/[gentoo-src]/rc-scripts/ChangeLog
Gentoo

Diff of /rc-scripts/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.324 Revision 1.500
1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts 1# ChangeLog for Gentoo System Intialization ("rc") scripts
2# Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL 2# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPLv2
3# Written by Daniel Robbins (drobbins@gentoo.org) 3
4 17 Nov 2004; Roy Marples <uberlord@gentoo.org>:
5 Fixed invalid variable handling in bonding and vlan - bug #71419
6 apipa now brings the interface up before testing if address exists
7 Updated bonding documentation - bug #71419
8 Fixed iproute2 adding addresses for vlans - bug #71419
9 ifconfig handle inet6 routing automatically - bug #33310
10 ifconfig - fixed old gateway + gateway in routes conflict
11 iproute2 cleaned up some functions
12
13 16 Nov 2004; Roy Marples <uberlord@gentoo.org>:
14
15 We no longer default a fallback to APIPA when no config is given
16 net.example fleshed out a bit more for dhcpcd - fixes #60845
17 Improved forced module handling a touch
18 modules_sort and modules_check_user in net.lo buffer _provides,
19 _before and _after in arrays to avoid shelling out
20
21 15 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
22
23 Add a check to clock init.d to make sure users dont try to set
24 config their clock in rc.conf anymore.
25
26 Redo hostname/domainname scripts to use files in /etc/conf.d/
27 instead of creating files in /etc/. Allows for controlling things
28 like the behavior of setting the 'domain' in resolv.conf since users
29 may not always understand exactly what's going on.
30
31 Stop referring to conf.d/basic as a global rc config option. That
32 file hasn't been used in a long time and has since been replaced
33 with env.d/00basic. Updated sbin/runscript.sh, etc/profile,
34 sbin/rc-help.sh, and src/awk/cachedepends.awk.
35
36 Run `find | xargs` instead of `find -exec`. Much better performance
37 this way, and busybox friendly #59732.
38
39 15 Nov 2004; Roy Marples <uberlord@gentoo.org>:
40
41 Split modules_load into smaller more managable functions in net.lo
42 Added modules_force option to net.lo with a big phat warning in
43 net.example about it potentially breaking networking
44 Added searchdomains_ESSID option to essidnet
45 Stopped the domain setting from putting the same entry in search
46 in config-system and essidnet
47 Removed second warning in net.lo when configuration not set
48 Documented APIPA module in net.example
49 Added kernel checking for vlan - fixes #70829
50 Added kernel checking for bonding, bridging and tuntap
51 Added iproute2 support to the APIPA module
52
53 13 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
54
55 Update the svcdir mounting #69595. Instead of mounting in /mnt
56 and then bind mounting to $svcdir, we mount the ramdisk on $svcidr.
57
58 12 Nov 2004; Roy Marples <uberlord@gentoo.org>:
59
60 Added arping duplicate address detection to net.lo
61 Created Automatic Private IP Addressing (APIPA) module
62
63 Added dependancy checking to ipppd
64 Bonding is now started pre instead of post
65 Fixed iface variable in dhcp modules for vlans
66 Changed get_device to interface_device
67 Changed get_type to interface_type
68 Added vlan configuration options and documented them in net.example
69 Fixed bridge configuration handling
70 Removed _get_vlans from iproute2 and ifconfig as vlan now does it itself
71
72 11 Nov 2004; Roy Marples <uberlord@gentoo.org>:
73
74 Fixed category of rp-pppoe to net-dialup error when requesting ADSL
75 Improved inet6 address deletion and detection in iproute2
76 Improved gateway logic in ifconfig
77 Changed all wireless reporting functions to use iwgetid instead of
78 parsing iwconfig output except for essid
79
80* rc-scripts 1.6.6 (08 Nov 2004)
81
82 08 Nov 2004; Roy Marples <uberlord@gentoo.org>:
83
84 Added options to configure bridge
85 Added bridge configuration example to net.example
86 Added missing required function interface_exists to iptunnel check_depends
87
88 07 Nov 2004; Aron Griffis <agriffis@gentoo.org>:
89
90 Fix shell scripting errors that would result in
91 /sbin/functions.sh: line 166: [: too many arguments.
92
93 05 Nov 2004; Roy Marples <uberlord@gentoo.org>:
94
95 net-scripts/net.modules.d/bridge
96 - fixed destroying a bridge if no ports were added
97 - starts interfaces if they don't exist - fixed bug #65153
98
99 net-scrips/net.modules.d/bonding
100 - starts interfaces if they don't exist
101
102 net-scripts/init.d/net.lo
103 - added net_start() function to start depandant ifaces
104 so that bridge br0 can active tun0 which net.tun0 has to create
105 - added use dependany on wlan incase we're using linux-wlan-ng drivers
106 fixes bug #64978
107 - moved start() to run_start() and stop() to run_stop()
108 created run() and new start()/stop() functions
109 this is so that we have one single entry point to localise variables
110 and to remove any added functions loaded by our modules
111 - removed redundant interface_exists() as it's provided by
112 ifconfig and/or iproute2
113
114 net-scripts/net.modules.d/ifconfig and iproute2
115 - added ifconfig_tunnel and iproute2_tunnel functions
116
117 addred gre/ipip tunnel support via the the tunnel module
118 - fixes bug #50765
119
120 04 Nov 2004; Roy Marples <uberlord@gentoo.org>:
121
122 net-scripts/net.modules.d/pump
123 - fixed setting ntp servers
124
125 net-scripts/net.modules.d/dhcpcd
126 - fixed stopping function
127
128 net-scripts/net.modules.d/bonding
129 - fixed module to actually work with the interface
130
131 net-scripts/init.d/net.lo
132 - we remove all added functions when restarting an interface
133 this relies on the diff command being available
134
135 added isdn support via the new ipppd module - fixes bug #69035
136
137 net-scripts/conf.d/net.example
138 - added sample isdn setup
139
140 net-scripts/conf.d/wireless.example
141 - added better descriptions to the _sleep variables
142
143 Fixed boolean logic error when testing is_net_up in /sbin/runscript.sh
144 - fixed bug #70022
145
146 net.lo - added get_type function to return the type of the interface
147 - eth, ippp, etc
148
149 ipppd, tuntap
150 - start() moved to pre_start() and we now test by type
151 this means you no longer need ifconfig_ippp0=( "isdn" "dhcp" )
152 as ippp0 is always an isdn device
153
154 bridge - fixed stop function and moved start() to pre_start()
155 and automatically start if the variable bridge_${iface} exists
156
157 net.example - fixed up documentation for changed behaviour above
158
159 03 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
160
161 When launching critical services in /sbin/rc, make sure we source
162 the conf.d file (if it exists). Resolves #69956.
163
164 03 Nov 2004; Roy Marples <uberlord@gentoo.org>:
165
166 net-scripts/init.d/net.lo
167 - fixed !module when it's not installed
168 - we can now specify null inet addresses in the config
169 this allows a pure inet6 setup
170 - shutdown lo the same way we bring it up
171
172 net-scripts/net.modules.d/ifconfig
173 - changed IPv6 to inet6 in output of adding inet6 addresses
174 - just output inet6 address removed, not eth0 del foo
175
176 net-scripts/net.modules.d/iproute2
177 - fix deletion of non-link addresses - fixes bug #65417 (again)
178 - handle inet6 addresses like ifconfig - fixes more bug #65417
179
180 net-scripts/conf.d/net.example
181 - noted that inet6 addresses do not create aliases
182 - added examples of assigning inet6 addresses
183
184 net-scripts/net.modules.d/iwconfig
185 - improve error message when card does not support scanning
186
187 net-scripts/conf.d/wireless.example
188 - fixed comment regarding preferred_aps not working with cards that don't
189 support scanning
190
191 02 Nov 2004; Roy Marples <uberlord@gentoo.org>:
192
193 net-scripts/conf.d/net.example
194 - added bridging and tuntap examples
195
196 net-scripts/init.d/net.lo
197 - modprobe ${IFACE} when ${IFACE} does not exist
198
199 net-scripts/net.modules.d/ifconfig
200 - fixed interface existance check
201
202 net-scripts/net.modules.d
203 ifconfig & iproute2
204 - added boolean to interface_exists to report if it exists or not
205 - added checks to see if the interface exists or not when starting
206
207 dhcpcd
208 - removed debug line
209
210 bonding, dhclient, dhcpcd, essidnet, macchanger, pump, udhcpc
211 - added checks to see if the interface exists or not when starting
212
213 tuntap
214 - added checks to see if the interface exists or not when stopping
215
216 01 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
217
218 Dump the error message that hwclock returns since it tends to be
219 quite useful. Modified init.d/clock.
220
221 Fix error in functions.sh [ -z "$@" ] -> [[ -z "$@" ]] #69789.
222
223 Don't create /dev/sndstat link anymore in populate_udev per #69635.
224
225 01 Nov 2004; Roy Marples <uberlord@gentoo.org>:
226
227 net-scripts/init.d/net.lo:
228 - modules specified by interface config now error if they are not loaded
229 - moved interface check to after preup incase user preup loads drivers
230 - modules can be explicitly not used by prefixing them with a !
231 however, they are still available to other modules
232 fixes bugs #68908, #69027
233 - remove check to see if interface exists
234 - modules may setup new interfaces and still require config
235 so we have a new label counter in iface_start
236 - removed the check to see if a class wrapping already exists
237 this fixes the bug where ifconfig and iproute2 are installed, but
238 ifconfig is asked for and the interface is restarted.
239 - added check to see if the configured module is loaded
240 and installed or not in iface_start
241 - add dependancy on isdn4linux - fixes bug #69035
242 - interface_exists moved to iproute and ifconfig
243
244 net-scripts/net.modules.d
245 - Split wireless module into iwconfig and essidnet modules
246 - Added tuntap and bridge modules, fixes bug #55394, #30688
247
248 net-scripts/init.d/iwconfig:
249 - wep mode is now reported
250 - removed post_stop function so we keep existing config
251 - added pre_stop to set the ESSID variable
252 - changed to veinfo/vewarn where appropriate
253 - check if interface exists otherwise abort gracefully
254 - no longer deletes addresses as we now avoid
255 ipv6 local addresses in detecting if interface has an addresses or not
256
257 net-scripts/init.d/ifconfig:
258 - added flag enable/disable function
259 - scope:link inet6 addresses are ignored when testing is_up and
260 del_addresses - fixes bug #65417
261
262 net-scripts/init.d/iproute2:
263 - added flag enable/disable function
264 - scope:link inet6 addresses are ignored when testing is_up and
265 del_addresses - fixes bug #65417
266
267 net-scripts/init.d/macchanger:
268 - fixed detecting whether the change worked or not, fixes bug #68893
269
270 net-scripts/init.d/vlan:
271 - fixed old config problem
272
273 31 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
274
275 Do not delete depscan and envupdate caches on reboot, as this should
276 improve bootup times - works nicely with the '-u' parameters of both.
277 Also move the '-u' parameter test of depscan.sh after the directory
278 exist test, else ${svcdir}/started/, etc do not exist. Modified both
279 /sbin/rc and /sbin/depscan.sh for this.
280
281 Move things around in /sbin/functions.sh to have all functions above.
282
283 Add the 'lo' option to RC_NET_STRICT_CHECKING to resolve bug #29225.
284
285 28 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
286
287 Only add files not managed by udev to device tarball, bug #57110.
288
289 28 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
290
291 Revert pam_console_apply udev check in bootmisc/halt.sh since
292 the bug is with pam_console_apply and not udev/pam.
293
294 Use ${EUID} instead of $(id -u) to help out BSD in runscript.sh.
295
296 Allow users to select ramfs instead of default tmpfs for mounting
297 on /dev with udev #69091.
298
299 Add issue.devfix which would be auto copied to /etc/issue if
300 /sbin/rc detects the user is missing /dev/null or /dev/console.
301 Includes a simple explanation/fix for what's wrong.
302
303 Make sure the clock init script runs after checkroot/modules/localmount
304 so that timestamps are synchronized asap #68133 / #70008.
305
306 Accept '-nc' as a short option to '--nocolor' #64736.
307
308 26 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
309
310 Don't use -A with fsck to respect the fs_passno since it'll try
311 to fsck all filesystems, not just the ones specified. Instead,
312 awk /etc/fstab to review the passno field in checkroot #68822.
313
314 Add support for 'gentoo=forcefsck' boot option in checkroot.
315
316 Make sure we run devfsd in /sbin/rc even when /dev has been
317 automounted by the kernel #68795.
318
319 Don't generate the device tarball in halt.sh with livecds #68469.
320
321 25 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
322
323 net-scripts/net.modules.d/ifconfig:
324 - Simplify ifconfig_is_up()
325 - Fix ifconfig_get_aliases_rev() to actually work... you can't
326 specify an interface name to ifconfig if you want to see the
327 aliases.
328 - Workaround a couple ifconfig bugs dealing with aliases
329 - Correct a return status in ifconfig_interface_del_addresses()
330 - ifconfig_iface_stop() is bool, not void; fix the comments
331
332 net-scripts/net.modules.d/iproute2:
333 - iproute2_iface_stop() is bool, not void. Fix the code so it
334 returns meaningful values
335
336 net-scripts/init.d/net.lo:
337 - Fix preferred (ifconfig/dhcpcd) module loading so it doesn't
338 barf when a preferred module is either (1) missing from
339 net.modules.d or (2) not available due to missing dependencies
340 - When loading all modules in order to stop an interface, only use
341 the first available to satisfy each class wrapper
342
343 24 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
344
345 Include livecd patch that was applied to baselayout-1.9.4-r6
346 to use agetty instead of mingetty
347
348 24 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
349
350 Mount tmpfs instead of ramfs on /dev when using udev systems.
351 The problem with ramfs is that it has no size limitations so
352 one could easily take down their machine by accident #68653.
353
354* rc-scripts 1.6.3 (23 Oct 2004)
355
356 22 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
357
358 Add support for user_eth0 in the adsl module and in net.example.
359 This means that most users won't need to edit pppoe.conf at all
360
361 21 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
362
363 Remove old etc/conf.d/net and try to clarify instructions in
364 net-scripts/conf.d/net.example. Add example for ADSL
365
366 21 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
367
368 Merge all of the UML checks into one function, is_uml_sys(),
369 which is now in functions.sh.
370
371 18 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
372
373 Add v-e-commands (veinfo, vbegin, etc) to sbin/functions.sh that
374 depend on RC_VERBOSE which defaults to no. Add --verbose to args
375 understood by runscript.sh.
376
377 In net.lo, use veinfo and friends when loading modules since this
378 information is confusing to users.
379
380 In net.lo, always load global "modules" setting in following
381 "modules_iface" since this is a little easier for users to
382 understand.
383
384 In net.lo, use eindent for output of pre/post scripts
385
386 18 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
387
388 Add shfs to our list of net filesystems #61452. Also add afs/nfs4.
389
390 Add a '-u' parameter to depscan.sh to allow for updates only when
391 the config files have changed. With /sbin/rc using this, we speed
392 up bootup by only regenerating the cache when need be #67976. Also
393 add a '-u' parameter to env-update.sh for same reasons.
394
395 Don't run depscan.sh in rc-update anymore since the cache files don't
396 depend on runlevels (which is all that rc-update modifies).
397
398 Add unicode support to keymaps/consolefont #32111 and UML support #29707.
399
400 Add checks to many filesystem operations in the eventuality that the
401 filesystems are mounted read only.
402
403 16 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
404
405 Update the default fstab /dev/shm mount to include the nodev, nosuid,
406 and noexec mount flags. No reason for the filesystem to have those.
407
408 Cleaned up the clock init script. Moved the clock options out of
409 rc.conf and into its own conf.d/clock file. Added support for the
410 weird Alpha consoles SRM/ARC since they need special config options.
411 Also made the syncing of system clock to hardware clock at shutdown
412 optional (with the default being off) #15834. Don't try to set the
413 clock if running inside a coLinux environment #52870.
414
415 Update default PATH ordering to try to follow default behavior in
416 other distro's and because it's logical that /usr/local should
417 override /usr which should override /. Fixes #12531.
418
419 Move devfs stuff out of baselayout and into the devfsd package.
420
421 Don't run /sbin/pam_console_apply -r if using udev on /dev #50315.
422
423 14 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
424
425 Fix rc-status to work with new COLS code.
426
427 14 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
428
429 Allow users to mount ramfs/tmpfs/ramdisk as their svcdir and
430 stop assuming ramfs==ramdisk #64079.
431
432 13 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
433
434 Rework the code for managing /dev to make it more flexible for
435 users. Some don't want to use devfs/udev but rather just create
436 their own nodes. Handles some issues with #44906 / #67276.
437
438 Move the utmp clearing code out of bootmisc and into /sbin/rc.
439 The utmp log must be cleared while in the initial boot level
440 (meaning inside /sbin/rc) because as soon as rc exists, init
441 writes a 'boot' record (`who -b`) which would normally be lost
442 when the bootmisc init.d script is run #61727.
443
444 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
445
446 Cosmetic fixes for starting loopback interface
447
448 SpanKY doesn't like the dots... disable them by default, but you
449 can set RC_DOT_PATTERN=' .' in /etc/conf.d/rc to get them back
450
451* rc-scripts 1.6.2 (13 Oct 2004)
452
453 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
454
455 Install net.modules.d to /lib/rcscripts instead of /etc so we
456 don't have to deal with CONFIG_PROTECT
457
458 Fix diff code in modules_load so it can identify which functions
459 have been modified
460
461 Fix fallback mechanism in iface_start so that it works correctly
462 and doesn't report a bogus error message when trying the fallback
463
464 Get rid of need_begin trickery in iface_stop
465
466 Simplify eend processing in dhcp modules
467
468 Implement eindent, eoutdent, esetdent in functions.sh and adjust
469 net-scripts to use them.
470
471 Re-write einfo, ewarn, eerror, ebegin, eend, ewend to use
472 RC_INDENTATION and to work better on serial terminals
473
474 Remove conf.d/net.ppp0 since that is provided by net-dialup/ppp
475
476 12 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
477
478 Fix ipaddr_fallback in net-scripts/conf.d/net.example
479
480 09 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
481
482 Remove init.d/net.eth0 net.lo and net.ppp0. The first two are
483 provided now by net-scripts and net.ppp0 is shipped in
484 net-dialup/ppp
485
486 Create NET_FS_LIST and is_net_fs in functions.sh and use them in
487 checkroot, localmount, netmount, net.example, and net.lo
488
489 09 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
490
491 If the hostname has already been set via the kernel/dhcp, don't
492 force it to 'localhost'. Used in netboot/terminal setups #38172.
493
494 Add domainname to default boot runlevel list #47041.
495
496 08 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
497
498 Make sure that when we try to mount /sys, we do so with -n (tigger).
499
500 Add some examples for nfs to sysctl.conf #66575.
501
502 06 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
503
504 Update to net-scripts 1.0.2 from Roy
505 ------------------------------------
506 - wireless module: replaced preferred_only var with
507 associate_order this makes more sense now as we have changed the
508 possible values
509 - wireless module: added patch from Daniel Zappala we should call
510 wireless_get_essid everywhere now
511 - wireless module: don't declare ESSID local in
512 wireless_configure(). This allows ESSID to be tested in the
513 user defined postup() function
514 - wireless module: test type != "NOT READY!" instead of testing =
515 IEEE. this resolves problems with intel and ra-tech drivers
516 - net.lo start() now errors when the interface does not exist
517 - dhcpcd, dhclient, udhcpc and pump now expose peer_* vars this
518 enables wireless to map them from peer_dns_ESSID
519 - config-system helper now loads wireless module to remap
520 variables from ESSID this allows udhcpc and dhclient to use
521 remapped wireless vars
522 - fixed dhcpcd and pump modules using peer_* vars
523 - wireless aborts after 5 seconds if it cannot report a valid
524 ESSID this fixes a potential infinite loop problem
525 - wireless_setup_iface() renamed to wireless_map_essid_vars() this
526 avoids confusion about what the function actually does
527
528 06 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
529
530 Change the default net.ipv4.conf.default.rp_filter setting to 1
531 in sysctl.conf since it shouldn't be harmful in anyway. Redhat
532 does the same.
533
534 05 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
535
536 Get rid of getcols() in sbin/functions.sh. Use COLUMNS when
537 possible and otherwise clean up the COLS code. Fix the "emerge
538 depend" detection code to use RC_ENDCOL="no"
539
540 05 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
541
542 Changed behavior of the domainname init.d script. It will now
543 override any settings obtained via dhcp/whatever. See #48277.
544
545 Updated bootmisc to dump the output of `dmesg` to /var/log/dmesg.
546 This way users have an 'after-boot' log of their dmesg saved
547 somewhere useful #55421.
548
549 Added the 'eend' back to depscan.sh since the script starts with a
550 call to 'ebegin' #59694.
551
552 Add selinux update from Chris PeBenito for src/runscript.c #64019.
553
554 Add more quoting to rc-help.sh to fix some non-critical errors.
555 Make rc-help.sh respect the value of RC_NOCOLOR. Allow RC_NOCOLOR
556 in functions.sh to be set via the environment.
557
558 Flesh out the default sysctl.conf with comments and more examples
559 since our previous one was pretty sparse #59993.
560
561 Change calls to `uniq` to `sort -u` in checkroot/halt.sh. This way
562 we only require sort in / and not both #36453.
563
564 04 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
565
566 More (I mean a LOT more) services. This takes care of #44458,
567 #52881 #55939 #58997 #66166 #66297. Gleaned many from the IANA
568 list/Fedora/FreeBSD/Debian.
569
570 Change the test for /proc/cmdline from -e to -r. On grsecurity
571 based systems for example, the file may exist, but not be readable
572 by non-root users (patch by Ned Ludd).
573
574 03 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
575
576 Add support for NFSv4 from #25106 to the netmount script. Don't
577 try to fsck / if the root is a remote filesystem (like NFS) #36624.
578
579 Update the fs_passno values in the default fstab to match the
580 settings suggested by the manpage #37314. Make checkroot respect
581 a fs_passno setting of 0 when dealing with / #39212. Change
582 default / filesystem type to ext3 instead of xfs #42670.
583
584 Re-order the arguments to mount to match POSIX requirements #66225.
585
586 Don't pipe swapon in localmount to /dev/null and ignore return
587 codes anymore. A swapon that works shows no output #39834.
588
589 02 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
590
591 Break up the COL/COLOR code properly this time. Not all serial
592 consoles can handle adjusting to the end of the line, so let's not
593 bother running stty at all anymore. This should fix up #32453.
594
595 30 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
596
597 Disable cryptfs by default in the conf.d file. Also cleanup
598 the output generated in localmount/checkfs/halt.sh for dm-crypt.
599 Add an extra check so that cryptfs is only run when the conf.d
600 file exists as well as /bin/cryptsetup.
601
602 29 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
603
604 Let glibc install nscd since different versions of glibc will
605 need to be handled differently. See #43076 by Rui Malheiro.
606
607 29 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
608
609 Prefer ~/.dir_colors over /etc/DIR_COLORS when it exists #64489
610
611 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
612
613 Clear the screen in .bash_logout #32330
614
615* rc-scripts 1.6.1 (27 Sep 2004)
616
617 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
618
619 Update dm-crypt to work with multi-line configuration files.
620 Also don't set status in a subshell; it was being lost before.
621
622 23 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
623
624 Rework the logic behind the $COLS code. It should not depend
625 on whether color is enabled. Also add a check for negative
626 values (like when using a serial console).
627
628* rc-scripts 1.6.0 (15 Sep 2004)
629
630 15 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
631
632 Fix bug 64034: simplify netmount script's stop function so that
633 mountpoints containing spaces work correctly
634
635 Update tarball.sh to use net-scripts
636
637 14 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
638
639 Commit dm-crypt enablement patch from Tigger (Rob Holland) in
640 bug 43146
641
642* rc-scripts 1.5.3 (18 Aug 2004)
643
644 18 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
645
646 Fix bug 60719 (request for better error messages from runscript)
647 by allowing errors to show on the screen when they're encountered
648 in wrap_rcscript
649
650 Apply Spock's bootsplash patch from bug 45784. This moves most of
651 the splash functionality out of baselayout.
652
653 13 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
654
655 Don't export PS1. Continuation of bug 26951, comments 60-62.
656
657* rc-scripts 1.5.2 (02 Aug 2004)
658
659 02 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
660
661 Related to bug 38955, don't set INPUTRC. Instead patch bash so
662 that it looks for /etc/inputrc automatically if ~/.inputrc is
663 missing. This is better than using INPUTRC since that will
664 override even after the user creates ~/.inputrc.
665
666 Fix bug 54275: Don't set INFODIR. The correct variable used by
667 texinfo is INFOPATH, which is already set in 00basic. Setting
668 INFODIR is useless, and breaks a NetBSD cross compile from Gentoo
669
670 01 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
671
672 Fix bug 58805: net.eth0 should use bridge so that bridge
673 interfaces are configured prior to net.br0 running
674
675 Fix bug 56856: Get rid of net.rej and integrate missing stuff to
676 conf.d/net
677
678 Apply half of spock's patch in bug 45784: Check for
679 conf.d/bootsplash instead of conf.d/bootsplash.conf
680
681 Fix bug 51351: Quote parsed output of /proc/filesystems to handle
682 octal sequences in mountpoint such as encoded spaces (\040)
683
684 Fix bug 46680: Add cifs support to localmount and netmount.
685 Thanks to Ronald Moesbergen for the patches
686
687 21 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
688
689 Fix bug 26952: Use /etc/bash/bashrc to setup PS1, testing $- to
690 determine if shell is interactive. The new system-wide bashrc is
691 installed by bash-2.05b-r10
692
693 19 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
694
695 Fix bug 38743: strip leading and trailing spaces from variable
696 values in genenviron.awk. Thanks to Marius Mauch for the patch.
697
698 09 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
699
700 Fix bug 55576: swap words "start" and "stop" in runscript.sh error
701 message
702
703* rc-scripts 1.5.1 (28 Jun 2004)
704
705 28 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
706
707 Fix dhcp in iface_start_ifconfig: It was re-using the variable
708 ${i} which would result in the following error:
709 /sbin/runscript.sh: line 441: ((: 16.141.88.153: syntax error
710 in expression (error token is ".141.88.153")
711
712 Use vlan_IFACE instead of iface_IFACE_vlans in net.eth0 for more
713 consistent vlan configuration. Thanks to robbat2 in bug 55394
714 (not fully resolved)
715
716 Add example for checking if root filesystem is NFS-mounted via
717 predown function in conf.d/net for bug 53104. This might be
718 better integrated at some point into net.eth0
719
720* rc-scripts 1.5.0 (26 Jun 2004)
721
722 26 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
723
724 Fix bug 47659: support iproute2-style configuration. Thanks to
725 Dean Bailey for some fantastic patches, including documentation
726 for conf.d/net. This is a pretty huge re-write of net.eth0
727
728 Fix bug 34607: provide examples for in conf.d/net for preup,
729 postup, predown, postdown functions. Also pay attention to return
730 value from predown function (previously ignored)
731
732 15 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
733
734 Fix bug 25975: support adsl in net.eth0. Thanks to Patrick McLean
735 for the initial pass at the code.
736
737 Fix bug 34140: add --servicelist option to rc-status. Thanks to
738 Eldad Zack for the patch.
739
740 Fix bug 37418: fix order of LVM and RAID in checkfs. Thanks to
741 Raimondo Giammanco for the patch.
742
743* rc-scripts 1.4.16 (06 Jun 2004)
744
745 06 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
746
747 Only call generate-modprobe.conf with --assume-kernel if
748 modules-update was called with --assume-kernel. This means that
749 only catalyst has the dependency on module-init-tools, not
750 everybody with the newer baselayout
751
752* rc-scripts 1.4.15 (21 May 2004)
753
754 21 May 2004; Aron Grifis <agriffis@gentoo.org>:
755
756 Fix bug 51570: typo on line 161 of /sbin/livecd-functions.sh
757
758 Fix bug 51626: wrong variable declaration at top of
759 get_bootparam() in /sbin/functions.sh
760
761* rc-scripts 1.4.14 (17 May 2004)
762
763 17 May 2004; Aron Griffis <agriffis@gentoo.org>:
764
765 Bump version to 1.4.14 to push out gmsoft's fix for hppa console
766 on ttyB0
767
768* rc-scripts 1.4.13 (15 May 2004)
769
770 15 May 2004; Aron Griffis <agriffis@gentoo.org>:
771
772 Bump version to 1.4.13 to push out Gustavo's livecd serial console
773 fixes for sparc and hppa.
774
775* rc-scripts 1.4.12 (07 May 2004)
776
777 10 May 2004; Aron Griffis <agriffis@gentoo.org>:
778
779 Bump version to 1.4.12 to release these critical bug fixes
780
781 Fix bug 50434: The new version of start-stop-daemon changes
782 directory to / by default unless --chdir is specified. Revert
783 this behavior to maintain working directory. This fixes openvpn
784 startup (probably among other things). Thanks to Sven Wegener for
785 the patch.
786
787 Fix bug 50448: Four days ago I changed bash loops to use the wrong
788 conditional syntax in net.eth0. Thanks to Sven Wegener for
789 pointing out the problem and providing a patch.
790
791* rc-scripts 1.4.11 (07 May 2004)
792
793 07 May 2004; Aron Griffis <agriffis@gentoo.org>:
794
795 Fix bug 20597: Skip RCS files when updating modules
796
797 Fix bug 49926: Add a --assume-kernel flag to modules-update. This
798 requires a companion patch in module-init-tools-3.0-r2 to handle
799 the same flag in generate-modprobe.conf; this dependency won't be
800 handled in the baselayout ebuild since it only affects livecd
801 building.
802
803 06 May 2004; Aron Griffis <agriffis@gentoo.org>:
804
805 In net.eth0, fix many instances of loops like "for ((i = 0; i <
806 100; i = i + 1))". The problem here is that the middle comparison
807 is being interpreted as a bash conditional, which means that it's
808 doing string comparison by default. It needs to be "i -lt 100"
809
810 Fix bug 34827: net.eth0 breaks when localized because the ifconfig
811 output changes. Wrap ifconfig in a function that overrides
812 LC_ALL=C
813
814 Fix bug 48305: Provide a new network configuration variable
815 ifconfig_fallback_eth0 which allows one to specify a fallback
816 configuration in case DHCP fails.
817
818 Fix bug 50246: Give root an invalid password ("*" in /etc/shadow)
819 in the default baselayout. This prevents the first reboot after
820 installation from having a blank password.
821
822 05 May 2004; Aron Griffis <agriffis@gentoo.org>:
823
824 Fix bug 48595: Make sure $(id -u) is zero (root user) when running
825 init scripts to avoid a lot of error messages.
826
827 Replace many lines of awk with two lines of grep in
828 init.d/localmount
829
830 Fix bug 44316: Use 0644 instead of 0640 for resolv.conf in net.ppp0
831
832 03 May 2004; Aron Griffis <agriffis@gentoo.org>:
833
834 Update to version 1.10.20 of Debian's start-stop-daemon (contained
835 in dpkg at http://packages.debian.org/testing/base/dpkg). This
836 fixes bug 22686 (start-stop-daemon in baselayout doesn't allow
837 altered nicelevel).
838
839* rc-scripts 1.4.10 (25 Apr 2004)
840
841 25 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
842
843 Fix typos in sbin/rc: "try try mount" and "mount ... & >/dev/null"
844 Also removed the errstr double-checking since the need for that is
845 alleviated by these typo fixes.
846
847 23 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
848
849 Fix bug 48629 (/sbin/rc fixups for udev) with patch from GregKH
850
851 Fix bug 40987 (gentoo should be able to boot with an empty /dev)
852 with patch from Spanky. The patch avoids redirection to /dev/null
853 when it doesn't exist; this was breaking /sbin/rc.
854
855* rc-scripts 1.4.9 (15 Apr 2004)
856
857 15 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
858
859 Fix bug 47111 (severe depcache problems) with tons of help from
860 dswhite42 and the rest of the crew in that bug. Thanks guys!
861
862* rc-scripts 1.4.8 (14 Apr 2004)
863
864 14 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
865
866 Fix bug 47623 (error removing inet6 addresses) with patch provided
867 by Vlad Yasevich.
868
869* rc-scripts 1.4.7 (12 Apr 2004)
870
871 12 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
872
873 Fix bug 47218 (net.eth0 broken for vlans) with patch provided by
874 Andy Dustman. Fix bug 47250 (depscan.sh fails to create
875 /var/lib/init.d/* directories) with patch from Terje Bergström.
876
877* rc-scripts 1.4.6 (08 Apr 2004)
878
879 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
880
881 Update patch from Gustavoz; -ln /bin/bash should have been -nl /bin/bash
882
883* rc-scripts 1.4.5 (08 Apr 2004)
884
885 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
886
887 Patch init.d/checkroot to list / (root) only once in mtab; see bug 38360.
888 Patch from Gustavoz to livecd-functions.sh to run bash instead of login on
889 serial consoles, necessary due to scrambled root passwords.
890
891* rc-scripts 1.4.4 (07 Apr 2004)
892
893 07 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
894
895 Patch from Gustavoz for Sparc console: Fetch LIVECD_CONSOLE from dmesg
896 output. Also support 4800 baud correctly.
897
898 16 Mar 2004; Aron Griffis <agriffis@gentoo.org>:
899
900 The changes in this commit pertain primarily to
901 http://bugs.gentoo.org/show_bug.cgi?id=19695
902 http://bugs.gentoo.org/show_bug.cgi?id=35736
903
904 Specify routes as an array per interface, for example:
905 routes_eth0=(
906 "-net 10.1.0.0 netmask 255.255.0.0 gw 10.0.0.5"
907 "-net 10.2.0.0 netmask 255.255.0.0 gw 10.0.0.6"
908 "-host 10.3.0.1 dev eth0"
909 )
910
911 You can optionally use the gateway variable or just put the default route
912 in the routes variable. The following two are REDUNDANT:
913
914 routes_eth0=( "default gw 10.0.0.5" )
915 gateway="eth0/10.0.0.5"
916
917 Old configuration variables in /etc/conf.d/net are fully supported and
918 used transparently if ifconfig_eth0 is missing. In other words, this new
919 script is fully backward-compatible. However you can get rid of
920 iface_eth0, alias_eth0, broadcast_eth0 and netmask_eth0 if you want by
921 using the new syntax:
922
923 ifconfig_eth0=(
924 "10.0.0.6 broadcast 10.0.255.255 netmask 255.255.0.0"
925 "192.168.1.1 netmask 255.255.255.0"
926 "123.456.789.1"
927 )
928
929 Full backward compatibility so no danger to screwing up users relying on
930 existing /etc/conf.d/net setup
931
932 NET_DEBUG can be set in the environment for copious debugging output
933
934 Deprecate [ ] in favor of [[ ]] which has fewer quoting issues and
935 better functionality (and is even slightly faster)
936
937 Properly localize all variables, including variables returned by
938 setup_vars
939
940 Allow full options for every ifconfig command, both base address and
941 aliases via ifconfig_eth0, replacing the convoluted and less-functional
942 iface_eth0, alias_eth0, broadcast_eth0, netmask_eth0
943
944 Provide full support for static routes via routes_eth0
945
946 Fix potential quoting problems in setup_vars by using better eval syntax
947 instead of eval echo
948
949 Display IP addresses while configuring, both DHCP-retrieved and
950 statically set addresses
951
952 Collapse redundant caching of $? since eend returns $? again
953
954 Report when keeping kernel configuration for an interface along with IP
955 address gleaned
956
957 Don't reset the default gateway if it is already set correctly
958
959 Don't bind default gateway to particular interface when /sbin/route is
960 called so that it can survive if there is more than one interface on the
961 required subnet. (Old behavior can be obtained by setting
962 routes_eth0="default gw 1.2.3.4 dev eth0" if you really want it)
963
964 Don't bomb if default gateway can't be set since that doesn't
965 necessarily mean that the interface configuration is invalid.
966 (Old behavior was completely broken, but commented section
967 demonstrates how to do it right if necessary)
968
969 iface_stop no longer relies on configuration in /etc/conf.d/net AT ALL.
970 This is very good because it means you can put new configuration in
971 /etc/conf.d/net, then restart the interface and the old configuration will
972 be properly shut down.
973
974 iface_stop reports when it is releasing the DHCP lease
975
976* rc-scripts 1.4.3.13p1 (26 Feb 2004)
4 977
5 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 978 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
6 979
7 Remove /etc/DIR_COLORS, as coreutils provides it now. 980 Remove /etc/DIR_COLORS, as coreutils provides it now.
981
982 Add RC_DEVICE_TARBALL to /etc/conf.d/rc to control use of device tarball.
983 Also modified /sbin/rc and /etc/init.d/halt.sh for this.
984
985 Start udevd if present.
986
987 Small fix to sbin/rc-services.sh related to mtime checking and 'net'
988 virtual service - it had no mtime generated, so check_mtime() failed
989 for it ...
8 990
9 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 991 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
10 992
11 Update to enable checking of mtimes on rc-scripts, and auto running 993 Update to enable checking of mtimes on rc-scripts, and auto running
12 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO 994 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO
1395 2377
1396 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified 2378 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified
1397 /etc/env.d/00basic for this. 2379 /etc/env.d/00basic for this.
1398 2380
1399 Add some new daemon stop and pid detection stuff to /sbin/functions.sh. 2381 Add some new daemon stop and pid detection stuff to /sbin/functions.sh.
1400 Nothing official, but I spent enouth time on it not to want to loose it :) 2382 Nothing official, but I spent enough time on it not to want to loose it :)
1401 2383
1402 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs 2384 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs
1403 to give output to stderr. This was caused by a call to "stty", which when 2385 to give output to stderr. This was caused by a call to "stty", which when
1404 run without a attatched terminal, have this effect. Basically just pipe 2386 run without a attatched terminal, have this effect. Basically just pipe
1405 stderr to /dev/null. 2387 stderr to /dev/null.

Legend:
Removed from v.1.324  
changed lines
  Added in v.1.500

  ViewVC Help
Powered by ViewVC 1.1.20