Contents of /xml/htdocs/doc/en/gentoo-x86-install.xml

Parent Directory Parent Directory | Revision Log Revision Log

Revision 1.174 - (show annotations) (download) (as text)
Tue Sep 30 09:02:43 2003 UTC (15 years, 2 months ago) by swift
Branch: MAIN
Changes since 1.173: +43 -9 lines
File MIME type: application/xml
Fix bug 29685

1 <?xml version="1.0" encoding="UTF-8"?>
2 <!DOCTYPE guide SYSTEM "/dtd/guide.dtd">
3 <guide link="/doc/en/gentoo-x86-install.xml">
4 <title>Gentoo Linux 1.4 Installation Instructions</title>
5 <author title="Chief Architect">
6 <mail link="drobbins@gentoo.org">Daniel Robbins</mail>
7 </author>
8 <author title="Author">Chris Houser</author>
9 <author title="Author">Jerry Alexandratos</author>
10 <author title="Ghost, Reviewer">
11 <mail link="g2boojum@gentoo.org">Grant Goodyear</mail>
12 </author>
13 <author title="Editor">
14 <mail link="zhen@gentoo.org">John P. Davis</mail>
15 </author>
16 <author title="Editor">
17 <mail link="Pierre-Henri.Jondot@wanadoo.fr">Pierre-Henri Jondot</mail>
18 </author>
19 <author title="Editor">
20 <mail link="stocke2@gentoo.org">Eric Stockbridge</mail>
21 </author>
22 <author title="Editor">
23 <mail link="rajiv@gentoo.org">Rajiv Manglani</mail>
24 </author>
25 <author title="Editor">
26 <mail link="seo@gentoo.org">Jungmin Seo</mail>
27 </author>
28 <author title="Editor">
29 <mail link="zhware@gentoo.org">Stoyan Zhekov</mail>
30 </author>
31 <author title="Editor">
32 <mail link="jhhudso@gentoo.org">Jared Hudson</mail>
33 </author>
34 <author title="Editor">Colin Morey</author>
35 <author title="Editor">
36 <mail link="peesh@gentoo.org">Jorge Paulo</mail>
37 </author>
38 <author title="Editor">
39 <mail link="carl@gentoo.org">Carl Anderson</mail>
40 </author>
41 <author title="Editor, Reviewer">
42 <mail link="swift@gentoo.org">Sven Vermeulen</mail>
43 </author>
44 <author title="Editor">
45 <mail link="avenj@gentoo.org">Jon Portnoy</mail>
46 </author>
47 <author title="Editor">
48 <mail link="klasikahl@gentoo.org">Zack Gilburd</mail>
49 </author>
50 <author title="Reviewer">
51 <mail link="gerrynjr@gentoo.org">Gerald J. Normandin Jr.</mail>
52 </author>
53 <author title="Reviewer">
54 <mail link="spyderous@gentoo.org">Donnie Berkholz</mail>
55 </author>
56 <author title="Reviewer">
57 <mail link="antifa@gentoo.org">Ken Nowack</mail>
58 </author>
59 <author title="Editor, Reviewer">
60 <mail link="bennyc@gentoo.org">Benny Chuang</mail>
61 </author>
63 <abstract>
64 These instructions step you through the process of installing Gentoo
65 Linux 1.4, release version (not _rc versions). The Gentoo Linux installation
66 process supports various installation approaches, depending upon how much of
67 the system you want to custom-build from scratch.
68 </abstract>
70 <license/>
72 <version>2.6.17</version>
73 <date>September 30, 2003</date>
75 <chapter>
76 <title>About the Install</title>
77 <section>
78 <body>
80 <p>
81 First, if you are new to this, welcome to Gentoo Linux! Gentoo
82 Linux can be installed in many different ways. Those who are looking
83 for a rapid install can use pre-built packages, while those who want
84 the ultimate in customizability can compile Gentoo Linux entirely
85 from the original source code. The method you choose is up to
86 you.
87 </p>
89 <p>
90 One significant change in relation to the official 1.4 release is
91 our new 2-CD installation set, which can be ordered from <uri
92 link="http://store.gentoo.org">The Gentoo Linux Store</uri>, in
93 addition to being available on our
94 <uri link="http://www.gentoo.org/main/en/mirrors.xml">mirrors</uri>.
95 We currently have 2-CD installation sets for x86 (486 and above),
96 i686 (Pentium Pro, Pentium II, Athlon/Duron and above), Pentium III,
97 Pentium 4 and Athlon XP. To see what 2-CD set is right for you, read
98 the detailed descriptions of each product in the <uri
99 link="http://store.gentoo.org">store</uri>. The store descriptions
100 contain fairly comprehensive CPU compatibility information.
101 </p>
103 <p>
104 You can find and download the ISOs for the LiveCDs from most of our
105 mirrors. The LiveCDs for the x86 architecture are located inside the
106 <path>releases/x86/1.4/livecd/</path> subdirectory.
107 </p>
109 <p>So, about the 2 CD set -- here's what's on each CD. The first
110 CD ("CD 1") is called "Live CD Installation" and is a bootable CD-ROM,
111 meaning that you can put "CD 1" in your drive and run Gentoo Linux
112 directly from the CD. You can then use this CD-based version of
113 Gentoo to install Gentoo Linux 1.4 to your hard disk. In addition
114 to containing a bootable Gentoo Linux environment, CD 1
115 contains everything you need to install Gentoo Linux quickly, even
116 without a connection to the Internet. In addition, several
117 pre-compiled packages are also included on CD 1, such as the
118 ever-important XFree86 X server. If you have an ISO CD-ROM image
119 file for CD 1, its name will contain <path>-cd1</path>.
120 </p>
122 <p>
123 In contrast, the second CD ("CD 2") isn't bootable and contains
124 lots of pre-built packages for your system. Included on this CD are
125 optimized versions of packages such as KDE, GNOME, OpenOffice,
126 Mozilla, Evolution and others. CD 2 is <e>optional</e> and is
127 intended for those people who are interested in installing Gentoo
128 Linux very quickly. The packages included on CD 2 typically take
129 about 36 hours to compile from source on a typical modern
130 single-processor system. If you have an ISO CD-ROM image file for CD
131 2, its name will contain <path>-cd2</path>.
132 </p>
134 <note>
135 A complete Gentoo Linux 2-CD set contains the Gentoo Reference
136 Platform, which is a complete pre-built Gentoo Linux system including GNOME,
137 KDE, Mozilla and OpenOffice. The Gentoo Reference Platform ("GRP")
138 was created to allow rapid Gentoo Linux package installations
139 for those who need this capability. The "compile from
140 source" functionality, which is the cornerstone of Gentoo Linux,
141 will always be a fully-supported installation option as well. The
142 purpose of the GRP is to make Gentoo Linux more convenient for some
143 users, without impacting Gentoo's powerful "compile from source"
144 installation process in any way.
145 </note>
147 <p>
148 In addition to our 2-CD set, we also have a very small "basic"
149 Live CD that you can use to boot your system. Once your system has
150 booted, you can configure a connection to the Internet and then
151 install Gentoo over the network. The advantage of this "basic" CD is
152 that it is small and thus the ISO CD-ROM image file can be
153 downloaded quickly. If you're an advanced user who wants to install
154 the most up-to-date version of Gentoo Linux available and have a
155 fast network connection, then you may prefer this option. If you
156 have an ISO CD-ROM image file for our "basic" Live CD, its name will
157 contain <path>-basic</path>.
158 </p>
160 <p>
161 To use any Gentoo Linux CD-based installation method, you will
162 need to have a 486+ processor and ideally at least 64 Megabytes of
163 RAM. (Gentoo Linux has been successfully built with 64MB of RAM +
164 64MB of swap space, but the build process is awfully slow under
165 those conditions.)
166 </p>
168 <p>
169 Once you boot one of our Live CDs, you have even more options.
170 Gentoo Linux can be installed using one of three &quot;stage&quot;
171 tarball files. The one you choose depends on how much of the system
172 you want to compile yourself. The stage1 tarball is used when you
173 want to bootstrap and build the entire system from scratch. The
174 stage2 tarball is used for building the entire system from a
175 bootstrapped "semi-compiled" state. The stage3 tarball already
176 contains a basic Gentoo Linux system that has been built for
177 you. If you are interested in doing a "GRP" install, then the
178 stage3 tarball should be used.
179 </p>
181 <p>
182 <b>If you're not doing a GRP install, should you start from a stage1, stage2, or
183 stage3 tarball?</b> Here is some information that should help you
184 make this decision.
185 </p>
187 <p>
188 Starting from a stage1 allows you to have total
189 control over the optimization settings and optional build-time
190 functionality that is initially enabled on your system. This makes
191 stage1 installs good for power users who know what they are doing.
192 It is also a great installation method for those who would like to
193 know more about the inner workings of Gentoo Linux.
194 </p>
196 <p>
197 Stage2 installs allow you to skip the bootstrap process and doing
198 this is fine if you are happy with the optimization settings that we
199 chose for your particular stage2 tarball.
200 </p>
202 <p>
203 And choosing to go with a stage3 allows for the fastest install of Gentoo
204 Linux, but also means that your base system will have the optimization
205 settings that we chose for you (which to be honest, are good settings and were
206 carefully chosen to enhance performance while maintaining
207 stability). Since major releases of Gentoo Linux have stage3's
208 specifically optimized for various popular processors, starting
209 from a stage3 can offer the best of all worlds -- a fast install
210 and a system that is well-optimized.
211 </p>
213 <p>
214 <b>If you're installing Gentoo Linux for the first time, consider using a
215 stage3 tarball for installation, or a stage3 with GRP.</b>
216 </p>
218 <note>
219 <b>Advanced users:</b> If you use a stage3 install, you should not
220 change the default CHOST setting in <path>/etc/make.conf</path>. If you need
221 to make such a change, you should start with a stage1 tarball and build up
222 your system with the desired CHOST setting. The CHOST setting
223 typically looks something like this: <c>i686-pc-linux-gnu</c>.
224 </note>
226 <impo>
227 If you encounter a problem with any part of the install and wish to
228 report it as a bug, report it to <uri>http://bugs.gentoo.org</uri>. If the bug
229 needs to be sent upstream to the original software developers (e.g. the KDE
230 team) the <e>Gentoo Linux developers</e> will take care of that for you.
231 </impo>
233 <note>
234 The installation instructions in the LiveCD may not be as up-to-date as our
235 Web documentation at <uri>http://www.gentoo.org/doc/en/gentoo-x86-install.xml</uri>.
236 Refer to our Web documentation for the most up-to-date installation
237 instructions.
238 </note>
240 <p>
241 Now, let us quickly review the install process. First, we will download, burn
242 CD(s) and boot a LiveCD. After getting a root prompt, we will create
243 partitions, create our filesystems and extract either a stage1, stage2 or
244 stage3 tarball. If we are using a stage1 or stage2 tarball, we will take
245 the appropriate steps to get our system to stage3. Once our system is at
246 stage3, we can configure it (customize configuration files, install a boot
247 loader, etc.), boot it and have a fully-functional Gentoo Linux system. After
248 your basic Gentoo Linux system is running, you can optionally use "CD 2" of
249 our 2-CD set and install any number of pre-built packages such as KDE, GNOME,
250 OpenOffice, Mozilla, or others that you'd like on your system.
251 </p>
253 <p>
254 Depending on what stage of the build process you're starting from, here is
255 what is required for installation:
256 </p>
258 <table>
259 <tcolumn width="0.75in"/>
260 <tcolumn width="1in"/>
261 <tcolumn width="1.25in"/>
262 <tcolumn width="3.5in"/>
263 <tr>
264 <th>Stage Tarball</th>
265 <th>Internet Access Required</th>
266 <th>Media Required</th>
267 <th>Steps</th>
268 </tr>
269 <tr>
270 <ti>1</ti>
271 <ti>Yes</ti>
272 <ti><e>basic</e> or <e>CD 1</e></ti>
273 <ti>partition/filesystem setup, emerge sync, bootstrap, emerge system, final config</ti>
274 </tr>
275 <tr>
276 <ti>2</ti>
277 <ti>Yes</ti>
278 <ti><e>basic</e> or <e>CD 1</e></ti>
279 <ti>partition/filesystem setup, emerge sync, emerge system, final config</ti>
280 </tr>
281 <tr>
282 <ti>3</ti>
283 <ti>No if using <e>CD 1</e>, Yes otherwise</ti>
284 <ti><e>basic</e> or <e>CD 1</e></ti>
285 <ti>partition/filesystem setup, emerge sync (not required if using <e>CD 1</e>), final config</ti>
286 </tr>
287 <tr>
288 <ti>3+GRP</ti>
289 <ti>No</ti>
290 <ti><e>CD 1</e>, <e>CD 2</e> optionally</ti>
291 <ti>partition/filesystem setup, final config, install CD 1 pre-built packages (optional), reboot, install extra pre-built packages like KDE and GNOME (if using "CD 2")</ti>
292 </tr>
293 </table>
295 <note>
296 Hardware ATA RAID users should read the section about ATA RAID on the bottom
297 of this document before proceeding.
298 </note>
300 </body>
301 </section>
302 </chapter>
304 <chapter>
305 <title>Booting</title>
306 <section>
307 <body>
309 <warn>
310 Read this whole section before proceeding, especially the available boot
311 options. Ignoring this could lead to wrong keyboard settings, unstarted
312 pcmcia services etc..
313 </warn>
315 <p>
316 Start by booting your Live CD of choice. You should see a fancy
317 boot screen with the Gentoo Linux logo on it. At this screen, you
318 can hit Enter to begin the boot process, or boot the LiveCD with
319 custom boot options by specifying a kernel followed by boot options
320 and then hitting Enter. For example: <c>gentoo nousb nohotplug</c>.
321 If you are installing Gentoo Linux on a system with more than one
322 processor ("SMP"), then you should type <c>smp</c> instead of
323 <c>gentoo</c> at the prompt. This will allow the LiveCD to see all
324 the processors in your system, not just the first one.
325 </p>
327 <p>
328 Consult the following table for a partial list of available kernels and
329 options or press F2 and F3 to view the help screens.
330 </p>
332 <table>
333 <tcolumn width="2in"/>
334 <tcolumn width="4in"/>
335 <tr><th>Available kernels</th><th>Description</th></tr>
336 <tr><ti>gentoo</ti><ti>standard gentoo kernel (default)</ti></tr>
337 <tr><ti>nofb</ti><ti>framebuffer mode disabled</ti></tr>
338 <tr><ti>smp</ti><ti>loads a smp kernel in noframebuffer mode</ti></tr>
339 <tr><ti>acpi</ti><ti>enables acpi=on + loads acpi modules during init</ti></tr>
340 <tr><ti>memtest</ti><ti>boots the memory testing program</ti></tr>
341 </table>
343 <table>
344 <tcolumn width="2in"/>
345 <tcolumn width="4in"/>
346 <tr><th>Available boot options</th><th>Description</th></tr>
347 <tr><ti>doataraid</ti><ti>loads ide raid modules from initrd</ti></tr>
348 <tr><ti>dofirewire</ti><ti>modprobes firewire modules in initrd (for firewire cdroms,etc.)</ti></tr>
349 <tr><ti>dokeymap</ti><ti>enable keymap selection for non-us keyboard layouts</ti></tr>
350 <tr><ti>dopcmcia</ti><ti>starts pcmcia service</ti></tr>
351 <tr><ti>doscsi</ti><ti>scan for scsi devices (breaks some ethernet cards)</ti></tr>
352 <tr><ti>noapm</ti><ti>disables apm module load</ti></tr>
353 <tr><ti>nodetect</ti><ti>causes hwsetup/kudzu and hotplug not to run</ti></tr>
354 <tr><ti>nodhcp</ti><ti>dhcp does not automatically start if nic detected</ti></tr>
355 <tr><ti>nohotplug</ti><ti>disables loading hotplug service</ti></tr>
356 <tr><ti>noraid</ti><ti>disables loading of evms modules</ti></tr>
357 <tr><ti>nousb</ti><ti>disables usb module load from initrd, disables hotplug</ti></tr>
358 <tr><ti>ide=nodma</ti><ti>force disabling of dma for malfunctioning ide devices</ti></tr>
359 <tr><ti>cdcache</ti><ti>cache the entire runtime portion of cd in ram. This uses 40mb of RAM, but allows you to umount <path>/mnt/cdrom</path> and mount another cdrom</ti></tr>
360 </table>
362 <p>
363 Once you hit Enter, you will be greeted with an even fancier boot
364 screen and progress bar.
365 </p>
367 <p>
368 Once the boot process completes, you will be automatically logged in
369 to the "Live" Gentoo Linux as "<e>root</e>", the "super user". You should
370 have a root ("#") prompt on the current console and can also switch
371 to other consoles by pressing Alt-F2, Alt-F3 and Alt-F4. Get back to the one
372 you started on by pressing Alt-F1.
373 </p>
375 <note>
376 <b>Advanced users:</b> When the Live CD boots, the Live CD root password is
377 set to a random string for security purposes. If you plan to start
378 <c>sshd</c> to allow remote logins to your Live CD, you should set the Live
379 CD root password now by typing <c>passwd</c> and following the prompts.
380 Otherwise, you will not know the proper password for logging into the Live
381 CD over the network.
382 </note>
384 <p>
385 You've probably also noticed that above your # prompt is a bunch of
386 help text that explains how to do things like configure your Linux networking
387 and telling you where you can find the Gentoo Linux stage tarballs and packages
388 on your CD.
389 </p>
391 </body>
392 </section>
393 </chapter>
395 <chapter>
396 <title>Optional hardware configuration</title>
397 <section>
398 <body>
400 <p>
401 When the Live CD boots, it tries to detect all your hardware
402 devices and loads the appropiate kernel modules to support your
403 hardware. In the vast majority of cases, it does a very good job.
404 However, in some cases, it may not auto-load the kernel modules
405 you need. If the PCI auto-detection missed some of your system's hardware, you
406 will have to load the appropriate kernel modules manually.
407 To view a list of all available network card modules, type <c>ls
408 /lib/modules/`uname -r`/kernel/drivers/net/*</c>. To load a particular module,
409 type:
410 </p>
412 <pre caption="PCI Modules Configuration">
413 # <i>modprobe pcnet32</i>
414 <comment>(replace pcnet32 with your NIC module)</comment>
415 </pre>
417 <p>
418 Likewise, if you want to be able to access any SCSI hardware that wasn't
419 detected during the initial boot autodetection process, you will need to
420 load the appropriate modules from <path>/lib/modules</path>, again using
421 <c>modprobe</c>:
422 </p>
424 <pre caption="Loading SCSI Modules">
425 # <i>modprobe aic7xxx</i>
426 <comment>(replace aic7xxx with your SCSI adapter module)</comment>
427 # <i>modprobe sd_mod</i>
428 <comment>(sd_mod is the module for SCSI disk support)</comment>
429 </pre>
431 <note>
432 Support for SCSI CD-ROMs and disks are built-in in the kernel.
433 </note>
435 <note>
436 <b>Advanced users:</b> The Gentoo LiveCD should have enabled DMA
437 on your disks so that disk transfers are as fast as possible, but if it did not,
438 <c>hdparm</c> can be used to set DMA on your drives as follows:
439 <pre caption="Setting DMA">
440 <comment>(Replace hdX with your disk device)</comment>
441 # <i>hdparm -d 1 /dev/hdX</i>
442 <comment>(Enables DMA)</comment>
443 # <i>hdparm -d1 -A1 -m16 -u1 -a64 /dev/hdX</i>
444 <comment>(Enables DMA and other safe performance-enhancing options)</comment>
445 # <i>hdparm -X66 /dev/hdX</i>
446 <comment>(Force-enables Ultra-DMA -- dangerous -- may cause some drives to mess up)</comment>
447 </pre>
448 </note>
451 </body>
452 </section>
453 </chapter>
454 <chapter>
455 <title>Optional Networking configuration</title>
456 <section>
457 <title>Maybe it just works?</title>
458 <body>
460 <p>
461 If your system is plugged into an Ethernet network, it is very
462 likely that your networking configuration has already been
463 set up automatically for you. If so, you should be able to take advantage of
464 the many included network-aware commands on the LiveCD such as <c>ssh</c>,
465 <c>scp</c>, <c>ping</c>, <c>irssi</c>, <c>wget</c> and <c>links</c>, among
466 others.
467 </p>
469 <p>
470 If networking has been configured for you, the <c>/sbin/ifconfig</c> command
471 should list some internet interfaces besides lo, such as eth0:
472 </p>
474 <pre caption="/sbin/ifconfig for a working network card">
475 eth0 Link encap:Ethernet HWaddr 00:50:BA:8F:61:7A
476 inet addr: Bcast: Mask:
477 inet6 addr: fe80::50:ba8f:617a/10 Scope:Link
479 RX packets:1498792 errors:0 dropped:0 overruns:0 frame:0
480 TX packets:1284980 errors:0 dropped:0 overruns:0 carrier:0
481 collisions:1984 txqueuelen:100
482 RX bytes:485691215 (463.1 Mb) TX bytes:123951388 (118.2 Mb)
483 Interrupt:11 Base address:0xe800
484 </pre>
486 <p>
487 You may want to also try pinging your ISP's DNS server (found in
488 <path>/etc/resolv.conf</path>) and a Web site of choice, just to make sure
489 that your packets are reaching the net, DNS name resolution is working
490 correctly, etc..
491 </p>
493 <pre caption="Further Network Testing">
494 # <i>ping -c 3 www.yahoo.com</i>
495 </pre>
497 <p>
498 Are you able to use your network? If so, you can skip the rest of this
499 section.
500 </p>
502 </body>
503 </section>
504 <section>
505 <title>PPPoE configuration</title>
506 <body>
508 <p>
509 Assuming you need PPPoE to connect to the internet, the LiveCD (any version)
510 has made things easy for you by including <c>rp-pppoe</c>. Use the provided
511 <c>adsl-setup</c> script to configure your connection. You will be prompted
512 for the ethernet device that is connected to your adsl modem, your username
513 and password, the IPs of your DNS servers and if you need a basic firewall
514 or not.
515 </p>
517 <pre caption="Configuring PPPoE">
518 # <i> adsl-setup </i>
519 # <i> adsl-start </i>
520 </pre>
522 <p>
523 If something goes wrong, double-check that you correctly typed your username
524 and password by looking at <path>/etc/ppp/pap-secrets</path> or
525 <path>/etc/ppp/chap-secrets</path> and make sure you are using the right
526 ethernet device.
527 </p>
529 </body>
530 </section>
532 <section>
533 <title>Automatic Network Configuration </title>
534 <body>
536 <p>
537 The simplest way to set up networking if it didn't get configured
538 automatically is to run the <c>net-setup</c> script:
539 </p>
541 <pre caption="Net-Setup Script">
542 # <i>net-setup eth0</i>
543 </pre>
545 <p>
546 Of course, if you prefer, you may still set up networking manually. This is
547 covered next.
548 </p>
550 </body>
551 </section>
552 <section>
553 <title>Manual DHCP Configuration</title>
554 <body>
556 <p>
557 Network configuration is simple with DHCP; If your ISP is not using
558 DHCP, skip down to the static configuration section below.
559 </p>
561 <pre caption="Network configuration with DHCP">
562 # <i>dhcpcd eth0</i>
563 </pre>
565 <note>
566 Some ISPs require you to provide a hostname. To do that, add a
567 <c>-h myhostname</c> flag to the dhcpcd command line above.
568 </note>
570 <p>
571 If you receive <e>dhcpConfig</e> warnings, don't panic; the errors are most
572 likely cosmetic. Skip down to Network testing below.
573 </p>
575 </body>
576 </section>
577 <section>
578 <title>Manual Static Configuration</title>
579 <body>
581 <p>
582 We need to setup just enough networking so that we can download sources for
583 the system build, as well as the required localhost interface. The needed
584 information is explained in the next table.
585 </p>
587 <table>
588 <tcolumn width="1.25in"/>
589 <tcolumn width="4in"/>
590 <tcolumn width="1.25in"/>
591 <tr><th>Information</th><th>Description</th><th>Example value</th></tr>
592 <tr><ti>IP address</ti><ti>The IP address you want to assign to your network card</ti><ti></ti></tr>
593 <tr><ti>Broadcast address</ti><ti>The IP address which will broadcast the packets to all the hosts in the network</ti><ti></ti></tr>
594 <tr><ti>Network mask</ti><ti>The mask which is used together with the IP address to see what part of the address is for network-identification and host-identification</ti><ti></ti></tr>
595 <tr><ti>Gateway</ti><ti>The IP address of the computer which will forward the packets that are not meant for the local network (most of the time the computer which shares the internet connection)</ti><ti></ti></tr>
596 </table>
598 <p>
599 Type in the following commands, replacing <c>$IFACE</c> with your network
600 interface (typically <c>eth0</c>), <c>$IPNUM</c> with your IP address,
601 <c>$BCAST</c> with your broadcast address and <c>$NMASK</c> with your network
602 mask. For the <c>route</c> command, replace <c>$GTWAY</c> with your default
603 gateway.
604 </p>
606 <pre caption="Static IP Network Configuration">
607 # <i>ifconfig $IFACE $IPNUM broadcast $BCAST netmask $NMASK</i>
608 # <i>route add -net default gw $GTWAY netmask metric 1 $IFACE</i>
609 </pre>
611 <p>
612 Now it is time to create the <path>/etc/resolv.conf</path> file so that name
613 resolution (finding Web/FTP sites by name, rather than just by IP address)
614 will work. You can use <c>nano -w /etc/resolv.conf</c> to create
615 <path>/etc/resolv.conf</path>. <c>nano</c> is a small and easy-to-use
616 editor.
617 </p>
619 <p>
620 Here is a template to follow for creating your <path>/etc/resolv.conf</path>
621 file:
622 </p>
624 <pre caption="/etc/resolv.conf template">
625 domain mydomain.com
626 nameserver
627 nameserver
628 </pre>
630 <p>
631 Replace <c></c> and <c></c> with the IP addresses of your
632 primary and secondary DNS servers respectively.
633 </p>
635 </body>
636 </section>
638 <section>
639 <title>Proxy Configuration</title>
640 <body>
642 <p>
643 If you are behind a proxy, it could be necessary to configure your proxy
644 before you continue. We will export some variables to set up the proxy
645 accordingly.
646 </p>
648 <pre caption="Setting a Proxy">
649 <comment>If the proxy restricts HTTP traffic:</comment>
650 # <i>export http_proxy="http://machine.company.com:1234"</i>
651 <comment>If the proxy restricts FTP traffic:</comment>
652 # <i>export ftp_proxy="ftp://machine.company.com"</i>
653 <comment>If the proxy restricts RSYNC traffic:</comment>
654 # <i>export RSYNC_PROXY="rsync://machine.company.com"</i>
655 </pre>
657 </body>
658 </section>
660 <section>
661 <title>Networking is go!</title>
662 <body>
664 <p>
665 Networking should now be configured and usable. You should be able to use the
666 included <c>ssh</c>, <c>scp</c>, <c>links</c>, <c>irssi</c> and <c>wget</c>
667 commands to connect to other machines on your LAN or the Internet.
668 </p>
670 </body>
671 </section>
672 </chapter>
674 <chapter>
675 <title>Setting your system's date and time</title>
676 <section>
677 <body>
679 <p>
680 Now you need to set your system's date and time. You can do this using the
681 <c>date</c> command.
682 </p>
684 <pre caption="Setting your system's date">
685 # <i>date</i>
686 Thu Feb 27 09:04:42 CST 2003
687 <comment>(If your date is wrong, set your date with this next command)</comment>
688 # <i>date 022709042003</i>
689 <comment>(date MMDDhhmmCCYY)</comment>
690 </pre>
692 </body>
693 </section>
694 </chapter>
696 <chapter>
697 <title>Filesystems, partitions and block devices</title>
698 <section>
699 <title>Introduction to block devices</title>
700 <body>
702 <p>
703 In this section, we'll take a good look at disk-oriented aspects of Gentoo
704 Linux and Linux in general, including Linux filesystems, partitions and block
705 devices. Then, once you're familiar with the ins and outs of disks and
706 filesystems, you'll be guided through the process of setting up partitions
707 and filesystems for your Gentoo Linux installation.
708 </p>
710 <p>
711 To begin, I'll introduce "block devices". The most famous block device is
712 probably the one that represents the first IDE drive in a Linux system:
713 </p>
715 <pre caption="/dev/hda, the block device representing the primary master IDE drive in your system">
716 /dev/hda
717 </pre>
719 <p>
720 If your system uses SCSI drives, then your first hard drive will be:
721 </p>
723 <pre caption="/dev/sda, the block device representing the first logical SCSI drive in your system">
724 /dev/sda
725 </pre>
727 <p>
728 The block devices above represent an <e>abstract</e> interface to the disk.
729 User programs can use these block devices to interact with your disk without
730 worrying about whether your drives are IDE, SCSI or something else. The
731 program can simply address the storage on the disk as a bunch of contiguous,
732 randomly-accessible 512-byte blocks.
733 </p>
735 </body>
736 </section>
737 <section>
738 <title>Partitions and fdisk</title>
739 <body>
741 <p>
742 Under Linux, we create filesystems by using a special command called
743 <c>mkfs</c> (or <c>mke2fs</c>, <c>mkreiserfs</c>, etc.), specifying a particular
744 block device as a command-line argument.
745 </p>
747 <p>
748 However, although it is theoretically possible to use a "whole disk" block
749 device (one that represents the <e>entire</e> disk) like <path>/dev/hda</path>
750 or <path>/dev/sda</path> to house a single filesystem, this is almost never
751 done in practice. Instead, full disk block devices are split up into smaller,
752 more manageable block devices called "partitions". Partitions are created
753 using a tool called <c>fdisk</c>, which is used to create and edit the
754 partition table that's stored on each disk. The partition table defines
755 exactly how to split up the full disk.
756 </p>
758 <p>
759 We can take a look at a disk's partition table by running <c>fdisk</c>,
760 specifying a block device that represents a full disk as an argument:
761 </p>
763 <note>
764 Alternate interfaces to the disk's partition table include <c>cfdisk</c>,
765 <c>parted</c> and <c>partimage</c>. We recommend <c>fdisk</c> because it's
766 more powerful and well known in the Unix/Linux world.
767 </note>
769 <pre caption="Starting up fdisk">
770 # <i>fdisk /dev/hda</i>
771 </pre>
773 <p>
774 or
775 </p>
777 <pre caption="Starting up fdisk to look at the partition table on /dev/sda">
778 # <i>fdisk /dev/sda</i>
779 </pre>
781 <impo>
782 Note that you should <e>not</e> save or make any changes to a disk's
783 partition table if any of its partitions contain filesystems that are in use or
784 contain important data. Doing so will generally cause data on the disk to be
785 lost.
786 </impo>
788 <p>
789 Once in <c>fdisk</c>, you'll be greeted with a prompt that looks like this:
790 </p>
792 <pre caption="The fdisk prompt">
793 Command (m for help):
794 </pre>
796 <p>
797 Type <c>p</c> to display your disk's current partition configuration:
798 </p>
800 <pre caption="An example partition configuration">
801 Command (m for help): <i>p</i>
803 Disk /dev/hda: 240 heads, 63 sectors, 2184 cylinders
804 Units = cylinders of 15120 * 512 bytes
806 Device Boot Start End Blocks Id System
807 /dev/hda1 1 14 105808+ 83 Linux
808 /dev/hda2 15 49 264600 82 Linux swap
809 /dev/hda3 50 70 158760 83 Linux
810 /dev/hda4 71 2184 15981840 5 Extended
811 /dev/hda5 71 209 1050808+ 83 Linux
812 /dev/hda6 210 348 1050808+ 83 Linux
813 /dev/hda7 349 626 2101648+ 83 Linux
814 /dev/hda8 627 904 2101648+ 83 Linux
815 /dev/hda9 905 2184 9676768+ 83 Linux
817 Command (m for help):
818 </pre>
820 <p>
821 This particular disk is configured to house seven Linux filesystems (each
822 with a corresponding partition listed as "Linux") as well as a swap partition
823 (listed as "Linux swap").
824 </p>
826 <p>
827 Notice the name of the corresponding partition block
828 devices on the left hand side, starting with <path>/dev/hda1</path> and going
829 up to <path>/dev/hda9</path>. In the early days of the PC, partitioning
830 software only allowed a maximum of four partitions (called "primary"
831 partitions). This was too limiting, so a workaround called <e>extended
832 partitioning</e> was created. An extended partition is very similar to a
833 primary partition and counts towards the primary partition limit of four.
834 However, extended partitions can hold any number of so-called <e>logical</e>
835 partitions inside them, providing an effective means of working around the
836 four partition limit.
837 </p>
839 <p>
840 All partitions <path>/dev/hda5</path> and higher are logical partitions.
841 The numbers 1 through 4 are reserved for primary or extended partitions.
842 </p>
844 <p>
845 So, In our example, <path>/dev/hda1</path> through <path>/dev/hda3</path> are
846 primary partitions. <path>/dev/hda4</path> is an extended partition that
847 contains logical partitions <path>/dev/hda5</path> through
848 <path>/dev/hda9</path>. You would never actually <e>use</e>
849 <path>/dev/hda4</path> for storing any filesystems directly -- it simply
850 acts as a container for partitions <path>/dev/hda5</path> through
851 <path>/dev/hda9</path>.
852 </p>
854 <p>
855 Also, notice that each partition has an "Id", also called a "partition
856 type". Whenever you create a new partition, you should ensure that the
857 partition type is set correctly. '83' is the correct partition type for
858 partitions that will be housing Linux filesystems, '82' is the correct
859 partition type for Linux swap partitions and 'fd' is the recommended partition
860 type for Software RAID partitions. You set the partition type using the
861 <c>t</c> option in <c>fdisk</c>. The Linux kernel uses the partition type
862 setting to auto-detect filesystems and swap devices on the disk at boot-time.
863 </p>
865 </body>
866 </section>
868 <section>
869 <title>Using fdisk to set up partitions</title>
870 <body>
872 <p>
873 Now that you've had your introduction to the way disk partitioning is
874 done under Linux, it's time to walk you through the process of setting up disk
875 partitions for your Gentoo Linux installation. After we walk you through the
876 process of creating partitions on your disk, your partition configuration will
877 look like this:
878 </p>
880 <pre caption="The partition configuration that you will have after following these steps">
881 Disk /dev/hda: 30.0 GB, 30005821440 bytes
882 240 heads, 63 sectors/track, 3876 cylinders
883 Units = cylinders of 15120 * 512 = 7741440 bytes
885 Device Boot Start End Blocks Id System
886 /dev/hda1 * 1 14 105808+ 83 Linux
887 /dev/hda2 15 81 506520 82 Linux swap
888 /dev/hda3 82 3876 28690200 83 Linux
890 Command (m for help):
891 </pre>
893 <p>
894 In our suggested "newbie" partition configuration, we have three partitions.
895 The first one (<path>/dev/hda1</path>) at the beginning of the disk is a small
896 partition called a boot partition. The boot partition's purpose is to hold all
897 the critical data related to booting -- GRUB boot loader information (if you
898 will be using GRUB) as well as your Linux kernel(s). The boot partition gives
899 us a safe place to store everything related to booting Linux. During normal
900 day-to-day Gentoo Linux use, your boot partition should remain <e>unmounted</e>
901 for safety. If you are setting up a SCSI system, your boot partition will
902 likely end up being <path>/dev/sda1</path>.
903 </p>
905 <p>
906 It's recommended to have boot partitions (containing everything necessary for
907 the boot loader to work) at the beginning of the disk. While not necessarily
908 required anymore, it is a useful tradition from the days when the lilo boot
909 loader wasn't able to load kernels from filesystems that extended beyond disk
910 cylinder 1024.
911 </p>
913 <p>
914 The second partition (<path>/dev/hda2</path>) is used to for swap space. The
915 kernel uses swap space as virtual memory when RAM becomes low. This partition,
916 relatively speaking, isn't very big either, typically somewhere around 512MB.
917 If you're setting up a SCSI system, this partition will likely end up
918 being called <path>/dev/sda2</path>.
919 </p>
921 <p>
922 The third partition (<path>/dev/hda3</path>) is quite large and takes up the
923 rest of the disk. This partition is called our "root" partition and will be
924 used to store your main filesystem that houses Gentoo Linux itself. On a SCSI
925 system, this partition would likely end up being <path>/dev/sda3</path>.
926 </p>
928 <p>
929 Before we partition the disk, here's a quick technical overview of the
930 suggested partition and filesystem configuration to use when installing Gentoo
931 Linux:
932 </p>
934 <table>
935 <tcolumn width="1.5in"/>
936 <tcolumn width="2.5in"/>
937 <tcolumn width="2.5in"/>
938 <tcolumn width="1in"/>
939 <tr>
940 <th>Partition</th>
941 <th>Size</th>
942 <th>Type</th>
943 <th>example device</th>
944 </tr>
945 <tr>
946 <ti>boot partition, containing kernel(s) and boot information</ti>
947 <ti>32 Megabytes</ti>
948 <ti>ext2/3 highly recommended (easiest); if ReiserFS then mount with <c>-o notail</c>. If you will be using ext3 or ReiserFS, you must add the size of the journal to the partitionsize; in these cases 64 Megabytes is recommended</ti>
949 <ti><path>/dev/hda1</path></ti>
950 </tr>
951 <tr>
952 <ti>swap partition (no longer a 128 Megabyte limit, now 2GB)</ti>
953 <ti>Generally, configure a swap area that is between one and two times the size of the physical RAM in your system</ti>
954 <ti>Linux swap</ti>
955 <ti><path>/dev/hda2</path></ti>
956 </tr>
957 <tr>
958 <ti>root partition, containing main filesystem (/usr, /home, etc.)</ti>
959 <ti>&gt;=1.5 Gigabytes</ti>
960 <ti>ReiserFS, ext3 recommended; ext2 ok</ti>
961 <ti><path>/dev/hda3</path></ti>
962 </tr>
963 </table>
965 <p>
966 OK, now to create the partitions as in the example and table above. First,
967 enter fdisk by typing <c>fdisk /dev/hda</c> or <c>fdisk /dev/sda</c>,
968 depending on whether you're using IDE or SCSI. Then, type <c>p</c> to view your
969 current partition configuration. Is there anything on the disk that you need
970 to keep? If so, <b>stop now</b>. If you continue with these directions, <b>all
971 existing data on your disk will be erased</b>.
972 </p>
974 <impo>
975 Following these instructions below will cause all prior data on your disk
976 to <b>be erased</b>! If there is anything on your drive, please be sure that it
977 is non-critical information that you don't mind losing. Also make sure that you
978 <b>have selected the correct drive</b> so that you don't mistakenly wipe data
979 from the wrong drive.
980 </impo>
982 <p>
983 Now, it's time to delete any existing partitions. To do this, type <c>d</c>
984 and hit Enter. You will then be prompted for the partition number you would like
985 to delete. To delete a pre-existing <path>/dev/hda1</path>, you would type:
986 </p>
988 <pre caption="Deleting a partition">
989 Command (m for help): <i>d</i>
990 Partition number (1-4): <i>1</i>
991 </pre>
993 <p>
994 The partition has been scheduled for deletion. It will no longer show up if
995 you type <c>p</c>, but it will not be erased until your changes have been
996 saved. If you made a mistake and want to abort without saving your changes,
997 type <c>q</c> immediately and hit enter and your partition will not be
998 deleted.
999 </p>
1001 <p>
1002 Now, assuming that you do indeed want to wipe out all the partitions on your
1003 system, repeatedly type <c>p</c> to print out a partition listing and then type
1004 <c>d</c> and the number of the partition to delete it. Eventually, you'll end up
1005 with a partition table with nothing in it:
1006 </p>
1008 <pre caption="An empty partition table">
1009 Disk /dev/hda: 30.0 GB, 30005821440 bytes
1010 240 heads, 63 sectors/track, 3876 cylinders
1011 Units = cylinders of 15120 * 512 = 7741440 bytes
1013 Device Boot Start End Blocks Id System
1015 Command (m for help):
1016 </pre>
1018 <p>
1019 Now that the in-memory partition table is empty, we're ready to create a
1020 boot partition. To do this, type <c>n</c> to create a new partition, then
1021 <c>p</c> to tell fdisk you want a primary partition. Then type <c>1</c> to
1022 create the first primary partition. When prompted for the first cylinder, hit
1023 enter. When prompted for the last cylinder, type <c>+32M</c> to create a
1024 partition 32MB in size. You can see output from these steps below:
1025 </p>
1027 <note>
1028 Journaled filesystems require extra space for their journal. Default settings
1029 require about 33 Megabytes of space. Therefore, if you are using a journaled
1030 filesystem for <path>/boot</path>, you should type <c>+64M</c> when prompted
1031 for the last cylinder.
1032 </note>
1034 <pre caption="Steps to create our boot partition">
1035 Command (m for help): <i>n</i>
1036 Command action
1037 e extended
1038 p primary partition (1-4)
1039 <i>p</i>
1040 Partition number (1-4): <i>1</i>
1041 First cylinder (1-3876, default 1): <comment>(Hit Enter)</comment>
1042 Using default value 1
1043 Last cylinder or +size or +sizeM or +sizeK (1-3876, default 3876): <i>+32M</i>
1044 </pre>
1046 <p>
1047 Now, when you type <c>p</c>, you should see the following partition
1048 printout:
1049 </p>
1051 <pre caption="Our first partition has been created">
1052 Command (m for help): <i>p</i>
1054 Disk /dev/hda: 30.0 GB, 30005821440 bytes
1055 240 heads, 63 sectors/track, 3876 cylinders
1056 Units = cylinders of 15120 * 512 = 7741440 bytes
1058 Device Boot Start End Blocks Id System
1059 /dev/hda1 1 14 105808+ 83 Linux
1060 </pre>
1062 <p>
1063 Next, let's create the swap partition. To do this, type <c>n</c> to create a
1064 new partition, then <c>p</c> to tell fdisk that you want a primary partition.
1065 Then type <c>2</c> to create the second primary partition,
1066 <path>/dev/hda2</path> in our case. When prompted for the first cylinder,
1067 hit enter. When prompted for the last cylinder, type <c>+512M</c> to create
1068 a partition 512MB in size. After you've done this, type <c>t</c> to set the
1069 partition type, <c>2</c> to select the partition you just created and then
1070 type in <c>82</c> to set the partition type to "Linux Swap". After completing
1071 these steps, typing <c>p</c> should display a partition table that looks
1072 similar to this:
1073 </p>
1075 <pre caption="Our swap partition has been created">
1076 Command (m for help): <i>p</i>
1078 Disk /dev/hda: 30.0 GB, 30005821440 bytes
1079 240 heads, 63 sectors/track, 3876 cylinders
1080 Units = cylinders of 15120 * 512 = 7741440 bytes
1082 Device Boot Start End Blocks Id System
1083 /dev/hda1 1 14 105808+ 83 Linux
1084 /dev/hda2 15 81 506520 82 Linux swap
1085 </pre>
1087 <p>
1088 Finally, let's create the root partition. To do this, type <c>n</c> to
1089 create a new partition, then <c>p</c> to tell fdisk that you want a primary
1090 partition. Then type <c>3</c> to create the third primary partition,
1091 <path>/dev/hda3</path> in our case. When prompted for the first cylinder,
1092 hit enter. When prompted for the last cylinder, hit enter to create a
1093 partition that takes up the rest of the remaining space on your disk. After
1094 completing these steps, typing <c>p</c> should display a partition table that
1095 looks similar to this:
1096 </p>
1098 <pre caption="Our root partition has been created">
1099 Command (m for help): <i>p</i>
1101 Disk /dev/hda: 30.0 GB, 30005821440 bytes
1102 240 heads, 63 sectors/track, 3876 cylinders
1103 Units = cylinders of 15120 * 512 = 7741440 bytes
1105 Device Boot Start End Blocks Id System
1106 /dev/hda1 1 14 105808+ 83 Linux
1107 /dev/hda2 15 81 506520 82 Linux swap
1108 /dev/hda3 82 3876 28690200 83 Linux
1109 </pre>
1111 <p>
1112 Finally, we need to set the "bootable" flag on our boot partition and then write
1113 our changes to disk. To tag <path>/dev/hda1</path> as a "bootable" partition,
1114 type <c>a</c> at the menu and then type in <c>1</c> for the partition number.
1115 If you type <c>p</c> now, you'll now see that <path>/dev/hda1</path> has a
1116 <c>*</c> in the "Boot" column. Now, let's write our changes to disk. To do
1117 this, type <c>w</c> and hit enter. Your disk partitions are now properly
1118 configured for a Gentoo Linux install.
1119 </p>
1121 <note>
1122 If <c>fdisk</c> or <c>cfdisk</c> instruct you to do so, please reboot to
1123 allow your system to detect the new partition configuration.
1124 </note>
1126 </body>
1127 </section>
1129 <section>
1130 <title>Creating filesystems</title>
1131 <body>
1133 <p>
1134 Now that the partitions have been created, it's time to set up filesystems on
1135 the boot and root partitions so that they can be mounted and used to store
1136 data. We will also configure the swap partition to serve as swap storage.
1137 </p>
1139 <p>
1140 Gentoo Linux supports a variety of different types of filesystems; each type has
1141 its strengths and weaknesses and its own set of performance characteristics.
1142 Currently, we support the creation of ext2, ext3, XFS, JFS and ReiserFS
1143 filesystems.
1144 </p>
1146 <p>
1147 ext2 is the tried and true Linux filesystem but doesn't have metadata
1148 journaling, which means that routine ext2 filesystem checks at startup time can
1149 be quite time-consuming. There is now quite a selection of newer-generation
1150 <e>journaled</e> filesystems that can be checked for consistency very quickly
1151 and are thus generally preferred over their non-journaled counterparts.
1152 Journaled filesystems prevent long delays when you boot your system and your
1153 filesystem happens to be in an <e>inconsistent</e> state.
1154 </p>
1156 <p>
1157 ext3 is the journaled version of the ext2 filesystem, providing metadata
1158 journaling for fast recovery in addition to other enhanced journaling modes
1159 like full data and ordered data journaling. ext3 is a very good and reliable
1160 filesystem. It offers generally decent performance under most conditions.
1161 Because it does not extensively employ the use of "trees" in its internal
1162 design, it doesn't scale very well, meaning that it is not an ideal choice for
1163 very large filesystems, or situations where you will be handling very large
1164 files or large quantities of files in a single directory. But when used within
1165 its design parameters, ext3 is an excellent filesystem.
1166 </p>
1168 <p>
1169 ReiserFS is a B*-tree based filesystem that has very good overall
1170 performance and greatly outperforms both ext2 and ext3 when dealing with small
1171 files (files less than 4k), often by a factor of 10x-15x. ReiserFS also scales
1172 extremely well and has metadata journaling. As of kernel 2.4.18+, ReiserFS is
1173 now rock-solid and highly recommended for use both as a general-purpose
1174 filesystem and for extreme cases such as the creation of large filesystems, the
1175 use of many small files, very large files and directories containing tens of
1176 thousands of files. ReiserFS is the filesystem we recommend by default for all
1177 non-boot partitions.
1178 </p>
1180 <p>
1181 XFS is a filesystem with metadata journaling that is fully supported under
1182 Gentoo Linux's <c>xfs-sources</c> kernel. It comes with a robust
1183 feature-set and is optimized for scalability. We only recommend using this
1184 filesystem on Linux systems with high-end SCSI and/or fibre channel storage and
1185 a uninterruptible power supply. Because XFS aggressively caches in-transit data
1186 in RAM, improperly designed programs (those that don't take proper precautions
1187 when writing files to disk and there are quite a few of them) can lose a good
1188 deal of data if the system goes down unexpectedly.
1189 </p>
1191 <p>
1192 JFS is IBM's high-performance journaling filesystem. It has recently
1193 become production-ready and there hasn't been a sufficient track record to
1194 comment positively nor negatively on its general stability at this
1195 point.
1196 </p>
1198 <p>
1199 If you're looking for the most rugged journaling filesystem, use ext3. If
1200 you're looking for a good general-purpose high-performance filesystem with
1201 journaling support, use ReiserFS; both ext3 and ReiserFS are mature,
1202 refined and recommended for general use.
1203 </p>
1205 <p>
1206 Based on our example above, we will use the following commands to initialize
1207 all our partitions for use:
1208 </p>
1210 <pre caption="Initializing our partitions (example)">
1211 # <i>mke2fs -j /dev/hda1</i>
1212 # <i>mkswap /dev/hda2</i>
1213 # <i>mkreiserfs /dev/hda3</i>
1214 </pre>
1216 <p>
1217 We choose ext3 for our <path>/dev/hda1</path> boot partition because it is a
1218 robust journaling filesystem supported by all major boot loaders. We used
1219 <c>mkswap</c> for our <path>/dev/hda2</path> swap partition -- the choice is
1220 obvious here. And for our main root filesystem on <path>/dev/hda3</path> we
1221 choose ReiserFS, since it is a solid journaling filesystem offering excellent
1222 performance. Now, go ahead and initialize your partitions.
1223 </p>
1225 <p>
1226 For your reference, here are the various <c>mkfs</c>-like commands available
1227 during the installation process:
1228 </p>
1230 <p>
1231 <c>mkswap</c> is the command that is used to initialize swap partitions:
1232 </p>
1234 <pre caption="Initializing Swap">
1235 # <i>mkswap /dev/hda2</i>
1236 </pre>
1238 <p>
1239 You can use the <c>mke2fs</c> command to create ext2 filesystems:
1240 </p>
1242 <pre caption="Creating an ext2 Filesystem">
1243 # <i>mke2fs /dev/hda1</i>
1244 </pre>
1246 <p>
1247 If you would like to use ext3, you can create ext3 filesystems using
1248 <c>mke2fs -j</c>:
1249 </p>
1251 <pre caption="Creating an ext3 Filesystem">
1252 # <i>mke2fs -j /dev/hda3</i>
1253 </pre>
1255 <note>
1256 You can find out more about using ext3 under Linux 2.4 at
1257 <uri>http://www.zip.com.au/~akpm/linux/ext3/ext3-usage.html</uri>.
1258 </note>
1260 <p>
1261 To create ReiserFS filesystems, use the <c>mkreiserfs</c> command:
1262 </p>
1264 <pre caption="Creating a ReiserFS Filesystem">
1265 # <i>mkreiserfs /dev/hda3</i>
1266 </pre>
1268 <p>
1269 To create an XFS filesystem, use the <c>mkfs.xfs</c> command:
1270 </p>
1272 <pre caption="Creating a XFS Filesystem">
1273 # <i>mkfs.xfs /dev/hda3</i>
1274 </pre>
1276 <note>
1277 You may want to add a couple of additional flags to the <c>mkfs.xfs</c>
1278 command: <c>-d agcount=3 -l size=32m</c>. The <c>-d agcount=3</c> command
1279 will lower the number of allocation groups. XFS will insist on using at
1280 least 1 allocation group per 4 GB of your partition, so, for example, if
1281 you have a 20 GB partition you will need a minimum agcount of 5. The
1282 <c>-l size=32m</c> command increases the journal size to 32 Mb, increasing
1283 performance.
1284 </note>
1286 <p>
1287 To create JFS filesystems, use the <c>mkfs.jfs</c> command:
1288 </p>
1290 <pre caption="Creating a JFS Filesystem">
1291 # <i>mkfs.jfs /dev/hda3</i>
1292 </pre>
1294 </body>
1295 </section>
1296 </chapter>
1298 <chapter>
1299 <title>Mount Partitions</title>
1300 <section>
1301 <body>
1303 <p>
1304 Now, we will activate our newly-initialized swap volume, since we may need
1305 the additional virtual memory that it provides later:
1306 </p>
1308 <pre caption="Activating Swap">
1309 # <i>swapon /dev/hda2</i>
1310 </pre>
1312 <p>
1313 Next, we will create the <path>/mnt/gentoo/boot</path> mount point,
1314 and we will mount our filesystems to the mount points. Once our boot and
1315 root filesystems are mounted, any files we copy or create inside
1316 <path>/mnt/gentoo</path> will be placed on our new filesystems.
1317 Note that if you are setting up Gentoo Linux with separate
1318 <path>/usr</path> or <path>/var</path> filesystems, these would get mounted to
1319 <path>/mnt/gentoo/usr</path> and <path>/mnt/gentoo/var</path> respectively.
1320 </p>
1322 <impo>
1323 If your <path>/boot</path> partition (the one holding the kernel) is ReiserFS,
1324 be sure to mount it with the <c>-o notail</c> option so GRUB gets properly
1325 installed. Make sure that <c>notail</c> ends up in your new
1326 <path>/etc/fstab</path> boot partition entry, too.
1327 We will get to that in a bit. If you are going to use LILO with ReiserFS,
1328 then the <c>-o notail</c> is not needed. It's always safe to specify the
1329 <c>-o notail</c> option with ReiserFS if you're not sure what to do.
1330 </impo>
1332 <pre caption="Creating Mount Points">
1333 # <i>mount /dev/hda3 /mnt/gentoo</i>
1334 # <i>mkdir /mnt/gentoo/boot</i>
1335 # <i>mount /dev/hda1 /mnt/gentoo/boot</i>
1336 </pre>
1338 <impo>
1339 If you are having problems mounting your boot partition with ext2, try using
1340 <c>mount /dev/hXX /mnt/gentoo/boot -t ext2</c>
1341 </impo>
1343 </body>
1344 </section>
1345 </chapter>
1348 <chapter>
1349 <title>Stage tarballs and chroot</title>
1350 <section>
1351 <title>Selecting the desired stage tarball</title>
1352 <body>
1354 <p>
1355 Now, you need to decide which one you would like to use as a
1356 basis for the install if you haven't already. The stages on the Live CD are
1357 in <path>/mnt/cdrom/stages/</path> and you can type <c>ls
1358 /mnt/cdrom/stages/</c> to see what's available on your CD.
1359 </p>
1361 <p>
1362 <b>GRP users</b> should use the <path>stage3-xx-yy.tar.bz2</path> tarball.
1363 </p>
1365 <p>
1366 If you would like to perform an install using a stage tarball that is
1367 <e>not</e> on your CD (which will likely be the case if you're using our
1368 "basic" Live CD), this is still possible, but you'll need to download the
1369 stage you want using the following instructions. If you already have the stage
1370 tarball you want to use (which most users will have), then proceed to the
1371 "Extracting the stage tarball" section.
1372 </p>
1374 <note>
1375 If you want to use a proxy (say proxy.server.tld:8080), add
1376 <c>-http-proxy proxy.server.tld:8080</c> to the <c>links</c> command
1377 mentioned below.
1378 </note>
1380 <pre caption="Downloading Required Stages">
1381 # <i>cd /mnt/gentoo</i>
1382 <comment>Use links to get the URL for your tarball:</comment>
1383 # <i>links http://gentoo.oregonstate.edu/releases/x86/1.4/</i>
1384 <comment>Use <c>Up</c> and <c>Down</c> arrows keys (or the <c>TAB</c> key) to go to the right directory
1385 Highlight the appropriate stage you want to download
1386 Press <c>d</c> which will initiate the download
1387 Save the file and quit the browser
1389 <b>OR</b> use wget from the command line:</comment>
1390 # <i>wget </i><comment>(insert URL to the required stage tarball here)</comment>
1391 </pre>
1393 </body>
1394 </section>
1395 <section>
1396 <title>Extracting the stage tarball</title>
1397 <body>
1399 <p>
1400 Now it is time to extract the compressed stage tarball of your choice to
1401 <path>/mnt/gentoo/</path>. Remember, you only need to unpack <b>one</b> stage
1402 tarball, either a stage1, stage2 or stage3. So, if you wanted to perform a
1403 stage3 install of Gentoo, then you would just unpack the stage3 tarball.
1404 Unpack the stage tarball as follows:
1405 </p>
1407 <impo>
1408 Be sure to use the <c>p</c> option with <c>tar</c>. Forgetting to do this will
1409 cause certain files to have incorrect permissions.
1410 </impo>
1412 <pre caption="Unpacking the Stages">
1413 # <i>cd /mnt/gentoo</i>
1414 <comment>Change "stage3" to "stage2" or "stage1" if you want to start from these stages instead.</comment>
1415 <comment>If you downloaded your stage tarball, change the path below to begin with "/mnt/gentoo/"
1416 instead of "/mnt/cdrom/stages/".</comment>
1417 # <i>tar -xvjpf /mnt/cdrom/stages/stage3-*.tar.bz2</i>
1418 </pre>
1420 <p>
1421 If you downloaded your stage tarball to <path>/mnt/gentoo</path>, you can now
1422 delete it by typing <c>rm /mnt/gentoo/stage*.tar.bz2</c>.
1423 </p>
1425 </body>
1426 </section>
1428 <section>
1429 <title>GRP package/snapshot steps</title>
1430 <body>
1432 <impo>
1433 The following instructions are for GRP users only. If you are not using
1434 GRP, continue with "Selecting Mirrors (Optional)".
1435 </impo>
1437 <p>
1438 <b>GRP Users</b>: There is a Portage snapshot on the Live CD. You will
1439 need to use this snapshot so that you can skip the <c>emerge sync</c> step
1440 later in this document, since <c>emerge sync</c> requires a network
1441 connection. Untar this snapshot as follows:
1442 </p>
1444 <pre caption="Using Portage snapshot">
1445 <comment>Replace yyyymmdd with the datestamp in the filename.</comment>
1446 # <i>tar -xvjf /mnt/cdrom/snapshots/portage-yyyymmdd.tar.bz2 -C /mnt/gentoo/usr</i>
1447 </pre>
1449 <p>
1450 This will extract a snapshot of the Portage tree to your fresh Gentoo
1451 install. Now you won't need to connect to the Internet and use <c>emerge
1452 sync</c> to download a Portage tree. Now, copy distfiles and packages
1453 from the Live CD into place:
1454 </p>
1456 <pre caption="Copying GRP files">
1457 # <i>cp -R /mnt/cdrom/distfiles /mnt/gentoo/usr/portage/distfiles</i>
1458 # <i>cp -a /mnt/cdrom/packages /mnt/gentoo/usr/portage/packages</i>
1459 </pre>
1461 <p>
1462 All relevant files are now in place for using GRP. You should now have
1463 everything copied over and unpacked that you'll need to install Gentoo Linux
1464 -- even without a network connection.
1465 </p>
1467 </body>
1468 </section>
1470 <section>
1471 <title>Selecting Mirrors (Optional)</title>
1472 <body>
1474 <p>
1475 <c>mirrorselect</c> is a tool designed to automatically pick the fastest
1476 mirrors based on your location, or manually pick a mirror from a list.
1477 Unfortunately, <c>mirrorselect</c> does not work well behind all routers.
1478 </p>
1480 <pre caption="Using mirrorselect">
1481 <comment>To select a mirror automatically:</comment>
1482 # <i>mirrorselect -a -s4 -o &gt;&gt; /mnt/gentoo/etc/make.conf</i>
1483 <comment>To select a mirror interactively:</comment>
1484 # <i>mirrorselect -i -o &gt;&gt; /mnt/gentoo/etc/make.conf</i>
1485 </pre>
1487 <p>
1488 If for some reason <c>mirrorselect</c> fails you should be able to
1489 continue with this guide since no changes are made.
1490 </p>
1492 </body>
1493 </section>
1494 <section>
1495 <title>Entering the chroot</title>
1496 <body>
1498 <p>
1499 Next, we will <c>chroot</c> over to the new Gentoo Linux build installation to
1500 "enter" the new Gentoo Linux system:
1501 </p>
1503 <note>
1504 You may receive a notice during <c>env-update</c> telling you that
1505 <path>/etc/make.profile/make.defaults</path> isn't available: ignore it. We are
1506 going to issue <c>emerge sync</c> later on in this document, which will resolve
1507 the problem.
1508 </note>
1510 <pre caption="Prepping and entering the chroot environment">
1511 # <i>mount -t proc proc /mnt/gentoo/proc</i>
1512 # <i>cp /etc/resolv.conf /mnt/gentoo/etc/resolv.conf</i>
1513 # <i>chroot /mnt/gentoo /bin/bash</i>
1514 # <i>env-update</i>
1515 Regenerating /etc/ld.so.cache...
1516 # <i>source /etc/profile</i>
1517 <comment>(The above points your shell to the new paths and updated binaries)</comment>
1518 </pre>
1520 <p>
1521 After you execute these commands, you will be "inside" your new Gentoo Linux
1522 environment in <path>/mnt/gentoo</path>. We can perform the rest of the
1523 installation process inside the chroot.
1524 </p>
1526 </body>
1527 </section>
1528 </chapter>
1530 <chapter>
1531 <title>Getting the Current Portage Tree using sync</title>
1532 <section>
1533 <body>
1535 <impo>
1536 If you are doing a GRP install then you can ignore the following section on
1537 <c>emerge sync</c>.
1538 </impo>
1540 <p>
1541 Now, you will need to run <c>emerge sync</c>. This command tells Portage
1542 to download the most recent copy of the Gentoo Linux Portage tree from the
1543 Internet. If you extracted a Portage tree snapshot from <e>CD 1</e> earlier,
1544 you can safely skip this step. The Portage tree contains all the scripts
1545 (called ebuilds) used to build every package under Gentoo Linux. Currently,
1546 we have ebuild scripts for close to 4000 packages. Once <c>emerge sync</c>
1547 completes, you will have a complete Portage tree in
1548 <path>/usr/portage</path>:
1549 </p>
1551 <pre caption="Updating Using sync">
1552 # <i>emerge sync</i>
1553 </pre>
1555 </body>
1556 </section>
1557 </chapter>
1559 <chapter>
1560 <title>Setting Gentoo optimizations (make.conf)</title>
1561 <section>
1562 <body>
1564 <p>
1565 Now that you have a working copy of the Portage tree, it is time to
1566 customize the optimization and optional build-time settings to use on your
1567 Gentoo Linux system. Portage will use these settings when compiling any
1568 programs for you. To do this, edit the file <path>/etc/make.conf</path>. In
1569 this file, you should set your USE flags, which specify optional
1570 functionality that you would like to be built into packages if available;
1571 generally, the defaults (an <e>empty</e> or unset USE variable) are
1572 fine. More information on USE flags can be found <uri
1573 link="http://www.gentoo.org/doc/en/use-howto.xml">here</uri>. A complete list
1574 of current USE flags can be found <uri
1575 link="http://www.gentoo.org/dyn/use-index.xml">here</uri>.
1576 </p>
1578 <p>
1579 If you are starting from a stage1 tarball, You also should set appropriate
1580 CHOST, CFLAGS and CXXFLAGS settings for the kind of system that you are
1581 creating (commented examples can be found further down in the file). If you
1582 are using a stage2 or stage3 tarball, these settings will already be configured
1583 optimally and should not require any modification.
1584 </p>
1586 <warn>
1587 <b>Advanced users:</b> If you are planning on installing an
1588 ACCEPT_KEYWORDS="~x86" Gentoo system, do not set ACCEPT_KEYWORDS until
1589 the bootstrap phase (stage1) is done.
1590 </warn>
1592 <impo>
1593 <b>Advanced users:</b> The CFLAGS and CXXFLAGS settings are used to tell the
1594 C and C++ compiler how to optimize the code that is generated on your system.
1595 It is common for users with Athlon XP processors to specify a
1596 "-march=athlon-xp" setting in their CFLAGS and CXXFLAGS settings so that all
1597 packages built will be optimized for the instruction set and performance
1598 characteristics of their CPU, for example. The <path>/etc/make.conf</path>
1599 file contains a general guide for the proper settings of CFLAGS and CXXFLAGS.
1600 </impo>
1602 <!-- needs qa
1603 <note>
1604 <b>Advanced users:</b>If you are building from a stage1 and don't want
1605 to manually configure CFLAGS and CXXFLAGS, you can use the <c>genflags</c>
1606 utility, which will try to guess accurate flags for your CPU architecture.
1607 Simply type <c>emerge -O genflags</c> and then execute
1608 <c>info2flags</c>. <c>info2flags</c> will suggest CHOST, CFLAGS and
1609 CXXFLAGS settings, which you can then add to
1610 <path>/etc/make.conf</path>.
1611 </note>
1612 -->
1614 <p>
1615 If necessary, you can also set proxy information here if you are behind a
1616 firewall. Use the following command to edit <path>/etc/make.conf</path>
1617 using <c>nano</c>, a simple visual editor:
1618 </p>
1620 <pre caption="Setting make.conf Options">
1621 # <i>nano -w /etc/make.conf</i>
1622 </pre>
1624 <note>
1625 <b>Advanced users:</b> People who need to substantially customize the build
1626 process should take a look at the <path>/etc/make.globals</path> file. This
1627 file comprises gentoo defaults and should never be touched. If the defaults
1628 do not suffice, then new values should be put in <path>/etc/make.conf</path>,
1629 as entries in <path>make.conf</path> <e>override</e> the entries
1630 in <path>make.globals</path>. If you're interested in customizing USE
1631 settings, look in <path>/etc/make.profile/make.defaults</path>.
1632 If you want to turn off any USE settings found here, add an appropriate
1633 <c>USE="-foo"</c> in <path>/etc/make.conf</path> to turn off any <c>foo</c>
1634 USE setting enabled by default in <path>/etc/make.globals</path> or
1635 <path>/etc/make.profile/make.defaults</path>.
1636 </note>
1638 <warn>
1639 Make sure not to add '<c>static</c>' to your USE variables until after
1640 stage1.
1641 </warn>
1643 </body>
1644 </section>
1645 </chapter>
1647 <chapter>
1648 <title>Starting from Stage1</title>
1649 <section>
1650 <body>
1652 <note>
1653 If you are not starting from a stage1 tarball, skip this section.
1654 </note>
1656 <p>
1657 The stage1 tarball is for complete customization and optimization. If you
1658 have picked this tarball, you are most likely looking to have an
1659 uber-optimized and up-to-date system. Have fun! Installing from a stage1
1660 takes a lot of time, but the result is a system that has been optimized
1661 from the ground up for your specific machine and needs.
1662 </p>
1664 <p>
1665 Now, it is time to start the "bootstrap" process. This process takes
1666 about two hours on a 1200MHz AMD Athlon system. During this time, the GNU
1667 C library, compiler suite and other key system programs will be built. Start
1668 the bootstrap as follows:
1669 </p>
1671 <pre caption="Bootstrapping">
1672 # <i>cd /usr/portage</i>
1673 # <i>scripts/bootstrap.sh</i>
1674 </pre>
1676 <p>
1677 The "bootstrap" process will now begin.
1678 </p>
1680 <note>
1681 <c>bootstrap.sh</c> now supports the <c>--fetchonly</c> option. Dial-up
1682 users will find this especially handy. It will download all bootstrap related
1683 files in one go for later compilation. See <c>bootstrap.sh -h</c> for more
1684 information.
1685 </note>
1687 <note>
1688 Portage by default uses <path>/var/tmp</path> during package building,
1689 often using several hundred megabytes of temporary storage. If you would
1690 like to change where Portage stores these temporary files, set a new
1691 PORTAGE_TMPDIR <e>before</e> starting the bootstrap process, as follows:
1692 <pre caption="Changing Portage's Storage Path">
1693 # <i>export PORTAGE_TMPDIR="/otherdir/tmp"</i>
1694 </pre>
1695 </note>
1697 <p>
1698 <c>bootstrap.sh</c> will build <c>binutils</c>, <c>gcc</c>, <c>gettext</c>,
1699 and <c>glibc</c>, rebuilding <c>gettext</c> after <c>glibc</c>. Needless to
1700 say, this process takes a while. Once this process completes, your system
1701 will be equivalent to a "stage2" system, which means you can now move on to
1702 the stage2 instructions.
1703 </p>
1705 </body>
1706 </section>
1707 </chapter>
1709 <chapter>
1710 <title>Starting from Stage2 and continuing Stage1</title>
1711 <section>
1712 <body>
1714 <note>
1715 This section is for those continuing a stage1 install or starting at stage2. If
1716 this is not you (ie. you're using a stage3), then skip this section.
1717 </note>
1719 <warn>
1720 If you start from stage2, don't change the CHOST variable in
1721 <path>/etc/make.conf</path>. Doing so results in strange and
1722 broad compilation failures.
1723 </warn>
1725 <p>
1726 The stage2 tarball already has the bootstrapping done for you. All that you
1727 have to do is install the rest of the system:
1728 </p>
1730 <note>
1731 If you are starting from a pre-built stage2 and want to ensure
1732 that your compiler toolchain is fully up-to-date, add the <c>-u</c>
1733 option to the commands below. If you don't know what this means, it's
1734 safe to skip this suggestion.
1735 </note>
1737 <pre caption="Installing the rest of the system">
1738 # <i>emerge -p system</i>
1739 <comment>(lists the packages to be installed)</comment>
1740 # <i>emerge system</i>
1741 </pre>
1743 <p>
1744 It is going to take a while to finish building the entire base system.
1745 Your reward is that it will be thoroughly optimized for your system.
1746 The drawback is that you have to find a way to keep yourself occupied for
1747 some time to come. The author suggests "Star Wars - Super Bombad Racing"
1748 for the PS2.
1749 </p>
1751 <p>
1752 Building is now complete. Go ahead and skip down to the "Setting
1753 your time zone" section.
1754 </p>
1756 </body>
1757 </section>
1758 </chapter>
1761 <chapter>
1762 <title>Starting from Stage3</title>
1763 <section>
1764 <body>
1766 <note>
1767 This section is for those <b>starting</b> with stage3 and not for those who
1768 have started with stage1 or stage2 who should skip this section. GRP users
1769 should skip ahead to the next section.
1770 </note>
1772 <warn>
1773 Remember, if you start from stage3, don't change the CHOST variable in
1774 <path>/etc/make.conf</path>. Doing so can result in compilation failures.
1775 </warn>
1777 <p>
1778 The stage3 tarball provides a fully-functional basic Gentoo system,
1779 so no building is required.
1780 </p>
1782 <note>
1783 <b>Advanced users:</b> However, since the stage3 tarball is pre-built, it
1784 may be slightly out-of-date. If this is a concern for you, you can
1785 automatically update your existing stage3 to contain the most up-to-date
1786 versions of all system packages by making a backup of
1787 <path>/etc/make.conf</path>, then typing <c>export CONFIG_PROTECT="-*"
1788 emerge -u system</c> (this requires a network connection) and replacing
1789 the backup afterwards. Note that this could take a long time if your stage3 is
1790 very old; otherwise, this process will generally be quick and will allow you
1791 to benefit from the very latest Gentoo updates and fixes. In any case, feel
1792 free to skip these steps and proceed to the next section if you like.
1793 </note>
1795 </body>
1796 </section>
1797 </chapter>
1800 <chapter>
1801 <title>Setting your time zone</title>
1802 <section>
1803 <body>
1805 <p>
1806 Now you need to set your time zone.
1807 </p>
1809 <p>
1810 Look for your time zone (or GMT if you are using Greenwich Mean Time)
1811 in <path>/usr/share/zoneinfo</path>. Then, make a symbolic link to
1812 <path>/etc/localtime</path> by typing:
1813 </p>
1815 <pre caption="Creating a symbolic link for time zone">
1816 # <i>ln -sf /usr/share/zoneinfo/path/to/timezonefile /etc/localtime</i>
1817 </pre>
1819 </body>
1820 </section>
1821 </chapter>
1823 <chapter>
1824 <title>Modifying /etc/fstab for your machine</title>
1825 <section>
1826 <body>
1828 <impo>
1829 To edit files, remember to use <c>nano -w "filename"</c>.
1830 </impo>
1832 <p>
1833 Your Gentoo Linux system is almost ready for use. All we need to do now is
1834 configure a few important system files and install the boot loader.
1835 The first file we need to configure is <path>/etc/fstab</path>. Remember
1836 that you should use the <c>notail</c> option for your boot partition if
1837 you chose to create a ReiserFS filesystem on it. Remember to specify
1838 <c>ext2</c>, <c>ext3</c> or <c>reiserfs</c> filesystem types as appropriate.
1839 </p>
1841 <warn>
1842 Use something like the <path>/etc/fstab</path> listed below, but of course be
1843 sure to replace "BOOT", "ROOT" and "SWAP" with the actual block devices (such
1844 as <c>hda1</c>, etc.) and "ext2" and "ext3" with the actual filesystems you
1845 are using:
1846 </warn>
1848 <pre caption="Editing fstab">
1849 <comment># /etc/fstab: static file system information.
1850 #
1851 # noatime turns off atimes for increased performance (atimes normally aren't
1852 # needed; notail increases performance of ReiserFS (at the expense of storage
1853 # efficiency). It is safe to drop the noatime options if you want and to
1854 # switch between notail and tail freely.
1856 # &lt;fs&gt; &lt;mount point&gt; &lt;type&gt; &lt;opts&gt; &lt;dump/pass&gt;
1858 # NOTE: If your BOOT partition is ReiserFS, add the notail option to opts.
1859 </comment>
1860 /dev/BOOT /boot ext2 noauto,noatime 1 2
1861 /dev/ROOT / ext3 noatime 0 1
1862 /dev/SWAP none swap sw 0 0
1863 /dev/cdroms/cdrom0 /mnt/cdrom iso9660 noauto,ro 0 0
1864 proc /proc proc defaults 0 0
1865 </pre>
1867 <warn>
1868 Please notice that <path>/boot</path> is <e>not</e> mounted at boot time. This
1869 is to protect the data in <path>/boot</path> from corruption. If you need to
1870 access <path>/boot</path>, please mount it!
1871 </warn>
1873 </body>
1874 </section>
1875 </chapter>
1878 <chapter>
1879 <title>Installing the kernel and system logger</title>
1880 <section>
1881 <title>Kernel selections</title>
1882 <body>
1884 <p>
1885 There are two options for installing a kernel. You can either configure your
1886 own kernel or use the <c>genkernel</c> utility to configure and compile your
1887 kernel automatically.
1888 </p>
1890 <p>
1891 Whether configuring a kernel by hand or using <c>genkernel</c>,
1892 you'll need to merge the Linux kernel sources you'd like to use.
1893 Gentoo provides several kernel ebuilds; a list can be found
1894 <uri link="/doc/en/gentoo-kernel.xml">here</uri>. If you are uncertain
1895 which kernel sources to choose, we advise using <c>gentoo-sources</c>.
1896 If you want XFS support, you should choose <c>xfs-sources</c> or
1897 <c>gs-sources</c>. Gentoo's LiveCD uses <c>gs-sources</c> and
1898 <c>xfs-sources</c>. There is also a <c>gaming-sources</c> kernel optimized
1899 for game-playing responsiveness that works wonderfully for this purpose when
1900 the "Preemptible kernel" option is enabled.
1901 </p>
1903 <p>
1904 Choose a kernel and then merge as follows:
1905 </p>
1907 <pre caption="Emerging Kernel Sources">
1908 # <i>emerge -k sys-kernel/gentoo-sources</i>
1909 </pre>
1911 <p>
1912 The <path>/usr/src/linux</path> symbolic link will point to your
1913 newly-installed kernel source tree. Portage uses the
1914 <path>/usr/src/linux</path> symbolic link for a special purpose. Any ebuilds
1915 you install that contain kernel modules will be configured to work with the
1916 kernel source tree pointed to by <path>/usr/src/linux</path>.
1917 <path>/usr/src/linux</path> is created when you emerge your first kernel
1918 source package, but after it exists, Portage does not modify this symbolic
1919 link.
1920 </p>
1922 </body>
1923 </section>
1924 <section>
1925 <title>Using genkernel to compile your kernel</title>
1926 <body>
1928 <p>
1929 Now that your kernel source tree is installed, it's now time to compile your
1930 kernel. There are two ways to do this. The first way is to use our new
1931 <c>genkernel</c> script to automatically build a kernel for you.
1932 <c>genkernel</c> works by configuring a kernel nearly identically to the way
1933 our LiveCD kernel is configured. This means that when you use <c>genkernel</c>
1934 to build your kernel, your system will generally detect all your hardware at
1935 boot-time, just like our Live CD does. Because genkernel doesn't require any
1936 manual kernel configuration, it is an ideal solution for those users who may
1937 not be comfortable compiling their own kernels.
1938 </p>
1940 <p>
1941 Now, let's see how to use genkernel. First, emerge the genkernel ebuild:
1942 </p>
1944 <pre caption="Emerging genkernel">
1945 # <i>emerge -k genkernel</i>
1946 </pre>
1948 <p>
1949 Now, compile your kernel sources by running <c>genkernel</c>:
1950 </p>
1952 <note>
1953 <b>Advanced users:</b> you can type <c>genkernel --config</c> instead,
1954 which will cause genkernel to allow you to tweak the default kernel
1955 configuration before building begins.
1956 </note>
1958 <pre caption="Running genkernel">
1959 <comment>If you're using genkernel 1.2 (included in the 1.4-20030803 x86/i686 GRP set), use the following:</comment>
1960 # <i>genkernel gentoo-sources</i>
1961 <comment>If you're using genkernel 1.4 or newer, there's no need to specify a kernel:</comment>
1962 # <i>genkernel</i>
1963 Gentoo Linux genkernel, version 1.4
1964 Copyright 2003 Gentoo Technologies, Inc., Bob Johnson, Daniel Robbins
1965 Distributed under the GNU General Public License version 2
1967 Settings:
1968 compile optimization: 1 processor(s)
1969 source tree: /usr/src/linux-2.4.20-gaming-r3
1970 config: gentoo (customized)
1971 config loc: /etc/kernels/config-2.4.20-gaming-r3
1972 initrd config: (default) /etc/kernels/settings
1974 * Running "make oldconfig"... [ ok ]
1975 * Logging to /var/log/genkernel.log... [ ok ]
1976 * Starting 2.4.20-gaming-r3 build... [ ok ]
1977 * Running "make dep"... [ ok ]
1978 * Running "make bzImage"... [ ok ]
1979 * Running "make modules"... [ ok ]
1980 * Running "make modules_install"... [ ok ]
1981 * Moving bzImage to /boot/kernel-2.4.20-gaming-r3... [ ok ]
1982 * Building busybox... [ ok ]
1983 * Creating initrd... [ ok ]
1985 * Build completed successfully!
1987 * Please specify /boot/kernel-2.4.20-gaming-r3 and /boot/initrd-2.4.20-gaming-r3
1988 * when customizing your boot loader configuration files.
1989 </pre>
1991 <p>
1992 Once <c>genkernel</c> completes, a kernel, full set of modules and
1993 <e>initial root disk</e> (initrd) will be created. We will use the kernel
1994 and initrd when configuring a boot loader later in this document. Write
1995 down the names of the kernel and initrd as you will need it when writing
1996 the bootloader configuration file. The initrd will be started immediately after
1997 booting to perform hardware autodetection (just like on the Live CD) before
1998 your "real" system starts up.
1999 </p>
2001 <p>
2002 Now, let's perform one more step to get our system to be more like the Live
2003 CD -- let's emerge <c>hotplug</c>. While the initrd autodetects hardware that
2004 is needed to boot your system, <c>hotplug</c> autodetects everything else.
2005 To emerge and enable <c>hotplug</c>, type the following:
2006 </p>
2008 <pre caption="Emerging and enabling hotplug">
2009 # <i>emerge -k hotplug</i>
2010 # <i>rc-update add hotplug default</i>
2011 </pre>
2013 <p>
2014 Now that you've run and configured your system to use <c>genkernel</c>, you
2015 can skip the "manual kernel configuration" section below.
2016 </p>
2018 </body>
2019 </section>
2020 <section>
2021 <title>Manual kernel configuration</title>
2022 <body>
2024 <p>
2025 If you opted not to use genkernel to compile your kernel, this section
2026 will guide you through the process of configuring and compiling a kernel by
2027 hand. Please note that <path>/usr/src/linux</path> is a symlink to your
2028 current emerged kernel source package and is set automatically by Portage at
2029 emerge time. If you have multiple kernel source packages, it is necessary to
2030 set the <path>/usr/src/linux</path> symlink to the correct one before
2031 proceeding.
2032 </p>
2034 <warn>
2035 If you are configuring your own kernel, be careful with the <i>grsecurity</i>
2036 option. Being too aggressive with your security settings can cause certain
2037 programs (such as X) to not run properly. If in doubt, leave it out.
2038 </warn>
2040 <note>
2041 If you want to use the same configuration as the LiveCD kernel or base
2042 your configuration on it, you should execute <c>cd /usr/src/linux &amp;&amp; cat /proc/config > .config &amp;&amp; make oldconfig</c>.
2043 If you aren't using <c>xfs-sources</c>, this will ask some questions
2044 about differences between your kernelchoice and <c>xfs-sources</c>.
2045 </note>
2047 <pre caption="Configuring the Linux Kernel">
2048 # <i>cd /usr/src/linux</i>
2049 # <i>make menuconfig</i>
2050 </pre>
2052 <warn>
2053 For your kernel to function properly, there are several options that you will
2054 need to ensure are in the kernel proper -- that is, they should <e>be enabled
2055 and not compiled as modules</e>. Be sure to enable &quot;ReiserFS&quot; if you
2056 have any ReiserFS partitions; the same goes for &quot;Ext3&quot;. If you're
2057 using XFS, enable the &quot;SGI XFS filesystem support&quot; option. It's
2058 always a good idea to leave ext2 enabled whether you are using it or not.
2059 </warn>
2061 <p>
2062 Below are some common options that you will need:
2063 </p>
2065 <pre caption="make menuconfig options">
2066 Code maturity level options ---&gt;
2067 [*] Prompt for development and/or incomplete code/drivers&quot;
2068 <comment>(You need this to enable some of the options below)</comment>
2069 ...
2071 File systems ---&gt;
2072 &lt;*&gt; Reiserfs support
2073 <comment>(Only needed if you are using reiserfs)</comment>
2074 ...
2075 &lt;*&gt; Ext3 journalling file system support
2076 <comment>(Only needed if you are using ext3)</comment>
2077 ...
2078 [*] Virtual memory file system support (former shm fs)
2079 <comment>(Required for Gentoo Linux)</comment>
2080 ...
2081 &lt;*&gt; JFS filesystem support
2082 <comment>(Only needed if you are using JFS)</comment>
2083 ...
2084 [*] /proc file system support
2085 <comment>(Required for Gentoo Linux)</comment>
2086 [*] /dev file system support (EXPERIMENTAL)
2087 [*] Automatically mount at boot
2088 <comment>(Required for Gentoo Linux)</comment>
2089 [ ] /dev/pts file system for Unix98 PTYs
2090 <comment>(Uncheck this, it is not needed unless you use a 2.6 kernel)</comment>
2091 ...
2092 &lt;*&gt; Second extended fs support
2093 <comment>(Only needed if you are using ext2)</comment>
2094 ...
2095 &lt;*&gt; XFS filesystem support
2096 <comment>(Only needed if you are using XFS)</comment>
2097 </pre>
2099 <p>
2100 If you use PPPoE to connect to Internet, you will need the following
2101 options in the kernel (built-in or as preferably as modules) : &quot;PPP
2102 (point-to-point protocol) support&quot;, &quot;PPP support for async serial
2103 ports&quot;, &quot;PPP support for sync tty ports&quot;. The two compression
2104 options won't harm but are not definitely needed, neither does the &quot;PPP
2105 over Ethernet&quot; option, that might only be used by <c>rp-pppoe</c> when
2106 configured to do kernel mode PPPoE.
2107 </p>
2109 <p>
2110 If you have an IDE cd burner, then you need to enable SCSI emulation in the
2111 kernel. Turn on &quot;ATA/IDE/MFM/RLL support&quot; ---&gt; &quot;IDE, ATA
2112 and ATAPI Block devices&quot; ---&gt; &quot;SCSI emulation support&quot;
2113 (I usually make it a module), then under &quot;SCSI support&quot; enable
2114 &quot;SCSI support&quot;, &quot;SCSI CD-ROM support&quot; and &quot;SCSI
2115 generic support&quot; (again, I usually compile them as modules). If you
2116 also choose to use modules, then <c>echo -e &quot;ide-scsi\nsg\nsr_mod&quot;
2117 &gt;&gt; /etc/modules.autoload.d/kernel-2.4</c> to have them automatically
2118 added at boot time.
2119 </p>
2121 <p>
2122 If you require it, don't forget to include support in the kernel for your
2123 ethernet card.
2124 </p>
2126 <note>
2127 For those who prefer it, it is possible to install Gentoo Linux with a 2.2
2128 kernel. However, doing this comes at a price: you will lose many of the nifty
2129 features that are new to the 2.4 series kernels (such as XFS and tmpfs
2130 filesystems, iptables and more), although the 2.2 kernel sources can be
2131 patched with ReiserFS and devfs support.
2132 Gentoo linux boot scripts require either tmpfs or ramdisk support in the
2133 kernel, so 2.2 kernel users need to make sure that ramdisk support is compiled
2134 in (ie, not a module). It is <comment>vital</comment> that a
2135 <e>gentoo=notmpfs</e> flag be added to the kernel line in
2136 <path>/boot/grub/grub.conf</path> or to the append line in
2137 <path>/etc/lilo.conf</path> for the 2.2 kernel so that a ramdisk is mounted
2138 for the boot scripts instead of tmpfs. If you choose not to use devfs, then
2139 <e>gentoo=notmpfs,nodevfs</e> should be used instead.
2140 </note>
2142 <pre caption = "Compiling and Installing the kernel">
2143 # <i>make dep &amp;&amp; make clean bzImage modules modules_install</i>
2144 # <i>cp /usr/src/linux/arch/i386/boot/bzImage /boot</i>
2145 </pre>
2147 </body>
2148 </section>
2149 <section>
2150 <title>Installing additional hardware-specific ebuilds</title>
2151 <body>
2153 <p>
2154 Finally, you should emerge ebuilds for any additional hardware that is on
2155 your system. Here is a list of kernel-related ebuilds that you could emerge:
2156 </p>
2158 <table>
2159 <tcolumn width="1in"/>
2160 <tcolumn width="4in"/>
2161 <tcolumn width="2in"/>
2162 <tr>
2163 <th>Ebuild</th>
2164 <th>Purpose</th>
2165 <th>Command</th>
2166 </tr>
2167 <tr>
2168 <ti>nvidia-kernel</ti>
2169 <ti>Accelerated NVIDIA graphics for XFree86</ti>
2170 <ti><c>emerge -k nvidia-kernel</c></ti>
2171 </tr>
2172 <tr>
2173 <ti>nforce-net</ti>
2174 <ti>On-board ethernet controller on NVIDIA NForce(2) motherboards</ti>
2175 <ti><c>emerge nforce-net</c></ti>
2176 </tr>
2177 <tr>
2178 <ti>nforce-audio</ti>
2179 <ti>On-board audio on NVIDIA NForce(2) motherboards</ti>
2180 <ti><c>emerge nforce-audio</c></ti>
2181 </tr>
2182 <tr>
2183 <ti>e100</ti>
2184 <ti>Intel e100 Fast Ethernet Adapters</ti>
2185 <ti><c>emerge e100</c></ti>
2186 </tr>
2187 <tr>
2188 <ti>e1000</ti>
2189 <ti>Intel e1000 Gigabit Ethernet Adapters</ti>
2190 <ti><c>emerge e1000</c></ti>
2191 </tr>
2192 <tr>
2193 <ti>emu10k1</ti>
2194 <ti>Creative Sound Blaster Live!/Audigy support</ti>
2195 <ti><c>emerge emu10k1</c></ti>
2196 </tr>
2197 <tr>
2198 <ti>ati-drivers</ti>
2199 <ti>Accelerated ATI Radeon 8500+/FireGL graphics for XFree86</ti>
2200 <ti><c>emerge ati-drivers</c></ti>
2201 </tr>
2202 <tr>
2203 <ti>xfree-drm</ti>
2204 <ti>Accelerated graphics for ATI Radeon up to 9200, Rage128, Matrox, Voodoo and other cards for XFree86</ti>
2205 <ti><c>VIDEO_CARDS="yourcard" emerge xfree-drm</c></ti>
2206 </tr>
2207 </table>
2209 <p>
2210 The <c>nvidia-kernel</c>, <c>ati-drivers</c> and <c>xfree-drm</c> packages
2211 will require additional configuration to be enabled. All other ebuilds listed
2212 above should be auto-detected at boot-time by the <c>hotplug</c> package. If
2213 you are not using hotplug, be sure to add the appropriate modules to
2214 <path>/etc/modules.autoload.d/kernel-2.4</path>.
2215 </p>
2217 <p>
2218 More information on <c>xfree-drm</c> can be found in our <uri
2219 link="/doc/en/dri-howto.xml">Direct Rendering Guide</uri>.
2220 </p>
2223 </body>
2224 </section>
2225 <section>
2226 <title>Installing a system logger</title>
2227 <body>
2229 <p>
2230 Your new custom kernel (and modules) are now installed. Now you need to choose
2231 a system logger that you would like to install. We offer sysklogd, which is
2232 the traditional set of system logging daemons. We also have msyslog and
2233 syslog-ng as well as metalog. If in doubt, you may want to try
2234 syslog-ng, since it is very flexible and feature-rich. To merge your logger of
2235 choice, type <e>one</e> of the next four command sets:
2236 </p>
2238 <pre caption="Emerging System Logger of Choice">
2239 # <i>emerge -k app-admin/sysklogd</i>
2240 # <i>rc-update add sysklogd default</i>
2241 <comment>or</comment>
2242 # <i>emerge -k app-admin/syslog-ng</i>
2243 # <i>rc-update add syslog-ng default</i>
2244 <comment>or</comment>
2245 # <i>emerge -k app-admin/metalog</i>
2246 # <i>rc-update add metalog default</i>
2247 <comment>or</comment>
2248 # <i>emerge -k app-admin/msyslog</i>
2249 # <i>rc-update add msyslog default</i>
2250 </pre>
2252 <impo>
2253 If you chose <c>metalogd</c>, please read <uri link="faq.xml#doc_chap6_sect3">this FAQ</uri> on metalogd's buffering.
2254 </impo>
2256 <p>
2257 Now, you may optionally choose a cron package that you would like to use.
2258 Right now, we offer dcron, fcron and vcron. If you do not know which one to
2259 choose, you might as well grab vcron.
2260 </p>
2262 <pre caption="Choosing a CRON Daemon">
2263 # <i>emerge -k sys-apps/dcron</i>
2264 # <i>rc-update add dcron default</i>
2265 # <i>crontab /etc/crontab</i>
2266 <comment>or</comment>
2267 # <i>emerge -k sys-apps/fcron</i>
2268 # <i>rc-update add fcron default</i>
2269 # <i>crontab /etc/crontab</i>
2270 <comment>or</comment>
2271 # <i>emerge -k sys-apps/vcron</i>
2272 # <i>rc-update add vcron default</i>
2273 <comment>You do not need to run <i>crontab /etc/crontab</i> if using vcron.</comment>
2274 </pre>
2276 <p>
2277 For more information on starting programs and daemons at startup, see the
2278 <uri link="/doc/en/rc-scripts.xml">rc-script guide</uri>.
2279 </p>
2281 </body>
2282 </section>
2283 </chapter>
2285 <chapter>
2286 <title>Installing miscellaneous necessary packages</title>
2287 <section>
2288 <body>
2290 <p>
2291 If you need rp-pppoe to connect to the net, be aware that at this point
2292 it has not been installed. It would be the good time to do it:
2293 </p>
2295 <pre caption="Installing rp-pppoe">
2296 # <i>USE="-X" emerge rp-pppoe</i>
2297 <comment>GRP users should type the following:</comment>
2298 # <i>emerge -K rp-pppoe</i>
2299 </pre>
2301 <note>
2302 The <i>USE="-X"</i> prevents pppoe from installing its optional X interface,
2303 which is a good thing, because X and its dependencies would also be emerged.
2304 You can always recompile <i>rp-pppoe</i> with X support later. The GRP version
2305 of rp-pppoe has the optional X interface enabled. If you're not using GRP, compile from
2306 source as in the first example.
2307 </note>
2308 <!-- this pkg is a candidate for moving from .tbz2 to distfiles/ (source) -->
2311 <note>
2312 Please note that the rp-pppoe is built but not configured. You will have to
2313 do it again using <c>adsl-setup</c> when you boot into your Gentoo system
2314 for the first time.
2315 </note>
2317 <p>
2318 You may need to install some additional packages in the Portage tree
2319 if you are using any optional features like XFS, ReiserFS or LVM. If you're
2320 using XFS, you should emerge the <c>xfsprogs</c> package:
2321 </p>
2323 <pre caption="Emerging Filesystem Tools">
2324 # <i>emerge -k xfsprogs</i>
2325 <comment>If you would like to use ReiserFS, you should emerge the ReiserFS tools: </comment>
2326 # <i>emerge -k reiserfsprogs</i>
2327 <comment>If you would like to use JFS, you should emerge the JFS tools: </comment>
2328 # <i>emerge -k jfsutils</i>
2329 <comment>If you're using LVM, you should emerge the <c>lvm-user</c> package: </comment>
2330 # <i>emerge -k lvm-user</i>
2331 </pre>
2333 <p>
2334 If you're a laptop user and wish to use your PCMCIA slots on your first
2335 real reboot, you will want to make sure you install the <i>pcmcia-cs</i>
2336 package.
2337 </p>
2339 <pre caption="Emerging PCMCIA-cs">
2340 # <i>emerge -k sys-apps/pcmcia-cs</i>
2341 </pre>
2343 <!-- fix the bug or fix the docs, don't send the user in circles
2344 (drobbins)
2345 <warn>You will have to re-emerge <i>pcmcia-cs</i> after installation to get PCMCIA
2346 to work.
2347 </warn>
2348 -->
2350 </body>
2351 </section>
2352 </chapter>
2354 <chapter>
2355 <title>User Management</title>
2356 <section>
2357 <title>Setting a root password</title>
2358 <body>
2360 <p>
2361 Before you forget, set the root password by typing:
2362 </p>
2364 <pre caption="Setting the root Password">
2365 # <i>passwd</i>
2366 </pre>
2368 </body>
2369 </section>
2370 <section>
2371 <title>Adding a user for day-to-day use</title>
2372 <body>
2374 <p>
2375 Working as root on a Unix/Linux system is <e>dangerous</e> and
2376 should be avoided as much as possible. Therefor it is <e>strongly</e>
2377 recommended to add a user for day-to-day use:
2378 </p>
2380 <pre caption = "Adding a user">
2381 # <i>useradd your_user -m -G users,wheel,audio -s /bin/bash</i>
2382 # <i>passwd your_user</i>
2383 </pre>
2385 <p>
2386 Substitute <c>your_user</c> with your username.
2387 </p>
2389 <p>
2390 Whenever you need to perform some task that only root can handle,
2391 use <c>su -</c> to change your privileges to root-privileges, or take
2392 a look at the <c>sudo</c> package.
2393 </p>
2395 </body>
2396 </section>
2397 </chapter>
2399 <chapter>
2400 <title>Setting your Hostname</title>
2401 <section>
2402 <body>
2404 <p>
2405 Edit <path>/etc/hostname</path> so that it contains your hostname
2406 on a single line, i.e. <c>mymachine</c>.
2407 </p>
2409 <pre caption="Configuring Hostname">
2410 # <i>echo mymachine &gt; /etc/hostname</i>
2411 </pre>
2413 <p>
2414 Then edit <path>/etc/dnsdomainname</path> so that it contains your DNS
2415 domainname, i.e. <c>mydomain.com</c>.
2416 </p>
2418 <pre caption="Configuring Domainname">
2419 # <i>echo mydomain.com &gt; /etc/dnsdomainname</i>
2420 </pre>
2422 <p>
2423 If you have a NIS domain, you should set it in
2424 <path>/etc/nisdomainname</path>.
2425 </p>
2427 <pre caption="Configuring NIS Domainname">
2428 # <i>echo nis.mydomain.com &gt; /etc/nisdomainname</i>
2429 </pre>
2431 </body>
2432 </section>
2433 </chapter>
2436 <chapter>
2437 <title>Modifying /etc/hosts</title>
2438 <section>
2439 <body>
2441 <p>
2442 This file contains a list of IP addresses and their associated hostnames.
2443 It is used by the system to resolve the IP addresses of any hostnames that
2444 may not be in your nameservers. Here is a template for this file:
2445 </p>
2447 <pre caption="Hosts Template">
2448 localhost
2449 <comment># the next line contains your IP for your local LAN and your associated machine name</comment>
2450 mymachine.mydomain.com mymachine
2451 </pre>
2453 <note>
2454 If you are on a DHCP network, it might be helpful to add your
2455 machine's actual hostname after <i>localhost</i>. This will help
2456 GNOME and many other programs in name resolution.
2457 </note>
2459 </body>
2460 </section>
2461 </chapter>
2464 <chapter>
2465 <title>Final Network Configuration</title>
2466 <section>
2467 <title>Loading the Kernel Modules</title>
2468 <body>
2470 <p>
2471 Add the names of any modules that are necessary for the proper functioning of
2472 your system to <path>/etc/modules.autoload.d/kernel-2.4</path> file (you can
2473 also add any options you need to the same line). When Gentoo Linux boots, these
2474 modules will be automatically loaded. Of particular importance is your
2475 ethernet card module, if you happened to compile it as a module:
2476 </p>
2478 <pre caption="/etc/modules.autoload.d/kernel-2.4">
2479 <comment>This is assuming that you are using a 3com card.
2480 Check /lib/modules/&lt;kernel version&gt;/kernel/drivers/net for your card. </comment>
2481 3c59x
2482 </pre>
2484 </body>
2485 </section>
2486 <section>
2487 <title>Configuring the Network Interfaces</title>
2488 <body>
2490 <p>
2491 Edit the <path>/etc/conf.d/net</path> script to get your network configured
2492 for your first boot.
2493 </p>
2495 <pre caption="Boot time Network Configuration">
2496 # <i>nano -w /etc/conf.d/net</i>
2497 </pre>
2499 <p>
2500 If you want eth0 to automatically receive its IP, set <c>iface_eth0</c>
2501 to <e>dhcp</e>. Otherwise fill in your IP, broadcast address and
2502 netmask. If you have several interfaces, do the same for <c>iface_eth1</c>,
2503 <c>iface_eth2</c> etc.
2504 </p>
2506 <p>
2507 Now add the <c>net.eth0</c> initscript to the default runlevel <e>if</e>
2508 it isn't a PCMCIA network card:
2509 </p>
2511 <pre caption="Automatically start the network interfaces during boot">
2512 # <i>rc-update add net.eth0 default</i>
2513 </pre>
2515 <p>
2516 If you have multiple network cards or tokenring interfaces, you need to create
2517 additional <path>net.eth</path><comment>x</comment> or
2518 <path>net.tr</path><comment>x</comment> scripts respectively for each one
2519 (<comment>x</comment> = 1, 2, ...):
2520 </p>
2522 <pre caption="Multiple Network Interfaces">
2523 # <i>cd /etc/init.d</i>
2524 # <i>ln -s net.eth0 net.eth<comment>x</comment></i>
2525 </pre>
2527 <p>
2528 Now for each created initscript, add it to the default runlevel (again
2529 only if it isn't a PCMCIA network card):
2530 </p>
2532 <pre caption = "Adding net.ethx to the default runlevel">
2533 # <i>rc-update add net.eth<comment>x</comment> default</i>
2534 </pre>
2536 </body>
2537 </section>
2538 <section>
2539 <title>Only for PCMCIA Users</title>
2540 <body>
2542 <p>
2543 If you have a PCMCIA card installed, have a quick look into
2544 <path>/etc/conf.d/pcmcia</path> to verify that things seem all right for
2545 your setup, then run the following command:
2546 </p>
2548 <pre caption = "Have PCMCIA services start automatically">
2549 # <i>rc-update add pcmcia boot</i>
2550 </pre>
2552 <p>
2553 This makes sure that the PCMCIA drivers are autoloaded whenever your network
2554 is loaded. The appropriate <path>/etc/init.d/net.eth*</path> services
2555 will be started by the pcmcia service automatically.
2556 </p>
2558 </body>
2559 </section>
2560 </chapter>
2562 <chapter>
2563 <title>Final steps: Configure Basic Settings (including the international keymap setting)</title>
2564 <section>
2565 <body>
2567 <pre caption="Basic Configuration">
2568 # <i>nano -w /etc/rc.conf</i>
2569 </pre>
2571 <p>
2572 Follow the directions in the file to configure the basic settings. All users
2573 will want to make sure that CLOCK is set to his/her liking. International
2574 keyboard users will want to set the KEYMAP variable (browse
2575 <path>/usr/share/keymaps</path> to see the various possibilities).
2576 </p>
2578 </body>
2579 </section>
2580 </chapter>
2582 <chapter>
2583 <title>Configure a Bootloader</title>
2584 <section>
2585 <title>Notes</title>
2586 <body>
2588 <p>
2589 In the spirit of Gentoo, users now have more than one bootloader to choose
2590 from. Using our virtual package system, users are now able to choose between
2591 both GRUB and LILO as their bootloaders.
2592 </p>
2594 <p>
2595 Please keep in mind that having both bootloaders installed is not necessary.
2596 In fact, it can be a hindrance, so please only choose one.
2597 </p>
2599 <p>
2600 In addition, you will need to configure our bootloader differently depending
2601 upon whether you are using <c>genkernel</c> (with kernel and initrd) or a
2602 kernel you compiled by hand. Be sure to take note of the important
2603 differences.
2604 </p>
2606 </body>
2607 </section>
2608 <section>
2609 <title>Configuring GRUB</title>
2610 <body>
2612 <p>
2613 The most critical part of understanding GRUB is getting comfortable with how
2614 GRUB refers to hard drives and partitions. Your Linux partition
2615 <path>/dev/hda1</path> is called <path>(hd0,0)</path> under GRUB. Notice the
2616 parenthesis around the hd0,0 - they are required. Hard drives count from zero
2617 rather than "a" and partitions start at zero rather than one. Be aware too
2618 that with the hd devices, only hard drives are counted, not atapi-ide devices
2619 such as cdrom players, burners and that the same construct can be used with
2620 scsi drives. (Normally they get higher numbers than ide drives except when the
2621 bios is configured to boot from scsi devices.) Assuming you have a hard drive
2622 on <path>/dev/hda</path>, a cdrom player on <path>/dev/hdb</path>, a burner on
2623 <path>/dev/hdc</path>, a second hard drive on <path>/dev/hdd</path> and no
2624 SCSI hard drive, <path>/dev/hdd7</path> gets translated to
2625 <path>(hd1,6)</path>. It might sound tricky and tricky it is indeed, but as
2626 we will see, GRUB offers a tab completion mechanism that comes handy for
2627 those of you having a lot of hard drives and partitions and who are a little
2628 lost in the GRUB numbering scheme. Having gotten the feel for that, it is
2629 time to install GRUB.
2630 </p>
2632 <p>
2633 The easiest way to install GRUB is to simply type <c>grub</c> at your chrooted
2634 shell prompt:
2635 </p>
2637 <pre caption="Installing GRUB">
2638 # <i>emerge -k grub</i>
2639 # <i>grub</i>
2640 </pre>
2642 <p>
2643 You will be presented with the <e>grub&gt;</e> grub command-line prompt.
2644 Now, you need to type in the right commands to install the GRUB boot record
2645 onto your hard drive. In my example configuration, I want to install the GRUB
2646 boot record on my hard drive's MBR (master boot record), so that the first
2647 thing I see when I turn on the computer is the GRUB prompt. In my case, the
2648 commands I want to type are:
2649 </p>
2651 <pre caption="GRUB on the MBR">
2652 grub&gt; <i>root (hd0,0)</i> <comment>(Your boot partition)</comment>
2653 grub&gt; <i>setup (hd0)</i> <comment>(Where the boot record is installed; here, it is the MBR)</comment>
2654 </pre>
2656 <pre caption="GRUB not on the MBR">
2657 <comment>Alternatively, if you wanted to install the bootloader somewhere other than the MBR:</comment>
2658 grub&gt; <i>root (hd0,0)</i> <comment>(Your boot partition)</comment>
2659 grub&gt; <i>setup (hd0,4)</i> <comment>(Where the boot record is installed; here it is /dev/hda5)</comment>
2660 grub&gt; <i>quit</i>
2661 </pre>
2663 <p>
2664 Here is how the two commands work. The first <c>root ( )</c> command tells
2665 GRUB the location of your boot partition (in our example,
2666 <path>/dev/hda1</path> or <path>(hd0,0)</path> in GRUB terminology. Then, the
2667 second <c>setup ( )</c> command tells GRUB where to install the boot record -
2668 it will be configured to look for its special files at the <c>root ( )</c>
2669 location that you specified. In my case, I want the boot record on the MBR
2670 of the hard drive, so I simply specify <path>/dev/hda</path> (also known as
2671 <path>(hd0)</path>). If I were using another boot loader and wanted to set up
2672 GRUB as a secondary boot-loader, I could install GRUB to the boot record of
2673 a particular partition. In that case, I would specify a particular partition
2674 rather than the entire disk. Once the GRUB boot record has been successfully
2675 installed, you can type <c>quit</c> to quit GRUB.
2676 </p>
2678 <note>
2679 The tab completion mechanism of GRUB can be used from within GRUB,
2680 assuming you wrote <c> root (</c> and that you hit the TAB key, you would
2681 be prompted with a list of the available devices (not only hard drives),
2682 hitting the TAB key having written <c> root (hd</c>, GRUB would print the
2683 available hard drives and hitting the TAB key after writing <c> root (hd0,</c>
2684 would make GRUB print the list of partitions on the first hard drive.
2685 Checking the syntax of the GRUB location with completion should really help
2686 to make the right choice.
2687 </note>
2689 <p>
2690 Gentoo Linux is now installed, but we need to create the
2691 <path>/boot/grub/grub.conf</path> file so that we get a nice GRUB boot menu
2692 when the system reboots. Here is how to do it.
2693 </p>
2695 <impo>
2696 To ensure backwards compatibility with GRUB, make sure to make a link from
2697 <path>grub.conf</path> to <path>menu.lst</path>. You can do this by typing
2698 <c>ln -s /boot/grub/grub.conf /boot/grub/menu.lst</c>.
2699 </impo>
2701 <p>
2702 Now, create the <path>grub.conf</path> file (<c>nano -w
2703 /boot/grub/grub.conf</c>) and add the following to it:
2704 </p>
2706 <pre caption="grub.conf for GRUB">
2707 default 0
2708 timeout 30
2709 splashimage=(hd0,0)/boot/grub/splash.xpm.gz
2711 <comment># If you compiled your own kernel, use something like this:</comment>
2712 title=My example Gentoo Linux
2713 root (hd0,0)
2714 kernel (hd0,0)/boot/bzImage root=/dev/hda3
2716 <comment># If you're using genkernel, use something like this instead:</comment>
2717 title=My example Gentoo Linux (genkernel)
2718 root (hd0,0)
2719 kernel (hd0,0)/boot/kernel-KV root=/dev/hda3
2720 initrd (hd0,0)/boot/initrd-KV
2722 <comment># Below needed only for people who dual-boot</comment>
2723 title=Windows XP
2724 root (hd0,5)
2725 chainloader (hd0,5)+1
2726 </pre>
2728 <warn>
2729 Substitute <c>KV</c> with the kernel version you have installed.
2730 </warn>
2732 <note>
2733 (hd0,0) should be written without any spaces inside the parentheses.
2734 </note>
2736 <impo>
2737 If you set up SCSI emulation for an IDE cd burner earlier, then to get it to
2738 actually work you need to add an <c>hdx=ide-scsi</c> fragment to the kernel
2739 line in <path>grub.conf</path> (where "hdx" should be the device for your cd
2740 burner).
2741 </impo>
2743 <p>
2744 After saving this file, Gentoo Linux installation is complete. Selecting the
2745 first option will tell GRUB to boot Gentoo Linux without a fuss. The second
2746 part of the <path>grub.conf</path> file is optional and shows you how to use
2747 GRUB to boot a bootable Windows partition.
2748 </p>
2750 <note>
2751 Above, <path>(hd0,0)</path> should point to your "boot" partition
2752 (<path>/dev/hda1</path> in our example config) and <path>/dev/hda3</path>
2753 should point to your root filesystem. <path>(hd0,5)</path> contains the NT
2754 boot loader.
2755 </note>
2757 <note>
2758 The path to the kernel image is relative to the boot partition. If for
2759 example you have separated boot partition <path>(hd0,0)</path> and root
2760 partition <path>(hd0,1)</path>, all paths in the <path>grub.conf</path> file
2761 above will become <path>/bzImage</path>.
2762 </note>
2764 <p>
2765 If you need to pass any additional options to the kernel, simply add them to
2766 the end of the <c>kernel</c> command. We're already passing one option
2767 (<c>root=/dev/hda3</c>), but you can pass others as well. In particular, you
2768 can turn off devfs by default (not recommended unless you know what you're
2769 doing) by adding the <c>gentoo=nodevfs</c> option to the <c>kernel</c>
2770 command.
2771 </p>
2773 <note>
2774 Unlike in earlier versions of Gentoo Linux, you no longer have to add
2775 <c>devfs=mount</c> to the end of the <c>kernel</c> line to enable devfs.
2776 Now devfs is enabled by default.
2777 </note>
2779 </body>
2780 </section>
2781 <section>
2782 <title>Configuring LILO</title>
2783 <body>
2785 <p>
2786 While GRUB may be the new alternative for most people, it is not always the
2787 best choice. LILO, the LInuxLOader, is the tried and true workhorse of Linux
2788 bootloaders. Here is how to install LILO if you would like to use it instead
2789 of GRUB.
2790 </p>
2792 <p>
2793 The first step is to emerge LILO:
2794 </p>
2796 <pre caption="Emerging LILO">
2797 # <i>emerge -k lilo</i>
2798 </pre>
2800 <p>
2801 Now it is time to configure LILO. Here is a sample configuration file
2802 <path>/etc/lilo.conf</path>:
2803 </p>
2805 <pre caption="Example lilo.conf">
2806 boot=/dev/hda
2807 map=/boot/map
2808 install=/boot/boot.b
2809 prompt
2810 timeout=50
2811 lba32
2812 default=linux
2814 <comment># Use something like the following 4 lines if you compiled your kernel yourself</comment>
2815 image=/boot/bzImage
2816 label=linux
2817 read-only
2818 root=/dev/hda3
2820 <comment># If you used genkernel, use something like this:</comment>
2821 image=/boot/kernel-KV
2822 label=gk_linux
2823 root=/dev/hda3
2824 initrd=/boot/initrd-KV
2825 append="root=/dev/hda3 init=/linuxrc"
2828 <comment># For dual booting windows/other OS</comment>
2829 other=/dev/hda1
2830 label=dos
2831 </pre>
2833 <warn>
2834 Substitute <c>KV</c> with the kernel version you have installed, and
2835 make sure that <c>default=</c> points to your label (<c>gk_linux</c> if
2836 you used genkernel).
2837 </warn>
2839 <ul>
2840 <li><c>boot=/dev/hda</c> tells LILO to install itself on the first hard disk on the first IDE controller.</li>
2841 <li><c>map=/boot/map</c> states the map file. In normal use, this should not be modified. </li>
2842 <li><c>install=/boot/boot.b</c> tells LILO to install the specified file as the new boot sector. In normal use, this should not be altered. If the install line is missing, LILO will assume a default of <path>/boot/boot.b</path> as the file to be used. </li>
2843 <li>The existence of <c>prompt</c> tells LILO to display the classic <e>lilo:</e> prompt at bootup. While it is not recommended that you remove the prompt line, if you do remove it, you can still get a prompt by holding down the [Shift] key while your machine starts to boot. </li>
2844 <li><c>timeout=50</c> sets the amount of time that LILO will wait for user input before proceeding with booting the default line entry. This is measured in tenths of a second, with 50 as the default. </li>
2845 <li><c>lba32</c> describes the hard disk geometry to LILO. Another common entry here is linear. You should not change this line unless you are very aware of what you are doing. Otherwise, you could put your system in an unbootable state. </li>
2846 <li><c>default=linux</c> refers to the default operating system for LILO to boot from the options listed below this line. The name linux refers to the label line below in each of the boot options. </li>
2847 <li><c>image=/boot/bzImage</c> specifies the linux kernel to boot with this particular boot option. </li>
2848 <li><c>label=linux</c> names the operating system option in the LILO screen. In this case, it is also the name referred to by the default line. </li>
2849 <li><c>read-only</c> specifies that the root partition (see the root line below) is read-only and cannot be altered during the boot process. </li>
2850 <li><c>root=/dev/hda3</c> tells LILO what disk partition to use as the root partition. </li>
2851 </ul>
2853 <p>
2854 After you have edited your <path>lilo.conf</path> file, it is time to run LILO
2855 to load the information into the MBR:
2856 </p>
2858 <pre caption="Running LILO">
2859 # <i>/sbin/lilo</i>
2860 </pre>
2862 <p>
2863 LILO is configured and now your machine is ready to boot into Gentoo Linux!
2864 </p>
2866 </body>
2867 </section>
2869 <section>
2870 <title>Using framebuffer</title>
2871 <body>
2873 <p>
2874 People who have selected framebuffer in their kernel should add <c>vga=xxx</c>
2875 to their bootloader configuration file. <c>xxx</c> is one of the values in the
2876 following table:
2877 </p>
2879 <table>
2880 <tcolumn width="1in"/>
2881 <tcolumn width="1in"/>
2882 <tcolumn width="1in"/>
2883 <tcolumn width="1in"/>
2884 <tr><ti></ti><th>640x480</th><th>800x600</th><th>1024x768</th><th>1280x1024</th></tr>
2885 <tr><th>8 bpp</th><ti>769</ti><ti>771</ti><ti>773</ti><ti>775</ti></tr>
2886 <tr><th>16 bpp</th><ti>785</ti><ti>788</ti><ti>791</ti><ti>794</ti></tr>
2887 <tr><th>32 bpp</th><ti>786</ti><ti>789</ti><ti>792</ti><ti>795</ti></tr>
2888 </table>
2890 <p>
2891 LILO-users will have to add <c>vga=xxx</c> on top of their configuration
2892 file.
2893 </p>
2895 <p>
2896 GRUB-users will have to append <c>vga=xxx</c> to the <c>kernel
2897 (hd0,0)...</c> line.
2898 </p>
2900 </body>
2901 </section>
2902 </chapter>
2904 <chapter>
2905 <title>Creating Bootdisks</title>
2906 <section>
2907 <title>GRUB Bootdisks</title>
2908 <body>
2910 <impo>
2911 Don't forget to insert a floppy in your floppydrive before proceeding.
2912 </impo>
2914 <p>
2915 It is always a good idea to make a boot disk the first
2916 time you install any Linux distribution. This is a security
2917 blanket and generally not a bad thing to do. If your hardware doesn't
2918 let you install a working bootloader from the chrooted environment,
2919 you may <e>need</e> to make a GRUB boot disk.
2920 If you are in this camp, make a GRUB boot disk and when you reboot
2921 the first time you can install GRUB to the MBR. Make your bootdisks
2922 like this:
2923 </p>
2925 <pre caption="Creating a GRUB Bootdisk">
2926 # <i>cd /usr/share/grub/i386-pc/</i>
2927 # <i>cat stage1 stage2 > /dev/fd0</i>
2928 </pre>
2930 <p>
2931 Now reboot and load the floppy. At the floppy's <c>grub&gt;</c> prompt, you
2932 can now execute the necessary <c>root</c> and <c>setup</c> commands.
2933 </p>
2935 </body>
2936 </section>
2937 <section>
2938 <title>LILO Bootdisks</title>
2939 <body>
2941 <impo>
2942 Don't forget to insert a floppy in your floppydrive before proceeding.
2943 </impo>
2945 <p>
2946 If you are using LILO, it is also a good idea to make a bootdisk:
2947 </p>
2949 <pre caption="Making a Bootdisk">
2950 # <i>dd if=/boot/your_kernel of=/dev/fd0 </i>
2951 <comment>(This will only work if your kernel is smaller than 1.4MB)</comment>
2952 </pre>
2954 </body>
2955 </section>
2956 </chapter>
2958 <chapter>
2959 <title>Using GRP</title>
2960 <section>
2961 <body>
2963 <p>
2964 GRP users can, at this point, install binary packages:
2965 </p>
2967 <pre caption="Installing from GRP">
2968 # <i>emerge -k xfree</i>
2969 </pre>
2971 <p>
2972 CD 1 contains enough applications to install a working system with XFree86.
2973 Additionally, CD2 of the 2-CD GRP set contains other applications including
2974 KDE, GNOME, Mozilla and others. To install these packages, you will need to
2975 reboot into your new Gentoo system first (covered in the "Installation
2976 complete!" section near the end of this document). After you are running your
2977 basic Gentoo system from the hard drive, you can mount the second CD and copy
2978 files:
2979 </p>
2981 <pre caption="Loading binary packages from CD2">
2982 # <i>mount /dev/cdrom /mnt/cdrom</i>
2983 # <i>cp -a /mnt/cdrom/packages/* /usr/portage/packages/</i>
2984 </pre>
2986 <p>
2987 Now various other applications can be installed the same way. For example:
2988 </p>
2990 <pre caption="Installing KDE from GRP">
2991 # <i>emerge -k kde</i>
2992 </pre>
2994 </body>
2995 </section>
2996 </chapter>
2998 <chapter>
2999 <title>Installation Complete!</title>
3000 <section>
3001 <body>
3003 <p>
3004 Now, Gentoo Linux is installed. The only remaining step is to update necessary
3005 configuration files, exit the chrooted shell, safely unmount your partitions
3006 and reboot the system:
3007 </p>
3009 <warn>
3010 <c>etc-update</c> can provide you with a list of configuration files
3011 that have newer versions at your disposal. Verify that none of the
3012 configuration files have a big impact (such as <path>/etc/fstab</path>,
3013 <path>/etc/make.conf</path>, <path>/etc/rc.conf</path>, ...). Merge the
3014 files that don't have such a big impact, remove the updates of the
3015 others or view the diff and manually update the configuration file.
3016 </warn>
3018 <pre caption="Rebooting the System">
3019 # <i>etc-update</i>
3020 # <i>exit</i>
3021 <comment>(This exits the chrooted shell; you can also type <i>^D</i>)</comment>
3022 # <i>cd / </i>
3023 # <i>umount /mnt/gentoo/boot</i>
3024 # <i>umount /mnt/gentoo/proc</i>
3025 # <i>umount /mnt/gentoo</i>
3026 # <i>reboot</i>
3027 <comment>(Don't forget to remove the bootable CD)</comment>
3028 </pre>
3030 <note>
3031 After rebooting, it is a good idea to run the <c>modules-update</c> command to
3032 create the <path>/etc/modules.conf</path> file. Instead of modifying this
3033 file directly, you should generally make changes to the files in
3034 <path>/etc/modules.d</path>.
3035 </note>
3037 <p>
3038 If you have any questions or would like to get involved with Gentoo Linux
3039 evelopment, consider joining our gentoo-user and gentoo-dev mailing lists
3040 (more information on our <uri
3041 link="http://www.gentoo.org/main/en/lists.xml">mailing lists</uri> page).
3042 We also have a handy <uri
3043 link="http://www.gentoo.org/doc/en/desktop.xml">Desktop configuration
3044 guide</uri> that will help you to continue configuring your new Gentoo Linux
3045 system and a useful <uri
3046 link="http://www.gentoo.org/doc/en/portage-user.xml">Portage user guide</uri>
3047 to help familiarize you with Portage basics. You can find the rest of the
3048 Gentoo Documentation <uri
3049 link="http://www.gentoo.org/main/en/docs.xml">here</uri>. If you have any
3050 other questions involving installation or anything for that matter, please
3051 check the Gentoo Linux <uri
3052 link="http://www.gentoo.org/doc/en/faq.xml">FAQ</uri>. Enjoy and welcome to
3053 Gentoo Linux!
3054 </p>
3056 </body>
3057 </section>
3058 </chapter>
3060 <!--
3061 Gentoo Stats is down currently. Commenting out for the
3062 time being. I've also changed double-dash to dash-space-dash
3063 because otherwise commenting fails.
3064 <chapter>
3065 <title>Gentoo-Stats</title>
3066 <section>
3067 <body>
3069 <p>
3070 The Gentoo Linux usage statistics program was started as an attempt to give
3071 the developers a way to find out about their user base. It collects information
3072 about Gentoo Linux usage to help us in set priorities our development.
3073 Installing it is completely optional and it would be greatly appreciated if
3074 you decide to use it. Compiled statistics can be viewed at
3075 <uri>http://stats.gentoo.org/</uri>.
3076 </p>
3078 <p>
3079 The gentoo-stats server will assign a unique ID to your system.
3080 This ID is used to make sure that each system is counted only once. The ID
3081 will not be used to individually identify your system, nor will it be matched
3082 against an IP address or other personal information. Every precaution has been
3083 taken to assure your privacy in the development of this system. The following
3084 are the things that we are monitoring right now through our "gentoo-stats"
3085 program:
3086 </p>
3088 <ul>
3089 <li>installed packages and their version numbers</li>
3090 <li>CPU information: speed (MHz), vendor name, model name, CPU flags (like "mmx" or "3dnow")</li>
3091 <li>memory information (total available physical RAM, total available swap space)</li>
3092 <li>PCI cards and network controller chips</li>
3093 <li>the Gentoo Linux profile your machine is using (that is, where the <path>/etc/make.profile</path> link is pointing to).</li>
3094 </ul>
3096 <p>
3097 We are aware that disclosure of sensitive information is a threat to most
3098 Gentoo Linux users (just as it is to the developers).
3099 </p>
3101 <ul>
3102 <li>Unless you modify the gentoo-stats program, it will never transmit sensitive information such as your passwords, configuration data, shoe size...</li>
3103 <li>Transmission of your e-mail addresses is optional and turned off by default.</li>
3104 <li>The IP address your data transmission originates from will never be logged in such a way that we can identify you. There are no "IP address/system ID" pairs.</li>
3105 </ul>
3107 <p>
3108 The installation is easy - just run the following commands:
3109 </p>
3111 <pre caption="Installing gentoo-stats">
3112 # <i>emerge gentoo-stats</i> <comment>(Installs gentoo-stats)</comment>
3113 # <i>gentoo-stats - -new</i> <comment>(Obtains a new system ID)</comment>
3114 </pre>
3116 <p>
3117 The second command above will request a new system ID and enter it into
3118 <path>/etc/gentoo-stats/gentoo-stats.conf</path> automatically. You can view
3119 this file to see additional configuration options.
3120 </p>
3122 <p>
3123 After that, the program should be run on a regular schedule (gentoo-stats does
3124 not have to be run as root). Add this line to your <path>crontab</path>:
3125 </p>
3127 <pre caption="Updating gentoo-stats with cron">
3128 0 0 * * 0,4 /usr/sbin/gentoo-stats - -update &gt; /dev/null
3129 </pre>
3131 <p>
3132 The <c>gentoo-stats</c> program is a simple perl script which can be
3133 viewed with your favorite pager or editor: <path>/usr/sbin/gentoo-stats</path>.
3134 </p>
3136 </body>
3137 </section>
3138 </chapter>
3140 -->
3142 <chapter>
3143 <title>Gentoo On Less-Common Hardware</title>
3144 <section>
3145 <title>Hardware ATA RAID</title>
3146 <body>
3148 <p>
3149 Users who want to install Gentoo on Hardware ATA RAID must pay
3150 attention to the next steps in order for them to succesfully
3151 install Gentoo Linux:
3152 </p>
3154 <ul>
3155 <li>Be sure to start the LiveCD with the <c>doataraid</c> kerneloption.</li>
3156 <li>If you've forgotten to select <c>doataraid</c> during bootup, or the modules mysteriously didn't load, load them as needed:
3157 <pre caption = "Loading RAID modules">
3158 # <i>modprobe ataraid</i>
3159 <comment>For Promise Raid Controllers:</comment>
3160 # <i>modprobe pdcraid</i>
3161 <comment>For Highpoint Raid Controllers:</comment>
3162 # <i>modprobe hptraid</i>
3163 </pre></li>
3164 <li>Some ATA RAID Controllers require you to reboot after partitioning; formatting will otherwise fail.</li>
3165 <li>Before chrooting, mount the devicetree into the new environment:
3166 <pre caption = "Mounting /dev into /mnt/gentoo/dev">
3167 # <i>mount -o bind /dev /mnt/gentoo/dev</i>
3168 </pre></li>
3169 <li>During kernel configuration, select the required RAID options:
3170 <pre caption = "RAID in the Linux Kernel Configuration">
3171 <comment>For Highpoint RAID controllers:</comment>
3172 ATA/IDE/MFM/RLL support ---&gt;
3173 [*] HPT36X/37X chipset support
3174 [*] Support for IDE Raid controllers
3175 [*] Highpoint 370 software RAID
3176 <comment>For Promise RAID controllers:</comment>
3177 ATA/IDE/MFM/RLL support ---&gt;
3178 [*] PROMISE PDC202{46|62|65|67} support
3179 <comment>and/or</comment>
3180 [*] PROMISE PDC202{68|69|70|71|75|76|77} support
3181 [*] Support for IDE Raid controllers
3182 [*] Support Promise software RAID (Fasttrak(tm))
3183 </pre></li>
3184 <li>When using GRUB add <c>--stage2=/boot/grub/stage2</c> when running <c>grub</c> to the <c>setup</c> command:
3185 <pre caption = "Installing GRUB for Hardware RAID systems">
3186 grub&gt; <i>root (hd0,0)</i>
3187 grub&gt; <i>setup --stage2=/boot/grub/stage2 (hd0)</i>
3188 grub&gt; <i>quit</i>
3189 </pre>
3190 Also, in the GRUB configuration be sure to point the <c>root</c>
3191 to the appropriate RAID device:
3192 <pre caption = "grub.conf for RAID">
3193 title=My Gentoo Linux on RAID
3194 root (hd0,0)
3195 kernel (hd0,0)/boot/bzImage root=/dev/ataraid/dXpY
3196 </pre></li>
3197 <li>LILO users should set the <c>root</c> option to the appropriate RAID device:
3198 <pre caption = "lilo.conf for RAID">
3199 image=/boot/bzImage
3200 label=linux
3201 read-only
3202 root=/dev/ataraid/dXpY
3203 </pre></li>
3204 </ul>
3206 <p>
3207 If you still have problems installing Gentoo Linux on your Hardware
3208 RAID, be sure to report them on <uri>http://bugs.gentoo.org</uri>.
3209 </p>
3211 <p>
3212 Thanks for using Gentoo Linux, and have fun with your new installation!
3213 </p>
3216 </body>
3217 </section>
3218 </chapter>
3219 </guide>

  ViewVC Help
Powered by ViewVC 1.1.20