/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 718 - (show annotations) (download)
Tue Jun 28 04:49:19 2005 UTC (9 years, 5 months ago) by codeman
File size: 32970 byte(s)
finished almost all internationalization of GenDialog.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.266 2005/06/28 04:49:19 codeman Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 28 Jun 2005; Preston Cody <codeman@gentoo.org>
8 finished almost all internationalization of GenDialog.
9
10 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
11 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
12
13 27 Jun 2005; Preston Cody <codeman@gentoo.org>
14 fix extra entry in list_mirrors()
15 beginning internationalization runthrough.
16
17 26 Jun 2005; Preston Cody <codeman@gentoo.org>
18 added dialog.py to /src temporarily until it gets accepted upstream.
19 fix for unused value in form in dialog.py and changed heights.
20 fix GenDialog forms.
21
22 25 Jun 2005; Preston Cody <codeman@gentoo.org>
23 Changed hostname/domainname for new baselayout.
24 Changed _add_to_runlevel errors to logs.
25 Updated TODO list to show status of GenDialog
26 More updates to GenDialog including two checklists that probably won't work.
27 update IP to use comma-separated list instead of space separated for services.
28
29 24 Jun 2005; Preston Cody <codeman@gentoo.org>
30 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
31 GenDialog as it gets closer to completion.
32
33 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
34 Modify get_eth_info() to take a full interface name (eth0 fex). float()
35 instead of int() in add_partition_device_partition() for minor (closes 96804)
36
37 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
38 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
39 instead of 'interfaces[interface][1]' since DHCP uses that field for its
40 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
41
42 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
43 Apply spawn() patch from #96644 (with minor changes). Make sure the return
44 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
45 small error with <pipe>.close() returning None. Fix space vs. tab issue.
46 Fix undefined variable 'output' issue in spawn().
47
48 20 Jun 2005; Preston Cody <codeman@gentoo.org>
49 More updates to GenDialog and gli-d.
50
51 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
52 Modify list_mirrors() to return a list of mirror URL/name pairs.
53
54 19 Jun 2005; Preston Cody <codeman@gentoo.org>
55 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
56 get subarch.
57
58 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
59 Backend partitioning will create disklabel is none exists. Installprofile
60 defaults to "" now instead of "msdos" for disklabel type. Fix for
61 mount_local_partitions() to remember device along with minor in the
62 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
63 add else block to log unsupported netmount types to mount_network_shares()
64
65 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
66 src/GLIArchitectureTemplate.py:
67 Refactor kernel_compile common stuff, fix 2.4 build process.
68 src/fe/cli/clife.py:
69 Logging system.
70 src/GLIUtility.py, src/GLIStorageDevice.py:
71 Add comments about re-writes needed for boxes without sysfs.
72
73 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
74 src/GLIArchitectureTemplate.py:
75 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
76 'make dep' call for custom compile. build_mode support for prepare-only and
77 none types completed. custom compile function chains shell functions in
78 spawned script, to allow for catching all errors.
79
80 15 Jun 2005; Preston Cody <codeman@gentoo.org>
81 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
82 and GenDialog. other gendialog updates as well. kernel updates untested.
83
84 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
85 src/GLIInstallProfile.py:
86 Change structure of etc-portage stuff. The serialization was broken before my
87 last commit, and I am the only person that's ever used it. The new schema is
88 as follows:
89 <etc-portage>
90 <file name="package.mask"/>
91 <file name="package.unmask">
92 <entry atom="sys-kernel/openmosix-sources"/>
93 </file>
94 <file name="package.use">
95 <entry atom="sys-libs/db">
96 -java
97 </entry>
98 <entry atom="dev-libs/cyrus-sasl">
99 -ldap
100 </entry>
101 </file>
102 </etc-portage>
103
104
105 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
106 src/GLIInstallProfile.py:
107 Add new entry for gli-profile/kernel-build-method item. Add missing
108 serialize_etc_portage (temporary). Make serialize_make_conf always print the
109 keys in the same order.
110
111 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
112 src/GLIArchitectureTemplate.py:
113 Clean up commenting used by _edit_config(), and fix bug where wrong comment
114 was repeatedly appended to make.conf.
115
116 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
117 src/GLIArchitectureTemplate.py:
118 Put some Linux-2.6 specific code under a if statement. Store list of
119 successfully mounted swap device for using swapoff. Add proper error checking
120 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
121 'file'. Clean up some redundant code (thanks to pychecker).'
122
123 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
124 Fix typos: get_extended() instead of get_extended_partition(). Added
125 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
126 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
127
128 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
129 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
130 in add_network_interface.
131
132 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
133 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
134 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
135 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
136 prepare_chroot.
137
138 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
139 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
140 +src/fe/installer-gtk:
141 Add new automated CLI frontend. Add scripts that are the intended means to
142 use each frontend.
143
144 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
145 src/GLIClientController.py:
146 Add null type to network config, for cases where the interface is already up
147 and should not be touched (netboot for example).
148
149 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
150 src/GLIArchitectureTemplate.py:
151 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
152 string!. Try to use binary packages if available by default.
153
154 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
155 src/GLIArchitectureTemplate.py:
156 More error checking for _add_to_runlevel, to ensure that the init script
157 actually exists before we try to add it. set_services phase must take place
158 after the package installation, otherwise the init scripts might not exist.
159 Find the correct init script for the cron and logging daemons, and add that
160 instead of the package atom.
161
162 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
163 src/GLIArchitectureTemplate.py:
164 Fix up _edit_config so that it works if the file doesn't already exist. Fix
165 usage of 'file' to 'contents' for the variable name, as it shadows
166 __builtin__.file.
167
168 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
169 src/GLIArchitectureTemplate.py:
170 Add MTA install code, and include MTA install phase. Ensure
171 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
172 for 'none' kernel config for build_kernel phase. Put kernel_script in
173 /var/tmp instead of /root for build_kernel phase.
174
175 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
176 Rename mta variables to match syslog/cron variables.
177
178 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
179 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
180 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
181 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
182 src/templates/.cvsignore, src/tests/.cvsignore:
183 Refactor partition formatting again to include error checking. Allow 'none'
184 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
185
186 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
187 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
188 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
189 only have a single spawn call.
190
191 11 Jun 2005; Preston Cody <codeman@gentoo.org>
192 refixed samyron's fix of set_architecture_template.
193
194 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
195 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
196 be executable.
197
198 10 Jun 2005; Scott Myron <samyron@gentoo.org>
199 Fixed one of the FIXME's in the ClientConfiguration. There is now some
200 error checking when you call set_architecture_template.
201
202 10 Jun 2005; Preston Cody <codeman@gentoo.org>
203 moved the mkfsopts input to the partition options menu instead of the during
204 the creation process. updated GenDialog to say it supports reiserfs v3.
205
206 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
207 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
208 Complete support for 'mkfsopts' parameter in main system and dialogfe.
209 Add support for other partition types to dialogfe.
210 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
211 avoid integer overflows and wraparounds.
212
213 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
214 Removed start/end from XML output and added mkfsopts to partitioning info.
215 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
216 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
217 in GLIClientConfiguration. Change from .1 and .9 to constants for
218 partitioning. Fix free space overwriting bug. Remove a few unused functions
219 from rewrite. Fix call to get_partition_at()
220
221 8 Jun 2005; Preston Cody <codeman@gentoo.org>
222 Updates to GenDialog and dialogfe.
223
224 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
225 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
226
227 6 Jun 2005; Preston Cody <codeman@gentoo.org>
228 more GenDialog updates to partitioning.
229
230 5 Jun 2005; Preston Cody <codeman@gentoo.org>
231 Indenting issue in GLISD/get_ordered_partition_list.
232 updates to GenDialog partitioning and added default UTC for timezone in IP.
233
234 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
235 Added GLISD.get_model()
236
237 3 Jun 2005; Preston Cody <codeman@gentoo.org>
238 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
239 More updates to GenDialog :)
240
241 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
242 Added get_interface_realname() function.
243
244 2 Jun 2005; Preston Cody <codeman@gentoo.org>
245 Added auto-save of CConfig and copying to new /root after install.
246 yet even more GenDialog updates.
247
248 1 Jun 2005; Preston Cody <codeman@gentoo.org>
249 removed print statement from GLISD. more updates to GenDialog.
250
251 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
252 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
253 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
254 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
255 places in GLIClientConfiguration.
256
257 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
258 Fix mount_local_partitions(), configure_fstab(), and
259 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
260 A few more fixes for templates/x86Archtemplate
261
262 27 May 2005; Preston Cody <codeman@gentoo.org>
263 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
264 a work in progress.
265
266 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
267 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
268 directly. GLISD can now handle data imported from XML.
269
270 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
271 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
272 handle blank (no disklabel) disks.
273
274 20 May 2005; Preston Cody <codeman@gentoo.org>
275 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
276 up, documented, and separated out serialization and grouped all sections.
277
278 19 May 2005; Preston Cody <codeman@gentoo.org>
279 Reorganization of ClientConfiguration and gutting of unused functions.
280 Removed verbose option from CC. Moved import statement in IP and CConfig up.
281
282 18 May 2005; Preston Cody <codeman@gentoo.org>
283 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
284
285 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
286 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
287 partitioning. CC serializes install profile to disk and prepare_chroot()
288 copies it into /mnt/gentoo/root
289
290 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
291 Moved URI parsing into new function parse_uri()
292
293 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
294 Added XMLParser module.
295
296 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
297 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
298 Minor fix to is_uri() regex to allow hyphens in hostname.
299
300 12 May 2005; Preston Cody <codeman@gentoo.org>
301 Updated finishing_cleanup for new unmounting method from agaffney.
302
303 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
304 Fix GLILogger to use correct time format string. Fix _edit_config() to
305 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
306 unicode support to is_realstring().
307
308 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
309 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
310 return value instead of non-zero. Add code to output a traceback to the
311 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
312 instead of --nocolor.
313
314 10 May 2005; Preston Cody <codeman@gentoo.org>
315 Added GLIGenDialog.py to make a generic class for the dialog functions that
316 can be used by both dialogfe and the netfe/be. updated both for new filename.
317 date changes. 2004->2005.
318
319 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
320 Removed 'quiet=True' from spawn() calls
321
322 10 May 2005; Preston Cody <codeman@gentoo.org>
323 Updated GLIUtility with patches from chotchki. Also added documentation
324
325 9 May 2005; Preston Cody <codeman@gentoo.org>
326 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
327 Updated _edit_config in ArchTemplate, make_config, and various other fixes
328 from bug #89683, mostly touchups.
329
330 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
331 GLIStorageDevice cleanup patch from bug #91761
332
333 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
334 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
335 _edit_config(). Error logging casts 'error' to str
336
337 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
338 Exceptions received in CC are logged before being passed to the FE. Added
339 code to CC to handle exceptions *not* thrown by the installer itself.
340
341 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
342 get_max_mb_for_resize() returns -1 if not self.resizeable
343
344 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
345 More dirty rsync hacks :-/
346
347 29 Apr 2005; Preston Cody <codeman@gentoo.org>
348 Patches from chotchki (bug #90325) to improve CC networking. untested.
349
350 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
351 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
352 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
353 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
354 GLIStorageDevice as suggested by pychecker. Fix minor bug in
355 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
356 _get_packages_to_emerge()
357
358 28 Apr 2005; Preston Cody <codeman@gentoo.org>
359 Added group-adding code to set_users in ArchTemplate
360
361 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
362 Added post-install script code
363
364 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
365 Fixed encapsulation issues in GLIClientController (bug #90141)
366
367 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
368 Update resizing code in GLIStorageDevice
369
370 17 Apr 2005; Preston Cody <codeman@gentoo.org>
371 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
372
373 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
374 Reverted change to ArchTemplate and added support for commented line in old
375 code.
376
377 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
378 Changed _edit_config() to modify value in-place instead of commenting out and
379 adding the new value to the end of the file.
380
381 15 Apr 2005; Preston Cody <codeman@gentoo.org>
382 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
383 Also updated TODO list.
384
385 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
386 Use blackace's one-liner to add comments for all function for use with
387 pythondoc.
388
389 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
390 Moved 'end >= device_sectors' check out of loop to check for next partition's
391 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
392 Partitioning code now tracks start/end of extended for placing logicals. End
393 point of logical is now adjusted along with start.
394
395 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
396 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
397 the way of partitioning from a blank disk. Add int() around access to minor
398 key in partition information due to new partition code leaving them as float.
399
400 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
401 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
402
403 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
404 Major GLIStorageDevice overhaul...all MB now instead of sectors.
405
406 8 Apr 2005; Scott Myron <samyron@gentoo.org>
407 Added support for DHCP options and MAC addresses in the InstallProfile.
408
409 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
410 Changed mountopts check to work for blank and whitespace. Pipe emerge through
411 sed to properly strip out junk.
412
413 2 Apr 2005; Preston Cody <codeman@gentoo.org>
414 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
415 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
416
417 31 Mar 2005; Preston Cody <codeman@gentoo.org>
418 Fixed indent problem in GLICController
419
420 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
421 Check for disklabel type "loop" and use the device name without a minor.
422
423 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
424 Remove /tmp/compile_output.log and /var/log/install.log when install is
425 complete. Added code to (hopefully) keep 2nd thread running after install.
426 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
427 get_eth_info() function. Remove most of content in amd64ArchTemplate and
428 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
429
430 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
431 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
432 when unpacking tarball.
433
434 28 Mar 2005; Preston Cody <codeman@gentoo.org>
435 rewrote filesystem_tools. looks like it works so ripping out all the old
436 filesystem_tools code.
437
438 26 Mar 2005; Preston Cody <codeman@gentoo.org>
439 Changed the print statements to logging in the partitioning BE code.
440 the logger may need to be imported to the x86archtemplate. unknown yet.
441 Added the finishing_cleanup function.
442 added a fix to the logger from BenUrban
443
444 25 Mar 2005; Preston Cody <codeman@gentoo.org>
445 changed InstallProfile to remove is_uri check on kernel, stage, and portage
446 URIs. The blank uri check has been commented out.
447 ripped out error checking of set_services. this is done by _add_to_runlevel.
448
449 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
450 set_stage_tarball_uri() doesn't raise an exception on a blank string.
451
452 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
453 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
454 the install profile if available. Commented out spawn() debugging prints
455
456 23 Mar 2005; Preston Cody <codeman@gentoo.org>
457 small changes to setup_network_post. moved adding to runlevel of net.x to
458 after the device gets symlinked. added domainname runlevel command.
459
460 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
461 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
462 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
463 spawn() call in livecd-kernel code to pass environment variables.
464 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
465 the install profile if available.
466
467 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
468 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
469 to handle installing the livecd kernel into the new system.
470
471 22 Mar 2005; Preston Cody <codeman@gentoo.org>
472 should emerge hotplug and coldplug before adding them to runlevel.
473
474 21 Mar 2005; Preston Cody <codeman@gentoo.org>
475 took chroot out of grub_install command.
476
477 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
478 Changed chroot wrapper code in spawn() to write the wrapper the python way
479 instead of the bash way to avoid quote conflicts. Added
480 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
481 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
482 as it breaks the piping.
483
484 20 Mar 2005; Preston Cody <codeman@gentoo.org>
485 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
486
487 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
488 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
489 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
490 GLIInstallProfile.
491
492 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
493 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
494 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
495 into /mnt/gentoo in prepare_chroot()
496
497 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
498 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
499 retarted behavior regarding threads and signals. Add code to convert MB/%/*
500 to start/end sectors
501
502 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
503 Add 2>&1 to cmd in spawn()
504
505 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
506 Modified GLIUtility.exitsuccess() to work with return value from
507 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
508 creates wrapper script for commands run inside chroot so multiple commands
509 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
510 for the generated script from spawn()
511
512 16 Mar 2005; Preston Cody <codeman@gentoo.org>
513 Removed default values for stage tarball URI and portage tree URI from
514 InstallProfile. These should be set by the FEs. also added services step to
515 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
516 Possibly fixed CC DHCP bug with -n. (thx agaffney)
517
518 14 Mar 2005; Preston Cody <codeman@gentoo.org>
519 Small fix for setting the default gateway. Also added feature to dialogfe.
520
521 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
522 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
523
524 1 Mar 2005; Preston Cody <codeman@gentoo.org>
525 Fixed a bunch of true -> True typos. lots of em
526 only write new resolv.conf if there are dns servers listed.
527
528 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
529 Commented out 'display_on_tty8=True' in start_portmap()
530
531 18 Feb 2005; Preston Cody <codeman@gentoo.org>
532 added progress bar to dialogfe and fix logger bug in ArchTemplate.
533
534 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
535 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
536 lang parameter to __init__()
537
538 10 Feb 2005; Preston Cody <codeman@gentoo.org>
539 updates to TODO list.
540
541 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
542 Initial code for quickpkg GRP support. Fix loop to grab packages from
543 'emerge -p blah'
544
545 6 Feb 2005; Preston Cody <codeman@gentoo.org>
546 check for dhcp in the network stuff and emerge it if it is.
547 added quickpkg to TODO list
548
549 5 Feb 2005; Preston Cody <codeman@gentoo.org>
550 Changed the raising of 'warning' exceptions to a simple log of the error
551 so that the installer can continue.
552
553 3 Feb 2005; Preston Cody <codeman@gentoo.org>
554 Some big changes. First, changed most output to display_on_tty8.
555 Second, added log lines to all templates. Some smaller fixes such as typos.
556 Also did some cleanups of old commented lines.
557
558 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
559 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
560 Undo change with fix. Escaping fix in GLIStorageDevice.py
561
562 31 Jan 2005; Preston Cody <codeman@gentoo.org>
563 more updates to TODO list. hopefully we'll soon start removing items instead
564 of adding them.
565
566 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
567 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
568
569 27 Jan 2005; Preston Cody <codeman@gentoo.org>
570 updated TODO list. (again)
571
572 25 Jan 2005; Preston Cody <codeman@gentoo.org>
573 changed output of portmap start to display_on_tty8.
574 fixed bootloader for udev and multiple kernels
575 fixed custom kernel config (again)
576
577 22 Jan 2005; Preston Cody <codeman@gentoo.org>
578 changed default value of CC._enable_ssh to True because this is smart.
579 added code to allow custom kernel .config. may be unstable and break. sorry.
580
581 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
582 partition() now waits until after it checks for partition flags before delete
583 the partitions :P
584
585 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
586 Updated TODO. swapon failure it temporarily not an error. swapon is an error
587 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
588 blank.
589
590 19 Jan 2005; Preston Cody <codeman@gentoo.org>
591 Various fixes related to the add_users function. Still not yet finished.
592 Added things to the TODO list. Lets start using that!
593
594 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
595 Added code to x86Template to format newly created partitions. Also added
596 some error checking code. GLIStorageDevice passes 'minor' with data to
597 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
598 mounting code.
599
600 18 Jan 2005; Preston Cody <codeman@gentoo.org>
601 Took out unnecessary setting of random livecd root password. the cd already
602 sets it randomly.
603
604 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
605 Took out an unneeded step from CC's run()
606
607 15 Jan 2005; Preston Cody <codeman@gentoo.org>
608 Attempt at detecting and adding windows partitions to lilo.
609
610 14 Jan 2005; Preston Cody <codeman@gentoo.org>
611 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
612 partition. fixed misc exit_status => exitstatus typo.
613
614 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
615 Added basic code for resizing filesystems with pyparted. Fixed code for
616 resizing ntfs and ext2/3.
617
618 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
619 Fixed partition() in x86Template so that it scans through logicals and deletes
620 before deleting containing extended partition. Also clears partition table to
621 be safe before third pass.
622
623 08 Jan 2005; Preston Cody <codeman@gentoo.org>
624 Added mount_network_shares. not able to test it from this computer.
625 will test when i get back to school.
626 also added start_portmap to the client_controller as an always-do.
627 agaffney says this is needed for NFS mounts to work.
628
629 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
630 Partial rewrite of partitioning code in x86Template. No longer shells out to
631 parted to perform actions, now uses all pyparted calls. Code "works" in a
632 test, but still needs lots of TLC. Also modified tests/install.py to work
633 with x86Template and GLIClientConfiguration.
634
635 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
636 Initial move of partitioning code from ArchTemplate to x86Template.
637
638 07 Jan 2005; Preston Cody <codeman@gentoo.org>
639 Added grp_install and services to InstallProfile. forgot about the set_root_password
640
641 07 Jan 2005; Preston Cody <codeman@gentoo.org>
642 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
643 Test Install ran very well (skipping partitioning).
644
645 05 Jan 2005; Preston Cody <codeman@gentoo.org>
646 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
647 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
648 some may still have eluded me.
649
650 05 Jan 2005; Preston Cody <codeman@gentoo.org>
651 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
652 Just finished mount_local_partitions in GLIArchitectureTemplate
653
654 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
655 Added get_num_sectors() to GLIStorageDevice.
656
657 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
658 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
659 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
660 from GLIInstallProfile.
661
662 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
663 GLIStorageDevice returns "unknown" instead of "" for get_type()
664
665 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
666 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
667 actually work. Commented out resizability checking code for speed.
668
669 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
670 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
671 GLIStorageDevice at the suggestion of plors
672
673 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
674 Added a function to GLIUtility to pull a value from a make.conf-style config
675 file. Minor type fix to GLIInstallProfile.py
676
677 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
678 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
679 network mounts from partition data structure in GLIInstallProfile
680
681 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
682 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
683 can be resized.
684
685 27 Oct 2004; Preston Cody <codeman@gentoo.org>
686 Added some of the final functions to GLIInstallTemplate.
687 Yes this project is still active despite rare use of the Changelog!
688
689 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
690 Added the GLIPartitionTools.py file. This is a temporary insertion of
691 partitioning tools that will eventually go into their own package.
692
693 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
694 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
695 for the program). Added __init__(install_profile, client_configuration) to
696 GLI.InstallProfile. This sets install_profile and client_configuration once so as
697 to avoid constantly passing stuff every time we call a method.
698
699 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
700
701 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
702 files without messing up all the other stuff in them. This will be used for making
703 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
704
705 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
706
707 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
708 have a few basic things. I added two private methods. One is _depends(). This
709 will be used for dependency checking (ie. unpacking a tarball requires that
710 partitioning has been done). The other is _exec_in_chroot(). This is the exact
711 same syntax as os.system(), however, instead of being run in the liveCD
712 environment, it runs in the chroot. This requires a bit of fork() magic, so I
713 isolated the code. Hope to work more this week to get this class formed...
714
715 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
716
717 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
718 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
719 to allow for easier modification (mutable, rather than immutable objects). Updated
720 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
721 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
722 Added initial unit test code.
723
724 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
725
726 Added initial changelog. Setting up the basic structure of the CVS repository
727 for the project. Added the UML class diagram in docs. Added a skeletal GLI
728 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20