/[gentoo-src]/rc-scripts/ChangeLog
Gentoo

Diff of /rc-scripts/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.324 Revision 1.411
1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts 1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts
2# Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL 2# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPL
3# Written by Daniel Robbins (drobbins@gentoo.org) 3# Written by Daniel Robbins (drobbins@gentoo.org)
4 4
5 08 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
6
7 Make sure that when we try to mount /sys, we do so with -n (tigger).
8
9 06 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
10
11 Update to net-scripts 1.0.2 from Roy
12 ------------------------------------
13 - wireless module: replaced preferred_only var with
14 associate_order this makes more sense now as we have changed the
15 possible values
16 - wireless module: added patch from Daniel Zappala we should call
17 wireless_get_essid everywhere now
18 - wireless module: don't declare ESSID local in
19 wireless_configure(). This allows ESSID to be tested in the
20 user defined postup() function
21 - wireless module: test type != "NOT READY!" instead of testing =
22 IEEE. this resolves problems with intel and ra-tech drivers
23 - net.lo start() now errors when the interface does not exist
24 - dhcpcd, dhclient, udhcpc and pump now expose peer_* vars this
25 enables wireless to map them from peer_dns_ESSID
26 - config-system helper now loads wireless module to remap
27 variables from ESSID this allows udhcpc and dhclient to use
28 remapped wireless vars
29 - fixed dhcpcd and pump modules using peer_* vars
30 - wireless aborts after 5 seconds if it cannot report a valid
31 ESSID this fixes a potential infinite loop problem
32 - wireless_setup_iface() renamed to wireless_map_essid_vars() this
33 avoids confusion about what the function actually does
34
35 06 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
36
37 Change the default net.ipv4.conf.default.rp_filter setting to 1
38 in sysctl.conf since it shouldn't be harmful in anyway. Redhat
39 does the same.
40
41 05 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
42
43 Get rid of getcols() in sbin/functions.sh. Use COLUMNS when
44 possible and otherwise clean up the COLS code. Fix the "emerge
45 depend" detection code to use RC_ENDCOL="no"
46
47 05 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
48
49 Changed behavior of the domainname init.d script. It will now
50 override any settings obtained via dhcp/whatever. See #48277.
51
52 Updated bootmisc to dump the output of `dmesg` to /var/log/dmesg.
53 This way users have an 'after-boot' log of their dmesg saved
54 somewhere useful #55421.
55
56 Added the 'eend' back to depscan.sh since the script starts with a
57 call to 'ebegin' #59694.
58
59 Add selinux update from Chris PeBenito for src/runscript.c #64019.
60
61 Add more quoting to rc-help.sh to fix some non-critical errors.
62 Make rc-help.sh respect the value of RC_NOCOLOR. Allow RC_NOCOLOR
63 in functions.sh to be set via the environment.
64
65 Flesh out the default sysctl.conf with comments and more examples
66 since our previous one was pretty sparse #59993.
67
68 Change calls to `uniq` to `sort -u` in checkroot/halt.sh. This way
69 we only require sort in / and not both #36453.
70
71 04 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
72
73 More (I mean a LOT more) services. This takes care of #44458,
74 #52881 #55939 #58997 #66166 #66297. Gleaned many from the IANA
75 list/Fedora/FreeBSD/Debian.
76
77 Change the test for /proc/cmdline from -e to -r. On grsecurity
78 based systems for example, the file may exist, but not be readable
79 by non-root users (patch by Ned Ludd).
80
81 03 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
82
83 Add support for NFSv4 from #25106 to the netmount script. Don't
84 try to fsck / if the root is a remote filesystem (like NFS) #36624.
85
86 Update the fs_passno values in the default fstab to match the
87 settings suggested by the manpage #37314. Make checkroot respect
88 a fs_passno setting of 0 when dealing with / #39212. Change
89 default / filesystem type to ext3 instead of xfs #42670.
90
91 Re-order the arguements to mount to match POSIX requirements #66225.
92
93 Don't pipe swapon in localmount to /dev/null and ignore return
94 codes anymore. A swapon that works shows no output #39834.
95
96 02 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
97
98 Break up the COL/COLOR code properly this time. Not all serial
99 consoles can handle adjusting to the end of the line, so let's not
100 bother running stty at all anymore. This should fix up #32453.
101
102 30 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
103
104 Disable cryptfs by default in the conf.d file. Also cleanup
105 the output generated in localmount/checkfs/halt.sh for dm-crypt.
106 Add an extra check so that cryptfs is only run when the conf.d
107 file exists as well as /bin/cryptsetup.
108
109 29 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
110
111 Let glibc install nscd since different versions of glibc will
112 need to be handled differently. See #43076 by Rui Malheiro.
113
114 29 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
115
116 Prefer ~/.dir_colors over /etc/DIR_COLORS when it exists #64489
117
118 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
119
120 Clear the screen in .bash_logout #32330
121
122* rc-scripts 1.6.1 (27 Sep 2004)
123
124 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
125
126 Update dm-crypt to work with multi-line configuration files.
127 Also don't set status in a subshell; it was being lost before.
128
129 23 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
130
131 Rework the logic behind the $COLS code. It should not depend
132 on whether color is enabled. Also add a check for negative
133 values (like when using a serial console).
134
135* rc-scripts 1.6.0 (15 Sep 2004)
136
137 15 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
138
139 Fix bug 64034: simplify netmount script's stop function so that
140 mountpoints containing spaces work correctly
141
142 Update tarball.sh to use net-scripts
143
144 14 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
145
146 Commit dm-crypt enablement patch from Tigger (Rob Holland) in
147 bug 43146
148
149* rc-scripts 1.5.3 (18 Aug 2004)
150
151 18 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
152
153 Fix bug 60719 (request for better error messages from runscript)
154 by allowing errors to show on the screen when they're encountered
155 in wrap_rcscript
156
157 Apply Spock's bootsplash patch from bug 45784. This moves most of
158 the splash functionality out of baselayout.
159
160 13 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
161
162 Don't export PS1. Continuation of bug 26951, comments 60-62.
163
164* rc-scripts 1.5.2 (02 Aug 2004)
165
166 02 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
167
168 Related to bug 38955, don't set INPUTRC. Instead patch bash so
169 that it looks for /etc/inputrc automatically if ~/.inputrc is
170 missing. This is better than using INPUTRC since that will
171 override even after the user creates ~/.inputrc.
172
173 Fix bug 54275: Don't set INFODIR. The correct variable used by
174 texinfo is INFOPATH, which is already set in 00basic. Setting
175 INFODIR is useless, and breaks a NetBSD cross compile from Gentoo
176
177 01 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
178
179 Fix bug 58805: net.eth0 should use bridge so that bridge
180 interfaces are configured prior to net.br0 running
181
182 Fix bug 56856: Get rid of net.rej and integrate missing stuff to
183 conf.d/net
184
185 Apply half of spock's patch in bug 45784: Check for
186 conf.d/bootsplash instead of conf.d/bootsplash.conf
187
188 Fix bug 51351: Quote parsed output of /proc/filesystems to handle
189 octal sequences in mountpoint such as encoded spaces (\040)
190
191 Fix bug 46680: Add cifs support to localmount and netmount.
192 Thanks to Ronald Moesbergen for the patches
193
194 21 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
195
196 Fix bug 26952: Use /etc/bash/bashrc to setup PS1, testing $- to
197 determine if shell is interactive. The new system-wide bashrc is
198 installed by bash-2.05b-r10
199
200 19 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
201
202 Fix bug 38743: strip leading and trailing spaces from variable
203 values in genenviron.awk. Thanks to Marius Mauch for the patch.
204
205 09 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
206
207 Fix bug 55576: swap words "start" and "stop" in runscript.sh error
208 message
209
210* rc-scripts 1.5.1 (28 Jun 2004)
211
212 28 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
213
214 Fix dhcp in iface_start_ifconfig: It was re-using the variable
215 ${i} which would result in the following error:
216 /sbin/runscript.sh: line 441: ((: 16.141.88.153: syntax error
217 in expression (error token is ".141.88.153")
218
219 Use vlan_IFACE instead of iface_IFACE_vlans in net.eth0 for more
220 consistent vlan configuration. Thanks to robbat2 in bug 55394
221 (not fully resolved)
222
223 Add example for checking if root filesystem is NFS-mounted via
224 predown function in conf.d/net for bug 53104. This might be
225 better integrated at some point into net.eth0
226
227* rc-scripts 1.5.0 (26 Jun 2004)
228
229 26 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
230
231 Fix bug 47659: support iproute2-style configuration. Thanks to
232 Dean Bailey for some fantastic patches, including documentation
233 for conf.d/net. This is a pretty huge re-write of net.eth0
234
235 Fix bug 34607: provide examples for in conf.d/net for preup,
236 postup, predown, postdown functions. Also pay attention to return
237 value from predown function (previously ignored)
238
239 15 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
240
241 Fix bug 25975: support adsl in net.eth0. Thanks to Patrick McLean
242 for the initial pass at the code.
243
244 Fix bug 34140: add --servicelist option to rc-status. Thanks to
245 Eldad Zack for the patch.
246
247 Fix bug 37418: fix order of LVM and RAID in checkfs. Thanks to
248 Raimondo Giammanco for the patch.
249
250* rc-scripts 1.4.16 (06 Jun 2004)
251
252 06 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
253
254 Only call generate-modprobe.conf with --assume-kernel if
255 modules-update was called with --assume-kernel. This means that
256 only catalyst has the dependency on module-init-tools, not
257 everybody with the newer baselayout
258
259* rc-scripts 1.4.15 (21 May 2004)
260
261 21 May 2004; Aron Grifis <agriffis@gentoo.org>:
262
263 Fix bug 51570: typo on line 161 of /sbin/livecd-functions.sh
264
265 Fix bug 51626: wrong variable declaration at top of
266 get_bootparam() in /sbin/functions.sh
267
268* rc-scripts 1.4.14 (17 May 2004)
269
270 17 May 2004; Aron Griffis <agriffis@gentoo.org>:
271
272 Bump version to 1.4.14 to push out gmsoft's fix for hppa console
273 on ttyB0
274
275* rc-scripts 1.4.13 (15 May 2004)
276
277 15 May 2004; Aron Griffis <agriffis@gentoo.org>:
278
279 Bump version to 1.4.13 to push out Gustavo's livecd serial console
280 fixes for sparc and hppa.
281
282* rc-scripts 1.4.12 (07 May 2004)
283
284 10 May 2004; Aron Griffis <agriffis@gentoo.org>:
285
286 Bump version to 1.4.12 to release these critical bug fixes
287
288 Fix bug 50434: The new version of start-stop-daemon changes
289 directory to / by default unless --chdir is specified. Revert
290 this behavior to maintain working directory. This fixes openvpn
291 startup (probably among other things). Thanks to Sven Wegener for
292 the patch.
293
294 Fix bug 50448: Four days ago I changed bash loops to use the wrong
295 conditional syntax in net.eth0. Thanks to Sven Wegener for
296 pointing out the problem and providing a patch.
297
298* rc-scripts 1.4.11 (07 May 2004)
299
300 07 May 2004; Aron Griffis <agriffis@gentoo.org>:
301
302 Fix bug 20597: Skip RCS files when updating modules
303
304 Fix bug 49926: Add a --assume-kernel flag to modules-update. This
305 requires a companion patch in module-init-tools-3.0-r2 to handle
306 the same flag in generate-modprobe.conf; this dependency won't be
307 handled in the baselayout ebuild since it only affects livecd
308 building.
309
310 06 May 2004; Aron Griffis <agriffis@gentoo.org>:
311
312 In net.eth0, fix many instances of loops like "for ((i = 0; i <
313 100; i = i + 1))". The problem here is that the middle comparison
314 is being interpreted as a bash conditional, which means that it's
315 doing string comparison by default. It needs to be "i -lt 100"
316
317 Fix bug 34827: net.eth0 breaks when localized because the ifconfig
318 output changes. Wrap ifconfig in a function that overrides
319 LC_ALL=C
320
321 Fix bug 48305: Provide a new network configuration variable
322 ifconfig_fallback_eth0 which allows one to specify a fallback
323 configuration in case DHCP fails.
324
325 Fix bug 50246: Give root an invalid password ("*" in /etc/shadow)
326 in the default baselayout. This prevents the first reboot after
327 installation from having a blank password.
328
329 05 May 2004; Aron Griffis <agriffis@gentoo.org>:
330
331 Fix bug 48595: Make sure $(id -u) is zero (root user) when running
332 init scripts to avoid a lot of error messages.
333
334 Replace many lines of awk with two lines of grep in
335 init.d/localmount
336
337 Fix bug 44316: Use 0644 instead of 0640 for resolv.conf in net.ppp0
338
339 03 May 2004; Aron Griffis <agriffis@gentoo.org>:
340
341 Update to version 1.10.20 of Debian's start-stop-daemon (contained
342 in dpkg at http://packages.debian.org/testing/base/dpkg). This
343 fixes bug 22686 (start-stop-daemon in baselayout doesn't allow
344 altered nicelevel).
345
346* rc-scripts 1.4.10 (25 Apr 2004)
347
348 25 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
349
350 Fix typos in sbin/rc: "try try mount" and "mount ... & >/dev/null"
351 Also removed the errstr double-checking since the need for that is
352 alleviated by these typo fixes.
353
354 23 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
355
356 Fix bug 48629 (/sbin/rc fixups for udev) with patch from GregKH
357
358 Fix bug 40987 (gentoo should be able to boot with an empty /dev)
359 with patch from Spanky. The patch avoids redirection to /dev/null
360 when it doesn't exist; this was breaking /sbin/rc.
361
362* rc-scripts 1.4.9 (15 Apr 2004)
363
364 15 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
365
366 Fix bug 47111 (severe depcache problems) with tons of help from
367 dswhite42 and the rest of the crew in that bug. Thanks guys!
368
369* rc-scripts 1.4.8 (14 Apr 2004)
370
371 14 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
372
373 Fix bug 47623 (error removing inet6 addresses) with patch provided
374 by Vlad Yasevich.
375
376* rc-scripts 1.4.7 (12 Apr 2004)
377
378 12 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
379
380 Fix bug 47218 (net.eth0 broken for vlans) with patch provided by
381 Andy Dustman. Fix bug 47250 (depscan.sh fails to create
382 /var/lib/init.d/* directories) with patch from Terje Bergström.
383
384* rc-scripts 1.4.6 (08 Apr 2004)
385
386 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
387
388 Update patch from Gustavoz; -ln /bin/bash should have been -nl /bin/bash
389
390* rc-scripts 1.4.5 (08 Apr 2004)
391
392 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
393
394 Patch init.d/checkroot to list / (root) only once in mtab; see bug 38360.
395 Patch from Gustavoz to livecd-functions.sh to run bash instead of login on
396 serial consoles, necessary due to scrambled root passwords.
397
398* rc-scripts 1.4.4 (07 Apr 2004)
399
400 07 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
401
402 Patch from Gustavoz for Sparc console: Fetch LIVECD_CONSOLE from dmesg
403 output. Also support 4800 baud correctly.
404
405 16 Mar 2004; Aron Griffis <agriffis@gentoo.org>:
406
407 The changes in this commit pertain primarily to
408 http://bugs.gentoo.org/show_bug.cgi?id=19695
409 http://bugs.gentoo.org/show_bug.cgi?id=35736
410
411 Specify routes as an array per interface, for example:
412 routes_eth0=(
413 "-net 10.1.0.0 netmask 255.255.0.0 gw 10.0.0.5"
414 "-net 10.2.0.0 netmask 255.255.0.0 gw 10.0.0.6"
415 "-host 10.3.0.1 dev eth0"
416 )
417
418 You can optionally use the gateway variable or just put the default route
419 in the routes variable. The following two are REDUNDANT:
420
421 routes_eth0=( "default gw 10.0.0.5" )
422 gateway="eth0/10.0.0.5"
423
424 Old configuration variables in /etc/conf.d/net are fully supported and
425 used transparently if ifconfig_eth0 is missing. In other words, this new
426 script is fully backward-compatible. However you can get rid of
427 iface_eth0, alias_eth0, broadcast_eth0 and netmask_eth0 if you want by
428 using the new syntax:
429
430 ifconfig_eth0=(
431 "10.0.0.6 broadcast 10.0.255.255 netmask 255.255.0.0"
432 "192.168.1.1 netmask 255.255.255.0"
433 "123.456.789.1"
434 )
435
436 Full backward compatibility so no danger to screwing up users relying on
437 existing /etc/conf.d/net setup
438
439 NET_DEBUG can be set in the environment for copious debugging output
440
441 Deprecate [ ] in favor of [[ ]] which has fewer quoting issues and
442 better functionality (and is even slightly faster)
443
444 Properly localize all variables, including variables returned by
445 setup_vars
446
447 Allow full options for every ifconfig command, both base address and
448 aliases via ifconfig_eth0, replacing the convoluted and less-functional
449 iface_eth0, alias_eth0, broadcast_eth0, netmask_eth0
450
451 Provide full support for static routes via routes_eth0
452
453 Fix potential quoting problems in setup_vars by using better eval syntax
454 instead of eval echo
455
456 Display IP addresses while configuring, both DHCP-retrieved and
457 statically set addresses
458
459 Collapse redundant caching of $? since eend returns $? again
460
461 Report when keeping kernel configuration for an interface along with IP
462 address gleaned
463
464 Don't reset the default gateway if it is already set correctly
465
466 Don't bind default gateway to particular interface when /sbin/route is
467 called so that it can survive if there is more than one interface on the
468 required subnet. (Old behavior can be obtained by setting
469 routes_eth0="default gw 1.2.3.4 dev eth0" if you really want it)
470
471 Don't bomb if default gateway can't be set since that doesn't
472 necessarily mean that the interface configuration is invalid.
473 (Old behavior was completely broken, but commented section
474 demonstrates how to do it right if necessary)
475
476 iface_stop no longer relies on configuration in /etc/conf.d/net AT ALL.
477 This is very good because it means you can put new configuration in
478 /etc/conf.d/net, then restart the interface and the old configuration will
479 be properly shut down.
480
481 iface_stop reports when it is releasing the DHCP lease
482
483* rc-scripts 1.4.3.13p1 (26 Feb 2004)
484
5 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 485 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
6 486
7 Remove /etc/DIR_COLORS, as coreutils provides it now. 487 Remove /etc/DIR_COLORS, as coreutils provides it now.
488
489 Add RC_DEVICE_TARBALL to /etc/conf.d/rc to control use of device tarball.
490 Also modified /sbin/rc and /etc/init.d/halt.sh for this.
491
492 Start udevd if present.
493
494 Small fix to sbin/rc-services.sh related to mtime checking and 'net'
495 virtual service - it had no mtime generated, so check_mtime() failed
496 for it ...
8 497
9 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 498 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
10 499
11 Update to enable checking of mtimes on rc-scripts, and auto running 500 Update to enable checking of mtimes on rc-scripts, and auto running
12 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO 501 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO
1395 1884
1396 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified 1885 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified
1397 /etc/env.d/00basic for this. 1886 /etc/env.d/00basic for this.
1398 1887
1399 Add some new daemon stop and pid detection stuff to /sbin/functions.sh. 1888 Add some new daemon stop and pid detection stuff to /sbin/functions.sh.
1400 Nothing official, but I spent enouth time on it not to want to loose it :) 1889 Nothing official, but I spent enough time on it not to want to loose it :)
1401 1890
1402 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs 1891 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs
1403 to give output to stderr. This was caused by a call to "stty", which when 1892 to give output to stderr. This was caused by a call to "stty", which when
1404 run without a attatched terminal, have this effect. Basically just pipe 1893 run without a attatched terminal, have this effect. Basically just pipe
1405 stderr to /dev/null. 1894 stderr to /dev/null.

Legend:
Removed from v.1.324  
changed lines
  Added in v.1.411

  ViewVC Help
Powered by ViewVC 1.1.20