/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 723 - (show annotations) (download)
Tue Jun 28 20:57:21 2005 UTC (9 years ago) by codeman
File size: 33375 byte(s)
added dialog.py to the fe/dialog directory so it actually gets used.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.271 2005/06/28 20:57:21 codeman Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
8 Add code to update_config_files() to go through etc_files and update stuff.
9 Check to see that _etc_files['make.conf'] exists in get_make_conf()
10
11 28 Jun 2005; Preston Cody <codeman@gentoo.org>
12 finished almost all internationalization of GenDialog.
13 attempt at fixing rc.conf function. moved 3 generate functions out of
14 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
15 added dialog.py to the fe/dialog directory so it actually gets used.
16
17 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
18 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
19
20 27 Jun 2005; Preston Cody <codeman@gentoo.org>
21 fix extra entry in list_mirrors()
22 beginning internationalization runthrough.
23
24 26 Jun 2005; Preston Cody <codeman@gentoo.org>
25 added dialog.py to /src temporarily until it gets accepted upstream.
26 fix for unused value in form in dialog.py and changed heights.
27 fix GenDialog forms.
28
29 25 Jun 2005; Preston Cody <codeman@gentoo.org>
30 Changed hostname/domainname for new baselayout.
31 Changed _add_to_runlevel errors to logs.
32 Updated TODO list to show status of GenDialog
33 More updates to GenDialog including two checklists that probably won't work.
34 update IP to use comma-separated list instead of space separated for services.
35
36 24 Jun 2005; Preston Cody <codeman@gentoo.org>
37 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
38 GenDialog as it gets closer to completion.
39
40 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
41 Modify get_eth_info() to take a full interface name (eth0 fex). float()
42 instead of int() in add_partition_device_partition() for minor (closes 96804)
43
44 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
45 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
46 instead of 'interfaces[interface][1]' since DHCP uses that field for its
47 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
48
49 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
50 Apply spawn() patch from #96644 (with minor changes). Make sure the return
51 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
52 small error with <pipe>.close() returning None. Fix space vs. tab issue.
53 Fix undefined variable 'output' issue in spawn().
54
55 20 Jun 2005; Preston Cody <codeman@gentoo.org>
56 More updates to GenDialog and gli-d.
57
58 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
59 Modify list_mirrors() to return a list of mirror URL/name pairs.
60
61 19 Jun 2005; Preston Cody <codeman@gentoo.org>
62 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
63 get subarch.
64
65 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
66 Backend partitioning will create disklabel is none exists. Installprofile
67 defaults to "" now instead of "msdos" for disklabel type. Fix for
68 mount_local_partitions() to remember device along with minor in the
69 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
70 add else block to log unsupported netmount types to mount_network_shares()
71
72 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
73 src/GLIArchitectureTemplate.py:
74 Refactor kernel_compile common stuff, fix 2.4 build process.
75 src/fe/cli/clife.py:
76 Logging system.
77 src/GLIUtility.py, src/GLIStorageDevice.py:
78 Add comments about re-writes needed for boxes without sysfs.
79
80 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
81 src/GLIArchitectureTemplate.py:
82 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
83 'make dep' call for custom compile. build_mode support for prepare-only and
84 none types completed. custom compile function chains shell functions in
85 spawned script, to allow for catching all errors.
86
87 15 Jun 2005; Preston Cody <codeman@gentoo.org>
88 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
89 and GenDialog. other gendialog updates as well. kernel updates untested.
90
91 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
92 src/GLIInstallProfile.py:
93 Change structure of etc-portage stuff. The serialization was broken before my
94 last commit, and I am the only person that's ever used it. The new schema is
95 as follows:
96 <etc-portage>
97 <file name="package.mask"/>
98 <file name="package.unmask">
99 <entry atom="sys-kernel/openmosix-sources"/>
100 </file>
101 <file name="package.use">
102 <entry atom="sys-libs/db">
103 -java
104 </entry>
105 <entry atom="dev-libs/cyrus-sasl">
106 -ldap
107 </entry>
108 </file>
109 </etc-portage>
110
111
112 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
113 src/GLIInstallProfile.py:
114 Add new entry for gli-profile/kernel-build-method item. Add missing
115 serialize_etc_portage (temporary). Make serialize_make_conf always print the
116 keys in the same order.
117
118 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
119 src/GLIArchitectureTemplate.py:
120 Clean up commenting used by _edit_config(), and fix bug where wrong comment
121 was repeatedly appended to make.conf.
122
123 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
124 src/GLIArchitectureTemplate.py:
125 Put some Linux-2.6 specific code under a if statement. Store list of
126 successfully mounted swap device for using swapoff. Add proper error checking
127 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
128 'file'. Clean up some redundant code (thanks to pychecker).'
129
130 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
131 Fix typos: get_extended() instead of get_extended_partition(). Added
132 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
133 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
134
135 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
136 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
137 in add_network_interface.
138
139 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
140 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
141 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
142 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
143 prepare_chroot.
144
145 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
146 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
147 +src/fe/installer-gtk:
148 Add new automated CLI frontend. Add scripts that are the intended means to
149 use each frontend.
150
151 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
152 src/GLIClientController.py:
153 Add null type to network config, for cases where the interface is already up
154 and should not be touched (netboot for example).
155
156 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
157 src/GLIArchitectureTemplate.py:
158 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
159 string!. Try to use binary packages if available by default.
160
161 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
162 src/GLIArchitectureTemplate.py:
163 More error checking for _add_to_runlevel, to ensure that the init script
164 actually exists before we try to add it. set_services phase must take place
165 after the package installation, otherwise the init scripts might not exist.
166 Find the correct init script for the cron and logging daemons, and add that
167 instead of the package atom.
168
169 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
170 src/GLIArchitectureTemplate.py:
171 Fix up _edit_config so that it works if the file doesn't already exist. Fix
172 usage of 'file' to 'contents' for the variable name, as it shadows
173 __builtin__.file.
174
175 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
176 src/GLIArchitectureTemplate.py:
177 Add MTA install code, and include MTA install phase. Ensure
178 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
179 for 'none' kernel config for build_kernel phase. Put kernel_script in
180 /var/tmp instead of /root for build_kernel phase.
181
182 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
183 Rename mta variables to match syslog/cron variables.
184
185 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
186 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
187 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
188 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
189 src/templates/.cvsignore, src/tests/.cvsignore:
190 Refactor partition formatting again to include error checking. Allow 'none'
191 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
192
193 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
194 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
195 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
196 only have a single spawn call.
197
198 11 Jun 2005; Preston Cody <codeman@gentoo.org>
199 refixed samyron's fix of set_architecture_template.
200
201 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
202 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
203 be executable.
204
205 10 Jun 2005; Scott Myron <samyron@gentoo.org>
206 Fixed one of the FIXME's in the ClientConfiguration. There is now some
207 error checking when you call set_architecture_template.
208
209 10 Jun 2005; Preston Cody <codeman@gentoo.org>
210 moved the mkfsopts input to the partition options menu instead of the during
211 the creation process. updated GenDialog to say it supports reiserfs v3.
212
213 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
214 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
215 Complete support for 'mkfsopts' parameter in main system and dialogfe.
216 Add support for other partition types to dialogfe.
217 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
218 avoid integer overflows and wraparounds.
219
220 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
221 Removed start/end from XML output and added mkfsopts to partitioning info.
222 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
223 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
224 in GLIClientConfiguration. Change from .1 and .9 to constants for
225 partitioning. Fix free space overwriting bug. Remove a few unused functions
226 from rewrite. Fix call to get_partition_at()
227
228 8 Jun 2005; Preston Cody <codeman@gentoo.org>
229 Updates to GenDialog and dialogfe.
230
231 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
232 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
233
234 6 Jun 2005; Preston Cody <codeman@gentoo.org>
235 more GenDialog updates to partitioning.
236
237 5 Jun 2005; Preston Cody <codeman@gentoo.org>
238 Indenting issue in GLISD/get_ordered_partition_list.
239 updates to GenDialog partitioning and added default UTC for timezone in IP.
240
241 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
242 Added GLISD.get_model()
243
244 3 Jun 2005; Preston Cody <codeman@gentoo.org>
245 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
246 More updates to GenDialog :)
247
248 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
249 Added get_interface_realname() function.
250
251 2 Jun 2005; Preston Cody <codeman@gentoo.org>
252 Added auto-save of CConfig and copying to new /root after install.
253 yet even more GenDialog updates.
254
255 1 Jun 2005; Preston Cody <codeman@gentoo.org>
256 removed print statement from GLISD. more updates to GenDialog.
257
258 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
259 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
260 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
261 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
262 places in GLIClientConfiguration.
263
264 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
265 Fix mount_local_partitions(), configure_fstab(), and
266 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
267 A few more fixes for templates/x86Archtemplate
268
269 27 May 2005; Preston Cody <codeman@gentoo.org>
270 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
271 a work in progress.
272
273 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
274 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
275 directly. GLISD can now handle data imported from XML.
276
277 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
278 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
279 handle blank (no disklabel) disks.
280
281 20 May 2005; Preston Cody <codeman@gentoo.org>
282 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
283 up, documented, and separated out serialization and grouped all sections.
284
285 19 May 2005; Preston Cody <codeman@gentoo.org>
286 Reorganization of ClientConfiguration and gutting of unused functions.
287 Removed verbose option from CC. Moved import statement in IP and CConfig up.
288
289 18 May 2005; Preston Cody <codeman@gentoo.org>
290 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
291
292 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
293 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
294 partitioning. CC serializes install profile to disk and prepare_chroot()
295 copies it into /mnt/gentoo/root
296
297 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
298 Moved URI parsing into new function parse_uri()
299
300 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
301 Added XMLParser module.
302
303 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
304 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
305 Minor fix to is_uri() regex to allow hyphens in hostname.
306
307 12 May 2005; Preston Cody <codeman@gentoo.org>
308 Updated finishing_cleanup for new unmounting method from agaffney.
309
310 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
311 Fix GLILogger to use correct time format string. Fix _edit_config() to
312 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
313 unicode support to is_realstring().
314
315 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
316 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
317 return value instead of non-zero. Add code to output a traceback to the
318 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
319 instead of --nocolor.
320
321 10 May 2005; Preston Cody <codeman@gentoo.org>
322 Added GLIGenDialog.py to make a generic class for the dialog functions that
323 can be used by both dialogfe and the netfe/be. updated both for new filename.
324 date changes. 2004->2005.
325
326 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
327 Removed 'quiet=True' from spawn() calls
328
329 10 May 2005; Preston Cody <codeman@gentoo.org>
330 Updated GLIUtility with patches from chotchki. Also added documentation
331
332 9 May 2005; Preston Cody <codeman@gentoo.org>
333 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
334 Updated _edit_config in ArchTemplate, make_config, and various other fixes
335 from bug #89683, mostly touchups.
336
337 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
338 GLIStorageDevice cleanup patch from bug #91761
339
340 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
341 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
342 _edit_config(). Error logging casts 'error' to str
343
344 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
345 Exceptions received in CC are logged before being passed to the FE. Added
346 code to CC to handle exceptions *not* thrown by the installer itself.
347
348 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
349 get_max_mb_for_resize() returns -1 if not self.resizeable
350
351 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
352 More dirty rsync hacks :-/
353
354 29 Apr 2005; Preston Cody <codeman@gentoo.org>
355 Patches from chotchki (bug #90325) to improve CC networking. untested.
356
357 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
358 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
359 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
360 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
361 GLIStorageDevice as suggested by pychecker. Fix minor bug in
362 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
363 _get_packages_to_emerge()
364
365 28 Apr 2005; Preston Cody <codeman@gentoo.org>
366 Added group-adding code to set_users in ArchTemplate
367
368 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
369 Added post-install script code
370
371 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
372 Fixed encapsulation issues in GLIClientController (bug #90141)
373
374 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
375 Update resizing code in GLIStorageDevice
376
377 17 Apr 2005; Preston Cody <codeman@gentoo.org>
378 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
379
380 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
381 Reverted change to ArchTemplate and added support for commented line in old
382 code.
383
384 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
385 Changed _edit_config() to modify value in-place instead of commenting out and
386 adding the new value to the end of the file.
387
388 15 Apr 2005; Preston Cody <codeman@gentoo.org>
389 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
390 Also updated TODO list.
391
392 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
393 Use blackace's one-liner to add comments for all function for use with
394 pythondoc.
395
396 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
397 Moved 'end >= device_sectors' check out of loop to check for next partition's
398 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
399 Partitioning code now tracks start/end of extended for placing logicals. End
400 point of logical is now adjusted along with start.
401
402 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
403 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
404 the way of partitioning from a blank disk. Add int() around access to minor
405 key in partition information due to new partition code leaving them as float.
406
407 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
408 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
409
410 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
411 Major GLIStorageDevice overhaul...all MB now instead of sectors.
412
413 8 Apr 2005; Scott Myron <samyron@gentoo.org>
414 Added support for DHCP options and MAC addresses in the InstallProfile.
415
416 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
417 Changed mountopts check to work for blank and whitespace. Pipe emerge through
418 sed to properly strip out junk.
419
420 2 Apr 2005; Preston Cody <codeman@gentoo.org>
421 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
422 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
423
424 31 Mar 2005; Preston Cody <codeman@gentoo.org>
425 Fixed indent problem in GLICController
426
427 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
428 Check for disklabel type "loop" and use the device name without a minor.
429
430 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
431 Remove /tmp/compile_output.log and /var/log/install.log when install is
432 complete. Added code to (hopefully) keep 2nd thread running after install.
433 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
434 get_eth_info() function. Remove most of content in amd64ArchTemplate and
435 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
436
437 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
438 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
439 when unpacking tarball.
440
441 28 Mar 2005; Preston Cody <codeman@gentoo.org>
442 rewrote filesystem_tools. looks like it works so ripping out all the old
443 filesystem_tools code.
444
445 26 Mar 2005; Preston Cody <codeman@gentoo.org>
446 Changed the print statements to logging in the partitioning BE code.
447 the logger may need to be imported to the x86archtemplate. unknown yet.
448 Added the finishing_cleanup function.
449 added a fix to the logger from BenUrban
450
451 25 Mar 2005; Preston Cody <codeman@gentoo.org>
452 changed InstallProfile to remove is_uri check on kernel, stage, and portage
453 URIs. The blank uri check has been commented out.
454 ripped out error checking of set_services. this is done by _add_to_runlevel.
455
456 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
457 set_stage_tarball_uri() doesn't raise an exception on a blank string.
458
459 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
460 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
461 the install profile if available. Commented out spawn() debugging prints
462
463 23 Mar 2005; Preston Cody <codeman@gentoo.org>
464 small changes to setup_network_post. moved adding to runlevel of net.x to
465 after the device gets symlinked. added domainname runlevel command.
466
467 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
468 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
469 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
470 spawn() call in livecd-kernel code to pass environment variables.
471 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
472 the install profile if available.
473
474 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
475 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
476 to handle installing the livecd kernel into the new system.
477
478 22 Mar 2005; Preston Cody <codeman@gentoo.org>
479 should emerge hotplug and coldplug before adding them to runlevel.
480
481 21 Mar 2005; Preston Cody <codeman@gentoo.org>
482 took chroot out of grub_install command.
483
484 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
485 Changed chroot wrapper code in spawn() to write the wrapper the python way
486 instead of the bash way to avoid quote conflicts. Added
487 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
488 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
489 as it breaks the piping.
490
491 20 Mar 2005; Preston Cody <codeman@gentoo.org>
492 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
493
494 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
495 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
496 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
497 GLIInstallProfile.
498
499 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
500 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
501 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
502 into /mnt/gentoo in prepare_chroot()
503
504 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
505 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
506 retarted behavior regarding threads and signals. Add code to convert MB/%/*
507 to start/end sectors
508
509 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
510 Add 2>&1 to cmd in spawn()
511
512 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
513 Modified GLIUtility.exitsuccess() to work with return value from
514 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
515 creates wrapper script for commands run inside chroot so multiple commands
516 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
517 for the generated script from spawn()
518
519 16 Mar 2005; Preston Cody <codeman@gentoo.org>
520 Removed default values for stage tarball URI and portage tree URI from
521 InstallProfile. These should be set by the FEs. also added services step to
522 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
523 Possibly fixed CC DHCP bug with -n. (thx agaffney)
524
525 14 Mar 2005; Preston Cody <codeman@gentoo.org>
526 Small fix for setting the default gateway. Also added feature to dialogfe.
527
528 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
529 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
530
531 1 Mar 2005; Preston Cody <codeman@gentoo.org>
532 Fixed a bunch of true -> True typos. lots of em
533 only write new resolv.conf if there are dns servers listed.
534
535 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
536 Commented out 'display_on_tty8=True' in start_portmap()
537
538 18 Feb 2005; Preston Cody <codeman@gentoo.org>
539 added progress bar to dialogfe and fix logger bug in ArchTemplate.
540
541 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
542 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
543 lang parameter to __init__()
544
545 10 Feb 2005; Preston Cody <codeman@gentoo.org>
546 updates to TODO list.
547
548 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
549 Initial code for quickpkg GRP support. Fix loop to grab packages from
550 'emerge -p blah'
551
552 6 Feb 2005; Preston Cody <codeman@gentoo.org>
553 check for dhcp in the network stuff and emerge it if it is.
554 added quickpkg to TODO list
555
556 5 Feb 2005; Preston Cody <codeman@gentoo.org>
557 Changed the raising of 'warning' exceptions to a simple log of the error
558 so that the installer can continue.
559
560 3 Feb 2005; Preston Cody <codeman@gentoo.org>
561 Some big changes. First, changed most output to display_on_tty8.
562 Second, added log lines to all templates. Some smaller fixes such as typos.
563 Also did some cleanups of old commented lines.
564
565 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
566 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
567 Undo change with fix. Escaping fix in GLIStorageDevice.py
568
569 31 Jan 2005; Preston Cody <codeman@gentoo.org>
570 more updates to TODO list. hopefully we'll soon start removing items instead
571 of adding them.
572
573 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
574 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
575
576 27 Jan 2005; Preston Cody <codeman@gentoo.org>
577 updated TODO list. (again)
578
579 25 Jan 2005; Preston Cody <codeman@gentoo.org>
580 changed output of portmap start to display_on_tty8.
581 fixed bootloader for udev and multiple kernels
582 fixed custom kernel config (again)
583
584 22 Jan 2005; Preston Cody <codeman@gentoo.org>
585 changed default value of CC._enable_ssh to True because this is smart.
586 added code to allow custom kernel .config. may be unstable and break. sorry.
587
588 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
589 partition() now waits until after it checks for partition flags before delete
590 the partitions :P
591
592 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
593 Updated TODO. swapon failure it temporarily not an error. swapon is an error
594 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
595 blank.
596
597 19 Jan 2005; Preston Cody <codeman@gentoo.org>
598 Various fixes related to the add_users function. Still not yet finished.
599 Added things to the TODO list. Lets start using that!
600
601 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
602 Added code to x86Template to format newly created partitions. Also added
603 some error checking code. GLIStorageDevice passes 'minor' with data to
604 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
605 mounting code.
606
607 18 Jan 2005; Preston Cody <codeman@gentoo.org>
608 Took out unnecessary setting of random livecd root password. the cd already
609 sets it randomly.
610
611 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
612 Took out an unneeded step from CC's run()
613
614 15 Jan 2005; Preston Cody <codeman@gentoo.org>
615 Attempt at detecting and adding windows partitions to lilo.
616
617 14 Jan 2005; Preston Cody <codeman@gentoo.org>
618 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
619 partition. fixed misc exit_status => exitstatus typo.
620
621 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
622 Added basic code for resizing filesystems with pyparted. Fixed code for
623 resizing ntfs and ext2/3.
624
625 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
626 Fixed partition() in x86Template so that it scans through logicals and deletes
627 before deleting containing extended partition. Also clears partition table to
628 be safe before third pass.
629
630 08 Jan 2005; Preston Cody <codeman@gentoo.org>
631 Added mount_network_shares. not able to test it from this computer.
632 will test when i get back to school.
633 also added start_portmap to the client_controller as an always-do.
634 agaffney says this is needed for NFS mounts to work.
635
636 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
637 Partial rewrite of partitioning code in x86Template. No longer shells out to
638 parted to perform actions, now uses all pyparted calls. Code "works" in a
639 test, but still needs lots of TLC. Also modified tests/install.py to work
640 with x86Template and GLIClientConfiguration.
641
642 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
643 Initial move of partitioning code from ArchTemplate to x86Template.
644
645 07 Jan 2005; Preston Cody <codeman@gentoo.org>
646 Added grp_install and services to InstallProfile. forgot about the set_root_password
647
648 07 Jan 2005; Preston Cody <codeman@gentoo.org>
649 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
650 Test Install ran very well (skipping partitioning).
651
652 05 Jan 2005; Preston Cody <codeman@gentoo.org>
653 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
654 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
655 some may still have eluded me.
656
657 05 Jan 2005; Preston Cody <codeman@gentoo.org>
658 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
659 Just finished mount_local_partitions in GLIArchitectureTemplate
660
661 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
662 Added get_num_sectors() to GLIStorageDevice.
663
664 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
665 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
666 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
667 from GLIInstallProfile.
668
669 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
670 GLIStorageDevice returns "unknown" instead of "" for get_type()
671
672 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
673 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
674 actually work. Commented out resizability checking code for speed.
675
676 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
677 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
678 GLIStorageDevice at the suggestion of plors
679
680 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
681 Added a function to GLIUtility to pull a value from a make.conf-style config
682 file. Minor type fix to GLIInstallProfile.py
683
684 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
685 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
686 network mounts from partition data structure in GLIInstallProfile
687
688 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
689 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
690 can be resized.
691
692 27 Oct 2004; Preston Cody <codeman@gentoo.org>
693 Added some of the final functions to GLIInstallTemplate.
694 Yes this project is still active despite rare use of the Changelog!
695
696 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
697 Added the GLIPartitionTools.py file. This is a temporary insertion of
698 partitioning tools that will eventually go into their own package.
699
700 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
701 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
702 for the program). Added __init__(install_profile, client_configuration) to
703 GLI.InstallProfile. This sets install_profile and client_configuration once so as
704 to avoid constantly passing stuff every time we call a method.
705
706 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
707
708 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
709 files without messing up all the other stuff in them. This will be used for making
710 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
711
712 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
713
714 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
715 have a few basic things. I added two private methods. One is _depends(). This
716 will be used for dependency checking (ie. unpacking a tarball requires that
717 partitioning has been done). The other is _exec_in_chroot(). This is the exact
718 same syntax as os.system(), however, instead of being run in the liveCD
719 environment, it runs in the chroot. This requires a bit of fork() magic, so I
720 isolated the code. Hope to work more this week to get this class formed...
721
722 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
723
724 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
725 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
726 to allow for easier modification (mutable, rather than immutable objects). Updated
727 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
728 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
729 Added initial unit test code.
730
731 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
732
733 Added initial changelog. Setting up the basic structure of the CVS repository
734 for the project. Added the UML class diagram in docs. Added a skeletal GLI
735 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20