/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 719 - (show annotations) (download)
Tue Jun 28 07:11:16 2005 UTC (9 years, 3 months ago) by codeman
File size: 33087 byte(s)
  attempt at fixing rc.conf function. moved 3 generate functions out of
  fe/gtk/RcDotConf and put them in Utility.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.267 2005/06/28 07:11:16 codeman Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 28 Jun 2005; Preston Cody <codeman@gentoo.org>
8 finished almost all internationalization of GenDialog.
9 attempt at fixing rc.conf function. moved 3 generate functions out of
10 fe/gtk/RcDotConf and put them in Utility.
11
12 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
13 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
14
15 27 Jun 2005; Preston Cody <codeman@gentoo.org>
16 fix extra entry in list_mirrors()
17 beginning internationalization runthrough.
18
19 26 Jun 2005; Preston Cody <codeman@gentoo.org>
20 added dialog.py to /src temporarily until it gets accepted upstream.
21 fix for unused value in form in dialog.py and changed heights.
22 fix GenDialog forms.
23
24 25 Jun 2005; Preston Cody <codeman@gentoo.org>
25 Changed hostname/domainname for new baselayout.
26 Changed _add_to_runlevel errors to logs.
27 Updated TODO list to show status of GenDialog
28 More updates to GenDialog including two checklists that probably won't work.
29 update IP to use comma-separated list instead of space separated for services.
30
31 24 Jun 2005; Preston Cody <codeman@gentoo.org>
32 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
33 GenDialog as it gets closer to completion.
34
35 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
36 Modify get_eth_info() to take a full interface name (eth0 fex). float()
37 instead of int() in add_partition_device_partition() for minor (closes 96804)
38
39 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
40 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
41 instead of 'interfaces[interface][1]' since DHCP uses that field for its
42 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
43
44 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
45 Apply spawn() patch from #96644 (with minor changes). Make sure the return
46 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
47 small error with <pipe>.close() returning None. Fix space vs. tab issue.
48 Fix undefined variable 'output' issue in spawn().
49
50 20 Jun 2005; Preston Cody <codeman@gentoo.org>
51 More updates to GenDialog and gli-d.
52
53 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
54 Modify list_mirrors() to return a list of mirror URL/name pairs.
55
56 19 Jun 2005; Preston Cody <codeman@gentoo.org>
57 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
58 get subarch.
59
60 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
61 Backend partitioning will create disklabel is none exists. Installprofile
62 defaults to "" now instead of "msdos" for disklabel type. Fix for
63 mount_local_partitions() to remember device along with minor in the
64 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
65 add else block to log unsupported netmount types to mount_network_shares()
66
67 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
68 src/GLIArchitectureTemplate.py:
69 Refactor kernel_compile common stuff, fix 2.4 build process.
70 src/fe/cli/clife.py:
71 Logging system.
72 src/GLIUtility.py, src/GLIStorageDevice.py:
73 Add comments about re-writes needed for boxes without sysfs.
74
75 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
76 src/GLIArchitectureTemplate.py:
77 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
78 'make dep' call for custom compile. build_mode support for prepare-only and
79 none types completed. custom compile function chains shell functions in
80 spawned script, to allow for catching all errors.
81
82 15 Jun 2005; Preston Cody <codeman@gentoo.org>
83 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
84 and GenDialog. other gendialog updates as well. kernel updates untested.
85
86 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
87 src/GLIInstallProfile.py:
88 Change structure of etc-portage stuff. The serialization was broken before my
89 last commit, and I am the only person that's ever used it. The new schema is
90 as follows:
91 <etc-portage>
92 <file name="package.mask"/>
93 <file name="package.unmask">
94 <entry atom="sys-kernel/openmosix-sources"/>
95 </file>
96 <file name="package.use">
97 <entry atom="sys-libs/db">
98 -java
99 </entry>
100 <entry atom="dev-libs/cyrus-sasl">
101 -ldap
102 </entry>
103 </file>
104 </etc-portage>
105
106
107 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
108 src/GLIInstallProfile.py:
109 Add new entry for gli-profile/kernel-build-method item. Add missing
110 serialize_etc_portage (temporary). Make serialize_make_conf always print the
111 keys in the same order.
112
113 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
114 src/GLIArchitectureTemplate.py:
115 Clean up commenting used by _edit_config(), and fix bug where wrong comment
116 was repeatedly appended to make.conf.
117
118 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
119 src/GLIArchitectureTemplate.py:
120 Put some Linux-2.6 specific code under a if statement. Store list of
121 successfully mounted swap device for using swapoff. Add proper error checking
122 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
123 'file'. Clean up some redundant code (thanks to pychecker).'
124
125 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
126 Fix typos: get_extended() instead of get_extended_partition(). Added
127 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
128 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
129
130 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
131 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
132 in add_network_interface.
133
134 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
135 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
136 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
137 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
138 prepare_chroot.
139
140 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
141 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
142 +src/fe/installer-gtk:
143 Add new automated CLI frontend. Add scripts that are the intended means to
144 use each frontend.
145
146 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
147 src/GLIClientController.py:
148 Add null type to network config, for cases where the interface is already up
149 and should not be touched (netboot for example).
150
151 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
152 src/GLIArchitectureTemplate.py:
153 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
154 string!. Try to use binary packages if available by default.
155
156 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
157 src/GLIArchitectureTemplate.py:
158 More error checking for _add_to_runlevel, to ensure that the init script
159 actually exists before we try to add it. set_services phase must take place
160 after the package installation, otherwise the init scripts might not exist.
161 Find the correct init script for the cron and logging daemons, and add that
162 instead of the package atom.
163
164 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
165 src/GLIArchitectureTemplate.py:
166 Fix up _edit_config so that it works if the file doesn't already exist. Fix
167 usage of 'file' to 'contents' for the variable name, as it shadows
168 __builtin__.file.
169
170 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
171 src/GLIArchitectureTemplate.py:
172 Add MTA install code, and include MTA install phase. Ensure
173 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
174 for 'none' kernel config for build_kernel phase. Put kernel_script in
175 /var/tmp instead of /root for build_kernel phase.
176
177 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
178 Rename mta variables to match syslog/cron variables.
179
180 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
181 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
182 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
183 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
184 src/templates/.cvsignore, src/tests/.cvsignore:
185 Refactor partition formatting again to include error checking. Allow 'none'
186 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
187
188 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
189 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
190 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
191 only have a single spawn call.
192
193 11 Jun 2005; Preston Cody <codeman@gentoo.org>
194 refixed samyron's fix of set_architecture_template.
195
196 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
197 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
198 be executable.
199
200 10 Jun 2005; Scott Myron <samyron@gentoo.org>
201 Fixed one of the FIXME's in the ClientConfiguration. There is now some
202 error checking when you call set_architecture_template.
203
204 10 Jun 2005; Preston Cody <codeman@gentoo.org>
205 moved the mkfsopts input to the partition options menu instead of the during
206 the creation process. updated GenDialog to say it supports reiserfs v3.
207
208 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
209 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
210 Complete support for 'mkfsopts' parameter in main system and dialogfe.
211 Add support for other partition types to dialogfe.
212 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
213 avoid integer overflows and wraparounds.
214
215 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
216 Removed start/end from XML output and added mkfsopts to partitioning info.
217 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
218 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
219 in GLIClientConfiguration. Change from .1 and .9 to constants for
220 partitioning. Fix free space overwriting bug. Remove a few unused functions
221 from rewrite. Fix call to get_partition_at()
222
223 8 Jun 2005; Preston Cody <codeman@gentoo.org>
224 Updates to GenDialog and dialogfe.
225
226 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
227 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
228
229 6 Jun 2005; Preston Cody <codeman@gentoo.org>
230 more GenDialog updates to partitioning.
231
232 5 Jun 2005; Preston Cody <codeman@gentoo.org>
233 Indenting issue in GLISD/get_ordered_partition_list.
234 updates to GenDialog partitioning and added default UTC for timezone in IP.
235
236 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
237 Added GLISD.get_model()
238
239 3 Jun 2005; Preston Cody <codeman@gentoo.org>
240 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
241 More updates to GenDialog :)
242
243 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
244 Added get_interface_realname() function.
245
246 2 Jun 2005; Preston Cody <codeman@gentoo.org>
247 Added auto-save of CConfig and copying to new /root after install.
248 yet even more GenDialog updates.
249
250 1 Jun 2005; Preston Cody <codeman@gentoo.org>
251 removed print statement from GLISD. more updates to GenDialog.
252
253 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
254 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
255 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
256 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
257 places in GLIClientConfiguration.
258
259 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
260 Fix mount_local_partitions(), configure_fstab(), and
261 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
262 A few more fixes for templates/x86Archtemplate
263
264 27 May 2005; Preston Cody <codeman@gentoo.org>
265 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
266 a work in progress.
267
268 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
269 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
270 directly. GLISD can now handle data imported from XML.
271
272 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
273 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
274 handle blank (no disklabel) disks.
275
276 20 May 2005; Preston Cody <codeman@gentoo.org>
277 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
278 up, documented, and separated out serialization and grouped all sections.
279
280 19 May 2005; Preston Cody <codeman@gentoo.org>
281 Reorganization of ClientConfiguration and gutting of unused functions.
282 Removed verbose option from CC. Moved import statement in IP and CConfig up.
283
284 18 May 2005; Preston Cody <codeman@gentoo.org>
285 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
286
287 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
288 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
289 partitioning. CC serializes install profile to disk and prepare_chroot()
290 copies it into /mnt/gentoo/root
291
292 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
293 Moved URI parsing into new function parse_uri()
294
295 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
296 Added XMLParser module.
297
298 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
299 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
300 Minor fix to is_uri() regex to allow hyphens in hostname.
301
302 12 May 2005; Preston Cody <codeman@gentoo.org>
303 Updated finishing_cleanup for new unmounting method from agaffney.
304
305 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
306 Fix GLILogger to use correct time format string. Fix _edit_config() to
307 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
308 unicode support to is_realstring().
309
310 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
311 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
312 return value instead of non-zero. Add code to output a traceback to the
313 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
314 instead of --nocolor.
315
316 10 May 2005; Preston Cody <codeman@gentoo.org>
317 Added GLIGenDialog.py to make a generic class for the dialog functions that
318 can be used by both dialogfe and the netfe/be. updated both for new filename.
319 date changes. 2004->2005.
320
321 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
322 Removed 'quiet=True' from spawn() calls
323
324 10 May 2005; Preston Cody <codeman@gentoo.org>
325 Updated GLIUtility with patches from chotchki. Also added documentation
326
327 9 May 2005; Preston Cody <codeman@gentoo.org>
328 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
329 Updated _edit_config in ArchTemplate, make_config, and various other fixes
330 from bug #89683, mostly touchups.
331
332 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
333 GLIStorageDevice cleanup patch from bug #91761
334
335 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
336 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
337 _edit_config(). Error logging casts 'error' to str
338
339 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
340 Exceptions received in CC are logged before being passed to the FE. Added
341 code to CC to handle exceptions *not* thrown by the installer itself.
342
343 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
344 get_max_mb_for_resize() returns -1 if not self.resizeable
345
346 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
347 More dirty rsync hacks :-/
348
349 29 Apr 2005; Preston Cody <codeman@gentoo.org>
350 Patches from chotchki (bug #90325) to improve CC networking. untested.
351
352 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
353 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
354 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
355 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
356 GLIStorageDevice as suggested by pychecker. Fix minor bug in
357 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
358 _get_packages_to_emerge()
359
360 28 Apr 2005; Preston Cody <codeman@gentoo.org>
361 Added group-adding code to set_users in ArchTemplate
362
363 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
364 Added post-install script code
365
366 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
367 Fixed encapsulation issues in GLIClientController (bug #90141)
368
369 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
370 Update resizing code in GLIStorageDevice
371
372 17 Apr 2005; Preston Cody <codeman@gentoo.org>
373 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
374
375 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
376 Reverted change to ArchTemplate and added support for commented line in old
377 code.
378
379 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
380 Changed _edit_config() to modify value in-place instead of commenting out and
381 adding the new value to the end of the file.
382
383 15 Apr 2005; Preston Cody <codeman@gentoo.org>
384 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
385 Also updated TODO list.
386
387 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
388 Use blackace's one-liner to add comments for all function for use with
389 pythondoc.
390
391 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
392 Moved 'end >= device_sectors' check out of loop to check for next partition's
393 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
394 Partitioning code now tracks start/end of extended for placing logicals. End
395 point of logical is now adjusted along with start.
396
397 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
398 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
399 the way of partitioning from a blank disk. Add int() around access to minor
400 key in partition information due to new partition code leaving them as float.
401
402 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
403 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
404
405 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
406 Major GLIStorageDevice overhaul...all MB now instead of sectors.
407
408 8 Apr 2005; Scott Myron <samyron@gentoo.org>
409 Added support for DHCP options and MAC addresses in the InstallProfile.
410
411 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
412 Changed mountopts check to work for blank and whitespace. Pipe emerge through
413 sed to properly strip out junk.
414
415 2 Apr 2005; Preston Cody <codeman@gentoo.org>
416 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
417 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
418
419 31 Mar 2005; Preston Cody <codeman@gentoo.org>
420 Fixed indent problem in GLICController
421
422 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
423 Check for disklabel type "loop" and use the device name without a minor.
424
425 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
426 Remove /tmp/compile_output.log and /var/log/install.log when install is
427 complete. Added code to (hopefully) keep 2nd thread running after install.
428 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
429 get_eth_info() function. Remove most of content in amd64ArchTemplate and
430 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
431
432 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
433 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
434 when unpacking tarball.
435
436 28 Mar 2005; Preston Cody <codeman@gentoo.org>
437 rewrote filesystem_tools. looks like it works so ripping out all the old
438 filesystem_tools code.
439
440 26 Mar 2005; Preston Cody <codeman@gentoo.org>
441 Changed the print statements to logging in the partitioning BE code.
442 the logger may need to be imported to the x86archtemplate. unknown yet.
443 Added the finishing_cleanup function.
444 added a fix to the logger from BenUrban
445
446 25 Mar 2005; Preston Cody <codeman@gentoo.org>
447 changed InstallProfile to remove is_uri check on kernel, stage, and portage
448 URIs. The blank uri check has been commented out.
449 ripped out error checking of set_services. this is done by _add_to_runlevel.
450
451 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
452 set_stage_tarball_uri() doesn't raise an exception on a blank string.
453
454 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
455 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
456 the install profile if available. Commented out spawn() debugging prints
457
458 23 Mar 2005; Preston Cody <codeman@gentoo.org>
459 small changes to setup_network_post. moved adding to runlevel of net.x to
460 after the device gets symlinked. added domainname runlevel command.
461
462 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
463 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
464 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
465 spawn() call in livecd-kernel code to pass environment variables.
466 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
467 the install profile if available.
468
469 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
470 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
471 to handle installing the livecd kernel into the new system.
472
473 22 Mar 2005; Preston Cody <codeman@gentoo.org>
474 should emerge hotplug and coldplug before adding them to runlevel.
475
476 21 Mar 2005; Preston Cody <codeman@gentoo.org>
477 took chroot out of grub_install command.
478
479 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
480 Changed chroot wrapper code in spawn() to write the wrapper the python way
481 instead of the bash way to avoid quote conflicts. Added
482 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
483 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
484 as it breaks the piping.
485
486 20 Mar 2005; Preston Cody <codeman@gentoo.org>
487 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
488
489 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
490 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
491 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
492 GLIInstallProfile.
493
494 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
495 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
496 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
497 into /mnt/gentoo in prepare_chroot()
498
499 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
500 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
501 retarted behavior regarding threads and signals. Add code to convert MB/%/*
502 to start/end sectors
503
504 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
505 Add 2>&1 to cmd in spawn()
506
507 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
508 Modified GLIUtility.exitsuccess() to work with return value from
509 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
510 creates wrapper script for commands run inside chroot so multiple commands
511 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
512 for the generated script from spawn()
513
514 16 Mar 2005; Preston Cody <codeman@gentoo.org>
515 Removed default values for stage tarball URI and portage tree URI from
516 InstallProfile. These should be set by the FEs. also added services step to
517 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
518 Possibly fixed CC DHCP bug with -n. (thx agaffney)
519
520 14 Mar 2005; Preston Cody <codeman@gentoo.org>
521 Small fix for setting the default gateway. Also added feature to dialogfe.
522
523 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
524 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
525
526 1 Mar 2005; Preston Cody <codeman@gentoo.org>
527 Fixed a bunch of true -> True typos. lots of em
528 only write new resolv.conf if there are dns servers listed.
529
530 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
531 Commented out 'display_on_tty8=True' in start_portmap()
532
533 18 Feb 2005; Preston Cody <codeman@gentoo.org>
534 added progress bar to dialogfe and fix logger bug in ArchTemplate.
535
536 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
537 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
538 lang parameter to __init__()
539
540 10 Feb 2005; Preston Cody <codeman@gentoo.org>
541 updates to TODO list.
542
543 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
544 Initial code for quickpkg GRP support. Fix loop to grab packages from
545 'emerge -p blah'
546
547 6 Feb 2005; Preston Cody <codeman@gentoo.org>
548 check for dhcp in the network stuff and emerge it if it is.
549 added quickpkg to TODO list
550
551 5 Feb 2005; Preston Cody <codeman@gentoo.org>
552 Changed the raising of 'warning' exceptions to a simple log of the error
553 so that the installer can continue.
554
555 3 Feb 2005; Preston Cody <codeman@gentoo.org>
556 Some big changes. First, changed most output to display_on_tty8.
557 Second, added log lines to all templates. Some smaller fixes such as typos.
558 Also did some cleanups of old commented lines.
559
560 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
561 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
562 Undo change with fix. Escaping fix in GLIStorageDevice.py
563
564 31 Jan 2005; Preston Cody <codeman@gentoo.org>
565 more updates to TODO list. hopefully we'll soon start removing items instead
566 of adding them.
567
568 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
569 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
570
571 27 Jan 2005; Preston Cody <codeman@gentoo.org>
572 updated TODO list. (again)
573
574 25 Jan 2005; Preston Cody <codeman@gentoo.org>
575 changed output of portmap start to display_on_tty8.
576 fixed bootloader for udev and multiple kernels
577 fixed custom kernel config (again)
578
579 22 Jan 2005; Preston Cody <codeman@gentoo.org>
580 changed default value of CC._enable_ssh to True because this is smart.
581 added code to allow custom kernel .config. may be unstable and break. sorry.
582
583 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
584 partition() now waits until after it checks for partition flags before delete
585 the partitions :P
586
587 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
588 Updated TODO. swapon failure it temporarily not an error. swapon is an error
589 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
590 blank.
591
592 19 Jan 2005; Preston Cody <codeman@gentoo.org>
593 Various fixes related to the add_users function. Still not yet finished.
594 Added things to the TODO list. Lets start using that!
595
596 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
597 Added code to x86Template to format newly created partitions. Also added
598 some error checking code. GLIStorageDevice passes 'minor' with data to
599 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
600 mounting code.
601
602 18 Jan 2005; Preston Cody <codeman@gentoo.org>
603 Took out unnecessary setting of random livecd root password. the cd already
604 sets it randomly.
605
606 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
607 Took out an unneeded step from CC's run()
608
609 15 Jan 2005; Preston Cody <codeman@gentoo.org>
610 Attempt at detecting and adding windows partitions to lilo.
611
612 14 Jan 2005; Preston Cody <codeman@gentoo.org>
613 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
614 partition. fixed misc exit_status => exitstatus typo.
615
616 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
617 Added basic code for resizing filesystems with pyparted. Fixed code for
618 resizing ntfs and ext2/3.
619
620 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
621 Fixed partition() in x86Template so that it scans through logicals and deletes
622 before deleting containing extended partition. Also clears partition table to
623 be safe before third pass.
624
625 08 Jan 2005; Preston Cody <codeman@gentoo.org>
626 Added mount_network_shares. not able to test it from this computer.
627 will test when i get back to school.
628 also added start_portmap to the client_controller as an always-do.
629 agaffney says this is needed for NFS mounts to work.
630
631 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
632 Partial rewrite of partitioning code in x86Template. No longer shells out to
633 parted to perform actions, now uses all pyparted calls. Code "works" in a
634 test, but still needs lots of TLC. Also modified tests/install.py to work
635 with x86Template and GLIClientConfiguration.
636
637 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
638 Initial move of partitioning code from ArchTemplate to x86Template.
639
640 07 Jan 2005; Preston Cody <codeman@gentoo.org>
641 Added grp_install and services to InstallProfile. forgot about the set_root_password
642
643 07 Jan 2005; Preston Cody <codeman@gentoo.org>
644 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
645 Test Install ran very well (skipping partitioning).
646
647 05 Jan 2005; Preston Cody <codeman@gentoo.org>
648 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
649 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
650 some may still have eluded me.
651
652 05 Jan 2005; Preston Cody <codeman@gentoo.org>
653 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
654 Just finished mount_local_partitions in GLIArchitectureTemplate
655
656 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
657 Added get_num_sectors() to GLIStorageDevice.
658
659 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
660 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
661 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
662 from GLIInstallProfile.
663
664 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
665 GLIStorageDevice returns "unknown" instead of "" for get_type()
666
667 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
668 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
669 actually work. Commented out resizability checking code for speed.
670
671 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
672 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
673 GLIStorageDevice at the suggestion of plors
674
675 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
676 Added a function to GLIUtility to pull a value from a make.conf-style config
677 file. Minor type fix to GLIInstallProfile.py
678
679 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
680 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
681 network mounts from partition data structure in GLIInstallProfile
682
683 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
684 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
685 can be resized.
686
687 27 Oct 2004; Preston Cody <codeman@gentoo.org>
688 Added some of the final functions to GLIInstallTemplate.
689 Yes this project is still active despite rare use of the Changelog!
690
691 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
692 Added the GLIPartitionTools.py file. This is a temporary insertion of
693 partitioning tools that will eventually go into their own package.
694
695 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
696 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
697 for the program). Added __init__(install_profile, client_configuration) to
698 GLI.InstallProfile. This sets install_profile and client_configuration once so as
699 to avoid constantly passing stuff every time we call a method.
700
701 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
702
703 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
704 files without messing up all the other stuff in them. This will be used for making
705 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
706
707 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
708
709 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
710 have a few basic things. I added two private methods. One is _depends(). This
711 will be used for dependency checking (ie. unpacking a tarball requires that
712 partitioning has been done). The other is _exec_in_chroot(). This is the exact
713 same syntax as os.system(), however, instead of being run in the liveCD
714 environment, it runs in the chroot. This requires a bit of fork() magic, so I
715 isolated the code. Hope to work more this week to get this class formed...
716
717 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
718
719 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
720 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
721 to allow for easier modification (mutable, rather than immutable objects). Updated
722 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
723 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
724 Added initial unit test code.
725
726 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
727
728 Added initial changelog. Setting up the basic structure of the CVS repository
729 for the project. Added the UML class diagram in docs. Added a skeletal GLI
730 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20