/[gentoo]/xml/htdocs/doc/en/gentoo-x86-install.xml
Gentoo

Diff of /xml/htdocs/doc/en/gentoo-x86-install.xml

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.72 Revision 1.73
206 will have to load the appropriate modules manually. 206 will have to load the appropriate modules manually.
207 To view a list of all available network card modules, type <c>ls 207 To view a list of all available network card modules, type <c>ls
208 /lib/modules/*/kernel/drivers/net/*</c>. To load a particular module, 208 /lib/modules/*/kernel/drivers/net/*</c>. To load a particular module,
209 type: 209 type:
210 </p> 210 </p>
211 <pre caption="PCI Modules Configuration"> 211 <pre caption="PCI Modules Configuration">
212# <c>modprobe pcnet32</c> 212# <c>modprobe pcnet32</c>
213<comment>(replace pcnet32 with your NIC module)</comment> 213<comment>(replace pcnet32 with your NIC module)</comment>
214 </pre> 214 </pre>
215 <p>Likewise, if you want to be able to access any SCSI hardware that wasn't detected 215 <p>Likewise, if you want to be able to access any SCSI hardware that wasn't detected
216 during the initial boot autodetection process, you'll need to load the appropriate 216 during the initial boot autodetection process, you'll need to load the appropriate
217 modules from /lib/modules, again using <c>modprobe</c>: 217 modules from /lib/modules, again using <c>modprobe</c>:
218 </p> 218 </p>
219 <pre caption="Loading SCSI Modules"> 219 <pre caption="Loading SCSI Modules">
220# <c>modprobe aic7xxx</c> 220# <c>modprobe aic7xxx</c>
221<comment>(replace aic7xxx with your SCSI adapter module)</comment>
221# <c>modprobe sd_mod</c> 222# <c>modprobe sd_mod</c>
223<comment>(sd_mod is the module for SCSI disk support)</comment>
222 </pre> 224 </pre>
223 <p><c>aic7xxx</c> supports your SCSI controller and <c>sd_mod</c> supports SCSI hard disks. </p> 225 <p><c>aic7xxx</c> supports your SCSI controller and <c>sd_mod</c> supports SCSI hard disks. </p>
224 <note> 226 <note>
225 Support for a SCSI CD-ROMs and disks are built-in in the kernel. 227 Support for a SCSI CD-ROMs and disks are built-in in the kernel.
226 </note> 228 </note>
227 <p>If you are using hardware RAID, you'll need to load the 229 <p>If you are using hardware RAID, you'll need to load the
228 ATA-RAID modules for your RAID controller. 230 ATA-RAID modules for your RAID controller.
229 </p> 231 </p>
230 <pre caption="Loading RAID Modules"> 232 <pre caption="Loading RAID Modules">
231# <c>modprobe ataraid</c> 233# <c>modprobe ataraid</c>
232# <c>modprobe pdcraid</c> 234# <c>modprobe pdcraid</c>
233 <comment>(Promise Raid Controller)</comment> 235 <comment>(Promise Raid Controller)</comment>
234# <c>modprobe hptraid</c> 236# <c>modprobe hptraid</c>
235 <comment>(Highpoint Raid Controller)</comment> 237 <comment>(Highpoint Raid Controller)</comment>
236 </pre> 238 </pre>

Legend:
Removed from v.1.72  
changed lines
  Added in v.1.73

  ViewVC Help
Powered by ViewVC 1.1.20