Contents of /trunk/autoconfig

#!/sbin/runscript
# Copyright 1999-2002 Gentoo Technologies, Inc.
# Distributed under the terms of the GNU General Public License v2
# $Header: /var/cvsroot/gentoo/src/livecd-tools/autoconfig,v 1.16 2005/01/28 18:47:11 wolf31o2 Exp $

echo "0" > /proc/sys/kernel/printk
DHCP="yes"
DETECT="yes"
GPM="yes"
PCMCIA="no"
HOTPLUG="yes"
APM="no"
ACPI="no"
CMDLINE="`cat /proc/cmdline`"
for x in ${CMDLINE} ; do
        if [ "${x}" = "nodetect" ]; then
                DETECT="no"
                GPM="no"
                HOTPLUG="no"
                APM="no"
                ACPI="no"
        fi

        if [ "${x}" = "nodhcp" ]; then
                DHCP="no"
        fi

        if [ "${x}" = "dopcmcia" ]; then
                PCMCIA="yes"
        fi
        
        if [ "${x}" = "doapm" ]; then
                APM="yes"
                ACPI="no"
        fi

        if [ "${x}" = "acpi=on" -o "${x}" = "acpi=force"]; then
                APM="no"
                ACPI="yes"
        fi

        if [ "${x}" = "nohotplug" ]; then
                HOTPLUG="no"
        fi
done

depend() {
        need modules
}

start() {
        if [ "${DETECT}" = "yes" ]; then
                ebegin ${WARN}"Hardware detection started"
                PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null`
                ebegin ${GOOD}"${PC}"
                eend            
                [ -x /usr/sbin/hwsetup ] && hwsetup -p >/dev/null
                eend
        else
                ebegin ${WARN}"Hardware detection disabled via cmdline$NORMAL"
        fi

        if [ "${APM}" = "yes" ]; then
                insmod apm power_off=1 >/dev/null 2>&1 && ebegin ${GOOD}"APM BIOS found, power management functions enabled.${NORMAL}"
                [ -x /etc/init.d/apmd ] && /etc/init.d/apmd start
        else
                ebegin ${GOOD}"Not Loading APM Bios support.${NORMAL}"
                eend
        fi

        if [ "${ACPI}" = "yes" -o "${ACPI}" = "force" ]; then
                insmod processor >/dev/null 2>&1 && ebegin ${GOOD} ACPI power management functions enabled.${NORMAL} && insmod thermal >/dev/null
                insmod fan >/dev/null 2>&1
                insmod button >/dev/null 2>&1
                insmod battery >/dev/null 2>&1
                insmod ac >/dev/null 2>&1
                [ -x /etc/init.d/acpid ] && /etc/init.d/acpid start
                eend
        fi

        if [ "${PCMCIA}" = "yes" ]; then
                ebegin ${HILITE} "PCMCIA enabled via cmdline"
                /etc/init.d/pcmcia start
        fi

        if [ "${DHCP}" = "no" ]; then
                sed -i -e '/^ifconfig_eth/ s//^#/' \
                        -e '/^iface_eth/ s//^#/' \
                        /etc/conf.d/net
                ebegin ${BAD}"Skipping DHCP broadcast detection as requested on boot commandline."
        fi

        #Read in what hwsetup has found
        [ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix

        # Mouse
        if [ -n "${MOUSE_DEVICE}" ]; then
                ebegin ${GOOD}"Mouse is ${HILITE}${MOUSE_FULLNAME}${GOOD} at ${HILITE}${MOUSE_DEVICE}${NORMAL}"
                source /etc/sysconfig/mouse
                if [ -x /usr/sbin/gpm ]; then
                        if [ `grep "#MOUSE=${MOUSETYPE}" /etc/conf.d/gpm` ]; then
                                sed -i "\@MOUSE=${MOUSETYPE}@s@^#@@" /etc/conf.d/gpm
                        else
                                echo "MOUSE=${MOUSETYPE}" >>/etc/conf.d/gpm
                        fi
                        if [ `grep "#MOUSEDEV=${DEVICE}" /etc/conf.d/gpm` ]; then
                                sed -i "\@MOUSEDEV=${DEVICE}@s@^#@@" /etc/conf.d/gpm
                        else
                                echo "MOUSEDEV=${DEVICE}" >>/etc/conf.d/gpm
                        fi
                        if [ "$GPM" = "yes" ]; then
                                [ -x /etc/init.d/gpm ] && /etc/init.d/gpm start
                        fi
                eend
        fi

        if [ "${HOTPLUG}" = "yes" ]; then
                #Check whether we should be using hotplug or coldplug
                if [ -x /etc/init.d/coldplug ]; then
                        /etc/init.d/coldplug start
                else
                        [ -x /etc/init.d/hotplug ] && /etc/init.d/hotplug start
                fi
        else
                ebegin ${BAD}"Hotplug disabled via cmdline${NORMAL}"
        fi

        if [ "${DETECT}" = "no" ]; then
                DHCP="no"
        fi

        if [ "${DETECT}" = "yes" ]; then
                NETDEVICES="`awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null`"
        fi

        if [ -n "${NETDEVICES}" ]; then
                if [ "${DHCP}" = "yes" ]; then
                        ebegin ${GOOD}"Network device${HILITE}${NETDEVICES}${GOOD} detected,${WARN} DHCP broadcasting for IP.${NORMAL}"
                        dhcpcd -h `basename hostname` &
                fi
                eend

        else
                ebegin ${BAD}"No Network device auto detected.${NORMAL}"
        fi


        if [ -n "${SOUND_FULLNAME}" -o -n "${SOUND_DRIVER}" ]; then
                ebegin ${GOOD}"Soundcard:"
                eend
                [ -n "${SOUND_FULLNAME}" ] 
                ebegin "              ${WARN}${SOUND_FULLNAME}"
                [ -n "${SOUND_DRIVER}" ] 
                ebegin ${WARN}"              driver = ${SOUND_DRIVER}"${HILITE}
                if [ -d /proc/asound/card0 ] && [ -x /usr/bin/amixer ]; then
                        amixer scontrols > /etc/amixer
                        if [ -n "`grep Master /etc/amixer`" ]
                        then
                                amixer -q set Master 75% >/dev/null 2>&1
                                amixer -q set Master unmute >/dev/null 2>&1
                        fi
                        if [ -n "`grep PCM /etc/amixer`" ]
                        then
                                amixer -q set PCM 75% >/dev/null 2>&1
                                amixer -q set PCM unmute >/dev/null 2>&1
                        fi
                        if [ -n "`grep Mic /etc/amixer`" ]
                        then
                                amixer -q set Mic 75% >/dev/null 2>&1
                                amixer -q set Mic cap >/dev/null 2>&1
                        fi
                        if [ -n "`grep Wave /etc/amixer`" ]
                        then
                                amixer -q set Wave 75% >/dev/null 2>&1
                                amixer -q set Wave unmute >/dev/null 2>&1
                        fi
                        if [ -n "`grep Capture /etc/amixer`" ]
                        then
                                amixer -q set Capture 75% >/dev/null 2>&1
                                amixer -q set Capture cap >/dev/null 2>&1
                                amixer -q set Capture unmute >/dev/null 2>&1
                        fi
                fi
        fi


        if [ -n "${XDESC}" -o -n "${XDESC}" ]; then
        ebegin ${GOOD}"VideoCard:   ${WARN} ${XDESC}"
        eend
        fi

        killall hwsetup 2>/dev/null
        echo "6" > /proc/sys/kernel/printk

}

# vim: ts=4
1	#!/sbin/runscript
2	# Copyright 1999-2002 Gentoo Technologies, Inc.
3	# Distributed under the terms of the GNU General Public License v2
4	# $Header: /var/cvsroot/gentoo/src/livecd-tools/autoconfig,v 1.16 2005/01/28 18:47:11 wolf31o2 Exp $
5
6	echo "0" > /proc/sys/kernel/printk
7	DHCP="yes"
8	DETECT="yes"
9	GPM="yes"
10	PCMCIA="no"
11	HOTPLUG="yes"
12	APM="no"
13	ACPI="no"
14	CMDLINE="`cat /proc/cmdline`"
15	for x in ${CMDLINE} ; do
16	if [ "${x}" = "nodetect" ]; then
17	DETECT="no"
18	GPM="no"
19	HOTPLUG="no"
20	APM="no"
21	ACPI="no"
22	fi
23
24	if [ "${x}" = "nodhcp" ]; then
25	DHCP="no"
26	fi
27
28	if [ "${x}" = "dopcmcia" ]; then
29	PCMCIA="yes"
30	fi
31
32	if [ "${x}" = "doapm" ]; then
33	APM="yes"
34	ACPI="no"
35	fi
36
37	if [ "${x}" = "acpi=on" -o "${x}" = "acpi=force"]; then
38	APM="no"
39	ACPI="yes"
40	fi
41
42	if [ "${x}" = "nohotplug" ]; then
43	HOTPLUG="no"
44	fi
45	done
46
47	depend() {
48	need modules
49	}
50
51	start() {
52	if [ "${DETECT}" = "yes" ]; then
53	ebegin ${WARN}"Hardware detection started"
54	PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null`
55	ebegin ${GOOD}"${PC}"
56	eend
57	[ -x /usr/sbin/hwsetup ] && hwsetup -p >/dev/null
58	eend
59	else
60	ebegin ${WARN}"Hardware detection disabled via cmdline$NORMAL"
61	fi
62
63	if [ "${APM}" = "yes" ]; then
64	insmod apm power_off=1 >/dev/null 2>&1 && ebegin ${GOOD}"APM BIOS found, power management functions enabled.${NORMAL}"
65	[ -x /etc/init.d/apmd ] && /etc/init.d/apmd start
66	else
67	ebegin ${GOOD}"Not Loading APM Bios support.${NORMAL}"
68	eend
69	fi
70
71	if [ "${ACPI}" = "yes" -o "${ACPI}" = "force" ]; then
72	insmod processor >/dev/null 2>&1 && ebegin ${GOOD} ACPI power management functions enabled.${NORMAL} && insmod thermal >/dev/null
73	insmod fan >/dev/null 2>&1
74	insmod button >/dev/null 2>&1
75	insmod battery >/dev/null 2>&1
76	insmod ac >/dev/null 2>&1
77	[ -x /etc/init.d/acpid ] && /etc/init.d/acpid start
78	eend
79	fi
80
81	if [ "${PCMCIA}" = "yes" ]; then
82	ebegin ${HILITE} "PCMCIA enabled via cmdline"
83	/etc/init.d/pcmcia start
84	fi
85
86	if [ "${DHCP}" = "no" ]; then
87	sed -i -e '/^ifconfig_eth/ s//^#/' \
88	-e '/^iface_eth/ s//^#/' \
89	/etc/conf.d/net
90	ebegin ${BAD}"Skipping DHCP broadcast detection as requested on boot commandline."
91	fi
92
93	#Read in what hwsetup has found
94	[ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix
95
96	# Mouse
97	if [ -n "${MOUSE_DEVICE}" ]; then
98	ebegin ${GOOD}"Mouse is ${HILITE}${MOUSE_FULLNAME}${GOOD} at ${HILITE}${MOUSE_DEVICE}${NORMAL}"
99	source /etc/sysconfig/mouse
100	if [ -x /usr/sbin/gpm ]; then
101	if [ `grep "#MOUSE=${MOUSETYPE}" /etc/conf.d/gpm` ]; then
102	sed -i "\@MOUSE=${MOUSETYPE}@s@^#@@" /etc/conf.d/gpm
103	else
104	echo "MOUSE=${MOUSETYPE}" >>/etc/conf.d/gpm
105	fi
106	if [ `grep "#MOUSEDEV=${DEVICE}" /etc/conf.d/gpm` ]; then
107	sed -i "\@MOUSEDEV=${DEVICE}@s@^#@@" /etc/conf.d/gpm
108	else
109	echo "MOUSEDEV=${DEVICE}" >>/etc/conf.d/gpm
110	fi
111	if [ "$GPM" = "yes" ]; then
112	[ -x /etc/init.d/gpm ] && /etc/init.d/gpm start
113	fi
114	eend
115	fi
116
117	if [ "${HOTPLUG}" = "yes" ]; then
118	#Check whether we should be using hotplug or coldplug
119	if [ -x /etc/init.d/coldplug ]; then
120	/etc/init.d/coldplug start
121	else
122	[ -x /etc/init.d/hotplug ] && /etc/init.d/hotplug start
123	fi
124	else
125	ebegin ${BAD}"Hotplug disabled via cmdline${NORMAL}"
126	fi
127
128	if [ "${DETECT}" = "no" ]; then
129	DHCP="no"
130	fi
131
132	if [ "${DETECT}" = "yes" ]; then
133	NETDEVICES="`awk -F: '/eth.:\|tr.:/{print $1}' /proc/net/dev 2>/dev/null`"
134	fi
135
136	if [ -n "${NETDEVICES}" ]; then
137	if [ "${DHCP}" = "yes" ]; then
138	ebegin ${GOOD}"Network device${HILITE}${NETDEVICES}${GOOD} detected,${WARN} DHCP broadcasting for IP.${NORMAL}"
139	dhcpcd -h `basename hostname` &
140	fi
141	eend
142
143	else
144	ebegin ${BAD}"No Network device auto detected.${NORMAL}"
145	fi
146
147
148	if [ -n "${SOUND_FULLNAME}" -o -n "${SOUND_DRIVER}" ]; then
149	ebegin ${GOOD}"Soundcard:"
150	eend
151	[ -n "${SOUND_FULLNAME}" ]
152	ebegin " ${WARN}${SOUND_FULLNAME}"
153	[ -n "${SOUND_DRIVER}" ]
154	ebegin ${WARN}" driver = ${SOUND_DRIVER}"${HILITE}
155	if [ -d /proc/asound/card0 ] && [ -x /usr/bin/amixer ]; then
156	amixer scontrols > /etc/amixer
157	if [ -n "`grep Master /etc/amixer`" ]
158	then
159	amixer -q set Master 75% >/dev/null 2>&1
160	amixer -q set Master unmute >/dev/null 2>&1
161	fi
162	if [ -n "`grep PCM /etc/amixer`" ]
163	then
164	amixer -q set PCM 75% >/dev/null 2>&1
165	amixer -q set PCM unmute >/dev/null 2>&1
166	fi
167	if [ -n "`grep Mic /etc/amixer`" ]
168	then
169	amixer -q set Mic 75% >/dev/null 2>&1
170	amixer -q set Mic cap >/dev/null 2>&1
171	fi
172	if [ -n "`grep Wave /etc/amixer`" ]
173	then
174	amixer -q set Wave 75% >/dev/null 2>&1
175	amixer -q set Wave unmute >/dev/null 2>&1
176	fi
177	if [ -n "`grep Capture /etc/amixer`" ]
178	then
179	amixer -q set Capture 75% >/dev/null 2>&1
180	amixer -q set Capture cap >/dev/null 2>&1
181	amixer -q set Capture unmute >/dev/null 2>&1
182	fi
183	fi
184	fi
185
186
187	if [ -n "${XDESC}" -o -n "${XDESC}" ]; then
188	ebegin ${GOOD}"VideoCard: ${WARN} ${XDESC}"
189	eend
190	fi
191
192	killall hwsetup 2>/dev/null
193	echo "6" > /proc/sys/kernel/printk
194
195	}
196
197	# vim: ts=4