/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1339 - (hide annotations) (download)
Sun Mar 5 04:16:04 2006 UTC (9 years, 5 months ago) by agaffney
File size: 70752 byte(s)
  src/GLIPortage.py:
  create /tmp, /var/tmp, and /var/lib/portage with proper permissions

1 esammer 4 # ChangeLog for Gentoo Linux Installer
2 robbat2 790 # Copyright 2005-2005 Gentoo Technologies, Inc.
3 esammer 4
4 agaffney 1339 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.610 2006/03/05 04:16:04 agaffney Exp $
5 codeman 773
6 agaffney 1339 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
7     src/GLIPortage.py:
8     create /tmp, /var/tmp, and /var/lib/portage with proper permissions
9    
10 agaffney 1331 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
11     src/GLIClientController.py:
12     slightly better error handling for pre-install failures
13    
14 agaffney 1329 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
15     src/templates/x86ArchitectureTemplate.py:
16     proper return code checking for ext2/3 resizing
17    
18 agaffney 1317 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
19     src/GLIClientController.py:
20     accept 'none' as well as 'null' for network type
21 agaffney 1320 src/GLIArchitectureTemplate.py:
22     ignore extended partitions in mount_local_partitions()
23 agaffney 1321 src/templates/x86ArchitectureTemplate.py:
24     use get_ordered_partition_list() instead of keys().sort() for new_part_list
25     check to make sure start sector for primary isn't less than end sector for
26     previous extended
27 agaffney 1322 src/GLIClientController.py:
28     write dns servers to /etc/resolv.conf
29 agaffney 1317
30 agaffney 1314 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
31     src/GLIPortage.py:
32     copy_pkg_to_chroot() uses compile_output.log for command output
33    
34 agaffney 1313 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
35     only keep a 1000 line 'scrollback' buffer for the compile output and log file
36 agaffney 791
37 agaffney 1306 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
38     src/GLIPortage.py:
39     add code make GLIPortage.py capable of being run stand-along for dynamic
40     stage3 generation and copying packages in a GRP-ish way
41 agaffney 1311 grp code fixups
42 agaffney 1306
43 agaffney 1305 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
44     src/GLIPortage.py:
45     ignore blank packages passed to get_deps() and emerge()
46    
47 agaffney 1304 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
48     src/GLIUtility.py:
49     add get_chosts() function
50    
51 agaffney 1306 *GLI-0.3 (12 Feb 2006)
52    
53 agaffney 1302 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
54     src/templates/x86ArchitectureTemplate.py:
55     pull old start/end sector values from somewhere that actually has them
56     add logic for extended partition to code that makes sure new end sector
57     doesn't overlap start sector of next partitions
58 agaffney 1303 don't freak out if partition can't be deleted
59 agaffney 1302
60 agaffney 1297 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
61     src/GLIPortage.py:
62     run env-update at the end of copy_pkg_to_chroot()
63    
64 agaffney 1295 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
65     src/templates/x86ArchitectureTemplate.py:
66     I'm a complete fscking dumbass. I recorded the end sector for partitions that
67     weren't being touched, but I never used it when recreating them...the end was
68     calculated from the size in MB instead :/
69    
70 agaffney 1288 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
71     src/GLIArchitectureTemplate.py:
72     pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
73 agaffney 1294 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
74 agaffney 1291 src/GLIPortage.py:
75     use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
76     src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
77     'resized' flag
78 agaffney 1288
79 agaffney 1285 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
80     src/GLIPortage.py:
81     short circuit and check vdb directly if package begins with '='
82    
83 codeman 1284 8 Feb 2006; Preston Cody <codeman@gentoo.org>
84     added more packages to extra_packages list in IP
85    
86 agaffney 1277 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
87     src/templates/x86ArchitectureTemplate.py:
88     10 tries to create filesystem instead of 3
89 agaffney 1280 src/GLIPortage, src/GLIArchitectureTemplate.py:
90     ignore_missing flag for copy_pkg_to_chroot()
91 agaffney 1277
92 agaffney 1269 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
93     src/GLIPortage.py:
94     copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
95    
96 agaffney 1264 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
97     src/net/server/gliserv.py:
98     fix handling of 404 for real files
99     src/net/server/GLIServerProfile.py:
100     look for 'hostname' in attributes instead of 'name'
101    
102 agaffney 1257 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
103     src/SimpleXMLParser.py:
104     initial support for 'include' in XML files
105 agaffney 1258 src/GLIStorageDevice.py:
106     initial support for %
107 agaffney 1259 src/GLIClientController.py:
108     add debugging statements to pre-install steps
109 agaffney 1257
110 codeman 1253 15 Jan 2006; Preston Cody <codeman@gentoo.org>
111     webgli/configfiles:
112     check for key in etc_files['rc.conf'] to fix key error
113     webgli/timezone: small fix.
114 codeman 1254 webgli/extrapackages: list-type fix
115     webgli/services: same
116     glimd: add/edit_client updates.
117 codeman 1253
118 codeman 1248 12 Jan 2006; Preston Cody <codeman@gentoo.org>
119     added configure.pyhtml to glimd. minor changes
120     to top and add_client. fixed up showargs.
121 codeman 1250 added execute.pyhtml
122     changed register clients line in gliserv for name->hostname.
123     updated TODO.
124 codeman 1248
125 codeman 1246 10 Jan 2006; Preston Cody <codeman@gentoo.org>
126     src/net/server/*:
127     added add/del/edit client/profile.pythml for glimd.
128     updated templates, showclients, and gliserv.
129    
130 agaffney 1245 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
131     src/net/server/*:
132     stupid threading module...
133    
134 codeman 1241 8 Jan 2006; Preston Cody <codeman@gentoo.org>
135     AT: rc.conf -> conf.d/clock
136    
137 agaffney 1223 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
138     src/GLIPortage.py:
139     show 'Calculating dependencies for ...' in subprogress bar at beginning of
140     emerge()
141     src/GLIArchitectureTemplate.py:
142     copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
143     in the chroot
144 agaffney 1228 remove _quickpkg_deps() and _portage_best_{visible,version}()
145 agaffney 1225 src/GLIUtility.py:
146     fail immediately in validate_uri() if provided URI can't be parsed
147 agaffney 1233 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
148 agaffney 1239 debug code in spawn()
149     use lower-level os.read() instead of file.read() because python sucks
150 agaffney 1227 src/templates/x86ArchitectureTemplate.py:
151     basic subprogress reporting for partitioning
152 agaffney 1231 total_steps was 1 too high
153 agaffney 1223
154 agaffney 1221 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
155     src/GLIUtility.py:
156     move parse_vdb_contents() to GLIPortage
157     src/GLIPortage.py:
158     remove all symlink fixups
159 agaffney 1222 ignore 'dir' entries in CONTENTS
160     call tar with -p
161 agaffney 1221
162 codeman 1220 5 Jan 2006; Preston Cody <codeman@gentoo.org>
163     AT: bootsplash is now gensplash
164     gliserv: add advanced_mode to shared_info
165     webgli: Added advanced mode. mostly just disables a few screens.
166    
167 agaffney 1205 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
168     src/GLIPortage.py:
169     get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
170     added emerge()
171 agaffney 1208 update sub-progress after each package is emerged
172     skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
173 agaffney 1211 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
174 agaffney 1216 remove link if it exists before moving content into place
175 agaffney 1205 src/GLIArchitectureTemplate.py:
176     install_packages() now calls emerge() in GLIPortage
177 agaffney 1208 change all calls to self._emerge() to self._portage.emerge()
178     comment out all emerge status checking...using exceptions now
179 agaffney 1214 call copy_pkg_to_chroot() directly for livecd-kernel
180 agaffney 1205
181 agaffney 1198 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
182     src/GLIArchitectureTemplate.py:
183     remove add_pkg_to_world() and copy_pkg_to_chroot()
184 agaffney 1201 copy installer.log to installer.log.failed on install failure
185 agaffney 1202 src/GLIUtility.py:
186     added get_keymaps()
187     spawn() takes any False argument for chroot instead of just None
188 agaffney 1198 src/GLIPortage.py:
189     copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
190 agaffney 1202 change copy_pkg_to_chroot() to work properly with use_root=False
191 agaffney 1204 figure PORTAGE_TMPDIR properly
192 agaffney 1198
193 agaffney 1197 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
194     src/net/server/html/*:
195     converted showclients, load/saveprofile
196    
197 agaffney 1194 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
198     src/GLIPortage.py:
199     exclude packages already in chroot vdb from binary deplist
200 agaffney 1195 chroot to use best_version for chroot's vdb
201 agaffney 1196 src/runtimedeps.py:
202     accept ROOT via commandline instead of env
203 agaffney 1194
204     25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
205 agaffney 1189 src/runtimedeps.py:
206 agaffney 1191 remove passing of ROOT
207 agaffney 1184 src/GLIPortage.py:
208 agaffney 1189 modify get_deps() to get deptree for each package and merge into final list
209 agaffney 1190 remove depgraph class
210     add debugging code to get_deps()
211 agaffney 1189 src/GLIArchitectureTemplate.py:
212     combine code for GRP/compile in install_packages() into one block
213 agaffney 1190 debugging code in install_packages()
214 agaffney 1184
215 agaffney 1194 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
216     src/runtimedeps.py:
217     initial commit
218     src/GLIPortage.py:
219     use separate script for GRP deps
220     remove calls to portage module
221    
222 agaffney 1181 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
223     src/GLIPortage.py:
224     initial commit
225 agaffney 1182 move some of portage function from GLIAT
226 agaffney 1183 flipped around a few function args
227 agaffney 1182 src/GLIArchitectureTemplate.py:
228     revamp install_packages() for new GLIPortage
229 agaffney 1181
230 agaffney 1180 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
231     src/GLIArchitectureTemplate.py:
232     extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
233    
234 agaffney 1176 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
235     src/net/server/gliserv.py:
236     wrap generated code in a class to isolate it a bit better
237     302 redirects work
238 agaffney 1179 don't use cgi.escape() for <% %>
239 agaffney 1177 src/net/server/html/webgli/*:
240     load/save profile
241 agaffney 1178 src/GLIUtility.py:
242     change /sbin/lspci to just lspci
243 agaffney 1176
244 agaffney 1172 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
245     src/GLIClientController.py:
246     change ordering of statements in CC run() while loop to not go past the end
247     of the array
248 agaffney 1173 src/GLIArchitectureTemplate.py:
249     removed redundant bind mounts
250 agaffney 1172
251 codeman 1170 18 Dec 2005; Preston Cody <codeman@gentoo.org>
252     REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
253 codeman 1171 added a diagram by blackace from last night.
254     added the glossary in RTF format.
255 codeman 1170
256 codeman 1166 17 Dec 2005; Preston Cody <codeman@gentoo.org>
257     x86AT: separated out emerge/configure from running of bootloader
258     added MBR drive support to lilo.
259     these changes will likely not work.
260     AT: added setup_and_run_bootloader step.
261    
262 agaffney 1163 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
263     src/net/server/gliserv.py:
264     call generated code in a function
265     src/net/server/html/webgli/*:
266     include top/bottom
267 agaffney 1164 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
268     src/GLIClientCongifuration.py:
269     install mode magic
270 agaffney 1163
271 agaffney 1156 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
272     src/GLIClientController.py:
273     use GLIException when there's an import problem
274 agaffney 1159 added debug code to show install_steps
275 agaffney 1157 src/templates/amd64ArchitectureTemplate.py:
276     add . to import path
277 agaffney 1160 proper path this time: ../../templates
278 agaffney 1162 src/GLIArchitectureTemplate.py:
279     add _portage_best_version() function
280 agaffney 1156
281 codeman 1154 11 Dec 2005; Preston Cody <codeman@gentoo.org>
282     added initial glossary and gimli diagram to the docs directory.
283 codeman 1161 modify gli-dialog to allow editing of the install_profile after loading XML.
284 codeman 1154
285 agaffney 1149 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
286     src/net/server/html/webgli/:
287     converted globaluse, localuse, networkmounts, portagetree, and stageselection
288 agaffney 1150 moved saveclientconfig stuff into clientconfig
289 agaffney 1151 moved saveconfigfiles into config files
290     converted etc_portage and makedotconf
291 agaffney 1152 converted bootloader and kernel
292 agaffney 1153 convert daemons, extrapackages, networking, review, services, timezone, users
293 agaffney 1151 src/net/server/gliserv.py:
294     proper 404 handling for .pyhtml extension
295     HTML escape <% %> stuff
296 agaffney 1152 work around python's sucky regexes
297 agaffney 1153 src/GLIInstallProfile.py:
298     allow set_{rsync,ftp,http}_proxy() to accept empty values
299 agaffney 1149
300 agaffney 1147 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
301     src/net/server/gliserv.py:
302 agaffney 1148 initial commit of Legolas templating engine
303     302 redirects
304 agaffney 1147 src/net/server/html/index.html, src/net/server/webgli_template.html:
305     minor changes for new code
306     src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
307     initial commit of the conversion from the monolithic WebGLIHandler.py to the
308 agaffney 1148 one file per path Legolas goodness
309     partitioning[2-4] done
310 agaffney 1147
311 codeman 1145 5 Dec 2005; Preston Cody <codeman@gentoo.org>
312     webgli: dhcp options in CC and post-install.
313     updated comparison chart.
314 codeman 1146 webgli: etc/portage/* and distcc support added. not too-well tested.
315 codeman 1145
316 agaffney 1138 4 Dec 2005; Preston Cody <codeman@gentoo.org>
317     webgli_template.html: valign=top on left side.
318     webgli: fix bootloader boot_device. now working.
319 codeman 1143 webgli: CC proxy done. post-install proxy in progress.
320 agaffney 1138
321 agaffney 1132 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
322     src/net/server/webgli_template.html:
323     increase padding for content cell to 7px and add colspan=2
324    
325 blackace 1131 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
326     webgli: added graphic bar on top
327     webgli: added hover effects on the links on the left
328     webgli: re-rendered header_bg.png to stretch without artifacts
329    
330 codeman 1128 3 Dec 2005; Preston Cody <codeman@gentoo.org>
331     webgli: make.conf disabling fixes for dynamic_stage3
332     fixed portage snapshot browse popup
333     all changes tested.
334     webgli: add debug mode to CC screen. the screen still needs lots of work.
335    
336 codeman 1122 1 Dec 2005; Preston Cody <codeman@gentoo.org>
337     added debug mode question to gli-dialog
338     added CC proxies to CC networking for gli-dialog
339 codeman 1125 webgli: fixed skip CC networking if connection active
340     webgli: portage snapshot defaults to CD
341     webgli: bootloader mbr drive selection
342     webgli: USE flags unselectable if dynamic_stage3
343     webgli: manual extra packages and save button.
344    
345 agaffney 1119 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
346     src/GLIUtility.py:
347     change ping count to 2
348 agaffney 1121 docs/comparison.html
349     initial commit
350 agaffney 1119
351 agaffney 1113 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
352     src/templates/x86ArchitectureTemplate.py:
353     fix map() issue with grub code
354     replace kernel_names and initrd_names loops with one-liners
355    
356 codeman 1102 27 Nov 2005; Preston Cody <codeman@gentoo.org>
357     gli-dialog won't let you dynamic stage3 without systempkgs.txt.
358 codeman 1105 initial gli-dialog support for recommended partitioning layout and clear.
359 codeman 1106 failure cleanup now an option for gli-dialog.
360 codeman 1114 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
361     added comparison list and updated TODO!
362 codeman 1102
363 agaffney 1097 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
364     src/GLIArchitectureTemplate.py:
365     fix to stage1() debug code
366 agaffney 1098 fix to stage2() debug code
367 agaffney 1097
368 codeman 1096 26 Nov 2005; Preston Cody <codeman@gentoo.org>
369     some more bootloader code fixes. forgot boot_device != mbr_device.
370 agaffney 1097
371     25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
372     src/GLIStorageDevice.py:
373     fix to unallocated space merging when last one is after part 4
374 codeman 1096
375 agaffney 1088 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
376     src/GLIArchitectureTemplate.py:
377     small fix to debugging code in copy_pkg_to_chroot()
378    
379 codeman 1086 23 Nov 2005; Preston Cody <codeman@gentoo.org>
380 codeman 1096 more bugfixes with bootloader code
381     gli-dialog side appears to work
382 codeman 1086
383 codeman 1077 21 Nov 2005; Preston Cody <codeman@gentoo.org>
384 codeman 1080 initial adding of boot_device to backend.
385     initial boot_device support added to gli-dialog.
386 codeman 1096 some fixes of my poor coding
387 codeman 1077
388 codeman 1080 20 Nov 2005; Preston Cody <codeman@gentoo.org>
389 codeman 1075 converted gli-dialog to use the install_package_list.
390     gtkfe has already been converted by AllanonJL
391 codeman 1076 new way working in gli-dialog now and added to webgli.
392 codeman 1077 added set/get_boot_device() to IP
393 codeman 1075
394 codeman 1073 19 Nov 2005; Preston Cody <codeman@gentoo.org>
395     get_install_package_list added to InstallProfile. This can be used by the FEs
396    
397 agaffney 1070 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
398     src/templates/x86ArchitectureTemplate.py:
399     call ls with '-1 --color=no'
400    
401 codeman 1069 16 Nov 2005; Preston Cody <codeman@gentoo.org>
402 codeman 1080 added warning (#9) to GRP ppl about stage3 tarballs
403 codeman 1069
404 agaffney 1068 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
405     src/GLIArchitectureTemplate.py:
406     change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
407     confused
408    
409 codeman 1066 13 Nov 2005; Preston Cody <codeman@gentoo.org>
410     removed protocols from rc.conf screens
411     finished initial rc.conf and make.conf in webgli
412    
413 agaffney 1062 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
414     src/net/server/gliserv.py:
415     add -h option to usage()
416 agaffney 1063 show time and request URI in debug mode
417 agaffney 1064 show client IP in debug mode
418 agaffney 1065 just use IP instead of trying to do a reverse lookup
419 agaffney 1062
420 agaffney 1060 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
421     src/net/server/gliserv.py:
422     'classier' 401 message
423     proper commandline parsing
424     help via -h
425     user/pass can be specificed via commandline option
426    
427 agaffney 1059 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
428 agaffney 1057 src/net/server/gliserv.py:
429 agaffney 1059 basic HTTP auth
430    
431     10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
432     src/net/server/gliserv.py:
433 agaffney 1057 dynamic module reloading (yipee!)
434 agaffney 1058 send 'Last-Modified' header for real files
435     respond to HEAD with just headers
436 agaffney 1057 src/net/server/handlers/WebGLIHandler.py:
437     icons for drives
438    
439 agaffney 1042 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
440     src/net/server/handlers/WebGLIHandler.py:
441     initial 'pretty' partition table display support
442 agaffney 1043 clicking partition in 'pretty' display works instead of radio buttons
443 agaffney 1044 radio buttons and pretty display work together
444     META redirect instead of javascript
445     pretty display stretches across entire screen
446 agaffney 1046 'Recommended layout' and 'Clear drive' functions
447 agaffney 1047 properly catch exceptions from do_recommended()
448 agaffney 1049 src/GLIArchitectureTemplate.py:
449     replace preinst, copy, postinst, rm steps with qmerge
450 agaffney 1050 whoops...that shouldn't have been commented out
451 agaffney 1051 create image_dir with -p in copy_pkg_to_chroot()
452 agaffney 1052 more generic of symlink crappiness
453 agaffney 1053 new copy_pkg_to_chroot() actually works now
454 agaffney 1042
455 agaffney 1037 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
456     src/GLIStorageDevice.py:
457     initial generic disk support
458 agaffney 1040 fixes for add_partition() code
459 agaffney 1038 src/net/server/handlers/WebGLIHandler.py:
460     added support for creating generic disks
461 agaffney 1040 add new partition working
462 agaffney 1041 save and delete partitions
463 agaffney 1037
464 codeman 1034 6 Nov 2005; Preston Cody <codeman@gentoo.org>
465     webgli: Partitioning making progress.
466    
467 agaffney 1032 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
468     src/GLIArchitectureTemplate.py:
469     copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
470     image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
471     dir) and works around /etc/gconf symlink problem
472    
473 codeman 1031 5 Nov 2005; Preston Cody <codeman@gentoo.org>
474     webgli: lots of updates. preliminary partitioning. extra packages works.
475    
476 agaffney 1029 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
477     src/net/server/gliserv.py:
478     httpd now supports HTTPS and falls back to HTTP if not available
479 agaffney 1030 make fallback actually work
480 agaffney 1029 src/net/server/SecureXMLRPCServer.py:
481     SecureSocketServer is now threaded
482    
483 agaffney 1026 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
484     src/net/client/gliclient.py:
485     try to use HTTPS for XMLRPC first and fallback to HTTP
486 agaffney 1028 pretend mode
487 agaffney 1027 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
488     HTTPS XMLRPC goodness from samyron
489 agaffney 1028 pass name of certificate
490 agaffney 1026
491 codeman 1025 31 Oct 2005; Preston Cody <codeman@gentoo.org>
492     wegli: daemons and services screens done.
493    
494 codeman 1021 30 Oct 2005; Preston Cody <codeman@gentoo.org>
495     webgli: networking and users screens
496     added return_redirect to handler.py
497 codeman 1022 loading and saving install/client profiles works for webgli now
498     Review also done
499 agaffney 1033
500     *GLI-0.2 (27 Oct 2005)
501 codeman 1025
502 agaffney 1009 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
503     src/templates/x86ArchitectureTemplate.py:
504     properly check for bootloader emerge exist status with exitsuccess()
505 agaffney 1010 log output of grub install command
506 agaffney 1011 add --batch --no-floppy to grub command
507 agaffney 1013 grubinstallstring only gets logged if debug is on
508 agaffney 1012 src/GLIUtility.py:
509     update progress bar to 100% when process finishes
510 agaffney 1009
511 agaffney 1002 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
512     src/GLIClientController.py:
513     added debugging code for the interaction between the 2 threads via Event()
514 agaffney 1003 src/GLIUtility.py:
515     doubled the buffer size in spawn()
516 agaffney 1004 bump buffer size up to 16384
517     only report progress in 5% increments
518 agaffney 1005 src/GLIArchitectureTemplate.py:
519     kernelpkgs.txt support code
520 agaffney 1006 above disabled because it sucks
521 agaffney 1007 added add_pkg_to_world()
522 agaffney 1002
523 agaffney 1001 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
524     src/GLIArchitectureTemplate.py:
525     use tar | tar to copy files in copy_pkg_to_chroot()
526     extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
527    
528 codeman 995 23 Oct 2005; Preston Cody <codeman@gentoo.org>
529     DEBUGGING ADDED TO AT. verbose field added to CConfig.
530    
531 agaffney 993 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
532     src/net/server/gliserv.py:
533     / maps to index.html
534     look for actual files in html/
535     src/net/html:
536     new template
537 agaffney 998 src/GLIUtility.py:
538     added parse_vdb_contents()
539     src/GLIArchitectureTemplate.py:
540     added copy_pkg_to_chroot()
541     added debug code to dynamic-stage3
542 agaffney 999 switch dynamic-stage3 to new method
543     lots of bug fixes from adding debug code
544 agaffney 993
545 codeman 983 22 Oct 2005; Preston Cody <codeman@gentoo.org>
546     webgli initial bootloader support + changed make.conf.
547 codeman 985 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
548 codeman 983
549 agaffney 980 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
550 agaffney 982 src/GLIUtility.py:
551 agaffney 980 horrible tangled mess of code that is tarball unpacking subprogress display
552 agaffney 981 add unpack progress to portage snapshot
553 agaffney 982 use read() instead of readlines() in spawn()
554     only update progress bar for whole percents
555 agaffney 980
556 agaffney 976 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
557     src/templates/x86ArchitectureTemplate.py:
558     change call to 'grub' to use GLIUtility.exitsuccess()
559 agaffney 977 add definition of 'build_mode' in _configure_lilo()
560 agaffney 976 src/misc/updategtkfe, src/misc/updateglid:
561     fix so subshell is called in root shell
562    
563 agaffney 975 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
564     src/net/server/handlers/WebGLIHandler.py:
565     stage screen launches URI browser in sized window with various properties set
566    
567 agaffney 971 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
568     src/misc/updategtkfe:
569     updated to actually work
570 agaffney 972 remove previous snapshot and extracted dir before downloading
571 agaffney 973 src/misc/updateglid:
572     updated to actually work
573 agaffney 974 src/templates/x86ArchitectureTemplate.py:
574     fixed bug where grub code was looking for 'root+root+file_name2'
575 agaffney 971
576 agaffney 968 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
577     src/net/server/handlers/WebGLIHandler.py:
578     URI browser
579 agaffney 970 added mirror selection
580 agaffney 969 src/GLIUtility.py:
581     ls via ssh strips off ending *
582 agaffney 968
583 codeman 965 16 Oct 2005; Preston Cody <codeman@gentoo.org>
584     more updates to webgli. stage selection.
585    
586 codeman 961 11 Oct 2005; Preston Cody <codeman@gentoo.org>
587     updated webgli with preliminary Network Mounts support.
588    
589 codeman 952 9 Oct 2005; Preston Cody <codeman@gentoo.org>
590     GenDialog: string formatting and yes/no label fixes.
591     added WebGLI template for gliserv.py
592     added WebGLIHandler as well as a definition for it in gliserv.py
593     updates to the webgli files even though they won't be there for long.
594 codeman 958 Utility: remove exception for non-existant grppkgs.txt until the new livecd
595     goes public.
596 codeman 952
597 agaffney 955 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
598     src/net/server/gliserv.py:
599     override dict to not be so anal
600 agaffney 949 main server now loads separate module to handle requests
601 agaffney 955 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
602 agaffney 949 split out profile URLs into separate handler function
603 agaffney 950 move handlers into subdirectory
604 agaffney 956 add Welcome and Clients handlers
605 agaffney 949
606 agaffney 944 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
607     src/GLIUtility.py:
608     raise exception if password prompt received twice
609    
610 agaffney 943 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
611 agaffney 944 src/GLIUtility.py:
612 agaffney 943 removed rot13ify()
613    
614     1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
615 agaffney 935 src/net/server/gliserv.py:
616     allow for param to be passed multiple times in GET
617 agaffney 940 no XMLRPC functions return None
618 agaffney 941 modify POST request parsing to only create a list if needed
619 agaffney 942 fix GET request parsing so the list creation for multiple values works
620 agaffney 940 src/net/client/gliclient.py:
621     various typo and type mismatch fixes
622     exit after exception
623 agaffney 935
624 agaffney 933 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
625     src/net/client/gliclient.py:
626     initial commit
627 agaffney 934 pass MAC to XMLRPC functions
628     src/net/server/GLIServerProfile.py:
629     rename GLIClientsProfiles to GLIServerProfile
630 agaffney 933
631 agaffney 930 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
632     src/net/server/gliserv.py:
633     now handles POST requests
634     move majority of request handling code to common_handler() to reduce code
635     duplication
636 agaffney 931 profile loading
637     client reg via XMLRPC goes into SharedInfo()
638     /showclients redesign
639     template fixes
640 agaffney 932 allow handler functions to add/change headers
641     save profile
642 agaffney 930
643 agaffney 929 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
644     src/net/server/GLIClientsProfiles.py:
645     initial commit
646     src/net/server/template.html:
647     initial commit
648     src/net/server/gliserv.py:
649     add template mojo
650    
651 agaffney 928 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
652     src/net/server/gliserv.py:
653     XMLRPC mojo
654    
655 agaffney 919 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
656     src/GLIArchitectureTemplate.py:
657     add code in _edit_config() to comment line where variable is defined
658     previously
659 agaffney 920 insert new line under previous definition of variable if it exists
660 agaffney 921 small _edit_config() cleanup
661 agaffney 923 src/GLIStorageDevice.py:
662     add clear_partitions() function
663 agaffney 924 new sizes for recommended partition layout
664 agaffney 925 automatically calculate swap size for recommended layout
665 agaffney 919
666 agaffney 918 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
667     src/templates/x86ArchitectureTemplate.py:
668     fat16 mojo
669    
670 agaffney 914 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
671     src/GLIStorageDevice.py:
672     prevent do_recommended() from being run twice
673 agaffney 916 rewrite do_recommended() to be more robust
674 agaffney 917 src/GLIArchitectureTemplate.py:
675     rework _edit_config() to not write duplicate entries
676 agaffney 914
677 agaffney 912 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
678     src/GLIStorageDevice.py:
679     added do_recommended() function to automatically created 256M/1G/* layout
680    
681 codeman 907 17 Sep 2005; Preston Cody <codeman@gentoo.org>
682     src/gli-dialog.py: added set_distcc to the list
683     GenDialog: added set_distcc. untested.
684     IP: added install_distcc flag.
685     AT: added install_distcc function based on the flag. runs after build_kernel
686 codeman 911 changed AT spawn command for distcc for nodeps.
687 codeman 907
688 agaffney 906 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
689     src/GLIUtility.py:
690     add rot13ify() function
691    
692 codeman 904 16 Sep 2005; Preston Cody <codeman@gentoo.org>
693     src/GenDialog.py
694 codeman 905 added a sentence of text. unchecking support added.
695 codeman 904
696 codeman 901 15 Sep 2005; Preston Cody <codeman@gentoo.org>
697     src/GLIUtility.py
698     added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
699     src/GenDialog.py
700 codeman 902 still working on extra_packages. transformed the list to new format.
701     added GRP indication to list. untested.
702 codeman 901 TODO lists updated.
703     src/fe/dialog/gli-dialog.py
704     spelling mistook.
705    
706 agaffney 900 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
707     src/GLIUtility.py:
708     get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
709    
710 agaffney 889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
711     src/GLIUtility.py:
712     add get_directory_listing_from_uri()
713     add http support to above
714 agaffney 892 add ftp support to above
715 agaffney 893 add scp support to above
716 agaffney 891 src/GLIArchitectureTemplate.py:
717     "0" instead of 0 for key of single-element dict passed to _edit_config()
718 agaffney 889
719 codeman 887 5 Sep 2005; Preston Cody <codeman@gentoo.org>
720     value_only -> only_value
721    
722 codeman 881 3 Sep 2005; Preston Cody <codeman@gentoo.org>
723     gutted out all of etc_portage structure since it is now all handled by
724     etc_files
725    
726 agaffney 874 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
727     src/GLIArchitectureTemplate.py:
728     install_packages() sends progress update notifications
729 agaffney 876 src/templates/x86ArchitectureTemplate.py:
730     increase sleep to 5s between format tries
731 agaffney 882 src/GLIClientController.py:
732     pass 'self' to AT instead of 'self._pretend'
733 agaffney 874
734 codeman 873 2 Sep 2005; Preston Cody <codeman@gentoo.org>
735     logger -> logger.log in x86AT
736    
737 codeman 870 1 Sep 2005; Preston Cody <codeman@gentoo.org>
738     added set_etc_portage to IP. debugging gli-d's support for it.
739    
740 agaffney 869 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
741     src/templates/x86ArchitectureTemplate.py:
742     switch to 3 tries for mkfs instead of looping waiting for dev node to exist
743    
744 agaffney 857 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
745     src/GLIArchitectureTemplate.py:
746     add _portage_best_version() function and rework install_packages() to allow
747     for future X of Y tracking
748 agaffney 860 Use best_visible instead of best_version
749 agaffney 862 tracked down and fixed missing = causing empty install extra packages
750 agaffney 864 use = when emerging also
751 agaffney 865 quickpkg hokey pokey
752 agaffney 867 run _get_packages_to_emerge() again with -pk
753 agaffney 857
754 codeman 848 22 Aug 2005; Preston Cody <codeman@gentoo.org>
755     src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
756     the end of install_packages.
757 codeman 850 added updateglid to /src/misc
758 codeman 851 updated all core files with new GPL notice and copyright statement.
759 codeman 848
760 agaffney 839 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
761     src/GLIUtility.py:
762     fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
763     a snapshot in /mnt/cdrom/snapshots/
764 agaffney 842 get_snapshot_from_cd() adds file:// at the beginning
765 agaffney 846 change calls to extra package special case functions to 'self.blah'
766 agaffney 839
767 codeman 830 21 Aug 2005; Preston Cody <codeman@gentoo.org>
768     src/ArchTemplate: changed "voodoo".
769 codeman 831 changed order of portage sync methods. made a fallback to webrsync if
770     normal emerge sync fails.
771 codeman 836 removed get_sources_from_cd because it is obsolete.
772     add special cases to install_packages. remove fatal exception on package
773     install failure b/c the box will still be bootable.
774 codeman 837 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
775     handled in the FEs.
776 codeman 838 src/GenDialog: added a bunch of code for dealing with x11-based packages.
777     awaiting testing.
778 codeman 830
779 agaffney 826 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
780     src/GLIStorageDevice.py:
781     global try/except block around fs resizable detection code
782 agaffney 828 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
783     install-failed cleanup function
784 agaffney 826
785 codeman 825 18 Aug 2005; Preston Cody <codeman@gentoo.org>
786     x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
787    
788 codeman 812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
789 codeman 814 GLIGenDialog:
790     add drive choices for loaded configs.
791     force snapshot for dynamic_stage3
792     init the snapshoturi input to the cd snapshot if not already selected.
793     if dynamic_stage3, skip the make.conf step.
794     GLIUtility: add get_cd_snapshot_uri() for local snapshots.
795     this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
796 codeman 812
797 agaffney 811 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
798     src/GLIArchitectureTemplate.py:
799     manually call MAKEDEV in stage3-dynamic code
800 agaffney 813 copy /etc/inittab.old to /etc/inittab in chroot
801 agaffney 815 src/GLIUtility.py:
802     add beginning of validate_uri() function
803 agaffney 817 add file:/// support to validate_uri()
804 agaffney 822 single quotes when setting livecd password
805 agaffney 811
806 agaffney 807 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
807     src/GLIGenDialog.py:
808     change getmountpoint() to get_mountpoint()
809 agaffney 808 src/misc/updategtkfe:
810     committed script to automatically download latest snapshot and run gtkfe
811 agaffney 809 src/templates/x86ArchitectureTemplate.py:
812     fix _configure_lilo_add_windows() for IP -> GLISD stuff
813 agaffney 810 src/GLIArchitectureTemplate.py:
814     give tmp_minor an initial value in mount_local_partitions so that the value
815     remain from the previous drive
816 agaffney 807
817 agaffney 805 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
818     src/templates/x86ArchitectureTemplate.py:
819     Fix _configure_lilo() for IP using GLISD stuff
820 agaffney 806 src/GLIArchitectureTemplate.py:
821     install_cron_daemon() treats "none" specially
822 agaffney 805
823 codeman 801 14 Aug 2005; Preston Cody <codeman@gentoo.org>
824     old patch from Steven Mertens to resolve bug #96642
825 codeman 802 numerous asthetic changes to GenDialog, no real functionality changes though.
826     strings renamed for global use if necessary.
827 codeman 803 fix all three parts of bug 102291
828 codeman 804 disable set_etc_portage until fully-written.
829 codeman 801
830 agaffney 799 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
831     src/GLIClientController.py:
832     lower-case http/ftp proxy envvars
833    
834 agaffney 797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
835     src/GLIClientController.py:
836     log end of pre_install steps to aid in debugging
837 agaffney 798 src/templates/x86ArchitectureTemplate.py:
838     change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
839 agaffney 797
840 agaffney 795 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
841     src/GLIArchitectureTemplate.py
842     check to make sure that the device node we're wait for to exist isn't of
843     type 'free'
844    
845 agaffney 792 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
846     src/GLIGenDialog.py:
847     convert install_packages to list in set_extra_packages()
848 agaffney 793 check return code of checklist() call in "Manual" section
849 agaffney 794 *actually* fix the first problem
850 agaffney 792
851 robbat2 790 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
852     "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
853     -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
854    
855 agaffney 789 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
856     src/GLIArchitectureTemplate.py:
857     re-fix net.eth1+ symlink code...wtf is wrong with cvs?
858    
859 agaffney 787 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
860     Add CDATA support to SimpleXMLParser and add utility functions for it.
861    
862 robbat2 786 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
863     src/GLIArchitectureTemplate.py:
864     Fix case where vixie-cron is specified as a full package atom, as we still
865     don't want to run 'crontab /etc/crontab' for it.
866    
867 agaffney 788 *GLI-0.1 (3 Aug 2005)
868    
869 codeman 764 30 Jul 2005; Preston Cody <codeman@gentoo.org>
870     add scp to list of is_uri() so GenDialog doesn't complain.
871 codeman 769 fixed livecd-kernel bug in bootloader code.
872 codeman 773 fixed gendialog for dynamic_stage3 instead of "networkless"
873     change bootloader to allow for both initrd and initramfs.
874 codeman 777 fix IP for dynamic_stage3.
875 codeman 780 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
876 codeman 777
877 codeman 769 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
878     Added full scp:// URI support to get_uri() in GLIUtility
879 agaffney 766 Remove "networkless" from dynamic stage3 if locic.
880     Remove print statement from scp:// code.
881 agaffney 767 Change scp code to check for "assword: " instead of "Password:"
882 agaffney 768 Fix post-install network code to create net.eth1+ symlink correctly
883 agaffney 770 Check to make sure pkg can be split on / and some debugging code
884 agaffney 771 Add 2>dev/null to emerge call in _get_packages_to_emerge()
885 codeman 777 SimpleXMLParser handles True/False/None correctly now
886 agaffney 778 Comment out above fix
887 agaffney 781 Add partitioning wait-for-device-to-exist code to mount_local_partitions
888 codeman 764
889 samyron 762 28 Jul 2005; Scott Myron <samyron@gentoo.org>
890     Removed a FIXME in the GLIClientConfiguration that is no
891     longer needed.
892    
893 agaffney 760 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
894     Default to x86 in ClientConfig
895 agaffney 761 Typo in build-a-stage3 code.
896     Remove MAKEDEV call in build-a-stage3 postscript.
897 agaffney 760
898 codeman 757 26 Jul 2005; Preston Cody <codeman@gentoo.org>
899     Rewrote init of IP for gli-d. Other GenDialog updates.
900     allow network_type to be None in CConfig.
901    
902 agaffney 755 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
903     Add _dynamic_stage3 option to IP.
904     Add check for that option to dynamic stage3 code in ArchTemplate.
905 agaffney 756 Fix code to determine default route in get_eth_info() in GLIUtility.
906     Fix serialization of dns-servers in ClientConfig.
907 agaffney 755
908 codeman 754 24 Jul 2005; Preston Cody <codeman@gentoo.org>
909     changed default values of cron/logger in IP.
910     moved GenDialog IP init out to the individual files. gli-dialog's version
911     will change quite a bit.
912    
913 codeman 750 22 Jul 2005; Preston Cody <codeman@gentoo.org>
914     added ppcArchTemplate. blank now. working on yaboot.
915 codeman 751 modified ArchTemplate for amd64 and ppc custom kernels.
916     skeleton implementation of _configure_yaboot.
917     small fixes to other templates.
918 codeman 750
919 codeman 747 21 Jul 2005; Preston Cody <codeman@gentoo.org>
920     GenDialog updates. changed comment in IP.
921    
922 robbat2 741 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
923 robbat2 743 src/GLIInstallProfile.py:
924     Fix codeman's screwup of changing the service seperator to ',' in the parser
925     without changing it in the serialization code! Also document this in a
926     comment so you find it easier. Everybody needs to make sure they update
927     their install profiles!
928    
929     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
930 robbat2 742 src/GLIArchitectureTemplate.py:
931     Fix casting of list to string and concat of None with string, as well as
932     commented prototype of checking that mounting actually worked (found a case
933     where mount can return success, but the mount won't be done).
934    
935     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
936 robbat2 740 src/templates/x86ArchitectureTemplate.py:
937 robbat2 741 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
938     checking for the device, and sleeping 1 second each time.
939    
940     07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
941     src/templates/x86ArchitectureTemplate.py:
942 robbat2 740 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
943     bootloader works again. Also rename _install_{grub,lilo} to
944     _configure_{grub,lilo} since they don't install the loaders anymore
945     themselves.
946    
947 codeman 738 7 Jul 2005; Preston Cody <codeman@gentoo.org>
948     fix global USE flags to not include the arch types at the end.
949     updates to GenDialog and gli-d.
950    
951 codeman 734 6 Jul 2005; Preston Cody <codeman@gentoo.org>
952     fixing bootloader code for no initrd and initrd->initramfs naming change.
953    
954 agaffney 733 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
955     Proper comments and parameters to GLIException in install_mta()
956 agaffney 736 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
957 agaffney 737 Add strip() to list_mirrors(), list_subarch_from_mirror() and
958     list_tarball_from_mirror() to eliminate blank last item.
959 agaffney 733
960 agaffney 731 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
961     Added stage3 generation code.
962    
963 codeman 730 5 Jul 2005; Preston Cody <codeman@gentoo.org>
964     Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
965     Mild changes to GenDialog.
966    
967 agaffney 729 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
968     Remove separate install step configure_rc_conf() since it's handled by
969     update_config_files()
970     Make a copy of newvalues in _edit_config() so quotes aren't added when the
971     function is called twice on the same file.
972    
973 agaffney 726 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
974     Missing \ in sed in _get_packages_to_emerge()
975 agaffney 727 Removed explicit emerging of hotplug and no longer add it to the runlevel.
976 agaffney 728 Check in _quickpkg_deps() to ignore blank package names returned from
977     _get_packages_to_emerge()
978 agaffney 726
979 codeman 725 28 Jun 2005; Preston Cody <codeman@gentoo.org>
980     fixed agaffney's missing = and extra : in x86AT. commented out crashing line
981     in the dialog.py gauge code.
982    
983 agaffney 720 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
984     Add code to update_config_files() to go through etc_files and update stuff.
985 agaffney 721 Check to see that _etc_files['make.conf'] exists in get_make_conf()
986 agaffney 724 Only use float() in partition xml parsing code if type == "free"
987 agaffney 720
988 codeman 718 28 Jun 2005; Preston Cody <codeman@gentoo.org>
989     finished almost all internationalization of GenDialog.
990 codeman 719 attempt at fixing rc.conf function. moved 3 generate functions out of
991 codeman 722 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
992 codeman 723 added dialog.py to the fe/dialog directory so it actually gets used.
993 codeman 718
994 agaffney 716 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
995     Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
996    
997 codeman 715 27 Jun 2005; Preston Cody <codeman@gentoo.org>
998     fix extra entry in list_mirrors()
999     beginning internationalization runthrough.
1000    
1001 codeman 713 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1002     added dialog.py to /src temporarily until it gets accepted upstream.
1003 codeman 714 fix for unused value in form in dialog.py and changed heights.
1004     fix GenDialog forms.
1005 codeman 713
1006 codeman 710 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1007     Changed hostname/domainname for new baselayout.
1008     Changed _add_to_runlevel errors to logs.
1009     Updated TODO list to show status of GenDialog
1010     More updates to GenDialog including two checklists that probably won't work.
1011 codeman 711 update IP to use comma-separated list instead of space separated for services.
1012 codeman 710
1013 codeman 707 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1014     Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1015     GenDialog as it gets closer to completion.
1016    
1017 agaffney 704 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1018 agaffney 705 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1019     instead of int() in add_partition_device_partition() for minor (closes 96804)
1020 agaffney 704
1021     21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1022     Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1023     instead of 'interfaces[interface][1]' since DHCP uses that field for its
1024     options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1025    
1026 agaffney 697 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1027 agaffney 698 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1028 agaffney 699 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1029 agaffney 700 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1030 agaffney 704 Fix undefined variable 'output' issue in spawn().
1031 agaffney 697
1032 codeman 696 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1033     More updates to GenDialog and gli-d.
1034    
1035 agaffney 695 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1036     Modify list_mirrors() to return a list of mirror URL/name pairs.
1037    
1038 codeman 694 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1039     Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1040     get subarch.
1041    
1042 agaffney 691 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1043     Backend partitioning will create disklabel is none exists. Installprofile
1044 agaffney 692 defaults to "" now instead of "msdos" for disklabel type. Fix for
1045     mount_local_partitions() to remember device along with minor in the
1046 agaffney 693 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1047     add else block to log unsupported netmount types to mount_network_shares()
1048 agaffney 691
1049 robbat2 686 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1050     src/GLIArchitectureTemplate.py:
1051 robbat2 690 Refactor kernel_compile common stuff, fix 2.4 build process.
1052     src/fe/cli/clife.py:
1053     Logging system.
1054     src/GLIUtility.py, src/GLIStorageDevice.py:
1055     Add comments about re-writes needed for boxes without sysfs.
1056    
1057     15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1058     src/GLIArchitectureTemplate.py:
1059 robbat2 686 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1060     'make dep' call for custom compile. build_mode support for prepare-only and
1061     none types completed. custom compile function chains shell functions in
1062     spawned script, to allow for catching all errors.
1063    
1064 codeman 685 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1065     fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1066     and GenDialog. other gendialog updates as well. kernel updates untested.
1067    
1068 robbat2 680 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1069     src/GLIInstallProfile.py:
1070     Change structure of etc-portage stuff. The serialization was broken before my
1071     last commit, and I am the only person that's ever used it. The new schema is
1072     as follows:
1073     <etc-portage>
1074     <file name="package.mask"/>
1075     <file name="package.unmask">
1076     <entry atom="sys-kernel/openmosix-sources"/>
1077     </file>
1078     <file name="package.use">
1079     <entry atom="sys-libs/db">
1080     -java
1081     </entry>
1082     <entry atom="dev-libs/cyrus-sasl">
1083     -ldap
1084     </entry>
1085     </file>
1086     </etc-portage>
1087    
1088    
1089 robbat2 679 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1090     src/GLIInstallProfile.py:
1091     Add new entry for gli-profile/kernel-build-method item. Add missing
1092     serialize_etc_portage (temporary). Make serialize_make_conf always print the
1093     keys in the same order.
1094    
1095 robbat2 675 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1096     src/GLIArchitectureTemplate.py:
1097 robbat2 677 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1098     was repeatedly appended to make.conf.
1099    
1100     13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1101     src/GLIArchitectureTemplate.py:
1102 robbat2 675 Put some Linux-2.6 specific code under a if statement. Store list of
1103     successfully mounted swap device for using swapoff. Add proper error checking
1104     to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1105     'file'. Clean up some redundant code (thanks to pychecker).'
1106    
1107 agaffney 668 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1108 agaffney 670 Fix typos: get_extended() instead of get_extended_partition(). Added
1109 agaffney 671 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1110     Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1111 agaffney 668
1112 allanonjl 667 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1113     GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1114     in add_network_interface.
1115    
1116 robbat2 664 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1117     ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1118     usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1119 robbat2 665 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1120     prepare_chroot.
1121 robbat2 664
1122 robbat2 663 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1123     +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1124     +src/fe/installer-gtk:
1125     Add new automated CLI frontend. Add scripts that are the intended means to
1126     use each frontend.
1127    
1128 robbat2 652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1129 robbat2 663 src/GLIClientController.py:
1130     Add null type to network config, for cases where the interface is already up
1131     and should not be touched (netboot for example).
1132    
1133     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1134 robbat2 652 src/GLIArchitectureTemplate.py:
1135 robbat2 663 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1136     string!. Try to use binary packages if available by default.
1137    
1138     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1139     src/GLIArchitectureTemplate.py:
1140 robbat2 656 More error checking for _add_to_runlevel, to ensure that the init script
1141     actually exists before we try to add it. set_services phase must take place
1142     after the package installation, otherwise the init scripts might not exist.
1143     Find the correct init script for the cron and logging daemons, and add that
1144     instead of the package atom.
1145    
1146     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1147     src/GLIArchitectureTemplate.py:
1148 robbat2 655 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1149     usage of 'file' to 'contents' for the variable name, as it shadows
1150     __builtin__.file.
1151    
1152     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1153     src/GLIArchitectureTemplate.py:
1154 robbat2 652 Add MTA install code, and include MTA install phase. Ensure
1155     PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1156     for 'none' kernel config for build_kernel phase. Put kernel_script in
1157     /var/tmp instead of /root for build_kernel phase.
1158    
1159 robbat2 650 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1160     Rename mta variables to match syslog/cron variables.
1161    
1162 robbat2 648 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1163 robbat2 649 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1164     src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1165     src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1166     src/templates/.cvsignore, src/tests/.cvsignore:
1167     Refactor partition formatting again to include error checking. Allow 'none'
1168     for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1169    
1170     11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1171 robbat2 648 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1172     Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1173     only have a single spawn call.
1174    
1175 codeman 647 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1176     refixed samyron's fix of set_architecture_template.
1177    
1178 agaffney 646 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1179     Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1180     be executable.
1181    
1182 samyron 643 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1183     Fixed one of the FIXME's in the ClientConfiguration. There is now some
1184     error checking when you call set_architecture_template.
1185    
1186 codeman 641 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1187     moved the mkfsopts input to the partition options menu instead of the during
1188     the creation process. updated GenDialog to say it supports reiserfs v3.
1189    
1190 robbat2 636 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1191     src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1192     Complete support for 'mkfsopts' parameter in main system and dialogfe.
1193     Add support for other partition types to dialogfe.
1194     Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1195     avoid integer overflows and wraparounds.
1196    
1197 agaffney 631 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1198     Removed start/end from XML output and added mkfsopts to partitioning info.
1199 agaffney 633 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1200 agaffney 634 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1201 agaffney 639 in GLIClientConfiguration. Change from .1 and .9 to constants for
1202     partitioning. Fix free space overwriting bug. Remove a few unused functions
1203 agaffney 640 from rewrite. Fix call to get_partition_at()
1204 agaffney 631
1205 codeman 630 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1206     Updates to GenDialog and dialogfe.
1207    
1208 agaffney 627 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1209 agaffney 628 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1210 agaffney 627
1211 codeman 626 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1212     more GenDialog updates to partitioning.
1213    
1214 codeman 625 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1215     Indenting issue in GLISD/get_ordered_partition_list.
1216     updates to GenDialog partitioning and added default UTC for timezone in IP.
1217    
1218 agaffney 624 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1219     Added GLISD.get_model()
1220    
1221 codeman 623 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1222     Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1223     More updates to GenDialog :)
1224    
1225 agaffney 622 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1226     Added get_interface_realname() function.
1227    
1228 codeman 618 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1229     Added auto-save of CConfig and copying to new /root after install.
1230     yet even more GenDialog updates.
1231    
1232 codeman 616 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1233     removed print statement from GLISD. more updates to GenDialog.
1234    
1235 agaffney 608 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1236 agaffney 610 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1237 agaffney 611 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1238 agaffney 615 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1239     places in GLIClientConfiguration.
1240 agaffney 608
1241 agaffney 599 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1242     Fix mount_local_partitions(), configure_fstab(), and
1243 agaffney 600 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1244 agaffney 601 A few more fixes for templates/x86Archtemplate
1245 agaffney 599
1246 codeman 597 27 May 2005; Preston Cody <codeman@gentoo.org>
1247     Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1248     a work in progress.
1249    
1250 agaffney 596 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1251     Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1252     directly. GLISD can now handle data imported from XML.
1253    
1254 agaffney 595 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1255     Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1256     handle blank (no disklabel) disks.
1257    
1258 codeman 594 20 May 2005; Preston Cody <codeman@gentoo.org>
1259     HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1260     up, documented, and separated out serialization and grouped all sections.
1261    
1262 codeman 593 19 May 2005; Preston Cody <codeman@gentoo.org>
1263     Reorganization of ClientConfiguration and gutting of unused functions.
1264     Removed verbose option from CC. Moved import statement in IP and CConfig up.
1265    
1266 codeman 591 18 May 2005; Preston Cody <codeman@gentoo.org>
1267     Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1268    
1269 agaffney 588 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1270 agaffney 589 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1271 agaffney 590 partitioning. CC serializes install profile to disk and prepare_chroot()
1272     copies it into /mnt/gentoo/root
1273 agaffney 588
1274 agaffney 585 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1275     Moved URI parsing into new function parse_uri()
1276    
1277 agaffney 583 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1278     Added XMLParser module.
1279    
1280 agaffney 580 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1281     Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1282 agaffney 581 Minor fix to is_uri() regex to allow hyphens in hostname.
1283 agaffney 580
1284 codeman 577 12 May 2005; Preston Cody <codeman@gentoo.org>
1285     Updated finishing_cleanup for new unmounting method from agaffney.
1286    
1287 agaffney 575 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1288 agaffney 576 Fix GLILogger to use correct time format string. Fix _edit_config() to
1289 agaffney 579 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1290     unicode support to is_realstring().
1291 agaffney 575
1292 agaffney 571 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1293 agaffney 572 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1294 agaffney 573 return value instead of non-zero. Add code to output a traceback to the
1295 agaffney 574 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1296     instead of --nocolor.
1297 agaffney 571
1298 codeman 566 10 May 2005; Preston Cody <codeman@gentoo.org>
1299     Added GLIGenDialog.py to make a generic class for the dialog functions that
1300 codeman 567 can be used by both dialogfe and the netfe/be. updated both for new filename.
1301     date changes. 2004->2005.
1302 codeman 566
1303 agaffney 564 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1304     Removed 'quiet=True' from spawn() calls
1305    
1306 codeman 563 10 May 2005; Preston Cody <codeman@gentoo.org>
1307     Updated GLIUtility with patches from chotchki. Also added documentation
1308    
1309 codeman 560 9 May 2005; Preston Cody <codeman@gentoo.org>
1310     Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1311     Updated _edit_config in ArchTemplate, make_config, and various other fixes
1312     from bug #89683, mostly touchups.
1313    
1314 agaffney 556 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1315     GLIStorageDevice cleanup patch from bug #91761
1316    
1317 agaffney 551 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1318     Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1319 agaffney 553 _edit_config(). Error logging casts 'error' to str
1320 agaffney 551
1321 agaffney 548 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1322 agaffney 549 Exceptions received in CC are logged before being passed to the FE. Added
1323     code to CC to handle exceptions *not* thrown by the installer itself.
1324 agaffney 548
1325 agaffney 544 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1326     get_max_mb_for_resize() returns -1 if not self.resizeable
1327    
1328     30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1329 agaffney 539 More dirty rsync hacks :-/
1330    
1331 codeman 532 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1332     Patches from chotchki (bug #90325) to improve CC networking. untested.
1333    
1334 agaffney 528 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1335 agaffney 529 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1336 agaffney 533 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1337 agaffney 535 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1338 agaffney 536 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1339 agaffney 538 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1340     _get_packages_to_emerge()
1341 agaffney 528
1342 codeman 526 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1343     Added group-adding code to set_users in ArchTemplate
1344    
1345 agaffney 525 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1346     Added post-install script code
1347    
1348 agaffney 524 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1349     Fixed encapsulation issues in GLIClientController (bug #90141)
1350    
1351 agaffney 523 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1352     Update resizing code in GLIStorageDevice
1353    
1354 codeman 522 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1355     Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1356    
1357 agaffney 521 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1358     Reverted change to ArchTemplate and added support for commented line in old
1359     code.
1360    
1361 agaffney 518 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1362     Changed _edit_config() to modify value in-place instead of commenting out and
1363     adding the new value to the end of the file.
1364    
1365 codeman 512 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1366     Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1367     Also updated TODO list.
1368    
1369 agaffney 509 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1370     Use blackace's one-liner to add comments for all function for use with
1371     pythondoc.
1372    
1373 agaffney 503 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1374     Moved 'end >= device_sectors' check out of loop to check for next partition's
1375 agaffney 505 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1376 agaffney 507 Partitioning code now tracks start/end of extended for placing logicals. End
1377     point of logical is now adjusted along with start.
1378 agaffney 503
1379 agaffney 497 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1380 agaffney 501 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1381 agaffney 502 the way of partitioning from a blank disk. Add int() around access to minor
1382     key in partition information due to new partition code leaving them as float.
1383 agaffney 497
1384 agaffney 494 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1385 agaffney 495 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1386 agaffney 494
1387 agaffney 492 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1388     Major GLIStorageDevice overhaul...all MB now instead of sectors.
1389    
1390     8 Apr 2005; Scott Myron <samyron@gentoo.org>
1391 samyron 491 Added support for DHCP options and MAC addresses in the InstallProfile.
1392    
1393 agaffney 481 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1394 agaffney 484 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1395     sed to properly strip out junk.
1396 agaffney 481
1397 codeman 475 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1398 codeman 476 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1399 codeman 479 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1400 codeman 475
1401 codeman 467 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1402     Fixed indent problem in GLICController
1403    
1404 agaffney 463 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1405     Check for disklabel type "loop" and use the device name without a minor.
1406    
1407 agaffney 453 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1408     Remove /tmp/compile_output.log and /var/log/install.log when install is
1409 agaffney 456 complete. Added code to (hopefully) keep 2nd thread running after install.
1410 agaffney 458 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1411 agaffney 460 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1412 agaffney 461 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1413 agaffney 453
1414 agaffney 451 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1415 agaffney 452 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1416     when unpacking tarball.
1417 agaffney 451
1418 codeman 443 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1419 codeman 446 rewrote filesystem_tools. looks like it works so ripping out all the old
1420     filesystem_tools code.
1421 codeman 443
1422 codeman 427 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1423     Changed the print statements to logging in the partitioning BE code.
1424     the logger may need to be imported to the x86archtemplate. unknown yet.
1425 codeman 432 Added the finishing_cleanup function.
1426 codeman 433 added a fix to the logger from BenUrban
1427 codeman 427
1428 codeman 422 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1429     changed InstallProfile to remove is_uri check on kernel, stage, and portage
1430     URIs. The blank uri check has been commented out.
1431 codeman 426 ripped out error checking of set_services. this is done by _add_to_runlevel.
1432 codeman 422
1433 agaffney 419 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1434     set_stage_tarball_uri() doesn't raise an exception on a blank string.
1435    
1436 agaffney 415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1437     GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1438 agaffney 416 the install profile if available. Commented out spawn() debugging prints
1439 agaffney 415
1440 codeman 409 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1441     small changes to setup_network_post. moved adding to runlevel of net.x to
1442     after the device gets symlinked. added domainname runlevel command.
1443    
1444 agaffney 401 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1445 agaffney 408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1446 agaffney 412 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1447     spawn() call in livecd-kernel code to pass environment variables.
1448 agaffney 414 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1449     the install profile if available.
1450 agaffney 402
1451     23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1452 agaffney 401 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1453     to handle installing the livecd kernel into the new system.
1454    
1455 codeman 395 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1456     should emerge hotplug and coldplug before adding them to runlevel.
1457    
1458 codeman 390 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1459 codeman 395 took chroot out of grub_install command.
1460    
1461     21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1462     Changed chroot wrapper code in spawn() to write the wrapper the python way
1463     instead of the bash way to avoid quote conflicts. Added
1464 agaffney 392 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1465 agaffney 394 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1466     as it breaks the piping.
1467 codeman 390
1468 codeman 387 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1469     Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1470    
1471 agaffney 385 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1472     Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1473 agaffney 386 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1474 agaffney 389 GLIInstallProfile.
1475 agaffney 385
1476 agaffney 379 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1477 agaffney 384 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1478     to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1479     into /mnt/gentoo in prepare_chroot()
1480 agaffney 379
1481 agaffney 375 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1482     Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1483 agaffney 377 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1484     to start/end sectors
1485 agaffney 375
1486     17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1487 agaffney 374 Add 2>&1 to cmd in spawn()
1488    
1489 agaffney 369 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1490     Modified GLIUtility.exitsuccess() to work with return value from
1491 agaffney 371 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1492     creates wrapper script for commands run inside chroot so multiple commands
1493 agaffney 373 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1494     for the generated script from spawn()
1495 agaffney 369
1496 codeman 361 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1497     Removed default values for stage tarball URI and portage tree URI from
1498     InstallProfile. These should be set by the FEs. also added services step to
1499     ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1500     Possibly fixed CC DHCP bug with -n. (thx agaffney)
1501    
1502 codeman 359 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1503     Small fix for setting the default gateway. Also added feature to dialogfe.
1504    
1505 agaffney 357 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1506     Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1507    
1508 codeman 345 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1509 codeman 346 Fixed a bunch of true -> True typos. lots of em
1510 codeman 347 only write new resolv.conf if there are dns servers listed.
1511 codeman 345
1512 agaffney 343 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1513     Commented out 'display_on_tty8=True' in start_portmap()
1514    
1515 codeman 341 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1516     added progress bar to dialogfe and fix logger bug in ArchTemplate.
1517    
1518 agaffney 337 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1519 agaffney 339 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1520     lang parameter to __init__()
1521 codeman 331
1522     10 Feb 2005; Preston Cody <codeman@gentoo.org>
1523     updates to TODO list.
1524 esammer 4
1525 agaffney 322 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1526 agaffney 324 Initial code for quickpkg GRP support. Fix loop to grab packages from
1527     'emerge -p blah'
1528 agaffney 322
1529 codeman 319 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1530 codeman 320 check for dhcp in the network stuff and emerge it if it is.
1531     added quickpkg to TODO list
1532 codeman 319
1533 codeman 318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1534     Changed the raising of 'warning' exceptions to a simple log of the error
1535     so that the installer can continue.
1536    
1537 codeman 314 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1538     Some big changes. First, changed most output to display_on_tty8.
1539     Second, added log lines to all templates. Some smaller fixes such as typos.
1540     Also did some cleanups of old commented lines.
1541    
1542 agaffney 310 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1543 agaffney 312 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1544 agaffney 313 Undo change with fix. Escaping fix in GLIStorageDevice.py
1545 agaffney 310
1546 codeman 306 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1547     more updates to TODO list. hopefully we'll soon start removing items instead
1548     of adding them.
1549    
1550 agaffney 301 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1551     Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1552    
1553 codeman 293 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1554 codeman 295 updated TODO list. (again)
1555 codeman 293
1556 codeman 286 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1557     changed output of portmap start to display_on_tty8.
1558     fixed bootloader for udev and multiple kernels
1559 codeman 288 fixed custom kernel config (again)
1560 codeman 286
1561 codeman 281 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1562     changed default value of CC._enable_ssh to True because this is smart.
1563 codeman 282 added code to allow custom kernel .config. may be unstable and break. sorry.
1564 codeman 281
1565 agaffney 278 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1566     partition() now waits until after it checks for partition flags before delete
1567     the partitions :P
1568    
1569 agaffney 271 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1570 agaffney 272 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1571 agaffney 277 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1572     blank.
1573 agaffney 271
1574 codeman 268 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1575     Various fixes related to the add_users function. Still not yet finished.
1576 codeman 269 Added things to the TODO list. Lets start using that!
1577 codeman 268
1578 agaffney 264 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1579     Added code to x86Template to format newly created partitions. Also added
1580 agaffney 265 some error checking code. GLIStorageDevice passes 'minor' with data to
1581 agaffney 266 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1582     mounting code.
1583 agaffney 264
1584 codeman 263 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1585     Took out unnecessary setting of random livecd root password. the cd already
1586     sets it randomly.
1587    
1588 agaffney 255 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1589     Took out an unneeded step from CC's run()
1590    
1591 codeman 248 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1592     Attempt at detecting and adding windows partitions to lilo.
1593    
1594 codeman 235 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1595 codeman 237 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1596     partition. fixed misc exit_status => exitstatus typo.
1597 codeman 235
1598 agaffney 230 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1599 agaffney 232 Added basic code for resizing filesystems with pyparted. Fixed code for
1600     resizing ntfs and ext2/3.
1601 agaffney 230
1602 agaffney 228 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1603     Fixed partition() in x86Template so that it scans through logicals and deletes
1604 agaffney 229 before deleting containing extended partition. Also clears partition table to
1605     be safe before third pass.
1606 agaffney 228
1607 codeman 226 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1608     Added mount_network_shares. not able to test it from this computer.
1609     will test when i get back to school.
1610     also added start_portmap to the client_controller as an always-do.
1611     agaffney says this is needed for NFS mounts to work.
1612    
1613 agaffney 225 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1614     Partial rewrite of partitioning code in x86Template. No longer shells out to
1615     parted to perform actions, now uses all pyparted calls. Code "works" in a
1616     test, but still needs lots of TLC. Also modified tests/install.py to work
1617     with x86Template and GLIClientConfiguration.
1618    
1619 agaffney 221 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1620     Initial move of partitioning code from ArchTemplate to x86Template.
1621 agaffney 220
1622 codeman 219 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1623 agaffney 224 Added grp_install and services to InstallProfile. forgot about the set_root_password
1624 codeman 222
1625     07 Jan 2005; Preston Cody <codeman@gentoo.org>
1626 codeman 219 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1627     Test Install ran very well (skipping partitioning).
1628    
1629 codeman 213 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1630 codeman 215 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1631 codeman 216 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1632     some may still have eluded me.
1633 codeman 215
1634     05 Jan 2005; Preston Cody <codeman@gentoo.org>
1635 codeman 213 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1636     Just finished mount_local_partitions in GLIArchitectureTemplate
1637    
1638 agaffney 212 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1639     Added get_num_sectors() to GLIStorageDevice.
1640    
1641     04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1642 agaffney 205 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1643 agaffney 208 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1644     from GLIInstallProfile.
1645 agaffney 205
1646 agaffney 188 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1647     GLIStorageDevice returns "unknown" instead of "" for get_type()
1648    
1649 agaffney 183 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1650 agaffney 184 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1651     actually work. Commented out resizability checking code for speed.
1652 agaffney 183
1653 agaffney 174 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1654     Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1655     GLIStorageDevice at the suggestion of plors
1656    
1657 agaffney 162 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1658     Added a function to GLIUtility to pull a value from a make.conf-style config
1659 agaffney 163 file. Minor type fix to GLIInstallProfile.py
1660 agaffney 162
1661 agaffney 160 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1662 agaffney 163 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1663     network mounts from partition data structure in GLIInstallProfile
1664 agaffney 161
1665 agaffney 147 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1666     Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1667     can be resized.
1668    
1669 codeman 91 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1670     Added some of the final functions to GLIInstallTemplate.
1671     Yes this project is still active despite rare use of the Changelog!
1672    
1673 npmccallum 58 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1674     Added the GLIPartitionTools.py file. This is a temporary insertion of
1675     partitioning tools that will eventually go into their own package.
1676    
1677 npmccallum 33 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1678     Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1679     for the program). Added __init__(install_profile, client_configuration) to
1680     GLI.InstallProfile. This sets install_profile and client_configuration once so as
1681     to avoid constantly passing stuff every time we call a method.
1682    
1683 npmccallum 28 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1684    
1685     Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1686     files without messing up all the other stuff in them. This will be used for making
1687     changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1688    
1689 npmccallum 27 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1690    
1691     Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1692     have a few basic things. I added two private methods. One is _depends(). This
1693     will be used for dependency checking (ie. unpacking a tarball requires that
1694     partitioning has been done). The other is _exec_in_chroot(). This is the exact
1695     same syntax as os.system(), however, instead of being run in the liveCD
1696     environment, it runs in the chroot. This requires a bit of fork() magic, so I
1697     isolated the code. Hope to work more this week to get this class formed...
1698    
1699 esammer 7 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1700    
1701     Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1702     obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1703     to allow for easier modification (mutable, rather than immutable objects). Updated
1704     existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1705     Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1706     Added initial unit test code.
1707    
1708 esammer 4 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1709    
1710     Added initial changelog. Setting up the basic structure of the CVS repository
1711     for the project. Added the UML class diagram in docs. Added a skeletal GLI
1712     python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20