/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 703 - (show annotations) (download)
Tue Jun 21 18:53:53 2005 UTC (9 years, 6 months ago) by agaffney
File size: 31600 byte(s)
setup_network_post() writes custom DHCP options to /etc/conf.d/net

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.256 2005/06/21 18:53:53 agaffney Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
8 Apply spawn() patch from #96644 (with minor changes). Make sure the return
9 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
10 small error with <pipe>.close() returning None. Fix space vs. tab issue.
11 Fix undefined variable 'output' issue in spawn(). Changed setup_network_post
12 to check for 'interfaces[interface][0] != "dhcp"' instead of
13 'interfaces[interface][1]' since DHCP uses that field for its options.
14 setup_network_post() writes custom DHCP options to /etc/conf.d/net.
15
16 20 Jun 2005; Preston Cody <codeman@gentoo.org>
17 More updates to GenDialog and gli-d.
18
19 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
20 Modify list_mirrors() to return a list of mirror URL/name pairs.
21
22 19 Jun 2005; Preston Cody <codeman@gentoo.org>
23 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
24 get subarch.
25
26 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
27 Backend partitioning will create disklabel is none exists. Installprofile
28 defaults to "" now instead of "msdos" for disklabel type. Fix for
29 mount_local_partitions() to remember device along with minor in the
30 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
31 add else block to log unsupported netmount types to mount_network_shares()
32
33 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
34 src/GLIArchitectureTemplate.py:
35 Refactor kernel_compile common stuff, fix 2.4 build process.
36 src/fe/cli/clife.py:
37 Logging system.
38 src/GLIUtility.py, src/GLIStorageDevice.py:
39 Add comments about re-writes needed for boxes without sysfs.
40
41 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
42 src/GLIArchitectureTemplate.py:
43 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
44 'make dep' call for custom compile. build_mode support for prepare-only and
45 none types completed. custom compile function chains shell functions in
46 spawned script, to allow for catching all errors.
47
48 15 Jun 2005; Preston Cody <codeman@gentoo.org>
49 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
50 and GenDialog. other gendialog updates as well. kernel updates untested.
51
52 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
53 src/GLIInstallProfile.py:
54 Change structure of etc-portage stuff. The serialization was broken before my
55 last commit, and I am the only person that's ever used it. The new schema is
56 as follows:
57 <etc-portage>
58 <file name="package.mask"/>
59 <file name="package.unmask">
60 <entry atom="sys-kernel/openmosix-sources"/>
61 </file>
62 <file name="package.use">
63 <entry atom="sys-libs/db">
64 -java
65 </entry>
66 <entry atom="dev-libs/cyrus-sasl">
67 -ldap
68 </entry>
69 </file>
70 </etc-portage>
71
72
73 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
74 src/GLIInstallProfile.py:
75 Add new entry for gli-profile/kernel-build-method item. Add missing
76 serialize_etc_portage (temporary). Make serialize_make_conf always print the
77 keys in the same order.
78
79 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
80 src/GLIArchitectureTemplate.py:
81 Clean up commenting used by _edit_config(), and fix bug where wrong comment
82 was repeatedly appended to make.conf.
83
84 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
85 src/GLIArchitectureTemplate.py:
86 Put some Linux-2.6 specific code under a if statement. Store list of
87 successfully mounted swap device for using swapoff. Add proper error checking
88 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
89 'file'. Clean up some redundant code (thanks to pychecker).'
90
91 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
92 Fix typos: get_extended() instead of get_extended_partition(). Added
93 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
94 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
95
96 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
97 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
98 in add_network_interface.
99
100 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
101 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
102 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
103 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
104 prepare_chroot.
105
106 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
107 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
108 +src/fe/installer-gtk:
109 Add new automated CLI frontend. Add scripts that are the intended means to
110 use each frontend.
111
112 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
113 src/GLIClientController.py:
114 Add null type to network config, for cases where the interface is already up
115 and should not be touched (netboot for example).
116
117 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
118 src/GLIArchitectureTemplate.py:
119 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
120 string!. Try to use binary packages if available by default.
121
122 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
123 src/GLIArchitectureTemplate.py:
124 More error checking for _add_to_runlevel, to ensure that the init script
125 actually exists before we try to add it. set_services phase must take place
126 after the package installation, otherwise the init scripts might not exist.
127 Find the correct init script for the cron and logging daemons, and add that
128 instead of the package atom.
129
130 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
131 src/GLIArchitectureTemplate.py:
132 Fix up _edit_config so that it works if the file doesn't already exist. Fix
133 usage of 'file' to 'contents' for the variable name, as it shadows
134 __builtin__.file.
135
136 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
137 src/GLIArchitectureTemplate.py:
138 Add MTA install code, and include MTA install phase. Ensure
139 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
140 for 'none' kernel config for build_kernel phase. Put kernel_script in
141 /var/tmp instead of /root for build_kernel phase.
142
143 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
144 Rename mta variables to match syslog/cron variables.
145
146 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
147 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
148 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
149 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
150 src/templates/.cvsignore, src/tests/.cvsignore:
151 Refactor partition formatting again to include error checking. Allow 'none'
152 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
153
154 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
155 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
156 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
157 only have a single spawn call.
158
159 11 Jun 2005; Preston Cody <codeman@gentoo.org>
160 refixed samyron's fix of set_architecture_template.
161
162 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
163 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
164 be executable.
165
166 10 Jun 2005; Scott Myron <samyron@gentoo.org>
167 Fixed one of the FIXME's in the ClientConfiguration. There is now some
168 error checking when you call set_architecture_template.
169
170 10 Jun 2005; Preston Cody <codeman@gentoo.org>
171 moved the mkfsopts input to the partition options menu instead of the during
172 the creation process. updated GenDialog to say it supports reiserfs v3.
173
174 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
175 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
176 Complete support for 'mkfsopts' parameter in main system and dialogfe.
177 Add support for other partition types to dialogfe.
178 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
179 avoid integer overflows and wraparounds.
180
181 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
182 Removed start/end from XML output and added mkfsopts to partitioning info.
183 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
184 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
185 in GLIClientConfiguration. Change from .1 and .9 to constants for
186 partitioning. Fix free space overwriting bug. Remove a few unused functions
187 from rewrite. Fix call to get_partition_at()
188
189 8 Jun 2005; Preston Cody <codeman@gentoo.org>
190 Updates to GenDialog and dialogfe.
191
192 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
193 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
194
195 6 Jun 2005; Preston Cody <codeman@gentoo.org>
196 more GenDialog updates to partitioning.
197
198 5 Jun 2005; Preston Cody <codeman@gentoo.org>
199 Indenting issue in GLISD/get_ordered_partition_list.
200 updates to GenDialog partitioning and added default UTC for timezone in IP.
201
202 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
203 Added GLISD.get_model()
204
205 3 Jun 2005; Preston Cody <codeman@gentoo.org>
206 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
207 More updates to GenDialog :)
208
209 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
210 Added get_interface_realname() function.
211
212 2 Jun 2005; Preston Cody <codeman@gentoo.org>
213 Added auto-save of CConfig and copying to new /root after install.
214 yet even more GenDialog updates.
215
216 1 Jun 2005; Preston Cody <codeman@gentoo.org>
217 removed print statement from GLISD. more updates to GenDialog.
218
219 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
220 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
221 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
222 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
223 places in GLIClientConfiguration.
224
225 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
226 Fix mount_local_partitions(), configure_fstab(), and
227 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
228 A few more fixes for templates/x86Archtemplate
229
230 27 May 2005; Preston Cody <codeman@gentoo.org>
231 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
232 a work in progress.
233
234 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
235 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
236 directly. GLISD can now handle data imported from XML.
237
238 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
239 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
240 handle blank (no disklabel) disks.
241
242 20 May 2005; Preston Cody <codeman@gentoo.org>
243 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
244 up, documented, and separated out serialization and grouped all sections.
245
246 19 May 2005; Preston Cody <codeman@gentoo.org>
247 Reorganization of ClientConfiguration and gutting of unused functions.
248 Removed verbose option from CC. Moved import statement in IP and CConfig up.
249
250 18 May 2005; Preston Cody <codeman@gentoo.org>
251 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
252
253 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
254 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
255 partitioning. CC serializes install profile to disk and prepare_chroot()
256 copies it into /mnt/gentoo/root
257
258 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
259 Moved URI parsing into new function parse_uri()
260
261 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
262 Added XMLParser module.
263
264 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
265 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
266 Minor fix to is_uri() regex to allow hyphens in hostname.
267
268 12 May 2005; Preston Cody <codeman@gentoo.org>
269 Updated finishing_cleanup for new unmounting method from agaffney.
270
271 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
272 Fix GLILogger to use correct time format string. Fix _edit_config() to
273 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
274 unicode support to is_realstring().
275
276 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
277 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
278 return value instead of non-zero. Add code to output a traceback to the
279 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
280 instead of --nocolor.
281
282 10 May 2005; Preston Cody <codeman@gentoo.org>
283 Added GLIGenDialog.py to make a generic class for the dialog functions that
284 can be used by both dialogfe and the netfe/be. updated both for new filename.
285 date changes. 2004->2005.
286
287 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
288 Removed 'quiet=True' from spawn() calls
289
290 10 May 2005; Preston Cody <codeman@gentoo.org>
291 Updated GLIUtility with patches from chotchki. Also added documentation
292
293 9 May 2005; Preston Cody <codeman@gentoo.org>
294 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
295 Updated _edit_config in ArchTemplate, make_config, and various other fixes
296 from bug #89683, mostly touchups.
297
298 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
299 GLIStorageDevice cleanup patch from bug #91761
300
301 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
302 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
303 _edit_config(). Error logging casts 'error' to str
304
305 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
306 Exceptions received in CC are logged before being passed to the FE. Added
307 code to CC to handle exceptions *not* thrown by the installer itself.
308
309 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
310 get_max_mb_for_resize() returns -1 if not self.resizeable
311
312 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
313 More dirty rsync hacks :-/
314
315 29 Apr 2005; Preston Cody <codeman@gentoo.org>
316 Patches from chotchki (bug #90325) to improve CC networking. untested.
317
318 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
319 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
320 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
321 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
322 GLIStorageDevice as suggested by pychecker. Fix minor bug in
323 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
324 _get_packages_to_emerge()
325
326 28 Apr 2005; Preston Cody <codeman@gentoo.org>
327 Added group-adding code to set_users in ArchTemplate
328
329 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
330 Added post-install script code
331
332 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
333 Fixed encapsulation issues in GLIClientController (bug #90141)
334
335 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
336 Update resizing code in GLIStorageDevice
337
338 17 Apr 2005; Preston Cody <codeman@gentoo.org>
339 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
340
341 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
342 Reverted change to ArchTemplate and added support for commented line in old
343 code.
344
345 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
346 Changed _edit_config() to modify value in-place instead of commenting out and
347 adding the new value to the end of the file.
348
349 15 Apr 2005; Preston Cody <codeman@gentoo.org>
350 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
351 Also updated TODO list.
352
353 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
354 Use blackace's one-liner to add comments for all function for use with
355 pythondoc.
356
357 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
358 Moved 'end >= device_sectors' check out of loop to check for next partition's
359 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
360 Partitioning code now tracks start/end of extended for placing logicals. End
361 point of logical is now adjusted along with start.
362
363 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
364 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
365 the way of partitioning from a blank disk. Add int() around access to minor
366 key in partition information due to new partition code leaving them as float.
367
368 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
369 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
370
371 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
372 Major GLIStorageDevice overhaul...all MB now instead of sectors.
373
374 8 Apr 2005; Scott Myron <samyron@gentoo.org>
375 Added support for DHCP options and MAC addresses in the InstallProfile.
376
377 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
378 Changed mountopts check to work for blank and whitespace. Pipe emerge through
379 sed to properly strip out junk.
380
381 2 Apr 2005; Preston Cody <codeman@gentoo.org>
382 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
383 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
384
385 31 Mar 2005; Preston Cody <codeman@gentoo.org>
386 Fixed indent problem in GLICController
387
388 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
389 Check for disklabel type "loop" and use the device name without a minor.
390
391 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
392 Remove /tmp/compile_output.log and /var/log/install.log when install is
393 complete. Added code to (hopefully) keep 2nd thread running after install.
394 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
395 get_eth_info() function. Remove most of content in amd64ArchTemplate and
396 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
397
398 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
399 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
400 when unpacking tarball.
401
402 28 Mar 2005; Preston Cody <codeman@gentoo.org>
403 rewrote filesystem_tools. looks like it works so ripping out all the old
404 filesystem_tools code.
405
406 26 Mar 2005; Preston Cody <codeman@gentoo.org>
407 Changed the print statements to logging in the partitioning BE code.
408 the logger may need to be imported to the x86archtemplate. unknown yet.
409 Added the finishing_cleanup function.
410 added a fix to the logger from BenUrban
411
412 25 Mar 2005; Preston Cody <codeman@gentoo.org>
413 changed InstallProfile to remove is_uri check on kernel, stage, and portage
414 URIs. The blank uri check has been commented out.
415 ripped out error checking of set_services. this is done by _add_to_runlevel.
416
417 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
418 set_stage_tarball_uri() doesn't raise an exception on a blank string.
419
420 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
421 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
422 the install profile if available. Commented out spawn() debugging prints
423
424 23 Mar 2005; Preston Cody <codeman@gentoo.org>
425 small changes to setup_network_post. moved adding to runlevel of net.x to
426 after the device gets symlinked. added domainname runlevel command.
427
428 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
429 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
430 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
431 spawn() call in livecd-kernel code to pass environment variables.
432 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
433 the install profile if available.
434
435 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
436 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
437 to handle installing the livecd kernel into the new system.
438
439 22 Mar 2005; Preston Cody <codeman@gentoo.org>
440 should emerge hotplug and coldplug before adding them to runlevel.
441
442 21 Mar 2005; Preston Cody <codeman@gentoo.org>
443 took chroot out of grub_install command.
444
445 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
446 Changed chroot wrapper code in spawn() to write the wrapper the python way
447 instead of the bash way to avoid quote conflicts. Added
448 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
449 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
450 as it breaks the piping.
451
452 20 Mar 2005; Preston Cody <codeman@gentoo.org>
453 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
454
455 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
456 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
457 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
458 GLIInstallProfile.
459
460 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
461 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
462 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
463 into /mnt/gentoo in prepare_chroot()
464
465 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
466 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
467 retarted behavior regarding threads and signals. Add code to convert MB/%/*
468 to start/end sectors
469
470 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
471 Add 2>&1 to cmd in spawn()
472
473 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
474 Modified GLIUtility.exitsuccess() to work with return value from
475 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
476 creates wrapper script for commands run inside chroot so multiple commands
477 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
478 for the generated script from spawn()
479
480 16 Mar 2005; Preston Cody <codeman@gentoo.org>
481 Removed default values for stage tarball URI and portage tree URI from
482 InstallProfile. These should be set by the FEs. also added services step to
483 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
484 Possibly fixed CC DHCP bug with -n. (thx agaffney)
485
486 14 Mar 2005; Preston Cody <codeman@gentoo.org>
487 Small fix for setting the default gateway. Also added feature to dialogfe.
488
489 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
490 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
491
492 1 Mar 2005; Preston Cody <codeman@gentoo.org>
493 Fixed a bunch of true -> True typos. lots of em
494 only write new resolv.conf if there are dns servers listed.
495
496 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
497 Commented out 'display_on_tty8=True' in start_portmap()
498
499 18 Feb 2005; Preston Cody <codeman@gentoo.org>
500 added progress bar to dialogfe and fix logger bug in ArchTemplate.
501
502 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
503 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
504 lang parameter to __init__()
505
506 10 Feb 2005; Preston Cody <codeman@gentoo.org>
507 updates to TODO list.
508
509 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
510 Initial code for quickpkg GRP support. Fix loop to grab packages from
511 'emerge -p blah'
512
513 6 Feb 2005; Preston Cody <codeman@gentoo.org>
514 check for dhcp in the network stuff and emerge it if it is.
515 added quickpkg to TODO list
516
517 5 Feb 2005; Preston Cody <codeman@gentoo.org>
518 Changed the raising of 'warning' exceptions to a simple log of the error
519 so that the installer can continue.
520
521 3 Feb 2005; Preston Cody <codeman@gentoo.org>
522 Some big changes. First, changed most output to display_on_tty8.
523 Second, added log lines to all templates. Some smaller fixes such as typos.
524 Also did some cleanups of old commented lines.
525
526 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
527 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
528 Undo change with fix. Escaping fix in GLIStorageDevice.py
529
530 31 Jan 2005; Preston Cody <codeman@gentoo.org>
531 more updates to TODO list. hopefully we'll soon start removing items instead
532 of adding them.
533
534 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
535 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
536
537 27 Jan 2005; Preston Cody <codeman@gentoo.org>
538 updated TODO list. (again)
539
540 25 Jan 2005; Preston Cody <codeman@gentoo.org>
541 changed output of portmap start to display_on_tty8.
542 fixed bootloader for udev and multiple kernels
543 fixed custom kernel config (again)
544
545 22 Jan 2005; Preston Cody <codeman@gentoo.org>
546 changed default value of CC._enable_ssh to True because this is smart.
547 added code to allow custom kernel .config. may be unstable and break. sorry.
548
549 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
550 partition() now waits until after it checks for partition flags before delete
551 the partitions :P
552
553 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
554 Updated TODO. swapon failure it temporarily not an error. swapon is an error
555 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
556 blank.
557
558 19 Jan 2005; Preston Cody <codeman@gentoo.org>
559 Various fixes related to the add_users function. Still not yet finished.
560 Added things to the TODO list. Lets start using that!
561
562 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
563 Added code to x86Template to format newly created partitions. Also added
564 some error checking code. GLIStorageDevice passes 'minor' with data to
565 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
566 mounting code.
567
568 18 Jan 2005; Preston Cody <codeman@gentoo.org>
569 Took out unnecessary setting of random livecd root password. the cd already
570 sets it randomly.
571
572 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
573 Took out an unneeded step from CC's run()
574
575 15 Jan 2005; Preston Cody <codeman@gentoo.org>
576 Attempt at detecting and adding windows partitions to lilo.
577
578 14 Jan 2005; Preston Cody <codeman@gentoo.org>
579 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
580 partition. fixed misc exit_status => exitstatus typo.
581
582 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
583 Added basic code for resizing filesystems with pyparted. Fixed code for
584 resizing ntfs and ext2/3.
585
586 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
587 Fixed partition() in x86Template so that it scans through logicals and deletes
588 before deleting containing extended partition. Also clears partition table to
589 be safe before third pass.
590
591 08 Jan 2005; Preston Cody <codeman@gentoo.org>
592 Added mount_network_shares. not able to test it from this computer.
593 will test when i get back to school.
594 also added start_portmap to the client_controller as an always-do.
595 agaffney says this is needed for NFS mounts to work.
596
597 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
598 Partial rewrite of partitioning code in x86Template. No longer shells out to
599 parted to perform actions, now uses all pyparted calls. Code "works" in a
600 test, but still needs lots of TLC. Also modified tests/install.py to work
601 with x86Template and GLIClientConfiguration.
602
603 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
604 Initial move of partitioning code from ArchTemplate to x86Template.
605
606 07 Jan 2005; Preston Cody <codeman@gentoo.org>
607 Added grp_install and services to InstallProfile. forgot about the set_root_password
608
609 07 Jan 2005; Preston Cody <codeman@gentoo.org>
610 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
611 Test Install ran very well (skipping partitioning).
612
613 05 Jan 2005; Preston Cody <codeman@gentoo.org>
614 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
615 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
616 some may still have eluded me.
617
618 05 Jan 2005; Preston Cody <codeman@gentoo.org>
619 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
620 Just finished mount_local_partitions in GLIArchitectureTemplate
621
622 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
623 Added get_num_sectors() to GLIStorageDevice.
624
625 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
626 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
627 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
628 from GLIInstallProfile.
629
630 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
631 GLIStorageDevice returns "unknown" instead of "" for get_type()
632
633 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
634 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
635 actually work. Commented out resizability checking code for speed.
636
637 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
638 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
639 GLIStorageDevice at the suggestion of plors
640
641 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
642 Added a function to GLIUtility to pull a value from a make.conf-style config
643 file. Minor type fix to GLIInstallProfile.py
644
645 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
646 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
647 network mounts from partition data structure in GLIInstallProfile
648
649 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
650 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
651 can be resized.
652
653 27 Oct 2004; Preston Cody <codeman@gentoo.org>
654 Added some of the final functions to GLIInstallTemplate.
655 Yes this project is still active despite rare use of the Changelog!
656
657 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
658 Added the GLIPartitionTools.py file. This is a temporary insertion of
659 partitioning tools that will eventually go into their own package.
660
661 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
662 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
663 for the program). Added __init__(install_profile, client_configuration) to
664 GLI.InstallProfile. This sets install_profile and client_configuration once so as
665 to avoid constantly passing stuff every time we call a method.
666
667 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
668
669 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
670 files without messing up all the other stuff in them. This will be used for making
671 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
672
673 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
674
675 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
676 have a few basic things. I added two private methods. One is _depends(). This
677 will be used for dependency checking (ie. unpacking a tarball requires that
678 partitioning has been done). The other is _exec_in_chroot(). This is the exact
679 same syntax as os.system(), however, instead of being run in the liveCD
680 environment, it runs in the chroot. This requires a bit of fork() magic, so I
681 isolated the code. Hope to work more this week to get this class formed...
682
683 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
684
685 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
686 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
687 to allow for easier modification (mutable, rather than immutable objects). Updated
688 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
689 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
690 Added initial unit test code.
691
692 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
693
694 Added initial changelog. Setting up the basic structure of the CVS repository
695 for the project. Added the UML class diagram in docs. Added a skeletal GLI
696 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20