/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 655 - (show annotations) (download)
Sun Jun 12 05:47:04 2005 UTC (9 years, 3 months ago) by robbat2
File size: 26018 byte(s)
Fix up _edit_config so that it works if the file doesn't already exist. Fix usage of 'file' to 'contents' for the variable name, as it shadows __builtin__.file.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.228 2005/06/12 05:47:04 robbat2 Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
8 src/GLIArchitectureTemplate.py:
9 Fix up _edit_config so that it works if the file doesn't already exist. Fix
10 usage of 'file' to 'contents' for the variable name, as it shadows
11 __builtin__.file.
12
13 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
14 src/GLIArchitectureTemplate.py:
15 Add MTA install code, and include MTA install phase. Ensure
16 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
17 for 'none' kernel config for build_kernel phase. Put kernel_script in
18 /var/tmp instead of /root for build_kernel phase.
19
20 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
21 Rename mta variables to match syslog/cron variables.
22
23 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
24 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
25 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
26 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
27 src/templates/.cvsignore, src/tests/.cvsignore:
28 Refactor partition formatting again to include error checking. Allow 'none'
29 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
30
31 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
32 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
33 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
34 only have a single spawn call.
35
36 11 Jun 2005; Preston Cody <codeman@gentoo.org>
37 refixed samyron's fix of set_architecture_template.
38
39 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
40 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
41 be executable.
42
43 10 Jun 2005; Scott Myron <samyron@gentoo.org>
44 Fixed one of the FIXME's in the ClientConfiguration. There is now some
45 error checking when you call set_architecture_template.
46
47 10 Jun 2005; Preston Cody <codeman@gentoo.org>
48 moved the mkfsopts input to the partition options menu instead of the during
49 the creation process. updated GenDialog to say it supports reiserfs v3.
50
51 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
52 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
53 Complete support for 'mkfsopts' parameter in main system and dialogfe.
54 Add support for other partition types to dialogfe.
55 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
56 avoid integer overflows and wraparounds.
57
58 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
59 Removed start/end from XML output and added mkfsopts to partitioning info.
60 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
61 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
62 in GLIClientConfiguration. Change from .1 and .9 to constants for
63 partitioning. Fix free space overwriting bug. Remove a few unused functions
64 from rewrite. Fix call to get_partition_at()
65
66 8 Jun 2005; Preston Cody <codeman@gentoo.org>
67 Updates to GenDialog and dialogfe.
68
69 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
70 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
71
72 6 Jun 2005; Preston Cody <codeman@gentoo.org>
73 more GenDialog updates to partitioning.
74
75 5 Jun 2005; Preston Cody <codeman@gentoo.org>
76 Indenting issue in GLISD/get_ordered_partition_list.
77 updates to GenDialog partitioning and added default UTC for timezone in IP.
78
79 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
80 Added GLISD.get_model()
81
82 3 Jun 2005; Preston Cody <codeman@gentoo.org>
83 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
84 More updates to GenDialog :)
85
86 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
87 Added get_interface_realname() function.
88
89 2 Jun 2005; Preston Cody <codeman@gentoo.org>
90 Added auto-save of CConfig and copying to new /root after install.
91 yet even more GenDialog updates.
92
93 1 Jun 2005; Preston Cody <codeman@gentoo.org>
94 removed print statement from GLISD. more updates to GenDialog.
95
96 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
97 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
98 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
99 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
100 places in GLIClientConfiguration.
101
102 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
103 Fix mount_local_partitions(), configure_fstab(), and
104 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
105 A few more fixes for templates/x86Archtemplate
106
107 27 May 2005; Preston Cody <codeman@gentoo.org>
108 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
109 a work in progress.
110
111 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
112 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
113 directly. GLISD can now handle data imported from XML.
114
115 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
116 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
117 handle blank (no disklabel) disks.
118
119 20 May 2005; Preston Cody <codeman@gentoo.org>
120 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
121 up, documented, and separated out serialization and grouped all sections.
122
123 19 May 2005; Preston Cody <codeman@gentoo.org>
124 Reorganization of ClientConfiguration and gutting of unused functions.
125 Removed verbose option from CC. Moved import statement in IP and CConfig up.
126
127 18 May 2005; Preston Cody <codeman@gentoo.org>
128 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
129
130 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
131 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
132 partitioning. CC serializes install profile to disk and prepare_chroot()
133 copies it into /mnt/gentoo/root
134
135 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
136 Moved URI parsing into new function parse_uri()
137
138 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
139 Added XMLParser module.
140
141 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
142 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
143 Minor fix to is_uri() regex to allow hyphens in hostname.
144
145 12 May 2005; Preston Cody <codeman@gentoo.org>
146 Updated finishing_cleanup for new unmounting method from agaffney.
147
148 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
149 Fix GLILogger to use correct time format string. Fix _edit_config() to
150 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
151 unicode support to is_realstring().
152
153 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
154 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
155 return value instead of non-zero. Add code to output a traceback to the
156 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
157 instead of --nocolor.
158
159 10 May 2005; Preston Cody <codeman@gentoo.org>
160 Added GLIGenDialog.py to make a generic class for the dialog functions that
161 can be used by both dialogfe and the netfe/be. updated both for new filename.
162 date changes. 2004->2005.
163
164 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
165 Removed 'quiet=True' from spawn() calls
166
167 10 May 2005; Preston Cody <codeman@gentoo.org>
168 Updated GLIUtility with patches from chotchki. Also added documentation
169
170 9 May 2005; Preston Cody <codeman@gentoo.org>
171 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
172 Updated _edit_config in ArchTemplate, make_config, and various other fixes
173 from bug #89683, mostly touchups.
174
175 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
176 GLIStorageDevice cleanup patch from bug #91761
177
178 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
179 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
180 _edit_config(). Error logging casts 'error' to str
181
182 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
183 Exceptions received in CC are logged before being passed to the FE. Added
184 code to CC to handle exceptions *not* thrown by the installer itself.
185
186 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
187 get_max_mb_for_resize() returns -1 if not self.resizeable
188
189 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
190 More dirty rsync hacks :-/
191
192 29 Apr 2005; Preston Cody <codeman@gentoo.org>
193 Patches from chotchki (bug #90325) to improve CC networking. untested.
194
195 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
196 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
197 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
198 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
199 GLIStorageDevice as suggested by pychecker. Fix minor bug in
200 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
201 _get_packages_to_emerge()
202
203 28 Apr 2005; Preston Cody <codeman@gentoo.org>
204 Added group-adding code to set_users in ArchTemplate
205
206 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
207 Added post-install script code
208
209 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
210 Fixed encapsulation issues in GLIClientController (bug #90141)
211
212 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
213 Update resizing code in GLIStorageDevice
214
215 17 Apr 2005; Preston Cody <codeman@gentoo.org>
216 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
217
218 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
219 Reverted change to ArchTemplate and added support for commented line in old
220 code.
221
222 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
223 Changed _edit_config() to modify value in-place instead of commenting out and
224 adding the new value to the end of the file.
225
226 15 Apr 2005; Preston Cody <codeman@gentoo.org>
227 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
228 Also updated TODO list.
229
230 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
231 Use blackace's one-liner to add comments for all function for use with
232 pythondoc.
233
234 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
235 Moved 'end >= device_sectors' check out of loop to check for next partition's
236 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
237 Partitioning code now tracks start/end of extended for placing logicals. End
238 point of logical is now adjusted along with start.
239
240 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
241 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
242 the way of partitioning from a blank disk. Add int() around access to minor
243 key in partition information due to new partition code leaving them as float.
244
245 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
246 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
247
248 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
249 Major GLIStorageDevice overhaul...all MB now instead of sectors.
250
251 8 Apr 2005; Scott Myron <samyron@gentoo.org>
252 Added support for DHCP options and MAC addresses in the InstallProfile.
253
254 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
255 Changed mountopts check to work for blank and whitespace. Pipe emerge through
256 sed to properly strip out junk.
257
258 2 Apr 2005; Preston Cody <codeman@gentoo.org>
259 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
260 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
261
262 31 Mar 2005; Preston Cody <codeman@gentoo.org>
263 Fixed indent problem in GLICController
264
265 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
266 Check for disklabel type "loop" and use the device name without a minor.
267
268 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
269 Remove /tmp/compile_output.log and /var/log/install.log when install is
270 complete. Added code to (hopefully) keep 2nd thread running after install.
271 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
272 get_eth_info() function. Remove most of content in amd64ArchTemplate and
273 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
274
275 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
276 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
277 when unpacking tarball.
278
279 28 Mar 2005; Preston Cody <codeman@gentoo.org>
280 rewrote filesystem_tools. looks like it works so ripping out all the old
281 filesystem_tools code.
282
283 26 Mar 2005; Preston Cody <codeman@gentoo.org>
284 Changed the print statements to logging in the partitioning BE code.
285 the logger may need to be imported to the x86archtemplate. unknown yet.
286 Added the finishing_cleanup function.
287 added a fix to the logger from BenUrban
288
289 25 Mar 2005; Preston Cody <codeman@gentoo.org>
290 changed InstallProfile to remove is_uri check on kernel, stage, and portage
291 URIs. The blank uri check has been commented out.
292 ripped out error checking of set_services. this is done by _add_to_runlevel.
293
294 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
295 set_stage_tarball_uri() doesn't raise an exception on a blank string.
296
297 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
298 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
299 the install profile if available. Commented out spawn() debugging prints
300
301 23 Mar 2005; Preston Cody <codeman@gentoo.org>
302 small changes to setup_network_post. moved adding to runlevel of net.x to
303 after the device gets symlinked. added domainname runlevel command.
304
305 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
306 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
307 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
308 spawn() call in livecd-kernel code to pass environment variables.
309 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
310 the install profile if available.
311
312 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
313 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
314 to handle installing the livecd kernel into the new system.
315
316 22 Mar 2005; Preston Cody <codeman@gentoo.org>
317 should emerge hotplug and coldplug before adding them to runlevel.
318
319 21 Mar 2005; Preston Cody <codeman@gentoo.org>
320 took chroot out of grub_install command.
321
322 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
323 Changed chroot wrapper code in spawn() to write the wrapper the python way
324 instead of the bash way to avoid quote conflicts. Added
325 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
326 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
327 as it breaks the piping.
328
329 20 Mar 2005; Preston Cody <codeman@gentoo.org>
330 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
331
332 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
333 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
334 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
335 GLIInstallProfile.
336
337 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
338 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
339 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
340 into /mnt/gentoo in prepare_chroot()
341
342 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
343 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
344 retarted behavior regarding threads and signals. Add code to convert MB/%/*
345 to start/end sectors
346
347 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
348 Add 2>&1 to cmd in spawn()
349
350 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
351 Modified GLIUtility.exitsuccess() to work with return value from
352 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
353 creates wrapper script for commands run inside chroot so multiple commands
354 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
355 for the generated script from spawn()
356
357 16 Mar 2005; Preston Cody <codeman@gentoo.org>
358 Removed default values for stage tarball URI and portage tree URI from
359 InstallProfile. These should be set by the FEs. also added services step to
360 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
361 Possibly fixed CC DHCP bug with -n. (thx agaffney)
362
363 14 Mar 2005; Preston Cody <codeman@gentoo.org>
364 Small fix for setting the default gateway. Also added feature to dialogfe.
365
366 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
367 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
368
369 1 Mar 2005; Preston Cody <codeman@gentoo.org>
370 Fixed a bunch of true -> True typos. lots of em
371 only write new resolv.conf if there are dns servers listed.
372
373 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
374 Commented out 'display_on_tty8=True' in start_portmap()
375
376 18 Feb 2005; Preston Cody <codeman@gentoo.org>
377 added progress bar to dialogfe and fix logger bug in ArchTemplate.
378
379 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
380 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
381 lang parameter to __init__()
382
383 10 Feb 2005; Preston Cody <codeman@gentoo.org>
384 updates to TODO list.
385
386 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
387 Initial code for quickpkg GRP support. Fix loop to grab packages from
388 'emerge -p blah'
389
390 6 Feb 2005; Preston Cody <codeman@gentoo.org>
391 check for dhcp in the network stuff and emerge it if it is.
392 added quickpkg to TODO list
393
394 5 Feb 2005; Preston Cody <codeman@gentoo.org>
395 Changed the raising of 'warning' exceptions to a simple log of the error
396 so that the installer can continue.
397
398 3 Feb 2005; Preston Cody <codeman@gentoo.org>
399 Some big changes. First, changed most output to display_on_tty8.
400 Second, added log lines to all templates. Some smaller fixes such as typos.
401 Also did some cleanups of old commented lines.
402
403 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
404 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
405 Undo change with fix. Escaping fix in GLIStorageDevice.py
406
407 31 Jan 2005; Preston Cody <codeman@gentoo.org>
408 more updates to TODO list. hopefully we'll soon start removing items instead
409 of adding them.
410
411 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
412 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
413
414 27 Jan 2005; Preston Cody <codeman@gentoo.org>
415 updated TODO list. (again)
416
417 25 Jan 2005; Preston Cody <codeman@gentoo.org>
418 changed output of portmap start to display_on_tty8.
419 fixed bootloader for udev and multiple kernels
420 fixed custom kernel config (again)
421
422 22 Jan 2005; Preston Cody <codeman@gentoo.org>
423 changed default value of CC._enable_ssh to True because this is smart.
424 added code to allow custom kernel .config. may be unstable and break. sorry.
425
426 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
427 partition() now waits until after it checks for partition flags before delete
428 the partitions :P
429
430 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
431 Updated TODO. swapon failure it temporarily not an error. swapon is an error
432 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
433 blank.
434
435 19 Jan 2005; Preston Cody <codeman@gentoo.org>
436 Various fixes related to the add_users function. Still not yet finished.
437 Added things to the TODO list. Lets start using that!
438
439 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
440 Added code to x86Template to format newly created partitions. Also added
441 some error checking code. GLIStorageDevice passes 'minor' with data to
442 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
443 mounting code.
444
445 18 Jan 2005; Preston Cody <codeman@gentoo.org>
446 Took out unnecessary setting of random livecd root password. the cd already
447 sets it randomly.
448
449 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
450 Took out an unneeded step from CC's run()
451
452 15 Jan 2005; Preston Cody <codeman@gentoo.org>
453 Attempt at detecting and adding windows partitions to lilo.
454
455 14 Jan 2005; Preston Cody <codeman@gentoo.org>
456 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
457 partition. fixed misc exit_status => exitstatus typo.
458
459 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
460 Added basic code for resizing filesystems with pyparted. Fixed code for
461 resizing ntfs and ext2/3.
462
463 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
464 Fixed partition() in x86Template so that it scans through logicals and deletes
465 before deleting containing extended partition. Also clears partition table to
466 be safe before third pass.
467
468 08 Jan 2005; Preston Cody <codeman@gentoo.org>
469 Added mount_network_shares. not able to test it from this computer.
470 will test when i get back to school.
471 also added start_portmap to the client_controller as an always-do.
472 agaffney says this is needed for NFS mounts to work.
473
474 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
475 Partial rewrite of partitioning code in x86Template. No longer shells out to
476 parted to perform actions, now uses all pyparted calls. Code "works" in a
477 test, but still needs lots of TLC. Also modified tests/install.py to work
478 with x86Template and GLIClientConfiguration.
479
480 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
481 Initial move of partitioning code from ArchTemplate to x86Template.
482
483 07 Jan 2005; Preston Cody <codeman@gentoo.org>
484 Added grp_install and services to InstallProfile. forgot about the set_root_password
485
486 07 Jan 2005; Preston Cody <codeman@gentoo.org>
487 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
488 Test Install ran very well (skipping partitioning).
489
490 05 Jan 2005; Preston Cody <codeman@gentoo.org>
491 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
492 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
493 some may still have eluded me.
494
495 05 Jan 2005; Preston Cody <codeman@gentoo.org>
496 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
497 Just finished mount_local_partitions in GLIArchitectureTemplate
498
499 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
500 Added get_num_sectors() to GLIStorageDevice.
501
502 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
503 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
504 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
505 from GLIInstallProfile.
506
507 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
508 GLIStorageDevice returns "unknown" instead of "" for get_type()
509
510 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
511 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
512 actually work. Commented out resizability checking code for speed.
513
514 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
515 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
516 GLIStorageDevice at the suggestion of plors
517
518 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
519 Added a function to GLIUtility to pull a value from a make.conf-style config
520 file. Minor type fix to GLIInstallProfile.py
521
522 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
523 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
524 network mounts from partition data structure in GLIInstallProfile
525
526 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
527 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
528 can be resized.
529
530 27 Oct 2004; Preston Cody <codeman@gentoo.org>
531 Added some of the final functions to GLIInstallTemplate.
532 Yes this project is still active despite rare use of the Changelog!
533
534 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
535 Added the GLIPartitionTools.py file. This is a temporary insertion of
536 partitioning tools that will eventually go into their own package.
537
538 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
539 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
540 for the program). Added __init__(install_profile, client_configuration) to
541 GLI.InstallProfile. This sets install_profile and client_configuration once so as
542 to avoid constantly passing stuff every time we call a method.
543
544 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
545
546 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
547 files without messing up all the other stuff in them. This will be used for making
548 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
549
550 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
551
552 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
553 have a few basic things. I added two private methods. One is _depends(). This
554 will be used for dependency checking (ie. unpacking a tarball requires that
555 partitioning has been done). The other is _exec_in_chroot(). This is the exact
556 same syntax as os.system(), however, instead of being run in the liveCD
557 environment, it runs in the chroot. This requires a bit of fork() magic, so I
558 isolated the code. Hope to work more this week to get this class formed...
559
560 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
561
562 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
563 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
564 to allow for easier modification (mutable, rather than immutable objects). Updated
565 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
566 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
567 Added initial unit test code.
568
569 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
570
571 Added initial changelog. Setting up the basic structure of the CVS repository
572 for the project. Added the UML class diagram in docs. Added a skeletal GLI
573 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20