/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 720 - (show annotations) (download)
Tue Jun 28 07:43:30 2005 UTC (9 years, 5 months ago) by agaffney
File size: 33219 byte(s)
Add code to update_config_files() to go through etc_files and update stuff.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.268 2005/06/28 07:43:30 agaffney Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
8 Add code to update_config_files() to go through etc_files and update stuff.
9
10 28 Jun 2005; Preston Cody <codeman@gentoo.org>
11 finished almost all internationalization of GenDialog.
12 attempt at fixing rc.conf function. moved 3 generate functions out of
13 fe/gtk/RcDotConf and put them in Utility.
14
15 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
16 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
17
18 27 Jun 2005; Preston Cody <codeman@gentoo.org>
19 fix extra entry in list_mirrors()
20 beginning internationalization runthrough.
21
22 26 Jun 2005; Preston Cody <codeman@gentoo.org>
23 added dialog.py to /src temporarily until it gets accepted upstream.
24 fix for unused value in form in dialog.py and changed heights.
25 fix GenDialog forms.
26
27 25 Jun 2005; Preston Cody <codeman@gentoo.org>
28 Changed hostname/domainname for new baselayout.
29 Changed _add_to_runlevel errors to logs.
30 Updated TODO list to show status of GenDialog
31 More updates to GenDialog including two checklists that probably won't work.
32 update IP to use comma-separated list instead of space separated for services.
33
34 24 Jun 2005; Preston Cody <codeman@gentoo.org>
35 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
36 GenDialog as it gets closer to completion.
37
38 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
39 Modify get_eth_info() to take a full interface name (eth0 fex). float()
40 instead of int() in add_partition_device_partition() for minor (closes 96804)
41
42 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
43 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
44 instead of 'interfaces[interface][1]' since DHCP uses that field for its
45 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
46
47 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
48 Apply spawn() patch from #96644 (with minor changes). Make sure the return
49 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
50 small error with <pipe>.close() returning None. Fix space vs. tab issue.
51 Fix undefined variable 'output' issue in spawn().
52
53 20 Jun 2005; Preston Cody <codeman@gentoo.org>
54 More updates to GenDialog and gli-d.
55
56 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
57 Modify list_mirrors() to return a list of mirror URL/name pairs.
58
59 19 Jun 2005; Preston Cody <codeman@gentoo.org>
60 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
61 get subarch.
62
63 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
64 Backend partitioning will create disklabel is none exists. Installprofile
65 defaults to "" now instead of "msdos" for disklabel type. Fix for
66 mount_local_partitions() to remember device along with minor in the
67 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
68 add else block to log unsupported netmount types to mount_network_shares()
69
70 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
71 src/GLIArchitectureTemplate.py:
72 Refactor kernel_compile common stuff, fix 2.4 build process.
73 src/fe/cli/clife.py:
74 Logging system.
75 src/GLIUtility.py, src/GLIStorageDevice.py:
76 Add comments about re-writes needed for boxes without sysfs.
77
78 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
79 src/GLIArchitectureTemplate.py:
80 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
81 'make dep' call for custom compile. build_mode support for prepare-only and
82 none types completed. custom compile function chains shell functions in
83 spawned script, to allow for catching all errors.
84
85 15 Jun 2005; Preston Cody <codeman@gentoo.org>
86 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
87 and GenDialog. other gendialog updates as well. kernel updates untested.
88
89 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
90 src/GLIInstallProfile.py:
91 Change structure of etc-portage stuff. The serialization was broken before my
92 last commit, and I am the only person that's ever used it. The new schema is
93 as follows:
94 <etc-portage>
95 <file name="package.mask"/>
96 <file name="package.unmask">
97 <entry atom="sys-kernel/openmosix-sources"/>
98 </file>
99 <file name="package.use">
100 <entry atom="sys-libs/db">
101 -java
102 </entry>
103 <entry atom="dev-libs/cyrus-sasl">
104 -ldap
105 </entry>
106 </file>
107 </etc-portage>
108
109
110 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
111 src/GLIInstallProfile.py:
112 Add new entry for gli-profile/kernel-build-method item. Add missing
113 serialize_etc_portage (temporary). Make serialize_make_conf always print the
114 keys in the same order.
115
116 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
117 src/GLIArchitectureTemplate.py:
118 Clean up commenting used by _edit_config(), and fix bug where wrong comment
119 was repeatedly appended to make.conf.
120
121 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
122 src/GLIArchitectureTemplate.py:
123 Put some Linux-2.6 specific code under a if statement. Store list of
124 successfully mounted swap device for using swapoff. Add proper error checking
125 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
126 'file'. Clean up some redundant code (thanks to pychecker).'
127
128 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
129 Fix typos: get_extended() instead of get_extended_partition(). Added
130 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
131 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
132
133 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
134 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
135 in add_network_interface.
136
137 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
138 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
139 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
140 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
141 prepare_chroot.
142
143 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
144 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
145 +src/fe/installer-gtk:
146 Add new automated CLI frontend. Add scripts that are the intended means to
147 use each frontend.
148
149 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
150 src/GLIClientController.py:
151 Add null type to network config, for cases where the interface is already up
152 and should not be touched (netboot for example).
153
154 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
155 src/GLIArchitectureTemplate.py:
156 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
157 string!. Try to use binary packages if available by default.
158
159 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
160 src/GLIArchitectureTemplate.py:
161 More error checking for _add_to_runlevel, to ensure that the init script
162 actually exists before we try to add it. set_services phase must take place
163 after the package installation, otherwise the init scripts might not exist.
164 Find the correct init script for the cron and logging daemons, and add that
165 instead of the package atom.
166
167 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
168 src/GLIArchitectureTemplate.py:
169 Fix up _edit_config so that it works if the file doesn't already exist. Fix
170 usage of 'file' to 'contents' for the variable name, as it shadows
171 __builtin__.file.
172
173 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
174 src/GLIArchitectureTemplate.py:
175 Add MTA install code, and include MTA install phase. Ensure
176 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
177 for 'none' kernel config for build_kernel phase. Put kernel_script in
178 /var/tmp instead of /root for build_kernel phase.
179
180 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
181 Rename mta variables to match syslog/cron variables.
182
183 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
184 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
185 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
186 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
187 src/templates/.cvsignore, src/tests/.cvsignore:
188 Refactor partition formatting again to include error checking. Allow 'none'
189 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
190
191 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
192 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
193 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
194 only have a single spawn call.
195
196 11 Jun 2005; Preston Cody <codeman@gentoo.org>
197 refixed samyron's fix of set_architecture_template.
198
199 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
200 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
201 be executable.
202
203 10 Jun 2005; Scott Myron <samyron@gentoo.org>
204 Fixed one of the FIXME's in the ClientConfiguration. There is now some
205 error checking when you call set_architecture_template.
206
207 10 Jun 2005; Preston Cody <codeman@gentoo.org>
208 moved the mkfsopts input to the partition options menu instead of the during
209 the creation process. updated GenDialog to say it supports reiserfs v3.
210
211 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
212 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
213 Complete support for 'mkfsopts' parameter in main system and dialogfe.
214 Add support for other partition types to dialogfe.
215 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
216 avoid integer overflows and wraparounds.
217
218 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
219 Removed start/end from XML output and added mkfsopts to partitioning info.
220 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
221 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
222 in GLIClientConfiguration. Change from .1 and .9 to constants for
223 partitioning. Fix free space overwriting bug. Remove a few unused functions
224 from rewrite. Fix call to get_partition_at()
225
226 8 Jun 2005; Preston Cody <codeman@gentoo.org>
227 Updates to GenDialog and dialogfe.
228
229 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
230 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
231
232 6 Jun 2005; Preston Cody <codeman@gentoo.org>
233 more GenDialog updates to partitioning.
234
235 5 Jun 2005; Preston Cody <codeman@gentoo.org>
236 Indenting issue in GLISD/get_ordered_partition_list.
237 updates to GenDialog partitioning and added default UTC for timezone in IP.
238
239 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
240 Added GLISD.get_model()
241
242 3 Jun 2005; Preston Cody <codeman@gentoo.org>
243 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
244 More updates to GenDialog :)
245
246 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
247 Added get_interface_realname() function.
248
249 2 Jun 2005; Preston Cody <codeman@gentoo.org>
250 Added auto-save of CConfig and copying to new /root after install.
251 yet even more GenDialog updates.
252
253 1 Jun 2005; Preston Cody <codeman@gentoo.org>
254 removed print statement from GLISD. more updates to GenDialog.
255
256 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
257 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
258 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
259 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
260 places in GLIClientConfiguration.
261
262 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
263 Fix mount_local_partitions(), configure_fstab(), and
264 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
265 A few more fixes for templates/x86Archtemplate
266
267 27 May 2005; Preston Cody <codeman@gentoo.org>
268 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
269 a work in progress.
270
271 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
272 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
273 directly. GLISD can now handle data imported from XML.
274
275 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
276 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
277 handle blank (no disklabel) disks.
278
279 20 May 2005; Preston Cody <codeman@gentoo.org>
280 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
281 up, documented, and separated out serialization and grouped all sections.
282
283 19 May 2005; Preston Cody <codeman@gentoo.org>
284 Reorganization of ClientConfiguration and gutting of unused functions.
285 Removed verbose option from CC. Moved import statement in IP and CConfig up.
286
287 18 May 2005; Preston Cody <codeman@gentoo.org>
288 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
289
290 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
291 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
292 partitioning. CC serializes install profile to disk and prepare_chroot()
293 copies it into /mnt/gentoo/root
294
295 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
296 Moved URI parsing into new function parse_uri()
297
298 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
299 Added XMLParser module.
300
301 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
302 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
303 Minor fix to is_uri() regex to allow hyphens in hostname.
304
305 12 May 2005; Preston Cody <codeman@gentoo.org>
306 Updated finishing_cleanup for new unmounting method from agaffney.
307
308 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
309 Fix GLILogger to use correct time format string. Fix _edit_config() to
310 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
311 unicode support to is_realstring().
312
313 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
314 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
315 return value instead of non-zero. Add code to output a traceback to the
316 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
317 instead of --nocolor.
318
319 10 May 2005; Preston Cody <codeman@gentoo.org>
320 Added GLIGenDialog.py to make a generic class for the dialog functions that
321 can be used by both dialogfe and the netfe/be. updated both for new filename.
322 date changes. 2004->2005.
323
324 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
325 Removed 'quiet=True' from spawn() calls
326
327 10 May 2005; Preston Cody <codeman@gentoo.org>
328 Updated GLIUtility with patches from chotchki. Also added documentation
329
330 9 May 2005; Preston Cody <codeman@gentoo.org>
331 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
332 Updated _edit_config in ArchTemplate, make_config, and various other fixes
333 from bug #89683, mostly touchups.
334
335 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
336 GLIStorageDevice cleanup patch from bug #91761
337
338 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
339 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
340 _edit_config(). Error logging casts 'error' to str
341
342 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
343 Exceptions received in CC are logged before being passed to the FE. Added
344 code to CC to handle exceptions *not* thrown by the installer itself.
345
346 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
347 get_max_mb_for_resize() returns -1 if not self.resizeable
348
349 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
350 More dirty rsync hacks :-/
351
352 29 Apr 2005; Preston Cody <codeman@gentoo.org>
353 Patches from chotchki (bug #90325) to improve CC networking. untested.
354
355 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
356 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
357 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
358 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
359 GLIStorageDevice as suggested by pychecker. Fix minor bug in
360 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
361 _get_packages_to_emerge()
362
363 28 Apr 2005; Preston Cody <codeman@gentoo.org>
364 Added group-adding code to set_users in ArchTemplate
365
366 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
367 Added post-install script code
368
369 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
370 Fixed encapsulation issues in GLIClientController (bug #90141)
371
372 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
373 Update resizing code in GLIStorageDevice
374
375 17 Apr 2005; Preston Cody <codeman@gentoo.org>
376 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
377
378 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
379 Reverted change to ArchTemplate and added support for commented line in old
380 code.
381
382 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
383 Changed _edit_config() to modify value in-place instead of commenting out and
384 adding the new value to the end of the file.
385
386 15 Apr 2005; Preston Cody <codeman@gentoo.org>
387 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
388 Also updated TODO list.
389
390 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
391 Use blackace's one-liner to add comments for all function for use with
392 pythondoc.
393
394 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
395 Moved 'end >= device_sectors' check out of loop to check for next partition's
396 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
397 Partitioning code now tracks start/end of extended for placing logicals. End
398 point of logical is now adjusted along with start.
399
400 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
401 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
402 the way of partitioning from a blank disk. Add int() around access to minor
403 key in partition information due to new partition code leaving them as float.
404
405 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
406 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
407
408 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
409 Major GLIStorageDevice overhaul...all MB now instead of sectors.
410
411 8 Apr 2005; Scott Myron <samyron@gentoo.org>
412 Added support for DHCP options and MAC addresses in the InstallProfile.
413
414 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
415 Changed mountopts check to work for blank and whitespace. Pipe emerge through
416 sed to properly strip out junk.
417
418 2 Apr 2005; Preston Cody <codeman@gentoo.org>
419 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
420 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
421
422 31 Mar 2005; Preston Cody <codeman@gentoo.org>
423 Fixed indent problem in GLICController
424
425 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
426 Check for disklabel type "loop" and use the device name without a minor.
427
428 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
429 Remove /tmp/compile_output.log and /var/log/install.log when install is
430 complete. Added code to (hopefully) keep 2nd thread running after install.
431 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
432 get_eth_info() function. Remove most of content in amd64ArchTemplate and
433 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
434
435 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
436 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
437 when unpacking tarball.
438
439 28 Mar 2005; Preston Cody <codeman@gentoo.org>
440 rewrote filesystem_tools. looks like it works so ripping out all the old
441 filesystem_tools code.
442
443 26 Mar 2005; Preston Cody <codeman@gentoo.org>
444 Changed the print statements to logging in the partitioning BE code.
445 the logger may need to be imported to the x86archtemplate. unknown yet.
446 Added the finishing_cleanup function.
447 added a fix to the logger from BenUrban
448
449 25 Mar 2005; Preston Cody <codeman@gentoo.org>
450 changed InstallProfile to remove is_uri check on kernel, stage, and portage
451 URIs. The blank uri check has been commented out.
452 ripped out error checking of set_services. this is done by _add_to_runlevel.
453
454 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
455 set_stage_tarball_uri() doesn't raise an exception on a blank string.
456
457 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
458 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
459 the install profile if available. Commented out spawn() debugging prints
460
461 23 Mar 2005; Preston Cody <codeman@gentoo.org>
462 small changes to setup_network_post. moved adding to runlevel of net.x to
463 after the device gets symlinked. added domainname runlevel command.
464
465 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
466 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
467 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
468 spawn() call in livecd-kernel code to pass environment variables.
469 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
470 the install profile if available.
471
472 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
473 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
474 to handle installing the livecd kernel into the new system.
475
476 22 Mar 2005; Preston Cody <codeman@gentoo.org>
477 should emerge hotplug and coldplug before adding them to runlevel.
478
479 21 Mar 2005; Preston Cody <codeman@gentoo.org>
480 took chroot out of grub_install command.
481
482 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
483 Changed chroot wrapper code in spawn() to write the wrapper the python way
484 instead of the bash way to avoid quote conflicts. Added
485 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
486 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
487 as it breaks the piping.
488
489 20 Mar 2005; Preston Cody <codeman@gentoo.org>
490 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
491
492 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
493 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
494 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
495 GLIInstallProfile.
496
497 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
498 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
499 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
500 into /mnt/gentoo in prepare_chroot()
501
502 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
503 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
504 retarted behavior regarding threads and signals. Add code to convert MB/%/*
505 to start/end sectors
506
507 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
508 Add 2>&1 to cmd in spawn()
509
510 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
511 Modified GLIUtility.exitsuccess() to work with return value from
512 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
513 creates wrapper script for commands run inside chroot so multiple commands
514 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
515 for the generated script from spawn()
516
517 16 Mar 2005; Preston Cody <codeman@gentoo.org>
518 Removed default values for stage tarball URI and portage tree URI from
519 InstallProfile. These should be set by the FEs. also added services step to
520 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
521 Possibly fixed CC DHCP bug with -n. (thx agaffney)
522
523 14 Mar 2005; Preston Cody <codeman@gentoo.org>
524 Small fix for setting the default gateway. Also added feature to dialogfe.
525
526 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
527 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
528
529 1 Mar 2005; Preston Cody <codeman@gentoo.org>
530 Fixed a bunch of true -> True typos. lots of em
531 only write new resolv.conf if there are dns servers listed.
532
533 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
534 Commented out 'display_on_tty8=True' in start_portmap()
535
536 18 Feb 2005; Preston Cody <codeman@gentoo.org>
537 added progress bar to dialogfe and fix logger bug in ArchTemplate.
538
539 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
540 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
541 lang parameter to __init__()
542
543 10 Feb 2005; Preston Cody <codeman@gentoo.org>
544 updates to TODO list.
545
546 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
547 Initial code for quickpkg GRP support. Fix loop to grab packages from
548 'emerge -p blah'
549
550 6 Feb 2005; Preston Cody <codeman@gentoo.org>
551 check for dhcp in the network stuff and emerge it if it is.
552 added quickpkg to TODO list
553
554 5 Feb 2005; Preston Cody <codeman@gentoo.org>
555 Changed the raising of 'warning' exceptions to a simple log of the error
556 so that the installer can continue.
557
558 3 Feb 2005; Preston Cody <codeman@gentoo.org>
559 Some big changes. First, changed most output to display_on_tty8.
560 Second, added log lines to all templates. Some smaller fixes such as typos.
561 Also did some cleanups of old commented lines.
562
563 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
564 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
565 Undo change with fix. Escaping fix in GLIStorageDevice.py
566
567 31 Jan 2005; Preston Cody <codeman@gentoo.org>
568 more updates to TODO list. hopefully we'll soon start removing items instead
569 of adding them.
570
571 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
572 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
573
574 27 Jan 2005; Preston Cody <codeman@gentoo.org>
575 updated TODO list. (again)
576
577 25 Jan 2005; Preston Cody <codeman@gentoo.org>
578 changed output of portmap start to display_on_tty8.
579 fixed bootloader for udev and multiple kernels
580 fixed custom kernel config (again)
581
582 22 Jan 2005; Preston Cody <codeman@gentoo.org>
583 changed default value of CC._enable_ssh to True because this is smart.
584 added code to allow custom kernel .config. may be unstable and break. sorry.
585
586 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
587 partition() now waits until after it checks for partition flags before delete
588 the partitions :P
589
590 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
591 Updated TODO. swapon failure it temporarily not an error. swapon is an error
592 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
593 blank.
594
595 19 Jan 2005; Preston Cody <codeman@gentoo.org>
596 Various fixes related to the add_users function. Still not yet finished.
597 Added things to the TODO list. Lets start using that!
598
599 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
600 Added code to x86Template to format newly created partitions. Also added
601 some error checking code. GLIStorageDevice passes 'minor' with data to
602 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
603 mounting code.
604
605 18 Jan 2005; Preston Cody <codeman@gentoo.org>
606 Took out unnecessary setting of random livecd root password. the cd already
607 sets it randomly.
608
609 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
610 Took out an unneeded step from CC's run()
611
612 15 Jan 2005; Preston Cody <codeman@gentoo.org>
613 Attempt at detecting and adding windows partitions to lilo.
614
615 14 Jan 2005; Preston Cody <codeman@gentoo.org>
616 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
617 partition. fixed misc exit_status => exitstatus typo.
618
619 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
620 Added basic code for resizing filesystems with pyparted. Fixed code for
621 resizing ntfs and ext2/3.
622
623 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
624 Fixed partition() in x86Template so that it scans through logicals and deletes
625 before deleting containing extended partition. Also clears partition table to
626 be safe before third pass.
627
628 08 Jan 2005; Preston Cody <codeman@gentoo.org>
629 Added mount_network_shares. not able to test it from this computer.
630 will test when i get back to school.
631 also added start_portmap to the client_controller as an always-do.
632 agaffney says this is needed for NFS mounts to work.
633
634 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
635 Partial rewrite of partitioning code in x86Template. No longer shells out to
636 parted to perform actions, now uses all pyparted calls. Code "works" in a
637 test, but still needs lots of TLC. Also modified tests/install.py to work
638 with x86Template and GLIClientConfiguration.
639
640 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
641 Initial move of partitioning code from ArchTemplate to x86Template.
642
643 07 Jan 2005; Preston Cody <codeman@gentoo.org>
644 Added grp_install and services to InstallProfile. forgot about the set_root_password
645
646 07 Jan 2005; Preston Cody <codeman@gentoo.org>
647 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
648 Test Install ran very well (skipping partitioning).
649
650 05 Jan 2005; Preston Cody <codeman@gentoo.org>
651 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
652 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
653 some may still have eluded me.
654
655 05 Jan 2005; Preston Cody <codeman@gentoo.org>
656 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
657 Just finished mount_local_partitions in GLIArchitectureTemplate
658
659 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
660 Added get_num_sectors() to GLIStorageDevice.
661
662 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
663 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
664 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
665 from GLIInstallProfile.
666
667 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
668 GLIStorageDevice returns "unknown" instead of "" for get_type()
669
670 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
671 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
672 actually work. Commented out resizability checking code for speed.
673
674 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
675 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
676 GLIStorageDevice at the suggestion of plors
677
678 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
679 Added a function to GLIUtility to pull a value from a make.conf-style config
680 file. Minor type fix to GLIInstallProfile.py
681
682 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
683 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
684 network mounts from partition data structure in GLIInstallProfile
685
686 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
687 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
688 can be resized.
689
690 27 Oct 2004; Preston Cody <codeman@gentoo.org>
691 Added some of the final functions to GLIInstallTemplate.
692 Yes this project is still active despite rare use of the Changelog!
693
694 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
695 Added the GLIPartitionTools.py file. This is a temporary insertion of
696 partitioning tools that will eventually go into their own package.
697
698 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
699 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
700 for the program). Added __init__(install_profile, client_configuration) to
701 GLI.InstallProfile. This sets install_profile and client_configuration once so as
702 to avoid constantly passing stuff every time we call a method.
703
704 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
705
706 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
707 files without messing up all the other stuff in them. This will be used for making
708 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
709
710 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
711
712 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
713 have a few basic things. I added two private methods. One is _depends(). This
714 will be used for dependency checking (ie. unpacking a tarball requires that
715 partitioning has been done). The other is _exec_in_chroot(). This is the exact
716 same syntax as os.system(), however, instead of being run in the liveCD
717 environment, it runs in the chroot. This requires a bit of fork() magic, so I
718 isolated the code. Hope to work more this week to get this class formed...
719
720 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
721
722 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
723 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
724 to allow for easier modification (mutable, rather than immutable objects). Updated
725 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
726 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
727 Added initial unit test code.
728
729 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
730
731 Added initial changelog. Setting up the basic structure of the CVS repository
732 for the project. Added the UML class diagram in docs. Added a skeletal GLI
733 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20