/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 707 - (show annotations) (download)
Fri Jun 24 21:51:26 2005 UTC (9 years, 3 months ago) by codeman
File size: 32035 byte(s)
  Add dhcp_options to the CC, CConfig, and GenDialog.  More overall changes to
  GenDialog as it gets closer to completion.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.259 2005/06/24 21:51:26 codeman Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 24 Jun 2005; Preston Cody <codeman@gentoo.org>
8 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
9 GenDialog as it gets closer to completion.
10
11 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
12 Modify get_eth_info() to take a full interface name (eth0 fex). float()
13 instead of int() in add_partition_device_partition() for minor (closes 96804)
14
15 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
16 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
17 instead of 'interfaces[interface][1]' since DHCP uses that field for its
18 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
19
20 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
21 Apply spawn() patch from #96644 (with minor changes). Make sure the return
22 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
23 small error with <pipe>.close() returning None. Fix space vs. tab issue.
24 Fix undefined variable 'output' issue in spawn().
25
26 20 Jun 2005; Preston Cody <codeman@gentoo.org>
27 More updates to GenDialog and gli-d.
28
29 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
30 Modify list_mirrors() to return a list of mirror URL/name pairs.
31
32 19 Jun 2005; Preston Cody <codeman@gentoo.org>
33 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
34 get subarch.
35
36 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
37 Backend partitioning will create disklabel is none exists. Installprofile
38 defaults to "" now instead of "msdos" for disklabel type. Fix for
39 mount_local_partitions() to remember device along with minor in the
40 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
41 add else block to log unsupported netmount types to mount_network_shares()
42
43 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
44 src/GLIArchitectureTemplate.py:
45 Refactor kernel_compile common stuff, fix 2.4 build process.
46 src/fe/cli/clife.py:
47 Logging system.
48 src/GLIUtility.py, src/GLIStorageDevice.py:
49 Add comments about re-writes needed for boxes without sysfs.
50
51 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
52 src/GLIArchitectureTemplate.py:
53 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
54 'make dep' call for custom compile. build_mode support for prepare-only and
55 none types completed. custom compile function chains shell functions in
56 spawned script, to allow for catching all errors.
57
58 15 Jun 2005; Preston Cody <codeman@gentoo.org>
59 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
60 and GenDialog. other gendialog updates as well. kernel updates untested.
61
62 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
63 src/GLIInstallProfile.py:
64 Change structure of etc-portage stuff. The serialization was broken before my
65 last commit, and I am the only person that's ever used it. The new schema is
66 as follows:
67 <etc-portage>
68 <file name="package.mask"/>
69 <file name="package.unmask">
70 <entry atom="sys-kernel/openmosix-sources"/>
71 </file>
72 <file name="package.use">
73 <entry atom="sys-libs/db">
74 -java
75 </entry>
76 <entry atom="dev-libs/cyrus-sasl">
77 -ldap
78 </entry>
79 </file>
80 </etc-portage>
81
82
83 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
84 src/GLIInstallProfile.py:
85 Add new entry for gli-profile/kernel-build-method item. Add missing
86 serialize_etc_portage (temporary). Make serialize_make_conf always print the
87 keys in the same order.
88
89 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
90 src/GLIArchitectureTemplate.py:
91 Clean up commenting used by _edit_config(), and fix bug where wrong comment
92 was repeatedly appended to make.conf.
93
94 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
95 src/GLIArchitectureTemplate.py:
96 Put some Linux-2.6 specific code under a if statement. Store list of
97 successfully mounted swap device for using swapoff. Add proper error checking
98 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
99 'file'. Clean up some redundant code (thanks to pychecker).'
100
101 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
102 Fix typos: get_extended() instead of get_extended_partition(). Added
103 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
104 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
105
106 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
107 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
108 in add_network_interface.
109
110 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
111 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
112 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
113 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
114 prepare_chroot.
115
116 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
117 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
118 +src/fe/installer-gtk:
119 Add new automated CLI frontend. Add scripts that are the intended means to
120 use each frontend.
121
122 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
123 src/GLIClientController.py:
124 Add null type to network config, for cases where the interface is already up
125 and should not be touched (netboot for example).
126
127 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
128 src/GLIArchitectureTemplate.py:
129 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
130 string!. Try to use binary packages if available by default.
131
132 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
133 src/GLIArchitectureTemplate.py:
134 More error checking for _add_to_runlevel, to ensure that the init script
135 actually exists before we try to add it. set_services phase must take place
136 after the package installation, otherwise the init scripts might not exist.
137 Find the correct init script for the cron and logging daemons, and add that
138 instead of the package atom.
139
140 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
141 src/GLIArchitectureTemplate.py:
142 Fix up _edit_config so that it works if the file doesn't already exist. Fix
143 usage of 'file' to 'contents' for the variable name, as it shadows
144 __builtin__.file.
145
146 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
147 src/GLIArchitectureTemplate.py:
148 Add MTA install code, and include MTA install phase. Ensure
149 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
150 for 'none' kernel config for build_kernel phase. Put kernel_script in
151 /var/tmp instead of /root for build_kernel phase.
152
153 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
154 Rename mta variables to match syslog/cron variables.
155
156 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
157 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
158 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
159 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
160 src/templates/.cvsignore, src/tests/.cvsignore:
161 Refactor partition formatting again to include error checking. Allow 'none'
162 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
163
164 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
165 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
166 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
167 only have a single spawn call.
168
169 11 Jun 2005; Preston Cody <codeman@gentoo.org>
170 refixed samyron's fix of set_architecture_template.
171
172 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
173 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
174 be executable.
175
176 10 Jun 2005; Scott Myron <samyron@gentoo.org>
177 Fixed one of the FIXME's in the ClientConfiguration. There is now some
178 error checking when you call set_architecture_template.
179
180 10 Jun 2005; Preston Cody <codeman@gentoo.org>
181 moved the mkfsopts input to the partition options menu instead of the during
182 the creation process. updated GenDialog to say it supports reiserfs v3.
183
184 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
185 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
186 Complete support for 'mkfsopts' parameter in main system and dialogfe.
187 Add support for other partition types to dialogfe.
188 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
189 avoid integer overflows and wraparounds.
190
191 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
192 Removed start/end from XML output and added mkfsopts to partitioning info.
193 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
194 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
195 in GLIClientConfiguration. Change from .1 and .9 to constants for
196 partitioning. Fix free space overwriting bug. Remove a few unused functions
197 from rewrite. Fix call to get_partition_at()
198
199 8 Jun 2005; Preston Cody <codeman@gentoo.org>
200 Updates to GenDialog and dialogfe.
201
202 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
203 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
204
205 6 Jun 2005; Preston Cody <codeman@gentoo.org>
206 more GenDialog updates to partitioning.
207
208 5 Jun 2005; Preston Cody <codeman@gentoo.org>
209 Indenting issue in GLISD/get_ordered_partition_list.
210 updates to GenDialog partitioning and added default UTC for timezone in IP.
211
212 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
213 Added GLISD.get_model()
214
215 3 Jun 2005; Preston Cody <codeman@gentoo.org>
216 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
217 More updates to GenDialog :)
218
219 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
220 Added get_interface_realname() function.
221
222 2 Jun 2005; Preston Cody <codeman@gentoo.org>
223 Added auto-save of CConfig and copying to new /root after install.
224 yet even more GenDialog updates.
225
226 1 Jun 2005; Preston Cody <codeman@gentoo.org>
227 removed print statement from GLISD. more updates to GenDialog.
228
229 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
230 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
231 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
232 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
233 places in GLIClientConfiguration.
234
235 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
236 Fix mount_local_partitions(), configure_fstab(), and
237 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
238 A few more fixes for templates/x86Archtemplate
239
240 27 May 2005; Preston Cody <codeman@gentoo.org>
241 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
242 a work in progress.
243
244 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
245 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
246 directly. GLISD can now handle data imported from XML.
247
248 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
249 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
250 handle blank (no disklabel) disks.
251
252 20 May 2005; Preston Cody <codeman@gentoo.org>
253 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
254 up, documented, and separated out serialization and grouped all sections.
255
256 19 May 2005; Preston Cody <codeman@gentoo.org>
257 Reorganization of ClientConfiguration and gutting of unused functions.
258 Removed verbose option from CC. Moved import statement in IP and CConfig up.
259
260 18 May 2005; Preston Cody <codeman@gentoo.org>
261 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
262
263 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
264 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
265 partitioning. CC serializes install profile to disk and prepare_chroot()
266 copies it into /mnt/gentoo/root
267
268 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
269 Moved URI parsing into new function parse_uri()
270
271 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
272 Added XMLParser module.
273
274 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
275 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
276 Minor fix to is_uri() regex to allow hyphens in hostname.
277
278 12 May 2005; Preston Cody <codeman@gentoo.org>
279 Updated finishing_cleanup for new unmounting method from agaffney.
280
281 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
282 Fix GLILogger to use correct time format string. Fix _edit_config() to
283 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
284 unicode support to is_realstring().
285
286 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
287 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
288 return value instead of non-zero. Add code to output a traceback to the
289 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
290 instead of --nocolor.
291
292 10 May 2005; Preston Cody <codeman@gentoo.org>
293 Added GLIGenDialog.py to make a generic class for the dialog functions that
294 can be used by both dialogfe and the netfe/be. updated both for new filename.
295 date changes. 2004->2005.
296
297 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
298 Removed 'quiet=True' from spawn() calls
299
300 10 May 2005; Preston Cody <codeman@gentoo.org>
301 Updated GLIUtility with patches from chotchki. Also added documentation
302
303 9 May 2005; Preston Cody <codeman@gentoo.org>
304 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
305 Updated _edit_config in ArchTemplate, make_config, and various other fixes
306 from bug #89683, mostly touchups.
307
308 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
309 GLIStorageDevice cleanup patch from bug #91761
310
311 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
312 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
313 _edit_config(). Error logging casts 'error' to str
314
315 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
316 Exceptions received in CC are logged before being passed to the FE. Added
317 code to CC to handle exceptions *not* thrown by the installer itself.
318
319 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
320 get_max_mb_for_resize() returns -1 if not self.resizeable
321
322 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
323 More dirty rsync hacks :-/
324
325 29 Apr 2005; Preston Cody <codeman@gentoo.org>
326 Patches from chotchki (bug #90325) to improve CC networking. untested.
327
328 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
329 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
330 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
331 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
332 GLIStorageDevice as suggested by pychecker. Fix minor bug in
333 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
334 _get_packages_to_emerge()
335
336 28 Apr 2005; Preston Cody <codeman@gentoo.org>
337 Added group-adding code to set_users in ArchTemplate
338
339 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
340 Added post-install script code
341
342 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
343 Fixed encapsulation issues in GLIClientController (bug #90141)
344
345 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
346 Update resizing code in GLIStorageDevice
347
348 17 Apr 2005; Preston Cody <codeman@gentoo.org>
349 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
350
351 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
352 Reverted change to ArchTemplate and added support for commented line in old
353 code.
354
355 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
356 Changed _edit_config() to modify value in-place instead of commenting out and
357 adding the new value to the end of the file.
358
359 15 Apr 2005; Preston Cody <codeman@gentoo.org>
360 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
361 Also updated TODO list.
362
363 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
364 Use blackace's one-liner to add comments for all function for use with
365 pythondoc.
366
367 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
368 Moved 'end >= device_sectors' check out of loop to check for next partition's
369 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
370 Partitioning code now tracks start/end of extended for placing logicals. End
371 point of logical is now adjusted along with start.
372
373 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
374 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
375 the way of partitioning from a blank disk. Add int() around access to minor
376 key in partition information due to new partition code leaving them as float.
377
378 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
379 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
380
381 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
382 Major GLIStorageDevice overhaul...all MB now instead of sectors.
383
384 8 Apr 2005; Scott Myron <samyron@gentoo.org>
385 Added support for DHCP options and MAC addresses in the InstallProfile.
386
387 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
388 Changed mountopts check to work for blank and whitespace. Pipe emerge through
389 sed to properly strip out junk.
390
391 2 Apr 2005; Preston Cody <codeman@gentoo.org>
392 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
393 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
394
395 31 Mar 2005; Preston Cody <codeman@gentoo.org>
396 Fixed indent problem in GLICController
397
398 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
399 Check for disklabel type "loop" and use the device name without a minor.
400
401 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
402 Remove /tmp/compile_output.log and /var/log/install.log when install is
403 complete. Added code to (hopefully) keep 2nd thread running after install.
404 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
405 get_eth_info() function. Remove most of content in amd64ArchTemplate and
406 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
407
408 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
409 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
410 when unpacking tarball.
411
412 28 Mar 2005; Preston Cody <codeman@gentoo.org>
413 rewrote filesystem_tools. looks like it works so ripping out all the old
414 filesystem_tools code.
415
416 26 Mar 2005; Preston Cody <codeman@gentoo.org>
417 Changed the print statements to logging in the partitioning BE code.
418 the logger may need to be imported to the x86archtemplate. unknown yet.
419 Added the finishing_cleanup function.
420 added a fix to the logger from BenUrban
421
422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
423 changed InstallProfile to remove is_uri check on kernel, stage, and portage
424 URIs. The blank uri check has been commented out.
425 ripped out error checking of set_services. this is done by _add_to_runlevel.
426
427 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
428 set_stage_tarball_uri() doesn't raise an exception on a blank string.
429
430 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
431 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
432 the install profile if available. Commented out spawn() debugging prints
433
434 23 Mar 2005; Preston Cody <codeman@gentoo.org>
435 small changes to setup_network_post. moved adding to runlevel of net.x to
436 after the device gets symlinked. added domainname runlevel command.
437
438 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
439 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
440 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
441 spawn() call in livecd-kernel code to pass environment variables.
442 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
443 the install profile if available.
444
445 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
446 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
447 to handle installing the livecd kernel into the new system.
448
449 22 Mar 2005; Preston Cody <codeman@gentoo.org>
450 should emerge hotplug and coldplug before adding them to runlevel.
451
452 21 Mar 2005; Preston Cody <codeman@gentoo.org>
453 took chroot out of grub_install command.
454
455 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
456 Changed chroot wrapper code in spawn() to write the wrapper the python way
457 instead of the bash way to avoid quote conflicts. Added
458 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
459 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
460 as it breaks the piping.
461
462 20 Mar 2005; Preston Cody <codeman@gentoo.org>
463 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
464
465 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
466 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
467 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
468 GLIInstallProfile.
469
470 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
471 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
472 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
473 into /mnt/gentoo in prepare_chroot()
474
475 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
476 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
477 retarted behavior regarding threads and signals. Add code to convert MB/%/*
478 to start/end sectors
479
480 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
481 Add 2>&1 to cmd in spawn()
482
483 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
484 Modified GLIUtility.exitsuccess() to work with return value from
485 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
486 creates wrapper script for commands run inside chroot so multiple commands
487 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
488 for the generated script from spawn()
489
490 16 Mar 2005; Preston Cody <codeman@gentoo.org>
491 Removed default values for stage tarball URI and portage tree URI from
492 InstallProfile. These should be set by the FEs. also added services step to
493 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
494 Possibly fixed CC DHCP bug with -n. (thx agaffney)
495
496 14 Mar 2005; Preston Cody <codeman@gentoo.org>
497 Small fix for setting the default gateway. Also added feature to dialogfe.
498
499 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
500 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
501
502 1 Mar 2005; Preston Cody <codeman@gentoo.org>
503 Fixed a bunch of true -> True typos. lots of em
504 only write new resolv.conf if there are dns servers listed.
505
506 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
507 Commented out 'display_on_tty8=True' in start_portmap()
508
509 18 Feb 2005; Preston Cody <codeman@gentoo.org>
510 added progress bar to dialogfe and fix logger bug in ArchTemplate.
511
512 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
513 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
514 lang parameter to __init__()
515
516 10 Feb 2005; Preston Cody <codeman@gentoo.org>
517 updates to TODO list.
518
519 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
520 Initial code for quickpkg GRP support. Fix loop to grab packages from
521 'emerge -p blah'
522
523 6 Feb 2005; Preston Cody <codeman@gentoo.org>
524 check for dhcp in the network stuff and emerge it if it is.
525 added quickpkg to TODO list
526
527 5 Feb 2005; Preston Cody <codeman@gentoo.org>
528 Changed the raising of 'warning' exceptions to a simple log of the error
529 so that the installer can continue.
530
531 3 Feb 2005; Preston Cody <codeman@gentoo.org>
532 Some big changes. First, changed most output to display_on_tty8.
533 Second, added log lines to all templates. Some smaller fixes such as typos.
534 Also did some cleanups of old commented lines.
535
536 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
537 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
538 Undo change with fix. Escaping fix in GLIStorageDevice.py
539
540 31 Jan 2005; Preston Cody <codeman@gentoo.org>
541 more updates to TODO list. hopefully we'll soon start removing items instead
542 of adding them.
543
544 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
545 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
546
547 27 Jan 2005; Preston Cody <codeman@gentoo.org>
548 updated TODO list. (again)
549
550 25 Jan 2005; Preston Cody <codeman@gentoo.org>
551 changed output of portmap start to display_on_tty8.
552 fixed bootloader for udev and multiple kernels
553 fixed custom kernel config (again)
554
555 22 Jan 2005; Preston Cody <codeman@gentoo.org>
556 changed default value of CC._enable_ssh to True because this is smart.
557 added code to allow custom kernel .config. may be unstable and break. sorry.
558
559 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
560 partition() now waits until after it checks for partition flags before delete
561 the partitions :P
562
563 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
564 Updated TODO. swapon failure it temporarily not an error. swapon is an error
565 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
566 blank.
567
568 19 Jan 2005; Preston Cody <codeman@gentoo.org>
569 Various fixes related to the add_users function. Still not yet finished.
570 Added things to the TODO list. Lets start using that!
571
572 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
573 Added code to x86Template to format newly created partitions. Also added
574 some error checking code. GLIStorageDevice passes 'minor' with data to
575 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
576 mounting code.
577
578 18 Jan 2005; Preston Cody <codeman@gentoo.org>
579 Took out unnecessary setting of random livecd root password. the cd already
580 sets it randomly.
581
582 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
583 Took out an unneeded step from CC's run()
584
585 15 Jan 2005; Preston Cody <codeman@gentoo.org>
586 Attempt at detecting and adding windows partitions to lilo.
587
588 14 Jan 2005; Preston Cody <codeman@gentoo.org>
589 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
590 partition. fixed misc exit_status => exitstatus typo.
591
592 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
593 Added basic code for resizing filesystems with pyparted. Fixed code for
594 resizing ntfs and ext2/3.
595
596 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
597 Fixed partition() in x86Template so that it scans through logicals and deletes
598 before deleting containing extended partition. Also clears partition table to
599 be safe before third pass.
600
601 08 Jan 2005; Preston Cody <codeman@gentoo.org>
602 Added mount_network_shares. not able to test it from this computer.
603 will test when i get back to school.
604 also added start_portmap to the client_controller as an always-do.
605 agaffney says this is needed for NFS mounts to work.
606
607 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
608 Partial rewrite of partitioning code in x86Template. No longer shells out to
609 parted to perform actions, now uses all pyparted calls. Code "works" in a
610 test, but still needs lots of TLC. Also modified tests/install.py to work
611 with x86Template and GLIClientConfiguration.
612
613 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
614 Initial move of partitioning code from ArchTemplate to x86Template.
615
616 07 Jan 2005; Preston Cody <codeman@gentoo.org>
617 Added grp_install and services to InstallProfile. forgot about the set_root_password
618
619 07 Jan 2005; Preston Cody <codeman@gentoo.org>
620 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
621 Test Install ran very well (skipping partitioning).
622
623 05 Jan 2005; Preston Cody <codeman@gentoo.org>
624 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
625 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
626 some may still have eluded me.
627
628 05 Jan 2005; Preston Cody <codeman@gentoo.org>
629 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
630 Just finished mount_local_partitions in GLIArchitectureTemplate
631
632 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
633 Added get_num_sectors() to GLIStorageDevice.
634
635 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
636 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
637 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
638 from GLIInstallProfile.
639
640 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
641 GLIStorageDevice returns "unknown" instead of "" for get_type()
642
643 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
644 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
645 actually work. Commented out resizability checking code for speed.
646
647 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
648 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
649 GLIStorageDevice at the suggestion of plors
650
651 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
652 Added a function to GLIUtility to pull a value from a make.conf-style config
653 file. Minor type fix to GLIInstallProfile.py
654
655 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
656 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
657 network mounts from partition data structure in GLIInstallProfile
658
659 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
660 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
661 can be resized.
662
663 27 Oct 2004; Preston Cody <codeman@gentoo.org>
664 Added some of the final functions to GLIInstallTemplate.
665 Yes this project is still active despite rare use of the Changelog!
666
667 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
668 Added the GLIPartitionTools.py file. This is a temporary insertion of
669 partitioning tools that will eventually go into their own package.
670
671 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
672 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
673 for the program). Added __init__(install_profile, client_configuration) to
674 GLI.InstallProfile. This sets install_profile and client_configuration once so as
675 to avoid constantly passing stuff every time we call a method.
676
677 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
678
679 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
680 files without messing up all the other stuff in them. This will be used for making
681 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
682
683 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
684
685 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
686 have a few basic things. I added two private methods. One is _depends(). This
687 will be used for dependency checking (ie. unpacking a tarball requires that
688 partitioning has been done). The other is _exec_in_chroot(). This is the exact
689 same syntax as os.system(), however, instead of being run in the liveCD
690 environment, it runs in the chroot. This requires a bit of fork() magic, so I
691 isolated the code. Hope to work more this week to get this class formed...
692
693 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
694
695 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
696 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
697 to allow for easier modification (mutable, rather than immutable objects). Updated
698 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
699 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
700 Added initial unit test code.
701
702 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
703
704 Added initial changelog. Setting up the basic structure of the CVS repository
705 for the project. Added the UML class diagram in docs. Added a skeletal GLI
706 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20