/[gentoo-src]/rc-scripts/ChangeLog
Gentoo

Diff of /rc-scripts/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.324 Revision 1.513
1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts 1# ChangeLog for Gentoo System Intialization ("rc") scripts
2# Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL 2# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPLv2
3# Written by Daniel Robbins (drobbins@gentoo.org) 3
4 26 Nov 2004; Roy Marples <uberlord@gentoo.org>:
5
6 Fixed up address detection in apipa
7 net.lo now checks for duplicate static IPv4 addresses before assigning
8 iwconfig now supports preassociate and postassociate user hooks
9 net.example - changed $1 to ${IFACE} in examples
10 clarified lack of linux-wlan-ng support
11
12 24 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
13
14 Allow users to specify charset option to dumpkeys when using unicode
15 in conf.d/keymaps #72225. Also move all the init.d/keymap specific
16 options out of rc.conf and into conf.d/keymaps and add some config
17 checks to init.d/keymaps like the clock/hostname init.d scripts.
18
19 Make sure /etc/rc.conf overrides conf.d files when starting up
20 critical services. Should help out with transition from rc.conf.
21
22 24 Nov 2004; Roy Marples <uberlord@gentoo.org>:
23
24 Ensure all net-scripts modules depend on interface_variable function
25 where applicable
26 Fixed adsl stopping - #68934. Thanks to Andreas Kauer
27
28 23 Nov 2004; Roy Marples <uberlord@gentoo.org>:
29
30 iproute2 does not need to create dummy interfaces for aliases
31 unlike ifconfig so we no longer do this
32 We now bring down all aliases and addresses properly
33 Split off some functions from net.lo into helpers.d/functions
34 so that our DHCP helper scripts can use them too :)
35 Deprecated interface specific setup in favour of a generic config
36 macchanger brings interface up now - fixes #71929
37 DHCP over VLAN now works - fixes #71860
38 Disabled modified function checking as it's far too expensive on CPU
39 and still isn't 100% reliable
40 When specifing a module that isn't emerged, you now get an error
41 telling you what to emerge
42 Removed -p option from the diff call used for function removal
43 Removed rp_filter setting - fixes first part of bug #71971
44 Added sysctl.conf settings relating to rp_filter to sysctl.conf
45 - fixes last part of bug #71971
46 Fixed pump exporing ntp servers
47 implemented MODULES_DIR so we can change directory we load from on the fly
48 fixed variables for vlans in most modules
49
50 19 Nov 2004; Aron Grffis <agriffis@gentoo.org>:
51
52 Remove crap "ll" and "d" aliases from skel .bashrc
53
54 19 Nov 2004; Roy Marples <uberlord@gentoo.org>:
55
56 tests for hostname (none) when sending hostname via dhcpcd, udhpc or pump
57 udhcpc now does correct signal handling so we can release leases and
58 terminate cleanly
59 Improved pump process detection
60 Rewrote udhcpc helper scripts around udhcpc and wrapped dhclient to udhcpc
61 scripts. This makes things much saner as udhcpc is much saner - also fixed
62 essidnet and ipv6 local link for them.
63 removed iproute2 udhcpc reliance on the "bc" command
64
65 17 Nov 2004; Roy Marples <uberlord@gentoo.org>:
66
67 Fixed invalid variable handling in bonding and vlan - bug #71419
68 apipa now brings the interface up before testing if address exists
69 Updated bonding documentation - bug #71419
70 Fixed iproute2 adding addresses for vlans - bug #71419
71 ifconfig handle inet6 routing automatically - bug #33310
72 ifconfig - fixed old gateway + gateway in routes conflict
73 iproute2 cleaned up some functions
74
75 16 Nov 2004; Roy Marples <uberlord@gentoo.org>:
76
77 We no longer default a fallback to APIPA when no config is given
78 net.example fleshed out a bit more for dhcpcd - fixes #60845
79 Improved forced module handling a touch
80 modules_sort and modules_check_user in net.lo buffer _provides,
81 _before and _after in arrays to avoid shelling out
82
83 15 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
84
85 Add a check to clock init.d to make sure users dont try to set
86 config their clock in rc.conf anymore.
87
88 Redo hostname/domainname scripts to use files in /etc/conf.d/
89 instead of creating files in /etc/. Allows for controlling things
90 like the behavior of setting the 'domain' in resolv.conf since users
91 may not always understand exactly what's going on.
92
93 Stop referring to conf.d/basic as a global rc config option. That
94 file hasn't been used in a long time and has since been replaced
95 with env.d/00basic. Updated sbin/runscript.sh, etc/profile,
96 sbin/rc-help.sh, and src/awk/cachedepends.awk.
97
98 Run `find | xargs` instead of `find -exec`. Much better performance
99 this way, and busybox friendly #59732.
100
101 15 Nov 2004; Roy Marples <uberlord@gentoo.org>:
102
103 Split modules_load into smaller more managable functions in net.lo
104 Added modules_force option to net.lo with a big phat warning in
105 net.example about it potentially breaking networking
106 Added searchdomains_ESSID option to essidnet
107 Stopped the domain setting from putting the same entry in search
108 in config-system and essidnet
109 Removed second warning in net.lo when configuration not set
110 Documented APIPA module in net.example
111 Added kernel checking for vlan - fixes #70829
112 Added kernel checking for bonding, bridging and tuntap
113 Added iproute2 support to the APIPA module
114
115 13 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
116
117 Update the svcdir mounting #69595. Instead of mounting in /mnt
118 and then bind mounting to $svcdir, we mount the ramdisk on $svcidr.
119
120 12 Nov 2004; Roy Marples <uberlord@gentoo.org>:
121
122 Added arping duplicate address detection to net.lo
123 Created Automatic Private IP Addressing (APIPA) module
124
125 Added dependancy checking to ipppd
126 Bonding is now started pre instead of post
127 Fixed iface variable in dhcp modules for vlans
128 Changed get_device to interface_device
129 Changed get_type to interface_type
130 Added vlan configuration options and documented them in net.example
131 Fixed bridge configuration handling
132 Removed _get_vlans from iproute2 and ifconfig as vlan now does it itself
133
134 11 Nov 2004; Roy Marples <uberlord@gentoo.org>:
135
136 Fixed category of rp-pppoe to net-dialup error when requesting ADSL
137 Improved inet6 address deletion and detection in iproute2
138 Improved gateway logic in ifconfig
139 Changed all wireless reporting functions to use iwgetid instead of
140 parsing iwconfig output except for essid
141
142* rc-scripts 1.6.6 (08 Nov 2004)
143
144 08 Nov 2004; Roy Marples <uberlord@gentoo.org>:
145
146 Added options to configure bridge
147 Added bridge configuration example to net.example
148 Added missing required function interface_exists to iptunnel check_depends
149
150 07 Nov 2004; Aron Griffis <agriffis@gentoo.org>:
151
152 Fix shell scripting errors that would result in
153 /sbin/functions.sh: line 166: [: too many arguments.
154
155 05 Nov 2004; Roy Marples <uberlord@gentoo.org>:
156
157 net-scripts/net.modules.d/bridge
158 - fixed destroying a bridge if no ports were added
159 - starts interfaces if they don't exist - fixed bug #65153
160
161 net-scrips/net.modules.d/bonding
162 - starts interfaces if they don't exist
163
164 net-scripts/init.d/net.lo
165 - added net_start() function to start depandant ifaces
166 so that bridge br0 can active tun0 which net.tun0 has to create
167 - added use dependany on wlan incase we're using linux-wlan-ng drivers
168 fixes bug #64978
169 - moved start() to run_start() and stop() to run_stop()
170 created run() and new start()/stop() functions
171 this is so that we have one single entry point to localise variables
172 and to remove any added functions loaded by our modules
173 - removed redundant interface_exists() as it's provided by
174 ifconfig and/or iproute2
175
176 net-scripts/net.modules.d/ifconfig and iproute2
177 - added ifconfig_tunnel and iproute2_tunnel functions
178
179 addred gre/ipip tunnel support via the the tunnel module
180 - fixes bug #50765
181
182 04 Nov 2004; Roy Marples <uberlord@gentoo.org>:
183
184 net-scripts/net.modules.d/pump
185 - fixed setting ntp servers
186
187 net-scripts/net.modules.d/dhcpcd
188 - fixed stopping function
189
190 net-scripts/net.modules.d/bonding
191 - fixed module to actually work with the interface
192
193 net-scripts/init.d/net.lo
194 - we remove all added functions when restarting an interface
195 this relies on the diff command being available
196
197 added isdn support via the new ipppd module - fixes bug #69035
198
199 net-scripts/conf.d/net.example
200 - added sample isdn setup
201
202 net-scripts/conf.d/wireless.example
203 - added better descriptions to the _sleep variables
204
205 Fixed boolean logic error when testing is_net_up in /sbin/runscript.sh
206 - fixed bug #70022
207
208 net.lo - added get_type function to return the type of the interface
209 - eth, ippp, etc
210
211 ipppd, tuntap
212 - start() moved to pre_start() and we now test by type
213 this means you no longer need ifconfig_ippp0=( "isdn" "dhcp" )
214 as ippp0 is always an isdn device
215
216 bridge - fixed stop function and moved start() to pre_start()
217 and automatically start if the variable bridge_${iface} exists
218
219 net.example - fixed up documentation for changed behaviour above
220
221 03 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
222
223 When launching critical services in /sbin/rc, make sure we source
224 the conf.d file (if it exists). Resolves #69956.
225
226 03 Nov 2004; Roy Marples <uberlord@gentoo.org>:
227
228 net-scripts/init.d/net.lo
229 - fixed !module when it's not installed
230 - we can now specify null inet addresses in the config
231 this allows a pure inet6 setup
232 - shutdown lo the same way we bring it up
233
234 net-scripts/net.modules.d/ifconfig
235 - changed IPv6 to inet6 in output of adding inet6 addresses
236 - just output inet6 address removed, not eth0 del foo
237
238 net-scripts/net.modules.d/iproute2
239 - fix deletion of non-link addresses - fixes bug #65417 (again)
240 - handle inet6 addresses like ifconfig - fixes more bug #65417
241
242 net-scripts/conf.d/net.example
243 - noted that inet6 addresses do not create aliases
244 - added examples of assigning inet6 addresses
245
246 net-scripts/net.modules.d/iwconfig
247 - improve error message when card does not support scanning
248
249 net-scripts/conf.d/wireless.example
250 - fixed comment regarding preferred_aps not working with cards that don't
251 support scanning
252
253 02 Nov 2004; Roy Marples <uberlord@gentoo.org>:
254
255 net-scripts/conf.d/net.example
256 - added bridging and tuntap examples
257
258 net-scripts/init.d/net.lo
259 - modprobe ${IFACE} when ${IFACE} does not exist
260
261 net-scripts/net.modules.d/ifconfig
262 - fixed interface existance check
263
264 net-scripts/net.modules.d
265 ifconfig & iproute2
266 - added boolean to interface_exists to report if it exists or not
267 - added checks to see if the interface exists or not when starting
268
269 dhcpcd
270 - removed debug line
271
272 bonding, dhclient, dhcpcd, essidnet, macchanger, pump, udhcpc
273 - added checks to see if the interface exists or not when starting
274
275 tuntap
276 - added checks to see if the interface exists or not when stopping
277
278 01 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
279
280 Dump the error message that hwclock returns since it tends to be
281 quite useful. Modified init.d/clock.
282
283 Fix error in functions.sh [ -z "$@" ] -> [[ -z "$@" ]] #69789.
284
285 Don't create /dev/sndstat link anymore in populate_udev per #69635.
286
287 01 Nov 2004; Roy Marples <uberlord@gentoo.org>:
288
289 net-scripts/init.d/net.lo:
290 - modules specified by interface config now error if they are not loaded
291 - moved interface check to after preup incase user preup loads drivers
292 - modules can be explicitly not used by prefixing them with a !
293 however, they are still available to other modules
294 fixes bugs #68908, #69027
295 - remove check to see if interface exists
296 - modules may setup new interfaces and still require config
297 so we have a new label counter in iface_start
298 - removed the check to see if a class wrapping already exists
299 this fixes the bug where ifconfig and iproute2 are installed, but
300 ifconfig is asked for and the interface is restarted.
301 - added check to see if the configured module is loaded
302 and installed or not in iface_start
303 - add dependancy on isdn4linux - fixes bug #69035
304 - interface_exists moved to iproute and ifconfig
305
306 net-scripts/net.modules.d
307 - Split wireless module into iwconfig and essidnet modules
308 - Added tuntap and bridge modules, fixes bug #55394, #30688
309
310 net-scripts/init.d/iwconfig:
311 - wep mode is now reported
312 - removed post_stop function so we keep existing config
313 - added pre_stop to set the ESSID variable
314 - changed to veinfo/vewarn where appropriate
315 - check if interface exists otherwise abort gracefully
316 - no longer deletes addresses as we now avoid
317 ipv6 local addresses in detecting if interface has an addresses or not
318
319 net-scripts/init.d/ifconfig:
320 - added flag enable/disable function
321 - scope:link inet6 addresses are ignored when testing is_up and
322 del_addresses - fixes bug #65417
323
324 net-scripts/init.d/iproute2:
325 - added flag enable/disable function
326 - scope:link inet6 addresses are ignored when testing is_up and
327 del_addresses - fixes bug #65417
328
329 net-scripts/init.d/macchanger:
330 - fixed detecting whether the change worked or not, fixes bug #68893
331
332 net-scripts/init.d/vlan:
333 - fixed old config problem
334
335 31 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
336
337 Do not delete depscan and envupdate caches on reboot, as this should
338 improve bootup times - works nicely with the '-u' parameters of both.
339 Also move the '-u' parameter test of depscan.sh after the directory
340 exist test, else ${svcdir}/started/, etc do not exist. Modified both
341 /sbin/rc and /sbin/depscan.sh for this.
342
343 Move things around in /sbin/functions.sh to have all functions above.
344
345 Add the 'lo' option to RC_NET_STRICT_CHECKING to resolve bug #29225.
346
347 28 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
348
349 Only add files not managed by udev to device tarball, bug #57110.
350
351 28 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
352
353 Revert pam_console_apply udev check in bootmisc/halt.sh since
354 the bug is with pam_console_apply and not udev/pam.
355
356 Use ${EUID} instead of $(id -u) to help out BSD in runscript.sh.
357
358 Allow users to select ramfs instead of default tmpfs for mounting
359 on /dev with udev #69091.
360
361 Add issue.devfix which would be auto copied to /etc/issue if
362 /sbin/rc detects the user is missing /dev/null or /dev/console.
363 Includes a simple explanation/fix for what's wrong.
364
365 Make sure the clock init script runs after checkroot/modules/localmount
366 so that timestamps are synchronized asap #68133 / #70008.
367
368 Accept '-nc' as a short option to '--nocolor' #64736.
369
370 26 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
371
372 Don't use -A with fsck to respect the fs_passno since it'll try
373 to fsck all filesystems, not just the ones specified. Instead,
374 awk /etc/fstab to review the passno field in checkroot #68822.
375
376 Add support for 'gentoo=forcefsck' boot option in checkroot.
377
378 Make sure we run devfsd in /sbin/rc even when /dev has been
379 automounted by the kernel #68795.
380
381 Don't generate the device tarball in halt.sh with livecds #68469.
382
383 25 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
384
385 net-scripts/net.modules.d/ifconfig:
386 - Simplify ifconfig_is_up()
387 - Fix ifconfig_get_aliases_rev() to actually work... you can't
388 specify an interface name to ifconfig if you want to see the
389 aliases.
390 - Workaround a couple ifconfig bugs dealing with aliases
391 - Correct a return status in ifconfig_interface_del_addresses()
392 - ifconfig_iface_stop() is bool, not void; fix the comments
393
394 net-scripts/net.modules.d/iproute2:
395 - iproute2_iface_stop() is bool, not void. Fix the code so it
396 returns meaningful values
397
398 net-scripts/init.d/net.lo:
399 - Fix preferred (ifconfig/dhcpcd) module loading so it doesn't
400 barf when a preferred module is either (1) missing from
401 net.modules.d or (2) not available due to missing dependencies
402 - When loading all modules in order to stop an interface, only use
403 the first available to satisfy each class wrapper
404
405 24 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
406
407 Include livecd patch that was applied to baselayout-1.9.4-r6
408 to use agetty instead of mingetty
409
410 24 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
411
412 Mount tmpfs instead of ramfs on /dev when using udev systems.
413 The problem with ramfs is that it has no size limitations so
414 one could easily take down their machine by accident #68653.
415
416* rc-scripts 1.6.3 (23 Oct 2004)
417
418 22 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
419
420 Add support for user_eth0 in the adsl module and in net.example.
421 This means that most users won't need to edit pppoe.conf at all
422
423 21 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
424
425 Remove old etc/conf.d/net and try to clarify instructions in
426 net-scripts/conf.d/net.example. Add example for ADSL
427
428 21 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
429
430 Merge all of the UML checks into one function, is_uml_sys(),
431 which is now in functions.sh.
432
433 18 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
434
435 Add v-e-commands (veinfo, vbegin, etc) to sbin/functions.sh that
436 depend on RC_VERBOSE which defaults to no. Add --verbose to args
437 understood by runscript.sh.
438
439 In net.lo, use veinfo and friends when loading modules since this
440 information is confusing to users.
441
442 In net.lo, always load global "modules" setting in following
443 "modules_iface" since this is a little easier for users to
444 understand.
445
446 In net.lo, use eindent for output of pre/post scripts
447
448 18 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
449
450 Add shfs to our list of net filesystems #61452. Also add afs/nfs4.
451
452 Add a '-u' parameter to depscan.sh to allow for updates only when
453 the config files have changed. With /sbin/rc using this, we speed
454 up bootup by only regenerating the cache when need be #67976. Also
455 add a '-u' parameter to env-update.sh for same reasons.
456
457 Don't run depscan.sh in rc-update anymore since the cache files don't
458 depend on runlevels (which is all that rc-update modifies).
459
460 Add unicode support to keymaps/consolefont #32111 and UML support #29707.
461
462 Add checks to many filesystem operations in the eventuality that the
463 filesystems are mounted read only.
464
465 16 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
466
467 Update the default fstab /dev/shm mount to include the nodev, nosuid,
468 and noexec mount flags. No reason for the filesystem to have those.
469
470 Cleaned up the clock init script. Moved the clock options out of
471 rc.conf and into its own conf.d/clock file. Added support for the
472 weird Alpha consoles SRM/ARC since they need special config options.
473 Also made the syncing of system clock to hardware clock at shutdown
474 optional (with the default being off) #15834. Don't try to set the
475 clock if running inside a coLinux environment #52870.
476
477 Update default PATH ordering to try to follow default behavior in
478 other distro's and because it's logical that /usr/local should
479 override /usr which should override /. Fixes #12531.
480
481 Move devfs stuff out of baselayout and into the devfsd package.
482
483 Don't run /sbin/pam_console_apply -r if using udev on /dev #50315.
484
485 14 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
486
487 Fix rc-status to work with new COLS code.
488
489 14 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
490
491 Allow users to mount ramfs/tmpfs/ramdisk as their svcdir and
492 stop assuming ramfs==ramdisk #64079.
493
494 13 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
495
496 Rework the code for managing /dev to make it more flexible for
497 users. Some don't want to use devfs/udev but rather just create
498 their own nodes. Handles some issues with #44906 / #67276.
499
500 Move the utmp clearing code out of bootmisc and into /sbin/rc.
501 The utmp log must be cleared while in the initial boot level
502 (meaning inside /sbin/rc) because as soon as rc exists, init
503 writes a 'boot' record (`who -b`) which would normally be lost
504 when the bootmisc init.d script is run #61727.
505
506 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
507
508 Cosmetic fixes for starting loopback interface
509
510 SpanKY doesn't like the dots... disable them by default, but you
511 can set RC_DOT_PATTERN=' .' in /etc/conf.d/rc to get them back
512
513* rc-scripts 1.6.2 (13 Oct 2004)
514
515 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
516
517 Install net.modules.d to /lib/rcscripts instead of /etc so we
518 don't have to deal with CONFIG_PROTECT
519
520 Fix diff code in modules_load so it can identify which functions
521 have been modified
522
523 Fix fallback mechanism in iface_start so that it works correctly
524 and doesn't report a bogus error message when trying the fallback
525
526 Get rid of need_begin trickery in iface_stop
527
528 Simplify eend processing in dhcp modules
529
530 Implement eindent, eoutdent, esetdent in functions.sh and adjust
531 net-scripts to use them.
532
533 Re-write einfo, ewarn, eerror, ebegin, eend, ewend to use
534 RC_INDENTATION and to work better on serial terminals
535
536 Remove conf.d/net.ppp0 since that is provided by net-dialup/ppp
537
538 12 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
539
540 Fix ipaddr_fallback in net-scripts/conf.d/net.example
541
542 09 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
543
544 Remove init.d/net.eth0 net.lo and net.ppp0. The first two are
545 provided now by net-scripts and net.ppp0 is shipped in
546 net-dialup/ppp
547
548 Create NET_FS_LIST and is_net_fs in functions.sh and use them in
549 checkroot, localmount, netmount, net.example, and net.lo
550
551 09 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
552
553 If the hostname has already been set via the kernel/dhcp, don't
554 force it to 'localhost'. Used in netboot/terminal setups #38172.
555
556 Add domainname to default boot runlevel list #47041.
557
558 08 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
559
560 Make sure that when we try to mount /sys, we do so with -n (tigger).
561
562 Add some examples for nfs to sysctl.conf #66575.
563
564 06 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
565
566 Update to net-scripts 1.0.2 from Roy
567 ------------------------------------
568 - wireless module: replaced preferred_only var with
569 associate_order this makes more sense now as we have changed the
570 possible values
571 - wireless module: added patch from Daniel Zappala we should call
572 wireless_get_essid everywhere now
573 - wireless module: don't declare ESSID local in
574 wireless_configure(). This allows ESSID to be tested in the
575 user defined postup() function
576 - wireless module: test type != "NOT READY!" instead of testing =
577 IEEE. this resolves problems with intel and ra-tech drivers
578 - net.lo start() now errors when the interface does not exist
579 - dhcpcd, dhclient, udhcpc and pump now expose peer_* vars this
580 enables wireless to map them from peer_dns_ESSID
581 - config-system helper now loads wireless module to remap
582 variables from ESSID this allows udhcpc and dhclient to use
583 remapped wireless vars
584 - fixed dhcpcd and pump modules using peer_* vars
585 - wireless aborts after 5 seconds if it cannot report a valid
586 ESSID this fixes a potential infinite loop problem
587 - wireless_setup_iface() renamed to wireless_map_essid_vars() this
588 avoids confusion about what the function actually does
589
590 06 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
591
592 Change the default net.ipv4.conf.default.rp_filter setting to 1
593 in sysctl.conf since it shouldn't be harmful in anyway. Redhat
594 does the same.
595
596 05 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
597
598 Get rid of getcols() in sbin/functions.sh. Use COLUMNS when
599 possible and otherwise clean up the COLS code. Fix the "emerge
600 depend" detection code to use RC_ENDCOL="no"
601
602 05 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
603
604 Changed behavior of the domainname init.d script. It will now
605 override any settings obtained via dhcp/whatever. See #48277.
606
607 Updated bootmisc to dump the output of `dmesg` to /var/log/dmesg.
608 This way users have an 'after-boot' log of their dmesg saved
609 somewhere useful #55421.
610
611 Added the 'eend' back to depscan.sh since the script starts with a
612 call to 'ebegin' #59694.
613
614 Add selinux update from Chris PeBenito for src/runscript.c #64019.
615
616 Add more quoting to rc-help.sh to fix some non-critical errors.
617 Make rc-help.sh respect the value of RC_NOCOLOR. Allow RC_NOCOLOR
618 in functions.sh to be set via the environment.
619
620 Flesh out the default sysctl.conf with comments and more examples
621 since our previous one was pretty sparse #59993.
622
623 Change calls to `uniq` to `sort -u` in checkroot/halt.sh. This way
624 we only require sort in / and not both #36453.
625
626 04 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
627
628 More (I mean a LOT more) services. This takes care of #44458,
629 #52881 #55939 #58997 #66166 #66297. Gleaned many from the IANA
630 list/Fedora/FreeBSD/Debian.
631
632 Change the test for /proc/cmdline from -e to -r. On grsecurity
633 based systems for example, the file may exist, but not be readable
634 by non-root users (patch by Ned Ludd).
635
636 03 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
637
638 Add support for NFSv4 from #25106 to the netmount script. Don't
639 try to fsck / if the root is a remote filesystem (like NFS) #36624.
640
641 Update the fs_passno values in the default fstab to match the
642 settings suggested by the manpage #37314. Make checkroot respect
643 a fs_passno setting of 0 when dealing with / #39212. Change
644 default / filesystem type to ext3 instead of xfs #42670.
645
646 Re-order the arguments to mount to match POSIX requirements #66225.
647
648 Don't pipe swapon in localmount to /dev/null and ignore return
649 codes anymore. A swapon that works shows no output #39834.
650
651 02 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
652
653 Break up the COL/COLOR code properly this time. Not all serial
654 consoles can handle adjusting to the end of the line, so let's not
655 bother running stty at all anymore. This should fix up #32453.
656
657 30 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
658
659 Disable cryptfs by default in the conf.d file. Also cleanup
660 the output generated in localmount/checkfs/halt.sh for dm-crypt.
661 Add an extra check so that cryptfs is only run when the conf.d
662 file exists as well as /bin/cryptsetup.
663
664 29 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
665
666 Let glibc install nscd since different versions of glibc will
667 need to be handled differently. See #43076 by Rui Malheiro.
668
669 29 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
670
671 Prefer ~/.dir_colors over /etc/DIR_COLORS when it exists #64489
672
673 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
674
675 Clear the screen in .bash_logout #32330
676
677* rc-scripts 1.6.1 (27 Sep 2004)
678
679 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
680
681 Update dm-crypt to work with multi-line configuration files.
682 Also don't set status in a subshell; it was being lost before.
683
684 23 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
685
686 Rework the logic behind the $COLS code. It should not depend
687 on whether color is enabled. Also add a check for negative
688 values (like when using a serial console).
689
690* rc-scripts 1.6.0 (15 Sep 2004)
691
692 15 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
693
694 Fix bug 64034: simplify netmount script's stop function so that
695 mountpoints containing spaces work correctly
696
697 Update tarball.sh to use net-scripts
698
699 14 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
700
701 Commit dm-crypt enablement patch from Tigger (Rob Holland) in
702 bug 43146
703
704* rc-scripts 1.5.3 (18 Aug 2004)
705
706 18 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
707
708 Fix bug 60719 (request for better error messages from runscript)
709 by allowing errors to show on the screen when they're encountered
710 in wrap_rcscript
711
712 Apply Spock's bootsplash patch from bug 45784. This moves most of
713 the splash functionality out of baselayout.
714
715 13 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
716
717 Don't export PS1. Continuation of bug 26951, comments 60-62.
718
719* rc-scripts 1.5.2 (02 Aug 2004)
720
721 02 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
722
723 Related to bug 38955, don't set INPUTRC. Instead patch bash so
724 that it looks for /etc/inputrc automatically if ~/.inputrc is
725 missing. This is better than using INPUTRC since that will
726 override even after the user creates ~/.inputrc.
727
728 Fix bug 54275: Don't set INFODIR. The correct variable used by
729 texinfo is INFOPATH, which is already set in 00basic. Setting
730 INFODIR is useless, and breaks a NetBSD cross compile from Gentoo
731
732 01 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
733
734 Fix bug 58805: net.eth0 should use bridge so that bridge
735 interfaces are configured prior to net.br0 running
736
737 Fix bug 56856: Get rid of net.rej and integrate missing stuff to
738 conf.d/net
739
740 Apply half of spock's patch in bug 45784: Check for
741 conf.d/bootsplash instead of conf.d/bootsplash.conf
742
743 Fix bug 51351: Quote parsed output of /proc/filesystems to handle
744 octal sequences in mountpoint such as encoded spaces (\040)
745
746 Fix bug 46680: Add cifs support to localmount and netmount.
747 Thanks to Ronald Moesbergen for the patches
748
749 21 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
750
751 Fix bug 26952: Use /etc/bash/bashrc to setup PS1, testing $- to
752 determine if shell is interactive. The new system-wide bashrc is
753 installed by bash-2.05b-r10
754
755 19 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
756
757 Fix bug 38743: strip leading and trailing spaces from variable
758 values in genenviron.awk. Thanks to Marius Mauch for the patch.
759
760 09 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
761
762 Fix bug 55576: swap words "start" and "stop" in runscript.sh error
763 message
764
765* rc-scripts 1.5.1 (28 Jun 2004)
766
767 28 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
768
769 Fix dhcp in iface_start_ifconfig: It was re-using the variable
770 ${i} which would result in the following error:
771 /sbin/runscript.sh: line 441: ((: 16.141.88.153: syntax error
772 in expression (error token is ".141.88.153")
773
774 Use vlan_IFACE instead of iface_IFACE_vlans in net.eth0 for more
775 consistent vlan configuration. Thanks to robbat2 in bug 55394
776 (not fully resolved)
777
778 Add example for checking if root filesystem is NFS-mounted via
779 predown function in conf.d/net for bug 53104. This might be
780 better integrated at some point into net.eth0
781
782* rc-scripts 1.5.0 (26 Jun 2004)
783
784 26 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
785
786 Fix bug 47659: support iproute2-style configuration. Thanks to
787 Dean Bailey for some fantastic patches, including documentation
788 for conf.d/net. This is a pretty huge re-write of net.eth0
789
790 Fix bug 34607: provide examples for in conf.d/net for preup,
791 postup, predown, postdown functions. Also pay attention to return
792 value from predown function (previously ignored)
793
794 15 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
795
796 Fix bug 25975: support adsl in net.eth0. Thanks to Patrick McLean
797 for the initial pass at the code.
798
799 Fix bug 34140: add --servicelist option to rc-status. Thanks to
800 Eldad Zack for the patch.
801
802 Fix bug 37418: fix order of LVM and RAID in checkfs. Thanks to
803 Raimondo Giammanco for the patch.
804
805* rc-scripts 1.4.16 (06 Jun 2004)
806
807 06 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
808
809 Only call generate-modprobe.conf with --assume-kernel if
810 modules-update was called with --assume-kernel. This means that
811 only catalyst has the dependency on module-init-tools, not
812 everybody with the newer baselayout
813
814* rc-scripts 1.4.15 (21 May 2004)
815
816 21 May 2004; Aron Grifis <agriffis@gentoo.org>:
817
818 Fix bug 51570: typo on line 161 of /sbin/livecd-functions.sh
819
820 Fix bug 51626: wrong variable declaration at top of
821 get_bootparam() in /sbin/functions.sh
822
823* rc-scripts 1.4.14 (17 May 2004)
824
825 17 May 2004; Aron Griffis <agriffis@gentoo.org>:
826
827 Bump version to 1.4.14 to push out gmsoft's fix for hppa console
828 on ttyB0
829
830* rc-scripts 1.4.13 (15 May 2004)
831
832 15 May 2004; Aron Griffis <agriffis@gentoo.org>:
833
834 Bump version to 1.4.13 to push out Gustavo's livecd serial console
835 fixes for sparc and hppa.
836
837* rc-scripts 1.4.12 (07 May 2004)
838
839 10 May 2004; Aron Griffis <agriffis@gentoo.org>:
840
841 Bump version to 1.4.12 to release these critical bug fixes
842
843 Fix bug 50434: The new version of start-stop-daemon changes
844 directory to / by default unless --chdir is specified. Revert
845 this behavior to maintain working directory. This fixes openvpn
846 startup (probably among other things). Thanks to Sven Wegener for
847 the patch.
848
849 Fix bug 50448: Four days ago I changed bash loops to use the wrong
850 conditional syntax in net.eth0. Thanks to Sven Wegener for
851 pointing out the problem and providing a patch.
852
853* rc-scripts 1.4.11 (07 May 2004)
854
855 07 May 2004; Aron Griffis <agriffis@gentoo.org>:
856
857 Fix bug 20597: Skip RCS files when updating modules
858
859 Fix bug 49926: Add a --assume-kernel flag to modules-update. This
860 requires a companion patch in module-init-tools-3.0-r2 to handle
861 the same flag in generate-modprobe.conf; this dependency won't be
862 handled in the baselayout ebuild since it only affects livecd
863 building.
864
865 06 May 2004; Aron Griffis <agriffis@gentoo.org>:
866
867 In net.eth0, fix many instances of loops like "for ((i = 0; i <
868 100; i = i + 1))". The problem here is that the middle comparison
869 is being interpreted as a bash conditional, which means that it's
870 doing string comparison by default. It needs to be "i -lt 100"
871
872 Fix bug 34827: net.eth0 breaks when localized because the ifconfig
873 output changes. Wrap ifconfig in a function that overrides
874 LC_ALL=C
875
876 Fix bug 48305: Provide a new network configuration variable
877 ifconfig_fallback_eth0 which allows one to specify a fallback
878 configuration in case DHCP fails.
879
880 Fix bug 50246: Give root an invalid password ("*" in /etc/shadow)
881 in the default baselayout. This prevents the first reboot after
882 installation from having a blank password.
883
884 05 May 2004; Aron Griffis <agriffis@gentoo.org>:
885
886 Fix bug 48595: Make sure $(id -u) is zero (root user) when running
887 init scripts to avoid a lot of error messages.
888
889 Replace many lines of awk with two lines of grep in
890 init.d/localmount
891
892 Fix bug 44316: Use 0644 instead of 0640 for resolv.conf in net.ppp0
893
894 03 May 2004; Aron Griffis <agriffis@gentoo.org>:
895
896 Update to version 1.10.20 of Debian's start-stop-daemon (contained
897 in dpkg at http://packages.debian.org/testing/base/dpkg). This
898 fixes bug 22686 (start-stop-daemon in baselayout doesn't allow
899 altered nicelevel).
900
901* rc-scripts 1.4.10 (25 Apr 2004)
902
903 25 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
904
905 Fix typos in sbin/rc: "try try mount" and "mount ... & >/dev/null"
906 Also removed the errstr double-checking since the need for that is
907 alleviated by these typo fixes.
908
909 23 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
910
911 Fix bug 48629 (/sbin/rc fixups for udev) with patch from GregKH
912
913 Fix bug 40987 (gentoo should be able to boot with an empty /dev)
914 with patch from Spanky. The patch avoids redirection to /dev/null
915 when it doesn't exist; this was breaking /sbin/rc.
916
917* rc-scripts 1.4.9 (15 Apr 2004)
918
919 15 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
920
921 Fix bug 47111 (severe depcache problems) with tons of help from
922 dswhite42 and the rest of the crew in that bug. Thanks guys!
923
924* rc-scripts 1.4.8 (14 Apr 2004)
925
926 14 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
927
928 Fix bug 47623 (error removing inet6 addresses) with patch provided
929 by Vlad Yasevich.
930
931* rc-scripts 1.4.7 (12 Apr 2004)
932
933 12 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
934
935 Fix bug 47218 (net.eth0 broken for vlans) with patch provided by
936 Andy Dustman. Fix bug 47250 (depscan.sh fails to create
937 /var/lib/init.d/* directories) with patch from Terje Bergström.
938
939* rc-scripts 1.4.6 (08 Apr 2004)
940
941 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
942
943 Update patch from Gustavoz; -ln /bin/bash should have been -nl /bin/bash
944
945* rc-scripts 1.4.5 (08 Apr 2004)
946
947 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
948
949 Patch init.d/checkroot to list / (root) only once in mtab; see bug 38360.
950 Patch from Gustavoz to livecd-functions.sh to run bash instead of login on
951 serial consoles, necessary due to scrambled root passwords.
952
953* rc-scripts 1.4.4 (07 Apr 2004)
954
955 07 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
956
957 Patch from Gustavoz for Sparc console: Fetch LIVECD_CONSOLE from dmesg
958 output. Also support 4800 baud correctly.
959
960 16 Mar 2004; Aron Griffis <agriffis@gentoo.org>:
961
962 The changes in this commit pertain primarily to
963 http://bugs.gentoo.org/show_bug.cgi?id=19695
964 http://bugs.gentoo.org/show_bug.cgi?id=35736
965
966 Specify routes as an array per interface, for example:
967 routes_eth0=(
968 "-net 10.1.0.0 netmask 255.255.0.0 gw 10.0.0.5"
969 "-net 10.2.0.0 netmask 255.255.0.0 gw 10.0.0.6"
970 "-host 10.3.0.1 dev eth0"
971 )
972
973 You can optionally use the gateway variable or just put the default route
974 in the routes variable. The following two are REDUNDANT:
975
976 routes_eth0=( "default gw 10.0.0.5" )
977 gateway="eth0/10.0.0.5"
978
979 Old configuration variables in /etc/conf.d/net are fully supported and
980 used transparently if ifconfig_eth0 is missing. In other words, this new
981 script is fully backward-compatible. However you can get rid of
982 iface_eth0, alias_eth0, broadcast_eth0 and netmask_eth0 if you want by
983 using the new syntax:
984
985 ifconfig_eth0=(
986 "10.0.0.6 broadcast 10.0.255.255 netmask 255.255.0.0"
987 "192.168.1.1 netmask 255.255.255.0"
988 "123.456.789.1"
989 )
990
991 Full backward compatibility so no danger to screwing up users relying on
992 existing /etc/conf.d/net setup
993
994 NET_DEBUG can be set in the environment for copious debugging output
995
996 Deprecate [ ] in favor of [[ ]] which has fewer quoting issues and
997 better functionality (and is even slightly faster)
998
999 Properly localize all variables, including variables returned by
1000 setup_vars
1001
1002 Allow full options for every ifconfig command, both base address and
1003 aliases via ifconfig_eth0, replacing the convoluted and less-functional
1004 iface_eth0, alias_eth0, broadcast_eth0, netmask_eth0
1005
1006 Provide full support for static routes via routes_eth0
1007
1008 Fix potential quoting problems in setup_vars by using better eval syntax
1009 instead of eval echo
1010
1011 Display IP addresses while configuring, both DHCP-retrieved and
1012 statically set addresses
1013
1014 Collapse redundant caching of $? since eend returns $? again
1015
1016 Report when keeping kernel configuration for an interface along with IP
1017 address gleaned
1018
1019 Don't reset the default gateway if it is already set correctly
1020
1021 Don't bind default gateway to particular interface when /sbin/route is
1022 called so that it can survive if there is more than one interface on the
1023 required subnet. (Old behavior can be obtained by setting
1024 routes_eth0="default gw 1.2.3.4 dev eth0" if you really want it)
1025
1026 Don't bomb if default gateway can't be set since that doesn't
1027 necessarily mean that the interface configuration is invalid.
1028 (Old behavior was completely broken, but commented section
1029 demonstrates how to do it right if necessary)
1030
1031 iface_stop no longer relies on configuration in /etc/conf.d/net AT ALL.
1032 This is very good because it means you can put new configuration in
1033 /etc/conf.d/net, then restart the interface and the old configuration will
1034 be properly shut down.
1035
1036 iface_stop reports when it is releasing the DHCP lease
1037
1038* rc-scripts 1.4.3.13p1 (26 Feb 2004)
4 1039
5 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1040 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
6 1041
7 Remove /etc/DIR_COLORS, as coreutils provides it now. 1042 Remove /etc/DIR_COLORS, as coreutils provides it now.
1043
1044 Add RC_DEVICE_TARBALL to /etc/conf.d/rc to control use of device tarball.
1045 Also modified /sbin/rc and /etc/init.d/halt.sh for this.
1046
1047 Start udevd if present.
1048
1049 Small fix to sbin/rc-services.sh related to mtime checking and 'net'
1050 virtual service - it had no mtime generated, so check_mtime() failed
1051 for it ...
8 1052
9 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1053 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
10 1054
11 Update to enable checking of mtimes on rc-scripts, and auto running 1055 Update to enable checking of mtimes on rc-scripts, and auto running
12 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO 1056 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO
1395 2439
1396 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified 2440 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified
1397 /etc/env.d/00basic for this. 2441 /etc/env.d/00basic for this.
1398 2442
1399 Add some new daemon stop and pid detection stuff to /sbin/functions.sh. 2443 Add some new daemon stop and pid detection stuff to /sbin/functions.sh.
1400 Nothing official, but I spent enouth time on it not to want to loose it :) 2444 Nothing official, but I spent enough time on it not to want to loose it :)
1401 2445
1402 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs 2446 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs
1403 to give output to stderr. This was caused by a call to "stty", which when 2447 to give output to stderr. This was caused by a call to "stty", which when
1404 run without a attatched terminal, have this effect. Basically just pipe 2448 run without a attatched terminal, have this effect. Basically just pipe
1405 stderr to /dev/null. 2449 stderr to /dev/null.

Legend:
Removed from v.1.324  
changed lines
  Added in v.1.513

  ViewVC Help
Powered by ViewVC 1.1.20