/[gentoo]/xml/htdocs/doc/en/gentoo-x86-install.xml
Gentoo

Diff of /xml/htdocs/doc/en/gentoo-x86-install.xml

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.47 Revision 1.48
209 </note></p> 209 </note></p>
210 <p>If you are using hardware RAID, you'll need to load the 210 <p>If you are using hardware RAID, you'll need to load the
211 ATA-RAID modules for your RAID controller. 211 ATA-RAID modules for your RAID controller.
212 </p> 212 </p>
213 <pre caption="Loading RAID Modules"> 213 <pre caption="Loading RAID Modules">
214# <c>modprobe ataraid</c> 214# <c>modprobe ataraid</c>
215# <c>modprobe pdcraid</c> 215# <c>modprobe pdcraid</c>
216 <comment>(Promise Raid Controller)</comment> 216 <comment>(Promise Raid Controller)</comment>
217# <c>modprobe hptraid</c> 217# <c>modprobe hptraid</c>
218 <comment>(Highpoint Raid Controller)</comment> 218 <comment>(Highpoint Raid Controller)</comment>
219 </pre> 219 </pre>
220 <p>The Gentoo LiveCD should have enabled DMA on your disks, but if it did not, 220 <p>The Gentoo LiveCD should have enabled DMA on your disks, but if it did not,
221 <c>hdparm</c> can be used to set DMA on your drives. </p> 221 <c>hdparm</c> can be used to set DMA on your drives. </p>
222 <pre caption="Setting DMA"><comment>Replace hdX with your disk device.</comment> 222 <pre caption="Setting DMA"><comment>Replace hdX with your disk device.</comment>
223# hdparm -d 1 /dev/hdX <comment>Enables DMA </comment> 223# hdparm -d 1 /dev/hdX <comment>Enables DMA </comment>
224# hdparm -d1 -A1 -m16 -u1 -a64 <comment>Enables DMA and other safe performance-enhancing options</comment> 224# hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdX <comment>Enables DMA and other safe performance-enhancing options</comment>
225# hdparm -X66 /dev/hdX <comment>Force-enables Ultra-DMA -- dangerous -- may cause some drives to mess up</comment></pre> 225# hdparm -X66 /dev/hdX <comment>Force-enables Ultra-DMA -- dangerous -- may cause some drives to mess up</comment></pre>
226 </body> 226 </body>
227 </section> 227 </section>
228 </chapter> 228 </chapter>
229 <chapter> 229 <chapter>
230 <title>Loading PCMCIA Kernel Modules</title> 230 <title>Loading PCMCIA Kernel Modules</title>
231 <section> 231 <section>
232 <body> 232 <body>
233 <p>If you have a PCMCIA network card, you will need to do some additional 233 <p>If you have a PCMCIA network card, you will need to do some additional
234 trickery. 234 trickery.
235 </p> 235 </p>
236 <warn>To avoid problems with <c>cardmgr</c>, you <e>must</e> run it <e>before</e> you enter the chroot 236 <warn>To avoid problems with <c>cardmgr</c>, you <e>must</e> run it <e>before</e> you enter the chroot
237 portion of the install. </warn> 237 portion of the install. </warn>
238 <pre caption="Loading PCMCIA Modules"> 238 <pre caption="Loading PCMCIA Modules">
239# <i>modprobe pcmcia_core</i> 239# <i>modprobe pcmcia_core</i>

Legend:
Removed from v.1.47  
changed lines
  Added in v.1.48

  ViewVC Help
Powered by ViewVC 1.1.20