Contents of /trunk/autoconfig

#!/sbin/runscript

DHCP="yes"
DETECT="yes"
GPM="yes"
PCMCIA="no"
HOTPLUG="yes"
APM="no"
ACPI="no"
IDEDMA="yes"
ALSA="yes"
X11="yes"

get_config() {
        CMDLINE="$(cat /proc/cmdline)"

        for x in ${CMDLINE} ; do
                case "${x}" in
                        nodetect)
                                DETECT="no"
                                GPM="no"
                                HOTPLUG="no"
                                APM="no"
                                ACPI="no"
                                ALSA="no"
                                X11="no"
                        ;;
                        nodhcp)
                                DHCP="no"
                        ;;
                        nogpm)
                                GPM="no"
                        ;;
                        dopcmcia)
                                PCMCIA="yes"
                        ;;
                        doapm)
                                APM="yes"
                                ACPI="no"
                        ;;
                        acpi\=on|acpi\=force)
                                APM="no"
                                ACPI="yes"
                        ;;
                        ide\=nodma)
                                IDEDMA="no"
                        ;;
                        nohotplug)
                                HOTPLUG="no"
                        ;;
                        nosound)
                                ALSA="no"
                        ;;
                        nox)
                                X11="no"
                        ;;
                esac
        done
}

depend() {
        need modules
        before net
#       provide gpm pcmcia apmd acpid coldplug hdparm alsasound mkxf86config x-setup
}

# Checks whether a service will be started by autoconfig.
# Usage: check_svc var service [service_alternative]
check_svc() {
        if [ "${1}" = "yes" ]
        then
                if [ -x "/etc/init.d/${2}" ]
                then
                        echo "${2}"
                elif [ -n "${3}" -a -x "/etc/init.d/${3}" ]
                then
                        echo "${3}"
                fi      
        fi      
}

# Prints an ordered list of services that will be started by autoconfig.
list_services() {
        get_config

        local svcs="$(check_svc ${APM} apmd)"
        svcs="${svcs} $(check_svc ${ACPI} acpid)"
        svcs="${svcs} $(check_svc ${IDEDMA} hdparm)"
        svcs="${svcs} $(check_svc ${PCMCIA} pcmcia)"
        svcs="${svcs} $(check_svc ${GPM} gpm)"
        svcs="${svcs} $(check_svc ${HOTPLUG} coldplug hotplug)"
        svcs="${svcs} $(check_svc ${ALSA} alsasound)"
        svcs="${svcs} $(check_svc ${X11} mkxf86config x-setup)"

        echo ${svcs}
}

unpack_firmware() {
        # This unpacks any firmware tarballs.
        # This has been moved here from coldplug, but might not be very effective
        # since udev does coldplugging in 089 and higher.
        if [ -e /lib/firmware.tar.bz2 ]
        then
                ebegin "Unpacking hotplug firmware"
                tar xjf /lib/firmware.tar.bz2 -C /lib/firmware
                eend 0
        fi
}

get_info() {
        local tmp

        if [ ! -z "${1}" -a ! -z "${2}" ]
        then
                tmp=$(grep "^$1[[:space:]]\+:" /proc/cpuinfo | head -n 1 | cut -d" " -f3-)
#               tmp=$([[ $'\n'$(</proc/cpuinfo) =~ $'\n''$1[[:space:]]\+:' ]] | head -n 1 | cut -d" " -f3-)
                eval "${2}='${tmp}'"
        fi
}

detect_mips() {
        get_info "cpu model" cpuinfo
        get_info "system type" machinfo
        cpuinfo="${cpuinfo%%  FPU*}"

        case "${machinfo}" in
                "SGI Indigo2")
                        case "${cpuinfo}" in
                                R4*)
                                        machinfo="SGI Indigo2" # I2 R4x00
                                ;;
                                R8*)
                                        machinfo="SGI Indigo2 Power" # I2 R8000
                                ;;
                                R10*)
                                        machinfo="SGI Indigo2 Impact" # I2 R10000
                                ;;
                        esac
                ;;
        esac

        PC="Detected an ${machinfo} w/ ${numcpu} ${cpuinfo} CPU(s)"
}

detect_x86_amd64_ia64() {
        if [ "${1}" = "ia64" ]
        then
                get_info "family" cpuinfo
        else
                get_info "model name" cpuinfo
        fi
        get_info "cpu MHz" mhz
        mhz="${mhz%%.*}MHz"

        PC="Detected ${numcpu} ${cpuinfo} CPU(s) @ ${mhz}"
}

detect_alpha() {
        get_info "platform string" machinfo
        get_info "cpu" cpuinfo1
        get_info "cpu model" cpuinfo2
        get_info "cpus detected" numcpu

        PC="Detected ${numcpu} ${cpuinfo1} ${cpuinfo2} CPU(s) in a ${machinfo} system"
}

detect_ppc() {
        get_info "cpu" cpuinfo
        get_info "clock" mhz
        get_info "detected as" machinfo
        machinfo="${machinfo##*\(}"
        machinfo="${machinfo%%\)*}"

        local machtype=""

        case "${machinfo}" in
                "CHRP Pegasos2")
                        machtype="Pegasos 2"
                        ;;
                "CHRP IBM,9124-720")
                        machtype="IBM OP720"
                        ;;
                "iBook 2 rev. 2")
                        machtype="Apple iBook G3"
                        ;;
                "iMac G5"*)
                        machtype="Apple iMac G5"
                        ;;
                "MPC8241")
                        machtype="Kurobox"
                        ;;
                "PowerMac G5")
                        machtype="Apple PowerMac G5"
                        ;;
                "PowerMac G5 Dual Core")
                        machtype="Apple PowerMac G5 Dual Core"
                        ;;
                "PowerMac G4 AGP Graphics")
                        machtype="Apple PowerMac G4"
                        ;;
                "PowerBook Titanium"|'PowerBook G4 15"')
                        machtype="Apple Powerbook G4"
                        ;;
                "Unknown Intrepid-based")
                        machtype="Apple Mac-Mini"
                        ;;
                *)
                        machtype="Unknown PPC System"
                        ;;
        esac

        PC="Detected a(n) ${machtype} w/ ${numcpu} ${cpuinfo} CPU(s)"
}

detect_sparc() {
        get_info "cpu" cpuinfo
        get_info "ncpus active" numcpu
        get_info "ncpus probed" numprobed

        PC="Detected ${numcpu} active ${cpuinfo} CPU(s) of ${numprobed} total"
}

start() {
        echo "0" > /proc/sys/kernel/printk
        get_config

        # First off, we want hotplug/coldplug enabled, so let's re-enable it.
        # We do this even if we aren't startup up the hotplug/coldplug
        # services for the installer.
        sed -i 's/RC_COLDPLUG="no"/RC_COLDPLUG="yes"/' /etc/conf.d/rc
        # Now, we check if we're supposed to run a coldplug script.
        if [ "${HOTPLUG}" = "yes" ]
        then
                # Check whether we should be using hotplug or coldplug
                if [ -x /etc/init.d/coldplug ]
                then
                        start_service coldplug
                elif [ -x /etc/init.d/hotplug ]
                then
                        start_service hotplug
                else
                        unpack_firmware
                        [ -x /sbin/udevtrigger ] && /sbin/udevtrigger
                fi
        else
                ewarn "Hotplug/Coldplug disabled via cmdline ..."
        fi

        if [ "${DETECT}" = "yes" ]
        then
                ebegin "Hardware detection started"
                        local numcpu="$(grep -c '^processor[[:space:]]\+:' /proc/cpuinfo)"
#                       local numcpu=$([[ $'\n'$(</proc/cpuinfo) =~ $'\n''processor[[:space:]]\+:' ]] | wc -l)
                        local arch="$(uname -m)"

                        case ${arch} in
                                mips*)
                                        detect_mips
                                        ACPI="no"
                                        APM="no"
                                        IDEDMA="no"
                                ;;
                                i?86|x86_64)
                                        detect_x86_amd64_ia64
                                ;;
                                alpha)
                                        detect_alpha
                                        ACPI="no"
                                        APM="no"
                                ;;
                                sparc*)
                                        detect_sparc
                                        ACPI="no"
                                        APM="no"
                                ;;
                                powerpc*)
                                        detect_ppc
                                        ACPI="no"
                                        APM="no"
                                ;;
                                ia64)
                                        detect_x86_amd64_ia64 "ia64"
                                        APM="no"
                                ;;
                                *)
                                        PC=
                                ;;
                        esac
                        [ -n "${PC}" ] && einfo "${PC}"
                        [ -x /usr/sbin/hwsetup ] && hwsetup
                eend
        else
                ewarn "Hardware detection disabled via cmdline ..."
        fi

        if [ "${APM}" = "yes" ]
        then
                modprobe apm power_off=1 >/dev/null 2>&1 && \
                        einfo "APM BIOS found, power management functions enabled ..."
                [ -x /etc/init.d/apmd ] && start_service apmd
        else
                einfo "Not Loading APM Bios support ..."
        fi

        if [ "${ACPI}" = "yes" ]
        then
                modprobe processor >/dev/null 2>&1 && \
                        ebegin "ACPI power management functions enabled" && \
                        modprobe thermal >/dev/null
                modprobe fan >/dev/null 2>&1
                modprobe button >/dev/null 2>&1
                modprobe battery >/dev/null 2>&1
                modprobe ac >/dev/null 2>&1
                modprobe thermal >/dev/null 2>&1
                modprobe video >/dev/null 2>&1
                modprobe dock >/dev/null 2>&1
                [ -x /etc/init.d/acpid ] && start_service acpid
                eend
        else
                einfo "Not Loading ACPI support ..."
        fi

        if [ "${IDEDMA}" = "yes" ]
        then
                [ -x /etc/init.d/hdparm ] && start_service hdparm
        fi

        if [ "${PCMCIA}" = "yes" ]
        then
                einfo "PCMCIA enabled via cmdline ..."
                [ -x /etc/init.d/pcmcia ] && start_service pcmcia
        fi

        if [ "${DHCP}" = "no" ]
        then
                sed -i -e '/^ifconfig_eth.*dhcp.*/ s/^/#/' \
                        -e '/^iface_eth.*dhcp.*/ s/^/#/' \
                        -e '/^config_eth.*dhcp.*/ s/^/#/' \
                        /etc/conf.d/net
                for i in `seq 0 4`
                do
                        echo "config_eth$i=( \"none\" )" >> /etc/conf.d/net
                done
                ewarn "Skipping DHCP broadcast detection as requested on boot commandline ..."
        fi

        # Read in what hwsetup has found
        [ -f /etc/sysconfig/gentoo ] && . /etc/sysconfig/gentoo

        # Mouse
        if [ -n "${MOUSE_DEVICE}" ]
        then
                einfo "Mouse is ${HILITE}${MOUSE_FULLNAME}${NORMAL} at ${HILITE}${MOUSE_DEVICE}${NORMAL} ..."
                source /etc/sysconfig/mouse
                if [ -x /usr/sbin/gpm ]
                then
                        if [ $(grep "#MOUSE=${MOUSETYPE}" /etc/conf.d/gpm) ]
#                       if [ $([[ $'\n'$(</etc/conf.d/gpm) =~ $'\n''#MOUSE=${MOUSETYPE}' ]]) ]
                        then
                                sed -i "\@MOUSE=${MOUSETYPE}@s@^#@@" /etc/conf.d/gpm
                        else
                                echo "MOUSE=${MOUSETYPE}" >>/etc/conf.d/gpm
                        fi

                        if [ $(grep "#MOUSEDEV=${DEVICE}" /etc/conf.d/gpm) ]
#                       if [ $([[ $'\n'$(</etc/conf.d/gpm) =~ $'\n''#MOUSEDEV=${DEVICE}' ]]) ]
                        then
                                sed -i "\@MOUSEDEV=${DEVICE}@s@^#@@" /etc/conf.d/gpm
                        else
                                echo "MOUSEDEV=${DEVICE}" >>/etc/conf.d/gpm
                        fi

                        [ "${GPM}" = "yes" ] \
                                && [ -x /etc/init.d/gpm ] && start_service gpm
                fi
        fi

        [ "${DETECT}" = "no" ] && DHCP="no"
        [ "${DETECT}" = "yes" ] \
                && NETDEVICES="$(awk -F: '/eth.:|tr.:|ath.:|wlan.:/{print $1}' /proc/net/dev 2>/dev/null)"

        if [ -n "${NETDEVICES}" ]
        then
                for nics in ${NETDEVICES}
                do
                        if [ "${DHCP}" = "yes" ]
                        then
                                einfo "Network device ${HILITE}${nics}${NORMAL} detected, DHCP broadcasting for IP ..."
                                if [ -f /var/run/dhcpcd-${nics}.pid ]
                                then
                                        if [ -z "$(/sbin/ifconfig ${nics} | grep 'inet addr')" ]
                                        then
                                                kill $(cat /var/run/dhcpcd-${nics}.pid)
                                                sleep 2
                                                dhcpcd -n -h $(hostname) ${nics}
                                        fi
                                fi
                        fi
                done
        else
                ewarn "No Network device auto detected ..."
        fi

        if [ "${ALSA}" = "yes" ]
        then
                if [ -n "${SOUND_FULLNAME}" -o -n "${SOUND_DRIVER}" ]
                then
                        local sndmsg="Soundcard:\n"

                        [ -n "${SOUND_FULLNAME}" ] \
                                && sndmsg="${sndmsg}              ${WARN}${SOUND_FULLNAME}\n"
                        [ -n "${SOUND_DRIVER}" ] \
                                && sndmsg="${sndmsg}              driver = ${SOUND_DRIVER}\n"

                        einfo "${sndmsg}"

                        if [ -x /etc/init.d/alsasound ]
                        then
                                start_service alsasound
                        fi

                        if [ -e /proc/asound/cards ]
                        then
                                for i in $(cat /proc/asound/cards | awk '{print $1}' | grep ^[[:digit:]])
                                do
                                        if [ -d /proc/asound/card$i ] && [ -x /usr/bin/amixer ]
                                        then
                                                amixer -c $i scontrols > /etc/amixer
                                                [ -n "$(grep Master /etc/amixer)" ] \
                                                        && amixer -c $i -q set Master 95% unmute \
                                                        >/dev/null 2>&1
                                                [ -n "$(grep PCM /etc/amixer)" ] \
                                                        && amixer -c $i -q set PCM 95% unmute \
                                                        >/dev/null 2>&1
                                                [ -n "$(grep Mic /etc/amixer)" ] \
                                                        && amixer -c $i -q set Mic 95% mute cap \
                                                        >/dev/null 2>&1
                                                [ -n "$(grep Wave /etc/amixer)" ] \
                                                        && amixer -c $i -q set Wave 95% unmute \
                                                        >/dev/null 2>&1
                                                [ -n "$(grep Capture /etc/amixer)" ] \
                                                        && amixer -c $i -q set Capture 95% unmute cap \
                                                        >/dev/null 2>&1
                                        fi
                                done
                        fi
                fi
        else
                ewarn "Skipping ALSA detection as requested on command line ..."
        fi

        [ -n "${XDESC}" ] && einfo "VideoCard:   ${HILITE}${XDESC}${NORMAL}"

        if [ "${X11}" = "yes" ]
        then
                if [ -x /etc/init.d/mkxf86config ]
                then
                        start_service mkxf86config
                fi
                if [ -x /etc/init.d/x-setup ]
                then
                        start_service x-setup
                fi
        else
                touch /etc/init.d/.noxdm
        fi

        killall hwsetup 2>/dev/null
        echo "6" > /proc/sys/kernel/printk
}

# vim: ts=4
1	zhen	2	#!/sbin/runscript
2	zhen	4
3	zhen	2	DHCP="yes"
4			DETECT="yes"
5	wolf31o2	24	GPM="yes"
6	zhen	2	PCMCIA="no"
7			HOTPLUG="yes"
8			APM="no"
9			ACPI="no"
10	wolf31o2	49	IDEDMA="yes"
11	wolf31o2	68	ALSA="yes"
12	wolf31o2	76	X11="yes"
13	wolf31o2	51
14	wolf31o2	68	get_config() {
15			CMDLINE="$(cat /proc/cmdline)"
16	wolf31o2	51
17	wolf31o2	68	for x in ${CMDLINE} ; do
18	wolf31o2	78	case "${x}" in
19			nodetect)
20			DETECT="no"
21			GPM="no"
22			HOTPLUG="no"
23			APM="no"
24			ACPI="no"
25			ALSA="no"
26			X11="no"
27			;;
28			nodhcp)
29			DHCP="no"
30			;;
31			nogpm)
32			GPM="no"
33			;;
34			dopcmcia)
35			PCMCIA="yes"
36			;;
37			doapm)
38			APM="yes"
39			ACPI="no"
40			;;
41	wolf31o2	122	acpi\=on\|acpi\=force)
42	wolf31o2	78	APM="no"
43			ACPI="yes"
44			;;
45	wolf31o2	122	ide\=nodma)
46	wolf31o2	78	IDEDMA="no"
47			;;
48			nohotplug)
49			HOTPLUG="no"
50			;;
51			nosound)
52			ALSA="no"
53			;;
54			nox)
55			X11="no"
56			;;
57			esac
58	wolf31o2	68	done
59			}
60
61	zhen	2	depend() {
62			need modules
63	wolf31o2	50	before net
64	wolf31o2	115	# provide gpm pcmcia apmd acpid coldplug hdparm alsasound mkxf86config x-setup
65	zhen	2	}
66
67	wolf31o2	69	# Checks whether a service will be started by autoconfig.
68			# Usage: check_svc var service [service_alternative]
69			check_svc() {
70	wolf31o2	113	if [ "${1}" = "yes" ]
71	wolf31o2	78	then
72	wolf31o2	114	if [ -x "/etc/init.d/${2}" ]
73	wolf31o2	78	then
74	wolf31o2	113	echo "${2}"
75			elif [ -n "${3}" -a -x "/etc/init.d/${3}" ]
76	wolf31o2	78	then
77	wolf31o2	113	echo "${3}"
78	wolf31o2	69	fi
79			fi
80			}
81
82			# Prints an ordered list of services that will be started by autoconfig.
83			list_services() {
84			get_config
85
86			local svcs="$(check_svc ${APM} apmd)"
87			svcs="${svcs} $(check_svc ${ACPI} acpid)"
88			svcs="${svcs} $(check_svc ${IDEDMA} hdparm)"
89			svcs="${svcs} $(check_svc ${PCMCIA} pcmcia)"
90			svcs="${svcs} $(check_svc ${GPM} gpm)"
91			svcs="${svcs} $(check_svc ${HOTPLUG} coldplug hotplug)"
92			svcs="${svcs} $(check_svc ${ALSA} alsasound)"
93	wolf31o2	115	svcs="${svcs} $(check_svc ${X11} mkxf86config x-setup)"
94	wolf31o2	69
95			echo ${svcs}
96			}
97
98	wolf31o2	101	unpack_firmware() {
99			# This unpacks any firmware tarballs.
100			# This has been moved here from coldplug, but might not be very effective
101			# since udev does coldplugging in 089 and higher.
102			if [ -e /lib/firmware.tar.bz2 ]
103			then
104			ebegin "Unpacking hotplug firmware"
105			tar xjf /lib/firmware.tar.bz2 -C /lib/firmware
106			eend 0
107			fi
108			}
109
110	wolf31o2	109	get_info() {
111			local tmp
112
113			if [ ! -z "${1}" -a ! -z "${2}" ]
114			then
115	wolf31o2	112	tmp=$(grep "^$1[[:space:]]\+:" /proc/cpuinfo \| head -n 1 \| cut -d" " -f3-)
116			# tmp=$([[ $'\n'$(</proc/cpuinfo) =~ $'\n''$1[[:space:]]\+:' ]] \| head -n 1 \| cut -d" " -f3-)
117	wolf31o2	114	eval "${2}='${tmp}'"
118	wolf31o2	109	fi
119			}
120
121	wolf31o2	81	detect_mips() {
122	wolf31o2	109	get_info "cpu model" cpuinfo
123			get_info "system type" machinfo
124			cpuinfo="${cpuinfo%% FPU*}"
125	wolf31o2	79
126			case "${machinfo}" in
127			"SGI Indigo2")
128			case "${cpuinfo}" in
129			R4*)
130	wolf31o2	109	machinfo="SGI Indigo2" # I2 R4x00
131	wolf31o2	79	;;
132			R8*)
133	wolf31o2	109	machinfo="SGI Indigo2 Power" # I2 R8000
134	wolf31o2	79	;;
135			R10*)
136	wolf31o2	109	machinfo="SGI Indigo2 Impact" # I2 R10000
137	wolf31o2	79	;;
138			esac
139			;;
140			esac
141
142	wolf31o2	109	PC="Detected an ${machinfo} w/ ${numcpu} ${cpuinfo} CPU(s)"
143	wolf31o2	79	}
144
145	wolf31o2	109	detect_x86_amd64_ia64() {
146	wolf31o2	112	if [ "${1}" = "ia64" ]
147			then
148			get_info "family" cpuinfo
149			else
150			get_info "model name" cpuinfo
151			fi
152	wolf31o2	109	get_info "cpu MHz" mhz
153	wolf31o2	112	mhz="${mhz%%.*}MHz"
154	wolf31o2	79
155	wolf31o2	114	PC="Detected ${numcpu} ${cpuinfo} CPU(s) @ ${mhz}"
156	wolf31o2	81	}
157
158	wolf31o2	98	detect_alpha() {
159	wolf31o2	109	get_info "platform string" machinfo
160			get_info "cpu" cpuinfo1
161			get_info "cpu model" cpuinfo2
162			get_info "cpus detected" numcpu
163
164			PC="Detected ${numcpu} ${cpuinfo1} ${cpuinfo2} CPU(s) in a ${machinfo} system"
165	wolf31o2	98	}
166
167	wolf31o2	89	detect_ppc() {
168	wolf31o2	109	get_info "cpu" cpuinfo
169			get_info "clock" mhz
170			get_info "detected as" machinfo
171			machinfo="${machinfo##*\(}"
172			machinfo="${machinfo%%\)*}"
173
174	wolf31o2	89	local machtype=""
175
176			case "${machinfo}" in
177	wolf31o2	120	"CHRP Pegasos2")
178			machtype="Pegasos 2"
179	wolf31o2	89	;;
180	wolf31o2	120	"CHRP IBM,9124-720")
181			machtype="IBM OP720"
182	wolf31o2	90	;;
183			"iBook 2 rev. 2")
184			machtype="Apple iBook G3"
185			;;
186	wolf31o2	120	"iMac G5"*)
187			machtype="Apple iMac G5"
188			;;
189			"MPC8241")
190			machtype="Kurobox"
191			;;
192	wolf31o2	92	"PowerMac G5")
193			machtype="Apple PowerMac G5"
194			;;
195	wolf31o2	90	"PowerMac G5 Dual Core")
196			machtype="Apple PowerMac G5 Dual Core"
197			;;
198	wolf31o2	120	"PowerMac G4 AGP Graphics")
199			machtype="Apple PowerMac G4"
200			;;
201			"PowerBook Titanium"\|'PowerBook G4 15"')
202			machtype="Apple Powerbook G4"
203			;;
204	wolf31o2	90	"Unknown Intrepid-based")
205			machtype="Apple Mac-Mini"
206			;;
207	wolf31o2	89	*)
208			machtype="Unknown PPC System"
209			;;
210			esac
211
212	wolf31o2	109	PC="Detected a(n) ${machtype} w/ ${numcpu} ${cpuinfo} CPU(s)"
213	wolf31o2	89	}
214
215	wolf31o2	109	detect_sparc() {
216			get_info "cpu" cpuinfo
217			get_info "ncpus active" numcpu
218			get_info "ncpus probed" numprobed
219
220			PC="Detected ${numcpu} active ${cpuinfo} CPU(s) of ${numprobed} total"
221			}
222
223	zhen	2	start() {
224	wolf31o2	69	echo "0" > /proc/sys/kernel/printk
225	wolf31o2	68	get_config
226	wolf31o2	130
227			# First off, we want hotplug/coldplug enabled, so let's re-enable it.
228			# We do this even if we aren't startup up the hotplug/coldplug
229			# services for the installer.
230			sed -i 's/RC_COLDPLUG="no"/RC_COLDPLUG="yes"/' /etc/conf.d/rc
231			# Now, we check if we're supposed to run a coldplug script.
232			if [ "${HOTPLUG}" = "yes" ]
233			then
234			# Check whether we should be using hotplug or coldplug
235			if [ -x /etc/init.d/coldplug ]
236			then
237			start_service coldplug
238			elif [ -x /etc/init.d/hotplug ]
239			then
240			start_service hotplug
241			else
242			unpack_firmware
243			[ -x /sbin/udevtrigger ] && /sbin/udevtrigger
244			fi
245			else
246			ewarn "Hotplug/Coldplug disabled via cmdline ..."
247			fi
248
249	wolf31o2	51	if [ "${DETECT}" = "yes" ]
250			then
251	wolf31o2	78	ebegin "Hardware detection started"
252	wolf31o2	112	local numcpu="$(grep -c '^processor[[:space:]]\+:' /proc/cpuinfo)"
253			# local numcpu=$([[ $'\n'$(</proc/cpuinfo) =~ $'\n''processor[[:space:]]\+:' ]] \| wc -l)
254	wolf31o2	80	local arch="$(uname -m)"
255	wolf31o2	109
256	wolf31o2	81	case ${arch} in
257	wolf31o2	109	mips*)
258	wolf31o2	81	detect_mips
259	wolf31o2	109	ACPI="no"
260			APM="no"
261			IDEDMA="no"
262	wolf31o2	81	;;
263	wolf31o2	113	i?86\|x86_64)
264	wolf31o2	109	detect_x86_amd64_ia64
265	wolf31o2	81	;;
266	wolf31o2	98	alpha)
267			detect_alpha
268	wolf31o2	109	ACPI="no"
269			APM="no"
270	wolf31o2	98	;;
271	wolf31o2	109	sparc*)
272			detect_sparc
273			ACPI="no"
274			APM="no"
275			;;
276	wolf31o2	98	powerpc*)
277			detect_ppc
278	wolf31o2	109	ACPI="no"
279			APM="no"
280	wolf31o2	98	;;
281	wolf31o2	109	ia64)
282			detect_x86_amd64_ia64 "ia64"
283			APM="no"
284			;;
285	wolf31o2	81	*)
286	wolf31o2	109	PC=
287	wolf31o2	81	;;
288			esac
289	wolf31o2	109	[ -n "${PC}" ] && einfo "${PC}"
290	wolf31o2	137	[ -x /usr/sbin/hwsetup ] && hwsetup
291	zhen	2	eend
292	wolf31o2	6	else
293	wolf31o2	78	ewarn "Hardware detection disabled via cmdline ..."
294	wolf31o2	6	fi
295	zhen	2
296	wolf31o2	51	if [ "${APM}" = "yes" ]
297			then
298	wolf31o2	78	modprobe apm power_off=1 >/dev/null 2>&1 && \
299			einfo "APM BIOS found, power management functions enabled ..."
300	wolf31o2	77	[ -x /etc/init.d/apmd ] && start_service apmd
301	zhen	2	else
302	wolf31o2	109	einfo "Not Loading APM Bios support ..."
303	wolf31o2	6	fi
304	zhen	2
305	wolf31o2	51	if [ "${ACPI}" = "yes" ]
306			then
307	wolf31o2	78	modprobe processor >/dev/null 2>&1 && \
308			ebegin "ACPI power management functions enabled" && \
309			modprobe thermal >/dev/null
310	wolf31o2	29	modprobe fan >/dev/null 2>&1
311			modprobe button >/dev/null 2>&1
312			modprobe battery >/dev/null 2>&1
313			modprobe ac >/dev/null 2>&1
314	wolf31o2	131	modprobe thermal >/dev/null 2>&1
315			modprobe video >/dev/null 2>&1
316			modprobe dock >/dev/null 2>&1
317	wolf31o2	77	[ -x /etc/init.d/acpid ] && start_service acpid
318	wolf31o2	6	eend
319	wolf31o2	78	else
320	wolf31o2	109	einfo "Not Loading ACPI support ..."
321	wolf31o2	6	fi
322	zhen	2
323	wolf31o2	51	if [ "${IDEDMA}" = "yes" ]
324			then
325	wolf31o2	109	[ -x /etc/init.d/hdparm ] && start_service hdparm
326	wolf31o2	49	fi
327
328	wolf31o2	51	if [ "${PCMCIA}" = "yes" ]
329			then
330	wolf31o2	78	einfo "PCMCIA enabled via cmdline ..."
331	wolf31o2	77	[ -x /etc/init.d/pcmcia ] && start_service pcmcia
332	wolf31o2	6	fi
333	zhen	2
334	wolf31o2	51	if [ "${DHCP}" = "no" ]
335			then
336	wolf31o2	48	sed -i -e '/^ifconfig_eth.dhcp./ s/^/#/' \
337			-e '/^iface_eth.dhcp./ s/^/#/' \
338	wolf31o2	55	-e '/^config_eth.dhcp./ s/^/#/' \
339	wolf31o2	25	/etc/conf.d/net
340	wolf31o2	118	for i in `seq 0 4`
341			do
342			echo "config_eth$i=( \"none\" )" >> /etc/conf.d/net
343			done
344	wolf31o2	78	ewarn "Skipping DHCP broadcast detection as requested on boot commandline ..."
345	wolf31o2	6	fi
346	zhen	2
347	wolf31o2	78	# Read in what hwsetup has found
348	wolf31o2	64	[ -f /etc/sysconfig/gentoo ] && . /etc/sysconfig/gentoo
349	zhen	2
350	wolf31o2	6	# Mouse
351	wolf31o2	51	if [ -n "${MOUSE_DEVICE}" ]
352			then
353	wolf31o2	78	einfo "Mouse is ${HILITE}${MOUSE_FULLNAME}${NORMAL} at ${HILITE}${MOUSE_DEVICE}${NORMAL} ..."
354	wolf31o2	6	source /etc/sysconfig/mouse
355	wolf31o2	51	if [ -x /usr/sbin/gpm ]
356			then
357	wolf31o2	114	if [ $(grep "#MOUSE=${MOUSETYPE}" /etc/conf.d/gpm) ]
358			# if [ $([[ $'\n'$(</etc/conf.d/gpm) =~ $'\n''#MOUSE=${MOUSETYPE}' ]]) ]
359	wolf31o2	110	then
360			sed -i "\@MOUSE=${MOUSETYPE}@s@^#@@" /etc/conf.d/gpm
361			else
362			echo "MOUSE=${MOUSETYPE}" >>/etc/conf.d/gpm
363			fi
364	wolf31o2	78
365	wolf31o2	114	if [ $(grep "#MOUSEDEV=${DEVICE}" /etc/conf.d/gpm) ]
366			# if [ $([[ $'\n'$(</etc/conf.d/gpm) =~ $'\n''#MOUSEDEV=${DEVICE}' ]]) ]
367	wolf31o2	110	then
368			sed -i "\@MOUSEDEV=${DEVICE}@s@^#@@" /etc/conf.d/gpm
369			else
370			echo "MOUSEDEV=${DEVICE}" >>/etc/conf.d/gpm
371			fi
372	wolf31o2	78
373			[ "${GPM}" = "yes" ] \
374			&& [ -x /etc/init.d/gpm ] && start_service gpm
375	wolf31o2	29	fi
376	wolf31o2	6	fi
377	zhen	2
378	wolf31o2	78	[ "${DETECT}" = "no" ] && DHCP="no"
379			[ "${DETECT}" = "yes" ] \
380			&& NETDEVICES="$(awk -F: '/eth.:\|tr.:\|ath.:\|wlan.:/{print $1}' /proc/net/dev 2>/dev/null)"
381	zhen	2
382	wolf31o2	51	if [ -n "${NETDEVICES}" ]
383			then
384	wolf31o2	74	for nics in ${NETDEVICES}
385			do
386			if [ "${DHCP}" = "yes" ]
387			then
388	wolf31o2	78	einfo "Network device ${HILITE}${nics}${NORMAL} detected, DHCP broadcasting for IP ..."
389	wolf31o2	135	if [ -f /var/run/dhcpcd-${nics}.pid ]
390			then
391	wolf31o2	137	if [ -z "$(/sbin/ifconfig ${nics} \| grep 'inet addr')" ]
392	wolf31o2	135	then
393			kill $(cat /var/run/dhcpcd-${nics}.pid)
394			sleep 2
395			dhcpcd -n -h $(hostname) ${nics}
396			fi
397			fi
398	wolf31o2	74	fi
399			done
400	zhen	2	else
401	wolf31o2	78	ewarn "No Network device auto detected ..."
402	wolf31o2	6	fi
403	zhen	2
404	wolf31o2	68	if [ "${ALSA}" = "yes" ]
405	wolf31o2	51	then
406	wolf31o2	68	if [ -n "${SOUND_FULLNAME}" -o -n "${SOUND_DRIVER}" ]
407	wolf31o2	51	then
408	wolf31o2	78	local sndmsg="Soundcard:\n"
409
410			[ -n "${SOUND_FULLNAME}" ] \
411			&& sndmsg="${sndmsg} ${WARN}${SOUND_FULLNAME}\n"
412			[ -n "${SOUND_DRIVER}" ] \
413			&& sndmsg="${sndmsg} driver = ${SOUND_DRIVER}\n"
414
415			einfo "${sndmsg}"
416
417	wolf31o2	70	if [ -x /etc/init.d/alsasound ]
418			then
419	wolf31o2	77	start_service alsasound
420	wolf31o2	70	fi
421	wolf31o2	78
422	wolf31o2	82	if [ -e /proc/asound/cards ]
423			then
424	wolf31o2	102	for i in $(cat /proc/asound/cards \| awk '{print $1}' \| grep ^[[:digit:]])
425	wolf31o2	82	do
426			if [ -d /proc/asound/card$i ] && [ -x /usr/bin/amixer ]
427			then
428			amixer -c $i scontrols > /etc/amixer
429			[ -n "$(grep Master /etc/amixer)" ] \
430			&& amixer -c $i -q set Master 95% unmute \
431			>/dev/null 2>&1
432			[ -n "$(grep PCM /etc/amixer)" ] \
433			&& amixer -c $i -q set PCM 95% unmute \
434			>/dev/null 2>&1
435			[ -n "$(grep Mic /etc/amixer)" ] \
436			&& amixer -c $i -q set Mic 95% mute cap \
437			>/dev/null 2>&1
438			[ -n "$(grep Wave /etc/amixer)" ] \
439			&& amixer -c $i -q set Wave 95% unmute \
440			>/dev/null 2>&1
441			[ -n "$(grep Capture /etc/amixer)" ] \
442			&& amixer -c $i -q set Capture 95% unmute cap \
443			>/dev/null 2>&1
444			fi
445			done
446			fi
447	wolf31o2	15	fi
448	wolf31o2	68	else
449	wolf31o2	86	ewarn "Skipping ALSA detection as requested on command line ..."
450	wolf31o2	6	fi
451	zhen	2
452	wolf31o2	114	[ -n "${XDESC}" ] && einfo "VideoCard: ${HILITE}${XDESC}${NORMAL}"
453
454	wolf31o2	102	if [ "${X11}" = "yes" ]
455	wolf31o2	76	then
456	wolf31o2	115	if [ -x /etc/init.d/mkxf86config ]
457			then
458			start_service mkxf86config
459			fi
460	wolf31o2	109	if [ -x /etc/init.d/x-setup ]
461			then
462			start_service x-setup
463			fi
464	wolf31o2	102	else
465			touch /etc/init.d/.noxdm
466	wolf31o2	76	fi
467
468	wolf31o2	6	killall hwsetup 2>/dev/null
469			echo "6" > /proc/sys/kernel/printk
470	zhen	2	}
471	wolf31o2	6
472			# vim: ts=4