/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 702 - (show annotations) (download)
Tue Jun 21 17:19:39 2005 UTC (9 years, 2 months ago) by agaffney
File size: 31530 byte(s)
Changed setup_network_post
  to check for 'interfaces[interface][0] != dhcp' instead of
  'interfaces[interface][1]' since DHCP uses that field for its options

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.255 2005/06/21 17:19:39 agaffney Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
8 Apply spawn() patch from #96644 (with minor changes). Make sure the return
9 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
10 small error with <pipe>.close() returning None. Fix space vs. tab issue.
11 Fix undefined variable 'output' issue in spawn(). Changed setup_network_post
12 to check for 'interfaces[interface][0] != "dhcp"' instead of
13 'interfaces[interface][1]' since DHCP uses that field for its options.
14
15 20 Jun 2005; Preston Cody <codeman@gentoo.org>
16 More updates to GenDialog and gli-d.
17
18 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
19 Modify list_mirrors() to return a list of mirror URL/name pairs.
20
21 19 Jun 2005; Preston Cody <codeman@gentoo.org>
22 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
23 get subarch.
24
25 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
26 Backend partitioning will create disklabel is none exists. Installprofile
27 defaults to "" now instead of "msdos" for disklabel type. Fix for
28 mount_local_partitions() to remember device along with minor in the
29 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
30 add else block to log unsupported netmount types to mount_network_shares()
31
32 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
33 src/GLIArchitectureTemplate.py:
34 Refactor kernel_compile common stuff, fix 2.4 build process.
35 src/fe/cli/clife.py:
36 Logging system.
37 src/GLIUtility.py, src/GLIStorageDevice.py:
38 Add comments about re-writes needed for boxes without sysfs.
39
40 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
41 src/GLIArchitectureTemplate.py:
42 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
43 'make dep' call for custom compile. build_mode support for prepare-only and
44 none types completed. custom compile function chains shell functions in
45 spawned script, to allow for catching all errors.
46
47 15 Jun 2005; Preston Cody <codeman@gentoo.org>
48 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
49 and GenDialog. other gendialog updates as well. kernel updates untested.
50
51 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
52 src/GLIInstallProfile.py:
53 Change structure of etc-portage stuff. The serialization was broken before my
54 last commit, and I am the only person that's ever used it. The new schema is
55 as follows:
56 <etc-portage>
57 <file name="package.mask"/>
58 <file name="package.unmask">
59 <entry atom="sys-kernel/openmosix-sources"/>
60 </file>
61 <file name="package.use">
62 <entry atom="sys-libs/db">
63 -java
64 </entry>
65 <entry atom="dev-libs/cyrus-sasl">
66 -ldap
67 </entry>
68 </file>
69 </etc-portage>
70
71
72 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
73 src/GLIInstallProfile.py:
74 Add new entry for gli-profile/kernel-build-method item. Add missing
75 serialize_etc_portage (temporary). Make serialize_make_conf always print the
76 keys in the same order.
77
78 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
79 src/GLIArchitectureTemplate.py:
80 Clean up commenting used by _edit_config(), and fix bug where wrong comment
81 was repeatedly appended to make.conf.
82
83 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
84 src/GLIArchitectureTemplate.py:
85 Put some Linux-2.6 specific code under a if statement. Store list of
86 successfully mounted swap device for using swapoff. Add proper error checking
87 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
88 'file'. Clean up some redundant code (thanks to pychecker).'
89
90 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
91 Fix typos: get_extended() instead of get_extended_partition(). Added
92 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
93 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
94
95 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
96 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
97 in add_network_interface.
98
99 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
100 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
101 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
102 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
103 prepare_chroot.
104
105 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
106 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
107 +src/fe/installer-gtk:
108 Add new automated CLI frontend. Add scripts that are the intended means to
109 use each frontend.
110
111 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
112 src/GLIClientController.py:
113 Add null type to network config, for cases where the interface is already up
114 and should not be touched (netboot for example).
115
116 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
117 src/GLIArchitectureTemplate.py:
118 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
119 string!. Try to use binary packages if available by default.
120
121 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
122 src/GLIArchitectureTemplate.py:
123 More error checking for _add_to_runlevel, to ensure that the init script
124 actually exists before we try to add it. set_services phase must take place
125 after the package installation, otherwise the init scripts might not exist.
126 Find the correct init script for the cron and logging daemons, and add that
127 instead of the package atom.
128
129 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
130 src/GLIArchitectureTemplate.py:
131 Fix up _edit_config so that it works if the file doesn't already exist. Fix
132 usage of 'file' to 'contents' for the variable name, as it shadows
133 __builtin__.file.
134
135 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
136 src/GLIArchitectureTemplate.py:
137 Add MTA install code, and include MTA install phase. Ensure
138 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
139 for 'none' kernel config for build_kernel phase. Put kernel_script in
140 /var/tmp instead of /root for build_kernel phase.
141
142 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
143 Rename mta variables to match syslog/cron variables.
144
145 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
146 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
147 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
148 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
149 src/templates/.cvsignore, src/tests/.cvsignore:
150 Refactor partition formatting again to include error checking. Allow 'none'
151 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
152
153 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
154 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
155 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
156 only have a single spawn call.
157
158 11 Jun 2005; Preston Cody <codeman@gentoo.org>
159 refixed samyron's fix of set_architecture_template.
160
161 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
162 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
163 be executable.
164
165 10 Jun 2005; Scott Myron <samyron@gentoo.org>
166 Fixed one of the FIXME's in the ClientConfiguration. There is now some
167 error checking when you call set_architecture_template.
168
169 10 Jun 2005; Preston Cody <codeman@gentoo.org>
170 moved the mkfsopts input to the partition options menu instead of the during
171 the creation process. updated GenDialog to say it supports reiserfs v3.
172
173 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
174 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
175 Complete support for 'mkfsopts' parameter in main system and dialogfe.
176 Add support for other partition types to dialogfe.
177 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
178 avoid integer overflows and wraparounds.
179
180 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
181 Removed start/end from XML output and added mkfsopts to partitioning info.
182 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
183 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
184 in GLIClientConfiguration. Change from .1 and .9 to constants for
185 partitioning. Fix free space overwriting bug. Remove a few unused functions
186 from rewrite. Fix call to get_partition_at()
187
188 8 Jun 2005; Preston Cody <codeman@gentoo.org>
189 Updates to GenDialog and dialogfe.
190
191 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
192 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
193
194 6 Jun 2005; Preston Cody <codeman@gentoo.org>
195 more GenDialog updates to partitioning.
196
197 5 Jun 2005; Preston Cody <codeman@gentoo.org>
198 Indenting issue in GLISD/get_ordered_partition_list.
199 updates to GenDialog partitioning and added default UTC for timezone in IP.
200
201 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
202 Added GLISD.get_model()
203
204 3 Jun 2005; Preston Cody <codeman@gentoo.org>
205 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
206 More updates to GenDialog :)
207
208 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
209 Added get_interface_realname() function.
210
211 2 Jun 2005; Preston Cody <codeman@gentoo.org>
212 Added auto-save of CConfig and copying to new /root after install.
213 yet even more GenDialog updates.
214
215 1 Jun 2005; Preston Cody <codeman@gentoo.org>
216 removed print statement from GLISD. more updates to GenDialog.
217
218 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
219 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
220 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
221 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
222 places in GLIClientConfiguration.
223
224 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
225 Fix mount_local_partitions(), configure_fstab(), and
226 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
227 A few more fixes for templates/x86Archtemplate
228
229 27 May 2005; Preston Cody <codeman@gentoo.org>
230 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
231 a work in progress.
232
233 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
234 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
235 directly. GLISD can now handle data imported from XML.
236
237 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
238 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
239 handle blank (no disklabel) disks.
240
241 20 May 2005; Preston Cody <codeman@gentoo.org>
242 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
243 up, documented, and separated out serialization and grouped all sections.
244
245 19 May 2005; Preston Cody <codeman@gentoo.org>
246 Reorganization of ClientConfiguration and gutting of unused functions.
247 Removed verbose option from CC. Moved import statement in IP and CConfig up.
248
249 18 May 2005; Preston Cody <codeman@gentoo.org>
250 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
251
252 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
253 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
254 partitioning. CC serializes install profile to disk and prepare_chroot()
255 copies it into /mnt/gentoo/root
256
257 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
258 Moved URI parsing into new function parse_uri()
259
260 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
261 Added XMLParser module.
262
263 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
264 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
265 Minor fix to is_uri() regex to allow hyphens in hostname.
266
267 12 May 2005; Preston Cody <codeman@gentoo.org>
268 Updated finishing_cleanup for new unmounting method from agaffney.
269
270 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
271 Fix GLILogger to use correct time format string. Fix _edit_config() to
272 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
273 unicode support to is_realstring().
274
275 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
276 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
277 return value instead of non-zero. Add code to output a traceback to the
278 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
279 instead of --nocolor.
280
281 10 May 2005; Preston Cody <codeman@gentoo.org>
282 Added GLIGenDialog.py to make a generic class for the dialog functions that
283 can be used by both dialogfe and the netfe/be. updated both for new filename.
284 date changes. 2004->2005.
285
286 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
287 Removed 'quiet=True' from spawn() calls
288
289 10 May 2005; Preston Cody <codeman@gentoo.org>
290 Updated GLIUtility with patches from chotchki. Also added documentation
291
292 9 May 2005; Preston Cody <codeman@gentoo.org>
293 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
294 Updated _edit_config in ArchTemplate, make_config, and various other fixes
295 from bug #89683, mostly touchups.
296
297 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
298 GLIStorageDevice cleanup patch from bug #91761
299
300 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
301 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
302 _edit_config(). Error logging casts 'error' to str
303
304 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
305 Exceptions received in CC are logged before being passed to the FE. Added
306 code to CC to handle exceptions *not* thrown by the installer itself.
307
308 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
309 get_max_mb_for_resize() returns -1 if not self.resizeable
310
311 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
312 More dirty rsync hacks :-/
313
314 29 Apr 2005; Preston Cody <codeman@gentoo.org>
315 Patches from chotchki (bug #90325) to improve CC networking. untested.
316
317 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
318 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
319 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
320 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
321 GLIStorageDevice as suggested by pychecker. Fix minor bug in
322 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
323 _get_packages_to_emerge()
324
325 28 Apr 2005; Preston Cody <codeman@gentoo.org>
326 Added group-adding code to set_users in ArchTemplate
327
328 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
329 Added post-install script code
330
331 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
332 Fixed encapsulation issues in GLIClientController (bug #90141)
333
334 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
335 Update resizing code in GLIStorageDevice
336
337 17 Apr 2005; Preston Cody <codeman@gentoo.org>
338 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
339
340 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
341 Reverted change to ArchTemplate and added support for commented line in old
342 code.
343
344 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
345 Changed _edit_config() to modify value in-place instead of commenting out and
346 adding the new value to the end of the file.
347
348 15 Apr 2005; Preston Cody <codeman@gentoo.org>
349 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
350 Also updated TODO list.
351
352 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
353 Use blackace's one-liner to add comments for all function for use with
354 pythondoc.
355
356 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
357 Moved 'end >= device_sectors' check out of loop to check for next partition's
358 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
359 Partitioning code now tracks start/end of extended for placing logicals. End
360 point of logical is now adjusted along with start.
361
362 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
363 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
364 the way of partitioning from a blank disk. Add int() around access to minor
365 key in partition information due to new partition code leaving them as float.
366
367 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
368 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
369
370 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
371 Major GLIStorageDevice overhaul...all MB now instead of sectors.
372
373 8 Apr 2005; Scott Myron <samyron@gentoo.org>
374 Added support for DHCP options and MAC addresses in the InstallProfile.
375
376 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
377 Changed mountopts check to work for blank and whitespace. Pipe emerge through
378 sed to properly strip out junk.
379
380 2 Apr 2005; Preston Cody <codeman@gentoo.org>
381 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
382 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
383
384 31 Mar 2005; Preston Cody <codeman@gentoo.org>
385 Fixed indent problem in GLICController
386
387 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
388 Check for disklabel type "loop" and use the device name without a minor.
389
390 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
391 Remove /tmp/compile_output.log and /var/log/install.log when install is
392 complete. Added code to (hopefully) keep 2nd thread running after install.
393 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
394 get_eth_info() function. Remove most of content in amd64ArchTemplate and
395 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
396
397 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
398 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
399 when unpacking tarball.
400
401 28 Mar 2005; Preston Cody <codeman@gentoo.org>
402 rewrote filesystem_tools. looks like it works so ripping out all the old
403 filesystem_tools code.
404
405 26 Mar 2005; Preston Cody <codeman@gentoo.org>
406 Changed the print statements to logging in the partitioning BE code.
407 the logger may need to be imported to the x86archtemplate. unknown yet.
408 Added the finishing_cleanup function.
409 added a fix to the logger from BenUrban
410
411 25 Mar 2005; Preston Cody <codeman@gentoo.org>
412 changed InstallProfile to remove is_uri check on kernel, stage, and portage
413 URIs. The blank uri check has been commented out.
414 ripped out error checking of set_services. this is done by _add_to_runlevel.
415
416 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
417 set_stage_tarball_uri() doesn't raise an exception on a blank string.
418
419 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
420 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
421 the install profile if available. Commented out spawn() debugging prints
422
423 23 Mar 2005; Preston Cody <codeman@gentoo.org>
424 small changes to setup_network_post. moved adding to runlevel of net.x to
425 after the device gets symlinked. added domainname runlevel command.
426
427 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
428 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
429 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
430 spawn() call in livecd-kernel code to pass environment variables.
431 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
432 the install profile if available.
433
434 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
435 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
436 to handle installing the livecd kernel into the new system.
437
438 22 Mar 2005; Preston Cody <codeman@gentoo.org>
439 should emerge hotplug and coldplug before adding them to runlevel.
440
441 21 Mar 2005; Preston Cody <codeman@gentoo.org>
442 took chroot out of grub_install command.
443
444 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
445 Changed chroot wrapper code in spawn() to write the wrapper the python way
446 instead of the bash way to avoid quote conflicts. Added
447 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
448 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
449 as it breaks the piping.
450
451 20 Mar 2005; Preston Cody <codeman@gentoo.org>
452 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
453
454 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
455 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
456 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
457 GLIInstallProfile.
458
459 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
460 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
461 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
462 into /mnt/gentoo in prepare_chroot()
463
464 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
465 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
466 retarted behavior regarding threads and signals. Add code to convert MB/%/*
467 to start/end sectors
468
469 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
470 Add 2>&1 to cmd in spawn()
471
472 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
473 Modified GLIUtility.exitsuccess() to work with return value from
474 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
475 creates wrapper script for commands run inside chroot so multiple commands
476 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
477 for the generated script from spawn()
478
479 16 Mar 2005; Preston Cody <codeman@gentoo.org>
480 Removed default values for stage tarball URI and portage tree URI from
481 InstallProfile. These should be set by the FEs. also added services step to
482 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
483 Possibly fixed CC DHCP bug with -n. (thx agaffney)
484
485 14 Mar 2005; Preston Cody <codeman@gentoo.org>
486 Small fix for setting the default gateway. Also added feature to dialogfe.
487
488 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
489 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
490
491 1 Mar 2005; Preston Cody <codeman@gentoo.org>
492 Fixed a bunch of true -> True typos. lots of em
493 only write new resolv.conf if there are dns servers listed.
494
495 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
496 Commented out 'display_on_tty8=True' in start_portmap()
497
498 18 Feb 2005; Preston Cody <codeman@gentoo.org>
499 added progress bar to dialogfe and fix logger bug in ArchTemplate.
500
501 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
502 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
503 lang parameter to __init__()
504
505 10 Feb 2005; Preston Cody <codeman@gentoo.org>
506 updates to TODO list.
507
508 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
509 Initial code for quickpkg GRP support. Fix loop to grab packages from
510 'emerge -p blah'
511
512 6 Feb 2005; Preston Cody <codeman@gentoo.org>
513 check for dhcp in the network stuff and emerge it if it is.
514 added quickpkg to TODO list
515
516 5 Feb 2005; Preston Cody <codeman@gentoo.org>
517 Changed the raising of 'warning' exceptions to a simple log of the error
518 so that the installer can continue.
519
520 3 Feb 2005; Preston Cody <codeman@gentoo.org>
521 Some big changes. First, changed most output to display_on_tty8.
522 Second, added log lines to all templates. Some smaller fixes such as typos.
523 Also did some cleanups of old commented lines.
524
525 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
526 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
527 Undo change with fix. Escaping fix in GLIStorageDevice.py
528
529 31 Jan 2005; Preston Cody <codeman@gentoo.org>
530 more updates to TODO list. hopefully we'll soon start removing items instead
531 of adding them.
532
533 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
534 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
535
536 27 Jan 2005; Preston Cody <codeman@gentoo.org>
537 updated TODO list. (again)
538
539 25 Jan 2005; Preston Cody <codeman@gentoo.org>
540 changed output of portmap start to display_on_tty8.
541 fixed bootloader for udev and multiple kernels
542 fixed custom kernel config (again)
543
544 22 Jan 2005; Preston Cody <codeman@gentoo.org>
545 changed default value of CC._enable_ssh to True because this is smart.
546 added code to allow custom kernel .config. may be unstable and break. sorry.
547
548 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
549 partition() now waits until after it checks for partition flags before delete
550 the partitions :P
551
552 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
553 Updated TODO. swapon failure it temporarily not an error. swapon is an error
554 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
555 blank.
556
557 19 Jan 2005; Preston Cody <codeman@gentoo.org>
558 Various fixes related to the add_users function. Still not yet finished.
559 Added things to the TODO list. Lets start using that!
560
561 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
562 Added code to x86Template to format newly created partitions. Also added
563 some error checking code. GLIStorageDevice passes 'minor' with data to
564 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
565 mounting code.
566
567 18 Jan 2005; Preston Cody <codeman@gentoo.org>
568 Took out unnecessary setting of random livecd root password. the cd already
569 sets it randomly.
570
571 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
572 Took out an unneeded step from CC's run()
573
574 15 Jan 2005; Preston Cody <codeman@gentoo.org>
575 Attempt at detecting and adding windows partitions to lilo.
576
577 14 Jan 2005; Preston Cody <codeman@gentoo.org>
578 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
579 partition. fixed misc exit_status => exitstatus typo.
580
581 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
582 Added basic code for resizing filesystems with pyparted. Fixed code for
583 resizing ntfs and ext2/3.
584
585 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
586 Fixed partition() in x86Template so that it scans through logicals and deletes
587 before deleting containing extended partition. Also clears partition table to
588 be safe before third pass.
589
590 08 Jan 2005; Preston Cody <codeman@gentoo.org>
591 Added mount_network_shares. not able to test it from this computer.
592 will test when i get back to school.
593 also added start_portmap to the client_controller as an always-do.
594 agaffney says this is needed for NFS mounts to work.
595
596 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
597 Partial rewrite of partitioning code in x86Template. No longer shells out to
598 parted to perform actions, now uses all pyparted calls. Code "works" in a
599 test, but still needs lots of TLC. Also modified tests/install.py to work
600 with x86Template and GLIClientConfiguration.
601
602 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
603 Initial move of partitioning code from ArchTemplate to x86Template.
604
605 07 Jan 2005; Preston Cody <codeman@gentoo.org>
606 Added grp_install and services to InstallProfile. forgot about the set_root_password
607
608 07 Jan 2005; Preston Cody <codeman@gentoo.org>
609 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
610 Test Install ran very well (skipping partitioning).
611
612 05 Jan 2005; Preston Cody <codeman@gentoo.org>
613 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
614 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
615 some may still have eluded me.
616
617 05 Jan 2005; Preston Cody <codeman@gentoo.org>
618 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
619 Just finished mount_local_partitions in GLIArchitectureTemplate
620
621 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
622 Added get_num_sectors() to GLIStorageDevice.
623
624 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
625 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
626 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
627 from GLIInstallProfile.
628
629 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
630 GLIStorageDevice returns "unknown" instead of "" for get_type()
631
632 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
633 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
634 actually work. Commented out resizability checking code for speed.
635
636 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
637 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
638 GLIStorageDevice at the suggestion of plors
639
640 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
641 Added a function to GLIUtility to pull a value from a make.conf-style config
642 file. Minor type fix to GLIInstallProfile.py
643
644 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
645 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
646 network mounts from partition data structure in GLIInstallProfile
647
648 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
649 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
650 can be resized.
651
652 27 Oct 2004; Preston Cody <codeman@gentoo.org>
653 Added some of the final functions to GLIInstallTemplate.
654 Yes this project is still active despite rare use of the Changelog!
655
656 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
657 Added the GLIPartitionTools.py file. This is a temporary insertion of
658 partitioning tools that will eventually go into their own package.
659
660 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
661 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
662 for the program). Added __init__(install_profile, client_configuration) to
663 GLI.InstallProfile. This sets install_profile and client_configuration once so as
664 to avoid constantly passing stuff every time we call a method.
665
666 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
667
668 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
669 files without messing up all the other stuff in them. This will be used for making
670 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
671
672 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
673
674 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
675 have a few basic things. I added two private methods. One is _depends(). This
676 will be used for dependency checking (ie. unpacking a tarball requires that
677 partitioning has been done). The other is _exec_in_chroot(). This is the exact
678 same syntax as os.system(), however, instead of being run in the liveCD
679 environment, it runs in the chroot. This requires a bit of fork() magic, so I
680 isolated the code. Hope to work more this week to get this class formed...
681
682 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
683
684 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
685 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
686 to allow for easier modification (mutable, rather than immutable objects). Updated
687 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
688 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
689 Added initial unit test code.
690
691 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
692
693 Added initial changelog. Setting up the basic structure of the CVS repository
694 for the project. Added the UML class diagram in docs. Added a skeletal GLI
695 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20