/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1313 - (hide annotations) (download)
Thu Feb 23 21:01:02 2006 UTC (9 years, 3 months ago) by agaffney
File size: 69669 byte(s)
only keep a 1000 line 'scrollback' buffer for the compile output and log file

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1313 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.602 2006/02/23 21:01:02 agaffney Exp $
5 codeman 773
6 agaffney 1313 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
7     only keep a 1000 line 'scrollback' buffer for the compile output and log file
8 agaffney 791
9 agaffney 1306 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
10     src/GLIPortage.py:
11     add code make GLIPortage.py capable of being run stand-along for dynamic
12     stage3 generation and copying packages in a GRP-ish way
13 agaffney 1311 grp code fixups
14 agaffney 1306
15 agaffney 1305 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
16     src/GLIPortage.py:
17     ignore blank packages passed to get_deps() and emerge()
18    
19 agaffney 1304 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
20     src/GLIUtility.py:
21     add get_chosts() function
22    
23 agaffney 1306 *GLI-0.3 (12 Feb 2006)
24    
25 agaffney 1302 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
26     src/templates/x86ArchitectureTemplate.py:
27     pull old start/end sector values from somewhere that actually has them
28     add logic for extended partition to code that makes sure new end sector
29     doesn't overlap start sector of next partitions
30 agaffney 1303 don't freak out if partition can't be deleted
31 agaffney 1302
32 agaffney 1297 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
33     src/GLIPortage.py:
34     run env-update at the end of copy_pkg_to_chroot()
35    
36 agaffney 1295 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
37     src/templates/x86ArchitectureTemplate.py:
38     I'm a complete fscking dumbass. I recorded the end sector for partitions that
39     weren't being touched, but I never used it when recreating them...the end was
40     calculated from the size in MB instead :/
41    
42 agaffney 1288 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
43     src/GLIArchitectureTemplate.py:
44     pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
45 agaffney 1294 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
46 agaffney 1291 src/GLIPortage.py:
47     use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
48     src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
49     'resized' flag
50 agaffney 1288
51 agaffney 1285 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
52     src/GLIPortage.py:
53     short circuit and check vdb directly if package begins with '='
54    
55 codeman 1284 8 Feb 2006; Preston Cody <codeman@gentoo.org>
56     added more packages to extra_packages list in IP
57    
58 agaffney 1277 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
59     src/templates/x86ArchitectureTemplate.py:
60     10 tries to create filesystem instead of 3
61 agaffney 1280 src/GLIPortage, src/GLIArchitectureTemplate.py:
62     ignore_missing flag for copy_pkg_to_chroot()
63 agaffney 1277
64 agaffney 1269 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
65     src/GLIPortage.py:
66     copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
67    
68 agaffney 1264 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
69     src/net/server/gliserv.py:
70     fix handling of 404 for real files
71     src/net/server/GLIServerProfile.py:
72     look for 'hostname' in attributes instead of 'name'
73    
74 agaffney 1257 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
75     src/SimpleXMLParser.py:
76     initial support for 'include' in XML files
77 agaffney 1258 src/GLIStorageDevice.py:
78     initial support for %
79 agaffney 1259 src/GLIClientController.py:
80     add debugging statements to pre-install steps
81 agaffney 1257
82 codeman 1253 15 Jan 2006; Preston Cody <codeman@gentoo.org>
83     webgli/configfiles:
84     check for key in etc_files['rc.conf'] to fix key error
85     webgli/timezone: small fix.
86 codeman 1254 webgli/extrapackages: list-type fix
87     webgli/services: same
88     glimd: add/edit_client updates.
89 codeman 1253
90 codeman 1248 12 Jan 2006; Preston Cody <codeman@gentoo.org>
91     added configure.pyhtml to glimd. minor changes
92     to top and add_client. fixed up showargs.
93 codeman 1250 added execute.pyhtml
94     changed register clients line in gliserv for name->hostname.
95     updated TODO.
96 codeman 1248
97 codeman 1246 10 Jan 2006; Preston Cody <codeman@gentoo.org>
98     src/net/server/*:
99     added add/del/edit client/profile.pythml for glimd.
100     updated templates, showclients, and gliserv.
101    
102 agaffney 1245 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
103     src/net/server/*:
104     stupid threading module...
105    
106 codeman 1241 8 Jan 2006; Preston Cody <codeman@gentoo.org>
107     AT: rc.conf -> conf.d/clock
108    
109 agaffney 1223 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
110     src/GLIPortage.py:
111     show 'Calculating dependencies for ...' in subprogress bar at beginning of
112     emerge()
113     src/GLIArchitectureTemplate.py:
114     copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
115     in the chroot
116 agaffney 1228 remove _quickpkg_deps() and _portage_best_{visible,version}()
117 agaffney 1225 src/GLIUtility.py:
118     fail immediately in validate_uri() if provided URI can't be parsed
119 agaffney 1233 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
120 agaffney 1239 debug code in spawn()
121     use lower-level os.read() instead of file.read() because python sucks
122 agaffney 1227 src/templates/x86ArchitectureTemplate.py:
123     basic subprogress reporting for partitioning
124 agaffney 1231 total_steps was 1 too high
125 agaffney 1223
126 agaffney 1221 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
127     src/GLIUtility.py:
128     move parse_vdb_contents() to GLIPortage
129     src/GLIPortage.py:
130     remove all symlink fixups
131 agaffney 1222 ignore 'dir' entries in CONTENTS
132     call tar with -p
133 agaffney 1221
134 codeman 1220 5 Jan 2006; Preston Cody <codeman@gentoo.org>
135     AT: bootsplash is now gensplash
136     gliserv: add advanced_mode to shared_info
137     webgli: Added advanced mode. mostly just disables a few screens.
138    
139 agaffney 1205 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
140     src/GLIPortage.py:
141     get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
142     added emerge()
143 agaffney 1208 update sub-progress after each package is emerged
144     skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
145 agaffney 1211 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
146 agaffney 1216 remove link if it exists before moving content into place
147 agaffney 1205 src/GLIArchitectureTemplate.py:
148     install_packages() now calls emerge() in GLIPortage
149 agaffney 1208 change all calls to self._emerge() to self._portage.emerge()
150     comment out all emerge status checking...using exceptions now
151 agaffney 1214 call copy_pkg_to_chroot() directly for livecd-kernel
152 agaffney 1205
153 agaffney 1198 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
154     src/GLIArchitectureTemplate.py:
155     remove add_pkg_to_world() and copy_pkg_to_chroot()
156 agaffney 1201 copy installer.log to installer.log.failed on install failure
157 agaffney 1202 src/GLIUtility.py:
158     added get_keymaps()
159     spawn() takes any False argument for chroot instead of just None
160 agaffney 1198 src/GLIPortage.py:
161     copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
162 agaffney 1202 change copy_pkg_to_chroot() to work properly with use_root=False
163 agaffney 1204 figure PORTAGE_TMPDIR properly
164 agaffney 1198
165 agaffney 1197 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
166     src/net/server/html/*:
167     converted showclients, load/saveprofile
168    
169 agaffney 1194 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
170     src/GLIPortage.py:
171     exclude packages already in chroot vdb from binary deplist
172 agaffney 1195 chroot to use best_version for chroot's vdb
173 agaffney 1196 src/runtimedeps.py:
174     accept ROOT via commandline instead of env
175 agaffney 1194
176     25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
177 agaffney 1189 src/runtimedeps.py:
178 agaffney 1191 remove passing of ROOT
179 agaffney 1184 src/GLIPortage.py:
180 agaffney 1189 modify get_deps() to get deptree for each package and merge into final list
181 agaffney 1190 remove depgraph class
182     add debugging code to get_deps()
183 agaffney 1189 src/GLIArchitectureTemplate.py:
184     combine code for GRP/compile in install_packages() into one block
185 agaffney 1190 debugging code in install_packages()
186 agaffney 1184
187 agaffney 1194 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
188     src/runtimedeps.py:
189     initial commit
190     src/GLIPortage.py:
191     use separate script for GRP deps
192     remove calls to portage module
193    
194 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
195     src/GLIPortage.py:
196     initial commit
197 agaffney 1182 move some of portage function from GLIAT
198 agaffney 1183 flipped around a few function args
199 agaffney 1182 src/GLIArchitectureTemplate.py:
200     revamp install_packages() for new GLIPortage
201 agaffney 1181
202 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
203     src/GLIArchitectureTemplate.py:
204     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
205    
206 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
207     src/net/server/gliserv.py:
208     wrap generated code in a class to isolate it a bit better
209     302 redirects work
210 agaffney 1179 don't use cgi.escape() for <% %>
211 agaffney 1177 src/net/server/html/webgli/*:
212     load/save profile
213 agaffney 1178 src/GLIUtility.py:
214     change /sbin/lspci to just lspci
215 agaffney 1176
216 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
217     src/GLIClientController.py:
218     change ordering of statements in CC run() while loop to not go past the end
219     of the array
220 agaffney 1173 src/GLIArchitectureTemplate.py:
221     removed redundant bind mounts
222 agaffney 1172
223 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
224     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
225 codeman 1171 added a diagram by blackace from last night.
226     added the glossary in RTF format.
227 codeman 1170
228 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
229     x86AT: separated out emerge/configure from running of bootloader
230     added MBR drive support to lilo.
231     these changes will likely not work.
232     AT: added setup_and_run_bootloader step.
233    
234 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
235     src/net/server/gliserv.py:
236     call generated code in a function
237     src/net/server/html/webgli/*:
238     include top/bottom
239 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
240     src/GLIClientCongifuration.py:
241     install mode magic
242 agaffney 1163
243 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
244     src/GLIClientController.py:
245     use GLIException when there's an import problem
246 agaffney 1159 added debug code to show install_steps
247 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
248     add . to import path
249 agaffney 1160 proper path this time: ../../templates
250 agaffney 1162 src/GLIArchitectureTemplate.py:
251     add _portage_best_version() function
252 agaffney 1156
253 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
254     added initial glossary and gimli diagram to the docs directory.
255 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
256 codeman 1154
257 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
258     src/net/server/html/webgli/:
259     converted globaluse, localuse, networkmounts, portagetree, and stageselection
260 agaffney 1150 moved saveclientconfig stuff into clientconfig
261 agaffney 1151 moved saveconfigfiles into config files
262     converted etc_portage and makedotconf
263 agaffney 1152 converted bootloader and kernel
264 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
265 agaffney 1151 src/net/server/gliserv.py:
266     proper 404 handling for .pyhtml extension
267     HTML escape <% %> stuff
268 agaffney 1152 work around python's sucky regexes
269 agaffney 1153 src/GLIInstallProfile.py:
270     allow set_{rsync,ftp,http}_proxy() to accept empty values
271 agaffney 1149
272 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
273     src/net/server/gliserv.py:
274 agaffney 1148 initial commit of Legolas templating engine
275     302 redirects
276 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
277     minor changes for new code
278     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
279     initial commit of the conversion from the monolithic WebGLIHandler.py to the
280 agaffney 1148 one file per path Legolas goodness
281     partitioning[2-4] done
282 agaffney 1147
283 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
284     webgli: dhcp options in CC and post-install.
285     updated comparison chart.
286 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
287 codeman 1145
288 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
289     webgli_template.html: valign=top on left side.
290     webgli: fix bootloader boot_device. now working.
291 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
292 agaffney 1138
293 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
294     src/net/server/webgli_template.html:
295     increase padding for content cell to 7px and add colspan=2
296    
297 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
298     webgli: added graphic bar on top
299     webgli: added hover effects on the links on the left
300     webgli: re-rendered header_bg.png to stretch without artifacts
301    
302 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
303     webgli: make.conf disabling fixes for dynamic_stage3
304     fixed portage snapshot browse popup
305     all changes tested.
306     webgli: add debug mode to CC screen. the screen still needs lots of work.
307    
308 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
309     added debug mode question to gli-dialog
310     added CC proxies to CC networking for gli-dialog
311 codeman 1125 webgli: fixed skip CC networking if connection active
312     webgli: portage snapshot defaults to CD
313     webgli: bootloader mbr drive selection
314     webgli: USE flags unselectable if dynamic_stage3
315     webgli: manual extra packages and save button.
316    
317 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
318     src/GLIUtility.py:
319     change ping count to 2
320 agaffney 1121 docs/comparison.html
321     initial commit
322 agaffney 1119
323 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
324     src/templates/x86ArchitectureTemplate.py:
325     fix map() issue with grub code
326     replace kernel_names and initrd_names loops with one-liners
327    
328 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
329     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
330 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
331 codeman 1106 failure cleanup now an option for gli-dialog.
332 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
333     added comparison list and updated TODO!
334 codeman 1102
335 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
336     src/GLIArchitectureTemplate.py:
337     fix to stage1() debug code
338 agaffney 1098 fix to stage2() debug code
339 agaffney 1097
340 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
341     some more bootloader code fixes. forgot boot_device != mbr_device.
342 agaffney 1097
343     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
344     src/GLIStorageDevice.py:
345     fix to unallocated space merging when last one is after part 4
346 codeman 1096
347 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
348     src/GLIArchitectureTemplate.py:
349     small fix to debugging code in copy_pkg_to_chroot()
350    
351 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
352 codeman 1096 more bugfixes with bootloader code
353     gli-dialog side appears to work
354 codeman 1086
355 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
356 codeman 1080 initial adding of boot_device to backend.
357     initial boot_device support added to gli-dialog.
358 codeman 1096 some fixes of my poor coding
359 codeman 1077
360 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
361 codeman 1075 converted gli-dialog to use the install_package_list.
362     gtkfe has already been converted by AllanonJL
363 codeman 1076 new way working in gli-dialog now and added to webgli.
364 codeman 1077 added set/get_boot_device() to IP
365 codeman 1075
366 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
367     get_install_package_list added to InstallProfile. This can be used by the FEs
368    
369 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
370     src/templates/x86ArchitectureTemplate.py:
371     call ls with '-1 --color=no'
372    
373 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
374 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
375 codeman 1069
376 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
377     src/GLIArchitectureTemplate.py:
378     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
379     confused
380    
381 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
382     removed protocols from rc.conf screens
383     finished initial rc.conf and make.conf in webgli
384    
385 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
386     src/net/server/gliserv.py:
387     add -h option to usage()
388 agaffney 1063 show time and request URI in debug mode
389 agaffney 1064 show client IP in debug mode
390 agaffney 1065 just use IP instead of trying to do a reverse lookup
391 agaffney 1062
392 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
393     src/net/server/gliserv.py:
394     'classier' 401 message
395     proper commandline parsing
396     help via -h
397     user/pass can be specificed via commandline option
398    
399 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
400 agaffney 1057 src/net/server/gliserv.py:
401 agaffney 1059 basic HTTP auth
402    
403     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
404     src/net/server/gliserv.py:
405 agaffney 1057 dynamic module reloading (yipee!)
406 agaffney 1058 send 'Last-Modified' header for real files
407     respond to HEAD with just headers
408 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
409     icons for drives
410    
411 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
412     src/net/server/handlers/WebGLIHandler.py:
413     initial 'pretty' partition table display support
414 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
415 agaffney 1044 radio buttons and pretty display work together
416     META redirect instead of javascript
417     pretty display stretches across entire screen
418 agaffney 1046 'Recommended layout' and 'Clear drive' functions
419 agaffney 1047 properly catch exceptions from do_recommended()
420 agaffney 1049 src/GLIArchitectureTemplate.py:
421     replace preinst, copy, postinst, rm steps with qmerge
422 agaffney 1050 whoops...that shouldn't have been commented out
423 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
424 agaffney 1052 more generic of symlink crappiness
425 agaffney 1053 new copy_pkg_to_chroot() actually works now
426 agaffney 1042
427 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
428     src/GLIStorageDevice.py:
429     initial generic disk support
430 agaffney 1040 fixes for add_partition() code
431 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
432     added support for creating generic disks
433 agaffney 1040 add new partition working
434 agaffney 1041 save and delete partitions
435 agaffney 1037
436 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
437     webgli: Partitioning making progress.
438    
439 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
440     src/GLIArchitectureTemplate.py:
441     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
442     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
443     dir) and works around /etc/gconf symlink problem
444    
445 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
446     webgli: lots of updates. preliminary partitioning. extra packages works.
447    
448 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
449     src/net/server/gliserv.py:
450     httpd now supports HTTPS and falls back to HTTP if not available
451 agaffney 1030 make fallback actually work
452 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
453     SecureSocketServer is now threaded
454    
455 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
456     src/net/client/gliclient.py:
457     try to use HTTPS for XMLRPC first and fallback to HTTP
458 agaffney 1028 pretend mode
459 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
460     HTTPS XMLRPC goodness from samyron
461 agaffney 1028 pass name of certificate
462 agaffney 1026
463 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
464     wegli: daemons and services screens done.
465    
466 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
467     webgli: networking and users screens
468     added return_redirect to handler.py
469 codeman 1022 loading and saving install/client profiles works for webgli now
470     Review also done
471 agaffney 1033
472     *GLI-0.2 (27 Oct 2005)
473 codeman 1025
474 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
475     src/templates/x86ArchitectureTemplate.py:
476     properly check for bootloader emerge exist status with exitsuccess()
477 agaffney 1010 log output of grub install command
478 agaffney 1011 add --batch --no-floppy to grub command
479 agaffney 1013 grubinstallstring only gets logged if debug is on
480 agaffney 1012 src/GLIUtility.py:
481     update progress bar to 100% when process finishes
482 agaffney 1009
483 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
484     src/GLIClientController.py:
485     added debugging code for the interaction between the 2 threads via Event()
486 agaffney 1003 src/GLIUtility.py:
487     doubled the buffer size in spawn()
488 agaffney 1004 bump buffer size up to 16384
489     only report progress in 5% increments
490 agaffney 1005 src/GLIArchitectureTemplate.py:
491     kernelpkgs.txt support code
492 agaffney 1006 above disabled because it sucks
493 agaffney 1007 added add_pkg_to_world()
494 agaffney 1002
495 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
496     src/GLIArchitectureTemplate.py:
497     use tar | tar to copy files in copy_pkg_to_chroot()
498     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
499    
500 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
501     DEBUGGING ADDED TO AT. verbose field added to CConfig.
502    
503 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
504     src/net/server/gliserv.py:
505     / maps to index.html
506     look for actual files in html/
507     src/net/html:
508     new template
509 agaffney 998 src/GLIUtility.py:
510     added parse_vdb_contents()
511     src/GLIArchitectureTemplate.py:
512     added copy_pkg_to_chroot()
513     added debug code to dynamic-stage3
514 agaffney 999 switch dynamic-stage3 to new method
515     lots of bug fixes from adding debug code
516 agaffney 993
517 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
518     webgli initial bootloader support + changed make.conf.
519 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
520 codeman 983
521 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
522 agaffney 982 src/GLIUtility.py:
523 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
524 agaffney 981 add unpack progress to portage snapshot
525 agaffney 982 use read() instead of readlines() in spawn()
526     only update progress bar for whole percents
527 agaffney 980
528 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
529     src/templates/x86ArchitectureTemplate.py:
530     change call to 'grub' to use GLIUtility.exitsuccess()
531 agaffney 977 add definition of 'build_mode' in _configure_lilo()
532 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
533     fix so subshell is called in root shell
534    
535 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
536     src/net/server/handlers/WebGLIHandler.py:
537     stage screen launches URI browser in sized window with various properties set
538    
539 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
540     src/misc/updategtkfe:
541     updated to actually work
542 agaffney 972 remove previous snapshot and extracted dir before downloading
543 agaffney 973 src/misc/updateglid:
544     updated to actually work
545 agaffney 974 src/templates/x86ArchitectureTemplate.py:
546     fixed bug where grub code was looking for 'root+root+file_name2'
547 agaffney 971
548 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
549     src/net/server/handlers/WebGLIHandler.py:
550     URI browser
551 agaffney 970 added mirror selection
552 agaffney 969 src/GLIUtility.py:
553     ls via ssh strips off ending *
554 agaffney 968
555 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
556     more updates to webgli. stage selection.
557    
558 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
559     updated webgli with preliminary Network Mounts support.
560    
561 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
562     GenDialog: string formatting and yes/no label fixes.
563     added WebGLI template for gliserv.py
564     added WebGLIHandler as well as a definition for it in gliserv.py
565     updates to the webgli files even though they won't be there for long.
566 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
567     goes public.
568 codeman 952
569 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
570     src/net/server/gliserv.py:
571     override dict to not be so anal
572 agaffney 949 main server now loads separate module to handle requests
573 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
574 agaffney 949 split out profile URLs into separate handler function
575 agaffney 950 move handlers into subdirectory
576 agaffney 956 add Welcome and Clients handlers
577 agaffney 949
578 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
579     src/GLIUtility.py:
580     raise exception if password prompt received twice
581    
582 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
583 agaffney 944 src/GLIUtility.py:
584 agaffney 943 removed rot13ify()
585    
586     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
587 agaffney 935 src/net/server/gliserv.py:
588     allow for param to be passed multiple times in GET
589 agaffney 940 no XMLRPC functions return None
590 agaffney 941 modify POST request parsing to only create a list if needed
591 agaffney 942 fix GET request parsing so the list creation for multiple values works
592 agaffney 940 src/net/client/gliclient.py:
593     various typo and type mismatch fixes
594     exit after exception
595 agaffney 935
596 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
597     src/net/client/gliclient.py:
598     initial commit
599 agaffney 934 pass MAC to XMLRPC functions
600     src/net/server/GLIServerProfile.py:
601     rename GLIClientsProfiles to GLIServerProfile
602 agaffney 933
603 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
604     src/net/server/gliserv.py:
605     now handles POST requests
606     move majority of request handling code to common_handler() to reduce code
607     duplication
608 agaffney 931 profile loading
609     client reg via XMLRPC goes into SharedInfo()
610     /showclients redesign
611     template fixes
612 agaffney 932 allow handler functions to add/change headers
613     save profile
614 agaffney 930
615 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
616     src/net/server/GLIClientsProfiles.py:
617     initial commit
618     src/net/server/template.html:
619     initial commit
620     src/net/server/gliserv.py:
621     add template mojo
622    
623 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
624     src/net/server/gliserv.py:
625     XMLRPC mojo
626    
627 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
628     src/GLIArchitectureTemplate.py:
629     add code in _edit_config() to comment line where variable is defined
630     previously
631 agaffney 920 insert new line under previous definition of variable if it exists
632 agaffney 921 small _edit_config() cleanup
633 agaffney 923 src/GLIStorageDevice.py:
634     add clear_partitions() function
635 agaffney 924 new sizes for recommended partition layout
636 agaffney 925 automatically calculate swap size for recommended layout
637 agaffney 919
638 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
639     src/templates/x86ArchitectureTemplate.py:
640     fat16 mojo
641    
642 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
643     src/GLIStorageDevice.py:
644     prevent do_recommended() from being run twice
645 agaffney 916 rewrite do_recommended() to be more robust
646 agaffney 917 src/GLIArchitectureTemplate.py:
647     rework _edit_config() to not write duplicate entries
648 agaffney 914
649 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
650     src/GLIStorageDevice.py:
651     added do_recommended() function to automatically created 256M/1G/* layout
652    
653 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
654     src/gli-dialog.py: added set_distcc to the list
655     GenDialog: added set_distcc. untested.
656     IP: added install_distcc flag.
657     AT: added install_distcc function based on the flag. runs after build_kernel
658 codeman 911 changed AT spawn command for distcc for nodeps.
659 codeman 907
660 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
661     src/GLIUtility.py:
662     add rot13ify() function
663    
664 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
665     src/GenDialog.py
666 codeman 905 added a sentence of text. unchecking support added.
667 codeman 904
668 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
669     src/GLIUtility.py
670     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
671     src/GenDialog.py
672 codeman 902 still working on extra_packages. transformed the list to new format.
673     added GRP indication to list. untested.
674 codeman 901 TODO lists updated.
675     src/fe/dialog/gli-dialog.py
676     spelling mistook.
677    
678 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
679     src/GLIUtility.py:
680     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
681    
682 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
683     src/GLIUtility.py:
684     add get_directory_listing_from_uri()
685     add http support to above
686 agaffney 892 add ftp support to above
687 agaffney 893 add scp support to above
688 agaffney 891 src/GLIArchitectureTemplate.py:
689     "0" instead of 0 for key of single-element dict passed to _edit_config()
690 agaffney 889
691 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
692     value_only -> only_value
693    
694 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
695     gutted out all of etc_portage structure since it is now all handled by
696     etc_files
697    
698 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
699     src/GLIArchitectureTemplate.py:
700     install_packages() sends progress update notifications
701 agaffney 876 src/templates/x86ArchitectureTemplate.py:
702     increase sleep to 5s between format tries
703 agaffney 882 src/GLIClientController.py:
704     pass 'self' to AT instead of 'self._pretend'
705 agaffney 874
706 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
707     logger -> logger.log in x86AT
708    
709 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
710     added set_etc_portage to IP. debugging gli-d's support for it.
711    
712 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
713     src/templates/x86ArchitectureTemplate.py:
714     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
715    
716 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
717     src/GLIArchitectureTemplate.py:
718     add _portage_best_version() function and rework install_packages() to allow
719     for future X of Y tracking
720 agaffney 860 Use best_visible instead of best_version
721 agaffney 862 tracked down and fixed missing = causing empty install extra packages
722 agaffney 864 use = when emerging also
723 agaffney 865 quickpkg hokey pokey
724 agaffney 867 run _get_packages_to_emerge() again with -pk
725 agaffney 857
726 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
727     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
728     the end of install_packages.
729 codeman 850 added updateglid to /src/misc
730 codeman 851 updated all core files with new GPL notice and copyright statement.
731 codeman 848
732 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
733     src/GLIUtility.py:
734     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
735     a snapshot in /mnt/cdrom/snapshots/
736 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
737 agaffney 846 change calls to extra package special case functions to 'self.blah'
738 agaffney 839
739 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
740     src/ArchTemplate: changed "voodoo".
741 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
742     normal emerge sync fails.
743 codeman 836 removed get_sources_from_cd because it is obsolete.
744     add special cases to install_packages. remove fatal exception on package
745     install failure b/c the box will still be bootable.
746 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
747     handled in the FEs.
748 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
749     awaiting testing.
750 codeman 830
751 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
752     src/GLIStorageDevice.py:
753     global try/except block around fs resizable detection code
754 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
755     install-failed cleanup function
756 agaffney 826
757 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
758     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
759    
760 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
761 codeman 814 GLIGenDialog:
762     add drive choices for loaded configs.
763     force snapshot for dynamic_stage3
764     init the snapshoturi input to the cd snapshot if not already selected.
765     if dynamic_stage3, skip the make.conf step.
766     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
767     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
768 codeman 812
769 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
770     src/GLIArchitectureTemplate.py:
771     manually call MAKEDEV in stage3-dynamic code
772 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
773 agaffney 815 src/GLIUtility.py:
774     add beginning of validate_uri() function
775 agaffney 817 add file:/// support to validate_uri()
776 agaffney 822 single quotes when setting livecd password
777 agaffney 811
778 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
779     src/GLIGenDialog.py:
780     change getmountpoint() to get_mountpoint()
781 agaffney 808 src/misc/updategtkfe:
782     committed script to automatically download latest snapshot and run gtkfe
783 agaffney 809 src/templates/x86ArchitectureTemplate.py:
784     fix _configure_lilo_add_windows() for IP -> GLISD stuff
785 agaffney 810 src/GLIArchitectureTemplate.py:
786     give tmp_minor an initial value in mount_local_partitions so that the value
787     remain from the previous drive
788 agaffney 807
789 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
790     src/templates/x86ArchitectureTemplate.py:
791     Fix _configure_lilo() for IP using GLISD stuff
792 agaffney 806 src/GLIArchitectureTemplate.py:
793     install_cron_daemon() treats "none" specially
794 agaffney 805
795 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
796     old patch from Steven Mertens to resolve bug #96642
797 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
798     strings renamed for global use if necessary.
799 codeman 803 fix all three parts of bug 102291
800 codeman 804 disable set_etc_portage until fully-written.
801 codeman 801
802 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
803     src/GLIClientController.py:
804     lower-case http/ftp proxy envvars
805    
806 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
807     src/GLIClientController.py:
808     log end of pre_install steps to aid in debugging
809 agaffney 798 src/templates/x86ArchitectureTemplate.py:
810     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
811 agaffney 797
812 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
813     src/GLIArchitectureTemplate.py
814     check to make sure that the device node we're wait for to exist isn't of
815     type 'free'
816    
817 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
818     src/GLIGenDialog.py:
819     convert install_packages to list in set_extra_packages()
820 agaffney 793 check return code of checklist() call in "Manual" section
821 agaffney 794 *actually* fix the first problem
822 agaffney 792
823 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
824     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
825     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
826    
827 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
828     src/GLIArchitectureTemplate.py:
829     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
830    
831 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
832     Add CDATA support to SimpleXMLParser and add utility functions for it.
833    
834 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
835     src/GLIArchitectureTemplate.py:
836     Fix case where vixie-cron is specified as a full package atom, as we still
837     don't want to run 'crontab /etc/crontab' for it.
838    
839 agaffney 788 *GLI-0.1 (3 Aug 2005)
840    
841 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
842     add scp to list of is_uri() so GenDialog doesn't complain.
843 codeman 769 fixed livecd-kernel bug in bootloader code.
844 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
845     change bootloader to allow for both initrd and initramfs.
846 codeman 777 fix IP for dynamic_stage3.
847 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
848 codeman 777
849 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
850     Added full scp:// URI support to get_uri() in GLIUtility
851 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
852     Remove print statement from scp:// code.
853 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
854 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
855 agaffney 770 Check to make sure pkg can be split on / and some debugging code
856 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
857 codeman 777 SimpleXMLParser handles True/False/None correctly now
858 agaffney 778 Comment out above fix
859 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
860 codeman 764
861 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
862     Removed a FIXME in the GLIClientConfiguration that is no
863     longer needed.
864    
865 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
866     Default to x86 in ClientConfig
867 agaffney 761 Typo in build-a-stage3 code.
868     Remove MAKEDEV call in build-a-stage3 postscript.
869 agaffney 760
870 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
871     Rewrote init of IP for gli-d. Other GenDialog updates.
872     allow network_type to be None in CConfig.
873    
874 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
875     Add _dynamic_stage3 option to IP.
876     Add check for that option to dynamic stage3 code in ArchTemplate.
877 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
878     Fix serialization of dns-servers in ClientConfig.
879 agaffney 755
880 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
881     changed default values of cron/logger in IP.
882     moved GenDialog IP init out to the individual files. gli-dialog's version
883     will change quite a bit.
884    
885 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
886     added ppcArchTemplate. blank now. working on yaboot.
887 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
888     skeleton implementation of _configure_yaboot.
889     small fixes to other templates.
890 codeman 750
891 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
892     GenDialog updates. changed comment in IP.
893    
894 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
895 robbat2 743 src/GLIInstallProfile.py:
896     Fix codeman's screwup of changing the service seperator to ',' in the parser
897     without changing it in the serialization code! Also document this in a
898     comment so you find it easier. Everybody needs to make sure they update
899     their install profiles!
900    
901     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
902 robbat2 742 src/GLIArchitectureTemplate.py:
903     Fix casting of list to string and concat of None with string, as well as
904     commented prototype of checking that mounting actually worked (found a case
905     where mount can return success, but the mount won't be done).
906    
907     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
908 robbat2 740 src/templates/x86ArchitectureTemplate.py:
909 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
910     checking for the device, and sleeping 1 second each time.
911    
912     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
913     src/templates/x86ArchitectureTemplate.py:
914 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
915     bootloader works again. Also rename _install_{grub,lilo} to
916     _configure_{grub,lilo} since they don't install the loaders anymore
917     themselves.
918    
919 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
920     fix global USE flags to not include the arch types at the end.
921     updates to GenDialog and gli-d.
922    
923 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
924     fixing bootloader code for no initrd and initrd->initramfs naming change.
925    
926 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
927     Proper comments and parameters to GLIException in install_mta()
928 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
929 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
930     list_tarball_from_mirror() to eliminate blank last item.
931 agaffney 733
932 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
933     Added stage3 generation code.
934    
935 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
936     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
937     Mild changes to GenDialog.
938    
939 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
940     Remove separate install step configure_rc_conf() since it's handled by
941     update_config_files()
942     Make a copy of newvalues in _edit_config() so quotes aren't added when the
943     function is called twice on the same file.
944    
945 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
946     Missing \ in sed in _get_packages_to_emerge()
947 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
948 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
949     _get_packages_to_emerge()
950 agaffney 726
951 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
952     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
953     in the dialog.py gauge code.
954    
955 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
956     Add code to update_config_files() to go through etc_files and update stuff.
957 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
958 agaffney 724 Only use float() in partition xml parsing code if type == "free"
959 agaffney 720
960 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
961     finished almost all internationalization of GenDialog.
962 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
963 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
964 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
965 codeman 718
966 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
967     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
968    
969 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
970     fix extra entry in list_mirrors()
971     beginning internationalization runthrough.
972    
973 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
974     added dialog.py to /src temporarily until it gets accepted upstream.
975 codeman 714 fix for unused value in form in dialog.py and changed heights.
976     fix GenDialog forms.
977 codeman 713
978 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
979     Changed hostname/domainname for new baselayout.
980     Changed _add_to_runlevel errors to logs.
981     Updated TODO list to show status of GenDialog
982     More updates to GenDialog including two checklists that probably won't work.
983 codeman 711 update IP to use comma-separated list instead of space separated for services.
984 codeman 710
985 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
986     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
987     GenDialog as it gets closer to completion.
988    
989 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
990 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
991     instead of int() in add_partition_device_partition() for minor (closes 96804)
992 agaffney 704
993     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
994     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
995     instead of 'interfaces[interface][1]' since DHCP uses that field for its
996     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
997    
998 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
999 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1000 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1001 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1002 agaffney 704 Fix undefined variable 'output' issue in spawn().
1003 agaffney 697
1004 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1005     More updates to GenDialog and gli-d.
1006    
1007 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1008     Modify list_mirrors() to return a list of mirror URL/name pairs.
1009    
1010 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1011     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1012     get subarch.
1013    
1014 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1015     Backend partitioning will create disklabel is none exists. Installprofile
1016 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
1017     mount_local_partitions() to remember device along with minor in the
1018 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1019     add else block to log unsupported netmount types to mount_network_shares()
1020 agaffney 691
1021 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1022     src/GLIArchitectureTemplate.py:
1023 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
1024     src/fe/cli/clife.py:
1025     Logging system.
1026     src/GLIUtility.py, src/GLIStorageDevice.py:
1027     Add comments about re-writes needed for boxes without sysfs.
1028    
1029     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1030     src/GLIArchitectureTemplate.py:
1031 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1032     'make dep' call for custom compile. build_mode support for prepare-only and
1033     none types completed. custom compile function chains shell functions in
1034     spawned script, to allow for catching all errors.
1035    
1036 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1037     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1038     and GenDialog. other gendialog updates as well. kernel updates untested.
1039    
1040 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1041     src/GLIInstallProfile.py:
1042     Change structure of etc-portage stuff. The serialization was broken before my
1043     last commit, and I am the only person that's ever used it. The new schema is
1044     as follows:
1045     <etc-portage>
1046     <file name="package.mask"/>
1047     <file name="package.unmask">
1048     <entry atom="sys-kernel/openmosix-sources"/>
1049     </file>
1050     <file name="package.use">
1051     <entry atom="sys-libs/db">
1052     -java
1053     </entry>
1054     <entry atom="dev-libs/cyrus-sasl">
1055     -ldap
1056     </entry>
1057     </file>
1058     </etc-portage>
1059    
1060    
1061 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1062     src/GLIInstallProfile.py:
1063     Add new entry for gli-profile/kernel-build-method item. Add missing
1064     serialize_etc_portage (temporary). Make serialize_make_conf always print the
1065     keys in the same order.
1066    
1067 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1068     src/GLIArchitectureTemplate.py:
1069 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1070     was repeatedly appended to make.conf.
1071    
1072     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1073     src/GLIArchitectureTemplate.py:
1074 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
1075     successfully mounted swap device for using swapoff. Add proper error checking
1076     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1077     'file'. Clean up some redundant code (thanks to pychecker).'
1078    
1079 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1080 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
1081 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1082     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1083 agaffney 668
1084 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1085     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1086     in add_network_interface.
1087    
1088 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1089     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1090     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1091 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1092     prepare_chroot.
1093 robbat2 664
1094 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1095     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1096     +src/fe/installer-gtk:
1097     Add new automated CLI frontend. Add scripts that are the intended means to
1098     use each frontend.
1099    
1100 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1101 robbat2 663 src/GLIClientController.py:
1102     Add null type to network config, for cases where the interface is already up
1103     and should not be touched (netboot for example).
1104    
1105     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1106 robbat2 652 src/GLIArchitectureTemplate.py:
1107 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1108     string!. Try to use binary packages if available by default.
1109    
1110     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1111     src/GLIArchitectureTemplate.py:
1112 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
1113     actually exists before we try to add it. set_services phase must take place
1114     after the package installation, otherwise the init scripts might not exist.
1115     Find the correct init script for the cron and logging daemons, and add that
1116     instead of the package atom.
1117    
1118     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1119     src/GLIArchitectureTemplate.py:
1120 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1121     usage of 'file' to 'contents' for the variable name, as it shadows
1122     __builtin__.file.
1123    
1124     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1125     src/GLIArchitectureTemplate.py:
1126 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
1127     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1128     for 'none' kernel config for build_kernel phase. Put kernel_script in
1129     /var/tmp instead of /root for build_kernel phase.
1130    
1131 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1132     Rename mta variables to match syslog/cron variables.
1133    
1134 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1135 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1136     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1137     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1138     src/templates/.cvsignore, src/tests/.cvsignore:
1139     Refactor partition formatting again to include error checking. Allow 'none'
1140     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1141    
1142     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1143 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1144     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1145     only have a single spawn call.
1146    
1147 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1148     refixed samyron's fix of set_architecture_template.
1149    
1150 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1151     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1152     be executable.
1153    
1154 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1155     Fixed one of the FIXME's in the ClientConfiguration. There is now some
1156     error checking when you call set_architecture_template.
1157    
1158 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1159     moved the mkfsopts input to the partition options menu instead of the during
1160     the creation process. updated GenDialog to say it supports reiserfs v3.
1161    
1162 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1163     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1164     Complete support for 'mkfsopts' parameter in main system and dialogfe.
1165     Add support for other partition types to dialogfe.
1166     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1167     avoid integer overflows and wraparounds.
1168    
1169 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1170     Removed start/end from XML output and added mkfsopts to partitioning info.
1171 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1172 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1173 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
1174     partitioning. Fix free space overwriting bug. Remove a few unused functions
1175 agaffney 640 from rewrite. Fix call to get_partition_at()
1176 agaffney 631
1177 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1178     Updates to GenDialog and dialogfe.
1179    
1180 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1181 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1182 agaffney 627
1183 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1184     more GenDialog updates to partitioning.
1185    
1186 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1187     Indenting issue in GLISD/get_ordered_partition_list.
1188     updates to GenDialog partitioning and added default UTC for timezone in IP.
1189    
1190 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1191     Added GLISD.get_model()
1192    
1193 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1194     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1195     More updates to GenDialog :)
1196    
1197 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1198     Added get_interface_realname() function.
1199    
1200 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1201     Added auto-save of CConfig and copying to new /root after install.
1202     yet even more GenDialog updates.
1203    
1204 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1205     removed print statement from GLISD. more updates to GenDialog.
1206    
1207 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1208 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1209 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1210 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1211     places in GLIClientConfiguration.
1212 agaffney 608
1213 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1214     Fix mount_local_partitions(), configure_fstab(), and
1215 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1216 agaffney 601 A few more fixes for templates/x86Archtemplate
1217 agaffney 599
1218 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1219     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1220     a work in progress.
1221    
1222 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1223     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1224     directly. GLISD can now handle data imported from XML.
1225    
1226 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1227     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1228     handle blank (no disklabel) disks.
1229    
1230 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1231     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1232     up, documented, and separated out serialization and grouped all sections.
1233    
1234 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1235     Reorganization of ClientConfiguration and gutting of unused functions.
1236     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1237    
1238 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1239     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1240    
1241 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1242 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1243 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1244     copies it into /mnt/gentoo/root
1245 agaffney 588
1246 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1247     Moved URI parsing into new function parse_uri()
1248    
1249 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1250     Added XMLParser module.
1251    
1252 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1253     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1254 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1255 agaffney 580
1256 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1257     Updated finishing_cleanup for new unmounting method from agaffney.
1258    
1259 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1260 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1261 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1262     unicode support to is_realstring().
1263 agaffney 575
1264 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1265 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1266 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1267 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1268     instead of --nocolor.
1269 agaffney 571
1270 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1271     Added GLIGenDialog.py to make a generic class for the dialog functions that
1272 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1273     date changes. 2004->2005.
1274 codeman 566
1275 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1276     Removed 'quiet=True' from spawn() calls
1277    
1278 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1279     Updated GLIUtility with patches from chotchki. Also added documentation
1280    
1281 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1282     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1283     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1284     from bug #89683, mostly touchups.
1285    
1286 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1287     GLIStorageDevice cleanup patch from bug #91761
1288    
1289 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1290     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1291 agaffney 553 _edit_config(). Error logging casts 'error' to str
1292 agaffney 551
1293 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1294 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1295     code to CC to handle exceptions *not* thrown by the installer itself.
1296 agaffney 548
1297 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1298     get_max_mb_for_resize() returns -1 if not self.resizeable
1299    
1300     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1301 agaffney 539 More dirty rsync hacks :-/
1302    
1303 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1304     Patches from chotchki (bug #90325) to improve CC networking. untested.
1305    
1306 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1307 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1308 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1309 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1310 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1311 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1312     _get_packages_to_emerge()
1313 agaffney 528
1314 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1315     Added group-adding code to set_users in ArchTemplate
1316    
1317 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1318     Added post-install script code
1319    
1320 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1321     Fixed encapsulation issues in GLIClientController (bug #90141)
1322    
1323 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1324     Update resizing code in GLIStorageDevice
1325    
1326 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1327     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1328    
1329 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1330     Reverted change to ArchTemplate and added support for commented line in old
1331     code.
1332    
1333 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1334     Changed _edit_config() to modify value in-place instead of commenting out and
1335     adding the new value to the end of the file.
1336    
1337 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1338     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1339     Also updated TODO list.
1340    
1341 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1342     Use blackace's one-liner to add comments for all function for use with
1343     pythondoc.
1344    
1345 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1346     Moved 'end >= device_sectors' check out of loop to check for next partition's
1347 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1348 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1349     point of logical is now adjusted along with start.
1350 agaffney 503
1351 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1352 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1353 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1354     key in partition information due to new partition code leaving them as float.
1355 agaffney 497
1356 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1357 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1358 agaffney 494
1359 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1360     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1361    
1362     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1363 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1364    
1365 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1366 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1367     sed to properly strip out junk.
1368 agaffney 481
1369 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1370 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1371 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1372 codeman 475
1373 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1374     Fixed indent problem in GLICController
1375    
1376 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1377     Check for disklabel type "loop" and use the device name without a minor.
1378    
1379 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1380     Remove /tmp/compile_output.log and /var/log/install.log when install is
1381 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1382 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1383 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1384 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1385 agaffney 453
1386 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1387 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1388     when unpacking tarball.
1389 agaffney 451
1390 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1391 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1392     filesystem_tools code.
1393 codeman 443
1394 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1395     Changed the print statements to logging in the partitioning BE code.
1396     the logger may need to be imported to the x86archtemplate. unknown yet.
1397 codeman 432 Added the finishing_cleanup function.
1398 codeman 433 added a fix to the logger from BenUrban
1399 codeman 427
1400 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1401     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1402     URIs. The blank uri check has been commented out.
1403 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1404 codeman 422
1405 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1406     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1407    
1408 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1409     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1410 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1411 agaffney 415
1412 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1413     small changes to setup_network_post. moved adding to runlevel of net.x to
1414     after the device gets symlinked. added domainname runlevel command.
1415    
1416 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1417 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1418 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1419     spawn() call in livecd-kernel code to pass environment variables.
1420 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1421     the install profile if available.
1422 agaffney 402
1423     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1424 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1425     to handle installing the livecd kernel into the new system.
1426    
1427 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1428     should emerge hotplug and coldplug before adding them to runlevel.
1429    
1430 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1431 codeman 395 took chroot out of grub_install command.
1432    
1433     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1434     Changed chroot wrapper code in spawn() to write the wrapper the python way
1435     instead of the bash way to avoid quote conflicts. Added
1436 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1437 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1438     as it breaks the piping.
1439 codeman 390
1440 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1441     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1442    
1443 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1444     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1445 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1446 agaffney 389 GLIInstallProfile.
1447 agaffney 385
1448 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1449 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1450     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1451     into /mnt/gentoo in prepare_chroot()
1452 agaffney 379
1453 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1454     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1455 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1456     to start/end sectors
1457 agaffney 375
1458     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1459 agaffney 374 Add 2>&1 to cmd in spawn()
1460    
1461 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1462     Modified GLIUtility.exitsuccess() to work with return value from
1463 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1464     creates wrapper script for commands run inside chroot so multiple commands
1465 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1466     for the generated script from spawn()
1467 agaffney 369
1468 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1469     Removed default values for stage tarball URI and portage tree URI from
1470     InstallProfile. These should be set by the FEs. also added services step to
1471     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1472     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1473    
1474 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1475     Small fix for setting the default gateway. Also added feature to dialogfe.
1476    
1477 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1478     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1479    
1480 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1481 codeman 346 Fixed a bunch of true -> True typos. lots of em
1482 codeman 347 only write new resolv.conf if there are dns servers listed.
1483 codeman 345
1484 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1485     Commented out 'display_on_tty8=True' in start_portmap()
1486    
1487 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1488     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1489    
1490 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1491 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1492     lang parameter to __init__()
1493 codeman 331
1494     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1495     updates to TODO list.
1496 esammer 4
1497 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1498 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1499     'emerge -p blah'
1500 agaffney 322
1501 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1502 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1503     added quickpkg to TODO list
1504 codeman 319
1505 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1506     Changed the raising of 'warning' exceptions to a simple log of the error
1507     so that the installer can continue.
1508    
1509 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1510     Some big changes. First, changed most output to display_on_tty8.
1511     Second, added log lines to all templates. Some smaller fixes such as typos.
1512     Also did some cleanups of old commented lines.
1513    
1514 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1515 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1516 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1517 agaffney 310
1518 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1519     more updates to TODO list. hopefully we'll soon start removing items instead
1520     of adding them.
1521    
1522 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1523     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1524    
1525 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1526 codeman 295 updated TODO list. (again)
1527 codeman 293
1528 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1529     changed output of portmap start to display_on_tty8.
1530     fixed bootloader for udev and multiple kernels
1531 codeman 288 fixed custom kernel config (again)
1532 codeman 286
1533 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1534     changed default value of CC._enable_ssh to True because this is smart.
1535 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1536 codeman 281
1537 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1538     partition() now waits until after it checks for partition flags before delete
1539     the partitions :P
1540    
1541 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1542 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1543 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1544     blank.
1545 agaffney 271
1546 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1547     Various fixes related to the add_users function. Still not yet finished.
1548 codeman 269 Added things to the TODO list. Lets start using that!
1549 codeman 268
1550 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1551     Added code to x86Template to format newly created partitions. Also added
1552 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1553 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1554     mounting code.
1555 agaffney 264
1556 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1557     Took out unnecessary setting of random livecd root password. the cd already
1558     sets it randomly.
1559    
1560 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1561     Took out an unneeded step from CC's run()
1562    
1563 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1564     Attempt at detecting and adding windows partitions to lilo.
1565    
1566 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1567 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1568     partition. fixed misc exit_status => exitstatus typo.
1569 codeman 235
1570 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1571 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1572     resizing ntfs and ext2/3.
1573 agaffney 230
1574 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1575     Fixed partition() in x86Template so that it scans through logicals and deletes
1576 agaffney 229 before deleting containing extended partition. Also clears partition table to
1577     be safe before third pass.
1578 agaffney 228
1579 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1580     Added mount_network_shares. not able to test it from this computer.
1581     will test when i get back to school.
1582     also added start_portmap to the client_controller as an always-do.
1583     agaffney says this is needed for NFS mounts to work.
1584    
1585 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1586     Partial rewrite of partitioning code in x86Template. No longer shells out to
1587     parted to perform actions, now uses all pyparted calls. Code "works" in a
1588     test, but still needs lots of TLC. Also modified tests/install.py to work
1589     with x86Template and GLIClientConfiguration.
1590    
1591 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1592     Initial move of partitioning code from ArchTemplate to x86Template.
1593 agaffney 220
1594 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1595 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1596 codeman 222
1597     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1598 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1599     Test Install ran very well (skipping partitioning).
1600    
1601 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1602 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1603 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1604     some may still have eluded me.
1605 codeman 215
1606     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1607 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1608     Just finished mount_local_partitions in GLIArchitectureTemplate
1609    
1610 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1611     Added get_num_sectors() to GLIStorageDevice.
1612    
1613     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1614 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1615 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1616     from GLIInstallProfile.
1617 agaffney 205
1618 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1619     GLIStorageDevice returns "unknown" instead of "" for get_type()
1620    
1621 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1622 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1623     actually work. Commented out resizability checking code for speed.
1624 agaffney 183
1625 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1626     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1627     GLIStorageDevice at the suggestion of plors
1628    
1629 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1630     Added a function to GLIUtility to pull a value from a make.conf-style config
1631 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1632 agaffney 162
1633 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1634 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1635     network mounts from partition data structure in GLIInstallProfile
1636 agaffney 161
1637 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1638     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1639     can be resized.
1640    
1641 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1642     Added some of the final functions to GLIInstallTemplate.
1643     Yes this project is still active despite rare use of the Changelog!
1644    
1645 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1646     Added the GLIPartitionTools.py file. This is a temporary insertion of
1647     partitioning tools that will eventually go into their own package.
1648    
1649 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1650     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1651     for the program). Added __init__(install_profile, client_configuration) to
1652     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1653     to avoid constantly passing stuff every time we call a method.
1654    
1655 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1656    
1657     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1658     files without messing up all the other stuff in them. This will be used for making
1659     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1660    
1661 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1662    
1663     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1664     have a few basic things. I added two private methods. One is _depends(). This
1665     will be used for dependency checking (ie. unpacking a tarball requires that
1666     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1667     same syntax as os.system(), however, instead of being run in the liveCD
1668     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1669     isolated the code. Hope to work more this week to get this class formed...
1670    
1671 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1672    
1673     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1674     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1675     to allow for easier modification (mutable, rather than immutable objects). Updated
1676     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1677     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1678     Added initial unit test code.
1679    
1680 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1681    
1682     Added initial changelog. Setting up the basic structure of the CVS repository
1683     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1684     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20