/[gentoo]/xml/htdocs/doc/en/handbook/hb-install-ppc-medium.xml
Gentoo

Contents of /xml/htdocs/doc/en/handbook/hb-install-ppc-medium.xml

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1.14 - (show annotations) (download) (as text)
Sat Jul 3 09:07:55 2004 UTC (11 years, 1 month ago) by swift
Branch: MAIN
Changes since 1.13: +4 -35 lines
File MIME type: application/xml
#53032 - Move out burning instructions to the Gentoo FAQ. Keep the cdrecord/k3b instructions though

1 <?xml version='1.0' encoding='UTF-8'?>
2 <!DOCTYPE sections SYSTEM "/dtd/book.dtd">
3
4 <!-- The content of this document is licensed under the CC-BY-SA license -->
5 <!-- See http://creativecommons.org/licenses/by-sa/1.0 -->
6
7 <!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-ppc-medium.xml,v 1.13 2004/06/11 07:56:04 swift Exp $ -->
8
9 <sections>
10 <section>
11 <title>Hardware Requirements</title>
12 <subsection>
13 <title>Introduction</title>
14 <body>
15
16 <p>
17 Before we start, we first list what hardware requirements you need to
18 successfully install Gentoo on your box. This of course depends on your
19 architecture.
20 </p>
21
22 </body>
23 </subsection>
24 <subsection>
25 <title>The PPC Architecture</title>
26 <body>
27
28 <p>
29 Check the following requirements before you
30 continue with the Gentoo installation:
31 </p>
32
33 <ul>
34 <li>
35 You need at least 1 Gb of free disk space
36 </li>
37 <li>
38 If you do not use prebuilt packages, you need at least 300 Mb of memory (RAM +
39 swap)
40 </li>
41 <li>
42 For the <e>PowerPC architecture</e>, you can install Gentoo/PPC on machines
43 having a Power or PowerPC microprocessor, including but not limited to G3, G4
44 or G5 powered Apple computers such as the iMac, the iBook, the PowerBook,
45 Xserve, PowerMac, and bPlan's Pegasos I and II... We also provide limited
46 support for oldworld systems, IBM (rs/6000, iSeries, pSeries, ...) and Amiga
47 systems. Be sure to read up on the <uri link="/doc/en/gentoo-ppc-faq.xml">Gentoo
48 PPC FAQ</uri> too before you begin.
49 </li>
50 </ul>
51
52 </body>
53 </subsection>
54 </section>
55 <section>
56 <title>Make your Choice</title>
57 <subsection>
58 <title>Introduction</title>
59 <body>
60
61 <p>
62 Still interested in trying out Gentoo? Well, then it is now time to
63 choose the installation medium you want to use. Yes, you have the
64 choice, no, they are not all equal, and yes, the result is always the same: a
65 Gentoo base system.
66 </p>
67
68 <p>
69 The installation media we will describe are:
70 </p>
71
72 <ul>
73 <li>Gentoo's Minimal LiveCD</li>
74 <li>Gentoo's Universal LiveCD</li>
75 </ul>
76
77 <p>
78 Every single media has its advantages and disadvantages. We will list
79 the pros and cons of every medium so you have all the information to
80 make a justified decision. But before we continue, let's explain our
81 three-stage installation.
82 </p>
83
84 </body>
85 </subsection>
86 <subsection>
87 <title>The Three Stages</title>
88 <body>
89
90 <p>
91 Gentoo Linux can be installed using one of three <e>stage</e> tarball files.
92 The one you choose depends on how much of the system you want to compile
93 yourself. The <e>stage1</e> tarball is used when you want to bootstrap and
94 build the entire system from scratch. The <e>stage2</e> tarball is used for
95 building the entire system from a bootstrapped &quot;semi-compiled&quot; state.
96 The <e>stage3</e> tarball already contains a basic Gentoo Linux system that has
97 been built for you. As we will explain later, you can also install
98 Gentoo without compiling anything (except your kernel and some optional
99 packages). If you want this, you have to use a <e>stage3</e> tarball.
100 </p>
101
102 <p>
103 Now what stage do you have to choose?
104 </p>
105
106 <p>
107 Starting from a <e>stage1</e> allows you to have total control over the
108 optimization settings and optional build-time functionality that is
109 initially enabled on your system. This makes <e>stage1</e> installs good for
110 power users who know what they are doing. It is also a great
111 installation method for those who would like to know more about the
112 inner workings of Gentoo Linux.
113 </p>
114
115 <p>
116 A <e>stage1</e> installation can only be performed when you have a working
117 Internet connection.
118 </p>
119
120 <table>
121 <tr>
122 <th>Stage1</th>
123 <th>Pros and Cons</th>
124 </tr>
125 <tr>
126 <th>+</th>
127 <ti>
128 Allows you to have total control over the optimization settings and optional
129 build-time functionality that is initially enabled on your system
130 </ti>
131 </tr>
132 <tr>
133 <th>+</th>
134 <ti>Suitable for powerusers that know what they are doing</ti>
135 </tr>
136 <tr>
137 <th>+</th>
138 <ti>Allows you to learn more about the inner workings of Gentoo</ti>
139 </tr>
140 <tr>
141 <th>-</th>
142 <ti>Takes a long time to finish the installation</ti>
143 </tr>
144 <tr>
145 <th>-</th>
146 <ti>
147 If you don't intend to tweak the settings, it is probably a waste of time
148 </ti>
149 </tr>
150 <tr>
151 <th>-</th>
152 <ti>
153 Not suitable for networkless installations
154 </ti>
155 </tr>
156 </table>
157
158 <p>
159 <e>Stage2</e> installs allow you to skip the bootstrap process and doing this
160 is fine if you are happy with the optimization settings that we chose
161 for your particular <e>stage2</e> tarball.
162 </p>
163
164 <p>
165 A <e>stage2</e> installation can only be performed when you have a working
166 Internet connection.
167 </p>
168
169 <table>
170 <tr>
171 <th>Stage2</th>
172 <th>Pros and Cons</th>
173 </tr>
174 <tr>
175 <th>+</th>
176 <ti>You don't need to bootstrap</ti>
177 </tr>
178 <tr>
179 <th>+</th>
180 <ti>Faster than starting with stage1</ti>
181 </tr>
182 <tr>
183 <th>+</th>
184 <ti>You can still tweak your settings</ti>
185 </tr>
186 <tr>
187 <th>-</th>
188 <ti>You cannot tweak as much as with a stage1</ti>
189 </tr>
190 <tr>
191 <th>-</th>
192 <ti>It's not the fastest way to install Gentoo</ti>
193 </tr>
194 <tr>
195 <th>-</th>
196 <ti>You have to accept the optimizations we chose for the bootstrap</ti>
197 </tr>
198 <tr>
199 <th>-</th>
200 <ti>
201 Not suitable for networkless installations
202 </ti>
203 </tr>
204 </table>
205
206 <p>
207 Choosing to go with a <e>stage3</e> allows for the fastest install of Gentoo
208 Linux, but also means that your base system will have the optimization
209 settings that we chose for you (which to be honest, are good settings
210 and were carefully chosen to enhance performance while maintaining
211 stability). <e>stage3</e> is also required if you want to install Gentoo using
212 prebuilt packages or without a network connection.
213 </p>
214
215 <table>
216 <tr>
217 <th>Stage3</th>
218 <th>Pros and Cons</th>
219 </tr>
220 <tr>
221 <th>+</th>
222 <ti>Fastest way to get a Gentoo base system</ti>
223 </tr>
224 <tr>
225 <th>+</th>
226 <ti>Suitable for networkless installations</ti>
227 </tr>
228 <tr>
229 <th>-</th>
230 <ti>You cannot tweak the base system - it's built already</ti>
231 </tr>
232 <tr>
233 <th>-</th>
234 <ti>You cannot brag about having used stage1 or stage2</ti>
235 </tr>
236 </table>
237
238 <p>
239 Write down (or remember) what stage you want to use. You need this later when
240 you decide what LiveCD (or other installation medium) you want to use. You might
241 be interested to know that, if you decide to use different optimization settings
242 after having installed Gentoo, you will be able to recompile your entire system
243 with the new optimization settings.
244 </p>
245
246 <p>
247 Now take a look at the available installation media.
248 </p>
249
250 </body>
251 </subsection>
252 <subsection>
253 <title>Gentoo LiveCDs</title>
254 <body>
255
256 <p>
257 The <e>Gentoo LiveCDs</e> are bootable CDs which contain a
258 self-sustained Gentoo environment. They allow you to boot Linux from the CD.
259 During the boot process your hardware is detected and the appropriate drivers
260 are loaded. They are maintained by Gentoo developers.
261 </p>
262
263 <p>
264 All LiveCDs allow you to boot, setup networking, initialize your
265 partitions and start installing Gentoo from the Internet. However, some
266 LiveCDs also contain all necessary source code so you are able to install
267 Gentoo without a working network configuration.
268 </p>
269
270 <p>
271 Now what do these LiveCDs contain?
272 </p>
273
274 </body>
275 </subsection>
276 <subsection>
277 <title>Gentoo's Minimal LiveCD</title>
278 <body>
279
280 <p>
281 This is a small, no-nonsense, bootable CD which sole purpose is to boot the
282 system, prepare the networking and continue with the Gentoo installation. It
283 does not contain any stages (or, in some cases, a single stage1 file),
284 source code or precompiled packages. For example the ppc variant of this
285 LiveCD can be found in the <path>universal</path> subdirectory and is called
286 <c>install-ppc-minimal-2004.1.iso</c>.
287 </p>
288
289 <table>
290 <tr>
291 <th>Minimal LiveCD</th>
292 <th>Pros and Cons</th>
293 </tr>
294 <tr>
295 <th>+</th>
296 <ti>Smallest download</ti>
297 </tr>
298 <tr>
299 <th>+</th>
300 <ti>Suitable for a complete architecture</ti>
301 </tr>
302 <tr>
303 <th>+</th>
304 <ti>
305 You can do a stage1, stage2 or stage3 by getting the stage tarball off the
306 net
307 </ti>
308 </tr>
309 <tr>
310 <th>-</th>
311 <ti>
312 Contains no stages, no portage snapshot, no GRP packages and therefore not
313 suitable for networkless installation
314 </ti>
315 </tr>
316 </table>
317
318 </body>
319 </subsection>
320 <subsection>
321 <title>Gentoo's Universal LiveCD</title>
322 <body>
323
324 <p>
325 Gentoo's Universal LiveCD is a bootable CD suitable to install Gentoo without
326 networking. It contains a stage1 and several stage3 tarballs (optimized for the
327 individual subarchitectures). For example the ppc variant of this CD is called
328 <c>install-ppc-universal-2004.1.iso</c> and can be found in the
329 <path>universal</path> subdirectory.
330 </p>
331
332 <p>
333 If you take a closer look on our mirrors, you will see
334 that we provide <e>Gentoo Package CDs</e>. This CD (which isn't
335 bootable) only contains precompiled packages and can be used to install software
336 after a succesfull Gentoo Installation. To install Gentoo, you only
337 need the Universal LiveCD, but if you want OpenOffice.org, Mozilla, KDE, GNOME
338 etc. without having to compile every single one of them, you need the Packages
339 CD too. For example the G4 (a subarchitecture of ppc) Packages CD is
340 called <c>packages-g4-2004.1.iso</c> and can be found in the appropriate
341 subdirectory (<path>g4/</path>).
342 </p>
343
344 <p>
345 You only need the Packages CD if you want to perform a stage3 with GRP
346 installation.
347 </p>
348
349 <table>
350 <tr>
351 <th>Universal LiveCD with Packages CD</th>
352 <th>Pros and Cons</th>
353 </tr>
354 <tr>
355 <th>+</th>
356 <ti>Packages CD is optimized to your architecture and subarchitecture</ti>
357 </tr>
358 <tr>
359 <th>+</th>
360 <ti>
361 Packages CD provides precompiled packages for fast Gentoo installations
362 </ti>
363 </tr>
364 <tr>
365 <th>+</th>
366 <ti>
367 Contains everything you need. You can even install without a network
368 connection.
369 </ti>
370 </tr>
371 <tr>
372 <th>-</th>
373 <ti>Huge download</ti>
374 </tr>
375 </table>
376
377 </body>
378 </subsection>
379 </section>
380 <section>
381 <title>Download, Burn and Boot a Gentoo LiveCD</title>
382 <subsection>
383 <title>Downloading and Burning the LiveCDs</title>
384 <body>
385
386 <p>
387 You have chosen to use a Gentoo LiveCD (if not, then you are reading the
388 wrong section). We'll first start by downloading and burning the chosen
389 LiveCD. We previously discussed the several available LiveCDs, but where can you
390 find them?
391 </p>
392
393 <p>
394 Visit one of our <uri
395 link="/main/en/mirrors.xml">mirrors</uri> and go to
396 <path>releases/ppc/2004.1/livecd/universal</path>, which is
397 the path where the LiveCD(s) of your choice are located. Inside that
398 directory you'll find so-called ISO-files. Those are full CD images
399 which you can write on a CD-R.
400 </p>
401
402 <p>
403 In case you wonder if your downloaded file is corrupted or not, you can
404 check its MD5 checksum and compare it with the MD5 checksum we provide (such as
405 <path>install-ppc-minimal-2004.1.iso.md5</path>). You can check the MD5 checksum
406 with the <c>md5sum</c> tool under Linux/Unix or <uri
407 link="http://www.md5summer.org">md5summer</uri> for Windows.
408 </p>
409
410 <p>
411 Another way to check the validity of the downloaded file is to use GnuPG to
412 verify the cryptographic signature that we provide (the file ending with
413 <path>.asc</path>). Download the signature file and obtain the public key:
414 </p>
415
416 <pre caption="Obtaining the public key">
417 $ <i>gpg --keyserver pgp.mit.edu --recv-keys 19462D47</i>
418 </pre>
419
420 <p>
421 Now verify the signature:
422 </p>
423
424 <pre caption="Verify the cryptographic signature">
425 $ <i>gpg --verify &lt;signature file&gt; &lt;downloaded iso&gt;</i>
426 <comment>(If everything goes well, you should see something like this:)</comment>
427 gpg: Signature made Mon Apr 19 18:54:40 2004 EDT using DSA key ID 19462D47
428 gpg: Good signature from "John Davis (Gentoo Linux Developer) &lt;zhen@gentoo.org&gt;"
429 gpg: aka "Gentoo Linux Release Engineering &lt;releng@gentoo.org&gt;"
430 </pre>
431
432 <p>
433 To burn the downloaded ISO(s), you have to select raw-burning. How you
434 do this is highly program-dependent. We will discuss <c>cdrecord</c> and
435 <c>K3B</c> here; more information can be found in our <uri
436 link="/doc/en/faq.xml#isoburning">Gentoo FAQ</uri>.
437 </p>
438
439 <ul>
440 <li>
441 With cdrecord, you simply type <c>cdrecord dev=/dev/hdc</c> (replace
442 <path>/dev/hdc</path> with your CD-RW drive's device path) followed
443 by the path to the ISO file :)
444 </li>
445 <li>
446 With K3B, select <c>Tools</c> &gt; <c>CD</c> &gt; <c>Burn Image</c>. Then
447 you can locate your ISO file within the 'Image to Burn' area. Finally click
448 <c>Start</c>.
449 </li>
450 </ul>
451
452 </body>
453 </subsection>
454 </section>
455 <section>
456 <title>Booting the PPC LiveCD(s)</title>
457 <subsection>
458 <title>Default: Apple/IBM</title>
459 <body>
460
461 <p>
462 Place the LiveCD in the CD-ROM and reboot the system. Hold down the 'C' key at
463 bootup (or run an OldWorld bootloader like BootX or quik). You will be greeted
464 by a friendly welcome message and a <e>boot:</e> prompt at the bottom of the
465 screen.
466 </p>
467
468 <p>
469 At this prompt you are able to select a kernel for the subarchitecture you use.
470 We provide <c>G3</c>, <c>G3-SMP</c>, <c>G4</c>, <c>G4-SMP</c>, <c>G5</c>,
471 <c>G5-SMP</c> and <c>G</c>. The various <c>-SMP</c> kernels are needed if your
472 system has multiple CPUs.
473 </p>
474
475 <p>
476 You are also able to tweak some kernel options at this prompt. The following
477 table lists the available boot options you can add:
478 </p>
479
480 <table>
481 <tr>
482 <th>Boot Option</th>
483 <th>Description</th>
484 </tr>
485 <tr>
486 <ti><c>video</c></ti>
487 <ti>
488 This option takes one of the following vendor-specific tags:
489 <c>radeonfb</c>, <c>rivafb</c>, <c>atyfb</c>, <c>aty128</c> or
490 <c>ofonly</c>. You can follow this tag with the resolution and refreshrate
491 you want to use. For instance <c>video=radeonfb:1280x1024@75</c>. If you are
492 uncertain what to choose, <c>ofonly</c> will most certainly work.
493 </ti>
494 </tr>
495 <tr>
496 <ti><c>nol3</c></ti>
497 <ti>
498 Disables level 3 cache on some powerbooks (needed for at least the 17'')
499 </ti>
500 </tr>
501 <tr>
502 <ti><c>debug</c></ti>
503 <ti>
504 Enables verbose booting, spawns an initrd shell that can be used to debug
505 the LiveCD
506 </ti>
507 </tr>
508 <tr>
509 <ti><c>sleep=X</c></ti>
510 <ti>
511 Wait X seconds before continuing; this can be needed by some very old SCSI
512 CD-ROMs which don't speed up the CD quick enough
513 </ti>
514 </tr>
515 <tr>
516 <ti><c>bootfrom=X</c></ti>
517 <ti>
518 Boot from a different device
519 </ti>
520 </tr>
521 </table>
522
523 <p>
524 At this prompt, hit enter, and a complete Gentoo Linux environment will be
525 loaded from the CD. Continue with <uri link="#booted">And When You're
526 Booted...</uri>.
527 </p>
528
529 </body>
530 </subsection>
531 <subsection>
532 <title>Alternative: Pegasos</title>
533 <body>
534
535 <p>
536 On the Pegasos simply insert the CD and at the SmartFirmware boot-prompt type
537 <c>boot cd /boot/pegasos root=/dev/ram0 init=/linuxrc looptype=gcloop
538 cdroot</c>. If you need any special boot options you can append them to the
539 command-line. For instance <c>boot cd /boot/pegasos root=/dev/ram0
540 init=/linuxrc looptype=gcloop cdroot video=radeonfb:1280x1024@75 mem=256M</c>.
541 </p>
542
543 </body>
544 </subsection>
545 <subsection id="booted">
546 <title>And When You're Booted...</title>
547 <body>
548
549 <p>
550 You will be greeted by a root ("#") prompt on the current console. You can also
551 switch to other consoles by pressing Alt-fn-F2, Alt-fn-F3 and Alt-fn-F4. Get
552 back to the one you started on by pressing Alt-fn-F1.
553 </p>
554
555 <p>
556 If you are installing Gentoo on a system with a non-US keyboard, use
557 <c>loadkeys</c> to load the keymap for your keyboard. To list the available
558 keymaps, execute <c>ls /usr/share/keymaps/i386</c>.
559 </p>
560
561 <pre caption="Listing available keymaps">
562 <comment>(PPC uses x86 keymaps on most systems. The mac/ppc keymaps provided
563 on the LiveCD are ADB keymaps and unusable with the LiveCD kernel)</comment>
564 # <i>ls /usr/share/keymaps/i386</i>
565 </pre>
566
567 <p>
568 Now load the keymap of your choice:
569 </p>
570
571 <pre caption="Loading a keymap">
572 # <i>loadkeys be-latin1</i>
573 </pre>
574
575 <p>
576 Now continue with <uri link="#hardware">Extra Hardware Configuration</uri>.
577 </p>
578
579 </body>
580 </subsection>
581 <subsection id="hardware">
582 <title>Extra Hardware Configuration</title>
583 <body>
584
585 <p>
586 When the Live CD boots, it tries to detect all your hardware devices and
587 loads the appropriate kernel modules to support your hardware. In the
588 vast majority of cases, it does a very good job. However, in some cases (the
589 SPARC LiveCDs don't even do autodetection), it may not auto-load the kernel
590 modules you need. If the PCI auto-detection missed some of your system's
591 hardware, you will have to load the appropriate kernel modules manually.
592 </p>
593
594 <p>
595 In the next example we try to load the <c>8139too</c> module (support for
596 certain kinds of network interfaces):
597 </p>
598
599 <pre caption="Loading kernel modules">
600 # <i>modprobe 8139too</i>
601 </pre>
602
603 </body>
604 </subsection>
605 <subsection>
606 <title>Optional: Tweaking Hard Disk Performance</title>
607 <body>
608
609 <p>
610 If you are an advanced user, you might want to tweak the IDE hard disk
611 performance using <c>hdparm</c>. With the <c>-tT</c> options you can
612 test the performance of your disk (execute it several times to get a
613 more precise impression):
614 </p>
615
616 <pre caption="Testing disk performance">
617 # <i>hdparm -tT /dev/hda</i>
618 </pre>
619
620 <p>
621 To tweak, you can use any of the following examples (or experiment
622 yourself) which use <path>/dev/hda</path> as disk (substitute with your
623 disk):
624 </p>
625
626 <pre caption="Tweaking hard disk performance">
627 <comment>Activate DMA:</comment> # <i>hdparm -d 1 /dev/hda</i>
628 <comment>Activate DMA + Safe Performance-enhancing Options:</comment> # <i>hdparm -d 1 -A 1 -m 16 -u 1 -a 64 /dev/hda</i>
629 </pre>
630
631 </body>
632 </subsection>
633 <subsection>
634 <title>Optional: User Accounts</title>
635 <body>
636
637 <p>
638 If you plan on giving other people access to your installation
639 environment or you want to chat using <c>irssi</c> without root privileges (for
640 security reasons), you need to create the necessary user accounts and change
641 the root password.
642 </p>
643
644 <p>
645 To change the root password, use the <c>passwd</c> utility:
646 </p>
647
648 <pre caption="Changing the root password">
649 # <i>passwd</i>
650 New password: <comment>(Enter your new password)</comment>
651 Re-enter password: <comment>(Re-enter your password)</comment>
652 </pre>
653
654 <p>
655 To create a user account, we first enter their credentials, followed by
656 its password. We use <c>useradd</c> and <c>passwd</c> for these tasks.
657 In the next example, we create a user called &quot;john&quot;.
658 </p>
659
660 <pre caption="Creating a user account">
661 # <i>useradd john</i>
662 # <i>passwd john</i>
663 New password: <comment>(Enter john's password)</comment>
664 Re-enter password: <comment>(Re-enter john's password)</comment>
665 </pre>
666
667 <p>
668 You can change your user id from root to the newly created user by using
669 <c>su</c>:
670 </p>
671
672 <pre caption="Changing user id">
673 # <i>su john -</i>
674 </pre>
675
676 </body>
677 </subsection>
678 <subsection>
679 <title>Optional: Starting the SSH Daemon</title>
680 <body>
681
682 <p>
683 If you want to allow other users to access your computer during the
684 Gentoo installation (perhaps because those users are going to help you
685 install Gentoo, or even do it for you), you need to create a user
686 account for them and perhaps even provide them with your root password
687 (<e>only</e> do that <e>if</e> you <b>fully trust</b> that user).
688 </p>
689
690 <p>
691 To fire up the SSH daemon, execute the following command:
692 </p>
693
694 <pre caption="Starting the SSH daemon">
695 # <i>/etc/init.d/sshd start</i>
696 </pre>
697
698 <p>
699 To be able to use sshd, you first need to setup your networking. Continue with
700 the chapter on <uri link="?part=1&amp;chap=3">Configuring your Network</uri>.
701 </p>
702
703 </body>
704 </subsection>
705 </section>
706 </sections>

  ViewVC Help
Powered by ViewVC 1.1.20