/[gentoo-src]/rc-scripts/ChangeLog
Gentoo

Diff of /rc-scripts/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.319 Revision 1.503
1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts 1# ChangeLog for Gentoo System Intialization ("rc") scripts
2# Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL 2# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPLv2
3# Written by Daniel Robbins (drobbins@gentoo.org) 3
4 19 Nov 2004; Aron Grffis <agriffis@gentoo.org>:
5 Remove crap "ll" and "d" aliases from skel .bashrc
6
7 19 Nov 2004; Roy Marples <uberlord@gentoo.org>:
8 tests for hostname (none) when sending hostname via dhcpcd, udhpc or pump
9 udhcpc now does correct signal handling so we can release leases and
10 terminate cleanly
11 Improved pump process detection
12 Rewrote udhcpc helper scripts around udhcpc and wrapped dhclient to udhcpc
13 scripts. This makes things much saner as udhcpc is much saner - also fixed
14 essidnet and ipv6 local link for them.
15 removed iproute2 udhcpc reliance on the "bc" command
16
17 17 Nov 2004; Roy Marples <uberlord@gentoo.org>:
18 Fixed invalid variable handling in bonding and vlan - bug #71419
19 apipa now brings the interface up before testing if address exists
20 Updated bonding documentation - bug #71419
21 Fixed iproute2 adding addresses for vlans - bug #71419
22 ifconfig handle inet6 routing automatically - bug #33310
23 ifconfig - fixed old gateway + gateway in routes conflict
24 iproute2 cleaned up some functions
25
26 16 Nov 2004; Roy Marples <uberlord@gentoo.org>:
27
28 We no longer default a fallback to APIPA when no config is given
29 net.example fleshed out a bit more for dhcpcd - fixes #60845
30 Improved forced module handling a touch
31 modules_sort and modules_check_user in net.lo buffer _provides,
32 _before and _after in arrays to avoid shelling out
33
34 15 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
35
36 Add a check to clock init.d to make sure users dont try to set
37 config their clock in rc.conf anymore.
38
39 Redo hostname/domainname scripts to use files in /etc/conf.d/
40 instead of creating files in /etc/. Allows for controlling things
41 like the behavior of setting the 'domain' in resolv.conf since users
42 may not always understand exactly what's going on.
43
44 Stop referring to conf.d/basic as a global rc config option. That
45 file hasn't been used in a long time and has since been replaced
46 with env.d/00basic. Updated sbin/runscript.sh, etc/profile,
47 sbin/rc-help.sh, and src/awk/cachedepends.awk.
48
49 Run `find | xargs` instead of `find -exec`. Much better performance
50 this way, and busybox friendly #59732.
51
52 15 Nov 2004; Roy Marples <uberlord@gentoo.org>:
53
54 Split modules_load into smaller more managable functions in net.lo
55 Added modules_force option to net.lo with a big phat warning in
56 net.example about it potentially breaking networking
57 Added searchdomains_ESSID option to essidnet
58 Stopped the domain setting from putting the same entry in search
59 in config-system and essidnet
60 Removed second warning in net.lo when configuration not set
61 Documented APIPA module in net.example
62 Added kernel checking for vlan - fixes #70829
63 Added kernel checking for bonding, bridging and tuntap
64 Added iproute2 support to the APIPA module
65
66 13 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
67
68 Update the svcdir mounting #69595. Instead of mounting in /mnt
69 and then bind mounting to $svcdir, we mount the ramdisk on $svcidr.
70
71 12 Nov 2004; Roy Marples <uberlord@gentoo.org>:
72
73 Added arping duplicate address detection to net.lo
74 Created Automatic Private IP Addressing (APIPA) module
75
76 Added dependancy checking to ipppd
77 Bonding is now started pre instead of post
78 Fixed iface variable in dhcp modules for vlans
79 Changed get_device to interface_device
80 Changed get_type to interface_type
81 Added vlan configuration options and documented them in net.example
82 Fixed bridge configuration handling
83 Removed _get_vlans from iproute2 and ifconfig as vlan now does it itself
84
85 11 Nov 2004; Roy Marples <uberlord@gentoo.org>:
86
87 Fixed category of rp-pppoe to net-dialup error when requesting ADSL
88 Improved inet6 address deletion and detection in iproute2
89 Improved gateway logic in ifconfig
90 Changed all wireless reporting functions to use iwgetid instead of
91 parsing iwconfig output except for essid
92
93* rc-scripts 1.6.6 (08 Nov 2004)
94
95 08 Nov 2004; Roy Marples <uberlord@gentoo.org>:
96
97 Added options to configure bridge
98 Added bridge configuration example to net.example
99 Added missing required function interface_exists to iptunnel check_depends
100
101 07 Nov 2004; Aron Griffis <agriffis@gentoo.org>:
102
103 Fix shell scripting errors that would result in
104 /sbin/functions.sh: line 166: [: too many arguments.
105
106 05 Nov 2004; Roy Marples <uberlord@gentoo.org>:
107
108 net-scripts/net.modules.d/bridge
109 - fixed destroying a bridge if no ports were added
110 - starts interfaces if they don't exist - fixed bug #65153
111
112 net-scrips/net.modules.d/bonding
113 - starts interfaces if they don't exist
114
115 net-scripts/init.d/net.lo
116 - added net_start() function to start depandant ifaces
117 so that bridge br0 can active tun0 which net.tun0 has to create
118 - added use dependany on wlan incase we're using linux-wlan-ng drivers
119 fixes bug #64978
120 - moved start() to run_start() and stop() to run_stop()
121 created run() and new start()/stop() functions
122 this is so that we have one single entry point to localise variables
123 and to remove any added functions loaded by our modules
124 - removed redundant interface_exists() as it's provided by
125 ifconfig and/or iproute2
126
127 net-scripts/net.modules.d/ifconfig and iproute2
128 - added ifconfig_tunnel and iproute2_tunnel functions
129
130 addred gre/ipip tunnel support via the the tunnel module
131 - fixes bug #50765
132
133 04 Nov 2004; Roy Marples <uberlord@gentoo.org>:
134
135 net-scripts/net.modules.d/pump
136 - fixed setting ntp servers
137
138 net-scripts/net.modules.d/dhcpcd
139 - fixed stopping function
140
141 net-scripts/net.modules.d/bonding
142 - fixed module to actually work with the interface
143
144 net-scripts/init.d/net.lo
145 - we remove all added functions when restarting an interface
146 this relies on the diff command being available
147
148 added isdn support via the new ipppd module - fixes bug #69035
149
150 net-scripts/conf.d/net.example
151 - added sample isdn setup
152
153 net-scripts/conf.d/wireless.example
154 - added better descriptions to the _sleep variables
155
156 Fixed boolean logic error when testing is_net_up in /sbin/runscript.sh
157 - fixed bug #70022
158
159 net.lo - added get_type function to return the type of the interface
160 - eth, ippp, etc
161
162 ipppd, tuntap
163 - start() moved to pre_start() and we now test by type
164 this means you no longer need ifconfig_ippp0=( "isdn" "dhcp" )
165 as ippp0 is always an isdn device
166
167 bridge - fixed stop function and moved start() to pre_start()
168 and automatically start if the variable bridge_${iface} exists
169
170 net.example - fixed up documentation for changed behaviour above
171
172 03 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
173
174 When launching critical services in /sbin/rc, make sure we source
175 the conf.d file (if it exists). Resolves #69956.
176
177 03 Nov 2004; Roy Marples <uberlord@gentoo.org>:
178
179 net-scripts/init.d/net.lo
180 - fixed !module when it's not installed
181 - we can now specify null inet addresses in the config
182 this allows a pure inet6 setup
183 - shutdown lo the same way we bring it up
184
185 net-scripts/net.modules.d/ifconfig
186 - changed IPv6 to inet6 in output of adding inet6 addresses
187 - just output inet6 address removed, not eth0 del foo
188
189 net-scripts/net.modules.d/iproute2
190 - fix deletion of non-link addresses - fixes bug #65417 (again)
191 - handle inet6 addresses like ifconfig - fixes more bug #65417
192
193 net-scripts/conf.d/net.example
194 - noted that inet6 addresses do not create aliases
195 - added examples of assigning inet6 addresses
196
197 net-scripts/net.modules.d/iwconfig
198 - improve error message when card does not support scanning
199
200 net-scripts/conf.d/wireless.example
201 - fixed comment regarding preferred_aps not working with cards that don't
202 support scanning
203
204 02 Nov 2004; Roy Marples <uberlord@gentoo.org>:
205
206 net-scripts/conf.d/net.example
207 - added bridging and tuntap examples
208
209 net-scripts/init.d/net.lo
210 - modprobe ${IFACE} when ${IFACE} does not exist
211
212 net-scripts/net.modules.d/ifconfig
213 - fixed interface existance check
214
215 net-scripts/net.modules.d
216 ifconfig & iproute2
217 - added boolean to interface_exists to report if it exists or not
218 - added checks to see if the interface exists or not when starting
219
220 dhcpcd
221 - removed debug line
222
223 bonding, dhclient, dhcpcd, essidnet, macchanger, pump, udhcpc
224 - added checks to see if the interface exists or not when starting
225
226 tuntap
227 - added checks to see if the interface exists or not when stopping
228
229 01 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
230
231 Dump the error message that hwclock returns since it tends to be
232 quite useful. Modified init.d/clock.
233
234 Fix error in functions.sh [ -z "$@" ] -> [[ -z "$@" ]] #69789.
235
236 Don't create /dev/sndstat link anymore in populate_udev per #69635.
237
238 01 Nov 2004; Roy Marples <uberlord@gentoo.org>:
239
240 net-scripts/init.d/net.lo:
241 - modules specified by interface config now error if they are not loaded
242 - moved interface check to after preup incase user preup loads drivers
243 - modules can be explicitly not used by prefixing them with a !
244 however, they are still available to other modules
245 fixes bugs #68908, #69027
246 - remove check to see if interface exists
247 - modules may setup new interfaces and still require config
248 so we have a new label counter in iface_start
249 - removed the check to see if a class wrapping already exists
250 this fixes the bug where ifconfig and iproute2 are installed, but
251 ifconfig is asked for and the interface is restarted.
252 - added check to see if the configured module is loaded
253 and installed or not in iface_start
254 - add dependancy on isdn4linux - fixes bug #69035
255 - interface_exists moved to iproute and ifconfig
256
257 net-scripts/net.modules.d
258 - Split wireless module into iwconfig and essidnet modules
259 - Added tuntap and bridge modules, fixes bug #55394, #30688
260
261 net-scripts/init.d/iwconfig:
262 - wep mode is now reported
263 - removed post_stop function so we keep existing config
264 - added pre_stop to set the ESSID variable
265 - changed to veinfo/vewarn where appropriate
266 - check if interface exists otherwise abort gracefully
267 - no longer deletes addresses as we now avoid
268 ipv6 local addresses in detecting if interface has an addresses or not
269
270 net-scripts/init.d/ifconfig:
271 - added flag enable/disable function
272 - scope:link inet6 addresses are ignored when testing is_up and
273 del_addresses - fixes bug #65417
274
275 net-scripts/init.d/iproute2:
276 - added flag enable/disable function
277 - scope:link inet6 addresses are ignored when testing is_up and
278 del_addresses - fixes bug #65417
279
280 net-scripts/init.d/macchanger:
281 - fixed detecting whether the change worked or not, fixes bug #68893
282
283 net-scripts/init.d/vlan:
284 - fixed old config problem
285
286 31 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
287
288 Do not delete depscan and envupdate caches on reboot, as this should
289 improve bootup times - works nicely with the '-u' parameters of both.
290 Also move the '-u' parameter test of depscan.sh after the directory
291 exist test, else ${svcdir}/started/, etc do not exist. Modified both
292 /sbin/rc and /sbin/depscan.sh for this.
293
294 Move things around in /sbin/functions.sh to have all functions above.
295
296 Add the 'lo' option to RC_NET_STRICT_CHECKING to resolve bug #29225.
297
298 28 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
299
300 Only add files not managed by udev to device tarball, bug #57110.
301
302 28 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
303
304 Revert pam_console_apply udev check in bootmisc/halt.sh since
305 the bug is with pam_console_apply and not udev/pam.
306
307 Use ${EUID} instead of $(id -u) to help out BSD in runscript.sh.
308
309 Allow users to select ramfs instead of default tmpfs for mounting
310 on /dev with udev #69091.
311
312 Add issue.devfix which would be auto copied to /etc/issue if
313 /sbin/rc detects the user is missing /dev/null or /dev/console.
314 Includes a simple explanation/fix for what's wrong.
315
316 Make sure the clock init script runs after checkroot/modules/localmount
317 so that timestamps are synchronized asap #68133 / #70008.
318
319 Accept '-nc' as a short option to '--nocolor' #64736.
320
321 26 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
322
323 Don't use -A with fsck to respect the fs_passno since it'll try
324 to fsck all filesystems, not just the ones specified. Instead,
325 awk /etc/fstab to review the passno field in checkroot #68822.
326
327 Add support for 'gentoo=forcefsck' boot option in checkroot.
328
329 Make sure we run devfsd in /sbin/rc even when /dev has been
330 automounted by the kernel #68795.
331
332 Don't generate the device tarball in halt.sh with livecds #68469.
333
334 25 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
335
336 net-scripts/net.modules.d/ifconfig:
337 - Simplify ifconfig_is_up()
338 - Fix ifconfig_get_aliases_rev() to actually work... you can't
339 specify an interface name to ifconfig if you want to see the
340 aliases.
341 - Workaround a couple ifconfig bugs dealing with aliases
342 - Correct a return status in ifconfig_interface_del_addresses()
343 - ifconfig_iface_stop() is bool, not void; fix the comments
344
345 net-scripts/net.modules.d/iproute2:
346 - iproute2_iface_stop() is bool, not void. Fix the code so it
347 returns meaningful values
348
349 net-scripts/init.d/net.lo:
350 - Fix preferred (ifconfig/dhcpcd) module loading so it doesn't
351 barf when a preferred module is either (1) missing from
352 net.modules.d or (2) not available due to missing dependencies
353 - When loading all modules in order to stop an interface, only use
354 the first available to satisfy each class wrapper
355
356 24 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
357
358 Include livecd patch that was applied to baselayout-1.9.4-r6
359 to use agetty instead of mingetty
360
361 24 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
362
363 Mount tmpfs instead of ramfs on /dev when using udev systems.
364 The problem with ramfs is that it has no size limitations so
365 one could easily take down their machine by accident #68653.
366
367* rc-scripts 1.6.3 (23 Oct 2004)
368
369 22 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
370
371 Add support for user_eth0 in the adsl module and in net.example.
372 This means that most users won't need to edit pppoe.conf at all
373
374 21 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
375
376 Remove old etc/conf.d/net and try to clarify instructions in
377 net-scripts/conf.d/net.example. Add example for ADSL
378
379 21 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
380
381 Merge all of the UML checks into one function, is_uml_sys(),
382 which is now in functions.sh.
383
384 18 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
385
386 Add v-e-commands (veinfo, vbegin, etc) to sbin/functions.sh that
387 depend on RC_VERBOSE which defaults to no. Add --verbose to args
388 understood by runscript.sh.
389
390 In net.lo, use veinfo and friends when loading modules since this
391 information is confusing to users.
392
393 In net.lo, always load global "modules" setting in following
394 "modules_iface" since this is a little easier for users to
395 understand.
396
397 In net.lo, use eindent for output of pre/post scripts
398
399 18 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
400
401 Add shfs to our list of net filesystems #61452. Also add afs/nfs4.
402
403 Add a '-u' parameter to depscan.sh to allow for updates only when
404 the config files have changed. With /sbin/rc using this, we speed
405 up bootup by only regenerating the cache when need be #67976. Also
406 add a '-u' parameter to env-update.sh for same reasons.
407
408 Don't run depscan.sh in rc-update anymore since the cache files don't
409 depend on runlevels (which is all that rc-update modifies).
410
411 Add unicode support to keymaps/consolefont #32111 and UML support #29707.
412
413 Add checks to many filesystem operations in the eventuality that the
414 filesystems are mounted read only.
415
416 16 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
417
418 Update the default fstab /dev/shm mount to include the nodev, nosuid,
419 and noexec mount flags. No reason for the filesystem to have those.
420
421 Cleaned up the clock init script. Moved the clock options out of
422 rc.conf and into its own conf.d/clock file. Added support for the
423 weird Alpha consoles SRM/ARC since they need special config options.
424 Also made the syncing of system clock to hardware clock at shutdown
425 optional (with the default being off) #15834. Don't try to set the
426 clock if running inside a coLinux environment #52870.
427
428 Update default PATH ordering to try to follow default behavior in
429 other distro's and because it's logical that /usr/local should
430 override /usr which should override /. Fixes #12531.
431
432 Move devfs stuff out of baselayout and into the devfsd package.
433
434 Don't run /sbin/pam_console_apply -r if using udev on /dev #50315.
435
436 14 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
437
438 Fix rc-status to work with new COLS code.
439
440 14 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
441
442 Allow users to mount ramfs/tmpfs/ramdisk as their svcdir and
443 stop assuming ramfs==ramdisk #64079.
444
445 13 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
446
447 Rework the code for managing /dev to make it more flexible for
448 users. Some don't want to use devfs/udev but rather just create
449 their own nodes. Handles some issues with #44906 / #67276.
450
451 Move the utmp clearing code out of bootmisc and into /sbin/rc.
452 The utmp log must be cleared while in the initial boot level
453 (meaning inside /sbin/rc) because as soon as rc exists, init
454 writes a 'boot' record (`who -b`) which would normally be lost
455 when the bootmisc init.d script is run #61727.
456
457 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
458
459 Cosmetic fixes for starting loopback interface
460
461 SpanKY doesn't like the dots... disable them by default, but you
462 can set RC_DOT_PATTERN=' .' in /etc/conf.d/rc to get them back
463
464* rc-scripts 1.6.2 (13 Oct 2004)
465
466 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
467
468 Install net.modules.d to /lib/rcscripts instead of /etc so we
469 don't have to deal with CONFIG_PROTECT
470
471 Fix diff code in modules_load so it can identify which functions
472 have been modified
473
474 Fix fallback mechanism in iface_start so that it works correctly
475 and doesn't report a bogus error message when trying the fallback
476
477 Get rid of need_begin trickery in iface_stop
478
479 Simplify eend processing in dhcp modules
480
481 Implement eindent, eoutdent, esetdent in functions.sh and adjust
482 net-scripts to use them.
483
484 Re-write einfo, ewarn, eerror, ebegin, eend, ewend to use
485 RC_INDENTATION and to work better on serial terminals
486
487 Remove conf.d/net.ppp0 since that is provided by net-dialup/ppp
488
489 12 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
490
491 Fix ipaddr_fallback in net-scripts/conf.d/net.example
492
493 09 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
494
495 Remove init.d/net.eth0 net.lo and net.ppp0. The first two are
496 provided now by net-scripts and net.ppp0 is shipped in
497 net-dialup/ppp
498
499 Create NET_FS_LIST and is_net_fs in functions.sh and use them in
500 checkroot, localmount, netmount, net.example, and net.lo
501
502 09 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
503
504 If the hostname has already been set via the kernel/dhcp, don't
505 force it to 'localhost'. Used in netboot/terminal setups #38172.
506
507 Add domainname to default boot runlevel list #47041.
508
509 08 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
510
511 Make sure that when we try to mount /sys, we do so with -n (tigger).
512
513 Add some examples for nfs to sysctl.conf #66575.
514
515 06 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
516
517 Update to net-scripts 1.0.2 from Roy
518 ------------------------------------
519 - wireless module: replaced preferred_only var with
520 associate_order this makes more sense now as we have changed the
521 possible values
522 - wireless module: added patch from Daniel Zappala we should call
523 wireless_get_essid everywhere now
524 - wireless module: don't declare ESSID local in
525 wireless_configure(). This allows ESSID to be tested in the
526 user defined postup() function
527 - wireless module: test type != "NOT READY!" instead of testing =
528 IEEE. this resolves problems with intel and ra-tech drivers
529 - net.lo start() now errors when the interface does not exist
530 - dhcpcd, dhclient, udhcpc and pump now expose peer_* vars this
531 enables wireless to map them from peer_dns_ESSID
532 - config-system helper now loads wireless module to remap
533 variables from ESSID this allows udhcpc and dhclient to use
534 remapped wireless vars
535 - fixed dhcpcd and pump modules using peer_* vars
536 - wireless aborts after 5 seconds if it cannot report a valid
537 ESSID this fixes a potential infinite loop problem
538 - wireless_setup_iface() renamed to wireless_map_essid_vars() this
539 avoids confusion about what the function actually does
540
541 06 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
542
543 Change the default net.ipv4.conf.default.rp_filter setting to 1
544 in sysctl.conf since it shouldn't be harmful in anyway. Redhat
545 does the same.
546
547 05 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
548
549 Get rid of getcols() in sbin/functions.sh. Use COLUMNS when
550 possible and otherwise clean up the COLS code. Fix the "emerge
551 depend" detection code to use RC_ENDCOL="no"
552
553 05 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
554
555 Changed behavior of the domainname init.d script. It will now
556 override any settings obtained via dhcp/whatever. See #48277.
557
558 Updated bootmisc to dump the output of `dmesg` to /var/log/dmesg.
559 This way users have an 'after-boot' log of their dmesg saved
560 somewhere useful #55421.
561
562 Added the 'eend' back to depscan.sh since the script starts with a
563 call to 'ebegin' #59694.
564
565 Add selinux update from Chris PeBenito for src/runscript.c #64019.
566
567 Add more quoting to rc-help.sh to fix some non-critical errors.
568 Make rc-help.sh respect the value of RC_NOCOLOR. Allow RC_NOCOLOR
569 in functions.sh to be set via the environment.
570
571 Flesh out the default sysctl.conf with comments and more examples
572 since our previous one was pretty sparse #59993.
573
574 Change calls to `uniq` to `sort -u` in checkroot/halt.sh. This way
575 we only require sort in / and not both #36453.
576
577 04 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
578
579 More (I mean a LOT more) services. This takes care of #44458,
580 #52881 #55939 #58997 #66166 #66297. Gleaned many from the IANA
581 list/Fedora/FreeBSD/Debian.
582
583 Change the test for /proc/cmdline from -e to -r. On grsecurity
584 based systems for example, the file may exist, but not be readable
585 by non-root users (patch by Ned Ludd).
586
587 03 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
588
589 Add support for NFSv4 from #25106 to the netmount script. Don't
590 try to fsck / if the root is a remote filesystem (like NFS) #36624.
591
592 Update the fs_passno values in the default fstab to match the
593 settings suggested by the manpage #37314. Make checkroot respect
594 a fs_passno setting of 0 when dealing with / #39212. Change
595 default / filesystem type to ext3 instead of xfs #42670.
596
597 Re-order the arguments to mount to match POSIX requirements #66225.
598
599 Don't pipe swapon in localmount to /dev/null and ignore return
600 codes anymore. A swapon that works shows no output #39834.
601
602 02 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
603
604 Break up the COL/COLOR code properly this time. Not all serial
605 consoles can handle adjusting to the end of the line, so let's not
606 bother running stty at all anymore. This should fix up #32453.
607
608 30 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
609
610 Disable cryptfs by default in the conf.d file. Also cleanup
611 the output generated in localmount/checkfs/halt.sh for dm-crypt.
612 Add an extra check so that cryptfs is only run when the conf.d
613 file exists as well as /bin/cryptsetup.
614
615 29 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
616
617 Let glibc install nscd since different versions of glibc will
618 need to be handled differently. See #43076 by Rui Malheiro.
619
620 29 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
621
622 Prefer ~/.dir_colors over /etc/DIR_COLORS when it exists #64489
623
624 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
625
626 Clear the screen in .bash_logout #32330
627
628* rc-scripts 1.6.1 (27 Sep 2004)
629
630 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
631
632 Update dm-crypt to work with multi-line configuration files.
633 Also don't set status in a subshell; it was being lost before.
634
635 23 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
636
637 Rework the logic behind the $COLS code. It should not depend
638 on whether color is enabled. Also add a check for negative
639 values (like when using a serial console).
640
641* rc-scripts 1.6.0 (15 Sep 2004)
642
643 15 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
644
645 Fix bug 64034: simplify netmount script's stop function so that
646 mountpoints containing spaces work correctly
647
648 Update tarball.sh to use net-scripts
649
650 14 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
651
652 Commit dm-crypt enablement patch from Tigger (Rob Holland) in
653 bug 43146
654
655* rc-scripts 1.5.3 (18 Aug 2004)
656
657 18 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
658
659 Fix bug 60719 (request for better error messages from runscript)
660 by allowing errors to show on the screen when they're encountered
661 in wrap_rcscript
662
663 Apply Spock's bootsplash patch from bug 45784. This moves most of
664 the splash functionality out of baselayout.
665
666 13 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
667
668 Don't export PS1. Continuation of bug 26951, comments 60-62.
669
670* rc-scripts 1.5.2 (02 Aug 2004)
671
672 02 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
673
674 Related to bug 38955, don't set INPUTRC. Instead patch bash so
675 that it looks for /etc/inputrc automatically if ~/.inputrc is
676 missing. This is better than using INPUTRC since that will
677 override even after the user creates ~/.inputrc.
678
679 Fix bug 54275: Don't set INFODIR. The correct variable used by
680 texinfo is INFOPATH, which is already set in 00basic. Setting
681 INFODIR is useless, and breaks a NetBSD cross compile from Gentoo
682
683 01 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
684
685 Fix bug 58805: net.eth0 should use bridge so that bridge
686 interfaces are configured prior to net.br0 running
687
688 Fix bug 56856: Get rid of net.rej and integrate missing stuff to
689 conf.d/net
690
691 Apply half of spock's patch in bug 45784: Check for
692 conf.d/bootsplash instead of conf.d/bootsplash.conf
693
694 Fix bug 51351: Quote parsed output of /proc/filesystems to handle
695 octal sequences in mountpoint such as encoded spaces (\040)
696
697 Fix bug 46680: Add cifs support to localmount and netmount.
698 Thanks to Ronald Moesbergen for the patches
699
700 21 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
701
702 Fix bug 26952: Use /etc/bash/bashrc to setup PS1, testing $- to
703 determine if shell is interactive. The new system-wide bashrc is
704 installed by bash-2.05b-r10
705
706 19 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
707
708 Fix bug 38743: strip leading and trailing spaces from variable
709 values in genenviron.awk. Thanks to Marius Mauch for the patch.
710
711 09 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
712
713 Fix bug 55576: swap words "start" and "stop" in runscript.sh error
714 message
715
716* rc-scripts 1.5.1 (28 Jun 2004)
717
718 28 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
719
720 Fix dhcp in iface_start_ifconfig: It was re-using the variable
721 ${i} which would result in the following error:
722 /sbin/runscript.sh: line 441: ((: 16.141.88.153: syntax error
723 in expression (error token is ".141.88.153")
724
725 Use vlan_IFACE instead of iface_IFACE_vlans in net.eth0 for more
726 consistent vlan configuration. Thanks to robbat2 in bug 55394
727 (not fully resolved)
728
729 Add example for checking if root filesystem is NFS-mounted via
730 predown function in conf.d/net for bug 53104. This might be
731 better integrated at some point into net.eth0
732
733* rc-scripts 1.5.0 (26 Jun 2004)
734
735 26 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
736
737 Fix bug 47659: support iproute2-style configuration. Thanks to
738 Dean Bailey for some fantastic patches, including documentation
739 for conf.d/net. This is a pretty huge re-write of net.eth0
740
741 Fix bug 34607: provide examples for in conf.d/net for preup,
742 postup, predown, postdown functions. Also pay attention to return
743 value from predown function (previously ignored)
744
745 15 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
746
747 Fix bug 25975: support adsl in net.eth0. Thanks to Patrick McLean
748 for the initial pass at the code.
749
750 Fix bug 34140: add --servicelist option to rc-status. Thanks to
751 Eldad Zack for the patch.
752
753 Fix bug 37418: fix order of LVM and RAID in checkfs. Thanks to
754 Raimondo Giammanco for the patch.
755
756* rc-scripts 1.4.16 (06 Jun 2004)
757
758 06 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
759
760 Only call generate-modprobe.conf with --assume-kernel if
761 modules-update was called with --assume-kernel. This means that
762 only catalyst has the dependency on module-init-tools, not
763 everybody with the newer baselayout
764
765* rc-scripts 1.4.15 (21 May 2004)
766
767 21 May 2004; Aron Grifis <agriffis@gentoo.org>:
768
769 Fix bug 51570: typo on line 161 of /sbin/livecd-functions.sh
770
771 Fix bug 51626: wrong variable declaration at top of
772 get_bootparam() in /sbin/functions.sh
773
774* rc-scripts 1.4.14 (17 May 2004)
775
776 17 May 2004; Aron Griffis <agriffis@gentoo.org>:
777
778 Bump version to 1.4.14 to push out gmsoft's fix for hppa console
779 on ttyB0
780
781* rc-scripts 1.4.13 (15 May 2004)
782
783 15 May 2004; Aron Griffis <agriffis@gentoo.org>:
784
785 Bump version to 1.4.13 to push out Gustavo's livecd serial console
786 fixes for sparc and hppa.
787
788* rc-scripts 1.4.12 (07 May 2004)
789
790 10 May 2004; Aron Griffis <agriffis@gentoo.org>:
791
792 Bump version to 1.4.12 to release these critical bug fixes
793
794 Fix bug 50434: The new version of start-stop-daemon changes
795 directory to / by default unless --chdir is specified. Revert
796 this behavior to maintain working directory. This fixes openvpn
797 startup (probably among other things). Thanks to Sven Wegener for
798 the patch.
799
800 Fix bug 50448: Four days ago I changed bash loops to use the wrong
801 conditional syntax in net.eth0. Thanks to Sven Wegener for
802 pointing out the problem and providing a patch.
803
804* rc-scripts 1.4.11 (07 May 2004)
805
806 07 May 2004; Aron Griffis <agriffis@gentoo.org>:
807
808 Fix bug 20597: Skip RCS files when updating modules
809
810 Fix bug 49926: Add a --assume-kernel flag to modules-update. This
811 requires a companion patch in module-init-tools-3.0-r2 to handle
812 the same flag in generate-modprobe.conf; this dependency won't be
813 handled in the baselayout ebuild since it only affects livecd
814 building.
815
816 06 May 2004; Aron Griffis <agriffis@gentoo.org>:
817
818 In net.eth0, fix many instances of loops like "for ((i = 0; i <
819 100; i = i + 1))". The problem here is that the middle comparison
820 is being interpreted as a bash conditional, which means that it's
821 doing string comparison by default. It needs to be "i -lt 100"
822
823 Fix bug 34827: net.eth0 breaks when localized because the ifconfig
824 output changes. Wrap ifconfig in a function that overrides
825 LC_ALL=C
826
827 Fix bug 48305: Provide a new network configuration variable
828 ifconfig_fallback_eth0 which allows one to specify a fallback
829 configuration in case DHCP fails.
830
831 Fix bug 50246: Give root an invalid password ("*" in /etc/shadow)
832 in the default baselayout. This prevents the first reboot after
833 installation from having a blank password.
834
835 05 May 2004; Aron Griffis <agriffis@gentoo.org>:
836
837 Fix bug 48595: Make sure $(id -u) is zero (root user) when running
838 init scripts to avoid a lot of error messages.
839
840 Replace many lines of awk with two lines of grep in
841 init.d/localmount
842
843 Fix bug 44316: Use 0644 instead of 0640 for resolv.conf in net.ppp0
844
845 03 May 2004; Aron Griffis <agriffis@gentoo.org>:
846
847 Update to version 1.10.20 of Debian's start-stop-daemon (contained
848 in dpkg at http://packages.debian.org/testing/base/dpkg). This
849 fixes bug 22686 (start-stop-daemon in baselayout doesn't allow
850 altered nicelevel).
851
852* rc-scripts 1.4.10 (25 Apr 2004)
853
854 25 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
855
856 Fix typos in sbin/rc: "try try mount" and "mount ... & >/dev/null"
857 Also removed the errstr double-checking since the need for that is
858 alleviated by these typo fixes.
859
860 23 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
861
862 Fix bug 48629 (/sbin/rc fixups for udev) with patch from GregKH
863
864 Fix bug 40987 (gentoo should be able to boot with an empty /dev)
865 with patch from Spanky. The patch avoids redirection to /dev/null
866 when it doesn't exist; this was breaking /sbin/rc.
867
868* rc-scripts 1.4.9 (15 Apr 2004)
869
870 15 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
871
872 Fix bug 47111 (severe depcache problems) with tons of help from
873 dswhite42 and the rest of the crew in that bug. Thanks guys!
874
875* rc-scripts 1.4.8 (14 Apr 2004)
876
877 14 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
878
879 Fix bug 47623 (error removing inet6 addresses) with patch provided
880 by Vlad Yasevich.
881
882* rc-scripts 1.4.7 (12 Apr 2004)
883
884 12 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
885
886 Fix bug 47218 (net.eth0 broken for vlans) with patch provided by
887 Andy Dustman. Fix bug 47250 (depscan.sh fails to create
888 /var/lib/init.d/* directories) with patch from Terje Bergström.
889
890* rc-scripts 1.4.6 (08 Apr 2004)
891
892 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
893
894 Update patch from Gustavoz; -ln /bin/bash should have been -nl /bin/bash
895
896* rc-scripts 1.4.5 (08 Apr 2004)
897
898 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
899
900 Patch init.d/checkroot to list / (root) only once in mtab; see bug 38360.
901 Patch from Gustavoz to livecd-functions.sh to run bash instead of login on
902 serial consoles, necessary due to scrambled root passwords.
903
904* rc-scripts 1.4.4 (07 Apr 2004)
905
906 07 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
907
908 Patch from Gustavoz for Sparc console: Fetch LIVECD_CONSOLE from dmesg
909 output. Also support 4800 baud correctly.
910
911 16 Mar 2004; Aron Griffis <agriffis@gentoo.org>:
912
913 The changes in this commit pertain primarily to
914 http://bugs.gentoo.org/show_bug.cgi?id=19695
915 http://bugs.gentoo.org/show_bug.cgi?id=35736
916
917 Specify routes as an array per interface, for example:
918 routes_eth0=(
919 "-net 10.1.0.0 netmask 255.255.0.0 gw 10.0.0.5"
920 "-net 10.2.0.0 netmask 255.255.0.0 gw 10.0.0.6"
921 "-host 10.3.0.1 dev eth0"
922 )
923
924 You can optionally use the gateway variable or just put the default route
925 in the routes variable. The following two are REDUNDANT:
926
927 routes_eth0=( "default gw 10.0.0.5" )
928 gateway="eth0/10.0.0.5"
929
930 Old configuration variables in /etc/conf.d/net are fully supported and
931 used transparently if ifconfig_eth0 is missing. In other words, this new
932 script is fully backward-compatible. However you can get rid of
933 iface_eth0, alias_eth0, broadcast_eth0 and netmask_eth0 if you want by
934 using the new syntax:
935
936 ifconfig_eth0=(
937 "10.0.0.6 broadcast 10.0.255.255 netmask 255.255.0.0"
938 "192.168.1.1 netmask 255.255.255.0"
939 "123.456.789.1"
940 )
941
942 Full backward compatibility so no danger to screwing up users relying on
943 existing /etc/conf.d/net setup
944
945 NET_DEBUG can be set in the environment for copious debugging output
946
947 Deprecate [ ] in favor of [[ ]] which has fewer quoting issues and
948 better functionality (and is even slightly faster)
949
950 Properly localize all variables, including variables returned by
951 setup_vars
952
953 Allow full options for every ifconfig command, both base address and
954 aliases via ifconfig_eth0, replacing the convoluted and less-functional
955 iface_eth0, alias_eth0, broadcast_eth0, netmask_eth0
956
957 Provide full support for static routes via routes_eth0
958
959 Fix potential quoting problems in setup_vars by using better eval syntax
960 instead of eval echo
961
962 Display IP addresses while configuring, both DHCP-retrieved and
963 statically set addresses
964
965 Collapse redundant caching of $? since eend returns $? again
966
967 Report when keeping kernel configuration for an interface along with IP
968 address gleaned
969
970 Don't reset the default gateway if it is already set correctly
971
972 Don't bind default gateway to particular interface when /sbin/route is
973 called so that it can survive if there is more than one interface on the
974 required subnet. (Old behavior can be obtained by setting
975 routes_eth0="default gw 1.2.3.4 dev eth0" if you really want it)
976
977 Don't bomb if default gateway can't be set since that doesn't
978 necessarily mean that the interface configuration is invalid.
979 (Old behavior was completely broken, but commented section
980 demonstrates how to do it right if necessary)
981
982 iface_stop no longer relies on configuration in /etc/conf.d/net AT ALL.
983 This is very good because it means you can put new configuration in
984 /etc/conf.d/net, then restart the interface and the old configuration will
985 be properly shut down.
986
987 iface_stop reports when it is releasing the DHCP lease
988
989* rc-scripts 1.4.3.13p1 (26 Feb 2004)
990
991 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
992
993 Remove /etc/DIR_COLORS, as coreutils provides it now.
994
995 Add RC_DEVICE_TARBALL to /etc/conf.d/rc to control use of device tarball.
996 Also modified /sbin/rc and /etc/init.d/halt.sh for this.
997
998 Start udevd if present.
999
1000 Small fix to sbin/rc-services.sh related to mtime checking and 'net'
1001 virtual service - it had no mtime generated, so check_mtime() failed
1002 for it ...
1003
1004 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
1005
1006 Update to enable checking of mtimes on rc-scripts, and auto running
1007 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO
1008 is not set instead of just erroring.
1009
1010 19 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
1011
1012 Fix irda type-o in /sbin/MAKEDEV, thanks to Tobias Sager <moixa@gmx.ch>.
1013
1014 Fix type-o in /etc/initrc, bug #41666 (Tom Vergote <bugzilla@tomvergote.be>).
4 1015
5 15 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1016 15 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
6 1017
7 Add RC_TTY_NUMBER to /etc/conf.d/rc to configure how many tty devices 1018 Add RC_TTY_NUMBER to /etc/conf.d/rc to configure how many tty devices
8 are used in scripts such as consolefonts, numlock, etc. This should 1019 are used in scripts such as consolefonts, numlock, etc. This should
9 close bug #39863. 1020 close bug #39863.
1021
1022 Fix type-o in /etc/init.d/consolefont, bug #40938, thanks to patch from
1023 Cory Tusar <ctusar@adelphia.net>.
10 1024
11 09 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1025 09 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
12 1026
13 Add SELinux modifications to /sbin/runscript. This allows runscript to 1027 Add SELinux modifications to /sbin/runscript. This allows runscript to
14 make sure it is running in the right domain. Patch done by 1028 make sure it is running in the right domain. Patch done by
1376 2390
1377 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified 2391 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified
1378 /etc/env.d/00basic for this. 2392 /etc/env.d/00basic for this.
1379 2393
1380 Add some new daemon stop and pid detection stuff to /sbin/functions.sh. 2394 Add some new daemon stop and pid detection stuff to /sbin/functions.sh.
1381 Nothing official, but I spent enouth time on it not to want to loose it :) 2395 Nothing official, but I spent enough time on it not to want to loose it :)
1382 2396
1383 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs 2397 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs
1384 to give output to stderr. This was caused by a call to "stty", which when 2398 to give output to stderr. This was caused by a call to "stty", which when
1385 run without a attatched terminal, have this effect. Basically just pipe 2399 run without a attatched terminal, have this effect. Basically just pipe
1386 stderr to /dev/null. 2400 stderr to /dev/null.

Legend:
Removed from v.1.319  
changed lines
  Added in v.1.503

  ViewVC Help
Powered by ViewVC 1.1.20