_shares()
1425
1426 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1427 src/GLIArchitectureTemplate.py:
1428 Refactor kernel_compile common stuff, fix 2.4 build process.
1429 src/fe/cli/clife.py:
1430 Logging system.
1431 src/GLIUtility.py, src/GLIStorageDevice.py:
1432 Add comments about re-writes needed for boxes without sysfs.
1433
1434 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1435 src/GLIArchitectureTemplate.py:
1436 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1437 'make dep' call for custom compile. build_mode support for prepare-only and
1438 none types completed. custom compile function chains shell functions in
1439 spawned script, to allow for catching all errors.
1440
1441 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1442 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1443 and GenDialog. other gendialog updates as well. kernel updates untested.
1444
1445 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1446 src/GLIInstallProfile.py:
1447 Change structure of etc-portage stuff. The serialization was broken before my
1448 last commit, and I am the only person that's ever used it. The new schema is
1449 as follows:
1450 <etc-portage>
1451 <file name="package.mask"/>
1452 <file name="package.unmask">
1453 <entry atom="sys-kernel/openmosix-sources"/>
1454 </file>
1455 <file name="package.use">
1456 <entry atom="sys-libs/db">
1457 -java
1458 </entry>
1459 <entry atom="dev-libs/cyrus-sasl">
1460 -ldap
1461 </entry>
1462 </file>
1463 </etc-portage>
1464
1465
1466 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1467 src/GLIInstallProfile.py:
1468 Add new entry for gli-profile/kernel-build-method item. Add missing
1469 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1470 keys in the same order.
1471
1472 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1473 src/GLIArchitectureTemplate.py:
1474 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1475 was repeatedly appended to make.conf.
1476
1477 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1478 src/GLIArchitectureTemplate.py:
1479 Put some Linux-2.6 specific code under a if statement. Store list of
1480 successfully mounted swap device for using swapoff. Add proper error checking
1481 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1482 'file'. Clean up some redundant code (thanks to pychecker).'
1483
1484 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1485 Fix typos: get_extended() instead of get_extended_partition(). Added
1486 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1487 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1488
1489 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1490 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1491 in add_network_interface.
1492
1493 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1494 src/GLIArchitectureTemplate.py:
1495 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1496 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1497 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1498 prepare_chroot.
1499
1500 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1501 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1502 +src/fe/installer-gtk:
1503 Add new automated CLI frontend. Add scripts that are the intended means to
1504 use each frontend.
1505
1506 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1507 src/GLIClientController.py:
1508 Add null type to network config, for cases where the interface is already up
1509 and should not be touched (netboot for example).
1510
1511 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1512 src/GLIArchitectureTemplate.py:
1513 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1514 string!. Try to use binary packages if available by default.
1515
1516 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1517 src/GLIArchitectureTemplate.py:
1518 More error checking for _add_to_runlevel, to ensure that the init script
1519 actually exists before we try to add it. set_services phase must take place
1520 after the package installation, otherwise the init scripts might not exist.
1521 Find the correct init script for the cron and logging daemons, and add that
1522 instead of the package atom.
1523
1524 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1525 src/GLIArchitectureTemplate.py:
1526 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1527 usage of 'file' to 'contents' for the variable name, as it shadows
1528 __builtin__.file.
1529
1530 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1531 src/GLIArchitectureTemplate.py:
1532 Add MTA install code, and include MTA install phase. Ensure
1533 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1534 for 'none' kernel config for build_kernel phase. Put kernel_script in
1535 /var/tmp instead of /root for build_kernel phase.
1536
1537 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1538 Rename mta variables to match syslog/cron variables.
1539
1540 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1541 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1542 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1543 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1544 src/templates/.cvsignore, src/tests/.cvsignore:
1545 Refactor partition formatting again to include error checking. Allow 'none'
1546 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1547
1548 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1549 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1550 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1551 only have a single spawn call.
1552
1553 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1554 refixed samyron's fix of set_architecture_template.
1555
1556 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1557 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1558 be executable.
1559
1560 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1561 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1562 error checking when you call set_architecture_template.
1563
1564 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1565 moved the mkfsopts input to the partition options menu instead of the during
1566 the creation process. updated GenDialog to say it supports reiserfs v3.
1567
1568 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1569 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1570 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1571 Add support for other partition types to dialogfe.
1572 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1573 avoid integer overflows and wraparounds.
1574
1575 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1576 Removed start/end from XML output and added mkfsopts to partitioning info.
1577 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1578 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1579 in GLIClientConfiguration. Change from .1 and .9 to constants for
1580 partitioning. Fix free space overwriting bug. Remove a few unused functions
1581 from rewrite. Fix call to get_partition_at()
1582
1583 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1584 Updates to GenDialog and dialogfe.
1585
1586 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1587 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1588
1589 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1590 more GenDialog updates to partitioning.
1591
1592 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1593 Indenting issue in GLISD/get_ordered_partition_list.
1594 updates to GenDialog partitioning and added default UTC for timezone in IP.
1595
1596 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1597 Added GLISD.get_model()
1598
1599 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1600 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1601 More updates to GenDialog :)
1602
1603 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1604 Added get_interface_realname() function.
1605
1606 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1607 Added auto-save of CConfig and copying to new /root after install.
1608 yet even more GenDialog updates.
1609
1610 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1611 removed print statement from GLISD. more updates to GenDialog.
1612
1613 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1614 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1615 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1616 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1617 places in GLIClientConfiguration.
1618
1619 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1620 Fix mount_local_partitions(), configure_fstab(), and
1621 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1622 A few more fixes for templates/x86Archtemplate
1623
1624 27 May 2005; Preston Cody <codeman@gentoo.org> :
1625 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1626 a work in progress.
1627
1628 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1629 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1630 directly. GLISD can now handle data imported from XML.
1631
1632 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1633 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1634 handle blank (no disklabel) disks.
1635
1636 20 May 2005; Preston Cody <codeman@gentoo.org> :
1637 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1638 up, documented, and separated out serialization and grouped all sections.
1639
1640 19 May 2005; Preston Cody <codeman@gentoo.org> :
1641 Reorganization of ClientConfiguration and gutting of unused functions.
1642 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1643
1644 18 May 2005; Preston Cody <codeman@gentoo.org> :
1645 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1646
1647 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1648 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1649 partitioning. CC serializes install profile to disk and prepare_chroot()
1650 copies it into /mnt/gentoo/root
1651
1652 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1653 Moved URI parsing into new function parse_uri()
1654
1655 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1656 Added XMLParser module.
1657
1658 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1659 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1660 Minor fix to is_uri() regex to allow hyphens in hostname.
1661
1662 12 May 2005; Preston Cody <codeman@gentoo.org> :
1663 Updated finishing_cleanup for new unmounting method from agaffney.
1664
1665 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1666 Fix GLILogger to use correct time format string. Fix _edit_config() to
1667 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1668 unicode support to is_realstring().
1669
1670 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1671 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1672 return value instead of non-zero. Add code to output a traceback to the
1673 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1674 instead of --nocolor.
1675
1676 10 May 2005; Preston Cody <codeman@gentoo.org> :
1677 Added GLIGenDialog.py to make a generic class for the dialog functions that
1678 can be used by both dialogfe and the netfe/be. updated both for new filename.
1679 date changes. 2004->2005.
1680
1681 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1682 Removed 'quiet=True' from spawn() calls
1683
1684 10 May 2005; Preston Cody <codeman@gentoo.org> :
1685 Updated GLIUtility with patches from chotchki. Also added documentation
1686
1687 9 May 2005; Preston Cody <codeman@gentoo.org> :
1688 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1689 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1690 from bug #89683, mostly touchups.
1691
1692 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1693 GLIStorageDevice cleanup patch from bug #91761
1694
1695 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1696 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1697 _edit_config(). Error logging casts 'error' to str
1698
1699 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1700 Exceptions received in CC are logged before being passed to the FE. Added
1701 code to CC to handle exceptions *not* thrown by the installer itself.
1702
1703 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1704 get_max_mb_for_resize() returns -1 if not self.resizeable
1705
1706 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1707 More dirty rsync hacks :-/
1708
1709 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1710 Patches from chotchki (bug #90325) to improve CC networking. untested.
1711
1712 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1713 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1714 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1715 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1716 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1717 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1718 _get_packages_to_emerge()
1719
1720 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1721 Added group-adding code to set_users in ArchTemplate
1722
1723 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1724 Added post-install script code
1725
1726 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1727 Fixed encapsulation issues in GLIClientController (bug #90141)
1728
1729 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1730 Update resizing code in GLIStorageDevice
1731
1732 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1733 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1734
1735 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1736 Reverted change to ArchTemplate and added support for commented line in old
1737 code.
1738
1739 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1740 Changed _edit_config() to modify value in-place instead of commenting out and
1741 adding the new value to the end of the file.
1742
1743 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1744 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1745 Also updated TODO list.
1746
1747 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1748 Use blackace's one-liner to add comments for all function for use with
1749 pythondoc.
1750
1751 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1752 Moved 'end >= device_sectors' check out of loop to check for next partition's
1753 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1754 Partitioning code now tracks start/end of extended for placing logicals. End
1755 point of logical is now adjusted along with start.
1756
1757 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1758 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1759 the way of partitioning from a blank disk. Add int() around access to minor
1760 key in partition information due to new partition code leaving them as float.
1761
1762 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1763 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1764
1765 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1766 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1767
1768 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1769 Added support for DHCP options and MAC addresses in the InstallProfile.
1770
1771 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1772 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1773 sed to properly strip out junk.
1774
1775 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1776 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1777 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1778
1779 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1780 Fixed indent problem in GLICController
1781
1782 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1783 Check for disklabel type "loop" and use the device name without a minor.
1784
1785 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1786 Remove /tmp/compile_output.log and /var/log/install.log when install is
1787 complete. Added code to (hopefully) keep 2nd thread running after install.
1788 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1789 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1790 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1791
1792 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1793 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1794 when unpacking tarball.
1795
1796 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1797 rewrote filesystem_tools. looks like it works so ripping out all the old
1798 filesystem_tools code.
1799
1800 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1801 Changed the print statements to logging in the partitioning BE code.
1802 the logger may need to be imported to the x86archtemplate. unknown yet.
1803 Added the finishing_cleanup function.
1804 added a fix to the logger from BenUrban
1805
1806 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1807 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1808 URIs. The blank uri check has been commented out.
1809 ripped out error checking of set_services. this is done by _add_to_runlevel.
1810
1811 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1812 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1813
1814 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1815 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1816 the install profile if available. Commented out spawn() debugging prints
1817
1818 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1819 small changes to setup_network_post. moved adding to runlevel of net.x to
1820 after the device gets symlinked. added domainname runlevel command.
1821
1822 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1823 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1824 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1825 spawn() call in livecd-kernel code to pass environment variables.
1826 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1827 the install profile if available.
1828
1829 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1830 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1831 to handle installing the livecd kernel into the new system.
1832
1833 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1834 should emerge hotplug and coldplug before adding them to runlevel.
1835
1836 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1837 took chroot out of grub_install command.
1838
1839 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1840 Changed chroot wrapper code in spawn() to write the wrapper the python way
1841 instead of the bash way to avoid quote conflicts. Added
1842 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1843 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1844 as it breaks the piping.
1845
1846 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1847 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1848
1849 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1850 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1851 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1852 GLIInstallProfile.
1853
1854 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1855 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1856 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1857 into /mnt/gentoo in prepare_chroot()
1858
1859 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1860 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1861 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1862 to start/end sectors
1863
1864 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1865 Add 2>&1 to cmd in spawn()
1866
1867 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1868 Modified GLIUtility.exitsuccess() to work with return value from
1869 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1870 creates wrapper script for commands run inside chroot so multiple commands
1871 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1872 for the generated script from spawn()
1873
1874 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1875 Removed default values for stage tarball URI and portage tree URI from
1876 InstallProfile. These should be set by the FEs. also added services step to
1877 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1878 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1879
1880 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1881 Small fix for setting the default gateway. Also added feature to dialogfe.
1882
1883 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1884 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1885
1886 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1887 Fixed a bunch of true -> True typos. lots of em
1888 only write new resolv.conf if there are dns servers listed.
1889
1890 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1891 Commented out 'display_on_tty8=True' in start_portmap()
1892
1893 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1894 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1895
1896 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1897 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1898 lang parameter to __init__()
1899
1900 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1901 updates to TODO list.
1902
1903 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1904 Initial code for quickpkg GRP support. Fix loop to grab packages from
1905 'emerge -p blah'
1906
1907 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1908 check for dhcp in the network stuff and emerge it if it is.
1909 added quickpkg to TODO list
1910
1911 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1912 Changed the raising of 'warning' exceptions to a simple log of the error
1913 so that the installer can continue.
1914
1915 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1916 Some big changes. First, changed most output to display_on_tty8.
1917 Second, added log lines to all templates. Some smaller fixes such as typos.
1918 Also did some cleanups of old commented lines.
1919
1920 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1921 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1922 Undo change with fix. Escaping fix in GLIStorageDevice.py
1923
1924 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1925 more updates to TODO list. hopefully we'll soon start removing items instead
1926 of adding them.
1927
1928 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1929 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1930
1931 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1932 updated TODO list. (again)
1933
1934 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1935 changed output of portmap start to display_on_tty8.
1936 fixed bootloader for udev and multiple kernels
1937 fixed custom kernel config (again)
1938
1939 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1940 changed default value of CC._enable_ssh to True because this is smart.
1941 added code to allow custom kernel .config. may be unstable and break. sorry.
1942
1943 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1944 partition() now waits until after it checks for partition flags before delete
1945 the partitions :P
1946
1947 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1948 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1949 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1950 blank.
1951
1952 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1953 Various fixes related to the add_users function. Still not yet finished.
1954 Added things to the TODO list. Lets start using that!
1955
1956 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1957 Added code to x86Template to format newly created partitions. Also added
1958 some error checking code. GLIStorageDevice passes 'minor' with data to
1959 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1960 mounting code.
1961
1962 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1963 Took out unnecessary setting of random livecd root password. the cd already
1964 sets it randomly.
1965
1966 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1967 Took out an unneeded step from CC's run()
1968
1969 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1970 Attempt at detecting and adding windows partitions to lilo.
1971
1972 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1973 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1974 partition. fixed misc exit_status => exitstatus typo.
1975
1976 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1977 Added basic code for resizing filesystems with pyparted. Fixed code for
1978 resizing ntfs and ext2/3.
1979
1980 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1981 Fixed partition() in x86Template so that it scans through logicals and deletes
1982 before deleting containing extended partition. Also clears partition table to
1983 be safe before third pass.
1984
1985 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1986 Added mount_network_shares. not able to test it from this computer.
1987 will test when i get back to school.
1988 also added start_portmap to the client_controller as an always-do.
1989 agaffney says this is needed for NFS mounts to work.
1990
1991 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1992 Partial rewrite of partitioning code in x86Template. No longer shells out to
1993 parted to perform actions, now uses all pyparted calls. Code "works" in a
1994 test, but still needs lots of TLC. Also modified tests/install.py to work
1995 with x86Template and GLIClientConfiguration.
1996
1997 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1998 Initial move of partitioning code from ArchTemplate to x86Template.
1999
2000 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
2001 Added grp_install and services to InstallProfile. forgot about the set_root_password
2002
2003 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
2004 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
2005 agaffney. Test Install ran very well (skipping partitioning).
2006
2007 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
2008 My mid-day update. rewrote mount_local_partitions for order of mounting.
2009 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
2010 partition format. fixed a few _edit_configs. some may still have eluded me.
2011
2012 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
2013 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
2014 to test it.
2015 Just finished mount_local_partitions in GLIArchitectureTemplate
2016
2017 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
2018 Added get_num_sectors() to GLIStorageDevice.
2019
2020 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
2021 GLIStorageDevice now tracks partition boundaries in sectors instead of
2022 cylinders.
2023 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
2024 from GLIInstallProfile.
2025
2026 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2027 GLIStorageDevice returns "unknown" instead of "" for get_type()
2028
2029 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2030 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
2031 actually work. Commented out resizability checking code for speed.
2032
2033 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2034 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
2035 in GLIStorageDevice at the suggestion of plors
2036
2037 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2038 Added a function to GLIUtility to pull a value from a make.conf-style config
2039 file. Minor type fix to GLIInstallProfile.py
2040
2041 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2042 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
2043 Separated network mounts from partition data structure in GLIInstallProfile
2044
2045 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
2046 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
2047 can be resized.
2048
2049 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
2050 Added some of the final functions to GLIInstallTemplate.
2051 Yes this project is still active despite rare use of the Changelog!
2052
2053 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2054 Added the GLIPartitionTools.py file. This is a temporary insertion of
2055 partitioning tools that will eventually go into their own package.
2056
2057 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2058 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
2059 run-time for the program). Added __init__(install_profile,
2060 client_configuration) to GLI.InstallProfile. This sets install_profile and
2061 client_configuration once so as to avoid constantly passing stuff every time
2062 we call a method.
2063
2064 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2065
2066 Added another private method to GLI.InstallTemplate. _edit_config() modifies
2067 config files without messing up all the other stuff in them. This will be
2068 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
2069
2070 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2071
2072 Added GLI.InstallTemplate framework. This is not yet functional. However,
2073 it does have a few basic things. I added two private methods. One is
2074 _depends(). This will be used for dependency checking (ie. unpacking a
2075 tarball requires that partitioning has been done). The other is
2076 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
2077 instead of being run in the liveCD environment, it runs in the chroot. This
2078 requires a bit of fork() magic, so I isolated the code. Hope to work more
2079 this week to get this class formed...
2080
2081 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
2082 Added SAX parsing. Made GLI.InstallProfile a subclass of
2083 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
2084 to be lists instead of tuples to allow for easier modification (mutable,
2085 rather than immutable objects). Updated existing pydoc and added more.
2086 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
2087 GLI.py a bit. Fixed all accessors to use self references.
2088 Added initial unit test code.
2089
2090 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
2091 Added initial changelog. Setting up the basic structure of the CVS repository
2092 for the project. Added the UML class diagram in docs. Added a skeletal GLI
2093 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20