/[gli]/trunk/ChangeLog
Gentoo

Diff of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1470 Revision 1892
1# ChangeLog for Gentoo Linux Installer 1# ChangeLog for Gentoo Linux Installer
2# Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2 2# Copyright 2005-2008 Gentoo Foundation; Distributed under the GPL v2
3# $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.657 2006/06/25 22:24:28 codeman Exp $ 3# $Id: $
4
5 06 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIArchitectureTemplate.py:
7 Add checking for non-blank local filesystems after mounting
8
9 06 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
10 src/GLIArchitectureTemplate.py:
11 Update post-install networking config to use newer conf.d/net syntax
12
13 05 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
14 src/GLIArchitectureTemplate.py:
15 run sed on copied make.conf to remove lines that start with ##
16
17 04 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/Partitioning.py:
18 Modify order of extended check in partitioning code so that it works
19
20 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
21 sync dynamic-stage3 code in GLIPortage with GLIArch
22
23 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
24 src/GLIArchitectureTemplate.py:
25 Create /dev/tty1 with dynamic stage3
26
27 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org>
28 src/GLIArchitectureTemplate.py, src/GLIPortage.py,
29 src/fe/dialog/gli-dialog.py:
30 Switch to running vdb_to_fake_binrepo.py instead of reading systempkgs.txt
31 remove all references to systempkgs.txt
32
33 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org> -src/runtimedeps.py,
34 +src/vdb_to_fake_binrepo.py:
35 Add vdb_to_fake_binrepo.py script from the always awesome zmedico
36
37 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
38 force livecd and bindist USE
39
40 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org>
41 src/GLIArchitectureTemplate.py:
42 add in metadata_overlay for faster dep calculation
43
44 26 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
45 src/fe/gtk/ExtraPackages.py:
46 comment out kernelpkgs stuff in gtkfe
47
48 25 Nov 2007; Preston Cody <codeman@gentoo.org>
49 src/fe/dialog/gli-dialog.py:
50 adding commmand-line option for advanced mode which allows full functionality.
51
52 18 Nov 2007; Preston Cody <codeman@gentoo.org>
53 src/fe/dialog/gli-dialog.py:
54 attempting to throw in kernpkgs support. will see how this goes.
55
56 18 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
57 src/fe/gtk/OtherSettings.py:
58 pre-create conf.d/xdm
59
60 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIUtility.py:
61 use proper file name for kernel packages
62
63 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
64 src/fe/gtk/Networking.py:
65 s/install_logger/install_logging_daemon/
66
67 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
68 src/fe/gtk/LocalMounts.py:
69 import GLIUtility
70
71 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/fe/gtk/gtkfe.py:
72 start with Partitioning screen
73
74 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
75 src/fe/gtk/ExtraPackages.py, src/fe/gtk/LocalMounts.py,
76 src/fe/gtk/Networking.py, src/fe/gtk/OtherSettings.py,
77 src/fe/gtk/RootPass.py, src/fe/gtk/Timezone.py, src/fe/gtk/gtkfe.py:
78 rearrange a bit of code for gtkfe networkless-only transition
79
80 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
81 src/GLIUtility:
82 add get_kernpkgs_from_cd() function
83
84 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
85 src/GLIInstallProfile.py:
86 add xdm, gdm, and kdm to package list
87
88 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
89 src/fe/dialog/gli-dialog.py:
90 modify root mountpoint check in gli-dialog to use a for/else and notify the
91 user why they're not being allowed to leave the screen
92
93 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
94 src/templates/x86ArchitectureTemplate.py:
95 move around parentheses to fix bug 179528
96
97 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
98 src/fe/gtk/InstallFailed.py:
99 correct bugzilla location for bug 178144
100
101 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
102 src/GLIArchitectureTemplate.py, src/fe/gtk/gtkfe.py:
103 fix error in debug mode for bug 178475
104 force install_type to networkless for gtkfe
105
106 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
107 src/GLIArchitectureTemplate.py:
108 set TIMEZONE in /etc/conf.d/clock for bug 158882
109
110 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
111 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
112 src/fe/gtk/InstallFailed.py, src/fe/gtk/gtkfe.py:
113 make install log location consistent throughout code
114 'View Log' button in gtkfe now looks for active and failed log
115
116 04 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org>
117 src/GLIInstallProfile.py:
118 Added x11-themes/gentoo-artwork-livecd to the list of extra packages.
119
120 04 Jan 2007; Preston Cody <codeman@gentoo.org>
121 ClientController:
122 took out the preinstall steps. these will now be handled by the frontends.
123 The actual code for the steps can be put in GLIUtility if necessary.
124 IP:
125 Took out partitioning. Added mounts.
126 Moved root mount point over from CF
127 Removed RP-PPPoE. was never used.
128 AT:
129 reordered functions. removed references to the client-config
130 fixed fstab and other locations that used mountpoints to use the new mounts.
131 removed unused rc.conf function.
132 other smaller touchups.
133 gli-dialog:
134 install_profile() to self._install_profile
135 fix reference to arch instaed of self._arch
136 x86AT:
137 fixed code to use mounts instead of partitioning.
138
139 01 Jan 2007; Preston Cody <codeman@gentoo.org>
140 fixing all instances of WINDOWSKEYS to WINDOWKEYS
141 added space in AT debug line.
142 more general updates in an effort to get the code functional
143
144 29 Oct 2006; Preston Cody <codeman@gentoo.org>
145 gli-dialog:
146 more rearranging of code. Tossed the review menu and not calling show_settings
147 not sure how those are going to turn out just yet.
148
149 22 Oct 2006; Andrew Gaffney <agaffney@gentoo.org>
150 src/Partitioning.py:
151 first round of refactoring for Partitioning.py (was GLISD)
152
153 22 Oct 2006; Preston Cody <codeman@gentoo.org>
154 gli-dialog:
155 added in the rest of the code from GLIGenDialog.
156 will start picking at it now.
157 moved the early questions such as advanced_mode/networkless
158 into functions in the GLIDialog class.
159
160 21 Oct 2006; Preston Cody <codeman@gentoo.org>
161 ClientController and gli-dialog and GLIGenDialog:
162 removing GenDialog, this code will be put into gli-dialog
163 moving some ClientController code into gli-dialog as well.
164 this is only the beginning :)
165
166#------------------------------------------
167# GLI SWITCHES TO SVN.
168
169 15 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIArchitectureTemplate.py:
171 use _wait_for_device_node() any place we were looping and checking before
172
173 13 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/GLIArchitectureTemplate.py:
175 add _wait_for_device_node()
176 src/GLIPortage.py:
177 raise an exception in get_deps() if pkglist is empty
178 -k option to install livecd-kernel to shut up wolf31o2 :P
179
180 11 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
181 src/GLIArchitectureTemplate.py:
182 break after installing 1 mta in install_mta()
183
184 10 Sep 2006; Preston Cody <codeman@gentoo.org>
185 src/GLIGenDialog.py:
186 rewrote how the USE flags work so that they are written correctly in relation
187 to the system's USE flags.
188 added a while condition on setting a user password
189 src/GLIArchitectureTemplate.py:
190 adding a self._mounted_devices to keep track of mounted partitions.
191 When cleaning up, only unmount these partitions. Not yet tested.
192
193 10 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
194 src/GLIStorageDevice.py:
195 properly identify apple_bootstrap partitions
196
197 9 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
198 src/GLIStorageDevice.py:
199 pay attention to 'ignoredparts' when reading partition table
200
201 3 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
202 src/GLIArchitectureTemplate.py:
203 force conversion of 'mb' to long
204
205 2 Sep 2006; Preston Cody <codeman@gentoo.org>
206 Lots of internationalization fixes. Point to a translation path called
207 languages in the dialog directory. Generated and added .pot files.
208 Added gettext to GLIIP for package descriptions.
209
210 01 Sep 2006; Chris Gianelloni <wolf31o2@gentoo.org>
211 src/GLIInstallProfile.py:
212 Added some more applications to the Extra Packages list.
213
214 1 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
215 src/templates/ppcArchitectureTemplate.py:
216 this doesn't need to inherit from x86AT or create an infinite loop by calling
217 its own __init__()
218 src/GLIArchitectureTemplate.py,src/templates/x86ArchitectureTemplate.py:
219 move partitioning code to GLIAT
220
221 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
222 src/GLIArchitectureTemplate.py:
223 pass quotes_around_value=False when adding default route to conf.d/net
224
225 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
226 src/GLIArchitectureTemplate.py:
227 copy backup custom.conf from livecd if present
228
229*GLI-0.4 (31 Jul 2006)
230
231 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
232 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
233 doing the testing and coming up with the patch.
234
235 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
236 src/GLIArchitectureTemplate.py:
237 skip blank entries/files in update_config_files()
238
239 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
240 src/templates/x86ArchitectureTemplate.py:
241 move logical clipping logic a bit
242
243 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
244 I've commented out most of the code that used launch. It wasn't working and
245 we don't have the time to fix it before the release. I'll look into it after
246 the release and make it more robust and flexible.
247
248 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
249 src/templates/x86ArchitectureTemplate.py:
250 clip logical partition at end of extended
251
252 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
253 src/GLIInstallProfile.py:
254 Added a few more applications to the list of extra packages to be merged,
255 all from various GRP sets.
256
257 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
258 Added launch variable to the end of each try-run with auth, which should
259 cause this to function properly. Of course, more testing is needed.
260
261 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
262 Fix a missed space in the installer script.
263
264 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
265 src/GLIClientConfiguration.py:
266 adding 'None' with capital N so that the frontends can parse the network type
267
268 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
269 src/GLIClientController.py:
270 log version-stamp
271
272 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
273 Updated the installer script to allow specifying the front-end to run from
274 the command line. Currently, it only supports dialog and gtk. It still needs
275 some testing, however.
276
277 9 July 2006; Preston Cody <codeman@gentoo.org>
278 src/GLIGenDialog.py:
279 make lilo only show up for x86 if non-networkless
4 280
5 25 Jun 2006; Preston Cody <codeman@gentoo.org> 281 25 Jun 2006; Preston Cody <codeman@gentoo.org>
6 src/GLIGenDialog.py 282 src/GLIGenDialog.py:
7 adding code to auto-add doscsi if a scsi drive detected. 283 adding code to auto-add doscsi if a scsi drive detected.
8 this code is also in the gtkfe already 284 this code is also in the gtkfe already
9 285
10 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org> 286 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
11 src/GLIPortage.py: 287 src/GLIPortage.py:
13 289
14 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org> 290 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
15 src/GLIUtility.py: 291 src/GLIUtility.py:
16 fix list_mirrors() to ignore <uri> lines that don't end on the same line 292 fix list_mirrors() to ignore <uri> lines that don't end on the same line
17 293
18 17 Jun 2006; Preston Cody <codeman@gentoo.org> 294 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
19 Added code to the mta step in AT to parse the install packages list and 295 Added code to the mta step in AT to parse the install packages list and
20 look for mtas and if it finds it emerge it. 296 look for mtas and if it finds it emerge it.
21 Initial attempt at moving extra_packages early in the setup to only show 297 Initial attempt at moving extra_packages early in the setup to only show
22 local USE flags relating to those packages. 298 local USE flags relating to those packages.
23 .. abandoned local USE project. no right way to do it. 299 .. abandoned local USE project. no right way to do it.
46 call reorder_minors() from tidy_partitions() instead of 322 call reorder_minors() from tidy_partitions() instead of
47 set_partitions_from_disk() 323 set_partitions_from_disk()
48 add code to reorder_minors() to take extended/logical into consideration with 324 add code to reorder_minors() to take extended/logical into consideration with
49 non-free partitions 325 non-free partitions
50 326
51 30 Apr 2006; Preston Cody <codeman@gentoo.org> 327 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
52 added a check of the length of the directory in /usr/src if under 6 characters 328 added a check of the length of the directory in /usr/src if under 6 characters
53 should fix bug 131809 329 should fix bug 131809
54 330
55 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 331 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
56 src/GLIArchitectureTemplate.py: 332 src/GLIArchitectureTemplate.py:
63 339
64 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 340 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
65 src/GLIInstallProfile.py: 341 src/GLIInstallProfile.py:
66 change kernel-modules to not be so stupid 342 change kernel-modules to not be so stupid
67 343
68 9 Apr 2006; Preston Cody <codeman@gentoo.org> 344 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
69 GLIMD: fix display problem with execute.pyhtml. 345 GLIMD: fix display problem with execute.pyhtml.
70 make tables better. 346 make tables better.
71 347
72 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 348 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
73 src/GLIInstallProfile.py: 349 src/GLIInstallProfile.py:
75 src/templates/x86ArchitectureTemplate.py: 351 src/templates/x86ArchitectureTemplate.py:
76 save/restore partition name 352 save/restore partition name
77 src/GLIStorageDevice.py: 353 src/GLIStorageDevice.py:
78 support for partition name 354 support for partition name
79 355
80 8 Apr 2006; Preston Cody <codeman@gentoo.org> 356 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
81 touchups to add_profile in GLIMD to link to webgli 357 touchups to add_profile in GLIMD to link to webgli
82 add a save to GLIMD profile button in webgli's saveprofile 358 add a save to GLIMD profile button in webgli's saveprofile
83 gliserv.py: 359 gliserv.py:
84 initial attempt at custom networking info per client. hostname support only. 360 initial attempt at custom networking info per client. hostname support only.
85 361
86 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 362 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
87 src/net/server/html/webgli/partitioning[234].pyhtml: 363 src/net/server/html/webgli/partitioning[234].pyhtml:
88 small fixes for new partioning code 364 small fixes for new partioning code
89 365
90 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 366 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
91 src/GLIClientController.py: 367 src/GLIClientController.py:
156 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org> 432 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
157 src/GLIStorageDevice.py: 433 src/GLIStorageDevice.py:
158 raise an exception if the existing partitions are out of disk order 434 raise an exception if the existing partitions are out of disk order
159 look for minors out of order instead of disk position 435 look for minors out of order instead of disk position
160 436
161 8 Mar 2006; Preston Cody <codeman@gentoo.org> 437 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
162 src/fe/dialog/gli-dialog and src/GLIGenDialog: 438 src/fe/dialog/gli-dialog and src/GLIGenDialog:
163 added networkless mode to gli-dialog. 439 added networkless mode to gli-dialog.
164 440
165 6 Mar 2006; Preston Cody <codeman@gentoo.org> 441 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
166 src/templates/x86AT: 442 src/templates/x86AT:
167 add windows detection code for grub. untested. 443 add windows detection code for grub. untested.
168 444
169 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org> 445 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/templates/x86ArchitectureTemplate.py: 446 src/templates/x86ArchitectureTemplate.py:
175 return start/end with ip structure 451 return start/end with ip structure
176 pad min ntfs size by 50 MB just to be safe 452 pad min ntfs size by 50 MB just to be safe
177 src/GLIArchitectureTemplate.py: 453 src/GLIArchitectureTemplate.py:
178 only install filesystem tools for partitions with a mountpoint 454 only install filesystem tools for partitions with a mountpoint
179 455
180 5 Mar 2006; Preston Cody <codeman@gentoo.org> 456 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
181 add error catching and text to saving profile dialogs 457 add error catching and text to saving profile dialogs
182 458
183 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org> 459 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIPortage.py: 460 src/GLIPortage.py:
185 create /tmp, /var/tmp, and /var/lib/portage with proper permissions 461 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
204 check to make sure start sector for primary isn't less than end sector for 480 check to make sure start sector for primary isn't less than end sector for
205 previous extended 481 previous extended
206 src/GLIClientController.py: 482 src/GLIClientController.py:
207 write dns servers to /etc/resolv.conf 483 write dns servers to /etc/resolv.conf
208 484
209 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 485 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
210 src/GLIPortage.py: 486 src/GLIPortage.py:
211 copy_pkg_to_chroot() uses compile_output.log for command output 487 copy_pkg_to_chroot() uses compile_output.log for command output
212 488
213 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 489 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
214 only keep a 1000 line 'scrollback' buffer for the compile output and log file 490 only keep a 1000 line 'scrollback' buffer for the compile output and log file
215 491
216 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 492 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
217 src/GLIPortage.py: 493 src/GLIPortage.py:
218 add code make GLIPortage.py capable of being run stand-along for dynamic 494 add code make GLIPortage.py capable of being run stand-along for dynamic
219 stage3 generation and copying packages in a GRP-ish way 495 stage3 generation and copying packages in a GRP-ish way
220 grp code fixups 496 grp code fixups
221 497
222 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 498 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
223 src/GLIPortage.py: 499 src/GLIPortage.py:
224 ignore blank packages passed to get_deps() and emerge() 500 ignore blank packages passed to get_deps() and emerge()
225 501
226 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 502 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
227 src/GLIUtility.py: 503 src/GLIUtility.py:
228 add get_chosts() function 504 add get_chosts() function
229 505
230*GLI-0.3 (12 Feb 2006) 506*GLI-0.3 (12 Feb 2006)
231 507
232 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 508 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
233 src/templates/x86ArchitectureTemplate.py: 509 src/templates/x86ArchitectureTemplate.py:
234 pull old start/end sector values from somewhere that actually has them 510 pull old start/end sector values from somewhere that actually has them
235 add logic for extended partition to code that makes sure new end sector 511 add logic for extended partition to code that makes sure new end sector
236 doesn't overlap start sector of next partitions 512 doesn't overlap start sector of next partitions
237 don't freak out if partition can't be deleted 513 don't freak out if partition can't be deleted
238 514
239 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 515 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
240 src/GLIPortage.py: 516 src/GLIPortage.py:
241 run env-update at the end of copy_pkg_to_chroot() 517 run env-update at the end of copy_pkg_to_chroot()
242 518
243 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 519 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
244 src/templates/x86ArchitectureTemplate.py: 520 src/templates/x86ArchitectureTemplate.py:
245 I'm a complete fscking dumbass. I recorded the end sector for partitions that 521 I'm a complete fscking dumbass. I recorded the end sector for partitions that
246 weren't being touched, but I never used it when recreating them...the end was 522 weren't being touched, but I never used it when recreating them...the end was
247 calculated from the size in MB instead :/ 523 calculated from the size in MB instead :/
248 524
249 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 525 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
250 src/GLIArchitectureTemplate.py: 526 src/GLIArchitectureTemplate.py:
251 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd 527 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
252 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo' 528 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
253 src/GLIPortage.py: 529 src/GLIPortage.py:
254 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a' 530 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
255 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py: 531 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
256 'resized' flag 532 'resized' flag
257 533
258 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 534 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
259 src/GLIPortage.py: 535 src/GLIPortage.py:
260 short circuit and check vdb directly if package begins with '=' 536 short circuit and check vdb directly if package begins with '='
261 537
262 8 Feb 2006; Preston Cody <codeman@gentoo.org> 538 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
263 added more packages to extra_packages list in IP 539 added more packages to extra_packages list in IP
264 540
265 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 541 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
266 src/templates/x86ArchitectureTemplate.py: 542 src/templates/x86ArchitectureTemplate.py:
267 10 tries to create filesystem instead of 3 543 10 tries to create filesystem instead of 3
268 src/GLIPortage, src/GLIArchitectureTemplate.py: 544 src/GLIPortage, src/GLIArchitectureTemplate.py:
269 ignore_missing flag for copy_pkg_to_chroot() 545 ignore_missing flag for copy_pkg_to_chroot()
270 546
271 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 547 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
272 src/GLIPortage.py: 548 src/GLIPortage.py:
273 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs 549 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
274 550
275 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 551 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
276 src/net/server/gliserv.py: 552 src/net/server/gliserv.py:
277 fix handling of 404 for real files 553 fix handling of 404 for real files
278 src/net/server/GLIServerProfile.py: 554 src/net/server/GLIServerProfile.py:
279 look for 'hostname' in attributes instead of 'name' 555 look for 'hostname' in attributes instead of 'name'
280 556
281 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 557 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
282 src/SimpleXMLParser.py: 558 src/SimpleXMLParser.py:
283 initial support for 'include' in XML files 559 initial support for 'include' in XML files
284 src/GLIStorageDevice.py: 560 src/GLIStorageDevice.py:
285 initial support for % 561 initial support for %
286 src/GLIClientController.py: 562 src/GLIClientController.py:
287 add debugging statements to pre-install steps 563 add debugging statements to pre-install steps
288 564
289 15 Jan 2006; Preston Cody <codeman@gentoo.org> 565 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
290 webgli/configfiles: 566 webgli/configfiles:
291 check for key in etc_files['rc.conf'] to fix key error 567 check for key in etc_files['rc.conf'] to fix key error
292 webgli/timezone: small fix. 568 webgli/timezone: small fix.
293 webgli/extrapackages: list-type fix 569 webgli/extrapackages: list-type fix
294 webgli/services: same 570 webgli/services: same
295 glimd: add/edit_client updates. 571 glimd: add/edit_client updates.
296 572
297 12 Jan 2006; Preston Cody <codeman@gentoo.org> 573 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
298 added configure.pyhtml to glimd. minor changes 574 added configure.pyhtml to glimd. minor changes
299 to top and add_client. fixed up showargs. 575 to top and add_client. fixed up showargs.
300 added execute.pyhtml 576 added execute.pyhtml
301 changed register clients line in gliserv for name->hostname. 577 changed register clients line in gliserv for name->hostname.
302 updated TODO. 578 updated TODO.
303 579
304 10 Jan 2006; Preston Cody <codeman@gentoo.org> 580 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
305 src/net/server/*: 581 src/net/server/*:
306 added add/del/edit client/profile.pythml for glimd. 582 added add/del/edit client/profile.pythml for glimd.
307 updated templates, showclients, and gliserv. 583 updated templates, showclients, and gliserv.
308 584
309 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 585 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
310 src/net/server/*: 586 src/net/server/*:
311 stupid threading module... 587 stupid threading module...
312 588
313 8 Jan 2006; Preston Cody <codeman@gentoo.org> 589 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
314 AT: rc.conf -> conf.d/clock 590 AT: rc.conf -> conf.d/clock
315 591
316 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 592 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
317 src/GLIPortage.py: 593 src/GLIPortage.py:
318 show 'Calculating dependencies for ...' in subprogress bar at beginning of 594 show 'Calculating dependencies for ...' in subprogress bar at beginning of
319 emerge() 595 emerge()
320 src/GLIArchitectureTemplate.py: 596 src/GLIArchitectureTemplate.py:
321 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists 597 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
328 use lower-level os.read() instead of file.read() because python sucks 604 use lower-level os.read() instead of file.read() because python sucks
329 src/templates/x86ArchitectureTemplate.py: 605 src/templates/x86ArchitectureTemplate.py:
330 basic subprogress reporting for partitioning 606 basic subprogress reporting for partitioning
331 total_steps was 1 too high 607 total_steps was 1 too high
332 608
333 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 609 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
334 src/GLIUtility.py: 610 src/GLIUtility.py:
335 move parse_vdb_contents() to GLIPortage 611 move parse_vdb_contents() to GLIPortage
336 src/GLIPortage.py: 612 src/GLIPortage.py:
337 remove all symlink fixups 613 remove all symlink fixups
338 ignore 'dir' entries in CONTENTS 614 ignore 'dir' entries in CONTENTS
339 call tar with -p 615 call tar with -p
340 616
341 5 Jan 2006; Preston Cody <codeman@gentoo.org> 617 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
342 AT: bootsplash is now gensplash 618 AT: bootsplash is now gensplash
343 gliserv: add advanced_mode to shared_info 619 gliserv: add advanced_mode to shared_info
344 webgli: Added advanced mode. mostly just disables a few screens. 620 webgli: Added advanced mode. mostly just disables a few screens.
345 621
346 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 622 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
347 src/GLIPortage.py: 623 src/GLIPortage.py:
348 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb 624 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
349 added emerge() 625 added emerge()
350 update sub-progress after each package is emerged 626 update sub-progress after each package is emerged
351 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS 627 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
355 install_packages() now calls emerge() in GLIPortage 631 install_packages() now calls emerge() in GLIPortage
356 change all calls to self._emerge() to self._portage.emerge() 632 change all calls to self._emerge() to self._portage.emerge()
357 comment out all emerge status checking...using exceptions now 633 comment out all emerge status checking...using exceptions now
358 call copy_pkg_to_chroot() directly for livecd-kernel 634 call copy_pkg_to_chroot() directly for livecd-kernel
359 635
360 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 636 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
361 src/GLIArchitectureTemplate.py: 637 src/GLIArchitectureTemplate.py:
362 remove add_pkg_to_world() and copy_pkg_to_chroot() 638 remove add_pkg_to_world() and copy_pkg_to_chroot()
363 copy installer.log to installer.log.failed on install failure 639 copy installer.log to installer.log.failed on install failure
364 src/GLIUtility.py: 640 src/GLIUtility.py:
365 added get_keymaps() 641 added get_keymaps()
367 src/GLIPortage.py: 643 src/GLIPortage.py:
368 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False 644 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
369 change copy_pkg_to_chroot() to work properly with use_root=False 645 change copy_pkg_to_chroot() to work properly with use_root=False
370 figure PORTAGE_TMPDIR properly 646 figure PORTAGE_TMPDIR properly
371 647
372 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 648 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
373 src/net/server/html/*: 649 src/net/server/html/*:
374 converted showclients, load/saveprofile 650 converted showclients, load/saveprofile
375 651
376 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 652 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
377 src/GLIPortage.py: 653 src/GLIPortage.py:
378 exclude packages already in chroot vdb from binary deplist 654 exclude packages already in chroot vdb from binary deplist
379 chroot to use best_version for chroot's vdb 655 chroot to use best_version for chroot's vdb
380 src/runtimedeps.py: 656 src/runtimedeps.py:
381 accept ROOT via commandline instead of env 657 accept ROOT via commandline instead of env
382 658
383 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 659 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
384 src/runtimedeps.py: 660 src/runtimedeps.py:
385 remove passing of ROOT 661 remove passing of ROOT
386 src/GLIPortage.py: 662 src/GLIPortage.py:
387 modify get_deps() to get deptree for each package and merge into final list 663 modify get_deps() to get deptree for each package and merge into final list
388 remove depgraph class 664 remove depgraph class
389 add debugging code to get_deps() 665 add debugging code to get_deps()
390 src/GLIArchitectureTemplate.py: 666 src/GLIArchitectureTemplate.py:
391 combine code for GRP/compile in install_packages() into one block 667 combine code for GRP/compile in install_packages() into one block
392 debugging code in install_packages() 668 debugging code in install_packages()
393 669
394 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 670 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
395 src/runtimedeps.py: 671 src/runtimedeps.py:
396 initial commit 672 initial commit
397 src/GLIPortage.py: 673 src/GLIPortage.py:
398 use separate script for GRP deps 674 use separate script for GRP deps
399 remove calls to portage module 675 remove calls to portage module
400 676
401 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 677 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
402 src/GLIPortage.py: 678 src/GLIPortage.py:
403 initial commit 679 initial commit
404 move some of portage function from GLIAT 680 move some of portage function from GLIAT
405 flipped around a few function args 681 flipped around a few function args
406 src/GLIArchitectureTemplate.py: 682 src/GLIArchitectureTemplate.py:
407 revamp install_packages() for new GLIPortage 683 revamp install_packages() for new GLIPortage
408 684
409 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 685 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
410 src/GLIArchitectureTemplate.py: 686 src/GLIArchitectureTemplate.py:
411 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists 687 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
412 688
413 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 689 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
414 src/net/server/gliserv.py: 690 src/net/server/gliserv.py:
415 wrap generated code in a class to isolate it a bit better 691 wrap generated code in a class to isolate it a bit better
416 302 redirects work 692 302 redirects work
417 don't use cgi.escape() for <% %> 693 don't use cgi.escape() for <% %>
418 src/net/server/html/webgli/*: 694 src/net/server/html/webgli/*:
419 load/save profile 695 load/save profile
420 src/GLIUtility.py: 696 src/GLIUtility.py:
421 change /sbin/lspci to just lspci 697 change /sbin/lspci to just lspci
422 698
423 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 699 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
424 src/GLIClientController.py: 700 src/GLIClientController.py:
425 change ordering of statements in CC run() while loop to not go past the end 701 change ordering of statements in CC run() while loop to not go past the end
426 of the array 702 of the array
427 src/GLIArchitectureTemplate.py: 703 src/GLIArchitectureTemplate.py:
428 removed redundant bind mounts 704 removed redundant bind mounts
429 705
430 18 Dec 2005; Preston Cody <codeman@gentoo.org> 706 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
431 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py 707 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
432 added a diagram by blackace from last night. 708 added a diagram by blackace from last night.
433 added the glossary in RTF format. 709 added the glossary in RTF format.
434 710
435 17 Dec 2005; Preston Cody <codeman@gentoo.org> 711 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
436 x86AT: separated out emerge/configure from running of bootloader 712 x86AT: separated out emerge/configure from running of bootloader
437 added MBR drive support to lilo. 713 added MBR drive support to lilo.
438 these changes will likely not work. 714 these changes will likely not work.
439 AT: added setup_and_run_bootloader step. 715 AT: added setup_and_run_bootloader step.
440 716
441 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 717 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
442 src/net/server/gliserv.py: 718 src/net/server/gliserv.py:
443 call generated code in a function 719 call generated code in a function
444 src/net/server/html/webgli/*: 720 src/net/server/html/webgli/*:
445 include top/bottom 721 include top/bottom
446 src/GLIArchitectureTemplate.py, src/GLIClientController.py, 722 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
447 src/GLIClientCongifuration.py: 723 src/GLIClientCongifuration.py:
448 install mode magic 724 install mode magic
449 725
450 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 726 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
451 src/GLIClientController.py: 727 src/GLIClientController.py:
452 use GLIException when there's an import problem 728 use GLIException when there's an import problem
453 added debug code to show install_steps 729 added debug code to show install_steps
454 src/templates/amd64ArchitectureTemplate.py: 730 src/templates/amd64ArchitectureTemplate.py:
455 add . to import path 731 add . to import path
456 proper path this time: ../../templates 732 proper path this time: ../../templates
457 src/GLIArchitectureTemplate.py: 733 src/GLIArchitectureTemplate.py:
458 add _portage_best_version() function 734 add _portage_best_version() function
459 735
460 11 Dec 2005; Preston Cody <codeman@gentoo.org> 736 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
461 added initial glossary and gimli diagram to the docs directory. 737 added initial glossary and gimli diagram to the docs directory.
462 modify gli-dialog to allow editing of the install_profile after loading XML. 738 modify gli-dialog to allow editing of the install_profile after loading XML.
463 739
464 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 740 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
465 src/net/server/html/webgli/: 741 src/net/server/html/webgli/:
466 converted globaluse, localuse, networkmounts, portagetree, and stageselection 742 converted globaluse, localuse, networkmounts, portagetree, and stageselection
467 moved saveclientconfig stuff into clientconfig 743 moved saveclientconfig stuff into clientconfig
468 moved saveconfigfiles into config files 744 moved saveconfigfiles into config files
469 converted etc_portage and makedotconf 745 converted etc_portage and makedotconf
474 HTML escape <% %> stuff 750 HTML escape <% %> stuff
475 work around python's sucky regexes 751 work around python's sucky regexes
476 src/GLIInstallProfile.py: 752 src/GLIInstallProfile.py:
477 allow set_{rsync,ftp,http}_proxy() to accept empty values 753 allow set_{rsync,ftp,http}_proxy() to accept empty values
478 754
479 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 755 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
480 src/net/server/gliserv.py: 756 src/net/server/gliserv.py:
481 initial commit of Legolas templating engine 757 initial commit of Legolas templating engine
482 302 redirects 758 302 redirects
483 src/net/server/html/index.html, src/net/server/webgli_template.html: 759 src/net/server/html/index.html, src/net/server/webgli_template.html:
484 minor changes for new code 760 minor changes for new code
485 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml: 761 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
486 initial commit of the conversion from the monolithic WebGLIHandler.py to the 762 initial commit of the conversion from the monolithic WebGLIHandler.py to the
487 one file per path Legolas goodness 763 one file per path Legolas goodness
488 partitioning[2-4] done 764 partitioning[2-4] done
489 765
490 5 Dec 2005; Preston Cody <codeman@gentoo.org> 766 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
491 webgli: dhcp options in CC and post-install. 767 webgli: dhcp options in CC and post-install.
492 updated comparison chart. 768 updated comparison chart.
493 webgli: etc/portage/* and distcc support added. not too-well tested. 769 webgli: etc/portage/* and distcc support added. not too-well tested.
494 770
495 4 Dec 2005; Preston Cody <codeman@gentoo.org> 771 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
496 webgli_template.html: valign=top on left side. 772 webgli_template.html: valign=top on left side.
497 webgli: fix bootloader boot_device. now working. 773 webgli: fix bootloader boot_device. now working.
498 webgli: CC proxy done. post-install proxy in progress. 774 webgli: CC proxy done. post-install proxy in progress.
499 775
500 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 776 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
501 src/net/server/webgli_template.html: 777 src/net/server/webgli_template.html:
502 increase padding for content cell to 7px and add colspan=2 778 increase padding for content cell to 7px and add colspan=2
503 779
504 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> 780 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
505 webgli: added graphic bar on top 781 webgli: added graphic bar on top
506 webgli: added hover effects on the links on the left 782 webgli: added hover effects on the links on the left
507 webgli: re-rendered header_bg.png to stretch without artifacts 783 webgli: re-rendered header_bg.png to stretch without artifacts
508 784
509 3 Dec 2005; Preston Cody <codeman@gentoo.org> 785 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
510 webgli: make.conf disabling fixes for dynamic_stage3 786 webgli: make.conf disabling fixes for dynamic_stage3
511 fixed portage snapshot browse popup 787 fixed portage snapshot browse popup
512 all changes tested. 788 all changes tested.
513 webgli: add debug mode to CC screen. the screen still needs lots of work. 789 webgli: add debug mode to CC screen. the screen still needs lots of work.
514 790
515 1 Dec 2005; Preston Cody <codeman@gentoo.org> 791 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
516 added debug mode question to gli-dialog 792 added debug mode question to gli-dialog
517 added CC proxies to CC networking for gli-dialog 793 added CC proxies to CC networking for gli-dialog
518 webgli: fixed skip CC networking if connection active 794 webgli: fixed skip CC networking if connection active
519 webgli: portage snapshot defaults to CD 795 webgli: portage snapshot defaults to CD
520 webgli: bootloader mbr drive selection 796 webgli: bootloader mbr drive selection
521 webgli: USE flags unselectable if dynamic_stage3 797 webgli: USE flags unselectable if dynamic_stage3
522 webgli: manual extra packages and save button. 798 webgli: manual extra packages and save button.
523 799
524 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 800 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
525 src/GLIUtility.py: 801 src/GLIUtility.py:
526 change ping count to 2 802 change ping count to 2
527 docs/comparison.html 803 docs/comparison.html
528 initial commit 804 initial commit
529 805
530 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 806 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
531 src/templates/x86ArchitectureTemplate.py: 807 src/templates/x86ArchitectureTemplate.py:
532 fix map() issue with grub code 808 fix map() issue with grub code
533 replace kernel_names and initrd_names loops with one-liners 809 replace kernel_names and initrd_names loops with one-liners
534 810
535 27 Nov 2005; Preston Cody <codeman@gentoo.org> 811 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
536 gli-dialog won't let you dynamic stage3 without systempkgs.txt. 812 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
537 initial gli-dialog support for recommended partitioning layout and clear. 813 initial gli-dialog support for recommended partitioning layout and clear.
538 failure cleanup now an option for gli-dialog. 814 failure cleanup now an option for gli-dialog.
539 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf 815 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
540 added comparison list and updated TODO! 816 added comparison list and updated TODO!
541 817
542 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 818 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
543 src/GLIArchitectureTemplate.py: 819 src/GLIArchitectureTemplate.py:
544 fix to stage1() debug code 820 fix to stage1() debug code
545 fix to stage2() debug code 821 fix to stage2() debug code
546 822
547 26 Nov 2005; Preston Cody <codeman@gentoo.org> 823 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
548 some more bootloader code fixes. forgot boot_device != mbr_device. 824 some more bootloader code fixes. forgot boot_device != mbr_device.
549 825
550 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 826 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
551 src/GLIStorageDevice.py: 827 src/GLIStorageDevice.py:
552 fix to unallocated space merging when last one is after part 4 828 fix to unallocated space merging when last one is after part 4
553 829
554 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 830 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
555 src/GLIArchitectureTemplate.py: 831 src/GLIArchitectureTemplate.py:
556 small fix to debugging code in copy_pkg_to_chroot() 832 small fix to debugging code in copy_pkg_to_chroot()
557 833
558 23 Nov 2005; Preston Cody <codeman@gentoo.org> 834 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
559 more bugfixes with bootloader code 835 more bugfixes with bootloader code
560 gli-dialog side appears to work 836 gli-dialog side appears to work
561 837
562 21 Nov 2005; Preston Cody <codeman@gentoo.org> 838 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
563 initial adding of boot_device to backend. 839 initial adding of boot_device to backend.
564 initial boot_device support added to gli-dialog. 840 initial boot_device support added to gli-dialog.
565 some fixes of my poor coding 841 some fixes of my poor coding
566 842
567 20 Nov 2005; Preston Cody <codeman@gentoo.org> 843 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
568 converted gli-dialog to use the install_package_list. 844 converted gli-dialog to use the install_package_list.
569 gtkfe has already been converted by AllanonJL 845 gtkfe has already been converted by AllanonJL
570 new way working in gli-dialog now and added to webgli. 846 new way working in gli-dialog now and added to webgli.
571 added set/get_boot_device() to IP 847 added set/get_boot_device() to IP
572 848
573 19 Nov 2005; Preston Cody <codeman@gentoo.org> 849 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
574 get_install_package_list added to InstallProfile. This can be used by the FEs 850 get_install_package_list added to InstallProfile. This can be used by the FEs
575 851
576 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 852 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
577 src/templates/x86ArchitectureTemplate.py: 853 src/templates/x86ArchitectureTemplate.py:
578 call ls with '-1 --color=no' 854 call ls with '-1 --color=no'
579 855
580 16 Nov 2005; Preston Cody <codeman@gentoo.org> 856 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
581 added warning (#9) to GRP ppl about stage3 tarballs 857 added warning (#9) to GRP ppl about stage3 tarballs
582 858
583 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 859 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
584 src/GLIArchitectureTemplate.py: 860 src/GLIArchitectureTemplate.py:
585 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get 861 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
586 confused 862 confused
587 863
588 13 Nov 2005; Preston Cody <codeman@gentoo.org> 864 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
589 removed protocols from rc.conf screens 865 removed protocols from rc.conf screens
590 finished initial rc.conf and make.conf in webgli 866 finished initial rc.conf and make.conf in webgli
591 867
592 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 868 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
593 src/net/server/gliserv.py: 869 src/net/server/gliserv.py:
594 add -h option to usage() 870 add -h option to usage()
595 show time and request URI in debug mode 871 show time and request URI in debug mode
596 show client IP in debug mode 872 show client IP in debug mode
597 just use IP instead of trying to do a reverse lookup 873 just use IP instead of trying to do a reverse lookup
598 874
599 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 875 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
600 src/net/server/gliserv.py: 876 src/net/server/gliserv.py:
601 'classier' 401 message 877 'classier' 401 message
602 proper commandline parsing 878 proper commandline parsing
603 help via -h 879 help via -h
604 user/pass can be specificed via commandline option 880 user/pass can be specificed via commandline option
605 881
606 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 882 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
607 src/net/server/gliserv.py: 883 src/net/server/gliserv.py:
608 basic HTTP auth 884 basic HTTP auth
609 885
610 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 886 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
611 src/net/server/gliserv.py: 887 src/net/server/gliserv.py:
612 dynamic module reloading (yipee!) 888 dynamic module reloading (yipee!)
613 send 'Last-Modified' header for real files 889 send 'Last-Modified' header for real files
614 respond to HEAD with just headers 890 respond to HEAD with just headers
615 src/net/server/handlers/WebGLIHandler.py: 891 src/net/server/handlers/WebGLIHandler.py:
616 icons for drives 892 icons for drives
617 893
618 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 894 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
619 src/net/server/handlers/WebGLIHandler.py: 895 src/net/server/handlers/WebGLIHandler.py:
620 initial 'pretty' partition table display support 896 initial 'pretty' partition table display support
621 clicking partition in 'pretty' display works instead of radio buttons 897 clicking partition in 'pretty' display works instead of radio buttons
622 radio buttons and pretty display work together 898 radio buttons and pretty display work together
623 META redirect instead of javascript 899 META redirect instead of javascript
629 whoops...that shouldn't have been commented out 905 whoops...that shouldn't have been commented out
630 create image_dir with -p in copy_pkg_to_chroot() 906 create image_dir with -p in copy_pkg_to_chroot()
631 more generic of symlink crappiness 907 more generic of symlink crappiness
632 new copy_pkg_to_chroot() actually works now 908 new copy_pkg_to_chroot() actually works now
633 909
634 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 910 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
635 src/GLIStorageDevice.py: 911 src/GLIStorageDevice.py:
636 initial generic disk support 912 initial generic disk support
637 fixes for add_partition() code 913 fixes for add_partition() code
638 src/net/server/handlers/WebGLIHandler.py: 914 src/net/server/handlers/WebGLIHandler.py:
639 added support for creating generic disks 915 added support for creating generic disks
640 add new partition working 916 add new partition working
641 save and delete partitions 917 save and delete partitions
642 918
643 6 Nov 2005; Preston Cody <codeman@gentoo.org> 919 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
644 webgli: Partitioning making progress. 920 webgli: Partitioning making progress.
645 921
646 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 922 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
647 src/GLIArchitectureTemplate.py: 923 src/GLIArchitectureTemplate.py:
648 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to 924 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
649 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image 925 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
650 dir) and works around /etc/gconf symlink problem 926 dir) and works around /etc/gconf symlink problem
651 927
652 5 Nov 2005; Preston Cody <codeman@gentoo.org> 928 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
653 webgli: lots of updates. preliminary partitioning. extra packages works. 929 webgli: lots of updates. preliminary partitioning. extra packages works.
654 930
655 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 931 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
656 src/net/server/gliserv.py: 932 src/net/server/gliserv.py:
657 httpd now supports HTTPS and falls back to HTTP if not available 933 httpd now supports HTTPS and falls back to HTTP if not available
658 make fallback actually work 934 make fallback actually work
659 src/net/server/SecureXMLRPCServer.py: 935 src/net/server/SecureXMLRPCServer.py:
660 SecureSocketServer is now threaded 936 SecureSocketServer is now threaded
661 937
662 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 938 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
663 src/net/client/gliclient.py: 939 src/net/client/gliclient.py:
664 try to use HTTPS for XMLRPC first and fallback to HTTP 940 try to use HTTPS for XMLRPC first and fallback to HTTP
665 pretend mode 941 pretend mode
666 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py: 942 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
667 HTTPS XMLRPC goodness from samyron 943 HTTPS XMLRPC goodness from samyron
668 pass name of certificate 944 pass name of certificate
669 945
670 31 Oct 2005; Preston Cody <codeman@gentoo.org> 946 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
671 wegli: daemons and services screens done. 947 wegli: daemons and services screens done.
672 948
673 30 Oct 2005; Preston Cody <codeman@gentoo.org> 949 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
674 webgli: networking and users screens 950 webgli: networking and users screens
675 added return_redirect to handler.py 951 added return_redirect to handler.py
676 loading and saving install/client profiles works for webgli now 952 loading and saving install/client profiles works for webgli now
677 Review also done 953 Review also done
678 954
679*GLI-0.2 (27 Oct 2005) 955*GLI-0.2 (27 Oct 2005)
680 956
681 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 957 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
682 src/templates/x86ArchitectureTemplate.py: 958 src/templates/x86ArchitectureTemplate.py:
683 properly check for bootloader emerge exist status with exitsuccess() 959 properly check for bootloader emerge exist status with exitsuccess()
684 log output of grub install command 960 log output of grub install command
685 add --batch --no-floppy to grub command 961 add --batch --no-floppy to grub command
686 grubinstallstring only gets logged if debug is on 962 grubinstallstring only gets logged if debug is on
687 src/GLIUtility.py: 963 src/GLIUtility.py:
688 update progress bar to 100% when process finishes 964 update progress bar to 100% when process finishes
689 965
690 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 966 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
691 src/GLIClientController.py: 967 src/GLIClientController.py:
692 added debugging code for the interaction between the 2 threads via Event() 968 added debugging code for the interaction between the 2 threads via Event()
693 src/GLIUtility.py: 969 src/GLIUtility.py:
694 doubled the buffer size in spawn() 970 doubled the buffer size in spawn()
695 bump buffer size up to 16384 971 bump buffer size up to 16384
697 src/GLIArchitectureTemplate.py: 973 src/GLIArchitectureTemplate.py:
698 kernelpkgs.txt support code 974 kernelpkgs.txt support code
699 above disabled because it sucks 975 above disabled because it sucks
700 added add_pkg_to_world() 976 added add_pkg_to_world()
701 977
702 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 978 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
703 src/GLIArchitectureTemplate.py: 979 src/GLIArchitectureTemplate.py:
704 use tar | tar to copy files in copy_pkg_to_chroot() 980 use tar | tar to copy files in copy_pkg_to_chroot()
705 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV 981 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
706 982
707 23 Oct 2005; Preston Cody <codeman@gentoo.org> 983 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
708 DEBUGGING ADDED TO AT. verbose field added to CConfig. 984 DEBUGGING ADDED TO AT. verbose field added to CConfig.
709 985
710 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 986 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
711 src/net/server/gliserv.py: 987 src/net/server/gliserv.py:
712 / maps to index.html 988 / maps to index.html
713 look for actual files in html/ 989 look for actual files in html/
714 src/net/html: 990 src/net/html:
715 new template 991 new template
719 added copy_pkg_to_chroot() 995 added copy_pkg_to_chroot()
720 added debug code to dynamic-stage3 996 added debug code to dynamic-stage3
721 switch dynamic-stage3 to new method 997 switch dynamic-stage3 to new method
722 lots of bug fixes from adding debug code 998 lots of bug fixes from adding debug code
723 999
724 22 Oct 2005; Preston Cody <codeman@gentoo.org> 1000 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
725 webgli initial bootloader support + changed make.conf. 1001 webgli initial bootloader support + changed make.conf.
726 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg. 1002 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
727 1003
728 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1004 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
729 src/GLIUtility.py: 1005 src/GLIUtility.py:
730 horrible tangled mess of code that is tarball unpacking subprogress display 1006 horrible tangled mess of code that is tarball unpacking subprogress display
731 add unpack progress to portage snapshot 1007 add unpack progress to portage snapshot
732 use read() instead of readlines() in spawn() 1008 use read() instead of readlines() in spawn()
733 only update progress bar for whole percents 1009 only update progress bar for whole percents
734 1010
735 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1011 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
736 src/templates/x86ArchitectureTemplate.py: 1012 src/templates/x86ArchitectureTemplate.py:
737 change call to 'grub' to use GLIUtility.exitsuccess() 1013 change call to 'grub' to use GLIUtility.exitsuccess()
738 add definition of 'build_mode' in _configure_lilo() 1014 add definition of 'build_mode' in _configure_lilo()
739 src/misc/updategtkfe, src/misc/updateglid: 1015 src/misc/updategtkfe, src/misc/updateglid:
740 fix so subshell is called in root shell 1016 fix so subshell is called in root shell
741 1017
742 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1018 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
743 src/net/server/handlers/WebGLIHandler.py: 1019 src/net/server/handlers/WebGLIHandler.py:
744 stage screen launches URI browser in sized window with various properties set 1020 stage screen launches URI browser in sized window with various properties set
745 1021
746 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1022 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
747 src/misc/updategtkfe: 1023 src/misc/updategtkfe:
748 updated to actually work 1024 updated to actually work
749 remove previous snapshot and extracted dir before downloading 1025 remove previous snapshot and extracted dir before downloading
750 src/misc/updateglid: 1026 src/misc/updateglid:
751 updated to actually work 1027 updated to actually work
752 src/templates/x86ArchitectureTemplate.py: 1028 src/templates/x86ArchitectureTemplate.py:
753 fixed bug where grub code was looking for 'root+root+file_name2' 1029 fixed bug where grub code was looking for 'root+root+file_name2'
754 1030
755 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1031 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
756 src/net/server/handlers/WebGLIHandler.py: 1032 src/net/server/handlers/WebGLIHandler.py:
757 URI browser 1033 URI browser
758 added mirror selection 1034 added mirror selection
759 src/GLIUtility.py: 1035 src/GLIUtility.py:
760 ls via ssh strips off ending * 1036 ls via ssh strips off ending *
761 1037
762 16 Oct 2005; Preston Cody <codeman@gentoo.org> 1038 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
763 more updates to webgli. stage selection. 1039 more updates to webgli. stage selection.
764 1040
765 11 Oct 2005; Preston Cody <codeman@gentoo.org> 1041 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
766 updated webgli with preliminary Network Mounts support. 1042 updated webgli with preliminary Network Mounts support.
767 1043
768 9 Oct 2005; Preston Cody <codeman@gentoo.org> 1044 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
769 GenDialog: string formatting and yes/no label fixes. 1045 GenDialog: string formatting and yes/no label fixes.
770 added WebGLI template for gliserv.py 1046 added WebGLI template for gliserv.py
771 added WebGLIHandler as well as a definition for it in gliserv.py 1047 added WebGLIHandler as well as a definition for it in gliserv.py
772 updates to the webgli files even though they won't be there for long. 1048 updates to the webgli files even though they won't be there for long.
773 Utility: remove exception for non-existant grppkgs.txt until the new livecd 1049 Utility: remove exception for non-existant grppkgs.txt until the new livecd
774 goes public. 1050 goes public.
775 1051
776 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1052 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
777 src/net/server/gliserv.py: 1053 src/net/server/gliserv.py:
778 override dict to not be so anal 1054 override dict to not be so anal
779 main server now loads separate module to handle requests 1055 main server now loads separate module to handle requests
780 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py: 1056 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
781 split out profile URLs into separate handler function 1057 split out profile URLs into separate handler function
782 move handlers into subdirectory 1058 move handlers into subdirectory
783 add Welcome and Clients handlers 1059 add Welcome and Clients handlers
784 1060
785 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1061 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
786 src/GLIUtility.py: 1062 src/GLIUtility.py:
787 raise exception if password prompt received twice 1063 raise exception if password prompt received twice
788 1064
789 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1065 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
790 src/GLIUtility.py: 1066 src/GLIUtility.py:
791 removed rot13ify() 1067 removed rot13ify()
792 1068
793 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1069 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
794 src/net/server/gliserv.py: 1070 src/net/server/gliserv.py:
795 allow for param to be passed multiple times in GET 1071 allow for param to be passed multiple times in GET
796 no XMLRPC functions return None 1072 no XMLRPC functions return None
797 modify POST request parsing to only create a list if needed 1073 modify POST request parsing to only create a list if needed
798 fix GET request parsing so the list creation for multiple values works 1074 fix GET request parsing so the list creation for multiple values works
799 src/net/client/gliclient.py: 1075 src/net/client/gliclient.py:
800 various typo and type mismatch fixes 1076 various typo and type mismatch fixes
801 exit after exception 1077 exit after exception
802 1078
803 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1079 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
804 src/net/client/gliclient.py: 1080 src/net/client/gliclient.py:
805 initial commit 1081 initial commit
806 pass MAC to XMLRPC functions 1082 pass MAC to XMLRPC functions
807 src/net/server/GLIServerProfile.py: 1083 src/net/server/GLIServerProfile.py:
808 rename GLIClientsProfiles to GLIServerProfile 1084 rename GLIClientsProfiles to GLIServerProfile
809 1085
810 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1086 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
811 src/net/server/gliserv.py: 1087 src/net/server/gliserv.py:
812 now handles POST requests 1088 now handles POST requests
813 move majority of request handling code to common_handler() to reduce code 1089 move majority of request handling code to common_handler() to reduce code
814 duplication 1090 duplication
815 profile loading 1091 profile loading
817 /showclients redesign 1093 /showclients redesign
818 template fixes 1094 template fixes
819 allow handler functions to add/change headers 1095 allow handler functions to add/change headers
820 save profile 1096 save profile
821 1097
822 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1098 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
823 src/net/server/GLIClientsProfiles.py: 1099 src/net/server/GLIClientsProfiles.py:
824 initial commit 1100 initial commit
825 src/net/server/template.html: 1101 src/net/server/template.html:
826 initial commit 1102 initial commit
827 src/net/server/gliserv.py: 1103 src/net/server/gliserv.py:
828 add template mojo 1104 add template mojo
829 1105
830 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1106 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
831 src/net/server/gliserv.py: 1107 src/net/server/gliserv.py:
832 XMLRPC mojo 1108 XMLRPC mojo
833 1109
834 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1110 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
835 src/GLIArchitectureTemplate.py: 1111 src/GLIArchitectureTemplate.py:
836 add code in _edit_config() to comment line where variable is defined 1112 add code in _edit_config() to comment line where variable is defined
837 previously 1113 previously
838 insert new line under previous definition of variable if it exists 1114 insert new line under previous definition of variable if it exists
839 small _edit_config() cleanup 1115 small _edit_config() cleanup
840 src/GLIStorageDevice.py: 1116 src/GLIStorageDevice.py:
841 add clear_partitions() function 1117 add clear_partitions() function
842 new sizes for recommended partition layout 1118 new sizes for recommended partition layout
843 automatically calculate swap size for recommended layout 1119 automatically calculate swap size for recommended layout
844 1120
845 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1121 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
846 src/templates/x86ArchitectureTemplate.py: 1122 src/templates/x86ArchitectureTemplate.py:
847 fat16 mojo 1123 fat16 mojo
848 1124
849 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1125 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
850 src/GLIStorageDevice.py: 1126 src/GLIStorageDevice.py:
851 prevent do_recommended() from being run twice 1127 prevent do_recommended() from being run twice
852 rewrite do_recommended() to be more robust 1128 rewrite do_recommended() to be more robust
853 src/GLIArchitectureTemplate.py: 1129 src/GLIArchitectureTemplate.py:
854 rework _edit_config() to not write duplicate entries 1130 rework _edit_config() to not write duplicate entries
855 1131
856 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1132 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
857 src/GLIStorageDevice.py: 1133 src/GLIStorageDevice.py:
858 added do_recommended() function to automatically created 256M/1G/* layout 1134 added do_recommended() function to automatically created 256M/1G/* layout
859 1135
860 17 Sep 2005; Preston Cody <codeman@gentoo.org> 1136 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
861 src/gli-dialog.py: added set_distcc to the list 1137 src/gli-dialog.py: added set_distcc to the list
862 GenDialog: added set_distcc. untested. 1138 GenDialog: added set_distcc. untested.
863 IP: added install_distcc flag. 1139 IP: added install_distcc flag.
864 AT: added install_distcc function based on the flag. runs after build_kernel 1140 AT: added install_distcc function based on the flag. runs after build_kernel
865 changed AT spawn command for distcc for nodeps. 1141 changed AT spawn command for distcc for nodeps.
866 1142
867 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1143 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
868 src/GLIUtility.py: 1144 src/GLIUtility.py:
869 add rot13ify() function 1145 add rot13ify() function
870 1146
871 16 Sep 2005; Preston Cody <codeman@gentoo.org> 1147 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
872 src/GenDialog.py 1148 src/GenDialog.py:
873 added a sentence of text. unchecking support added. 1149 added a sentence of text. unchecking support added.
874 1150
875 15 Sep 2005; Preston Cody <codeman@gentoo.org> 1151 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
876 src/GLIUtility.py 1152 src/GLIUtility.py:
877 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus 1153 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
878 src/GenDialog.py 1154 src/GenDialog.py:
879 still working on extra_packages. transformed the list to new format. 1155 still working on extra_packages. transformed the list to new format.
880 added GRP indication to list. untested. 1156 added GRP indication to list. untested.
881 TODO lists updated. 1157 TODO lists updated.
882 src/fe/dialog/gli-dialog.py 1158 src/fe/dialog/gli-dialog.py:
883 spelling mistook. 1159 spelling mistook.
884 1160
885 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1161 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
886 src/GLIUtility.py: 1162 src/GLIUtility.py:
887 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found 1163 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
888 1164
889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1165 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
890 src/GLIUtility.py: 1166 src/GLIUtility.py:
891 add get_directory_listing_from_uri() 1167 add get_directory_listing_from_uri()
892 add http support to above 1168 add http support to above
893 add ftp support to above 1169 add ftp support to above
894 add scp support to above 1170 add scp support to above
895 src/GLIArchitectureTemplate.py: 1171 src/GLIArchitectureTemplate.py:
896 "0" instead of 0 for key of single-element dict passed to _edit_config() 1172 "0" instead of 0 for key of single-element dict passed to _edit_config()
897 1173
898 5 Sep 2005; Preston Cody <codeman@gentoo.org> 1174 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
899 value_only -> only_value 1175 value_only -> only_value
900 1176
901 3 Sep 2005; Preston Cody <codeman@gentoo.org> 1177 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
902 gutted out all of etc_portage structure since it is now all handled by 1178 gutted out all of etc_portage structure since it is now all handled by
903 etc_files 1179 etc_files
904 1180
905 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1181 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
906 src/GLIArchitectureTemplate.py: 1182 src/GLIArchitectureTemplate.py:
907 install_packages() sends progress update notifications 1183 install_packages() sends progress update notifications
908 src/templates/x86ArchitectureTemplate.py: 1184 src/templates/x86ArchitectureTemplate.py:
909 increase sleep to 5s between format tries 1185 increase sleep to 5s between format tries
910 src/GLIClientController.py: 1186 src/GLIClientController.py:
911 pass 'self' to AT instead of 'self._pretend' 1187 pass 'self' to AT instead of 'self._pretend'
912 1188
913 2 Sep 2005; Preston Cody <codeman@gentoo.org> 1189 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
914 logger -> logger.log in x86AT 1190 logger -> logger.log in x86AT
915 1191
916 1 Sep 2005; Preston Cody <codeman@gentoo.org> 1192 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
917 added set_etc_portage to IP. debugging gli-d's support for it. 1193 added set_etc_portage to IP. debugging gli-d's support for it.
918 1194
919 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1195 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
920 src/templates/x86ArchitectureTemplate.py: 1196 src/templates/x86ArchitectureTemplate.py:
921 switch to 3 tries for mkfs instead of looping waiting for dev node to exist 1197 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
922 1198
923 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1199 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
924 src/GLIArchitectureTemplate.py: 1200 src/GLIArchitectureTemplate.py:
925 add _portage_best_version() function and rework install_packages() to allow 1201 add _portage_best_version() function and rework install_packages() to allow
926 for future X of Y tracking 1202 for future X of Y tracking
927 Use best_visible instead of best_version 1203 Use best_visible instead of best_version
928 tracked down and fixed missing = causing empty install extra packages 1204 tracked down and fixed missing = causing empty install extra packages
929 use = when emerging also 1205 use = when emerging also
930 quickpkg hokey pokey 1206 quickpkg hokey pokey
931 run _get_packages_to_emerge() again with -pk 1207 run _get_packages_to_emerge() again with -pk
932 1208
933 22 Aug 2005; Preston Cody <codeman@gentoo.org> 1209 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
1210 src/ArchTemplate:
934 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at 1211 removed install_xorg_x11, and put the xorg.conf copying at
935 the end of install_packages. 1212 the end of install_packages.
936 added updateglid to /src/misc 1213 added updateglid to /src/misc
937 updated all core files with new GPL notice and copyright statement. 1214 updated all core files with new GPL notice and copyright statement.
938 1215
939 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1216 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
940 src/GLIUtility.py: 1217 src/GLIUtility.py:
941 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find 1218 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
942 a snapshot in /mnt/cdrom/snapshots/ 1219 a snapshot in /mnt/cdrom/snapshots/
943 get_snapshot_from_cd() adds file:// at the beginning 1220 get_snapshot_from_cd() adds file:// at the beginning
944 change calls to extra package special case functions to 'self.blah' 1221 change calls to extra package special case functions to 'self.blah'
945 1222
946 21 Aug 2005; Preston Cody <codeman@gentoo.org> 1223 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
947 src/ArchTemplate: changed "voodoo". 1224 src/ArchTemplate: changed "voodoo".
948 changed order of portage sync methods. made a fallback to webrsync if 1225 changed order of portage sync methods. made a fallback to webrsync if
949 normal emerge sync fails. 1226 normal emerge sync fails.
950 removed get_sources_from_cd because it is obsolete. 1227 removed get_sources_from_cd because it is obsolete.
951 add special cases to install_packages. remove fatal exception on package 1228 add special cases to install_packages. remove fatal exception on package
953 add install_xorg_x11. remove adding of xdm to runlevel. this will now be 1230 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
954 handled in the FEs. 1231 handled in the FEs.
955 src/GenDialog: added a bunch of code for dealing with x11-based packages. 1232 src/GenDialog: added a bunch of code for dealing with x11-based packages.
956 awaiting testing. 1233 awaiting testing.
957 1234
958 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1235 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
959 src/GLIStorageDevice.py: 1236 src/GLIStorageDevice.py:
960 global try/except block around fs resizable detection code 1237 global try/except block around fs resizable detection code
961 src/GLIArchitectureTemplate.py, src/GLIClientController.py: 1238 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
962 install-failed cleanup function 1239 install-failed cleanup function
963 1240
964 18 Aug 2005; Preston Cody <codeman@gentoo.org> 1241 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
965 x86ArchTemplate: updated lilo code. separated out THREE commands. untested. 1242 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
966 1243
967 16 Aug 2005; Preston Cody <codeman@gentoo.org> 1244 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
968 GLIGenDialog: 1245 GLIGenDialog:
969 add drive choices for loaded configs. 1246 add drive choices for loaded configs.
970 force snapshot for dynamic_stage3 1247 force snapshot for dynamic_stage3
971 init the snapshoturi input to the cd snapshot if not already selected. 1248 init the snapshoturi input to the cd snapshot if not already selected.
972 if dynamic_stage3, skip the make.conf step. 1249 if dynamic_stage3, skip the make.conf step.
973 GLIUtility: add get_cd_snapshot_uri() for local snapshots. 1250 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
974 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog 1251 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
975 1252
976 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1253 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
977 src/GLIArchitectureTemplate.py: 1254 src/GLIArchitectureTemplate.py:
978 manually call MAKEDEV in stage3-dynamic code 1255 manually call MAKEDEV in stage3-dynamic code
979 copy /etc/inittab.old to /etc/inittab in chroot 1256 copy /etc/inittab.old to /etc/inittab in chroot
980 src/GLIUtility.py: 1257 src/GLIUtility.py:
981 add beginning of validate_uri() function 1258 add beginning of validate_uri() function
982 add file:/// support to validate_uri() 1259 add file:/// support to validate_uri()
983 single quotes when setting livecd password 1260 single quotes when setting livecd password
984 1261
985 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1262 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
986 src/GLIGenDialog.py: 1263 src/GLIGenDialog.py:
987 change getmountpoint() to get_mountpoint() 1264 change getmountpoint() to get_mountpoint()
988 src/misc/updategtkfe: 1265 src/misc/updategtkfe:
989 committed script to automatically download latest snapshot and run gtkfe 1266 committed script to automatically download latest snapshot and run gtkfe
990 src/templates/x86ArchitectureTemplate.py: 1267 src/templates/x86ArchitectureTemplate.py:
991 fix _configure_lilo_add_windows() for IP -> GLISD stuff 1268 fix _configure_lilo_add_windows() for IP -> GLISD stuff
992 src/GLIArchitectureTemplate.py: 1269 src/GLIArchitectureTemplate.py:
993 give tmp_minor an initial value in mount_local_partitions so that the value 1270 give tmp_minor an initial value in mount_local_partitions so that the value
994 remain from the previous drive 1271 remain from the previous drive
995 1272
996 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1273 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
997 src/templates/x86ArchitectureTemplate.py: 1274 src/templates/x86ArchitectureTemplate.py:
998 Fix _configure_lilo() for IP using GLISD stuff 1275 Fix _configure_lilo() for IP using GLISD stuff
999 src/GLIArchitectureTemplate.py: 1276 src/GLIArchitectureTemplate.py:
1000 install_cron_daemon() treats "none" specially 1277 install_cron_daemon() treats "none" specially
1001 1278
1002 14 Aug 2005; Preston Cody <codeman@gentoo.org> 1279 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1003 old patch from Steven Mertens to resolve bug #96642 1280 old patch from Steven Mertens to resolve bug #96642
1004 numerous asthetic changes to GenDialog, no real functionality changes though. 1281 numerous asthetic changes to GenDialog, no real functionality changes though.
1005 strings renamed for global use if necessary. 1282 strings renamed for global use if necessary.
1006 fix all three parts of bug 102291 1283 fix all three parts of bug 102291
1007 disable set_etc_portage until fully-written. 1284 disable set_etc_portage until fully-written.
1008 1285
1009 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1286 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1010 src/GLIClientController.py: 1287 src/GLIClientController.py:
1011 lower-case http/ftp proxy envvars 1288 lower-case http/ftp proxy envvars
1012 1289
1013 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1290 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1014 src/GLIClientController.py: 1291 src/GLIClientController.py:
1015 log end of pre_install steps to aid in debugging 1292 log end of pre_install steps to aid in debugging
1016 src/templates/x86ArchitectureTemplate.py: 1293 src/templates/x86ArchitectureTemplate.py:
1017 change set_flag(flag) to set_flag(flag, True)...*stab* *stab* 1294 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1018 1295
1019 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1296 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1020 src/GLIArchitectureTemplate.py 1297 src/GLIArchitectureTemplate.py:
1021 check to make sure that the device node we're wait for to exist isn't of 1298 check to make sure that the device node we're wait for to exist isn't of
1022 type 'free' 1299 type 'free'
1023 1300
1024 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1301 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1025 src/GLIGenDialog.py: 1302 src/GLIGenDialog.py:
1026 convert install_packages to list in set_extra_packages() 1303 convert install_packages to list in set_extra_packages()
1027 check return code of checklist() call in "Manual" section 1304 check return code of checklist() call in "Manual" section
1028 *actually* fix the first problem 1305 *actually* fix the first problem
1029 1306
1030 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py: 1307 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1031 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash 1308 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1032 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT). 1309 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1033 1310
1034 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1311 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1035 src/GLIArchitectureTemplate.py: 1312 src/GLIArchitectureTemplate.py:
1036 re-fix net.eth1+ symlink code...wtf is wrong with cvs? 1313 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1037 1314
1038 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1315 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1039 Add CDATA support to SimpleXMLParser and add utility functions for it. 1316 Add CDATA support to SimpleXMLParser and add utility functions for it.
1040 1317
1041 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> 1318 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1042 src/GLIArchitectureTemplate.py: 1319 src/GLIArchitectureTemplate.py:
1043 Fix case where vixie-cron is specified as a full package atom, as we still 1320 Fix case where vixie-cron is specified as a full package atom, as we still
1044 don't want to run 'crontab /etc/crontab' for it. 1321 don't want to run 'crontab /etc/crontab' for it.
1045 1322
1046*GLI-0.1 (3 Aug 2005) 1323*GLI-0.1 (3 Aug 2005)
1047 1324
1048 30 Jul 2005; Preston Cody <codeman@gentoo.org> 1325 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1049 add scp to list of is_uri() so GenDialog doesn't complain. 1326 add scp to list of is_uri() so GenDialog doesn't complain.
1050 fixed livecd-kernel bug in bootloader code. 1327 fixed livecd-kernel bug in bootloader code.
1051 fixed gendialog for dynamic_stage3 instead of "networkless" 1328 fixed gendialog for dynamic_stage3 instead of "networkless"
1052 change bootloader to allow for both initrd and initramfs. 1329 change bootloader to allow for both initrd and initramfs.
1053 fix IP for dynamic_stage3. 1330 fix IP for dynamic_stage3.
1054 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing. 1331 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1055 1332
1056 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1333 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1057 Added full scp:// URI support to get_uri() in GLIUtility 1334 Added full scp:// URI support to get_uri() in GLIUtility
1058 Remove "networkless" from dynamic stage3 if locic. 1335 Remove "networkless" from dynamic stage3 if locic.
1059 Remove print statement from scp:// code. 1336 Remove print statement from scp:// code.
1060 Change scp code to check for "assword: " instead of "Password:" 1337 Change scp code to check for "assword: " instead of "Password:"
1061 Fix post-install network code to create net.eth1+ symlink correctly 1338 Fix post-install network code to create net.eth1+ symlink correctly
1063 Add 2>dev/null to emerge call in _get_packages_to_emerge() 1340 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1064 SimpleXMLParser handles True/False/None correctly now 1341 SimpleXMLParser handles True/False/None correctly now
1065 Comment out above fix 1342 Comment out above fix
1066 Add partitioning wait-for-device-to-exist code to mount_local_partitions 1343 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1067 1344
1068 28 Jul 2005; Scott Myron <samyron@gentoo.org> 1345 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1069 Removed a FIXME in the GLIClientConfiguration that is no 1346 Removed a FIXME in the GLIClientConfiguration that is no
1070 longer needed. 1347 longer needed.
1071 1348
1072 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1349 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1073 Default to x86 in ClientConfig 1350 Default to x86 in ClientConfig
1074 Typo in build-a-stage3 code. 1351 Typo in build-a-stage3 code.
1075 Remove MAKEDEV call in build-a-stage3 postscript. 1352 Remove MAKEDEV call in build-a-stage3 postscript.
1076 1353
1077 26 Jul 2005; Preston Cody <codeman@gentoo.org> 1354 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1078 Rewrote init of IP for gli-d. Other GenDialog updates. 1355 Rewrote init of IP for gli-d. Other GenDialog updates.
1079 allow network_type to be None in CConfig. 1356 allow network_type to be None in CConfig.
1080 1357
1081 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1358 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1082 Add _dynamic_stage3 option to IP. 1359 Add _dynamic_stage3 option to IP.
1083 Add check for that option to dynamic stage3 code in ArchTemplate. 1360 Add check for that option to dynamic stage3 code in ArchTemplate.
1084 Fix code to determine default route in get_eth_info() in GLIUtility. 1361 Fix code to determine default route in get_eth_info() in GLIUtility.
1085 Fix serialization of dns-servers in ClientConfig. 1362 Fix serialization of dns-servers in ClientConfig.
1086 1363
1087 24 Jul 2005; Preston Cody <codeman@gentoo.org> 1364 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1088 changed default values of cron/logger in IP. 1365 changed default values of cron/logger in IP.
1089 moved GenDialog IP init out to the individual files. gli-dialog's version 1366 moved GenDialog IP init out to the individual files. gli-dialog's version
1090 will change quite a bit. 1367 will change quite a bit.
1091 1368
1092 22 Jul 2005; Preston Cody <codeman@gentoo.org> 1369 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1093 added ppcArchTemplate. blank now. working on yaboot. 1370 added ppcArchTemplate. blank now. working on yaboot.
1094 modified ArchTemplate for amd64 and ppc custom kernels. 1371 modified ArchTemplate for amd64 and ppc custom kernels.
1095 skeleton implementation of _configure_yaboot. 1372 skeleton implementation of _configure_yaboot.
1096 small fixes to other templates. 1373 small fixes to other templates.
1097 1374
1098 21 Jul 2005; Preston Cody <codeman@gentoo.org> 1375 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1099 GenDialog updates. changed comment in IP. 1376 GenDialog updates. changed comment in IP.
1100 1377
1101 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org> 1378 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1102 src/GLIInstallProfile.py: 1379 src/GLIInstallProfile.py:
1103 Fix codeman's screwup of changing the service seperator to ',' in the parser 1380 Fix codeman's screwup of changing the service seperator to ',' in the parser
1121 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for 1398 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1122 bootloader works again. Also rename _install_{grub,lilo} to 1399 bootloader works again. Also rename _install_{grub,lilo} to
1123 _configure_{grub,lilo} since they don't install the loaders anymore 1400 _configure_{grub,lilo} since they don't install the loaders anymore
1124 themselves. 1401 themselves.
1125 1402
1126 7 Jul 2005; Preston Cody <codeman@gentoo.org> 1403 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1127 fix global USE flags to not include the arch types at the end. 1404 fix global USE flags to not include the arch types at the end.
1128 updates to GenDialog and gli-d. 1405 updates to GenDialog and gli-d.
1129 1406
1130 6 Jul 2005; Preston Cody <codeman@gentoo.org> 1407 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1131 fixing bootloader code for no initrd and initrd->initramfs naming change. 1408 fixing bootloader code for no initrd and initrd->initramfs naming change.
1132 1409
1133 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1410 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1134 Proper comments and parameters to GLIException in install_mta() 1411 Proper comments and parameters to GLIException in install_mta()
1135 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors() 1412 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1136 Add strip() to list_mirrors(), list_subarch_from_mirror() and 1413 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1137 list_tarball_from_mirror() to eliminate blank last item. 1414 list_tarball_from_mirror() to eliminate blank last item.
1138 1415
1139 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1416 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1140 Added stage3 generation code. 1417 Added stage3 generation code.
1141 1418
1142 5 Jul 2005; Preston Cody <codeman@gentoo.org> 1419 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1143 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge 1420 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1144 Mild changes to GenDialog. 1421 Mild changes to GenDialog.
1145 1422
1146 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1423 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1147 Remove separate install step configure_rc_conf() since it's handled by 1424 Remove separate install step configure_rc_conf() since it's handled by
1148 update_config_files() 1425 update_config_files()
1149 Make a copy of newvalues in _edit_config() so quotes aren't added when the 1426 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1150 function is called twice on the same file. 1427 function is called twice on the same file.
1151 1428
1152 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1429 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1153 Missing \ in sed in _get_packages_to_emerge() 1430 Missing \ in sed in _get_packages_to_emerge()
1154 Removed explicit emerging of hotplug and no longer add it to the runlevel. 1431 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1155 Check in _quickpkg_deps() to ignore blank package names returned from 1432 Check in _quickpkg_deps() to ignore blank package names returned from
1156 _get_packages_to_emerge() 1433 _get_packages_to_emerge()
1157 1434
1158 28 Jun 2005; Preston Cody <codeman@gentoo.org> 1435 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1159 fixed agaffney's missing = and extra : in x86AT. commented out crashing line 1436 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1160 in the dialog.py gauge code. 1437 in the dialog.py gauge code.
1161 1438
1162 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1439 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1163 Add code to update_config_files() to go through etc_files and update stuff. 1440 Add code to update_config_files() to go through etc_files and update stuff.
1164 Check to see that _etc_files['make.conf'] exists in get_make_conf() 1441 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1165 Only use float() in partition xml parsing code if type == "free" 1442 Only use float() in partition xml parsing code if type == "free"
1166 1443
1167 28 Jun 2005; Preston Cody <codeman@gentoo.org> 1444 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1168 finished almost all internationalization of GenDialog. 1445 finished almost all internationalization of GenDialog.
1169 attempt at fixing rc.conf function. moved 3 generate functions out of 1446 attempt at fixing rc.conf function. moved 3 generate functions out of
1170 fe/gtk/RcDotConf and put them in Utility. fixed self bug. 1447 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1171 added dialog.py to the fe/dialog directory so it actually gets used. 1448 added dialog.py to the fe/dialog directory so it actually gets used.
1172 1449
1173 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1450 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1174 Roll rc_conf and make_conf into master etc_files structure in InstallProfile. 1451 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1175 1452
1176 27 Jun 2005; Preston Cody <codeman@gentoo.org> 1453 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1177 fix extra entry in list_mirrors() 1454 fix extra entry in list_mirrors()
1178 beginning internationalization runthrough. 1455 beginning internationalization runthrough.
1179 1456
1180 26 Jun 2005; Preston Cody <codeman@gentoo.org> 1457 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1181 added dialog.py to /src temporarily until it gets accepted upstream. 1458 added dialog.py to /src temporarily until it gets accepted upstream.
1182 fix for unused value in form in dialog.py and changed heights. 1459 fix for unused value in form in dialog.py and changed heights.
1183 fix GenDialog forms. 1460 fix GenDialog forms.
1184 1461
1185 25 Jun 2005; Preston Cody <codeman@gentoo.org> 1462 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1186 Changed hostname/domainname for new baselayout. 1463 Changed hostname/domainname for new baselayout.
1187 Changed _add_to_runlevel errors to logs. 1464 Changed _add_to_runlevel errors to logs.
1188 Updated TODO list to show status of GenDialog 1465 Updated TODO list to show status of GenDialog
1189 More updates to GenDialog including two checklists that probably won't work. 1466 More updates to GenDialog including two checklists that probably won't work.
1190 update IP to use comma-separated list instead of space separated for services. 1467 update IP to use comma-separated list instead of space separated for services.
1191 1468
1192 24 Jun 2005; Preston Cody <codeman@gentoo.org> 1469 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1193 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to 1470 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1194 GenDialog as it gets closer to completion. 1471 GenDialog as it gets closer to completion.
1195 1472
1196 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1473 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1197 Modify get_eth_info() to take a full interface name (eth0 fex). float() 1474 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1198 instead of int() in add_partition_device_partition() for minor (closes 96804) 1475 instead of int() in add_partition_device_partition() for minor (closes 96804)
1199 1476
1200 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1477 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1201 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"' 1478 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1202 instead of 'interfaces[interface][1]' since DHCP uses that field for its 1479 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1203 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net. 1480 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1204 1481
1205 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1482 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1206 Apply spawn() patch from #96644 (with minor changes). Make sure the return 1483 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1207 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix 1484 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1208 small error with <pipe>.close() returning None. Fix space vs. tab issue. 1485 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1209 Fix undefined variable 'output' issue in spawn(). 1486 Fix undefined variable 'output' issue in spawn().
1210 1487
1211 20 Jun 2005; Preston Cody <codeman@gentoo.org> 1488 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1212 More updates to GenDialog and gli-d. 1489 More updates to GenDialog and gli-d.
1213 1490
1214 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1491 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1215 Modify list_mirrors() to return a list of mirror URL/name pairs. 1492 Modify list_mirrors() to return a list of mirror URL/name pairs.
1216 1493
1217 19 Jun 2005; Preston Cody <codeman@gentoo.org> 1494 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1218 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to 1495 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1219 get subarch. 1496 get subarch.
1220 1497
1221 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1498 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1222 Backend partitioning will create disklabel is none exists. Installprofile 1499 Backend partitioning will create disklabel is none exists. Installprofile
1223 defaults to "" now instead of "msdos" for disklabel type. Fix for 1500 defaults to "" now instead of "msdos" for disklabel type. Fix for
1224 mount_local_partitions() to remember device along with minor in the 1501 mount_local_partitions() to remember device along with minor in the
1225 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and 1502 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1226 add else block to log unsupported netmount types to mount_network_shares() 1503 add else block to log unsupported netmount types to mount_network_shares()
1227 1504
1228 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1505 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1229 src/GLIArchitectureTemplate.py: 1506 src/GLIArchitectureTemplate.py:
1230 Refactor kernel_compile common stuff, fix 2.4 build process. 1507 Refactor kernel_compile common stuff, fix 2.4 build process.
1231 src/fe/cli/clife.py: 1508 src/fe/cli/clife.py:
1232 Logging system. 1509 Logging system.
1233 src/GLIUtility.py, src/GLIStorageDevice.py: 1510 src/GLIUtility.py, src/GLIStorageDevice.py:
1234 Add comments about re-writes needed for boxes without sysfs. 1511 Add comments about re-writes needed for boxes without sysfs.
1235 1512
1236 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1513 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1237 src/GLIArchitectureTemplate.py: 1514 src/GLIArchitectureTemplate.py:
1238 2.4 support (pull version data from /usr/src/linux/Makefile), incl. 1515 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1239 'make dep' call for custom compile. build_mode support for prepare-only and 1516 'make dep' call for custom compile. build_mode support for prepare-only and
1240 none types completed. custom compile function chains shell functions in 1517 none types completed. custom compile function chains shell functions in
1241 spawned script, to allow for catching all errors. 1518 spawned script, to allow for catching all errors.
1242 1519
1243 15 Jun 2005; Preston Cody <codeman@gentoo.org> 1520 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1244 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe 1521 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1245 and GenDialog. other gendialog updates as well. kernel updates untested. 1522 and GenDialog. other gendialog updates as well. kernel updates untested.
1246 1523
1247 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1524 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1248 src/GLIInstallProfile.py: 1525 src/GLIInstallProfile.py:
1249 Change structure of etc-portage stuff. The serialization was broken before my 1526 Change structure of etc-portage stuff. The serialization was broken before my
1250 last commit, and I am the only person that's ever used it. The new schema is 1527 last commit, and I am the only person that's ever used it. The new schema is
1251 as follows: 1528 as follows:
1252 <etc-portage> 1529 <etc-portage>
1263 </entry> 1540 </entry>
1264 </file> 1541 </file>
1265 </etc-portage> 1542 </etc-portage>
1266 1543
1267 1544
1268 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1545 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1269 src/GLIInstallProfile.py: 1546 src/GLIInstallProfile.py:
1270 Add new entry for gli-profile/kernel-build-method item. Add missing 1547 Add new entry for gli-profile/kernel-build-method item. Add missing
1271 serialize_etc_portage (temporary). Make serialize_make_conf always print the 1548 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1272 keys in the same order. 1549 keys in the same order.
1273 1550
1274 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1551 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1275 src/GLIArchitectureTemplate.py: 1552 src/GLIArchitectureTemplate.py:
1276 Clean up commenting used by _edit_config(), and fix bug where wrong comment 1553 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1277 was repeatedly appended to make.conf. 1554 was repeatedly appended to make.conf.
1278 1555
1279 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1556 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1281 Put some Linux-2.6 specific code under a if statement. Store list of 1558 Put some Linux-2.6 specific code under a if statement. Store list of
1282 successfully mounted swap device for using swapoff. Add proper error checking 1559 successfully mounted swap device for using swapoff. Add proper error checking
1283 to install_packages and install_filesystem_tools. Fixed namespace conflicts on 1560 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1284 'file'. Clean up some redundant code (thanks to pychecker).' 1561 'file'. Clean up some redundant code (thanks to pychecker).'
1285 1562
1286 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1563 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1287 Fix typos: get_extended() instead of get_extended_partition(). Added 1564 Fix typos: get_extended() instead of get_extended_partition(). Added
1288 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility. 1565 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1289 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync' 1566 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1290 1567
1291 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> 1568 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1292 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed 1569 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1293 in add_network_interface. 1570 in add_network_interface.
1294 1571
1295 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py: 1572 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1573 src/GLIArchitectureTemplate.py:
1296 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any 1574 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1297 usage - this caused a failure for stage1/stage2 previously. swapoff for swap 1575 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1298 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during 1576 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1299 prepare_chroot. 1577 prepare_chroot.
1300 1578
1302 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog, 1580 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1303 +src/fe/installer-gtk: 1581 +src/fe/installer-gtk:
1304 Add new automated CLI frontend. Add scripts that are the intended means to 1582 Add new automated CLI frontend. Add scripts that are the intended means to
1305 use each frontend. 1583 use each frontend.
1306 1584
1307 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1585 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1308 src/GLIClientController.py: 1586 src/GLIClientController.py:
1309 Add null type to network config, for cases where the interface is already up 1587 Add null type to network config, for cases where the interface is already up
1310 and should not be touched (netboot for example). 1588 and should not be touched (netboot for example).
1311 1589
1312 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1590 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1313 src/GLIArchitectureTemplate.py: 1591 src/GLIArchitectureTemplate.py:
1314 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a 1592 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1315 string!. Try to use binary packages if available by default. 1593 string!. Try to use binary packages if available by default.
1316 1594
1317 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1595 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1318 src/GLIArchitectureTemplate.py: 1596 src/GLIArchitectureTemplate.py:
1319 More error checking for _add_to_runlevel, to ensure that the init script 1597 More error checking for _add_to_runlevel, to ensure that the init script
1320 actually exists before we try to add it. set_services phase must take place 1598 actually exists before we try to add it. set_services phase must take place
1321 after the package installation, otherwise the init scripts might not exist. 1599 after the package installation, otherwise the init scripts might not exist.
1322 Find the correct init script for the cron and logging daemons, and add that 1600 Find the correct init script for the cron and logging daemons, and add that
1323 instead of the package atom. 1601 instead of the package atom.
1324 1602
1325 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1603 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1326 src/GLIArchitectureTemplate.py: 1604 src/GLIArchitectureTemplate.py:
1327 Fix up _edit_config so that it works if the file doesn't already exist. Fix 1605 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1328 usage of 'file' to 'contents' for the variable name, as it shadows 1606 usage of 'file' to 'contents' for the variable name, as it shadows
1329 __builtin__.file. 1607 __builtin__.file.
1330 1608
1331 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1609 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1332 src/GLIArchitectureTemplate.py: 1610 src/GLIArchitectureTemplate.py:
1333 Add MTA install code, and include MTA install phase. Ensure 1611 Add MTA install code, and include MTA install phase. Ensure
1334 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support 1612 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1335 for 'none' kernel config for build_kernel phase. Put kernel_script in 1613 for 'none' kernel config for build_kernel phase. Put kernel_script in
1336 /var/tmp instead of /root for build_kernel phase. 1614 /var/tmp instead of /root for build_kernel phase.
1337 1615
1338 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py: 1616 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1339 Rename mta variables to match syslog/cron variables. 1617 Rename mta variables to match syslog/cron variables.
1340 1618
1341 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1619 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1342 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py, 1620 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1343 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore, 1621 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1344 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore, 1622 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1345 src/templates/.cvsignore, src/tests/.cvsignore: 1623 src/templates/.cvsignore, src/tests/.cvsignore:
1346 Refactor partition formatting again to include error checking. Allow 'none' 1624 Refactor partition formatting again to include error checking. Allow 'none'
1347 for kernel and bootloader specifications. Add .cvsignore files for .py[co]. 1625 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1348 1626
1349 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1627 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1350 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py: 1628 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1351 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to 1629 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1352 only have a single spawn call. 1630 only have a single spawn call.
1353 1631
1354 11 Jun 2005; Preston Cody <codeman@gentoo.org> 1632 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1355 refixed samyron's fix of set_architecture_template. 1633 refixed samyron's fix of set_architecture_template.
1356 1634
1357 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1635 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1358 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always 1636 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1359 be executable. 1637 be executable.
1360 1638
1361 10 Jun 2005; Scott Myron <samyron@gentoo.org> 1639 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1362 Fixed one of the FIXME's in the ClientConfiguration. There is now some 1640 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1363 error checking when you call set_architecture_template. 1641 error checking when you call set_architecture_template.
1364 1642
1365 10 Jun 2005; Preston Cody <codeman@gentoo.org> 1643 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1366 moved the mkfsopts input to the partition options menu instead of the during 1644 moved the mkfsopts input to the partition options menu instead of the during
1367 the creation process. updated GenDialog to say it supports reiserfs v3. 1645 the creation process. updated GenDialog to say it supports reiserfs v3.
1368 1646
1369 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py, 1647 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1370 src/GLIStorageDevice.py, fe/dialog/dialogfe.py: 1648 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1371 Complete support for 'mkfsopts' parameter in main system and dialogfe. 1649 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1372 Add support for other partition types to dialogfe. 1650 Add support for other partition types to dialogfe.
1373 Fix all usages of int(possible_big_number) to long(possible_bit_number) to 1651 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1374 avoid integer overflows and wraparounds. 1652 avoid integer overflows and wraparounds.
1375 1653
1376 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1654 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1377 Removed start/end from XML output and added mkfsopts to partitioning info. 1655 Removed start/end from XML output and added mkfsopts to partitioning info.
1378 'mkfsopts' parameter is now used and support for creating xfs, jfs, and 1656 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1379 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser' 1657 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1380 in GLIClientConfiguration. Change from .1 and .9 to constants for 1658 in GLIClientConfiguration. Change from .1 and .9 to constants for
1381 partitioning. Fix free space overwriting bug. Remove a few unused functions 1659 partitioning. Fix free space overwriting bug. Remove a few unused functions
1382 from rewrite. Fix call to get_partition_at() 1660 from rewrite. Fix call to get_partition_at()
1383 1661
1384 8 Jun 2005; Preston Cody <codeman@gentoo.org> 1662 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1385 Updates to GenDialog and dialogfe. 1663 Updates to GenDialog and dialogfe.
1386 1664
1387 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1665 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1388 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker 1666 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1389 1667
1390 6 Jun 2005; Preston Cody <codeman@gentoo.org> 1668 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1391 more GenDialog updates to partitioning. 1669 more GenDialog updates to partitioning.
1392 1670
1393 5 Jun 2005; Preston Cody <codeman@gentoo.org> 1671 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1394 Indenting issue in GLISD/get_ordered_partition_list. 1672 Indenting issue in GLISD/get_ordered_partition_list.
1395 updates to GenDialog partitioning and added default UTC for timezone in IP. 1673 updates to GenDialog partitioning and added default UTC for timezone in IP.
1396 1674
1397 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1675 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1398 Added GLISD.get_model() 1676 Added GLISD.get_model()
1399 1677
1400 3 Jun 2005; Preston Cody <codeman@gentoo.org> 1678 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1401 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version. 1679 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1402 More updates to GenDialog :) 1680 More updates to GenDialog :)
1403 1681
1404 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1682 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1405 Added get_interface_realname() function. 1683 Added get_interface_realname() function.
1406 1684
1407 2 Jun 2005; Preston Cody <codeman@gentoo.org> 1685 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1408 Added auto-save of CConfig and copying to new /root after install. 1686 Added auto-save of CConfig and copying to new /root after install.
1409 yet even more GenDialog updates. 1687 yet even more GenDialog updates.
1410 1688
1411 1 Jun 2005; Preston Cody <codeman@gentoo.org> 1689 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1412 removed print statement from GLISD. more updates to GenDialog. 1690 removed print statement from GLISD. more updates to GenDialog.
1413 1691
1414 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1692 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1415 Not being able to fetch the stage tarball is now an exception. Chroot wrapper 1693 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1416 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be 1694 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1417 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few 1695 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1418 places in GLIClientConfiguration. 1696 places in GLIClientConfiguration.
1419 1697
1420 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1698 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1421 Fix mount_local_partitions(), configure_fstab(), and 1699 Fix mount_local_partitions(), configure_fstab(), and
1422 install_filesystem_tools() to use GLISD directly. A few more fixes for same. 1700 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1423 A few more fixes for templates/x86Archtemplate 1701 A few more fixes for templates/x86Archtemplate
1424 1702
1425 27 May 2005; Preston Cody <codeman@gentoo.org> 1703 27 May 2005; Preston Cody <codeman@gentoo.org> :
1426 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still 1704 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1427 a work in progress. 1705 a work in progress.
1428 1706
1429 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1707 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1430 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD 1708 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1431 directly. GLISD can now handle data imported from XML. 1709 directly. GLISD can now handle data imported from XML.
1432 1710
1433 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1711 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1434 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to 1712 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1435 handle blank (no disklabel) disks. 1713 handle blank (no disklabel) disks.
1436 1714
1437 20 May 2005; Preston Cody <codeman@gentoo.org> 1715 20 May 2005; Preston Cody <codeman@gentoo.org> :
1438 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned 1716 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1439 up, documented, and separated out serialization and grouped all sections. 1717 up, documented, and separated out serialization and grouped all sections.
1440 1718
1441 19 May 2005; Preston Cody <codeman@gentoo.org> 1719 19 May 2005; Preston Cody <codeman@gentoo.org> :
1442 Reorganization of ClientConfiguration and gutting of unused functions. 1720 Reorganization of ClientConfiguration and gutting of unused functions.
1443 Removed verbose option from CC. Moved import statement in IP and CConfig up. 1721 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1444 1722
1445 18 May 2005; Preston Cody <codeman@gentoo.org> 1723 18 May 2005; Preston Cody <codeman@gentoo.org> :
1446 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup 1724 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1447 1725
1448 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1726 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1449 Fixed bug in finishing_cleanup(). Fix a late-night coding error in 1727 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1450 partitioning. CC serializes install profile to disk and prepare_chroot() 1728 partitioning. CC serializes install profile to disk and prepare_chroot()
1451 copies it into /mnt/gentoo/root 1729 copies it into /mnt/gentoo/root
1452 1730
1453 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1731 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1454 Moved URI parsing into new function parse_uri() 1732 Moved URI parsing into new function parse_uri()
1455 1733
1456 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1734 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1457 Added XMLParser module. 1735 Added XMLParser module.
1458 1736
1459 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1737 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1460 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI. 1738 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1461 Minor fix to is_uri() regex to allow hyphens in hostname. 1739 Minor fix to is_uri() regex to allow hyphens in hostname.
1462 1740
1463 12 May 2005; Preston Cody <codeman@gentoo.org> 1741 12 May 2005; Preston Cody <codeman@gentoo.org> :
1464 Updated finishing_cleanup for new unmounting method from agaffney. 1742 Updated finishing_cleanup for new unmounting method from agaffney.
1465 1743
1466 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1744 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1467 Fix GLILogger to use correct time format string. Fix _edit_config() to 1745 Fix GLILogger to use correct time format string. Fix _edit_config() to
1468 properly comment out variables. Fix minor bug in finishing_cleanup(). Add 1746 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1469 unicode support to is_realstring(). 1747 unicode support to is_realstring().
1470 1748
1471 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1749 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1472 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero 1750 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1473 return value instead of non-zero. Add code to output a traceback to the 1751 return value instead of non-zero. Add code to output a traceback to the
1474 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes 1752 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1475 instead of --nocolor. 1753 instead of --nocolor.
1476 1754
1477 10 May 2005; Preston Cody <codeman@gentoo.org> 1755 10 May 2005; Preston Cody <codeman@gentoo.org> :
1478 Added GLIGenDialog.py to make a generic class for the dialog functions that 1756 Added GLIGenDialog.py to make a generic class for the dialog functions that
1479 can be used by both dialogfe and the netfe/be. updated both for new filename. 1757 can be used by both dialogfe and the netfe/be. updated both for new filename.
1480 date changes. 2004->2005. 1758 date changes. 2004->2005.
1481 1759
1482 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1760 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1483 Removed 'quiet=True' from spawn() calls 1761 Removed 'quiet=True' from spawn() calls
1484 1762
1485 10 May 2005; Preston Cody <codeman@gentoo.org> 1763 10 May 2005; Preston Cody <codeman@gentoo.org> :
1486 Updated GLIUtility with patches from chotchki. Also added documentation 1764 Updated GLIUtility with patches from chotchki. Also added documentation
1487 1765
1488 9 May 2005; Preston Cody <codeman@gentoo.org> 1766 9 May 2005; Preston Cody <codeman@gentoo.org> :
1489 Added the function for set_etc_portage to ArchTemplate. no step for it yet. 1767 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1490 Updated _edit_config in ArchTemplate, make_config, and various other fixes 1768 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1491 from bug #89683, mostly touchups. 1769 from bug #89683, mostly touchups.
1492 1770
1493 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1771 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1494 GLIStorageDevice cleanup patch from bug #91761 1772 GLIStorageDevice cleanup patch from bug #91761
1495 1773
1496 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1774 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1497 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix 1775 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1498 _edit_config(). Error logging casts 'error' to str 1776 _edit_config(). Error logging casts 'error' to str
1499 1777
1500 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1778 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1501 Exceptions received in CC are logged before being passed to the FE. Added 1779 Exceptions received in CC are logged before being passed to the FE. Added
1502 code to CC to handle exceptions *not* thrown by the installer itself. 1780 code to CC to handle exceptions *not* thrown by the installer itself.
1503 1781
1504 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1782 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1505 get_max_mb_for_resize() returns -1 if not self.resizeable 1783 get_max_mb_for_resize() returns -1 if not self.resizeable
1506 1784
1507 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1785 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1508 More dirty rsync hacks :-/ 1786 More dirty rsync hacks :-/
1509 1787
1510 29 Apr 2005; Preston Cody <codeman@gentoo.org> 1788 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1511 Patches from chotchki (bug #90325) to improve CC networking. untested. 1789 Patches from chotchki (bug #90325) to improve CC networking. untested.
1512 1790
1513 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1791 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1514 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in 1792 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1515 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split 1793 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1516 'custom' sync option into 'none' and 'snapshot'. Minor fixes to 1794 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1517 GLIStorageDevice as suggested by pychecker. Fix minor bug in 1795 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1518 _get_packages_to_emerge(). Fix _quickpkg_deps() to call 1796 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1519 _get_packages_to_emerge() 1797 _get_packages_to_emerge()
1520 1798
1521 28 Apr 2005; Preston Cody <codeman@gentoo.org> 1799 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1522 Added group-adding code to set_users in ArchTemplate 1800 Added group-adding code to set_users in ArchTemplate
1523 1801
1524 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1802 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1525 Added post-install script code 1803 Added post-install script code
1526 1804
1527 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1805 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1528 Fixed encapsulation issues in GLIClientController (bug #90141) 1806 Fixed encapsulation issues in GLIClientController (bug #90141)
1529 1807
1530 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1808 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1531 Update resizing code in GLIStorageDevice 1809 Update resizing code in GLIStorageDevice
1532 1810
1533 17 Apr 2005; Preston Cody <codeman@gentoo.org> 1811 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1534 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger. 1812 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1535 1813
1536 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1814 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1537 Reverted change to ArchTemplate and added support for commented line in old 1815 Reverted change to ArchTemplate and added support for commented line in old
1538 code. 1816 code.
1539 1817
1540 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1818 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1541 Changed _edit_config() to modify value in-place instead of commenting out and 1819 Changed _edit_config() to modify value in-place instead of commenting out and
1542 adding the new value to the end of the file. 1820 adding the new value to the end of the file.
1543 1821
1544 15 Apr 2005; Preston Cody <codeman@gentoo.org> 1822 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1545 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration. 1823 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1546 Also updated TODO list. 1824 Also updated TODO list.
1547 1825
1548 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1826 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1549 Use blackace's one-liner to add comments for all function for use with 1827 Use blackace's one-liner to add comments for all function for use with
1550 pythondoc. 1828 pythondoc.
1551 1829
1552 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1830 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1553 Moved 'end >= device_sectors' check out of loop to check for next partition's 1831 Moved 'end >= device_sectors' check out of loop to check for next partition's
1554 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86. 1832 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1555 Partitioning code now tracks start/end of extended for placing logicals. End 1833 Partitioning code now tracks start/end of extended for placing logicals. End
1556 point of logical is now adjusted along with start. 1834 point of logical is now adjusted along with start.
1557 1835
1558 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1836 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1559 Finish overhaul of backend partitioning code. Fixed all bugs that stood in 1837 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1560 the way of partitioning from a blank disk. Add int() around access to minor 1838 the way of partitioning from a blank disk. Add int() around access to minor
1561 key in partition information due to new partition code leaving them as float. 1839 key in partition information due to new partition code leaving them as float.
1562 1840
1563 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1841 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1564 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code 1842 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1565 1843
1566 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1844 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1567 Major GLIStorageDevice overhaul...all MB now instead of sectors. 1845 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1568 1846
1569 8 Apr 2005; Scott Myron <samyron@gentoo.org> 1847 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1570 Added support for DHCP options and MAC addresses in the InstallProfile. 1848 Added support for DHCP options and MAC addresses in the InstallProfile.
1571 1849
1572 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1850 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1573 Changed mountopts check to work for blank and whitespace. Pipe emerge through 1851 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1574 sed to properly strip out junk. 1852 sed to properly strip out junk.
1575 1853
1576 2 Apr 2005; Preston Cody <codeman@gentoo.org> 1854 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1577 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel 1855 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1578 added --emptytree to stage2. fixed ethx not being added to runlevel defalt. 1856 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1579 1857
1580 31 Mar 2005; Preston Cody <codeman@gentoo.org> 1858 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1581 Fixed indent problem in GLICController 1859 Fixed indent problem in GLICController
1582 1860
1583 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1861 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1584 Check for disklabel type "loop" and use the device name without a minor. 1862 Check for disklabel type "loop" and use the device name without a minor.
1585 1863
1586 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1864 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1587 Remove /tmp/compile_output.log and /var/log/install.log when install is 1865 Remove /tmp/compile_output.log and /var/log/install.log when install is
1588 complete. Added code to (hopefully) keep 2nd thread running after install. 1866 complete. Added code to (hopefully) keep 2nd thread running after install.
1589 Patch from zahna for extra arguments to the kernel. Patch from zahna to add 1867 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1590 get_eth_info() function. Remove most of content in amd64ArchTemplate and 1868 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1591 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args 1869 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1592 1870
1593 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1871 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1594 Added 'append_log=True' to all spawn() calls using logfile=. Append to log 1872 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1595 when unpacking tarball. 1873 when unpacking tarball.
1596 1874
1597 28 Mar 2005; Preston Cody <codeman@gentoo.org> 1875 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1598 rewrote filesystem_tools. looks like it works so ripping out all the old 1876 rewrote filesystem_tools. looks like it works so ripping out all the old
1599 filesystem_tools code. 1877 filesystem_tools code.
1600 1878
1601 26 Mar 2005; Preston Cody <codeman@gentoo.org> 1879 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1602 Changed the print statements to logging in the partitioning BE code. 1880 Changed the print statements to logging in the partitioning BE code.
1603 the logger may need to be imported to the x86archtemplate. unknown yet. 1881 the logger may need to be imported to the x86archtemplate. unknown yet.
1604 Added the finishing_cleanup function. 1882 Added the finishing_cleanup function.
1605 added a fix to the logger from BenUrban 1883 added a fix to the logger from BenUrban
1606 1884
1607 25 Mar 2005; Preston Cody <codeman@gentoo.org> 1885 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1608 changed InstallProfile to remove is_uri check on kernel, stage, and portage 1886 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1609 URIs. The blank uri check has been commented out. 1887 URIs. The blank uri check has been commented out.
1610 ripped out error checking of set_services. this is done by _add_to_runlevel. 1888 ripped out error checking of set_services. this is done by _add_to_runlevel.
1611 1889
1612 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1890 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1613 set_stage_tarball_uri() doesn't raise an exception on a blank string. 1891 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1614 1892
1615 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1893 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1616 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1894 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1617 the install profile if available. Commented out spawn() debugging prints 1895 the install profile if available. Commented out spawn() debugging prints
1618 1896
1619 23 Mar 2005; Preston Cody <codeman@gentoo.org> 1897 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1620 small changes to setup_network_post. moved adding to runlevel of net.x to 1898 small changes to setup_network_post. moved adding to runlevel of net.x to
1621 after the device gets symlinked. added domainname runlevel command. 1899 after the device gets symlinked. added domainname runlevel command.
1622 1900
1623 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1901 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1624 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in 1902 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1625 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to 1903 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1626 spawn() call in livecd-kernel code to pass environment variables. 1904 spawn() call in livecd-kernel code to pass environment variables.
1627 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1905 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1628 the install profile if available. 1906 the install profile if available.
1629 1907
1630 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1908 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1631 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate 1909 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1632 to handle installing the livecd kernel into the new system. 1910 to handle installing the livecd kernel into the new system.
1633 1911
1634 22 Mar 2005; Preston Cody <codeman@gentoo.org> 1912 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1635 should emerge hotplug and coldplug before adding them to runlevel. 1913 should emerge hotplug and coldplug before adding them to runlevel.
1636 1914
1637 21 Mar 2005; Preston Cody <codeman@gentoo.org> 1915 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1638 took chroot out of grub_install command. 1916 took chroot out of grub_install command.
1639 1917
1640 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1918 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1641 Changed chroot wrapper code in spawn() to write the wrapper the python way 1919 Changed chroot wrapper code in spawn() to write the wrapper the python way
1642 instead of the bash way to avoid quote conflicts. Added 1920 instead of the bash way to avoid quote conflicts. Added
1643 'logfile=self._compile_logfile' to a number of spawn() calls. Added new 1921 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1644 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh' 1922 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1645 as it breaks the piping. 1923 as it breaks the piping.
1646 1924
1647 20 Mar 2005; Preston Cody <codeman@gentoo.org> 1925 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1648 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo. 1926 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1649 1927
1650 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1928 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1651 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in 1929 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1652 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and 1930 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1653 GLIInstallProfile. 1931 GLIInstallProfile.
1654 1932
1655 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1933 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1656 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs 1934 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1657 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved 1935 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1658 into /mnt/gentoo in prepare_chroot() 1936 into /mnt/gentoo in prepare_chroot()
1659 1937
1660 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1938 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1661 Add sigunmask.c contributed by d_m (on freenode) to counteract python's 1939 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1662 retarted behavior regarding threads and signals. Add code to convert MB/%/* 1940 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1663 to start/end sectors 1941 to start/end sectors
1664 1942
1665 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1943 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1666 Add 2>&1 to cmd in spawn() 1944 Add 2>&1 to cmd in spawn()
1667 1945
1668 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1946 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1669 Modified GLIUtility.exitsuccess() to work with return value from 1947 Modified GLIUtility.exitsuccess() to work with return value from
1670 commands.getstatusoutput instead of os.waitpid(). spawn() automatically 1948 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1671 creates wrapper script for commands run inside chroot so multiple commands 1949 creates wrapper script for commands run inside chroot so multiple commands
1672 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x' 1950 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1673 for the generated script from spawn() 1951 for the generated script from spawn()
1674 1952
1675 16 Mar 2005; Preston Cody <codeman@gentoo.org> 1953 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1676 Removed default values for stage tarball URI and portage tree URI from 1954 Removed default values for stage tarball URI and portage tree URI from
1677 InstallProfile. These should be set by the FEs. also added services step to 1955 InstallProfile. These should be set by the FEs. also added services step to
1678 ArchTemplate and coldplug/hotplug runlevels to the genkernel step. 1956 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1679 Possibly fixed CC DHCP bug with -n. (thx agaffney) 1957 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1680 1958
1681 14 Mar 2005; Preston Cody <codeman@gentoo.org> 1959 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1682 Small fix for setting the default gateway. Also added feature to dialogfe. 1960 Small fix for setting the default gateway. Also added feature to dialogfe.
1683 1961
1684 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1962 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1685 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid 1963 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1686 1964
1687 1 Mar 2005; Preston Cody <codeman@gentoo.org> 1965 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1688 Fixed a bunch of true -> True typos. lots of em 1966 Fixed a bunch of true -> True typos. lots of em
1689 only write new resolv.conf if there are dns servers listed. 1967 only write new resolv.conf if there are dns servers listed.
1690 1968
1691 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1969 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1692 Commented out 'display_on_tty8=True' in start_portmap() 1970 Commented out 'display_on_tty8=True' in start_portmap()
1693 1971
1694 18 Feb 2005; Preston Cody <codeman@gentoo.org> 1972 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1695 added progress bar to dialogfe and fix logger bug in ArchTemplate. 1973 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1696 1974
1697 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1975 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1698 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved 1976 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1699 lang parameter to __init__() 1977 lang parameter to __init__()
1700 1978
1701 10 Feb 2005; Preston Cody <codeman@gentoo.org> 1979 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1702 updates to TODO list. 1980 updates to TODO list.
1703 1981
1704 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1982 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1705 Initial code for quickpkg GRP support. Fix loop to grab packages from 1983 Initial code for quickpkg GRP support. Fix loop to grab packages from
1706 'emerge -p blah' 1984 'emerge -p blah'
1707 1985
1708 6 Feb 2005; Preston Cody <codeman@gentoo.org> 1986 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1709 check for dhcp in the network stuff and emerge it if it is. 1987 check for dhcp in the network stuff and emerge it if it is.
1710 added quickpkg to TODO list 1988 added quickpkg to TODO list
1711 1989
1712 5 Feb 2005; Preston Cody <codeman@gentoo.org> 1990 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1713 Changed the raising of 'warning' exceptions to a simple log of the error 1991 Changed the raising of 'warning' exceptions to a simple log of the error
1714 so that the installer can continue. 1992 so that the installer can continue.
1715 1993
1716 3 Feb 2005; Preston Cody <codeman@gentoo.org> 1994 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1717 Some big changes. First, changed most output to display_on_tty8. 1995 Some big changes. First, changed most output to display_on_tty8.
1718 Second, added log lines to all templates. Some smaller fixes such as typos. 1996 Second, added log lines to all templates. Some smaller fixes such as typos.
1719 Also did some cleanups of old commented lines. 1997 Also did some cleanups of old commented lines.
1720 1998
1721 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1999 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1722 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban. 2000 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1723 Undo change with fix. Escaping fix in GLIStorageDevice.py 2001 Undo change with fix. Escaping fix in GLIStorageDevice.py
1724 2002
1725 31 Jan 2005; Preston Cody <codeman@gentoo.org> 2003 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1726 more updates to TODO list. hopefully we'll soon start removing items instead 2004 more updates to TODO list. hopefully we'll soon start removing items instead
1727 of adding them. 2005 of adding them.
1728 2006
1729 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2007 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1730 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works 2008 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1731 2009
1732 27 Jan 2005; Preston Cody <codeman@gentoo.org> 2010 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1733 updated TODO list. (again) 2011 updated TODO list. (again)
1734 2012
1735 25 Jan 2005; Preston Cody <codeman@gentoo.org> 2013 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1736 changed output of portmap start to display_on_tty8. 2014 changed output of portmap start to display_on_tty8.
1737 fixed bootloader for udev and multiple kernels 2015 fixed bootloader for udev and multiple kernels
1738 fixed custom kernel config (again) 2016 fixed custom kernel config (again)
1739 2017
1740 22 Jan 2005; Preston Cody <codeman@gentoo.org> 2018 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1741 changed default value of CC._enable_ssh to True because this is smart. 2019 changed default value of CC._enable_ssh to True because this is smart.
1742 added code to allow custom kernel .config. may be unstable and break. sorry. 2020 added code to allow custom kernel .config. may be unstable and break. sorry.
1743 2021
1744 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2022 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1745 partition() now waits until after it checks for partition flags before delete 2023 partition() now waits until after it checks for partition flags before delete
1746 the partitions :P 2024 the partitions :P
1747 2025
1748 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2026 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1749 Updated TODO. swapon failure it temporarily not an error. swapon is an error 2027 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1750 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't 2028 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1751 blank. 2029 blank.
1752 2030
1753 19 Jan 2005; Preston Cody <codeman@gentoo.org> 2031 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1754 Various fixes related to the add_users function. Still not yet finished. 2032 Various fixes related to the add_users function. Still not yet finished.
1755 Added things to the TODO list. Lets start using that! 2033 Added things to the TODO list. Lets start using that!
1756 2034
1757 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2035 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1758 Added code to x86Template to format newly created partitions. Also added 2036 Added code to x86Template to format newly created partitions. Also added
1759 some error checking code. GLIStorageDevice passes 'minor' with data to 2037 some error checking code. GLIStorageDevice passes 'minor' with data to
1760 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS 2038 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1761 mounting code. 2039 mounting code.
1762 2040
1763 18 Jan 2005; Preston Cody <codeman@gentoo.org> 2041 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1764 Took out unnecessary setting of random livecd root password. the cd already 2042 Took out unnecessary setting of random livecd root password. the cd already
1765 sets it randomly. 2043 sets it randomly.
1766 2044
1767 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2045 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1768 Took out an unneeded step from CC's run() 2046 Took out an unneeded step from CC's run()
1769 2047
1770 15 Jan 2005; Preston Cody <codeman@gentoo.org> 2048 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1771 Attempt at detecting and adding windows partitions to lilo. 2049 Attempt at detecting and adding windows partitions to lilo.
1772 2050
1773 14 Jan 2005; Preston Cody <codeman@gentoo.org> 2051 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1774 Added lilo code and cleaned up lilo code. also do_partitioning renamed to 2052 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1775 partition. fixed misc exit_status => exitstatus typo. 2053 partition. fixed misc exit_status => exitstatus typo.
1776 2054
1777 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2055 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1778 Added basic code for resizing filesystems with pyparted. Fixed code for 2056 Added basic code for resizing filesystems with pyparted. Fixed code for
1779 resizing ntfs and ext2/3. 2057 resizing ntfs and ext2/3.
1780 2058
1781 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2059 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1782 Fixed partition() in x86Template so that it scans through logicals and deletes 2060 Fixed partition() in x86Template so that it scans through logicals and deletes
1783 before deleting containing extended partition. Also clears partition table to 2061 before deleting containing extended partition. Also clears partition table to
1784 be safe before third pass. 2062 be safe before third pass.
1785 2063
1786 08 Jan 2005; Preston Cody <codeman@gentoo.org> 2064 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1787 Added mount_network_shares. not able to test it from this computer. 2065 Added mount_network_shares. not able to test it from this computer.
1788 will test when i get back to school. 2066 will test when i get back to school.
1789 also added start_portmap to the client_controller as an always-do. 2067 also added start_portmap to the client_controller as an always-do.
1790 agaffney says this is needed for NFS mounts to work. 2068 agaffney says this is needed for NFS mounts to work.
1791 2069
1792 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2070 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1793 Partial rewrite of partitioning code in x86Template. No longer shells out to 2071 Partial rewrite of partitioning code in x86Template. No longer shells out to
1794 parted to perform actions, now uses all pyparted calls. Code "works" in a 2072 parted to perform actions, now uses all pyparted calls. Code "works" in a
1795 test, but still needs lots of TLC. Also modified tests/install.py to work 2073 test, but still needs lots of TLC. Also modified tests/install.py to work
1796 with x86Template and GLIClientConfiguration. 2074 with x86Template and GLIClientConfiguration.
1797 2075
1798 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2076 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1799 Initial move of partitioning code from ArchTemplate to x86Template. 2077 Initial move of partitioning code from ArchTemplate to x86Template.
1800 2078
1801 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2079 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1802 Added grp_install and services to InstallProfile. forgot about the set_root_password 2080 Added grp_install and services to InstallProfile. forgot about the set_root_password
1803 2081
1804 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2082 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1805 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney. 2083 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1806 Test Install ran very well (skipping partitioning). 2084 agaffney. Test Install ran very well (skipping partitioning).
1807 2085
1808 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2086 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1809 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot 2087 My mid-day update. rewrote mount_local_partitions for order of mounting.
1810 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs. 2088 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1811 some may still have eluded me. 2089 partition format. fixed a few _edit_configs. some may still have eluded me.
1812 2090
1813 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2091 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1814 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it. 2092 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
2093 to test it.
1815 Just finished mount_local_partitions in GLIArchitectureTemplate 2094 Just finished mount_local_partitions in GLIArchitectureTemplate
1816 2095
1817 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2096 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1818 Added get_num_sectors() to GLIStorageDevice. 2097 Added get_num_sectors() to GLIStorageDevice.
1819 2098
1820 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2099 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1821 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders. 2100 GLIStorageDevice now tracks partition boundaries in sectors instead of
2101 cylinders.
1822 Also now ignores <=100 sectors for free space. Removed remaining depends stuff 2102 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1823 from GLIInstallProfile. 2103 from GLIInstallProfile.
1824 2104
1825 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2105 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1826 GLIStorageDevice returns "unknown" instead of "" for get_type() 2106 GLIStorageDevice returns "unknown" instead of "" for get_type()
1827 2107
1828 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2108 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1829 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to 2109 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1830 actually work. Commented out resizability checking code for speed. 2110 actually work. Commented out resizability checking code for speed.
1831 2111
1832 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2112 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1833 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in 2113 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1834 GLIStorageDevice at the suggestion of plors 2114 in GLIStorageDevice at the suggestion of plors
1835 2115
1836 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2116 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1837 Added a function to GLIUtility to pull a value from a make.conf-style config 2117 Added a function to GLIUtility to pull a value from a make.conf-style config
1838 file. Minor type fix to GLIInstallProfile.py 2118 file. Minor type fix to GLIInstallProfile.py
1839 2119
1840 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2120 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1841 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated 2121 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1842 network mounts from partition data structure in GLIInstallProfile 2122 Separated network mounts from partition data structure in GLIInstallProfile
1843 2123
1844 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> 2124 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1845 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem 2125 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1846 can be resized. 2126 can be resized.
1847 2127
1848 27 Oct 2004; Preston Cody <codeman@gentoo.org> 2128 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1849 Added some of the final functions to GLIInstallTemplate. 2129 Added some of the final functions to GLIInstallTemplate.
1850 Yes this project is still active despite rare use of the Changelog! 2130 Yes this project is still active despite rare use of the Changelog!
1851 2131
1852 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2132 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1853 Added the GLIPartitionTools.py file. This is a temporary insertion of 2133 Added the GLIPartitionTools.py file. This is a temporary insertion of
1854 partitioning tools that will eventually go into their own package. 2134 partitioning tools that will eventually go into their own package.
1855 2135
1856 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2136 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1857 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time 2137 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1858 for the program). Added __init__(install_profile, client_configuration) to 2138 run-time for the program). Added __init__(install_profile,
1859 GLI.InstallProfile. This sets install_profile and client_configuration once so as 2139 client_configuration) to GLI.InstallProfile. This sets install_profile and
1860 to avoid constantly passing stuff every time we call a method. 2140 client_configuration once so as to avoid constantly passing stuff every time
2141 we call a method.
1861 2142
1862 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2143 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1863 2144
1864 Added another private method to GLI.InstallTemplate. _edit_config() modifies config 2145 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1865 files without messing up all the other stuff in them. This will be used for making 2146 config files without messing up all the other stuff in them. This will be
1866 changes to make.conf, rc.conf, /etc/conf.d/net, etc... 2147 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1867 2148
1868 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2149 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1869 2150
1870 Added GLI.InstallTemplate framework. This is not yet functional. However, it does 2151 Added GLI.InstallTemplate framework. This is not yet functional. However,
1871 have a few basic things. I added two private methods. One is _depends(). This 2152 it does have a few basic things. I added two private methods. One is
1872 will be used for dependency checking (ie. unpacking a tarball requires that 2153 _depends(). This will be used for dependency checking (ie. unpacking a
1873 partitioning has been done). The other is _exec_in_chroot(). This is the exact 2154 tarball requires that partitioning has been done). The other is
1874 same syntax as os.system(), however, instead of being run in the liveCD 2155 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1875 environment, it runs in the chroot. This requires a bit of fork() magic, so I 2156 instead of being run in the liveCD environment, it runs in the chroot. This
1876 isolated the code. Hope to work more this week to get this class formed... 2157 requires a bit of fork() magic, so I isolated the code. Hope to work more
2158 this week to get this class formed...
1877 2159
1878 14 Feb 2004; Eric Sammer <esammer@gentoo.org> 2160 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1879
1880 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for 2161 Added SAX parsing. Made GLI.InstallProfile a subclass of
1881 obvious reasons. Switched kernel_modules and users to be lists instead of tuples 2162 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1882 to allow for easier modification (mutable, rather than immutable objects). Updated 2163 to be lists instead of tuples to allow for easier modification (mutable,
1883 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse(). 2164 rather than immutable objects). Updated existing pydoc and added more.
2165 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1884 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references. 2166 GLI.py a bit. Fixed all accessors to use self references.
1885 Added initial unit test code. 2167 Added initial unit test code.
1886 2168
1887 9 Feb 2004; Eric Sammer <esammer@gentoo.org> 2169 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1888
1889 Added initial changelog. Setting up the basic structure of the CVS repository 2170 Added initial changelog. Setting up the basic structure of the CVS repository
1890 for the project. Added the UML class diagram in docs. Added a skeletal GLI 2171 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1891 python module. Added misc files such news, authors, etc. 2172 python module. Added misc files such news, authors, etc.

Legend:
Removed from v.1470  
changed lines
  Added in v.1892

  ViewVC Help
Powered by ViewVC 1.1.20