/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1867 - (show annotations) (download)
Sat Nov 17 20:58:53 2007 UTC (6 years, 9 months ago) by agaffney
File size: 86094 byte(s)
add get_kernpkgs_from_cd() function
1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2007 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.686 2006/09/15 16:37:11 agaffney Exp $
4
5 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIUtility:
7 add get_kernpkgs_from_cd() function
8
9 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
10 src/GLIInstallProfile.py:
11 add xdm, gdm, and kdm to package list
12
13 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
14 src/fe/dialog/gli-dialog.py:
15 modify root mountpoint check in gli-dialog to use a for/else and notify the
16 user why they're not being allowed to leave the screen
17
18 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
19 src/templates/x86ArchitectureTemplate.py:
20 move around parentheses to fix bug 179528
21
22 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
23 src/fe/gtk/InstallFailed.py:
24 correct bugzilla location for bug 178144
25
26 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
27 src/GLIArchitectureTemplate.py, src/fe/gtk/gtkfe.py:
28 fix error in debug mode for bug 178475
29 force install_type to networkless for gtkfe
30
31 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
32 src/GLIArchitectureTemplate.py:
33 set TIMEZONE in /etc/conf.d/clock for bug 158882
34
35 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
36 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
37 src/fe/gtk/InstallFailed.py, src/fe/gtk/gtkfe.py:
38 make install log location consistent throughout code
39 'View Log' button in gtkfe now looks for active and failed log
40
41 04 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org>
42 src/GLIInstallProfile.py:
43 Added x11-themes/gentoo-artwork-livecd to the list of extra packages.
44
45 04 Jan 2007; Preston Cody <codeman@gentoo.org>
46 ClientController:
47 took out the preinstall steps. these will now be handled by the frontends.
48 The actual code for the steps can be put in GLIUtility if necessary.
49 IP:
50 Took out partitioning. Added mounts.
51 Moved root mount point over from CF
52 Removed RP-PPPoE. was never used.
53 AT:
54 reordered functions. removed references to the client-config
55 fixed fstab and other locations that used mountpoints to use the new mounts.
56 removed unused rc.conf function.
57 other smaller touchups.
58 gli-dialog:
59 install_profile() to self._install_profile
60 fix reference to arch instaed of self._arch
61 x86AT:
62 fixed code to use mounts instead of partitioning.
63
64 01 Jan 2007; Preston Cody <codeman@gentoo.org>
65 fixing all instances of WINDOWSKEYS to WINDOWKEYS
66 added space in AT debug line.
67 more general updates in an effort to get the code functional
68
69 29 Oct 2006; Preston Cody <codeman@gentoo.org>
70 gli-dialog:
71 more rearranging of code. Tossed the review menu and not calling show_settings
72 not sure how those are going to turn out just yet.
73
74 22 Oct 2006; Andrew Gaffney <agaffney@gentoo.org>
75 src/Partitioning.py:
76 first round of refactoring for Partitioning.py (was GLISD)
77
78 22 Oct 2006; Preston Cody <codeman@gentoo.org>
79 gli-dialog:
80 added in the rest of the code from GLIGenDialog.
81 will start picking at it now.
82 moved the early questions such as advanced_mode/networkless
83 into functions in the GLIDialog class.
84
85 21 Oct 2006; Preston Cody <codeman@gentoo.org>
86 ClientController and gli-dialog and GLIGenDialog:
87 removing GenDialog, this code will be put into gli-dialog
88 moving some ClientController code into gli-dialog as well.
89 this is only the beginning :)
90
91 #------------------------------------------
92 # GLI SWITCHES TO SVN.
93
94 15 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIArchitectureTemplate.py:
96 use _wait_for_device_node() any place we were looping and checking before
97
98 13 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
99 src/GLIArchitectureTemplate.py:
100 add _wait_for_device_node()
101 src/GLIPortage.py:
102 raise an exception in get_deps() if pkglist is empty
103 -k option to install livecd-kernel to shut up wolf31o2 :P
104
105 11 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
106 src/GLIArchitectureTemplate.py:
107 break after installing 1 mta in install_mta()
108
109 10 Sep 2006; Preston Cody <codeman@gentoo.org>
110 src/GLIGenDialog.py:
111 rewrote how the USE flags work so that they are written correctly in relation
112 to the system's USE flags.
113 added a while condition on setting a user password
114 src/GLIArchitectureTemplate.py:
115 adding a self._mounted_devices to keep track of mounted partitions.
116 When cleaning up, only unmount these partitions. Not yet tested.
117
118 10 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
119 src/GLIStorageDevice.py:
120 properly identify apple_bootstrap partitions
121
122 9 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
123 src/GLIStorageDevice.py:
124 pay attention to 'ignoredparts' when reading partition table
125
126 3 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
127 src/GLIArchitectureTemplate.py:
128 force conversion of 'mb' to long
129
130 2 Sep 2006; Preston Cody <codeman@gentoo.org>
131 Lots of internationalization fixes. Point to a translation path called
132 languages in the dialog directory. Generated and added .pot files.
133 Added gettext to GLIIP for package descriptions.
134
135 01 Sep 2006; Chris Gianelloni <wolf31o2@gentoo.org>
136 src/GLIInstallProfile.py:
137 Added some more applications to the Extra Packages list.
138
139 1 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
140 src/templates/ppcArchitectureTemplate.py:
141 this doesn't need to inherit from x86AT or create an infinite loop by calling
142 its own __init__()
143 src/GLIArchitectureTemplate.py,src/templates/x86ArchitectureTemplate.py:
144 move partitioning code to GLIAT
145
146 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
147 src/GLIArchitectureTemplate.py:
148 pass quotes_around_value=False when adding default route to conf.d/net
149
150 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
151 src/GLIArchitectureTemplate.py:
152 copy backup custom.conf from livecd if present
153
154 *GLI-0.4 (31 Jul 2006)
155
156 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
157 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
158 doing the testing and coming up with the patch.
159
160 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
161 src/GLIArchitectureTemplate.py:
162 skip blank entries/files in update_config_files()
163
164 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
165 src/templates/x86ArchitectureTemplate.py:
166 move logical clipping logic a bit
167
168 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
169 I've commented out most of the code that used launch. It wasn't working and
170 we don't have the time to fix it before the release. I'll look into it after
171 the release and make it more robust and flexible.
172
173 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/templates/x86ArchitectureTemplate.py:
175 clip logical partition at end of extended
176
177 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
178 src/GLIInstallProfile.py:
179 Added a few more applications to the list of extra packages to be merged,
180 all from various GRP sets.
181
182 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
183 Added launch variable to the end of each try-run with auth, which should
184 cause this to function properly. Of course, more testing is needed.
185
186 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
187 Fix a missed space in the installer script.
188
189 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
190 src/GLIClientConfiguration.py:
191 adding 'None' with capital N so that the frontends can parse the network type
192
193 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
194 src/GLIClientController.py:
195 log version-stamp
196
197 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
198 Updated the installer script to allow specifying the front-end to run from
199 the command line. Currently, it only supports dialog and gtk. It still needs
200 some testing, however.
201
202 9 July 2006; Preston Cody <codeman@gentoo.org>
203 src/GLIGenDialog.py:
204 make lilo only show up for x86 if non-networkless
205
206 25 Jun 2006; Preston Cody <codeman@gentoo.org>
207 src/GLIGenDialog.py:
208 adding code to auto-add doscsi if a scsi drive detected.
209 this code is also in the gtkfe already
210
211 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
212 src/GLIPortage.py:
213 pass proper PORTAGE_TMPDIR
214
215 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
216 src/GLIUtility.py:
217 fix list_mirrors() to ignore <uri> lines that don't end on the same line
218
219 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
220 Added code to the mta step in AT to parse the install packages list and
221 look for mtas and if it finds it emerge it.
222 Initial attempt at moving extra_packages early in the setup to only show
223 local USE flags relating to those packages.
224 .. abandoned local USE project. no right way to do it.
225
226 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
227 src/GLIUtility.py:
228 minor tweak to regex for parsing mirrors.xml
229
230 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
231 src/templates/x86ArchitectureTemplate.py:
232 make use of strict_start and strict_end in partition recreation
233
234 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
235 src/templates/x86ArchitectureTemplate.py:
236 add strict_start and strict_end parameters to _add_partition()
237 add _find_current_minor_for_part() function to help with resizing
238 fix logical/extended logic in _partition_delete_step()
239 in _partition_resize_step(), delete, recreate at new size, resize, delete
240 call resize2fs with no size argument so it fills entire partition
241 more logging
242 only delete, recreate, resize, delete if growing
243 pass new size to resize2fs in K
244
245 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
246 src/GLIStorageDevice.py:
247 call reorder_minors() from tidy_partitions() instead of
248 set_partitions_from_disk()
249 add code to reorder_minors() to take extended/logical into consideration with
250 non-free partitions
251
252 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
253 added a check of the length of the directory in /usr/src if under 6 characters
254 should fix bug 131809
255
256 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
257 src/GLIArchitectureTemplate.py:
258 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
259 and livecd-kernel
260
261 16 Apr 2006; Preston Cody <codeman@gentoo.org>
262 src/GLIGenDialog.py:
263 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
264
265 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
266 src/GLIInstallProfile.py:
267 change kernel-modules to not be so stupid
268
269 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
270 GLIMD: fix display problem with execute.pyhtml.
271 make tables better.
272
273 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
274 src/GLIInstallProfile.py:
275 fix handling of int/float for minor
276 src/templates/x86ArchitectureTemplate.py:
277 save/restore partition name
278 src/GLIStorageDevice.py:
279 support for partition name
280
281 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
282 touchups to add_profile in GLIMD to link to webgli
283 add a save to GLIMD profile button in webgli's saveprofile
284 gliserv.py:
285 initial attempt at custom networking info per client. hostname support only.
286
287 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
288 src/net/server/html/webgli/partitioning[234].pyhtml:
289 small fixes for new partioning code
290
291 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
292 src/GLIClientController.py:
293 record PID of secondary thread
294
295 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
296 src/GLIGenDialog.py:
297 small fix for new partitioning code
298
299 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
300 src/GLIStorageDevice.py:
301 add get_devnode()
302 fix up detect_devices() to detect cciss/ida arrays
303 src/templates/x86ArchitectureTemplate.py:
304 use get_devnode() instead of figuring out the devnode
305 skip first 3 steps if partition layout hasn't changed
306 wipe disk and create new disklabel before recreating partitions
307 src/GLIArchitectureTemplate.py:
308 use get_devnode() in local mount and fstab stuff
309
310 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
311 src/GLIStorageDevice.py:
312 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
313
314 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
315 src/templates/x86ArchitectureTemplate.py:
316 continue breakup/cleanup of partitioning code
317
318 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
319 src/GLIStorageDevice.py:
320 set disklabel to default for arch when clearing the partition table
321 src/templates/x86ArchitectureTemplate.py:
322 complete rewrite of first and second passes
323
324 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
325 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
326 allow iterating over Device object to get partitions
327
328 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
329 src/GLIStorageDevice.py:
330 allow access to Device object like a dict
331
332 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
333 src/GLIStorageDevice.py:
334 allow access to Partition object like a dict
335
336 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
337 src/templates/x86ArchitectureTemplate.py:
338 fail if any filesystems are mounted on the device being partitioned
339
340 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
341 src/GLIStorageDevice.py:
342 reorder minor numbers when loading partitions from disk to match the physical
343 partition order
344
345 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
346 src/GLIStorageDevice.py:
347 overhaul for supporting mac disklabels and partitions out of disk order
348 remove free space from inside extended partition when extended is removed
349
350 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
351 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
352 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
353 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
354 Added bash scripts, icons, and desktop entries from the ebuild to make my
355 life easier.
356
357 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
358 src/GLIStorageDevice.py:
359 raise an exception if the existing partitions are out of disk order
360 look for minors out of order instead of disk position
361
362 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
363 src/fe/dialog/gli-dialog and src/GLIGenDialog:
364 added networkless mode to gli-dialog.
365
366 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
367 src/templates/x86AT:
368 add windows detection code for grub. untested.
369
370 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
371 src/templates/x86ArchitectureTemplate.py:
372 bootloader and partitioning external commands log to compile_output.log
373 wait for device node to exist before resizing
374 add -v to ntfsresize command
375 src/GLIStorageDevice.py:
376 return start/end with ip structure
377 pad min ntfs size by 50 MB just to be safe
378 src/GLIArchitectureTemplate.py:
379 only install filesystem tools for partitions with a mountpoint
380
381 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
382 add error catching and text to saving profile dialogs
383
384 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
385 src/GLIPortage.py:
386 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
387 src/templates/x86ArchitectureTemplate.py:
388 fix checks for changed partitions so they will actually get deleted
389
390 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
391 src/GLIClientController.py:
392 slightly better error handling for pre-install failures
393
394 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
395 src/templates/x86ArchitectureTemplate.py:
396 proper return code checking for ext2/3 resizing
397
398 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
399 src/GLIClientController.py:
400 accept 'none' as well as 'null' for network type
401 src/GLIArchitectureTemplate.py:
402 ignore extended partitions in mount_local_partitions()
403 src/templates/x86ArchitectureTemplate.py:
404 use get_ordered_partition_list() instead of keys().sort() for new_part_list
405 check to make sure start sector for primary isn't less than end sector for
406 previous extended
407 src/GLIClientController.py:
408 write dns servers to /etc/resolv.conf
409
410 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
411 src/GLIPortage.py:
412 copy_pkg_to_chroot() uses compile_output.log for command output
413
414 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
415 only keep a 1000 line 'scrollback' buffer for the compile output and log file
416
417 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
418 src/GLIPortage.py:
419 add code make GLIPortage.py capable of being run stand-along for dynamic
420 stage3 generation and copying packages in a GRP-ish way
421 grp code fixups
422
423 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
424 src/GLIPortage.py:
425 ignore blank packages passed to get_deps() and emerge()
426
427 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
428 src/GLIUtility.py:
429 add get_chosts() function
430
431 *GLI-0.3 (12 Feb 2006)
432
433 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
434 src/templates/x86ArchitectureTemplate.py:
435 pull old start/end sector values from somewhere that actually has them
436 add logic for extended partition to code that makes sure new end sector
437 doesn't overlap start sector of next partitions
438 don't freak out if partition can't be deleted
439
440 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
441 src/GLIPortage.py:
442 run env-update at the end of copy_pkg_to_chroot()
443
444 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
445 src/templates/x86ArchitectureTemplate.py:
446 I'm a complete fscking dumbass. I recorded the end sector for partitions that
447 weren't being touched, but I never used it when recreating them...the end was
448 calculated from the size in MB instead :/
449
450 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
451 src/GLIArchitectureTemplate.py:
452 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
453 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
454 src/GLIPortage.py:
455 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
456 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
457 'resized' flag
458
459 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
460 src/GLIPortage.py:
461 short circuit and check vdb directly if package begins with '='
462
463 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
464 added more packages to extra_packages list in IP
465
466 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
467 src/templates/x86ArchitectureTemplate.py:
468 10 tries to create filesystem instead of 3
469 src/GLIPortage, src/GLIArchitectureTemplate.py:
470 ignore_missing flag for copy_pkg_to_chroot()
471
472 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
473 src/GLIPortage.py:
474 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
475
476 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
477 src/net/server/gliserv.py:
478 fix handling of 404 for real files
479 src/net/server/GLIServerProfile.py:
480 look for 'hostname' in attributes instead of 'name'
481
482 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
483 src/SimpleXMLParser.py:
484 initial support for 'include' in XML files
485 src/GLIStorageDevice.py:
486 initial support for %
487 src/GLIClientController.py:
488 add debugging statements to pre-install steps
489
490 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
491 webgli/configfiles:
492 check for key in etc_files['rc.conf'] to fix key error
493 webgli/timezone: small fix.
494 webgli/extrapackages: list-type fix
495 webgli/services: same
496 glimd: add/edit_client updates.
497
498 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
499 added configure.pyhtml to glimd. minor changes
500 to top and add_client. fixed up showargs.
501 added execute.pyhtml
502 changed register clients line in gliserv for name->hostname.
503 updated TODO.
504
505 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
506 src/net/server/*:
507 added add/del/edit client/profile.pythml for glimd.
508 updated templates, showclients, and gliserv.
509
510 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
511 src/net/server/*:
512 stupid threading module...
513
514 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
515 AT: rc.conf -> conf.d/clock
516
517 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
518 src/GLIPortage.py:
519 show 'Calculating dependencies for ...' in subprogress bar at beginning of
520 emerge()
521 src/GLIArchitectureTemplate.py:
522 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
523 in the chroot
524 remove _quickpkg_deps() and _portage_best_{visible,version}()
525 src/GLIUtility.py:
526 fail immediately in validate_uri() if provided URI can't be parsed
527 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
528 debug code in spawn()
529 use lower-level os.read() instead of file.read() because python sucks
530 src/templates/x86ArchitectureTemplate.py:
531 basic subprogress reporting for partitioning
532 total_steps was 1 too high
533
534 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
535 src/GLIUtility.py:
536 move parse_vdb_contents() to GLIPortage
537 src/GLIPortage.py:
538 remove all symlink fixups
539 ignore 'dir' entries in CONTENTS
540 call tar with -p
541
542 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
543 AT: bootsplash is now gensplash
544 gliserv: add advanced_mode to shared_info
545 webgli: Added advanced mode. mostly just disables a few screens.
546
547 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
548 src/GLIPortage.py:
549 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
550 added emerge()
551 update sub-progress after each package is emerged
552 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
553 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
554 remove link if it exists before moving content into place
555 src/GLIArchitectureTemplate.py:
556 install_packages() now calls emerge() in GLIPortage
557 change all calls to self._emerge() to self._portage.emerge()
558 comment out all emerge status checking...using exceptions now
559 call copy_pkg_to_chroot() directly for livecd-kernel
560
561 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
562 src/GLIArchitectureTemplate.py:
563 remove add_pkg_to_world() and copy_pkg_to_chroot()
564 copy installer.log to installer.log.failed on install failure
565 src/GLIUtility.py:
566 added get_keymaps()
567 spawn() takes any False argument for chroot instead of just None
568 src/GLIPortage.py:
569 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
570 change copy_pkg_to_chroot() to work properly with use_root=False
571 figure PORTAGE_TMPDIR properly
572
573 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
574 src/net/server/html/*:
575 converted showclients, load/saveprofile
576
577 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
578 src/GLIPortage.py:
579 exclude packages already in chroot vdb from binary deplist
580 chroot to use best_version for chroot's vdb
581 src/runtimedeps.py:
582 accept ROOT via commandline instead of env
583
584 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
585 src/runtimedeps.py:
586 remove passing of ROOT
587 src/GLIPortage.py:
588 modify get_deps() to get deptree for each package and merge into final list
589 remove depgraph class
590 add debugging code to get_deps()
591 src/GLIArchitectureTemplate.py:
592 combine code for GRP/compile in install_packages() into one block
593 debugging code in install_packages()
594
595 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
596 src/runtimedeps.py:
597 initial commit
598 src/GLIPortage.py:
599 use separate script for GRP deps
600 remove calls to portage module
601
602 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
603 src/GLIPortage.py:
604 initial commit
605 move some of portage function from GLIAT
606 flipped around a few function args
607 src/GLIArchitectureTemplate.py:
608 revamp install_packages() for new GLIPortage
609
610 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
611 src/GLIArchitectureTemplate.py:
612 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
613
614 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
615 src/net/server/gliserv.py:
616 wrap generated code in a class to isolate it a bit better
617 302 redirects work
618 don't use cgi.escape() for <% %>
619 src/net/server/html/webgli/*:
620 load/save profile
621 src/GLIUtility.py:
622 change /sbin/lspci to just lspci
623
624 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
625 src/GLIClientController.py:
626 change ordering of statements in CC run() while loop to not go past the end
627 of the array
628 src/GLIArchitectureTemplate.py:
629 removed redundant bind mounts
630
631 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
632 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
633 added a diagram by blackace from last night.
634 added the glossary in RTF format.
635
636 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
637 x86AT: separated out emerge/configure from running of bootloader
638 added MBR drive support to lilo.
639 these changes will likely not work.
640 AT: added setup_and_run_bootloader step.
641
642 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
643 src/net/server/gliserv.py:
644 call generated code in a function
645 src/net/server/html/webgli/*:
646 include top/bottom
647 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
648 src/GLIClientCongifuration.py:
649 install mode magic
650
651 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
652 src/GLIClientController.py:
653 use GLIException when there's an import problem
654 added debug code to show install_steps
655 src/templates/amd64ArchitectureTemplate.py:
656 add . to import path
657 proper path this time: ../../templates
658 src/GLIArchitectureTemplate.py:
659 add _portage_best_version() function
660
661 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
662 added initial glossary and gimli diagram to the docs directory.
663 modify gli-dialog to allow editing of the install_profile after loading XML.
664
665 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
666 src/net/server/html/webgli/:
667 converted globaluse, localuse, networkmounts, portagetree, and stageselection
668 moved saveclientconfig stuff into clientconfig
669 moved saveconfigfiles into config files
670 converted etc_portage and makedotconf
671 converted bootloader and kernel
672 convert daemons, extrapackages, networking, review, services, timezone, users
673 src/net/server/gliserv.py:
674 proper 404 handling for .pyhtml extension
675 HTML escape <% %> stuff
676 work around python's sucky regexes
677 src/GLIInstallProfile.py:
678 allow set_{rsync,ftp,http}_proxy() to accept empty values
679
680 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
681 src/net/server/gliserv.py:
682 initial commit of Legolas templating engine
683 302 redirects
684 src/net/server/html/index.html, src/net/server/webgli_template.html:
685 minor changes for new code
686 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
687 initial commit of the conversion from the monolithic WebGLIHandler.py to the
688 one file per path Legolas goodness
689 partitioning[2-4] done
690
691 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
692 webgli: dhcp options in CC and post-install.
693 updated comparison chart.
694 webgli: etc/portage/* and distcc support added. not too-well tested.
695
696 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
697 webgli_template.html: valign=top on left side.
698 webgli: fix bootloader boot_device. now working.
699 webgli: CC proxy done. post-install proxy in progress.
700
701 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
702 src/net/server/webgli_template.html:
703 increase padding for content cell to 7px and add colspan=2
704
705 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
706 webgli: added graphic bar on top
707 webgli: added hover effects on the links on the left
708 webgli: re-rendered header_bg.png to stretch without artifacts
709
710 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
711 webgli: make.conf disabling fixes for dynamic_stage3
712 fixed portage snapshot browse popup
713 all changes tested.
714 webgli: add debug mode to CC screen. the screen still needs lots of work.
715
716 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
717 added debug mode question to gli-dialog
718 added CC proxies to CC networking for gli-dialog
719 webgli: fixed skip CC networking if connection active
720 webgli: portage snapshot defaults to CD
721 webgli: bootloader mbr drive selection
722 webgli: USE flags unselectable if dynamic_stage3
723 webgli: manual extra packages and save button.
724
725 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
726 src/GLIUtility.py:
727 change ping count to 2
728 docs/comparison.html
729 initial commit
730
731 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
732 src/templates/x86ArchitectureTemplate.py:
733 fix map() issue with grub code
734 replace kernel_names and initrd_names loops with one-liners
735
736 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
737 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
738 initial gli-dialog support for recommended partitioning layout and clear.
739 failure cleanup now an option for gli-dialog.
740 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
741 added comparison list and updated TODO!
742
743 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
744 src/GLIArchitectureTemplate.py:
745 fix to stage1() debug code
746 fix to stage2() debug code
747
748 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
749 some more bootloader code fixes. forgot boot_device != mbr_device.
750
751 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
752 src/GLIStorageDevice.py:
753 fix to unallocated space merging when last one is after part 4
754
755 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
756 src/GLIArchitectureTemplate.py:
757 small fix to debugging code in copy_pkg_to_chroot()
758
759 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
760 more bugfixes with bootloader code
761 gli-dialog side appears to work
762
763 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
764 initial adding of boot_device to backend.
765 initial boot_device support added to gli-dialog.
766 some fixes of my poor coding
767
768 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
769 converted gli-dialog to use the install_package_list.
770 gtkfe has already been converted by AllanonJL
771 new way working in gli-dialog now and added to webgli.
772 added set/get_boot_device() to IP
773
774 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
775 get_install_package_list added to InstallProfile. This can be used by the FEs
776
777 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
778 src/templates/x86ArchitectureTemplate.py:
779 call ls with '-1 --color=no'
780
781 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
782 added warning (#9) to GRP ppl about stage3 tarballs
783
784 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
785 src/GLIArchitectureTemplate.py:
786 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
787 confused
788
789 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
790 removed protocols from rc.conf screens
791 finished initial rc.conf and make.conf in webgli
792
793 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
794 src/net/server/gliserv.py:
795 add -h option to usage()
796 show time and request URI in debug mode
797 show client IP in debug mode
798 just use IP instead of trying to do a reverse lookup
799
800 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
801 src/net/server/gliserv.py:
802 'classier' 401 message
803 proper commandline parsing
804 help via -h
805 user/pass can be specificed via commandline option
806
807 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
808 src/net/server/gliserv.py:
809 basic HTTP auth
810
811 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
812 src/net/server/gliserv.py:
813 dynamic module reloading (yipee!)
814 send 'Last-Modified' header for real files
815 respond to HEAD with just headers
816 src/net/server/handlers/WebGLIHandler.py:
817 icons for drives
818
819 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
820 src/net/server/handlers/WebGLIHandler.py:
821 initial 'pretty' partition table display support
822 clicking partition in 'pretty' display works instead of radio buttons
823 radio buttons and pretty display work together
824 META redirect instead of javascript
825 pretty display stretches across entire screen
826 'Recommended layout' and 'Clear drive' functions
827 properly catch exceptions from do_recommended()
828 src/GLIArchitectureTemplate.py:
829 replace preinst, copy, postinst, rm steps with qmerge
830 whoops...that shouldn't have been commented out
831 create image_dir with -p in copy_pkg_to_chroot()
832 more generic of symlink crappiness
833 new copy_pkg_to_chroot() actually works now
834
835 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
836 src/GLIStorageDevice.py:
837 initial generic disk support
838 fixes for add_partition() code
839 src/net/server/handlers/WebGLIHandler.py:
840 added support for creating generic disks
841 add new partition working
842 save and delete partitions
843
844 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
845 webgli: Partitioning making progress.
846
847 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
848 src/GLIArchitectureTemplate.py:
849 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
850 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
851 dir) and works around /etc/gconf symlink problem
852
853 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
854 webgli: lots of updates. preliminary partitioning. extra packages works.
855
856 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
857 src/net/server/gliserv.py:
858 httpd now supports HTTPS and falls back to HTTP if not available
859 make fallback actually work
860 src/net/server/SecureXMLRPCServer.py:
861 SecureSocketServer is now threaded
862
863 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
864 src/net/client/gliclient.py:
865 try to use HTTPS for XMLRPC first and fallback to HTTP
866 pretend mode
867 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
868 HTTPS XMLRPC goodness from samyron
869 pass name of certificate
870
871 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
872 wegli: daemons and services screens done.
873
874 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
875 webgli: networking and users screens
876 added return_redirect to handler.py
877 loading and saving install/client profiles works for webgli now
878 Review also done
879
880 *GLI-0.2 (27 Oct 2005)
881
882 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
883 src/templates/x86ArchitectureTemplate.py:
884 properly check for bootloader emerge exist status with exitsuccess()
885 log output of grub install command
886 add --batch --no-floppy to grub command
887 grubinstallstring only gets logged if debug is on
888 src/GLIUtility.py:
889 update progress bar to 100% when process finishes
890
891 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
892 src/GLIClientController.py:
893 added debugging code for the interaction between the 2 threads via Event()
894 src/GLIUtility.py:
895 doubled the buffer size in spawn()
896 bump buffer size up to 16384
897 only report progress in 5% increments
898 src/GLIArchitectureTemplate.py:
899 kernelpkgs.txt support code
900 above disabled because it sucks
901 added add_pkg_to_world()
902
903 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
904 src/GLIArchitectureTemplate.py:
905 use tar | tar to copy files in copy_pkg_to_chroot()
906 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
907
908 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
909 DEBUGGING ADDED TO AT. verbose field added to CConfig.
910
911 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
912 src/net/server/gliserv.py:
913 / maps to index.html
914 look for actual files in html/
915 src/net/html:
916 new template
917 src/GLIUtility.py:
918 added parse_vdb_contents()
919 src/GLIArchitectureTemplate.py:
920 added copy_pkg_to_chroot()
921 added debug code to dynamic-stage3
922 switch dynamic-stage3 to new method
923 lots of bug fixes from adding debug code
924
925 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
926 webgli initial bootloader support + changed make.conf.
927 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
928
929 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
930 src/GLIUtility.py:
931 horrible tangled mess of code that is tarball unpacking subprogress display
932 add unpack progress to portage snapshot
933 use read() instead of readlines() in spawn()
934 only update progress bar for whole percents
935
936 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
937 src/templates/x86ArchitectureTemplate.py:
938 change call to 'grub' to use GLIUtility.exitsuccess()
939 add definition of 'build_mode' in _configure_lilo()
940 src/misc/updategtkfe, src/misc/updateglid:
941 fix so subshell is called in root shell
942
943 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
944 src/net/server/handlers/WebGLIHandler.py:
945 stage screen launches URI browser in sized window with various properties set
946
947 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
948 src/misc/updategtkfe:
949 updated to actually work
950 remove previous snapshot and extracted dir before downloading
951 src/misc/updateglid:
952 updated to actually work
953 src/templates/x86ArchitectureTemplate.py:
954 fixed bug where grub code was looking for 'root+root+file_name2'
955
956 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
957 src/net/server/handlers/WebGLIHandler.py:
958 URI browser
959 added mirror selection
960 src/GLIUtility.py:
961 ls via ssh strips off ending *
962
963 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
964 more updates to webgli. stage selection.
965
966 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
967 updated webgli with preliminary Network Mounts support.
968
969 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
970 GenDialog: string formatting and yes/no label fixes.
971 added WebGLI template for gliserv.py
972 added WebGLIHandler as well as a definition for it in gliserv.py
973 updates to the webgli files even though they won't be there for long.
974 Utility: remove exception for non-existant grppkgs.txt until the new livecd
975 goes public.
976
977 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
978 src/net/server/gliserv.py:
979 override dict to not be so anal
980 main server now loads separate module to handle requests
981 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
982 split out profile URLs into separate handler function
983 move handlers into subdirectory
984 add Welcome and Clients handlers
985
986 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
987 src/GLIUtility.py:
988 raise exception if password prompt received twice
989
990 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
991 src/GLIUtility.py:
992 removed rot13ify()
993
994 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
995 src/net/server/gliserv.py:
996 allow for param to be passed multiple times in GET
997 no XMLRPC functions return None
998 modify POST request parsing to only create a list if needed
999 fix GET request parsing so the list creation for multiple values works
1000 src/net/client/gliclient.py:
1001 various typo and type mismatch fixes
1002 exit after exception
1003
1004 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1005 src/net/client/gliclient.py:
1006 initial commit
1007 pass MAC to XMLRPC functions
1008 src/net/server/GLIServerProfile.py:
1009 rename GLIClientsProfiles to GLIServerProfile
1010
1011 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1012 src/net/server/gliserv.py:
1013 now handles POST requests
1014 move majority of request handling code to common_handler() to reduce code
1015 duplication
1016 profile loading
1017 client reg via XMLRPC goes into SharedInfo()
1018 /showclients redesign
1019 template fixes
1020 allow handler functions to add/change headers
1021 save profile
1022
1023 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1024 src/net/server/GLIClientsProfiles.py:
1025 initial commit
1026 src/net/server/template.html:
1027 initial commit
1028 src/net/server/gliserv.py:
1029 add template mojo
1030
1031 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1032 src/net/server/gliserv.py:
1033 XMLRPC mojo
1034
1035 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1036 src/GLIArchitectureTemplate.py:
1037 add code in _edit_config() to comment line where variable is defined
1038 previously
1039 insert new line under previous definition of variable if it exists
1040 small _edit_config() cleanup
1041 src/GLIStorageDevice.py:
1042 add clear_partitions() function
1043 new sizes for recommended partition layout
1044 automatically calculate swap size for recommended layout
1045
1046 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1047 src/templates/x86ArchitectureTemplate.py:
1048 fat16 mojo
1049
1050 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1051 src/GLIStorageDevice.py:
1052 prevent do_recommended() from being run twice
1053 rewrite do_recommended() to be more robust
1054 src/GLIArchitectureTemplate.py:
1055 rework _edit_config() to not write duplicate entries
1056
1057 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1058 src/GLIStorageDevice.py:
1059 added do_recommended() function to automatically created 256M/1G/* layout
1060
1061 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
1062 src/gli-dialog.py: added set_distcc to the list
1063 GenDialog: added set_distcc. untested.
1064 IP: added install_distcc flag.
1065 AT: added install_distcc function based on the flag. runs after build_kernel
1066 changed AT spawn command for distcc for nodeps.
1067
1068 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1069 src/GLIUtility.py:
1070 add rot13ify() function
1071
1072 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
1073 src/GenDialog.py:
1074 added a sentence of text. unchecking support added.
1075
1076 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
1077 src/GLIUtility.py:
1078 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
1079 src/GenDialog.py:
1080 still working on extra_packages. transformed the list to new format.
1081 added GRP indication to list. untested.
1082 TODO lists updated.
1083 src/fe/dialog/gli-dialog.py:
1084 spelling mistook.
1085
1086 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1087 src/GLIUtility.py:
1088 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
1089
1090 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1091 src/GLIUtility.py:
1092 add get_directory_listing_from_uri()
1093 add http support to above
1094 add ftp support to above
1095 add scp support to above
1096 src/GLIArchitectureTemplate.py:
1097 "0" instead of 0 for key of single-element dict passed to _edit_config()
1098
1099 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
1100 value_only -> only_value
1101
1102 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
1103 gutted out all of etc_portage structure since it is now all handled by
1104 etc_files
1105
1106 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1107 src/GLIArchitectureTemplate.py:
1108 install_packages() sends progress update notifications
1109 src/templates/x86ArchitectureTemplate.py:
1110 increase sleep to 5s between format tries
1111 src/GLIClientController.py:
1112 pass 'self' to AT instead of 'self._pretend'
1113
1114 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
1115 logger -> logger.log in x86AT
1116
1117 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
1118 added set_etc_portage to IP. debugging gli-d's support for it.
1119
1120 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1121 src/templates/x86ArchitectureTemplate.py:
1122 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
1123
1124 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1125 src/GLIArchitectureTemplate.py:
1126 add _portage_best_version() function and rework install_packages() to allow
1127 for future X of Y tracking
1128 Use best_visible instead of best_version
1129 tracked down and fixed missing = causing empty install extra packages
1130 use = when emerging also
1131 quickpkg hokey pokey
1132 run _get_packages_to_emerge() again with -pk
1133
1134 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
1135 src/ArchTemplate:
1136 removed install_xorg_x11, and put the xorg.conf copying at
1137 the end of install_packages.
1138 added updateglid to /src/misc
1139 updated all core files with new GPL notice and copyright statement.
1140
1141 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1142 src/GLIUtility.py:
1143 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
1144 a snapshot in /mnt/cdrom/snapshots/
1145 get_snapshot_from_cd() adds file:// at the beginning
1146 change calls to extra package special case functions to 'self.blah'
1147
1148 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
1149 src/ArchTemplate: changed "voodoo".
1150 changed order of portage sync methods. made a fallback to webrsync if
1151 normal emerge sync fails.
1152 removed get_sources_from_cd because it is obsolete.
1153 add special cases to install_packages. remove fatal exception on package
1154 install failure b/c the box will still be bootable.
1155 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1156 handled in the FEs.
1157 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1158 awaiting testing.
1159
1160 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1161 src/GLIStorageDevice.py:
1162 global try/except block around fs resizable detection code
1163 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1164 install-failed cleanup function
1165
1166 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1167 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1168
1169 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1170 GLIGenDialog:
1171 add drive choices for loaded configs.
1172 force snapshot for dynamic_stage3
1173 init the snapshoturi input to the cd snapshot if not already selected.
1174 if dynamic_stage3, skip the make.conf step.
1175 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1176 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1177
1178 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1179 src/GLIArchitectureTemplate.py:
1180 manually call MAKEDEV in stage3-dynamic code
1181 copy /etc/inittab.old to /etc/inittab in chroot
1182 src/GLIUtility.py:
1183 add beginning of validate_uri() function
1184 add file:/// support to validate_uri()
1185 single quotes when setting livecd password
1186
1187 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1188 src/GLIGenDialog.py:
1189 change getmountpoint() to get_mountpoint()
1190 src/misc/updategtkfe:
1191 committed script to automatically download latest snapshot and run gtkfe
1192 src/templates/x86ArchitectureTemplate.py:
1193 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1194 src/GLIArchitectureTemplate.py:
1195 give tmp_minor an initial value in mount_local_partitions so that the value
1196 remain from the previous drive
1197
1198 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1199 src/templates/x86ArchitectureTemplate.py:
1200 Fix _configure_lilo() for IP using GLISD stuff
1201 src/GLIArchitectureTemplate.py:
1202 install_cron_daemon() treats "none" specially
1203
1204 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1205 old patch from Steven Mertens to resolve bug #96642
1206 numerous asthetic changes to GenDialog, no real functionality changes though.
1207 strings renamed for global use if necessary.
1208 fix all three parts of bug 102291
1209 disable set_etc_portage until fully-written.
1210
1211 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1212 src/GLIClientController.py:
1213 lower-case http/ftp proxy envvars
1214
1215 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1216 src/GLIClientController.py:
1217 log end of pre_install steps to aid in debugging
1218 src/templates/x86ArchitectureTemplate.py:
1219 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1220
1221 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1222 src/GLIArchitectureTemplate.py:
1223 check to make sure that the device node we're wait for to exist isn't of
1224 type 'free'
1225
1226 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1227 src/GLIGenDialog.py:
1228 convert install_packages to list in set_extra_packages()
1229 check return code of checklist() call in "Manual" section
1230 *actually* fix the first problem
1231
1232 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1233 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1234 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1235
1236 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1237 src/GLIArchitectureTemplate.py:
1238 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1239
1240 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1241 Add CDATA support to SimpleXMLParser and add utility functions for it.
1242
1243 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1244 src/GLIArchitectureTemplate.py:
1245 Fix case where vixie-cron is specified as a full package atom, as we still
1246 don't want to run 'crontab /etc/crontab' for it.
1247
1248 *GLI-0.1 (3 Aug 2005)
1249
1250 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1251 add scp to list of is_uri() so GenDialog doesn't complain.
1252 fixed livecd-kernel bug in bootloader code.
1253 fixed gendialog for dynamic_stage3 instead of "networkless"
1254 change bootloader to allow for both initrd and initramfs.
1255 fix IP for dynamic_stage3.
1256 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1257
1258 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1259 Added full scp:// URI support to get_uri() in GLIUtility
1260 Remove "networkless" from dynamic stage3 if locic.
1261 Remove print statement from scp:// code.
1262 Change scp code to check for "assword: " instead of "Password:"
1263 Fix post-install network code to create net.eth1+ symlink correctly
1264 Check to make sure pkg can be split on / and some debugging code
1265 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1266 SimpleXMLParser handles True/False/None correctly now
1267 Comment out above fix
1268 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1269
1270 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1271 Removed a FIXME in the GLIClientConfiguration that is no
1272 longer needed.
1273
1274 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1275 Default to x86 in ClientConfig
1276 Typo in build-a-stage3 code.
1277 Remove MAKEDEV call in build-a-stage3 postscript.
1278
1279 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1280 Rewrote init of IP for gli-d. Other GenDialog updates.
1281 allow network_type to be None in CConfig.
1282
1283 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1284 Add _dynamic_stage3 option to IP.
1285 Add check for that option to dynamic stage3 code in ArchTemplate.
1286 Fix code to determine default route in get_eth_info() in GLIUtility.
1287 Fix serialization of dns-servers in ClientConfig.
1288
1289 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1290 changed default values of cron/logger in IP.
1291 moved GenDialog IP init out to the individual files. gli-dialog's version
1292 will change quite a bit.
1293
1294 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1295 added ppcArchTemplate. blank now. working on yaboot.
1296 modified ArchTemplate for amd64 and ppc custom kernels.
1297 skeleton implementation of _configure_yaboot.
1298 small fixes to other templates.
1299
1300 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1301 GenDialog updates. changed comment in IP.
1302
1303 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1304 src/GLIInstallProfile.py:
1305 Fix codeman's screwup of changing the service seperator to ',' in the parser
1306 without changing it in the serialization code! Also document this in a
1307 comment so you find it easier. Everybody needs to make sure they update
1308 their install profiles!
1309
1310 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1311 src/GLIArchitectureTemplate.py:
1312 Fix casting of list to string and concat of None with string, as well as
1313 commented prototype of checking that mounting actually worked (found a case
1314 where mount can return success, but the mount won't be done).
1315
1316 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1317 src/templates/x86ArchitectureTemplate.py:
1318 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1319 checking for the device, and sleeping 1 second each time.
1320
1321 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1322 src/templates/x86ArchitectureTemplate.py:
1323 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1324 bootloader works again. Also rename _install_{grub,lilo} to
1325 _configure_{grub,lilo} since they don't install the loaders anymore
1326 themselves.
1327
1328 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1329 fix global USE flags to not include the arch types at the end.
1330 updates to GenDialog and gli-d.
1331
1332 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1333 fixing bootloader code for no initrd and initrd->initramfs naming change.
1334
1335 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1336 Proper comments and parameters to GLIException in install_mta()
1337 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1338 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1339 list_tarball_from_mirror() to eliminate blank last item.
1340
1341 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1342 Added stage3 generation code.
1343
1344 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1345 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1346 Mild changes to GenDialog.
1347
1348 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1349 Remove separate install step configure_rc_conf() since it's handled by
1350 update_config_files()
1351 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1352 function is called twice on the same file.
1353
1354 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1355 Missing \ in sed in _get_packages_to_emerge()
1356 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1357 Check in _quickpkg_deps() to ignore blank package names returned from
1358 _get_packages_to_emerge()
1359
1360 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1361 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1362 in the dialog.py gauge code.
1363
1364 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1365 Add code to update_config_files() to go through etc_files and update stuff.
1366 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1367 Only use float() in partition xml parsing code if type == "free"
1368
1369 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1370 finished almost all internationalization of GenDialog.
1371 attempt at fixing rc.conf function. moved 3 generate functions out of
1372 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1373 added dialog.py to the fe/dialog directory so it actually gets used.
1374
1375 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1376 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1377
1378 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1379 fix extra entry in list_mirrors()
1380 beginning internationalization runthrough.
1381
1382 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1383 added dialog.py to /src temporarily until it gets accepted upstream.
1384 fix for unused value in form in dialog.py and changed heights.
1385 fix GenDialog forms.
1386
1387 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1388 Changed hostname/domainname for new baselayout.
1389 Changed _add_to_runlevel errors to logs.
1390 Updated TODO list to show status of GenDialog
1391 More updates to GenDialog including two checklists that probably won't work.
1392 update IP to use comma-separated list instead of space separated for services.
1393
1394 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1395 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1396 GenDialog as it gets closer to completion.
1397
1398 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1399 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1400 instead of int() in add_partition_device_partition() for minor (closes 96804)
1401
1402 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1403 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1404 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1405 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1406
1407 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1408 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1409 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1410 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1411 Fix undefined variable 'output' issue in spawn().
1412
1413 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1414 More updates to GenDialog and gli-d.
1415
1416 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1417 Modify list_mirrors() to return a list of mirror URL/name pairs.
1418
1419 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1420 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1421 get subarch.
1422
1423 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1424 Backend partitioning will create disklabel is none exists. Installprofile
1425 defaults to "" now instead of "msdos" for disklabel type. Fix for
1426 mount_local_partitions() to remember device along with minor in the
1427 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1428 add else block to log unsupported netmount types to mount_network_shares()
1429
1430 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1431 src/GLIArchitectureTemplate.py:
1432 Refactor kernel_compile common stuff, fix 2.4 build process.
1433 src/fe/cli/clife.py:
1434 Logging system.
1435 src/GLIUtility.py, src/GLIStorageDevice.py:
1436 Add comments about re-writes needed for boxes without sysfs.
1437
1438 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1439 src/GLIArchitectureTemplate.py:
1440 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1441 'make dep' call for custom compile. build_mode support for prepare-only and
1442 none types completed. custom compile function chains shell functions in
1443 spawned script, to allow for catching all errors.
1444
1445 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1446 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1447 and GenDialog. other gendialog updates as well. kernel updates untested.
1448
1449 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1450 src/GLIInstallProfile.py:
1451 Change structure of etc-portage stuff. The serialization was broken before my
1452 last commit, and I am the only person that's ever used it. The new schema is
1453 as follows:
1454 <etc-portage>
1455 <file name="package.mask"/>
1456 <file name="package.unmask">
1457 <entry atom="sys-kernel/openmosix-sources"/>
1458 </file>
1459 <file name="package.use">
1460 <entry atom="sys-libs/db">
1461 -java
1462 </entry>
1463 <entry atom="dev-libs/cyrus-sasl">
1464 -ldap
1465 </entry>
1466 </file>
1467 </etc-portage>
1468
1469
1470 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1471 src/GLIInstallProfile.py:
1472 Add new entry for gli-profile/kernel-build-method item. Add missing
1473 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1474 keys in the same order.
1475
1476 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1477 src/GLIArchitectureTemplate.py:
1478 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1479 was repeatedly appended to make.conf.
1480
1481 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1482 src/GLIArchitectureTemplate.py:
1483 Put some Linux-2.6 specific code under a if statement. Store list of
1484 successfully mounted swap device for using swapoff. Add proper error checking
1485 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1486 'file'. Clean up some redundant code (thanks to pychecker).'
1487
1488 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1489 Fix typos: get_extended() instead of get_extended_partition(). Added
1490 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1491 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1492
1493 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1494 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1495 in add_network_interface.
1496
1497 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1498 src/GLIArchitectureTemplate.py:
1499 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1500 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1501 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1502 prepare_chroot.
1503
1504 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1505 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1506 +src/fe/installer-gtk:
1507 Add new automated CLI frontend. Add scripts that are the intended means to
1508 use each frontend.
1509
1510 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1511 src/GLIClientController.py:
1512 Add null type to network config, for cases where the interface is already up
1513 and should not be touched (netboot for example).
1514
1515 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1516 src/GLIArchitectureTemplate.py:
1517 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1518 string!. Try to use binary packages if available by default.
1519
1520 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1521 src/GLIArchitectureTemplate.py:
1522 More error checking for _add_to_runlevel, to ensure that the init script
1523 actually exists before we try to add it. set_services phase must take place
1524 after the package installation, otherwise the init scripts might not exist.
1525 Find the correct init script for the cron and logging daemons, and add that
1526 instead of the package atom.
1527
1528 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1529 src/GLIArchitectureTemplate.py:
1530 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1531 usage of 'file' to 'contents' for the variable name, as it shadows
1532 __builtin__.file.
1533
1534 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1535 src/GLIArchitectureTemplate.py:
1536 Add MTA install code, and include MTA install phase. Ensure
1537 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1538 for 'none' kernel config for build_kernel phase. Put kernel_script in
1539 /var/tmp instead of /root for build_kernel phase.
1540
1541 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1542 Rename mta variables to match syslog/cron variables.
1543
1544 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1545 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1546 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1547 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1548 src/templates/.cvsignore, src/tests/.cvsignore:
1549 Refactor partition formatting again to include error checking. Allow 'none'
1550 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1551
1552 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1553 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1554 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1555 only have a single spawn call.
1556
1557 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1558 refixed samyron's fix of set_architecture_template.
1559
1560 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1561 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1562 be executable.
1563
1564 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1565 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1566 error checking when you call set_architecture_template.
1567
1568 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1569 moved the mkfsopts input to the partition options menu instead of the during
1570 the creation process. updated GenDialog to say it supports reiserfs v3.
1571
1572 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1573 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1574 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1575 Add support for other partition types to dialogfe.
1576 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1577 avoid integer overflows and wraparounds.
1578
1579 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1580 Removed start/end from XML output and added mkfsopts to partitioning info.
1581 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1582 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1583 in GLIClientConfiguration. Change from .1 and .9 to constants for
1584 partitioning. Fix free space overwriting bug. Remove a few unused functions
1585 from rewrite. Fix call to get_partition_at()
1586
1587 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1588 Updates to GenDialog and dialogfe.
1589
1590 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1591 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1592
1593 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1594 more GenDialog updates to partitioning.
1595
1596 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1597 Indenting issue in GLISD/get_ordered_partition_list.
1598 updates to GenDialog partitioning and added default UTC for timezone in IP.
1599
1600 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1601 Added GLISD.get_model()
1602
1603 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1604 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1605 More updates to GenDialog :)
1606
1607 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1608 Added get_interface_realname() function.
1609
1610 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1611 Added auto-save of CConfig and copying to new /root after install.
1612 yet even more GenDialog updates.
1613
1614 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1615 removed print statement from GLISD. more updates to GenDialog.
1616
1617 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1618 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1619 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1620 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1621 places in GLIClientConfiguration.
1622
1623 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1624 Fix mount_local_partitions(), configure_fstab(), and
1625 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1626 A few more fixes for templates/x86Archtemplate
1627
1628 27 May 2005; Preston Cody <codeman@gentoo.org> :
1629 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1630 a work in progress.
1631
1632 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1633 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1634 directly. GLISD can now handle data imported from XML.
1635
1636 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1637 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1638 handle blank (no disklabel) disks.
1639
1640 20 May 2005; Preston Cody <codeman@gentoo.org> :
1641 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1642 up, documented, and separated out serialization and grouped all sections.
1643
1644 19 May 2005; Preston Cody <codeman@gentoo.org> :
1645 Reorganization of ClientConfiguration and gutting of unused functions.
1646 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1647
1648 18 May 2005; Preston Cody <codeman@gentoo.org> :
1649 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1650
1651 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1652 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1653 partitioning. CC serializes install profile to disk and prepare_chroot()
1654 copies it into /mnt/gentoo/root
1655
1656 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1657 Moved URI parsing into new function parse_uri()
1658
1659 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1660 Added XMLParser module.
1661
1662 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1663 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1664 Minor fix to is_uri() regex to allow hyphens in hostname.
1665
1666 12 May 2005; Preston Cody <codeman@gentoo.org> :
1667 Updated finishing_cleanup for new unmounting method from agaffney.
1668
1669 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1670 Fix GLILogger to use correct time format string. Fix _edit_config() to
1671 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1672 unicode support to is_realstring().
1673
1674 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1675 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1676 return value instead of non-zero. Add code to output a traceback to the
1677 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1678 instead of --nocolor.
1679
1680 10 May 2005; Preston Cody <codeman@gentoo.org> :
1681 Added GLIGenDialog.py to make a generic class for the dialog functions that
1682 can be used by both dialogfe and the netfe/be. updated both for new filename.
1683 date changes. 2004->2005.
1684
1685 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1686 Removed 'quiet=True' from spawn() calls
1687
1688 10 May 2005; Preston Cody <codeman@gentoo.org> :
1689 Updated GLIUtility with patches from chotchki. Also added documentation
1690
1691 9 May 2005; Preston Cody <codeman@gentoo.org> :
1692 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1693 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1694 from bug #89683, mostly touchups.
1695
1696 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1697 GLIStorageDevice cleanup patch from bug #91761
1698
1699 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1700 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1701 _edit_config(). Error logging casts 'error' to str
1702
1703 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1704 Exceptions received in CC are logged before being passed to the FE. Added
1705 code to CC to handle exceptions *not* thrown by the installer itself.
1706
1707 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1708 get_max_mb_for_resize() returns -1 if not self.resizeable
1709
1710 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1711 More dirty rsync hacks :-/
1712
1713 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1714 Patches from chotchki (bug #90325) to improve CC networking. untested.
1715
1716 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1717 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1718 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1719 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1720 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1721 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1722 _get_packages_to_emerge()
1723
1724 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1725 Added group-adding code to set_users in ArchTemplate
1726
1727 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1728 Added post-install script code
1729
1730 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1731 Fixed encapsulation issues in GLIClientController (bug #90141)
1732
1733 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1734 Update resizing code in GLIStorageDevice
1735
1736 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1737 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1738
1739 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1740 Reverted change to ArchTemplate and added support for commented line in old
1741 code.
1742
1743 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1744 Changed _edit_config() to modify value in-place instead of commenting out and
1745 adding the new value to the end of the file.
1746
1747 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1748 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1749 Also updated TODO list.
1750
1751 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1752 Use blackace's one-liner to add comments for all function for use with
1753 pythondoc.
1754
1755 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1756 Moved 'end >= device_sectors' check out of loop to check for next partition's
1757 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1758 Partitioning code now tracks start/end of extended for placing logicals. End
1759 point of logical is now adjusted along with start.
1760
1761 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1762 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1763 the way of partitioning from a blank disk. Add int() around access to minor
1764 key in partition information due to new partition code leaving them as float.
1765
1766 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1767 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1768
1769 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1770 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1771
1772 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1773 Added support for DHCP options and MAC addresses in the InstallProfile.
1774
1775 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1776 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1777 sed to properly strip out junk.
1778
1779 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1780 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1781 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1782
1783 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1784 Fixed indent problem in GLICController
1785
1786 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1787 Check for disklabel type "loop" and use the device name without a minor.
1788
1789 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1790 Remove /tmp/compile_output.log and /var/log/install.log when install is
1791 complete. Added code to (hopefully) keep 2nd thread running after install.
1792 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1793 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1794 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1795
1796 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1797 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1798 when unpacking tarball.
1799
1800 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1801 rewrote filesystem_tools. looks like it works so ripping out all the old
1802 filesystem_tools code.
1803
1804 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1805 Changed the print statements to logging in the partitioning BE code.
1806 the logger may need to be imported to the x86archtemplate. unknown yet.
1807 Added the finishing_cleanup function.
1808 added a fix to the logger from BenUrban
1809
1810 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1811 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1812 URIs. The blank uri check has been commented out.
1813 ripped out error checking of set_services. this is done by _add_to_runlevel.
1814
1815 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1816 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1817
1818 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1819 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1820 the install profile if available. Commented out spawn() debugging prints
1821
1822 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1823 small changes to setup_network_post. moved adding to runlevel of net.x to
1824 after the device gets symlinked. added domainname runlevel command.
1825
1826 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1827 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1828 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1829 spawn() call in livecd-kernel code to pass environment variables.
1830 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1831 the install profile if available.
1832
1833 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1834 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1835 to handle installing the livecd kernel into the new system.
1836
1837 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1838 should emerge hotplug and coldplug before adding them to runlevel.
1839
1840 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1841 took chroot out of grub_install command.
1842
1843 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1844 Changed chroot wrapper code in spawn() to write the wrapper the python way
1845 instead of the bash way to avoid quote conflicts. Added
1846 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1847 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1848 as it breaks the piping.
1849
1850 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1851 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1852
1853 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1854 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1855 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1856 GLIInstallProfile.
1857
1858 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1859 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1860 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1861 into /mnt/gentoo in prepare_chroot()
1862
1863 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1864 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1865 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1866 to start/end sectors
1867
1868 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1869 Add 2>&1 to cmd in spawn()
1870
1871 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1872 Modified GLIUtility.exitsuccess() to work with return value from
1873 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1874 creates wrapper script for commands run inside chroot so multiple commands
1875 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1876 for the generated script from spawn()
1877
1878 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1879 Removed default values for stage tarball URI and portage tree URI from
1880 InstallProfile. These should be set by the FEs. also added services step to
1881 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1882 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1883
1884 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1885 Small fix for setting the default gateway. Also added feature to dialogfe.
1886
1887 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1888 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1889
1890 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1891 Fixed a bunch of true -> True typos. lots of em
1892 only write new resolv.conf if there are dns servers listed.
1893
1894 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1895 Commented out 'display_on_tty8=True' in start_portmap()
1896
1897 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1898 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1899
1900 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1901 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1902 lang parameter to __init__()
1903
1904 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1905 updates to TODO list.
1906
1907 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1908 Initial code for quickpkg GRP support. Fix loop to grab packages from
1909 'emerge -p blah'
1910
1911 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1912 check for dhcp in the network stuff and emerge it if it is.
1913 added quickpkg to TODO list
1914
1915 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1916 Changed the raising of 'warning' exceptions to a simple log of the error
1917 so that the installer can continue.
1918
1919 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1920 Some big changes. First, changed most output to display_on_tty8.
1921 Second, added log lines to all templates. Some smaller fixes such as typos.
1922 Also did some cleanups of old commented lines.
1923
1924 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1925 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1926 Undo change with fix. Escaping fix in GLIStorageDevice.py
1927
1928 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1929 more updates to TODO list. hopefully we'll soon start removing items instead
1930 of adding them.
1931
1932 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1933 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1934
1935 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1936 updated TODO list. (again)
1937
1938 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1939 changed output of portmap start to display_on_tty8.
1940 fixed bootloader for udev and multiple kernels
1941 fixed custom kernel config (again)
1942
1943 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1944 changed default value of CC._enable_ssh to True because this is smart.
1945 added code to allow custom kernel .config. may be unstable and break. sorry.
1946
1947 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1948 partition() now waits until after it checks for partition flags before delete
1949 the partitions :P
1950
1951 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1952 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1953 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1954 blank.
1955
1956 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1957 Various fixes related to the add_users function. Still not yet finished.
1958 Added things to the TODO list. Lets start using that!
1959
1960 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1961 Added code to x86Template to format newly created partitions. Also added
1962 some error checking code. GLIStorageDevice passes 'minor' with data to
1963 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1964 mounting code.
1965
1966 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1967 Took out unnecessary setting of random livecd root password. the cd already
1968 sets it randomly.
1969
1970 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1971 Took out an unneeded step from CC's run()
1972
1973 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1974 Attempt at detecting and adding windows partitions to lilo.
1975
1976 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1977 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1978 partition. fixed misc exit_status => exitstatus typo.
1979
1980 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1981 Added basic code for resizing filesystems with pyparted. Fixed code for
1982 resizing ntfs and ext2/3.
1983
1984 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1985 Fixed partition() in x86Template so that it scans through logicals and deletes
1986 before deleting containing extended partition. Also clears partition table to
1987 be safe before third pass.
1988
1989 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1990 Added mount_network_shares. not able to test it from this computer.
1991 will test when i get back to school.
1992 also added start_portmap to the client_controller as an always-do.
1993 agaffney says this is needed for NFS mounts to work.
1994
1995 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1996 Partial rewrite of partitioning code in x86Template. No longer shells out to
1997 parted to perform actions, now uses all pyparted calls. Code "works" in a
1998 test, but still needs lots of TLC. Also modified tests/install.py to work
1999 with x86Template and GLIClientConfiguration.
2000
2001 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
2002 Initial move of partitioning code from ArchTemplate to x86Template.
2003
2004 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
2005 Added grp_install and services to InstallProfile. forgot about the set_root_password
2006
2007 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
2008 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
2009 agaffney. Test Install ran very well (skipping partitioning).
2010
2011 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
2012 My mid-day update. rewrote mount_local_partitions for order of mounting.
2013 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
2014 partition format. fixed a few _edit_configs. some may still have eluded me.
2015
2016 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
2017 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
2018 to test it.
2019 Just finished mount_local_partitions in GLIArchitectureTemplate
2020
2021 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
2022 Added get_num_sectors() to GLIStorageDevice.
2023
2024 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
2025 GLIStorageDevice now tracks partition boundaries in sectors instead of
2026 cylinders.
2027 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
2028 from GLIInstallProfile.
2029
2030 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2031 GLIStorageDevice returns "unknown" instead of "" for get_type()
2032
2033 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2034 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
2035 actually work. Commented out resizability checking code for speed.
2036
2037 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2038 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
2039 in GLIStorageDevice at the suggestion of plors
2040
2041 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2042 Added a function to GLIUtility to pull a value from a make.conf-style config
2043 file. Minor type fix to GLIInstallProfile.py
2044
2045 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
2046 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
2047 Separated network mounts from partition data structure in GLIInstallProfile
2048
2049 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
2050 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
2051 can be resized.
2052
2053 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
2054 Added some of the final functions to GLIInstallTemplate.
2055 Yes this project is still active despite rare use of the Changelog!
2056
2057 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2058 Added the GLIPartitionTools.py file. This is a temporary insertion of
2059 partitioning tools that will eventually go into their own package.
2060
2061 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2062 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
2063 run-time for the program). Added __init__(install_profile,
2064 client_configuration) to GLI.InstallProfile. This sets install_profile and
2065 client_configuration once so as to avoid constantly passing stuff every time
2066 we call a method.
2067
2068 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2069
2070 Added another private method to GLI.InstallTemplate. _edit_config() modifies
2071 config files without messing up all the other stuff in them. This will be
2072 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
2073
2074 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
2075
2076 Added GLI.InstallTemplate framework. This is not yet functional. However,
2077 it does have a few basic things. I added two private methods. One is
2078 _depends(). This will be used for dependency checking (ie. unpacking a
2079 tarball requires that partitioning has been done). The other is
2080 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
2081 instead of being run in the liveCD environment, it runs in the chroot. This
2082 requires a bit of fork() magic, so I isolated the code. Hope to work more
2083 this week to get this class formed...
2084
2085 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
2086 Added SAX parsing. Made GLI.InstallProfile a subclass of
2087 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
2088 to be lists instead of tuples to allow for easier modification (mutable,
2089 rather than immutable objects). Updated existing pydoc and added more.
2090 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
2091 GLI.py a bit. Fixed all accessors to use self references.
2092 Added initial unit test code.
2093
2094 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
2095 Added initial changelog. Setting up the basic structure of the CVS repository
2096 for the project. Added the UML class diagram in docs. Added a skeletal GLI
2097 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20