/[gentoo-src]/rc-scripts/ChangeLog
Gentoo

Diff of /rc-scripts/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.324 Revision 1.509
1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts 1# ChangeLog for Gentoo System Intialization ("rc") scripts
2# Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL 2# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPLv2
3# Written by Daniel Robbins (drobbins@gentoo.org) 3
4 24 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
5
6 Allow users to specify charset option to dumpkeys when using unicode
7 in conf.d/keymaps #72225. Also move all the init.d/keymap specific
8 options out of rc.conf and into conf.d/keymaps and add some config
9 checks to init.d/keymaps like the clock/hostname init.d scripts.
10
11 24 Nov 2004; Roy Marples <uberlord@gentoo.org>:
12
13 Ensure all net-scripts modules depend on interface_variable function
14 where applicable
15
16 23 Nov 2004; Roy Marples <uberlord@gentoo.org>:
17
18 iproute2 does not need to create dummy interfaces for aliases
19 unlike ifconfig so we no longer do this
20 We now bring down all aliases and addresses properly
21 Split off some functions from net.lo into helpers.d/functions
22 so that our DHCP helper scripts can use them too :)
23 Deprecated interface specific setup in favour of a generic config
24 macchanger brings interface up now - fixes #71929
25 DHCP over VLAN now works - fixes #71860
26 Disabled modified function checking as it's far too expensive on CPU
27 and still isn't 100% reliable
28 When specifing a module that isn't emerged, you now get an error
29 telling you what to emerge
30 Removed -p option from the diff call used for function removal
31 Removed rp_filter setting - fixes first part of bug #71971
32 Added sysctl.conf settings relating to rp_filter to sysctl.conf
33 - fixes last part of bug #71971
34 Fixed pump exporing ntp servers
35 implemented MODULES_DIR so we can change directory we load from on the fly
36 fixed variables for vlans in most modules
37
38 19 Nov 2004; Aron Grffis <agriffis@gentoo.org>:
39
40 Remove crap "ll" and "d" aliases from skel .bashrc
41
42 19 Nov 2004; Roy Marples <uberlord@gentoo.org>:
43
44 tests for hostname (none) when sending hostname via dhcpcd, udhpc or pump
45 udhcpc now does correct signal handling so we can release leases and
46 terminate cleanly
47 Improved pump process detection
48 Rewrote udhcpc helper scripts around udhcpc and wrapped dhclient to udhcpc
49 scripts. This makes things much saner as udhcpc is much saner - also fixed
50 essidnet and ipv6 local link for them.
51 removed iproute2 udhcpc reliance on the "bc" command
52
53 17 Nov 2004; Roy Marples <uberlord@gentoo.org>:
54
55 Fixed invalid variable handling in bonding and vlan - bug #71419
56 apipa now brings the interface up before testing if address exists
57 Updated bonding documentation - bug #71419
58 Fixed iproute2 adding addresses for vlans - bug #71419
59 ifconfig handle inet6 routing automatically - bug #33310
60 ifconfig - fixed old gateway + gateway in routes conflict
61 iproute2 cleaned up some functions
62
63 16 Nov 2004; Roy Marples <uberlord@gentoo.org>:
64
65 We no longer default a fallback to APIPA when no config is given
66 net.example fleshed out a bit more for dhcpcd - fixes #60845
67 Improved forced module handling a touch
68 modules_sort and modules_check_user in net.lo buffer _provides,
69 _before and _after in arrays to avoid shelling out
70
71 15 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
72
73 Add a check to clock init.d to make sure users dont try to set
74 config their clock in rc.conf anymore.
75
76 Redo hostname/domainname scripts to use files in /etc/conf.d/
77 instead of creating files in /etc/. Allows for controlling things
78 like the behavior of setting the 'domain' in resolv.conf since users
79 may not always understand exactly what's going on.
80
81 Stop referring to conf.d/basic as a global rc config option. That
82 file hasn't been used in a long time and has since been replaced
83 with env.d/00basic. Updated sbin/runscript.sh, etc/profile,
84 sbin/rc-help.sh, and src/awk/cachedepends.awk.
85
86 Run `find | xargs` instead of `find -exec`. Much better performance
87 this way, and busybox friendly #59732.
88
89 15 Nov 2004; Roy Marples <uberlord@gentoo.org>:
90
91 Split modules_load into smaller more managable functions in net.lo
92 Added modules_force option to net.lo with a big phat warning in
93 net.example about it potentially breaking networking
94 Added searchdomains_ESSID option to essidnet
95 Stopped the domain setting from putting the same entry in search
96 in config-system and essidnet
97 Removed second warning in net.lo when configuration not set
98 Documented APIPA module in net.example
99 Added kernel checking for vlan - fixes #70829
100 Added kernel checking for bonding, bridging and tuntap
101 Added iproute2 support to the APIPA module
102
103 13 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
104
105 Update the svcdir mounting #69595. Instead of mounting in /mnt
106 and then bind mounting to $svcdir, we mount the ramdisk on $svcidr.
107
108 12 Nov 2004; Roy Marples <uberlord@gentoo.org>:
109
110 Added arping duplicate address detection to net.lo
111 Created Automatic Private IP Addressing (APIPA) module
112
113 Added dependancy checking to ipppd
114 Bonding is now started pre instead of post
115 Fixed iface variable in dhcp modules for vlans
116 Changed get_device to interface_device
117 Changed get_type to interface_type
118 Added vlan configuration options and documented them in net.example
119 Fixed bridge configuration handling
120 Removed _get_vlans from iproute2 and ifconfig as vlan now does it itself
121
122 11 Nov 2004; Roy Marples <uberlord@gentoo.org>:
123
124 Fixed category of rp-pppoe to net-dialup error when requesting ADSL
125 Improved inet6 address deletion and detection in iproute2
126 Improved gateway logic in ifconfig
127 Changed all wireless reporting functions to use iwgetid instead of
128 parsing iwconfig output except for essid
129
130* rc-scripts 1.6.6 (08 Nov 2004)
131
132 08 Nov 2004; Roy Marples <uberlord@gentoo.org>:
133
134 Added options to configure bridge
135 Added bridge configuration example to net.example
136 Added missing required function interface_exists to iptunnel check_depends
137
138 07 Nov 2004; Aron Griffis <agriffis@gentoo.org>:
139
140 Fix shell scripting errors that would result in
141 /sbin/functions.sh: line 166: [: too many arguments.
142
143 05 Nov 2004; Roy Marples <uberlord@gentoo.org>:
144
145 net-scripts/net.modules.d/bridge
146 - fixed destroying a bridge if no ports were added
147 - starts interfaces if they don't exist - fixed bug #65153
148
149 net-scrips/net.modules.d/bonding
150 - starts interfaces if they don't exist
151
152 net-scripts/init.d/net.lo
153 - added net_start() function to start depandant ifaces
154 so that bridge br0 can active tun0 which net.tun0 has to create
155 - added use dependany on wlan incase we're using linux-wlan-ng drivers
156 fixes bug #64978
157 - moved start() to run_start() and stop() to run_stop()
158 created run() and new start()/stop() functions
159 this is so that we have one single entry point to localise variables
160 and to remove any added functions loaded by our modules
161 - removed redundant interface_exists() as it's provided by
162 ifconfig and/or iproute2
163
164 net-scripts/net.modules.d/ifconfig and iproute2
165 - added ifconfig_tunnel and iproute2_tunnel functions
166
167 addred gre/ipip tunnel support via the the tunnel module
168 - fixes bug #50765
169
170 04 Nov 2004; Roy Marples <uberlord@gentoo.org>:
171
172 net-scripts/net.modules.d/pump
173 - fixed setting ntp servers
174
175 net-scripts/net.modules.d/dhcpcd
176 - fixed stopping function
177
178 net-scripts/net.modules.d/bonding
179 - fixed module to actually work with the interface
180
181 net-scripts/init.d/net.lo
182 - we remove all added functions when restarting an interface
183 this relies on the diff command being available
184
185 added isdn support via the new ipppd module - fixes bug #69035
186
187 net-scripts/conf.d/net.example
188 - added sample isdn setup
189
190 net-scripts/conf.d/wireless.example
191 - added better descriptions to the _sleep variables
192
193 Fixed boolean logic error when testing is_net_up in /sbin/runscript.sh
194 - fixed bug #70022
195
196 net.lo - added get_type function to return the type of the interface
197 - eth, ippp, etc
198
199 ipppd, tuntap
200 - start() moved to pre_start() and we now test by type
201 this means you no longer need ifconfig_ippp0=( "isdn" "dhcp" )
202 as ippp0 is always an isdn device
203
204 bridge - fixed stop function and moved start() to pre_start()
205 and automatically start if the variable bridge_${iface} exists
206
207 net.example - fixed up documentation for changed behaviour above
208
209 03 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
210
211 When launching critical services in /sbin/rc, make sure we source
212 the conf.d file (if it exists). Resolves #69956.
213
214 03 Nov 2004; Roy Marples <uberlord@gentoo.org>:
215
216 net-scripts/init.d/net.lo
217 - fixed !module when it's not installed
218 - we can now specify null inet addresses in the config
219 this allows a pure inet6 setup
220 - shutdown lo the same way we bring it up
221
222 net-scripts/net.modules.d/ifconfig
223 - changed IPv6 to inet6 in output of adding inet6 addresses
224 - just output inet6 address removed, not eth0 del foo
225
226 net-scripts/net.modules.d/iproute2
227 - fix deletion of non-link addresses - fixes bug #65417 (again)
228 - handle inet6 addresses like ifconfig - fixes more bug #65417
229
230 net-scripts/conf.d/net.example
231 - noted that inet6 addresses do not create aliases
232 - added examples of assigning inet6 addresses
233
234 net-scripts/net.modules.d/iwconfig
235 - improve error message when card does not support scanning
236
237 net-scripts/conf.d/wireless.example
238 - fixed comment regarding preferred_aps not working with cards that don't
239 support scanning
240
241 02 Nov 2004; Roy Marples <uberlord@gentoo.org>:
242
243 net-scripts/conf.d/net.example
244 - added bridging and tuntap examples
245
246 net-scripts/init.d/net.lo
247 - modprobe ${IFACE} when ${IFACE} does not exist
248
249 net-scripts/net.modules.d/ifconfig
250 - fixed interface existance check
251
252 net-scripts/net.modules.d
253 ifconfig & iproute2
254 - added boolean to interface_exists to report if it exists or not
255 - added checks to see if the interface exists or not when starting
256
257 dhcpcd
258 - removed debug line
259
260 bonding, dhclient, dhcpcd, essidnet, macchanger, pump, udhcpc
261 - added checks to see if the interface exists or not when starting
262
263 tuntap
264 - added checks to see if the interface exists or not when stopping
265
266 01 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
267
268 Dump the error message that hwclock returns since it tends to be
269 quite useful. Modified init.d/clock.
270
271 Fix error in functions.sh [ -z "$@" ] -> [[ -z "$@" ]] #69789.
272
273 Don't create /dev/sndstat link anymore in populate_udev per #69635.
274
275 01 Nov 2004; Roy Marples <uberlord@gentoo.org>:
276
277 net-scripts/init.d/net.lo:
278 - modules specified by interface config now error if they are not loaded
279 - moved interface check to after preup incase user preup loads drivers
280 - modules can be explicitly not used by prefixing them with a !
281 however, they are still available to other modules
282 fixes bugs #68908, #69027
283 - remove check to see if interface exists
284 - modules may setup new interfaces and still require config
285 so we have a new label counter in iface_start
286 - removed the check to see if a class wrapping already exists
287 this fixes the bug where ifconfig and iproute2 are installed, but
288 ifconfig is asked for and the interface is restarted.
289 - added check to see if the configured module is loaded
290 and installed or not in iface_start
291 - add dependancy on isdn4linux - fixes bug #69035
292 - interface_exists moved to iproute and ifconfig
293
294 net-scripts/net.modules.d
295 - Split wireless module into iwconfig and essidnet modules
296 - Added tuntap and bridge modules, fixes bug #55394, #30688
297
298 net-scripts/init.d/iwconfig:
299 - wep mode is now reported
300 - removed post_stop function so we keep existing config
301 - added pre_stop to set the ESSID variable
302 - changed to veinfo/vewarn where appropriate
303 - check if interface exists otherwise abort gracefully
304 - no longer deletes addresses as we now avoid
305 ipv6 local addresses in detecting if interface has an addresses or not
306
307 net-scripts/init.d/ifconfig:
308 - added flag enable/disable function
309 - scope:link inet6 addresses are ignored when testing is_up and
310 del_addresses - fixes bug #65417
311
312 net-scripts/init.d/iproute2:
313 - added flag enable/disable function
314 - scope:link inet6 addresses are ignored when testing is_up and
315 del_addresses - fixes bug #65417
316
317 net-scripts/init.d/macchanger:
318 - fixed detecting whether the change worked or not, fixes bug #68893
319
320 net-scripts/init.d/vlan:
321 - fixed old config problem
322
323 31 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
324
325 Do not delete depscan and envupdate caches on reboot, as this should
326 improve bootup times - works nicely with the '-u' parameters of both.
327 Also move the '-u' parameter test of depscan.sh after the directory
328 exist test, else ${svcdir}/started/, etc do not exist. Modified both
329 /sbin/rc and /sbin/depscan.sh for this.
330
331 Move things around in /sbin/functions.sh to have all functions above.
332
333 Add the 'lo' option to RC_NET_STRICT_CHECKING to resolve bug #29225.
334
335 28 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
336
337 Only add files not managed by udev to device tarball, bug #57110.
338
339 28 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
340
341 Revert pam_console_apply udev check in bootmisc/halt.sh since
342 the bug is with pam_console_apply and not udev/pam.
343
344 Use ${EUID} instead of $(id -u) to help out BSD in runscript.sh.
345
346 Allow users to select ramfs instead of default tmpfs for mounting
347 on /dev with udev #69091.
348
349 Add issue.devfix which would be auto copied to /etc/issue if
350 /sbin/rc detects the user is missing /dev/null or /dev/console.
351 Includes a simple explanation/fix for what's wrong.
352
353 Make sure the clock init script runs after checkroot/modules/localmount
354 so that timestamps are synchronized asap #68133 / #70008.
355
356 Accept '-nc' as a short option to '--nocolor' #64736.
357
358 26 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
359
360 Don't use -A with fsck to respect the fs_passno since it'll try
361 to fsck all filesystems, not just the ones specified. Instead,
362 awk /etc/fstab to review the passno field in checkroot #68822.
363
364 Add support for 'gentoo=forcefsck' boot option in checkroot.
365
366 Make sure we run devfsd in /sbin/rc even when /dev has been
367 automounted by the kernel #68795.
368
369 Don't generate the device tarball in halt.sh with livecds #68469.
370
371 25 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
372
373 net-scripts/net.modules.d/ifconfig:
374 - Simplify ifconfig_is_up()
375 - Fix ifconfig_get_aliases_rev() to actually work... you can't
376 specify an interface name to ifconfig if you want to see the
377 aliases.
378 - Workaround a couple ifconfig bugs dealing with aliases
379 - Correct a return status in ifconfig_interface_del_addresses()
380 - ifconfig_iface_stop() is bool, not void; fix the comments
381
382 net-scripts/net.modules.d/iproute2:
383 - iproute2_iface_stop() is bool, not void. Fix the code so it
384 returns meaningful values
385
386 net-scripts/init.d/net.lo:
387 - Fix preferred (ifconfig/dhcpcd) module loading so it doesn't
388 barf when a preferred module is either (1) missing from
389 net.modules.d or (2) not available due to missing dependencies
390 - When loading all modules in order to stop an interface, only use
391 the first available to satisfy each class wrapper
392
393 24 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
394
395 Include livecd patch that was applied to baselayout-1.9.4-r6
396 to use agetty instead of mingetty
397
398 24 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
399
400 Mount tmpfs instead of ramfs on /dev when using udev systems.
401 The problem with ramfs is that it has no size limitations so
402 one could easily take down their machine by accident #68653.
403
404* rc-scripts 1.6.3 (23 Oct 2004)
405
406 22 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
407
408 Add support for user_eth0 in the adsl module and in net.example.
409 This means that most users won't need to edit pppoe.conf at all
410
411 21 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
412
413 Remove old etc/conf.d/net and try to clarify instructions in
414 net-scripts/conf.d/net.example. Add example for ADSL
415
416 21 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
417
418 Merge all of the UML checks into one function, is_uml_sys(),
419 which is now in functions.sh.
420
421 18 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
422
423 Add v-e-commands (veinfo, vbegin, etc) to sbin/functions.sh that
424 depend on RC_VERBOSE which defaults to no. Add --verbose to args
425 understood by runscript.sh.
426
427 In net.lo, use veinfo and friends when loading modules since this
428 information is confusing to users.
429
430 In net.lo, always load global "modules" setting in following
431 "modules_iface" since this is a little easier for users to
432 understand.
433
434 In net.lo, use eindent for output of pre/post scripts
435
436 18 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
437
438 Add shfs to our list of net filesystems #61452. Also add afs/nfs4.
439
440 Add a '-u' parameter to depscan.sh to allow for updates only when
441 the config files have changed. With /sbin/rc using this, we speed
442 up bootup by only regenerating the cache when need be #67976. Also
443 add a '-u' parameter to env-update.sh for same reasons.
444
445 Don't run depscan.sh in rc-update anymore since the cache files don't
446 depend on runlevels (which is all that rc-update modifies).
447
448 Add unicode support to keymaps/consolefont #32111 and UML support #29707.
449
450 Add checks to many filesystem operations in the eventuality that the
451 filesystems are mounted read only.
452
453 16 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
454
455 Update the default fstab /dev/shm mount to include the nodev, nosuid,
456 and noexec mount flags. No reason for the filesystem to have those.
457
458 Cleaned up the clock init script. Moved the clock options out of
459 rc.conf and into its own conf.d/clock file. Added support for the
460 weird Alpha consoles SRM/ARC since they need special config options.
461 Also made the syncing of system clock to hardware clock at shutdown
462 optional (with the default being off) #15834. Don't try to set the
463 clock if running inside a coLinux environment #52870.
464
465 Update default PATH ordering to try to follow default behavior in
466 other distro's and because it's logical that /usr/local should
467 override /usr which should override /. Fixes #12531.
468
469 Move devfs stuff out of baselayout and into the devfsd package.
470
471 Don't run /sbin/pam_console_apply -r if using udev on /dev #50315.
472
473 14 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
474
475 Fix rc-status to work with new COLS code.
476
477 14 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
478
479 Allow users to mount ramfs/tmpfs/ramdisk as their svcdir and
480 stop assuming ramfs==ramdisk #64079.
481
482 13 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
483
484 Rework the code for managing /dev to make it more flexible for
485 users. Some don't want to use devfs/udev but rather just create
486 their own nodes. Handles some issues with #44906 / #67276.
487
488 Move the utmp clearing code out of bootmisc and into /sbin/rc.
489 The utmp log must be cleared while in the initial boot level
490 (meaning inside /sbin/rc) because as soon as rc exists, init
491 writes a 'boot' record (`who -b`) which would normally be lost
492 when the bootmisc init.d script is run #61727.
493
494 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
495
496 Cosmetic fixes for starting loopback interface
497
498 SpanKY doesn't like the dots... disable them by default, but you
499 can set RC_DOT_PATTERN=' .' in /etc/conf.d/rc to get them back
500
501* rc-scripts 1.6.2 (13 Oct 2004)
502
503 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
504
505 Install net.modules.d to /lib/rcscripts instead of /etc so we
506 don't have to deal with CONFIG_PROTECT
507
508 Fix diff code in modules_load so it can identify which functions
509 have been modified
510
511 Fix fallback mechanism in iface_start so that it works correctly
512 and doesn't report a bogus error message when trying the fallback
513
514 Get rid of need_begin trickery in iface_stop
515
516 Simplify eend processing in dhcp modules
517
518 Implement eindent, eoutdent, esetdent in functions.sh and adjust
519 net-scripts to use them.
520
521 Re-write einfo, ewarn, eerror, ebegin, eend, ewend to use
522 RC_INDENTATION and to work better on serial terminals
523
524 Remove conf.d/net.ppp0 since that is provided by net-dialup/ppp
525
526 12 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
527
528 Fix ipaddr_fallback in net-scripts/conf.d/net.example
529
530 09 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
531
532 Remove init.d/net.eth0 net.lo and net.ppp0. The first two are
533 provided now by net-scripts and net.ppp0 is shipped in
534 net-dialup/ppp
535
536 Create NET_FS_LIST and is_net_fs in functions.sh and use them in
537 checkroot, localmount, netmount, net.example, and net.lo
538
539 09 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
540
541 If the hostname has already been set via the kernel/dhcp, don't
542 force it to 'localhost'. Used in netboot/terminal setups #38172.
543
544 Add domainname to default boot runlevel list #47041.
545
546 08 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
547
548 Make sure that when we try to mount /sys, we do so with -n (tigger).
549
550 Add some examples for nfs to sysctl.conf #66575.
551
552 06 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
553
554 Update to net-scripts 1.0.2 from Roy
555 ------------------------------------
556 - wireless module: replaced preferred_only var with
557 associate_order this makes more sense now as we have changed the
558 possible values
559 - wireless module: added patch from Daniel Zappala we should call
560 wireless_get_essid everywhere now
561 - wireless module: don't declare ESSID local in
562 wireless_configure(). This allows ESSID to be tested in the
563 user defined postup() function
564 - wireless module: test type != "NOT READY!" instead of testing =
565 IEEE. this resolves problems with intel and ra-tech drivers
566 - net.lo start() now errors when the interface does not exist
567 - dhcpcd, dhclient, udhcpc and pump now expose peer_* vars this
568 enables wireless to map them from peer_dns_ESSID
569 - config-system helper now loads wireless module to remap
570 variables from ESSID this allows udhcpc and dhclient to use
571 remapped wireless vars
572 - fixed dhcpcd and pump modules using peer_* vars
573 - wireless aborts after 5 seconds if it cannot report a valid
574 ESSID this fixes a potential infinite loop problem
575 - wireless_setup_iface() renamed to wireless_map_essid_vars() this
576 avoids confusion about what the function actually does
577
578 06 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
579
580 Change the default net.ipv4.conf.default.rp_filter setting to 1
581 in sysctl.conf since it shouldn't be harmful in anyway. Redhat
582 does the same.
583
584 05 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
585
586 Get rid of getcols() in sbin/functions.sh. Use COLUMNS when
587 possible and otherwise clean up the COLS code. Fix the "emerge
588 depend" detection code to use RC_ENDCOL="no"
589
590 05 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
591
592 Changed behavior of the domainname init.d script. It will now
593 override any settings obtained via dhcp/whatever. See #48277.
594
595 Updated bootmisc to dump the output of `dmesg` to /var/log/dmesg.
596 This way users have an 'after-boot' log of their dmesg saved
597 somewhere useful #55421.
598
599 Added the 'eend' back to depscan.sh since the script starts with a
600 call to 'ebegin' #59694.
601
602 Add selinux update from Chris PeBenito for src/runscript.c #64019.
603
604 Add more quoting to rc-help.sh to fix some non-critical errors.
605 Make rc-help.sh respect the value of RC_NOCOLOR. Allow RC_NOCOLOR
606 in functions.sh to be set via the environment.
607
608 Flesh out the default sysctl.conf with comments and more examples
609 since our previous one was pretty sparse #59993.
610
611 Change calls to `uniq` to `sort -u` in checkroot/halt.sh. This way
612 we only require sort in / and not both #36453.
613
614 04 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
615
616 More (I mean a LOT more) services. This takes care of #44458,
617 #52881 #55939 #58997 #66166 #66297. Gleaned many from the IANA
618 list/Fedora/FreeBSD/Debian.
619
620 Change the test for /proc/cmdline from -e to -r. On grsecurity
621 based systems for example, the file may exist, but not be readable
622 by non-root users (patch by Ned Ludd).
623
624 03 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
625
626 Add support for NFSv4 from #25106 to the netmount script. Don't
627 try to fsck / if the root is a remote filesystem (like NFS) #36624.
628
629 Update the fs_passno values in the default fstab to match the
630 settings suggested by the manpage #37314. Make checkroot respect
631 a fs_passno setting of 0 when dealing with / #39212. Change
632 default / filesystem type to ext3 instead of xfs #42670.
633
634 Re-order the arguments to mount to match POSIX requirements #66225.
635
636 Don't pipe swapon in localmount to /dev/null and ignore return
637 codes anymore. A swapon that works shows no output #39834.
638
639 02 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
640
641 Break up the COL/COLOR code properly this time. Not all serial
642 consoles can handle adjusting to the end of the line, so let's not
643 bother running stty at all anymore. This should fix up #32453.
644
645 30 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
646
647 Disable cryptfs by default in the conf.d file. Also cleanup
648 the output generated in localmount/checkfs/halt.sh for dm-crypt.
649 Add an extra check so that cryptfs is only run when the conf.d
650 file exists as well as /bin/cryptsetup.
651
652 29 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
653
654 Let glibc install nscd since different versions of glibc will
655 need to be handled differently. See #43076 by Rui Malheiro.
656
657 29 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
658
659 Prefer ~/.dir_colors over /etc/DIR_COLORS when it exists #64489
660
661 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
662
663 Clear the screen in .bash_logout #32330
664
665* rc-scripts 1.6.1 (27 Sep 2004)
666
667 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
668
669 Update dm-crypt to work with multi-line configuration files.
670 Also don't set status in a subshell; it was being lost before.
671
672 23 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
673
674 Rework the logic behind the $COLS code. It should not depend
675 on whether color is enabled. Also add a check for negative
676 values (like when using a serial console).
677
678* rc-scripts 1.6.0 (15 Sep 2004)
679
680 15 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
681
682 Fix bug 64034: simplify netmount script's stop function so that
683 mountpoints containing spaces work correctly
684
685 Update tarball.sh to use net-scripts
686
687 14 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
688
689 Commit dm-crypt enablement patch from Tigger (Rob Holland) in
690 bug 43146
691
692* rc-scripts 1.5.3 (18 Aug 2004)
693
694 18 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
695
696 Fix bug 60719 (request for better error messages from runscript)
697 by allowing errors to show on the screen when they're encountered
698 in wrap_rcscript
699
700 Apply Spock's bootsplash patch from bug 45784. This moves most of
701 the splash functionality out of baselayout.
702
703 13 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
704
705 Don't export PS1. Continuation of bug 26951, comments 60-62.
706
707* rc-scripts 1.5.2 (02 Aug 2004)
708
709 02 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
710
711 Related to bug 38955, don't set INPUTRC. Instead patch bash so
712 that it looks for /etc/inputrc automatically if ~/.inputrc is
713 missing. This is better than using INPUTRC since that will
714 override even after the user creates ~/.inputrc.
715
716 Fix bug 54275: Don't set INFODIR. The correct variable used by
717 texinfo is INFOPATH, which is already set in 00basic. Setting
718 INFODIR is useless, and breaks a NetBSD cross compile from Gentoo
719
720 01 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
721
722 Fix bug 58805: net.eth0 should use bridge so that bridge
723 interfaces are configured prior to net.br0 running
724
725 Fix bug 56856: Get rid of net.rej and integrate missing stuff to
726 conf.d/net
727
728 Apply half of spock's patch in bug 45784: Check for
729 conf.d/bootsplash instead of conf.d/bootsplash.conf
730
731 Fix bug 51351: Quote parsed output of /proc/filesystems to handle
732 octal sequences in mountpoint such as encoded spaces (\040)
733
734 Fix bug 46680: Add cifs support to localmount and netmount.
735 Thanks to Ronald Moesbergen for the patches
736
737 21 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
738
739 Fix bug 26952: Use /etc/bash/bashrc to setup PS1, testing $- to
740 determine if shell is interactive. The new system-wide bashrc is
741 installed by bash-2.05b-r10
742
743 19 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
744
745 Fix bug 38743: strip leading and trailing spaces from variable
746 values in genenviron.awk. Thanks to Marius Mauch for the patch.
747
748 09 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
749
750 Fix bug 55576: swap words "start" and "stop" in runscript.sh error
751 message
752
753* rc-scripts 1.5.1 (28 Jun 2004)
754
755 28 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
756
757 Fix dhcp in iface_start_ifconfig: It was re-using the variable
758 ${i} which would result in the following error:
759 /sbin/runscript.sh: line 441: ((: 16.141.88.153: syntax error
760 in expression (error token is ".141.88.153")
761
762 Use vlan_IFACE instead of iface_IFACE_vlans in net.eth0 for more
763 consistent vlan configuration. Thanks to robbat2 in bug 55394
764 (not fully resolved)
765
766 Add example for checking if root filesystem is NFS-mounted via
767 predown function in conf.d/net for bug 53104. This might be
768 better integrated at some point into net.eth0
769
770* rc-scripts 1.5.0 (26 Jun 2004)
771
772 26 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
773
774 Fix bug 47659: support iproute2-style configuration. Thanks to
775 Dean Bailey for some fantastic patches, including documentation
776 for conf.d/net. This is a pretty huge re-write of net.eth0
777
778 Fix bug 34607: provide examples for in conf.d/net for preup,
779 postup, predown, postdown functions. Also pay attention to return
780 value from predown function (previously ignored)
781
782 15 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
783
784 Fix bug 25975: support adsl in net.eth0. Thanks to Patrick McLean
785 for the initial pass at the code.
786
787 Fix bug 34140: add --servicelist option to rc-status. Thanks to
788 Eldad Zack for the patch.
789
790 Fix bug 37418: fix order of LVM and RAID in checkfs. Thanks to
791 Raimondo Giammanco for the patch.
792
793* rc-scripts 1.4.16 (06 Jun 2004)
794
795 06 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
796
797 Only call generate-modprobe.conf with --assume-kernel if
798 modules-update was called with --assume-kernel. This means that
799 only catalyst has the dependency on module-init-tools, not
800 everybody with the newer baselayout
801
802* rc-scripts 1.4.15 (21 May 2004)
803
804 21 May 2004; Aron Grifis <agriffis@gentoo.org>:
805
806 Fix bug 51570: typo on line 161 of /sbin/livecd-functions.sh
807
808 Fix bug 51626: wrong variable declaration at top of
809 get_bootparam() in /sbin/functions.sh
810
811* rc-scripts 1.4.14 (17 May 2004)
812
813 17 May 2004; Aron Griffis <agriffis@gentoo.org>:
814
815 Bump version to 1.4.14 to push out gmsoft's fix for hppa console
816 on ttyB0
817
818* rc-scripts 1.4.13 (15 May 2004)
819
820 15 May 2004; Aron Griffis <agriffis@gentoo.org>:
821
822 Bump version to 1.4.13 to push out Gustavo's livecd serial console
823 fixes for sparc and hppa.
824
825* rc-scripts 1.4.12 (07 May 2004)
826
827 10 May 2004; Aron Griffis <agriffis@gentoo.org>:
828
829 Bump version to 1.4.12 to release these critical bug fixes
830
831 Fix bug 50434: The new version of start-stop-daemon changes
832 directory to / by default unless --chdir is specified. Revert
833 this behavior to maintain working directory. This fixes openvpn
834 startup (probably among other things). Thanks to Sven Wegener for
835 the patch.
836
837 Fix bug 50448: Four days ago I changed bash loops to use the wrong
838 conditional syntax in net.eth0. Thanks to Sven Wegener for
839 pointing out the problem and providing a patch.
840
841* rc-scripts 1.4.11 (07 May 2004)
842
843 07 May 2004; Aron Griffis <agriffis@gentoo.org>:
844
845 Fix bug 20597: Skip RCS files when updating modules
846
847 Fix bug 49926: Add a --assume-kernel flag to modules-update. This
848 requires a companion patch in module-init-tools-3.0-r2 to handle
849 the same flag in generate-modprobe.conf; this dependency won't be
850 handled in the baselayout ebuild since it only affects livecd
851 building.
852
853 06 May 2004; Aron Griffis <agriffis@gentoo.org>:
854
855 In net.eth0, fix many instances of loops like "for ((i = 0; i <
856 100; i = i + 1))". The problem here is that the middle comparison
857 is being interpreted as a bash conditional, which means that it's
858 doing string comparison by default. It needs to be "i -lt 100"
859
860 Fix bug 34827: net.eth0 breaks when localized because the ifconfig
861 output changes. Wrap ifconfig in a function that overrides
862 LC_ALL=C
863
864 Fix bug 48305: Provide a new network configuration variable
865 ifconfig_fallback_eth0 which allows one to specify a fallback
866 configuration in case DHCP fails.
867
868 Fix bug 50246: Give root an invalid password ("*" in /etc/shadow)
869 in the default baselayout. This prevents the first reboot after
870 installation from having a blank password.
871
872 05 May 2004; Aron Griffis <agriffis@gentoo.org>:
873
874 Fix bug 48595: Make sure $(id -u) is zero (root user) when running
875 init scripts to avoid a lot of error messages.
876
877 Replace many lines of awk with two lines of grep in
878 init.d/localmount
879
880 Fix bug 44316: Use 0644 instead of 0640 for resolv.conf in net.ppp0
881
882 03 May 2004; Aron Griffis <agriffis@gentoo.org>:
883
884 Update to version 1.10.20 of Debian's start-stop-daemon (contained
885 in dpkg at http://packages.debian.org/testing/base/dpkg). This
886 fixes bug 22686 (start-stop-daemon in baselayout doesn't allow
887 altered nicelevel).
888
889* rc-scripts 1.4.10 (25 Apr 2004)
890
891 25 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
892
893 Fix typos in sbin/rc: "try try mount" and "mount ... & >/dev/null"
894 Also removed the errstr double-checking since the need for that is
895 alleviated by these typo fixes.
896
897 23 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
898
899 Fix bug 48629 (/sbin/rc fixups for udev) with patch from GregKH
900
901 Fix bug 40987 (gentoo should be able to boot with an empty /dev)
902 with patch from Spanky. The patch avoids redirection to /dev/null
903 when it doesn't exist; this was breaking /sbin/rc.
904
905* rc-scripts 1.4.9 (15 Apr 2004)
906
907 15 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
908
909 Fix bug 47111 (severe depcache problems) with tons of help from
910 dswhite42 and the rest of the crew in that bug. Thanks guys!
911
912* rc-scripts 1.4.8 (14 Apr 2004)
913
914 14 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
915
916 Fix bug 47623 (error removing inet6 addresses) with patch provided
917 by Vlad Yasevich.
918
919* rc-scripts 1.4.7 (12 Apr 2004)
920
921 12 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
922
923 Fix bug 47218 (net.eth0 broken for vlans) with patch provided by
924 Andy Dustman. Fix bug 47250 (depscan.sh fails to create
925 /var/lib/init.d/* directories) with patch from Terje Bergström.
926
927* rc-scripts 1.4.6 (08 Apr 2004)
928
929 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
930
931 Update patch from Gustavoz; -ln /bin/bash should have been -nl /bin/bash
932
933* rc-scripts 1.4.5 (08 Apr 2004)
934
935 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
936
937 Patch init.d/checkroot to list / (root) only once in mtab; see bug 38360.
938 Patch from Gustavoz to livecd-functions.sh to run bash instead of login on
939 serial consoles, necessary due to scrambled root passwords.
940
941* rc-scripts 1.4.4 (07 Apr 2004)
942
943 07 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
944
945 Patch from Gustavoz for Sparc console: Fetch LIVECD_CONSOLE from dmesg
946 output. Also support 4800 baud correctly.
947
948 16 Mar 2004; Aron Griffis <agriffis@gentoo.org>:
949
950 The changes in this commit pertain primarily to
951 http://bugs.gentoo.org/show_bug.cgi?id=19695
952 http://bugs.gentoo.org/show_bug.cgi?id=35736
953
954 Specify routes as an array per interface, for example:
955 routes_eth0=(
956 "-net 10.1.0.0 netmask 255.255.0.0 gw 10.0.0.5"
957 "-net 10.2.0.0 netmask 255.255.0.0 gw 10.0.0.6"
958 "-host 10.3.0.1 dev eth0"
959 )
960
961 You can optionally use the gateway variable or just put the default route
962 in the routes variable. The following two are REDUNDANT:
963
964 routes_eth0=( "default gw 10.0.0.5" )
965 gateway="eth0/10.0.0.5"
966
967 Old configuration variables in /etc/conf.d/net are fully supported and
968 used transparently if ifconfig_eth0 is missing. In other words, this new
969 script is fully backward-compatible. However you can get rid of
970 iface_eth0, alias_eth0, broadcast_eth0 and netmask_eth0 if you want by
971 using the new syntax:
972
973 ifconfig_eth0=(
974 "10.0.0.6 broadcast 10.0.255.255 netmask 255.255.0.0"
975 "192.168.1.1 netmask 255.255.255.0"
976 "123.456.789.1"
977 )
978
979 Full backward compatibility so no danger to screwing up users relying on
980 existing /etc/conf.d/net setup
981
982 NET_DEBUG can be set in the environment for copious debugging output
983
984 Deprecate [ ] in favor of [[ ]] which has fewer quoting issues and
985 better functionality (and is even slightly faster)
986
987 Properly localize all variables, including variables returned by
988 setup_vars
989
990 Allow full options for every ifconfig command, both base address and
991 aliases via ifconfig_eth0, replacing the convoluted and less-functional
992 iface_eth0, alias_eth0, broadcast_eth0, netmask_eth0
993
994 Provide full support for static routes via routes_eth0
995
996 Fix potential quoting problems in setup_vars by using better eval syntax
997 instead of eval echo
998
999 Display IP addresses while configuring, both DHCP-retrieved and
1000 statically set addresses
1001
1002 Collapse redundant caching of $? since eend returns $? again
1003
1004 Report when keeping kernel configuration for an interface along with IP
1005 address gleaned
1006
1007 Don't reset the default gateway if it is already set correctly
1008
1009 Don't bind default gateway to particular interface when /sbin/route is
1010 called so that it can survive if there is more than one interface on the
1011 required subnet. (Old behavior can be obtained by setting
1012 routes_eth0="default gw 1.2.3.4 dev eth0" if you really want it)
1013
1014 Don't bomb if default gateway can't be set since that doesn't
1015 necessarily mean that the interface configuration is invalid.
1016 (Old behavior was completely broken, but commented section
1017 demonstrates how to do it right if necessary)
1018
1019 iface_stop no longer relies on configuration in /etc/conf.d/net AT ALL.
1020 This is very good because it means you can put new configuration in
1021 /etc/conf.d/net, then restart the interface and the old configuration will
1022 be properly shut down.
1023
1024 iface_stop reports when it is releasing the DHCP lease
1025
1026* rc-scripts 1.4.3.13p1 (26 Feb 2004)
4 1027
5 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1028 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
6 1029
7 Remove /etc/DIR_COLORS, as coreutils provides it now. 1030 Remove /etc/DIR_COLORS, as coreutils provides it now.
1031
1032 Add RC_DEVICE_TARBALL to /etc/conf.d/rc to control use of device tarball.
1033 Also modified /sbin/rc and /etc/init.d/halt.sh for this.
1034
1035 Start udevd if present.
1036
1037 Small fix to sbin/rc-services.sh related to mtime checking and 'net'
1038 virtual service - it had no mtime generated, so check_mtime() failed
1039 for it ...
8 1040
9 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1041 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
10 1042
11 Update to enable checking of mtimes on rc-scripts, and auto running 1043 Update to enable checking of mtimes on rc-scripts, and auto running
12 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO 1044 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO
1395 2427
1396 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified 2428 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified
1397 /etc/env.d/00basic for this. 2429 /etc/env.d/00basic for this.
1398 2430
1399 Add some new daemon stop and pid detection stuff to /sbin/functions.sh. 2431 Add some new daemon stop and pid detection stuff to /sbin/functions.sh.
1400 Nothing official, but I spent enouth time on it not to want to loose it :) 2432 Nothing official, but I spent enough time on it not to want to loose it :)
1401 2433
1402 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs 2434 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs
1403 to give output to stderr. This was caused by a call to "stty", which when 2435 to give output to stderr. This was caused by a call to "stty", which when
1404 run without a attatched terminal, have this effect. Basically just pipe 2436 run without a attatched terminal, have this effect. Basically just pipe
1405 stderr to /dev/null. 2437 stderr to /dev/null.

Legend:
Removed from v.1.324  
changed lines
  Added in v.1.509

  ViewVC Help
Powered by ViewVC 1.1.20