/[gentoo-src]/rc-scripts/ChangeLog
Gentoo

Diff of /rc-scripts/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.324 Revision 1.512
1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts 1# ChangeLog for Gentoo System Intialization ("rc") scripts
2# Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL 2# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPLv2
3# Written by Daniel Robbins (drobbins@gentoo.org) 3
4 26 Nov 2004; Roy Marples <uberlord@gentoo.org>:
5
6 Fixed up address detection in apipa
7 net.lo now checks for duplicate static IPv4 addresses before assigning
8 iwconfig now supports preassociate and postassociate user hooks
9 net.example - changed $1 to ${IFACE} in examples
10 clarified lack of linux-wlan-ng support
11
12 24 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
13
14 Allow users to specify charset option to dumpkeys when using unicode
15 in conf.d/keymaps #72225. Also move all the init.d/keymap specific
16 options out of rc.conf and into conf.d/keymaps and add some config
17 checks to init.d/keymaps like the clock/hostname init.d scripts.
18
19 24 Nov 2004; Roy Marples <uberlord@gentoo.org>:
20
21 Ensure all net-scripts modules depend on interface_variable function
22 where applicable
23 Fixed adsl stopping - #68934. Thanks to Andreas Kauer
24
25 23 Nov 2004; Roy Marples <uberlord@gentoo.org>:
26
27 iproute2 does not need to create dummy interfaces for aliases
28 unlike ifconfig so we no longer do this
29 We now bring down all aliases and addresses properly
30 Split off some functions from net.lo into helpers.d/functions
31 so that our DHCP helper scripts can use them too :)
32 Deprecated interface specific setup in favour of a generic config
33 macchanger brings interface up now - fixes #71929
34 DHCP over VLAN now works - fixes #71860
35 Disabled modified function checking as it's far too expensive on CPU
36 and still isn't 100% reliable
37 When specifing a module that isn't emerged, you now get an error
38 telling you what to emerge
39 Removed -p option from the diff call used for function removal
40 Removed rp_filter setting - fixes first part of bug #71971
41 Added sysctl.conf settings relating to rp_filter to sysctl.conf
42 - fixes last part of bug #71971
43 Fixed pump exporing ntp servers
44 implemented MODULES_DIR so we can change directory we load from on the fly
45 fixed variables for vlans in most modules
46
47 19 Nov 2004; Aron Grffis <agriffis@gentoo.org>:
48
49 Remove crap "ll" and "d" aliases from skel .bashrc
50
51 19 Nov 2004; Roy Marples <uberlord@gentoo.org>:
52
53 tests for hostname (none) when sending hostname via dhcpcd, udhpc or pump
54 udhcpc now does correct signal handling so we can release leases and
55 terminate cleanly
56 Improved pump process detection
57 Rewrote udhcpc helper scripts around udhcpc and wrapped dhclient to udhcpc
58 scripts. This makes things much saner as udhcpc is much saner - also fixed
59 essidnet and ipv6 local link for them.
60 removed iproute2 udhcpc reliance on the "bc" command
61
62 17 Nov 2004; Roy Marples <uberlord@gentoo.org>:
63
64 Fixed invalid variable handling in bonding and vlan - bug #71419
65 apipa now brings the interface up before testing if address exists
66 Updated bonding documentation - bug #71419
67 Fixed iproute2 adding addresses for vlans - bug #71419
68 ifconfig handle inet6 routing automatically - bug #33310
69 ifconfig - fixed old gateway + gateway in routes conflict
70 iproute2 cleaned up some functions
71
72 16 Nov 2004; Roy Marples <uberlord@gentoo.org>:
73
74 We no longer default a fallback to APIPA when no config is given
75 net.example fleshed out a bit more for dhcpcd - fixes #60845
76 Improved forced module handling a touch
77 modules_sort and modules_check_user in net.lo buffer _provides,
78 _before and _after in arrays to avoid shelling out
79
80 15 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
81
82 Add a check to clock init.d to make sure users dont try to set
83 config their clock in rc.conf anymore.
84
85 Redo hostname/domainname scripts to use files in /etc/conf.d/
86 instead of creating files in /etc/. Allows for controlling things
87 like the behavior of setting the 'domain' in resolv.conf since users
88 may not always understand exactly what's going on.
89
90 Stop referring to conf.d/basic as a global rc config option. That
91 file hasn't been used in a long time and has since been replaced
92 with env.d/00basic. Updated sbin/runscript.sh, etc/profile,
93 sbin/rc-help.sh, and src/awk/cachedepends.awk.
94
95 Run `find | xargs` instead of `find -exec`. Much better performance
96 this way, and busybox friendly #59732.
97
98 15 Nov 2004; Roy Marples <uberlord@gentoo.org>:
99
100 Split modules_load into smaller more managable functions in net.lo
101 Added modules_force option to net.lo with a big phat warning in
102 net.example about it potentially breaking networking
103 Added searchdomains_ESSID option to essidnet
104 Stopped the domain setting from putting the same entry in search
105 in config-system and essidnet
106 Removed second warning in net.lo when configuration not set
107 Documented APIPA module in net.example
108 Added kernel checking for vlan - fixes #70829
109 Added kernel checking for bonding, bridging and tuntap
110 Added iproute2 support to the APIPA module
111
112 13 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
113
114 Update the svcdir mounting #69595. Instead of mounting in /mnt
115 and then bind mounting to $svcdir, we mount the ramdisk on $svcidr.
116
117 12 Nov 2004; Roy Marples <uberlord@gentoo.org>:
118
119 Added arping duplicate address detection to net.lo
120 Created Automatic Private IP Addressing (APIPA) module
121
122 Added dependancy checking to ipppd
123 Bonding is now started pre instead of post
124 Fixed iface variable in dhcp modules for vlans
125 Changed get_device to interface_device
126 Changed get_type to interface_type
127 Added vlan configuration options and documented them in net.example
128 Fixed bridge configuration handling
129 Removed _get_vlans from iproute2 and ifconfig as vlan now does it itself
130
131 11 Nov 2004; Roy Marples <uberlord@gentoo.org>:
132
133 Fixed category of rp-pppoe to net-dialup error when requesting ADSL
134 Improved inet6 address deletion and detection in iproute2
135 Improved gateway logic in ifconfig
136 Changed all wireless reporting functions to use iwgetid instead of
137 parsing iwconfig output except for essid
138
139* rc-scripts 1.6.6 (08 Nov 2004)
140
141 08 Nov 2004; Roy Marples <uberlord@gentoo.org>:
142
143 Added options to configure bridge
144 Added bridge configuration example to net.example
145 Added missing required function interface_exists to iptunnel check_depends
146
147 07 Nov 2004; Aron Griffis <agriffis@gentoo.org>:
148
149 Fix shell scripting errors that would result in
150 /sbin/functions.sh: line 166: [: too many arguments.
151
152 05 Nov 2004; Roy Marples <uberlord@gentoo.org>:
153
154 net-scripts/net.modules.d/bridge
155 - fixed destroying a bridge if no ports were added
156 - starts interfaces if they don't exist - fixed bug #65153
157
158 net-scrips/net.modules.d/bonding
159 - starts interfaces if they don't exist
160
161 net-scripts/init.d/net.lo
162 - added net_start() function to start depandant ifaces
163 so that bridge br0 can active tun0 which net.tun0 has to create
164 - added use dependany on wlan incase we're using linux-wlan-ng drivers
165 fixes bug #64978
166 - moved start() to run_start() and stop() to run_stop()
167 created run() and new start()/stop() functions
168 this is so that we have one single entry point to localise variables
169 and to remove any added functions loaded by our modules
170 - removed redundant interface_exists() as it's provided by
171 ifconfig and/or iproute2
172
173 net-scripts/net.modules.d/ifconfig and iproute2
174 - added ifconfig_tunnel and iproute2_tunnel functions
175
176 addred gre/ipip tunnel support via the the tunnel module
177 - fixes bug #50765
178
179 04 Nov 2004; Roy Marples <uberlord@gentoo.org>:
180
181 net-scripts/net.modules.d/pump
182 - fixed setting ntp servers
183
184 net-scripts/net.modules.d/dhcpcd
185 - fixed stopping function
186
187 net-scripts/net.modules.d/bonding
188 - fixed module to actually work with the interface
189
190 net-scripts/init.d/net.lo
191 - we remove all added functions when restarting an interface
192 this relies on the diff command being available
193
194 added isdn support via the new ipppd module - fixes bug #69035
195
196 net-scripts/conf.d/net.example
197 - added sample isdn setup
198
199 net-scripts/conf.d/wireless.example
200 - added better descriptions to the _sleep variables
201
202 Fixed boolean logic error when testing is_net_up in /sbin/runscript.sh
203 - fixed bug #70022
204
205 net.lo - added get_type function to return the type of the interface
206 - eth, ippp, etc
207
208 ipppd, tuntap
209 - start() moved to pre_start() and we now test by type
210 this means you no longer need ifconfig_ippp0=( "isdn" "dhcp" )
211 as ippp0 is always an isdn device
212
213 bridge - fixed stop function and moved start() to pre_start()
214 and automatically start if the variable bridge_${iface} exists
215
216 net.example - fixed up documentation for changed behaviour above
217
218 03 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
219
220 When launching critical services in /sbin/rc, make sure we source
221 the conf.d file (if it exists). Resolves #69956.
222
223 03 Nov 2004; Roy Marples <uberlord@gentoo.org>:
224
225 net-scripts/init.d/net.lo
226 - fixed !module when it's not installed
227 - we can now specify null inet addresses in the config
228 this allows a pure inet6 setup
229 - shutdown lo the same way we bring it up
230
231 net-scripts/net.modules.d/ifconfig
232 - changed IPv6 to inet6 in output of adding inet6 addresses
233 - just output inet6 address removed, not eth0 del foo
234
235 net-scripts/net.modules.d/iproute2
236 - fix deletion of non-link addresses - fixes bug #65417 (again)
237 - handle inet6 addresses like ifconfig - fixes more bug #65417
238
239 net-scripts/conf.d/net.example
240 - noted that inet6 addresses do not create aliases
241 - added examples of assigning inet6 addresses
242
243 net-scripts/net.modules.d/iwconfig
244 - improve error message when card does not support scanning
245
246 net-scripts/conf.d/wireless.example
247 - fixed comment regarding preferred_aps not working with cards that don't
248 support scanning
249
250 02 Nov 2004; Roy Marples <uberlord@gentoo.org>:
251
252 net-scripts/conf.d/net.example
253 - added bridging and tuntap examples
254
255 net-scripts/init.d/net.lo
256 - modprobe ${IFACE} when ${IFACE} does not exist
257
258 net-scripts/net.modules.d/ifconfig
259 - fixed interface existance check
260
261 net-scripts/net.modules.d
262 ifconfig & iproute2
263 - added boolean to interface_exists to report if it exists or not
264 - added checks to see if the interface exists or not when starting
265
266 dhcpcd
267 - removed debug line
268
269 bonding, dhclient, dhcpcd, essidnet, macchanger, pump, udhcpc
270 - added checks to see if the interface exists or not when starting
271
272 tuntap
273 - added checks to see if the interface exists or not when stopping
274
275 01 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
276
277 Dump the error message that hwclock returns since it tends to be
278 quite useful. Modified init.d/clock.
279
280 Fix error in functions.sh [ -z "$@" ] -> [[ -z "$@" ]] #69789.
281
282 Don't create /dev/sndstat link anymore in populate_udev per #69635.
283
284 01 Nov 2004; Roy Marples <uberlord@gentoo.org>:
285
286 net-scripts/init.d/net.lo:
287 - modules specified by interface config now error if they are not loaded
288 - moved interface check to after preup incase user preup loads drivers
289 - modules can be explicitly not used by prefixing them with a !
290 however, they are still available to other modules
291 fixes bugs #68908, #69027
292 - remove check to see if interface exists
293 - modules may setup new interfaces and still require config
294 so we have a new label counter in iface_start
295 - removed the check to see if a class wrapping already exists
296 this fixes the bug where ifconfig and iproute2 are installed, but
297 ifconfig is asked for and the interface is restarted.
298 - added check to see if the configured module is loaded
299 and installed or not in iface_start
300 - add dependancy on isdn4linux - fixes bug #69035
301 - interface_exists moved to iproute and ifconfig
302
303 net-scripts/net.modules.d
304 - Split wireless module into iwconfig and essidnet modules
305 - Added tuntap and bridge modules, fixes bug #55394, #30688
306
307 net-scripts/init.d/iwconfig:
308 - wep mode is now reported
309 - removed post_stop function so we keep existing config
310 - added pre_stop to set the ESSID variable
311 - changed to veinfo/vewarn where appropriate
312 - check if interface exists otherwise abort gracefully
313 - no longer deletes addresses as we now avoid
314 ipv6 local addresses in detecting if interface has an addresses or not
315
316 net-scripts/init.d/ifconfig:
317 - added flag enable/disable function
318 - scope:link inet6 addresses are ignored when testing is_up and
319 del_addresses - fixes bug #65417
320
321 net-scripts/init.d/iproute2:
322 - added flag enable/disable function
323 - scope:link inet6 addresses are ignored when testing is_up and
324 del_addresses - fixes bug #65417
325
326 net-scripts/init.d/macchanger:
327 - fixed detecting whether the change worked or not, fixes bug #68893
328
329 net-scripts/init.d/vlan:
330 - fixed old config problem
331
332 31 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
333
334 Do not delete depscan and envupdate caches on reboot, as this should
335 improve bootup times - works nicely with the '-u' parameters of both.
336 Also move the '-u' parameter test of depscan.sh after the directory
337 exist test, else ${svcdir}/started/, etc do not exist. Modified both
338 /sbin/rc and /sbin/depscan.sh for this.
339
340 Move things around in /sbin/functions.sh to have all functions above.
341
342 Add the 'lo' option to RC_NET_STRICT_CHECKING to resolve bug #29225.
343
344 28 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
345
346 Only add files not managed by udev to device tarball, bug #57110.
347
348 28 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
349
350 Revert pam_console_apply udev check in bootmisc/halt.sh since
351 the bug is with pam_console_apply and not udev/pam.
352
353 Use ${EUID} instead of $(id -u) to help out BSD in runscript.sh.
354
355 Allow users to select ramfs instead of default tmpfs for mounting
356 on /dev with udev #69091.
357
358 Add issue.devfix which would be auto copied to /etc/issue if
359 /sbin/rc detects the user is missing /dev/null or /dev/console.
360 Includes a simple explanation/fix for what's wrong.
361
362 Make sure the clock init script runs after checkroot/modules/localmount
363 so that timestamps are synchronized asap #68133 / #70008.
364
365 Accept '-nc' as a short option to '--nocolor' #64736.
366
367 26 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
368
369 Don't use -A with fsck to respect the fs_passno since it'll try
370 to fsck all filesystems, not just the ones specified. Instead,
371 awk /etc/fstab to review the passno field in checkroot #68822.
372
373 Add support for 'gentoo=forcefsck' boot option in checkroot.
374
375 Make sure we run devfsd in /sbin/rc even when /dev has been
376 automounted by the kernel #68795.
377
378 Don't generate the device tarball in halt.sh with livecds #68469.
379
380 25 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
381
382 net-scripts/net.modules.d/ifconfig:
383 - Simplify ifconfig_is_up()
384 - Fix ifconfig_get_aliases_rev() to actually work... you can't
385 specify an interface name to ifconfig if you want to see the
386 aliases.
387 - Workaround a couple ifconfig bugs dealing with aliases
388 - Correct a return status in ifconfig_interface_del_addresses()
389 - ifconfig_iface_stop() is bool, not void; fix the comments
390
391 net-scripts/net.modules.d/iproute2:
392 - iproute2_iface_stop() is bool, not void. Fix the code so it
393 returns meaningful values
394
395 net-scripts/init.d/net.lo:
396 - Fix preferred (ifconfig/dhcpcd) module loading so it doesn't
397 barf when a preferred module is either (1) missing from
398 net.modules.d or (2) not available due to missing dependencies
399 - When loading all modules in order to stop an interface, only use
400 the first available to satisfy each class wrapper
401
402 24 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
403
404 Include livecd patch that was applied to baselayout-1.9.4-r6
405 to use agetty instead of mingetty
406
407 24 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
408
409 Mount tmpfs instead of ramfs on /dev when using udev systems.
410 The problem with ramfs is that it has no size limitations so
411 one could easily take down their machine by accident #68653.
412
413* rc-scripts 1.6.3 (23 Oct 2004)
414
415 22 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
416
417 Add support for user_eth0 in the adsl module and in net.example.
418 This means that most users won't need to edit pppoe.conf at all
419
420 21 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
421
422 Remove old etc/conf.d/net and try to clarify instructions in
423 net-scripts/conf.d/net.example. Add example for ADSL
424
425 21 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
426
427 Merge all of the UML checks into one function, is_uml_sys(),
428 which is now in functions.sh.
429
430 18 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
431
432 Add v-e-commands (veinfo, vbegin, etc) to sbin/functions.sh that
433 depend on RC_VERBOSE which defaults to no. Add --verbose to args
434 understood by runscript.sh.
435
436 In net.lo, use veinfo and friends when loading modules since this
437 information is confusing to users.
438
439 In net.lo, always load global "modules" setting in following
440 "modules_iface" since this is a little easier for users to
441 understand.
442
443 In net.lo, use eindent for output of pre/post scripts
444
445 18 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
446
447 Add shfs to our list of net filesystems #61452. Also add afs/nfs4.
448
449 Add a '-u' parameter to depscan.sh to allow for updates only when
450 the config files have changed. With /sbin/rc using this, we speed
451 up bootup by only regenerating the cache when need be #67976. Also
452 add a '-u' parameter to env-update.sh for same reasons.
453
454 Don't run depscan.sh in rc-update anymore since the cache files don't
455 depend on runlevels (which is all that rc-update modifies).
456
457 Add unicode support to keymaps/consolefont #32111 and UML support #29707.
458
459 Add checks to many filesystem operations in the eventuality that the
460 filesystems are mounted read only.
461
462 16 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
463
464 Update the default fstab /dev/shm mount to include the nodev, nosuid,
465 and noexec mount flags. No reason for the filesystem to have those.
466
467 Cleaned up the clock init script. Moved the clock options out of
468 rc.conf and into its own conf.d/clock file. Added support for the
469 weird Alpha consoles SRM/ARC since they need special config options.
470 Also made the syncing of system clock to hardware clock at shutdown
471 optional (with the default being off) #15834. Don't try to set the
472 clock if running inside a coLinux environment #52870.
473
474 Update default PATH ordering to try to follow default behavior in
475 other distro's and because it's logical that /usr/local should
476 override /usr which should override /. Fixes #12531.
477
478 Move devfs stuff out of baselayout and into the devfsd package.
479
480 Don't run /sbin/pam_console_apply -r if using udev on /dev #50315.
481
482 14 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
483
484 Fix rc-status to work with new COLS code.
485
486 14 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
487
488 Allow users to mount ramfs/tmpfs/ramdisk as their svcdir and
489 stop assuming ramfs==ramdisk #64079.
490
491 13 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
492
493 Rework the code for managing /dev to make it more flexible for
494 users. Some don't want to use devfs/udev but rather just create
495 their own nodes. Handles some issues with #44906 / #67276.
496
497 Move the utmp clearing code out of bootmisc and into /sbin/rc.
498 The utmp log must be cleared while in the initial boot level
499 (meaning inside /sbin/rc) because as soon as rc exists, init
500 writes a 'boot' record (`who -b`) which would normally be lost
501 when the bootmisc init.d script is run #61727.
502
503 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
504
505 Cosmetic fixes for starting loopback interface
506
507 SpanKY doesn't like the dots... disable them by default, but you
508 can set RC_DOT_PATTERN=' .' in /etc/conf.d/rc to get them back
509
510* rc-scripts 1.6.2 (13 Oct 2004)
511
512 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
513
514 Install net.modules.d to /lib/rcscripts instead of /etc so we
515 don't have to deal with CONFIG_PROTECT
516
517 Fix diff code in modules_load so it can identify which functions
518 have been modified
519
520 Fix fallback mechanism in iface_start so that it works correctly
521 and doesn't report a bogus error message when trying the fallback
522
523 Get rid of need_begin trickery in iface_stop
524
525 Simplify eend processing in dhcp modules
526
527 Implement eindent, eoutdent, esetdent in functions.sh and adjust
528 net-scripts to use them.
529
530 Re-write einfo, ewarn, eerror, ebegin, eend, ewend to use
531 RC_INDENTATION and to work better on serial terminals
532
533 Remove conf.d/net.ppp0 since that is provided by net-dialup/ppp
534
535 12 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
536
537 Fix ipaddr_fallback in net-scripts/conf.d/net.example
538
539 09 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
540
541 Remove init.d/net.eth0 net.lo and net.ppp0. The first two are
542 provided now by net-scripts and net.ppp0 is shipped in
543 net-dialup/ppp
544
545 Create NET_FS_LIST and is_net_fs in functions.sh and use them in
546 checkroot, localmount, netmount, net.example, and net.lo
547
548 09 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
549
550 If the hostname has already been set via the kernel/dhcp, don't
551 force it to 'localhost'. Used in netboot/terminal setups #38172.
552
553 Add domainname to default boot runlevel list #47041.
554
555 08 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
556
557 Make sure that when we try to mount /sys, we do so with -n (tigger).
558
559 Add some examples for nfs to sysctl.conf #66575.
560
561 06 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
562
563 Update to net-scripts 1.0.2 from Roy
564 ------------------------------------
565 - wireless module: replaced preferred_only var with
566 associate_order this makes more sense now as we have changed the
567 possible values
568 - wireless module: added patch from Daniel Zappala we should call
569 wireless_get_essid everywhere now
570 - wireless module: don't declare ESSID local in
571 wireless_configure(). This allows ESSID to be tested in the
572 user defined postup() function
573 - wireless module: test type != "NOT READY!" instead of testing =
574 IEEE. this resolves problems with intel and ra-tech drivers
575 - net.lo start() now errors when the interface does not exist
576 - dhcpcd, dhclient, udhcpc and pump now expose peer_* vars this
577 enables wireless to map them from peer_dns_ESSID
578 - config-system helper now loads wireless module to remap
579 variables from ESSID this allows udhcpc and dhclient to use
580 remapped wireless vars
581 - fixed dhcpcd and pump modules using peer_* vars
582 - wireless aborts after 5 seconds if it cannot report a valid
583 ESSID this fixes a potential infinite loop problem
584 - wireless_setup_iface() renamed to wireless_map_essid_vars() this
585 avoids confusion about what the function actually does
586
587 06 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
588
589 Change the default net.ipv4.conf.default.rp_filter setting to 1
590 in sysctl.conf since it shouldn't be harmful in anyway. Redhat
591 does the same.
592
593 05 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
594
595 Get rid of getcols() in sbin/functions.sh. Use COLUMNS when
596 possible and otherwise clean up the COLS code. Fix the "emerge
597 depend" detection code to use RC_ENDCOL="no"
598
599 05 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
600
601 Changed behavior of the domainname init.d script. It will now
602 override any settings obtained via dhcp/whatever. See #48277.
603
604 Updated bootmisc to dump the output of `dmesg` to /var/log/dmesg.
605 This way users have an 'after-boot' log of their dmesg saved
606 somewhere useful #55421.
607
608 Added the 'eend' back to depscan.sh since the script starts with a
609 call to 'ebegin' #59694.
610
611 Add selinux update from Chris PeBenito for src/runscript.c #64019.
612
613 Add more quoting to rc-help.sh to fix some non-critical errors.
614 Make rc-help.sh respect the value of RC_NOCOLOR. Allow RC_NOCOLOR
615 in functions.sh to be set via the environment.
616
617 Flesh out the default sysctl.conf with comments and more examples
618 since our previous one was pretty sparse #59993.
619
620 Change calls to `uniq` to `sort -u` in checkroot/halt.sh. This way
621 we only require sort in / and not both #36453.
622
623 04 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
624
625 More (I mean a LOT more) services. This takes care of #44458,
626 #52881 #55939 #58997 #66166 #66297. Gleaned many from the IANA
627 list/Fedora/FreeBSD/Debian.
628
629 Change the test for /proc/cmdline from -e to -r. On grsecurity
630 based systems for example, the file may exist, but not be readable
631 by non-root users (patch by Ned Ludd).
632
633 03 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
634
635 Add support for NFSv4 from #25106 to the netmount script. Don't
636 try to fsck / if the root is a remote filesystem (like NFS) #36624.
637
638 Update the fs_passno values in the default fstab to match the
639 settings suggested by the manpage #37314. Make checkroot respect
640 a fs_passno setting of 0 when dealing with / #39212. Change
641 default / filesystem type to ext3 instead of xfs #42670.
642
643 Re-order the arguments to mount to match POSIX requirements #66225.
644
645 Don't pipe swapon in localmount to /dev/null and ignore return
646 codes anymore. A swapon that works shows no output #39834.
647
648 02 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
649
650 Break up the COL/COLOR code properly this time. Not all serial
651 consoles can handle adjusting to the end of the line, so let's not
652 bother running stty at all anymore. This should fix up #32453.
653
654 30 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
655
656 Disable cryptfs by default in the conf.d file. Also cleanup
657 the output generated in localmount/checkfs/halt.sh for dm-crypt.
658 Add an extra check so that cryptfs is only run when the conf.d
659 file exists as well as /bin/cryptsetup.
660
661 29 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
662
663 Let glibc install nscd since different versions of glibc will
664 need to be handled differently. See #43076 by Rui Malheiro.
665
666 29 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
667
668 Prefer ~/.dir_colors over /etc/DIR_COLORS when it exists #64489
669
670 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
671
672 Clear the screen in .bash_logout #32330
673
674* rc-scripts 1.6.1 (27 Sep 2004)
675
676 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
677
678 Update dm-crypt to work with multi-line configuration files.
679 Also don't set status in a subshell; it was being lost before.
680
681 23 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
682
683 Rework the logic behind the $COLS code. It should not depend
684 on whether color is enabled. Also add a check for negative
685 values (like when using a serial console).
686
687* rc-scripts 1.6.0 (15 Sep 2004)
688
689 15 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
690
691 Fix bug 64034: simplify netmount script's stop function so that
692 mountpoints containing spaces work correctly
693
694 Update tarball.sh to use net-scripts
695
696 14 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
697
698 Commit dm-crypt enablement patch from Tigger (Rob Holland) in
699 bug 43146
700
701* rc-scripts 1.5.3 (18 Aug 2004)
702
703 18 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
704
705 Fix bug 60719 (request for better error messages from runscript)
706 by allowing errors to show on the screen when they're encountered
707 in wrap_rcscript
708
709 Apply Spock's bootsplash patch from bug 45784. This moves most of
710 the splash functionality out of baselayout.
711
712 13 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
713
714 Don't export PS1. Continuation of bug 26951, comments 60-62.
715
716* rc-scripts 1.5.2 (02 Aug 2004)
717
718 02 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
719
720 Related to bug 38955, don't set INPUTRC. Instead patch bash so
721 that it looks for /etc/inputrc automatically if ~/.inputrc is
722 missing. This is better than using INPUTRC since that will
723 override even after the user creates ~/.inputrc.
724
725 Fix bug 54275: Don't set INFODIR. The correct variable used by
726 texinfo is INFOPATH, which is already set in 00basic. Setting
727 INFODIR is useless, and breaks a NetBSD cross compile from Gentoo
728
729 01 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
730
731 Fix bug 58805: net.eth0 should use bridge so that bridge
732 interfaces are configured prior to net.br0 running
733
734 Fix bug 56856: Get rid of net.rej and integrate missing stuff to
735 conf.d/net
736
737 Apply half of spock's patch in bug 45784: Check for
738 conf.d/bootsplash instead of conf.d/bootsplash.conf
739
740 Fix bug 51351: Quote parsed output of /proc/filesystems to handle
741 octal sequences in mountpoint such as encoded spaces (\040)
742
743 Fix bug 46680: Add cifs support to localmount and netmount.
744 Thanks to Ronald Moesbergen for the patches
745
746 21 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
747
748 Fix bug 26952: Use /etc/bash/bashrc to setup PS1, testing $- to
749 determine if shell is interactive. The new system-wide bashrc is
750 installed by bash-2.05b-r10
751
752 19 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
753
754 Fix bug 38743: strip leading and trailing spaces from variable
755 values in genenviron.awk. Thanks to Marius Mauch for the patch.
756
757 09 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
758
759 Fix bug 55576: swap words "start" and "stop" in runscript.sh error
760 message
761
762* rc-scripts 1.5.1 (28 Jun 2004)
763
764 28 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
765
766 Fix dhcp in iface_start_ifconfig: It was re-using the variable
767 ${i} which would result in the following error:
768 /sbin/runscript.sh: line 441: ((: 16.141.88.153: syntax error
769 in expression (error token is ".141.88.153")
770
771 Use vlan_IFACE instead of iface_IFACE_vlans in net.eth0 for more
772 consistent vlan configuration. Thanks to robbat2 in bug 55394
773 (not fully resolved)
774
775 Add example for checking if root filesystem is NFS-mounted via
776 predown function in conf.d/net for bug 53104. This might be
777 better integrated at some point into net.eth0
778
779* rc-scripts 1.5.0 (26 Jun 2004)
780
781 26 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
782
783 Fix bug 47659: support iproute2-style configuration. Thanks to
784 Dean Bailey for some fantastic patches, including documentation
785 for conf.d/net. This is a pretty huge re-write of net.eth0
786
787 Fix bug 34607: provide examples for in conf.d/net for preup,
788 postup, predown, postdown functions. Also pay attention to return
789 value from predown function (previously ignored)
790
791 15 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
792
793 Fix bug 25975: support adsl in net.eth0. Thanks to Patrick McLean
794 for the initial pass at the code.
795
796 Fix bug 34140: add --servicelist option to rc-status. Thanks to
797 Eldad Zack for the patch.
798
799 Fix bug 37418: fix order of LVM and RAID in checkfs. Thanks to
800 Raimondo Giammanco for the patch.
801
802* rc-scripts 1.4.16 (06 Jun 2004)
803
804 06 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
805
806 Only call generate-modprobe.conf with --assume-kernel if
807 modules-update was called with --assume-kernel. This means that
808 only catalyst has the dependency on module-init-tools, not
809 everybody with the newer baselayout
810
811* rc-scripts 1.4.15 (21 May 2004)
812
813 21 May 2004; Aron Grifis <agriffis@gentoo.org>:
814
815 Fix bug 51570: typo on line 161 of /sbin/livecd-functions.sh
816
817 Fix bug 51626: wrong variable declaration at top of
818 get_bootparam() in /sbin/functions.sh
819
820* rc-scripts 1.4.14 (17 May 2004)
821
822 17 May 2004; Aron Griffis <agriffis@gentoo.org>:
823
824 Bump version to 1.4.14 to push out gmsoft's fix for hppa console
825 on ttyB0
826
827* rc-scripts 1.4.13 (15 May 2004)
828
829 15 May 2004; Aron Griffis <agriffis@gentoo.org>:
830
831 Bump version to 1.4.13 to push out Gustavo's livecd serial console
832 fixes for sparc and hppa.
833
834* rc-scripts 1.4.12 (07 May 2004)
835
836 10 May 2004; Aron Griffis <agriffis@gentoo.org>:
837
838 Bump version to 1.4.12 to release these critical bug fixes
839
840 Fix bug 50434: The new version of start-stop-daemon changes
841 directory to / by default unless --chdir is specified. Revert
842 this behavior to maintain working directory. This fixes openvpn
843 startup (probably among other things). Thanks to Sven Wegener for
844 the patch.
845
846 Fix bug 50448: Four days ago I changed bash loops to use the wrong
847 conditional syntax in net.eth0. Thanks to Sven Wegener for
848 pointing out the problem and providing a patch.
849
850* rc-scripts 1.4.11 (07 May 2004)
851
852 07 May 2004; Aron Griffis <agriffis@gentoo.org>:
853
854 Fix bug 20597: Skip RCS files when updating modules
855
856 Fix bug 49926: Add a --assume-kernel flag to modules-update. This
857 requires a companion patch in module-init-tools-3.0-r2 to handle
858 the same flag in generate-modprobe.conf; this dependency won't be
859 handled in the baselayout ebuild since it only affects livecd
860 building.
861
862 06 May 2004; Aron Griffis <agriffis@gentoo.org>:
863
864 In net.eth0, fix many instances of loops like "for ((i = 0; i <
865 100; i = i + 1))". The problem here is that the middle comparison
866 is being interpreted as a bash conditional, which means that it's
867 doing string comparison by default. It needs to be "i -lt 100"
868
869 Fix bug 34827: net.eth0 breaks when localized because the ifconfig
870 output changes. Wrap ifconfig in a function that overrides
871 LC_ALL=C
872
873 Fix bug 48305: Provide a new network configuration variable
874 ifconfig_fallback_eth0 which allows one to specify a fallback
875 configuration in case DHCP fails.
876
877 Fix bug 50246: Give root an invalid password ("*" in /etc/shadow)
878 in the default baselayout. This prevents the first reboot after
879 installation from having a blank password.
880
881 05 May 2004; Aron Griffis <agriffis@gentoo.org>:
882
883 Fix bug 48595: Make sure $(id -u) is zero (root user) when running
884 init scripts to avoid a lot of error messages.
885
886 Replace many lines of awk with two lines of grep in
887 init.d/localmount
888
889 Fix bug 44316: Use 0644 instead of 0640 for resolv.conf in net.ppp0
890
891 03 May 2004; Aron Griffis <agriffis@gentoo.org>:
892
893 Update to version 1.10.20 of Debian's start-stop-daemon (contained
894 in dpkg at http://packages.debian.org/testing/base/dpkg). This
895 fixes bug 22686 (start-stop-daemon in baselayout doesn't allow
896 altered nicelevel).
897
898* rc-scripts 1.4.10 (25 Apr 2004)
899
900 25 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
901
902 Fix typos in sbin/rc: "try try mount" and "mount ... & >/dev/null"
903 Also removed the errstr double-checking since the need for that is
904 alleviated by these typo fixes.
905
906 23 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
907
908 Fix bug 48629 (/sbin/rc fixups for udev) with patch from GregKH
909
910 Fix bug 40987 (gentoo should be able to boot with an empty /dev)
911 with patch from Spanky. The patch avoids redirection to /dev/null
912 when it doesn't exist; this was breaking /sbin/rc.
913
914* rc-scripts 1.4.9 (15 Apr 2004)
915
916 15 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
917
918 Fix bug 47111 (severe depcache problems) with tons of help from
919 dswhite42 and the rest of the crew in that bug. Thanks guys!
920
921* rc-scripts 1.4.8 (14 Apr 2004)
922
923 14 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
924
925 Fix bug 47623 (error removing inet6 addresses) with patch provided
926 by Vlad Yasevich.
927
928* rc-scripts 1.4.7 (12 Apr 2004)
929
930 12 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
931
932 Fix bug 47218 (net.eth0 broken for vlans) with patch provided by
933 Andy Dustman. Fix bug 47250 (depscan.sh fails to create
934 /var/lib/init.d/* directories) with patch from Terje Bergström.
935
936* rc-scripts 1.4.6 (08 Apr 2004)
937
938 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
939
940 Update patch from Gustavoz; -ln /bin/bash should have been -nl /bin/bash
941
942* rc-scripts 1.4.5 (08 Apr 2004)
943
944 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
945
946 Patch init.d/checkroot to list / (root) only once in mtab; see bug 38360.
947 Patch from Gustavoz to livecd-functions.sh to run bash instead of login on
948 serial consoles, necessary due to scrambled root passwords.
949
950* rc-scripts 1.4.4 (07 Apr 2004)
951
952 07 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
953
954 Patch from Gustavoz for Sparc console: Fetch LIVECD_CONSOLE from dmesg
955 output. Also support 4800 baud correctly.
956
957 16 Mar 2004; Aron Griffis <agriffis@gentoo.org>:
958
959 The changes in this commit pertain primarily to
960 http://bugs.gentoo.org/show_bug.cgi?id=19695
961 http://bugs.gentoo.org/show_bug.cgi?id=35736
962
963 Specify routes as an array per interface, for example:
964 routes_eth0=(
965 "-net 10.1.0.0 netmask 255.255.0.0 gw 10.0.0.5"
966 "-net 10.2.0.0 netmask 255.255.0.0 gw 10.0.0.6"
967 "-host 10.3.0.1 dev eth0"
968 )
969
970 You can optionally use the gateway variable or just put the default route
971 in the routes variable. The following two are REDUNDANT:
972
973 routes_eth0=( "default gw 10.0.0.5" )
974 gateway="eth0/10.0.0.5"
975
976 Old configuration variables in /etc/conf.d/net are fully supported and
977 used transparently if ifconfig_eth0 is missing. In other words, this new
978 script is fully backward-compatible. However you can get rid of
979 iface_eth0, alias_eth0, broadcast_eth0 and netmask_eth0 if you want by
980 using the new syntax:
981
982 ifconfig_eth0=(
983 "10.0.0.6 broadcast 10.0.255.255 netmask 255.255.0.0"
984 "192.168.1.1 netmask 255.255.255.0"
985 "123.456.789.1"
986 )
987
988 Full backward compatibility so no danger to screwing up users relying on
989 existing /etc/conf.d/net setup
990
991 NET_DEBUG can be set in the environment for copious debugging output
992
993 Deprecate [ ] in favor of [[ ]] which has fewer quoting issues and
994 better functionality (and is even slightly faster)
995
996 Properly localize all variables, including variables returned by
997 setup_vars
998
999 Allow full options for every ifconfig command, both base address and
1000 aliases via ifconfig_eth0, replacing the convoluted and less-functional
1001 iface_eth0, alias_eth0, broadcast_eth0, netmask_eth0
1002
1003 Provide full support for static routes via routes_eth0
1004
1005 Fix potential quoting problems in setup_vars by using better eval syntax
1006 instead of eval echo
1007
1008 Display IP addresses while configuring, both DHCP-retrieved and
1009 statically set addresses
1010
1011 Collapse redundant caching of $? since eend returns $? again
1012
1013 Report when keeping kernel configuration for an interface along with IP
1014 address gleaned
1015
1016 Don't reset the default gateway if it is already set correctly
1017
1018 Don't bind default gateway to particular interface when /sbin/route is
1019 called so that it can survive if there is more than one interface on the
1020 required subnet. (Old behavior can be obtained by setting
1021 routes_eth0="default gw 1.2.3.4 dev eth0" if you really want it)
1022
1023 Don't bomb if default gateway can't be set since that doesn't
1024 necessarily mean that the interface configuration is invalid.
1025 (Old behavior was completely broken, but commented section
1026 demonstrates how to do it right if necessary)
1027
1028 iface_stop no longer relies on configuration in /etc/conf.d/net AT ALL.
1029 This is very good because it means you can put new configuration in
1030 /etc/conf.d/net, then restart the interface and the old configuration will
1031 be properly shut down.
1032
1033 iface_stop reports when it is releasing the DHCP lease
1034
1035* rc-scripts 1.4.3.13p1 (26 Feb 2004)
4 1036
5 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1037 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
6 1038
7 Remove /etc/DIR_COLORS, as coreutils provides it now. 1039 Remove /etc/DIR_COLORS, as coreutils provides it now.
1040
1041 Add RC_DEVICE_TARBALL to /etc/conf.d/rc to control use of device tarball.
1042 Also modified /sbin/rc and /etc/init.d/halt.sh for this.
1043
1044 Start udevd if present.
1045
1046 Small fix to sbin/rc-services.sh related to mtime checking and 'net'
1047 virtual service - it had no mtime generated, so check_mtime() failed
1048 for it ...
8 1049
9 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1050 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
10 1051
11 Update to enable checking of mtimes on rc-scripts, and auto running 1052 Update to enable checking of mtimes on rc-scripts, and auto running
12 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO 1053 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO
1395 2436
1396 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified 2437 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified
1397 /etc/env.d/00basic for this. 2438 /etc/env.d/00basic for this.
1398 2439
1399 Add some new daemon stop and pid detection stuff to /sbin/functions.sh. 2440 Add some new daemon stop and pid detection stuff to /sbin/functions.sh.
1400 Nothing official, but I spent enouth time on it not to want to loose it :) 2441 Nothing official, but I spent enough time on it not to want to loose it :)
1401 2442
1402 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs 2443 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs
1403 to give output to stderr. This was caused by a call to "stty", which when 2444 to give output to stderr. This was caused by a call to "stty", which when
1404 run without a attatched terminal, have this effect. Basically just pipe 2445 run without a attatched terminal, have this effect. Basically just pipe
1405 stderr to /dev/null. 2446 stderr to /dev/null.

Legend:
Removed from v.1.324  
changed lines
  Added in v.1.512

  ViewVC Help
Powered by ViewVC 1.1.20