/[gli]/trunk/ChangeLog
Gentoo

Diff of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1470 Revision 1893
1# ChangeLog for Gentoo Linux Installer 1# ChangeLog for Gentoo Linux Installer
2# Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2 2# Copyright 2005-2008 Gentoo Foundation; Distributed under the GPL v2
3# $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.657 2006/06/25 22:24:28 codeman Exp $ 3# $Id: $
4
5 07 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
6 src/fe/gtk/ProgressDialog.py:
7 Truncate progress bar status text at 80 characters
8
9 06 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
10 src/GLIArchitectureTemplate.py:
11 Add checking for non-blank local filesystems after mounting
12
13 06 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
14 src/GLIArchitectureTemplate.py:
15 Update post-install networking config to use newer conf.d/net syntax
16
17 05 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
18 src/GLIArchitectureTemplate.py:
19 run sed on copied make.conf to remove lines that start with ##
20
21 04 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/Partitioning.py:
22 Modify order of extended check in partitioning code so that it works
23
24 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
25 sync dynamic-stage3 code in GLIPortage with GLIArch
26
27 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
28 src/GLIArchitectureTemplate.py:
29 Create /dev/tty1 with dynamic stage3
30
31 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org>
32 src/GLIArchitectureTemplate.py, src/GLIPortage.py,
33 src/fe/dialog/gli-dialog.py:
34 Switch to running vdb_to_fake_binrepo.py instead of reading systempkgs.txt
35 remove all references to systempkgs.txt
36
37 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org> -src/runtimedeps.py,
38 +src/vdb_to_fake_binrepo.py:
39 Add vdb_to_fake_binrepo.py script from the always awesome zmedico
40
41 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
42 force livecd and bindist USE
43
44 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org>
45 src/GLIArchitectureTemplate.py:
46 add in metadata_overlay for faster dep calculation
47
48 26 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
49 src/fe/gtk/ExtraPackages.py:
50 comment out kernelpkgs stuff in gtkfe
51
52 25 Nov 2007; Preston Cody <codeman@gentoo.org>
53 src/fe/dialog/gli-dialog.py:
54 adding commmand-line option for advanced mode which allows full functionality.
55
56 18 Nov 2007; Preston Cody <codeman@gentoo.org>
57 src/fe/dialog/gli-dialog.py:
58 attempting to throw in kernpkgs support. will see how this goes.
59
60 18 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
61 src/fe/gtk/OtherSettings.py:
62 pre-create conf.d/xdm
63
64 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIUtility.py:
65 use proper file name for kernel packages
66
67 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
68 src/fe/gtk/Networking.py:
69 s/install_logger/install_logging_daemon/
70
71 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
72 src/fe/gtk/LocalMounts.py:
73 import GLIUtility
74
75 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/fe/gtk/gtkfe.py:
76 start with Partitioning screen
77
78 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
79 src/fe/gtk/ExtraPackages.py, src/fe/gtk/LocalMounts.py,
80 src/fe/gtk/Networking.py, src/fe/gtk/OtherSettings.py,
81 src/fe/gtk/RootPass.py, src/fe/gtk/Timezone.py, src/fe/gtk/gtkfe.py:
82 rearrange a bit of code for gtkfe networkless-only transition
83
84 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
85 src/GLIUtility:
86 add get_kernpkgs_from_cd() function
87
88 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
89 src/GLIInstallProfile.py:
90 add xdm, gdm, and kdm to package list
91
92 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
93 src/fe/dialog/gli-dialog.py:
94 modify root mountpoint check in gli-dialog to use a for/else and notify the
95 user why they're not being allowed to leave the screen
96
97 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
98 src/templates/x86ArchitectureTemplate.py:
99 move around parentheses to fix bug 179528
100
101 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
102 src/fe/gtk/InstallFailed.py:
103 correct bugzilla location for bug 178144
104
105 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
106 src/GLIArchitectureTemplate.py, src/fe/gtk/gtkfe.py:
107 fix error in debug mode for bug 178475
108 force install_type to networkless for gtkfe
109
110 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
111 src/GLIArchitectureTemplate.py:
112 set TIMEZONE in /etc/conf.d/clock for bug 158882
113
114 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
115 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
116 src/fe/gtk/InstallFailed.py, src/fe/gtk/gtkfe.py:
117 make install log location consistent throughout code
118 'View Log' button in gtkfe now looks for active and failed log
119
120 04 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org>
121 src/GLIInstallProfile.py:
122 Added x11-themes/gentoo-artwork-livecd to the list of extra packages.
123
124 04 Jan 2007; Preston Cody <codeman@gentoo.org>
125 ClientController:
126 took out the preinstall steps. these will now be handled by the frontends.
127 The actual code for the steps can be put in GLIUtility if necessary.
128 IP:
129 Took out partitioning. Added mounts.
130 Moved root mount point over from CF
131 Removed RP-PPPoE. was never used.
132 AT:
133 reordered functions. removed references to the client-config
134 fixed fstab and other locations that used mountpoints to use the new mounts.
135 removed unused rc.conf function.
136 other smaller touchups.
137 gli-dialog:
138 install_profile() to self._install_profile
139 fix reference to arch instaed of self._arch
140 x86AT:
141 fixed code to use mounts instead of partitioning.
142
143 01 Jan 2007; Preston Cody <codeman@gentoo.org>
144 fixing all instances of WINDOWSKEYS to WINDOWKEYS
145 added space in AT debug line.
146 more general updates in an effort to get the code functional
147
148 29 Oct 2006; Preston Cody <codeman@gentoo.org>
149 gli-dialog:
150 more rearranging of code. Tossed the review menu and not calling show_settings
151 not sure how those are going to turn out just yet.
152
153 22 Oct 2006; Andrew Gaffney <agaffney@gentoo.org>
154 src/Partitioning.py:
155 first round of refactoring for Partitioning.py (was GLISD)
156
157 22 Oct 2006; Preston Cody <codeman@gentoo.org>
158 gli-dialog:
159 added in the rest of the code from GLIGenDialog.
160 will start picking at it now.
161 moved the early questions such as advanced_mode/networkless
162 into functions in the GLIDialog class.
163
164 21 Oct 2006; Preston Cody <codeman@gentoo.org>
165 ClientController and gli-dialog and GLIGenDialog:
166 removing GenDialog, this code will be put into gli-dialog
167 moving some ClientController code into gli-dialog as well.
168 this is only the beginning :)
169
170#------------------------------------------
171# GLI SWITCHES TO SVN.
172
173 15 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
174 src/GLIArchitectureTemplate.py:
175 use _wait_for_device_node() any place we were looping and checking before
176
177 13 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
178 src/GLIArchitectureTemplate.py:
179 add _wait_for_device_node()
180 src/GLIPortage.py:
181 raise an exception in get_deps() if pkglist is empty
182 -k option to install livecd-kernel to shut up wolf31o2 :P
183
184 11 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
185 src/GLIArchitectureTemplate.py:
186 break after installing 1 mta in install_mta()
187
188 10 Sep 2006; Preston Cody <codeman@gentoo.org>
189 src/GLIGenDialog.py:
190 rewrote how the USE flags work so that they are written correctly in relation
191 to the system's USE flags.
192 added a while condition on setting a user password
193 src/GLIArchitectureTemplate.py:
194 adding a self._mounted_devices to keep track of mounted partitions.
195 When cleaning up, only unmount these partitions. Not yet tested.
196
197 10 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
198 src/GLIStorageDevice.py:
199 properly identify apple_bootstrap partitions
200
201 9 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
202 src/GLIStorageDevice.py:
203 pay attention to 'ignoredparts' when reading partition table
204
205 3 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
206 src/GLIArchitectureTemplate.py:
207 force conversion of 'mb' to long
208
209 2 Sep 2006; Preston Cody <codeman@gentoo.org>
210 Lots of internationalization fixes. Point to a translation path called
211 languages in the dialog directory. Generated and added .pot files.
212 Added gettext to GLIIP for package descriptions.
213
214 01 Sep 2006; Chris Gianelloni <wolf31o2@gentoo.org>
215 src/GLIInstallProfile.py:
216 Added some more applications to the Extra Packages list.
217
218 1 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
219 src/templates/ppcArchitectureTemplate.py:
220 this doesn't need to inherit from x86AT or create an infinite loop by calling
221 its own __init__()
222 src/GLIArchitectureTemplate.py,src/templates/x86ArchitectureTemplate.py:
223 move partitioning code to GLIAT
224
225 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
226 src/GLIArchitectureTemplate.py:
227 pass quotes_around_value=False when adding default route to conf.d/net
228
229 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
230 src/GLIArchitectureTemplate.py:
231 copy backup custom.conf from livecd if present
232
233*GLI-0.4 (31 Jul 2006)
234
235 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
236 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
237 doing the testing and coming up with the patch.
238
239 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
240 src/GLIArchitectureTemplate.py:
241 skip blank entries/files in update_config_files()
242
243 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
244 src/templates/x86ArchitectureTemplate.py:
245 move logical clipping logic a bit
246
247 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
248 I've commented out most of the code that used launch. It wasn't working and
249 we don't have the time to fix it before the release. I'll look into it after
250 the release and make it more robust and flexible.
251
252 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
253 src/templates/x86ArchitectureTemplate.py:
254 clip logical partition at end of extended
255
256 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
257 src/GLIInstallProfile.py:
258 Added a few more applications to the list of extra packages to be merged,
259 all from various GRP sets.
260
261 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
262 Added launch variable to the end of each try-run with auth, which should
263 cause this to function properly. Of course, more testing is needed.
264
265 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
266 Fix a missed space in the installer script.
267
268 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
269 src/GLIClientConfiguration.py:
270 adding 'None' with capital N so that the frontends can parse the network type
271
272 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
273 src/GLIClientController.py:
274 log version-stamp
275
276 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
277 Updated the installer script to allow specifying the front-end to run from
278 the command line. Currently, it only supports dialog and gtk. It still needs
279 some testing, however.
280
281 9 July 2006; Preston Cody <codeman@gentoo.org>
282 src/GLIGenDialog.py:
283 make lilo only show up for x86 if non-networkless
4 284
5 25 Jun 2006; Preston Cody <codeman@gentoo.org> 285 25 Jun 2006; Preston Cody <codeman@gentoo.org>
6 src/GLIGenDialog.py 286 src/GLIGenDialog.py:
7 adding code to auto-add doscsi if a scsi drive detected. 287 adding code to auto-add doscsi if a scsi drive detected.
8 this code is also in the gtkfe already 288 this code is also in the gtkfe already
9 289
10 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org> 290 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
11 src/GLIPortage.py: 291 src/GLIPortage.py:
13 293
14 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org> 294 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
15 src/GLIUtility.py: 295 src/GLIUtility.py:
16 fix list_mirrors() to ignore <uri> lines that don't end on the same line 296 fix list_mirrors() to ignore <uri> lines that don't end on the same line
17 297
18 17 Jun 2006; Preston Cody <codeman@gentoo.org> 298 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
19 Added code to the mta step in AT to parse the install packages list and 299 Added code to the mta step in AT to parse the install packages list and
20 look for mtas and if it finds it emerge it. 300 look for mtas and if it finds it emerge it.
21 Initial attempt at moving extra_packages early in the setup to only show 301 Initial attempt at moving extra_packages early in the setup to only show
22 local USE flags relating to those packages. 302 local USE flags relating to those packages.
23 .. abandoned local USE project. no right way to do it. 303 .. abandoned local USE project. no right way to do it.
46 call reorder_minors() from tidy_partitions() instead of 326 call reorder_minors() from tidy_partitions() instead of
47 set_partitions_from_disk() 327 set_partitions_from_disk()
48 add code to reorder_minors() to take extended/logical into consideration with 328 add code to reorder_minors() to take extended/logical into consideration with
49 non-free partitions 329 non-free partitions
50 330
51 30 Apr 2006; Preston Cody <codeman@gentoo.org> 331 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
52 added a check of the length of the directory in /usr/src if under 6 characters 332 added a check of the length of the directory in /usr/src if under 6 characters
53 should fix bug 131809 333 should fix bug 131809
54 334
55 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 335 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
56 src/GLIArchitectureTemplate.py: 336 src/GLIArchitectureTemplate.py:
63 343
64 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 344 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
65 src/GLIInstallProfile.py: 345 src/GLIInstallProfile.py:
66 change kernel-modules to not be so stupid 346 change kernel-modules to not be so stupid
67 347
68 9 Apr 2006; Preston Cody <codeman@gentoo.org> 348 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
69 GLIMD: fix display problem with execute.pyhtml. 349 GLIMD: fix display problem with execute.pyhtml.
70 make tables better. 350 make tables better.
71 351
72 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 352 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
73 src/GLIInstallProfile.py: 353 src/GLIInstallProfile.py:
75 src/templates/x86ArchitectureTemplate.py: 355 src/templates/x86ArchitectureTemplate.py:
76 save/restore partition name 356 save/restore partition name
77 src/GLIStorageDevice.py: 357 src/GLIStorageDevice.py:
78 support for partition name 358 support for partition name
79 359
80 8 Apr 2006; Preston Cody <codeman@gentoo.org> 360 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
81 touchups to add_profile in GLIMD to link to webgli 361 touchups to add_profile in GLIMD to link to webgli
82 add a save to GLIMD profile button in webgli's saveprofile 362 add a save to GLIMD profile button in webgli's saveprofile
83 gliserv.py: 363 gliserv.py:
84 initial attempt at custom networking info per client. hostname support only. 364 initial attempt at custom networking info per client. hostname support only.
85 365
86 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 366 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
87 src/net/server/html/webgli/partitioning[234].pyhtml: 367 src/net/server/html/webgli/partitioning[234].pyhtml:
88 small fixes for new partioning code 368 small fixes for new partioning code
89 369
90 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> 370 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
91 src/GLIClientController.py: 371 src/GLIClientController.py:
156 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org> 436 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
157 src/GLIStorageDevice.py: 437 src/GLIStorageDevice.py:
158 raise an exception if the existing partitions are out of disk order 438 raise an exception if the existing partitions are out of disk order
159 look for minors out of order instead of disk position 439 look for minors out of order instead of disk position
160 440
161 8 Mar 2006; Preston Cody <codeman@gentoo.org> 441 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
162 src/fe/dialog/gli-dialog and src/GLIGenDialog: 442 src/fe/dialog/gli-dialog and src/GLIGenDialog:
163 added networkless mode to gli-dialog. 443 added networkless mode to gli-dialog.
164 444
165 6 Mar 2006; Preston Cody <codeman@gentoo.org> 445 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
166 src/templates/x86AT: 446 src/templates/x86AT:
167 add windows detection code for grub. untested. 447 add windows detection code for grub. untested.
168 448
169 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org> 449 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/templates/x86ArchitectureTemplate.py: 450 src/templates/x86ArchitectureTemplate.py:
175 return start/end with ip structure 455 return start/end with ip structure
176 pad min ntfs size by 50 MB just to be safe 456 pad min ntfs size by 50 MB just to be safe
177 src/GLIArchitectureTemplate.py: 457 src/GLIArchitectureTemplate.py:
178 only install filesystem tools for partitions with a mountpoint 458 only install filesystem tools for partitions with a mountpoint
179 459
180 5 Mar 2006; Preston Cody <codeman@gentoo.org> 460 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
181 add error catching and text to saving profile dialogs 461 add error catching and text to saving profile dialogs
182 462
183 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org> 463 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIPortage.py: 464 src/GLIPortage.py:
185 create /tmp, /var/tmp, and /var/lib/portage with proper permissions 465 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
204 check to make sure start sector for primary isn't less than end sector for 484 check to make sure start sector for primary isn't less than end sector for
205 previous extended 485 previous extended
206 src/GLIClientController.py: 486 src/GLIClientController.py:
207 write dns servers to /etc/resolv.conf 487 write dns servers to /etc/resolv.conf
208 488
209 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 489 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
210 src/GLIPortage.py: 490 src/GLIPortage.py:
211 copy_pkg_to_chroot() uses compile_output.log for command output 491 copy_pkg_to_chroot() uses compile_output.log for command output
212 492
213 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 493 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
214 only keep a 1000 line 'scrollback' buffer for the compile output and log file 494 only keep a 1000 line 'scrollback' buffer for the compile output and log file
215 495
216 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 496 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
217 src/GLIPortage.py: 497 src/GLIPortage.py:
218 add code make GLIPortage.py capable of being run stand-along for dynamic 498 add code make GLIPortage.py capable of being run stand-along for dynamic
219 stage3 generation and copying packages in a GRP-ish way 499 stage3 generation and copying packages in a GRP-ish way
220 grp code fixups 500 grp code fixups
221 501
222 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 502 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
223 src/GLIPortage.py: 503 src/GLIPortage.py:
224 ignore blank packages passed to get_deps() and emerge() 504 ignore blank packages passed to get_deps() and emerge()
225 505
226 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 506 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
227 src/GLIUtility.py: 507 src/GLIUtility.py:
228 add get_chosts() function 508 add get_chosts() function
229 509
230*GLI-0.3 (12 Feb 2006) 510*GLI-0.3 (12 Feb 2006)
231 511
232 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 512 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
233 src/templates/x86ArchitectureTemplate.py: 513 src/templates/x86ArchitectureTemplate.py:
234 pull old start/end sector values from somewhere that actually has them 514 pull old start/end sector values from somewhere that actually has them
235 add logic for extended partition to code that makes sure new end sector 515 add logic for extended partition to code that makes sure new end sector
236 doesn't overlap start sector of next partitions 516 doesn't overlap start sector of next partitions
237 don't freak out if partition can't be deleted 517 don't freak out if partition can't be deleted
238 518
239 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 519 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
240 src/GLIPortage.py: 520 src/GLIPortage.py:
241 run env-update at the end of copy_pkg_to_chroot() 521 run env-update at the end of copy_pkg_to_chroot()
242 522
243 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 523 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
244 src/templates/x86ArchitectureTemplate.py: 524 src/templates/x86ArchitectureTemplate.py:
245 I'm a complete fscking dumbass. I recorded the end sector for partitions that 525 I'm a complete fscking dumbass. I recorded the end sector for partitions that
246 weren't being touched, but I never used it when recreating them...the end was 526 weren't being touched, but I never used it when recreating them...the end was
247 calculated from the size in MB instead :/ 527 calculated from the size in MB instead :/
248 528
249 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 529 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
250 src/GLIArchitectureTemplate.py: 530 src/GLIArchitectureTemplate.py:
251 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd 531 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
252 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo' 532 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
253 src/GLIPortage.py: 533 src/GLIPortage.py:
254 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a' 534 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
255 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py: 535 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
256 'resized' flag 536 'resized' flag
257 537
258 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 538 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
259 src/GLIPortage.py: 539 src/GLIPortage.py:
260 short circuit and check vdb directly if package begins with '=' 540 short circuit and check vdb directly if package begins with '='
261 541
262 8 Feb 2006; Preston Cody <codeman@gentoo.org> 542 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
263 added more packages to extra_packages list in IP 543 added more packages to extra_packages list in IP
264 544
265 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 545 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
266 src/templates/x86ArchitectureTemplate.py: 546 src/templates/x86ArchitectureTemplate.py:
267 10 tries to create filesystem instead of 3 547 10 tries to create filesystem instead of 3
268 src/GLIPortage, src/GLIArchitectureTemplate.py: 548 src/GLIPortage, src/GLIArchitectureTemplate.py:
269 ignore_missing flag for copy_pkg_to_chroot() 549 ignore_missing flag for copy_pkg_to_chroot()
270 550
271 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> 551 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
272 src/GLIPortage.py: 552 src/GLIPortage.py:
273 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs 553 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
274 554
275 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 555 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
276 src/net/server/gliserv.py: 556 src/net/server/gliserv.py:
277 fix handling of 404 for real files 557 fix handling of 404 for real files
278 src/net/server/GLIServerProfile.py: 558 src/net/server/GLIServerProfile.py:
279 look for 'hostname' in attributes instead of 'name' 559 look for 'hostname' in attributes instead of 'name'
280 560
281 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 561 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
282 src/SimpleXMLParser.py: 562 src/SimpleXMLParser.py:
283 initial support for 'include' in XML files 563 initial support for 'include' in XML files
284 src/GLIStorageDevice.py: 564 src/GLIStorageDevice.py:
285 initial support for % 565 initial support for %
286 src/GLIClientController.py: 566 src/GLIClientController.py:
287 add debugging statements to pre-install steps 567 add debugging statements to pre-install steps
288 568
289 15 Jan 2006; Preston Cody <codeman@gentoo.org> 569 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
290 webgli/configfiles: 570 webgli/configfiles:
291 check for key in etc_files['rc.conf'] to fix key error 571 check for key in etc_files['rc.conf'] to fix key error
292 webgli/timezone: small fix. 572 webgli/timezone: small fix.
293 webgli/extrapackages: list-type fix 573 webgli/extrapackages: list-type fix
294 webgli/services: same 574 webgli/services: same
295 glimd: add/edit_client updates. 575 glimd: add/edit_client updates.
296 576
297 12 Jan 2006; Preston Cody <codeman@gentoo.org> 577 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
298 added configure.pyhtml to glimd. minor changes 578 added configure.pyhtml to glimd. minor changes
299 to top and add_client. fixed up showargs. 579 to top and add_client. fixed up showargs.
300 added execute.pyhtml 580 added execute.pyhtml
301 changed register clients line in gliserv for name->hostname. 581 changed register clients line in gliserv for name->hostname.
302 updated TODO. 582 updated TODO.
303 583
304 10 Jan 2006; Preston Cody <codeman@gentoo.org> 584 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
305 src/net/server/*: 585 src/net/server/*:
306 added add/del/edit client/profile.pythml for glimd. 586 added add/del/edit client/profile.pythml for glimd.
307 updated templates, showclients, and gliserv. 587 updated templates, showclients, and gliserv.
308 588
309 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 589 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
310 src/net/server/*: 590 src/net/server/*:
311 stupid threading module... 591 stupid threading module...
312 592
313 8 Jan 2006; Preston Cody <codeman@gentoo.org> 593 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
314 AT: rc.conf -> conf.d/clock 594 AT: rc.conf -> conf.d/clock
315 595
316 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 596 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
317 src/GLIPortage.py: 597 src/GLIPortage.py:
318 show 'Calculating dependencies for ...' in subprogress bar at beginning of 598 show 'Calculating dependencies for ...' in subprogress bar at beginning of
319 emerge() 599 emerge()
320 src/GLIArchitectureTemplate.py: 600 src/GLIArchitectureTemplate.py:
321 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists 601 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
328 use lower-level os.read() instead of file.read() because python sucks 608 use lower-level os.read() instead of file.read() because python sucks
329 src/templates/x86ArchitectureTemplate.py: 609 src/templates/x86ArchitectureTemplate.py:
330 basic subprogress reporting for partitioning 610 basic subprogress reporting for partitioning
331 total_steps was 1 too high 611 total_steps was 1 too high
332 612
333 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 613 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
334 src/GLIUtility.py: 614 src/GLIUtility.py:
335 move parse_vdb_contents() to GLIPortage 615 move parse_vdb_contents() to GLIPortage
336 src/GLIPortage.py: 616 src/GLIPortage.py:
337 remove all symlink fixups 617 remove all symlink fixups
338 ignore 'dir' entries in CONTENTS 618 ignore 'dir' entries in CONTENTS
339 call tar with -p 619 call tar with -p
340 620
341 5 Jan 2006; Preston Cody <codeman@gentoo.org> 621 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
342 AT: bootsplash is now gensplash 622 AT: bootsplash is now gensplash
343 gliserv: add advanced_mode to shared_info 623 gliserv: add advanced_mode to shared_info
344 webgli: Added advanced mode. mostly just disables a few screens. 624 webgli: Added advanced mode. mostly just disables a few screens.
345 625
346 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> 626 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
347 src/GLIPortage.py: 627 src/GLIPortage.py:
348 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb 628 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
349 added emerge() 629 added emerge()
350 update sub-progress after each package is emerged 630 update sub-progress after each package is emerged
351 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS 631 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
355 install_packages() now calls emerge() in GLIPortage 635 install_packages() now calls emerge() in GLIPortage
356 change all calls to self._emerge() to self._portage.emerge() 636 change all calls to self._emerge() to self._portage.emerge()
357 comment out all emerge status checking...using exceptions now 637 comment out all emerge status checking...using exceptions now
358 call copy_pkg_to_chroot() directly for livecd-kernel 638 call copy_pkg_to_chroot() directly for livecd-kernel
359 639
360 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 640 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
361 src/GLIArchitectureTemplate.py: 641 src/GLIArchitectureTemplate.py:
362 remove add_pkg_to_world() and copy_pkg_to_chroot() 642 remove add_pkg_to_world() and copy_pkg_to_chroot()
363 copy installer.log to installer.log.failed on install failure 643 copy installer.log to installer.log.failed on install failure
364 src/GLIUtility.py: 644 src/GLIUtility.py:
365 added get_keymaps() 645 added get_keymaps()
367 src/GLIPortage.py: 647 src/GLIPortage.py:
368 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False 648 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
369 change copy_pkg_to_chroot() to work properly with use_root=False 649 change copy_pkg_to_chroot() to work properly with use_root=False
370 figure PORTAGE_TMPDIR properly 650 figure PORTAGE_TMPDIR properly
371 651
372 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 652 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
373 src/net/server/html/*: 653 src/net/server/html/*:
374 converted showclients, load/saveprofile 654 converted showclients, load/saveprofile
375 655
376 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 656 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
377 src/GLIPortage.py: 657 src/GLIPortage.py:
378 exclude packages already in chroot vdb from binary deplist 658 exclude packages already in chroot vdb from binary deplist
379 chroot to use best_version for chroot's vdb 659 chroot to use best_version for chroot's vdb
380 src/runtimedeps.py: 660 src/runtimedeps.py:
381 accept ROOT via commandline instead of env 661 accept ROOT via commandline instead of env
382 662
383 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 663 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
384 src/runtimedeps.py: 664 src/runtimedeps.py:
385 remove passing of ROOT 665 remove passing of ROOT
386 src/GLIPortage.py: 666 src/GLIPortage.py:
387 modify get_deps() to get deptree for each package and merge into final list 667 modify get_deps() to get deptree for each package and merge into final list
388 remove depgraph class 668 remove depgraph class
389 add debugging code to get_deps() 669 add debugging code to get_deps()
390 src/GLIArchitectureTemplate.py: 670 src/GLIArchitectureTemplate.py:
391 combine code for GRP/compile in install_packages() into one block 671 combine code for GRP/compile in install_packages() into one block
392 debugging code in install_packages() 672 debugging code in install_packages()
393 673
394 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 674 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
395 src/runtimedeps.py: 675 src/runtimedeps.py:
396 initial commit 676 initial commit
397 src/GLIPortage.py: 677 src/GLIPortage.py:
398 use separate script for GRP deps 678 use separate script for GRP deps
399 remove calls to portage module 679 remove calls to portage module
400 680
401 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 681 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
402 src/GLIPortage.py: 682 src/GLIPortage.py:
403 initial commit 683 initial commit
404 move some of portage function from GLIAT 684 move some of portage function from GLIAT
405 flipped around a few function args 685 flipped around a few function args
406 src/GLIArchitectureTemplate.py: 686 src/GLIArchitectureTemplate.py:
407 revamp install_packages() for new GLIPortage 687 revamp install_packages() for new GLIPortage
408 688
409 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 689 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
410 src/GLIArchitectureTemplate.py: 690 src/GLIArchitectureTemplate.py:
411 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists 691 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
412 692
413 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 693 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
414 src/net/server/gliserv.py: 694 src/net/server/gliserv.py:
415 wrap generated code in a class to isolate it a bit better 695 wrap generated code in a class to isolate it a bit better
416 302 redirects work 696 302 redirects work
417 don't use cgi.escape() for <% %> 697 don't use cgi.escape() for <% %>
418 src/net/server/html/webgli/*: 698 src/net/server/html/webgli/*:
419 load/save profile 699 load/save profile
420 src/GLIUtility.py: 700 src/GLIUtility.py:
421 change /sbin/lspci to just lspci 701 change /sbin/lspci to just lspci
422 702
423 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 703 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
424 src/GLIClientController.py: 704 src/GLIClientController.py:
425 change ordering of statements in CC run() while loop to not go past the end 705 change ordering of statements in CC run() while loop to not go past the end
426 of the array 706 of the array
427 src/GLIArchitectureTemplate.py: 707 src/GLIArchitectureTemplate.py:
428 removed redundant bind mounts 708 removed redundant bind mounts
429 709
430 18 Dec 2005; Preston Cody <codeman@gentoo.org> 710 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
431 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py 711 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
432 added a diagram by blackace from last night. 712 added a diagram by blackace from last night.
433 added the glossary in RTF format. 713 added the glossary in RTF format.
434 714
435 17 Dec 2005; Preston Cody <codeman@gentoo.org> 715 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
436 x86AT: separated out emerge/configure from running of bootloader 716 x86AT: separated out emerge/configure from running of bootloader
437 added MBR drive support to lilo. 717 added MBR drive support to lilo.
438 these changes will likely not work. 718 these changes will likely not work.
439 AT: added setup_and_run_bootloader step. 719 AT: added setup_and_run_bootloader step.
440 720
441 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 721 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
442 src/net/server/gliserv.py: 722 src/net/server/gliserv.py:
443 call generated code in a function 723 call generated code in a function
444 src/net/server/html/webgli/*: 724 src/net/server/html/webgli/*:
445 include top/bottom 725 include top/bottom
446 src/GLIArchitectureTemplate.py, src/GLIClientController.py, 726 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
447 src/GLIClientCongifuration.py: 727 src/GLIClientCongifuration.py:
448 install mode magic 728 install mode magic
449 729
450 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 730 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
451 src/GLIClientController.py: 731 src/GLIClientController.py:
452 use GLIException when there's an import problem 732 use GLIException when there's an import problem
453 added debug code to show install_steps 733 added debug code to show install_steps
454 src/templates/amd64ArchitectureTemplate.py: 734 src/templates/amd64ArchitectureTemplate.py:
455 add . to import path 735 add . to import path
456 proper path this time: ../../templates 736 proper path this time: ../../templates
457 src/GLIArchitectureTemplate.py: 737 src/GLIArchitectureTemplate.py:
458 add _portage_best_version() function 738 add _portage_best_version() function
459 739
460 11 Dec 2005; Preston Cody <codeman@gentoo.org> 740 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
461 added initial glossary and gimli diagram to the docs directory. 741 added initial glossary and gimli diagram to the docs directory.
462 modify gli-dialog to allow editing of the install_profile after loading XML. 742 modify gli-dialog to allow editing of the install_profile after loading XML.
463 743
464 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 744 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
465 src/net/server/html/webgli/: 745 src/net/server/html/webgli/:
466 converted globaluse, localuse, networkmounts, portagetree, and stageselection 746 converted globaluse, localuse, networkmounts, portagetree, and stageselection
467 moved saveclientconfig stuff into clientconfig 747 moved saveclientconfig stuff into clientconfig
468 moved saveconfigfiles into config files 748 moved saveconfigfiles into config files
469 converted etc_portage and makedotconf 749 converted etc_portage and makedotconf
474 HTML escape <% %> stuff 754 HTML escape <% %> stuff
475 work around python's sucky regexes 755 work around python's sucky regexes
476 src/GLIInstallProfile.py: 756 src/GLIInstallProfile.py:
477 allow set_{rsync,ftp,http}_proxy() to accept empty values 757 allow set_{rsync,ftp,http}_proxy() to accept empty values
478 758
479 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 759 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
480 src/net/server/gliserv.py: 760 src/net/server/gliserv.py:
481 initial commit of Legolas templating engine 761 initial commit of Legolas templating engine
482 302 redirects 762 302 redirects
483 src/net/server/html/index.html, src/net/server/webgli_template.html: 763 src/net/server/html/index.html, src/net/server/webgli_template.html:
484 minor changes for new code 764 minor changes for new code
485 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml: 765 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
486 initial commit of the conversion from the monolithic WebGLIHandler.py to the 766 initial commit of the conversion from the monolithic WebGLIHandler.py to the
487 one file per path Legolas goodness 767 one file per path Legolas goodness
488 partitioning[2-4] done 768 partitioning[2-4] done
489 769
490 5 Dec 2005; Preston Cody <codeman@gentoo.org> 770 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
491 webgli: dhcp options in CC and post-install. 771 webgli: dhcp options in CC and post-install.
492 updated comparison chart. 772 updated comparison chart.
493 webgli: etc/portage/* and distcc support added. not too-well tested. 773 webgli: etc/portage/* and distcc support added. not too-well tested.
494 774
495 4 Dec 2005; Preston Cody <codeman@gentoo.org> 775 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
496 webgli_template.html: valign=top on left side. 776 webgli_template.html: valign=top on left side.
497 webgli: fix bootloader boot_device. now working. 777 webgli: fix bootloader boot_device. now working.
498 webgli: CC proxy done. post-install proxy in progress. 778 webgli: CC proxy done. post-install proxy in progress.
499 779
500 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> 780 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
501 src/net/server/webgli_template.html: 781 src/net/server/webgli_template.html:
502 increase padding for content cell to 7px and add colspan=2 782 increase padding for content cell to 7px and add colspan=2
503 783
504 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> 784 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
505 webgli: added graphic bar on top 785 webgli: added graphic bar on top
506 webgli: added hover effects on the links on the left 786 webgli: added hover effects on the links on the left
507 webgli: re-rendered header_bg.png to stretch without artifacts 787 webgli: re-rendered header_bg.png to stretch without artifacts
508 788
509 3 Dec 2005; Preston Cody <codeman@gentoo.org> 789 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
510 webgli: make.conf disabling fixes for dynamic_stage3 790 webgli: make.conf disabling fixes for dynamic_stage3
511 fixed portage snapshot browse popup 791 fixed portage snapshot browse popup
512 all changes tested. 792 all changes tested.
513 webgli: add debug mode to CC screen. the screen still needs lots of work. 793 webgli: add debug mode to CC screen. the screen still needs lots of work.
514 794
515 1 Dec 2005; Preston Cody <codeman@gentoo.org> 795 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
516 added debug mode question to gli-dialog 796 added debug mode question to gli-dialog
517 added CC proxies to CC networking for gli-dialog 797 added CC proxies to CC networking for gli-dialog
518 webgli: fixed skip CC networking if connection active 798 webgli: fixed skip CC networking if connection active
519 webgli: portage snapshot defaults to CD 799 webgli: portage snapshot defaults to CD
520 webgli: bootloader mbr drive selection 800 webgli: bootloader mbr drive selection
521 webgli: USE flags unselectable if dynamic_stage3 801 webgli: USE flags unselectable if dynamic_stage3
522 webgli: manual extra packages and save button. 802 webgli: manual extra packages and save button.
523 803
524 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 804 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
525 src/GLIUtility.py: 805 src/GLIUtility.py:
526 change ping count to 2 806 change ping count to 2
527 docs/comparison.html 807 docs/comparison.html
528 initial commit 808 initial commit
529 809
530 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 810 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
531 src/templates/x86ArchitectureTemplate.py: 811 src/templates/x86ArchitectureTemplate.py:
532 fix map() issue with grub code 812 fix map() issue with grub code
533 replace kernel_names and initrd_names loops with one-liners 813 replace kernel_names and initrd_names loops with one-liners
534 814
535 27 Nov 2005; Preston Cody <codeman@gentoo.org> 815 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
536 gli-dialog won't let you dynamic stage3 without systempkgs.txt. 816 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
537 initial gli-dialog support for recommended partitioning layout and clear. 817 initial gli-dialog support for recommended partitioning layout and clear.
538 failure cleanup now an option for gli-dialog. 818 failure cleanup now an option for gli-dialog.
539 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf 819 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
540 added comparison list and updated TODO! 820 added comparison list and updated TODO!
541 821
542 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 822 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
543 src/GLIArchitectureTemplate.py: 823 src/GLIArchitectureTemplate.py:
544 fix to stage1() debug code 824 fix to stage1() debug code
545 fix to stage2() debug code 825 fix to stage2() debug code
546 826
547 26 Nov 2005; Preston Cody <codeman@gentoo.org> 827 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
548 some more bootloader code fixes. forgot boot_device != mbr_device. 828 some more bootloader code fixes. forgot boot_device != mbr_device.
549 829
550 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 830 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
551 src/GLIStorageDevice.py: 831 src/GLIStorageDevice.py:
552 fix to unallocated space merging when last one is after part 4 832 fix to unallocated space merging when last one is after part 4
553 833
554 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 834 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
555 src/GLIArchitectureTemplate.py: 835 src/GLIArchitectureTemplate.py:
556 small fix to debugging code in copy_pkg_to_chroot() 836 small fix to debugging code in copy_pkg_to_chroot()
557 837
558 23 Nov 2005; Preston Cody <codeman@gentoo.org> 838 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
559 more bugfixes with bootloader code 839 more bugfixes with bootloader code
560 gli-dialog side appears to work 840 gli-dialog side appears to work
561 841
562 21 Nov 2005; Preston Cody <codeman@gentoo.org> 842 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
563 initial adding of boot_device to backend. 843 initial adding of boot_device to backend.
564 initial boot_device support added to gli-dialog. 844 initial boot_device support added to gli-dialog.
565 some fixes of my poor coding 845 some fixes of my poor coding
566 846
567 20 Nov 2005; Preston Cody <codeman@gentoo.org> 847 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
568 converted gli-dialog to use the install_package_list. 848 converted gli-dialog to use the install_package_list.
569 gtkfe has already been converted by AllanonJL 849 gtkfe has already been converted by AllanonJL
570 new way working in gli-dialog now and added to webgli. 850 new way working in gli-dialog now and added to webgli.
571 added set/get_boot_device() to IP 851 added set/get_boot_device() to IP
572 852
573 19 Nov 2005; Preston Cody <codeman@gentoo.org> 853 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
574 get_install_package_list added to InstallProfile. This can be used by the FEs 854 get_install_package_list added to InstallProfile. This can be used by the FEs
575 855
576 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 856 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
577 src/templates/x86ArchitectureTemplate.py: 857 src/templates/x86ArchitectureTemplate.py:
578 call ls with '-1 --color=no' 858 call ls with '-1 --color=no'
579 859
580 16 Nov 2005; Preston Cody <codeman@gentoo.org> 860 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
581 added warning (#9) to GRP ppl about stage3 tarballs 861 added warning (#9) to GRP ppl about stage3 tarballs
582 862
583 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 863 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
584 src/GLIArchitectureTemplate.py: 864 src/GLIArchitectureTemplate.py:
585 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get 865 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
586 confused 866 confused
587 867
588 13 Nov 2005; Preston Cody <codeman@gentoo.org> 868 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
589 removed protocols from rc.conf screens 869 removed protocols from rc.conf screens
590 finished initial rc.conf and make.conf in webgli 870 finished initial rc.conf and make.conf in webgli
591 871
592 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 872 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
593 src/net/server/gliserv.py: 873 src/net/server/gliserv.py:
594 add -h option to usage() 874 add -h option to usage()
595 show time and request URI in debug mode 875 show time and request URI in debug mode
596 show client IP in debug mode 876 show client IP in debug mode
597 just use IP instead of trying to do a reverse lookup 877 just use IP instead of trying to do a reverse lookup
598 878
599 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 879 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
600 src/net/server/gliserv.py: 880 src/net/server/gliserv.py:
601 'classier' 401 message 881 'classier' 401 message
602 proper commandline parsing 882 proper commandline parsing
603 help via -h 883 help via -h
604 user/pass can be specificed via commandline option 884 user/pass can be specificed via commandline option
605 885
606 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 886 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
607 src/net/server/gliserv.py: 887 src/net/server/gliserv.py:
608 basic HTTP auth 888 basic HTTP auth
609 889
610 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 890 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
611 src/net/server/gliserv.py: 891 src/net/server/gliserv.py:
612 dynamic module reloading (yipee!) 892 dynamic module reloading (yipee!)
613 send 'Last-Modified' header for real files 893 send 'Last-Modified' header for real files
614 respond to HEAD with just headers 894 respond to HEAD with just headers
615 src/net/server/handlers/WebGLIHandler.py: 895 src/net/server/handlers/WebGLIHandler.py:
616 icons for drives 896 icons for drives
617 897
618 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 898 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
619 src/net/server/handlers/WebGLIHandler.py: 899 src/net/server/handlers/WebGLIHandler.py:
620 initial 'pretty' partition table display support 900 initial 'pretty' partition table display support
621 clicking partition in 'pretty' display works instead of radio buttons 901 clicking partition in 'pretty' display works instead of radio buttons
622 radio buttons and pretty display work together 902 radio buttons and pretty display work together
623 META redirect instead of javascript 903 META redirect instead of javascript
629 whoops...that shouldn't have been commented out 909 whoops...that shouldn't have been commented out
630 create image_dir with -p in copy_pkg_to_chroot() 910 create image_dir with -p in copy_pkg_to_chroot()
631 more generic of symlink crappiness 911 more generic of symlink crappiness
632 new copy_pkg_to_chroot() actually works now 912 new copy_pkg_to_chroot() actually works now
633 913
634 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 914 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
635 src/GLIStorageDevice.py: 915 src/GLIStorageDevice.py:
636 initial generic disk support 916 initial generic disk support
637 fixes for add_partition() code 917 fixes for add_partition() code
638 src/net/server/handlers/WebGLIHandler.py: 918 src/net/server/handlers/WebGLIHandler.py:
639 added support for creating generic disks 919 added support for creating generic disks
640 add new partition working 920 add new partition working
641 save and delete partitions 921 save and delete partitions
642 922
643 6 Nov 2005; Preston Cody <codeman@gentoo.org> 923 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
644 webgli: Partitioning making progress. 924 webgli: Partitioning making progress.
645 925
646 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 926 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
647 src/GLIArchitectureTemplate.py: 927 src/GLIArchitectureTemplate.py:
648 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to 928 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
649 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image 929 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
650 dir) and works around /etc/gconf symlink problem 930 dir) and works around /etc/gconf symlink problem
651 931
652 5 Nov 2005; Preston Cody <codeman@gentoo.org> 932 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
653 webgli: lots of updates. preliminary partitioning. extra packages works. 933 webgli: lots of updates. preliminary partitioning. extra packages works.
654 934
655 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 935 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
656 src/net/server/gliserv.py: 936 src/net/server/gliserv.py:
657 httpd now supports HTTPS and falls back to HTTP if not available 937 httpd now supports HTTPS and falls back to HTTP if not available
658 make fallback actually work 938 make fallback actually work
659 src/net/server/SecureXMLRPCServer.py: 939 src/net/server/SecureXMLRPCServer.py:
660 SecureSocketServer is now threaded 940 SecureSocketServer is now threaded
661 941
662 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> 942 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
663 src/net/client/gliclient.py: 943 src/net/client/gliclient.py:
664 try to use HTTPS for XMLRPC first and fallback to HTTP 944 try to use HTTPS for XMLRPC first and fallback to HTTP
665 pretend mode 945 pretend mode
666 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py: 946 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
667 HTTPS XMLRPC goodness from samyron 947 HTTPS XMLRPC goodness from samyron
668 pass name of certificate 948 pass name of certificate
669 949
670 31 Oct 2005; Preston Cody <codeman@gentoo.org> 950 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
671 wegli: daemons and services screens done. 951 wegli: daemons and services screens done.
672 952
673 30 Oct 2005; Preston Cody <codeman@gentoo.org> 953 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
674 webgli: networking and users screens 954 webgli: networking and users screens
675 added return_redirect to handler.py 955 added return_redirect to handler.py
676 loading and saving install/client profiles works for webgli now 956 loading and saving install/client profiles works for webgli now
677 Review also done 957 Review also done
678 958
679*GLI-0.2 (27 Oct 2005) 959*GLI-0.2 (27 Oct 2005)
680 960
681 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 961 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
682 src/templates/x86ArchitectureTemplate.py: 962 src/templates/x86ArchitectureTemplate.py:
683 properly check for bootloader emerge exist status with exitsuccess() 963 properly check for bootloader emerge exist status with exitsuccess()
684 log output of grub install command 964 log output of grub install command
685 add --batch --no-floppy to grub command 965 add --batch --no-floppy to grub command
686 grubinstallstring only gets logged if debug is on 966 grubinstallstring only gets logged if debug is on
687 src/GLIUtility.py: 967 src/GLIUtility.py:
688 update progress bar to 100% when process finishes 968 update progress bar to 100% when process finishes
689 969
690 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 970 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
691 src/GLIClientController.py: 971 src/GLIClientController.py:
692 added debugging code for the interaction between the 2 threads via Event() 972 added debugging code for the interaction between the 2 threads via Event()
693 src/GLIUtility.py: 973 src/GLIUtility.py:
694 doubled the buffer size in spawn() 974 doubled the buffer size in spawn()
695 bump buffer size up to 16384 975 bump buffer size up to 16384
697 src/GLIArchitectureTemplate.py: 977 src/GLIArchitectureTemplate.py:
698 kernelpkgs.txt support code 978 kernelpkgs.txt support code
699 above disabled because it sucks 979 above disabled because it sucks
700 added add_pkg_to_world() 980 added add_pkg_to_world()
701 981
702 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 982 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
703 src/GLIArchitectureTemplate.py: 983 src/GLIArchitectureTemplate.py:
704 use tar | tar to copy files in copy_pkg_to_chroot() 984 use tar | tar to copy files in copy_pkg_to_chroot()
705 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV 985 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
706 986
707 23 Oct 2005; Preston Cody <codeman@gentoo.org> 987 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
708 DEBUGGING ADDED TO AT. verbose field added to CConfig. 988 DEBUGGING ADDED TO AT. verbose field added to CConfig.
709 989
710 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 990 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
711 src/net/server/gliserv.py: 991 src/net/server/gliserv.py:
712 / maps to index.html 992 / maps to index.html
713 look for actual files in html/ 993 look for actual files in html/
714 src/net/html: 994 src/net/html:
715 new template 995 new template
719 added copy_pkg_to_chroot() 999 added copy_pkg_to_chroot()
720 added debug code to dynamic-stage3 1000 added debug code to dynamic-stage3
721 switch dynamic-stage3 to new method 1001 switch dynamic-stage3 to new method
722 lots of bug fixes from adding debug code 1002 lots of bug fixes from adding debug code
723 1003
724 22 Oct 2005; Preston Cody <codeman@gentoo.org> 1004 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
725 webgli initial bootloader support + changed make.conf. 1005 webgli initial bootloader support + changed make.conf.
726 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg. 1006 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
727 1007
728 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1008 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
729 src/GLIUtility.py: 1009 src/GLIUtility.py:
730 horrible tangled mess of code that is tarball unpacking subprogress display 1010 horrible tangled mess of code that is tarball unpacking subprogress display
731 add unpack progress to portage snapshot 1011 add unpack progress to portage snapshot
732 use read() instead of readlines() in spawn() 1012 use read() instead of readlines() in spawn()
733 only update progress bar for whole percents 1013 only update progress bar for whole percents
734 1014
735 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1015 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
736 src/templates/x86ArchitectureTemplate.py: 1016 src/templates/x86ArchitectureTemplate.py:
737 change call to 'grub' to use GLIUtility.exitsuccess() 1017 change call to 'grub' to use GLIUtility.exitsuccess()
738 add definition of 'build_mode' in _configure_lilo() 1018 add definition of 'build_mode' in _configure_lilo()
739 src/misc/updategtkfe, src/misc/updateglid: 1019 src/misc/updategtkfe, src/misc/updateglid:
740 fix so subshell is called in root shell 1020 fix so subshell is called in root shell
741 1021
742 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1022 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
743 src/net/server/handlers/WebGLIHandler.py: 1023 src/net/server/handlers/WebGLIHandler.py:
744 stage screen launches URI browser in sized window with various properties set 1024 stage screen launches URI browser in sized window with various properties set
745 1025
746 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1026 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
747 src/misc/updategtkfe: 1027 src/misc/updategtkfe:
748 updated to actually work 1028 updated to actually work
749 remove previous snapshot and extracted dir before downloading 1029 remove previous snapshot and extracted dir before downloading
750 src/misc/updateglid: 1030 src/misc/updateglid:
751 updated to actually work 1031 updated to actually work
752 src/templates/x86ArchitectureTemplate.py: 1032 src/templates/x86ArchitectureTemplate.py:
753 fixed bug where grub code was looking for 'root+root+file_name2' 1033 fixed bug where grub code was looking for 'root+root+file_name2'
754 1034
755 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1035 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
756 src/net/server/handlers/WebGLIHandler.py: 1036 src/net/server/handlers/WebGLIHandler.py:
757 URI browser 1037 URI browser
758 added mirror selection 1038 added mirror selection
759 src/GLIUtility.py: 1039 src/GLIUtility.py:
760 ls via ssh strips off ending * 1040 ls via ssh strips off ending *
761 1041
762 16 Oct 2005; Preston Cody <codeman@gentoo.org> 1042 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
763 more updates to webgli. stage selection. 1043 more updates to webgli. stage selection.
764 1044
765 11 Oct 2005; Preston Cody <codeman@gentoo.org> 1045 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
766 updated webgli with preliminary Network Mounts support. 1046 updated webgli with preliminary Network Mounts support.
767 1047
768 9 Oct 2005; Preston Cody <codeman@gentoo.org> 1048 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
769 GenDialog: string formatting and yes/no label fixes. 1049 GenDialog: string formatting and yes/no label fixes.
770 added WebGLI template for gliserv.py 1050 added WebGLI template for gliserv.py
771 added WebGLIHandler as well as a definition for it in gliserv.py 1051 added WebGLIHandler as well as a definition for it in gliserv.py
772 updates to the webgli files even though they won't be there for long. 1052 updates to the webgli files even though they won't be there for long.
773 Utility: remove exception for non-existant grppkgs.txt until the new livecd 1053 Utility: remove exception for non-existant grppkgs.txt until the new livecd
774 goes public. 1054 goes public.
775 1055
776 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1056 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
777 src/net/server/gliserv.py: 1057 src/net/server/gliserv.py:
778 override dict to not be so anal 1058 override dict to not be so anal
779 main server now loads separate module to handle requests 1059 main server now loads separate module to handle requests
780 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py: 1060 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
781 split out profile URLs into separate handler function 1061 split out profile URLs into separate handler function
782 move handlers into subdirectory 1062 move handlers into subdirectory
783 add Welcome and Clients handlers 1063 add Welcome and Clients handlers
784 1064
785 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1065 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
786 src/GLIUtility.py: 1066 src/GLIUtility.py:
787 raise exception if password prompt received twice 1067 raise exception if password prompt received twice
788 1068
789 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1069 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
790 src/GLIUtility.py: 1070 src/GLIUtility.py:
791 removed rot13ify() 1071 removed rot13ify()
792 1072
793 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> 1073 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
794 src/net/server/gliserv.py: 1074 src/net/server/gliserv.py:
795 allow for param to be passed multiple times in GET 1075 allow for param to be passed multiple times in GET
796 no XMLRPC functions return None 1076 no XMLRPC functions return None
797 modify POST request parsing to only create a list if needed 1077 modify POST request parsing to only create a list if needed
798 fix GET request parsing so the list creation for multiple values works 1078 fix GET request parsing so the list creation for multiple values works
799 src/net/client/gliclient.py: 1079 src/net/client/gliclient.py:
800 various typo and type mismatch fixes 1080 various typo and type mismatch fixes
801 exit after exception 1081 exit after exception
802 1082
803 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1083 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
804 src/net/client/gliclient.py: 1084 src/net/client/gliclient.py:
805 initial commit 1085 initial commit
806 pass MAC to XMLRPC functions 1086 pass MAC to XMLRPC functions
807 src/net/server/GLIServerProfile.py: 1087 src/net/server/GLIServerProfile.py:
808 rename GLIClientsProfiles to GLIServerProfile 1088 rename GLIClientsProfiles to GLIServerProfile
809 1089
810 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1090 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
811 src/net/server/gliserv.py: 1091 src/net/server/gliserv.py:
812 now handles POST requests 1092 now handles POST requests
813 move majority of request handling code to common_handler() to reduce code 1093 move majority of request handling code to common_handler() to reduce code
814 duplication 1094 duplication
815 profile loading 1095 profile loading
817 /showclients redesign 1097 /showclients redesign
818 template fixes 1098 template fixes
819 allow handler functions to add/change headers 1099 allow handler functions to add/change headers
820 save profile 1100 save profile
821 1101
822 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1102 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
823 src/net/server/GLIClientsProfiles.py: 1103 src/net/server/GLIClientsProfiles.py:
824 initial commit 1104 initial commit
825 src/net/server/template.html: 1105 src/net/server/template.html:
826 initial commit 1106 initial commit
827 src/net/server/gliserv.py: 1107 src/net/server/gliserv.py:
828 add template mojo 1108 add template mojo
829 1109
830 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1110 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
831 src/net/server/gliserv.py: 1111 src/net/server/gliserv.py:
832 XMLRPC mojo 1112 XMLRPC mojo
833 1113
834 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1114 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
835 src/GLIArchitectureTemplate.py: 1115 src/GLIArchitectureTemplate.py:
836 add code in _edit_config() to comment line where variable is defined 1116 add code in _edit_config() to comment line where variable is defined
837 previously 1117 previously
838 insert new line under previous definition of variable if it exists 1118 insert new line under previous definition of variable if it exists
839 small _edit_config() cleanup 1119 small _edit_config() cleanup
840 src/GLIStorageDevice.py: 1120 src/GLIStorageDevice.py:
841 add clear_partitions() function 1121 add clear_partitions() function
842 new sizes for recommended partition layout 1122 new sizes for recommended partition layout
843 automatically calculate swap size for recommended layout 1123 automatically calculate swap size for recommended layout
844 1124
845 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1125 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
846 src/templates/x86ArchitectureTemplate.py: 1126 src/templates/x86ArchitectureTemplate.py:
847 fat16 mojo 1127 fat16 mojo
848 1128
849 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1129 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
850 src/GLIStorageDevice.py: 1130 src/GLIStorageDevice.py:
851 prevent do_recommended() from being run twice 1131 prevent do_recommended() from being run twice
852 rewrite do_recommended() to be more robust 1132 rewrite do_recommended() to be more robust
853 src/GLIArchitectureTemplate.py: 1133 src/GLIArchitectureTemplate.py:
854 rework _edit_config() to not write duplicate entries 1134 rework _edit_config() to not write duplicate entries
855 1135
856 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1136 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
857 src/GLIStorageDevice.py: 1137 src/GLIStorageDevice.py:
858 added do_recommended() function to automatically created 256M/1G/* layout 1138 added do_recommended() function to automatically created 256M/1G/* layout
859 1139
860 17 Sep 2005; Preston Cody <codeman@gentoo.org> 1140 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
861 src/gli-dialog.py: added set_distcc to the list 1141 src/gli-dialog.py: added set_distcc to the list
862 GenDialog: added set_distcc. untested. 1142 GenDialog: added set_distcc. untested.
863 IP: added install_distcc flag. 1143 IP: added install_distcc flag.
864 AT: added install_distcc function based on the flag. runs after build_kernel 1144 AT: added install_distcc function based on the flag. runs after build_kernel
865 changed AT spawn command for distcc for nodeps. 1145 changed AT spawn command for distcc for nodeps.
866 1146
867 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1147 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
868 src/GLIUtility.py: 1148 src/GLIUtility.py:
869 add rot13ify() function 1149 add rot13ify() function
870 1150
871 16 Sep 2005; Preston Cody <codeman@gentoo.org> 1151 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
872 src/GenDialog.py 1152 src/GenDialog.py:
873 added a sentence of text. unchecking support added. 1153 added a sentence of text. unchecking support added.
874 1154
875 15 Sep 2005; Preston Cody <codeman@gentoo.org> 1155 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
876 src/GLIUtility.py 1156 src/GLIUtility.py:
877 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus 1157 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
878 src/GenDialog.py 1158 src/GenDialog.py:
879 still working on extra_packages. transformed the list to new format. 1159 still working on extra_packages. transformed the list to new format.
880 added GRP indication to list. untested. 1160 added GRP indication to list. untested.
881 TODO lists updated. 1161 TODO lists updated.
882 src/fe/dialog/gli-dialog.py 1162 src/fe/dialog/gli-dialog.py:
883 spelling mistook. 1163 spelling mistook.
884 1164
885 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1165 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
886 src/GLIUtility.py: 1166 src/GLIUtility.py:
887 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found 1167 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
888 1168
889 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1169 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
890 src/GLIUtility.py: 1170 src/GLIUtility.py:
891 add get_directory_listing_from_uri() 1171 add get_directory_listing_from_uri()
892 add http support to above 1172 add http support to above
893 add ftp support to above 1173 add ftp support to above
894 add scp support to above 1174 add scp support to above
895 src/GLIArchitectureTemplate.py: 1175 src/GLIArchitectureTemplate.py:
896 "0" instead of 0 for key of single-element dict passed to _edit_config() 1176 "0" instead of 0 for key of single-element dict passed to _edit_config()
897 1177
898 5 Sep 2005; Preston Cody <codeman@gentoo.org> 1178 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
899 value_only -> only_value 1179 value_only -> only_value
900 1180
901 3 Sep 2005; Preston Cody <codeman@gentoo.org> 1181 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
902 gutted out all of etc_portage structure since it is now all handled by 1182 gutted out all of etc_portage structure since it is now all handled by
903 etc_files 1183 etc_files
904 1184
905 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1185 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
906 src/GLIArchitectureTemplate.py: 1186 src/GLIArchitectureTemplate.py:
907 install_packages() sends progress update notifications 1187 install_packages() sends progress update notifications
908 src/templates/x86ArchitectureTemplate.py: 1188 src/templates/x86ArchitectureTemplate.py:
909 increase sleep to 5s between format tries 1189 increase sleep to 5s between format tries
910 src/GLIClientController.py: 1190 src/GLIClientController.py:
911 pass 'self' to AT instead of 'self._pretend' 1191 pass 'self' to AT instead of 'self._pretend'
912 1192
913 2 Sep 2005; Preston Cody <codeman@gentoo.org> 1193 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
914 logger -> logger.log in x86AT 1194 logger -> logger.log in x86AT
915 1195
916 1 Sep 2005; Preston Cody <codeman@gentoo.org> 1196 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
917 added set_etc_portage to IP. debugging gli-d's support for it. 1197 added set_etc_portage to IP. debugging gli-d's support for it.
918 1198
919 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1199 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
920 src/templates/x86ArchitectureTemplate.py: 1200 src/templates/x86ArchitectureTemplate.py:
921 switch to 3 tries for mkfs instead of looping waiting for dev node to exist 1201 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
922 1202
923 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1203 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
924 src/GLIArchitectureTemplate.py: 1204 src/GLIArchitectureTemplate.py:
925 add _portage_best_version() function and rework install_packages() to allow 1205 add _portage_best_version() function and rework install_packages() to allow
926 for future X of Y tracking 1206 for future X of Y tracking
927 Use best_visible instead of best_version 1207 Use best_visible instead of best_version
928 tracked down and fixed missing = causing empty install extra packages 1208 tracked down and fixed missing = causing empty install extra packages
929 use = when emerging also 1209 use = when emerging also
930 quickpkg hokey pokey 1210 quickpkg hokey pokey
931 run _get_packages_to_emerge() again with -pk 1211 run _get_packages_to_emerge() again with -pk
932 1212
933 22 Aug 2005; Preston Cody <codeman@gentoo.org> 1213 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
1214 src/ArchTemplate:
934 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at 1215 removed install_xorg_x11, and put the xorg.conf copying at
935 the end of install_packages. 1216 the end of install_packages.
936 added updateglid to /src/misc 1217 added updateglid to /src/misc
937 updated all core files with new GPL notice and copyright statement. 1218 updated all core files with new GPL notice and copyright statement.
938 1219
939 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1220 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
940 src/GLIUtility.py: 1221 src/GLIUtility.py:
941 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find 1222 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
942 a snapshot in /mnt/cdrom/snapshots/ 1223 a snapshot in /mnt/cdrom/snapshots/
943 get_snapshot_from_cd() adds file:// at the beginning 1224 get_snapshot_from_cd() adds file:// at the beginning
944 change calls to extra package special case functions to 'self.blah' 1225 change calls to extra package special case functions to 'self.blah'
945 1226
946 21 Aug 2005; Preston Cody <codeman@gentoo.org> 1227 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
947 src/ArchTemplate: changed "voodoo". 1228 src/ArchTemplate: changed "voodoo".
948 changed order of portage sync methods. made a fallback to webrsync if 1229 changed order of portage sync methods. made a fallback to webrsync if
949 normal emerge sync fails. 1230 normal emerge sync fails.
950 removed get_sources_from_cd because it is obsolete. 1231 removed get_sources_from_cd because it is obsolete.
951 add special cases to install_packages. remove fatal exception on package 1232 add special cases to install_packages. remove fatal exception on package
953 add install_xorg_x11. remove adding of xdm to runlevel. this will now be 1234 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
954 handled in the FEs. 1235 handled in the FEs.
955 src/GenDialog: added a bunch of code for dealing with x11-based packages. 1236 src/GenDialog: added a bunch of code for dealing with x11-based packages.
956 awaiting testing. 1237 awaiting testing.
957 1238
958 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1239 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
959 src/GLIStorageDevice.py: 1240 src/GLIStorageDevice.py:
960 global try/except block around fs resizable detection code 1241 global try/except block around fs resizable detection code
961 src/GLIArchitectureTemplate.py, src/GLIClientController.py: 1242 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
962 install-failed cleanup function 1243 install-failed cleanup function
963 1244
964 18 Aug 2005; Preston Cody <codeman@gentoo.org> 1245 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
965 x86ArchTemplate: updated lilo code. separated out THREE commands. untested. 1246 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
966 1247
967 16 Aug 2005; Preston Cody <codeman@gentoo.org> 1248 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
968 GLIGenDialog: 1249 GLIGenDialog:
969 add drive choices for loaded configs. 1250 add drive choices for loaded configs.
970 force snapshot for dynamic_stage3 1251 force snapshot for dynamic_stage3
971 init the snapshoturi input to the cd snapshot if not already selected. 1252 init the snapshoturi input to the cd snapshot if not already selected.
972 if dynamic_stage3, skip the make.conf step. 1253 if dynamic_stage3, skip the make.conf step.
973 GLIUtility: add get_cd_snapshot_uri() for local snapshots. 1254 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
974 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog 1255 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
975 1256
976 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1257 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
977 src/GLIArchitectureTemplate.py: 1258 src/GLIArchitectureTemplate.py:
978 manually call MAKEDEV in stage3-dynamic code 1259 manually call MAKEDEV in stage3-dynamic code
979 copy /etc/inittab.old to /etc/inittab in chroot 1260 copy /etc/inittab.old to /etc/inittab in chroot
980 src/GLIUtility.py: 1261 src/GLIUtility.py:
981 add beginning of validate_uri() function 1262 add beginning of validate_uri() function
982 add file:/// support to validate_uri() 1263 add file:/// support to validate_uri()
983 single quotes when setting livecd password 1264 single quotes when setting livecd password
984 1265
985 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1266 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
986 src/GLIGenDialog.py: 1267 src/GLIGenDialog.py:
987 change getmountpoint() to get_mountpoint() 1268 change getmountpoint() to get_mountpoint()
988 src/misc/updategtkfe: 1269 src/misc/updategtkfe:
989 committed script to automatically download latest snapshot and run gtkfe 1270 committed script to automatically download latest snapshot and run gtkfe
990 src/templates/x86ArchitectureTemplate.py: 1271 src/templates/x86ArchitectureTemplate.py:
991 fix _configure_lilo_add_windows() for IP -> GLISD stuff 1272 fix _configure_lilo_add_windows() for IP -> GLISD stuff
992 src/GLIArchitectureTemplate.py: 1273 src/GLIArchitectureTemplate.py:
993 give tmp_minor an initial value in mount_local_partitions so that the value 1274 give tmp_minor an initial value in mount_local_partitions so that the value
994 remain from the previous drive 1275 remain from the previous drive
995 1276
996 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1277 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
997 src/templates/x86ArchitectureTemplate.py: 1278 src/templates/x86ArchitectureTemplate.py:
998 Fix _configure_lilo() for IP using GLISD stuff 1279 Fix _configure_lilo() for IP using GLISD stuff
999 src/GLIArchitectureTemplate.py: 1280 src/GLIArchitectureTemplate.py:
1000 install_cron_daemon() treats "none" specially 1281 install_cron_daemon() treats "none" specially
1001 1282
1002 14 Aug 2005; Preston Cody <codeman@gentoo.org> 1283 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1003 old patch from Steven Mertens to resolve bug #96642 1284 old patch from Steven Mertens to resolve bug #96642
1004 numerous asthetic changes to GenDialog, no real functionality changes though. 1285 numerous asthetic changes to GenDialog, no real functionality changes though.
1005 strings renamed for global use if necessary. 1286 strings renamed for global use if necessary.
1006 fix all three parts of bug 102291 1287 fix all three parts of bug 102291
1007 disable set_etc_portage until fully-written. 1288 disable set_etc_portage until fully-written.
1008 1289
1009 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1290 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1010 src/GLIClientController.py: 1291 src/GLIClientController.py:
1011 lower-case http/ftp proxy envvars 1292 lower-case http/ftp proxy envvars
1012 1293
1013 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1294 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1014 src/GLIClientController.py: 1295 src/GLIClientController.py:
1015 log end of pre_install steps to aid in debugging 1296 log end of pre_install steps to aid in debugging
1016 src/templates/x86ArchitectureTemplate.py: 1297 src/templates/x86ArchitectureTemplate.py:
1017 change set_flag(flag) to set_flag(flag, True)...*stab* *stab* 1298 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1018 1299
1019 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1300 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1020 src/GLIArchitectureTemplate.py 1301 src/GLIArchitectureTemplate.py:
1021 check to make sure that the device node we're wait for to exist isn't of 1302 check to make sure that the device node we're wait for to exist isn't of
1022 type 'free' 1303 type 'free'
1023 1304
1024 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1305 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1025 src/GLIGenDialog.py: 1306 src/GLIGenDialog.py:
1026 convert install_packages to list in set_extra_packages() 1307 convert install_packages to list in set_extra_packages()
1027 check return code of checklist() call in "Manual" section 1308 check return code of checklist() call in "Manual" section
1028 *actually* fix the first problem 1309 *actually* fix the first problem
1029 1310
1030 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py: 1311 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1031 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash 1312 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1032 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT). 1313 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1033 1314
1034 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1315 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1035 src/GLIArchitectureTemplate.py: 1316 src/GLIArchitectureTemplate.py:
1036 re-fix net.eth1+ symlink code...wtf is wrong with cvs? 1317 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1037 1318
1038 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1319 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1039 Add CDATA support to SimpleXMLParser and add utility functions for it. 1320 Add CDATA support to SimpleXMLParser and add utility functions for it.
1040 1321
1041 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> 1322 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1042 src/GLIArchitectureTemplate.py: 1323 src/GLIArchitectureTemplate.py:
1043 Fix case where vixie-cron is specified as a full package atom, as we still 1324 Fix case where vixie-cron is specified as a full package atom, as we still
1044 don't want to run 'crontab /etc/crontab' for it. 1325 don't want to run 'crontab /etc/crontab' for it.
1045 1326
1046*GLI-0.1 (3 Aug 2005) 1327*GLI-0.1 (3 Aug 2005)
1047 1328
1048 30 Jul 2005; Preston Cody <codeman@gentoo.org> 1329 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1049 add scp to list of is_uri() so GenDialog doesn't complain. 1330 add scp to list of is_uri() so GenDialog doesn't complain.
1050 fixed livecd-kernel bug in bootloader code. 1331 fixed livecd-kernel bug in bootloader code.
1051 fixed gendialog for dynamic_stage3 instead of "networkless" 1332 fixed gendialog for dynamic_stage3 instead of "networkless"
1052 change bootloader to allow for both initrd and initramfs. 1333 change bootloader to allow for both initrd and initramfs.
1053 fix IP for dynamic_stage3. 1334 fix IP for dynamic_stage3.
1054 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing. 1335 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1055 1336
1056 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1337 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1057 Added full scp:// URI support to get_uri() in GLIUtility 1338 Added full scp:// URI support to get_uri() in GLIUtility
1058 Remove "networkless" from dynamic stage3 if locic. 1339 Remove "networkless" from dynamic stage3 if locic.
1059 Remove print statement from scp:// code. 1340 Remove print statement from scp:// code.
1060 Change scp code to check for "assword: " instead of "Password:" 1341 Change scp code to check for "assword: " instead of "Password:"
1061 Fix post-install network code to create net.eth1+ symlink correctly 1342 Fix post-install network code to create net.eth1+ symlink correctly
1063 Add 2>dev/null to emerge call in _get_packages_to_emerge() 1344 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1064 SimpleXMLParser handles True/False/None correctly now 1345 SimpleXMLParser handles True/False/None correctly now
1065 Comment out above fix 1346 Comment out above fix
1066 Add partitioning wait-for-device-to-exist code to mount_local_partitions 1347 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1067 1348
1068 28 Jul 2005; Scott Myron <samyron@gentoo.org> 1349 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1069 Removed a FIXME in the GLIClientConfiguration that is no 1350 Removed a FIXME in the GLIClientConfiguration that is no
1070 longer needed. 1351 longer needed.
1071 1352
1072 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1353 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1073 Default to x86 in ClientConfig 1354 Default to x86 in ClientConfig
1074 Typo in build-a-stage3 code. 1355 Typo in build-a-stage3 code.
1075 Remove MAKEDEV call in build-a-stage3 postscript. 1356 Remove MAKEDEV call in build-a-stage3 postscript.
1076 1357
1077 26 Jul 2005; Preston Cody <codeman@gentoo.org> 1358 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1078 Rewrote init of IP for gli-d. Other GenDialog updates. 1359 Rewrote init of IP for gli-d. Other GenDialog updates.
1079 allow network_type to be None in CConfig. 1360 allow network_type to be None in CConfig.
1080 1361
1081 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1362 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1082 Add _dynamic_stage3 option to IP. 1363 Add _dynamic_stage3 option to IP.
1083 Add check for that option to dynamic stage3 code in ArchTemplate. 1364 Add check for that option to dynamic stage3 code in ArchTemplate.
1084 Fix code to determine default route in get_eth_info() in GLIUtility. 1365 Fix code to determine default route in get_eth_info() in GLIUtility.
1085 Fix serialization of dns-servers in ClientConfig. 1366 Fix serialization of dns-servers in ClientConfig.
1086 1367
1087 24 Jul 2005; Preston Cody <codeman@gentoo.org> 1368 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1088 changed default values of cron/logger in IP. 1369 changed default values of cron/logger in IP.
1089 moved GenDialog IP init out to the individual files. gli-dialog's version 1370 moved GenDialog IP init out to the individual files. gli-dialog's version
1090 will change quite a bit. 1371 will change quite a bit.
1091 1372
1092 22 Jul 2005; Preston Cody <codeman@gentoo.org> 1373 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1093 added ppcArchTemplate. blank now. working on yaboot. 1374 added ppcArchTemplate. blank now. working on yaboot.
1094 modified ArchTemplate for amd64 and ppc custom kernels. 1375 modified ArchTemplate for amd64 and ppc custom kernels.
1095 skeleton implementation of _configure_yaboot. 1376 skeleton implementation of _configure_yaboot.
1096 small fixes to other templates. 1377 small fixes to other templates.
1097 1378
1098 21 Jul 2005; Preston Cody <codeman@gentoo.org> 1379 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1099 GenDialog updates. changed comment in IP. 1380 GenDialog updates. changed comment in IP.
1100 1381
1101 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org> 1382 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1102 src/GLIInstallProfile.py: 1383 src/GLIInstallProfile.py:
1103 Fix codeman's screwup of changing the service seperator to ',' in the parser 1384 Fix codeman's screwup of changing the service seperator to ',' in the parser
1121 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for 1402 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1122 bootloader works again. Also rename _install_{grub,lilo} to 1403 bootloader works again. Also rename _install_{grub,lilo} to
1123 _configure_{grub,lilo} since they don't install the loaders anymore 1404 _configure_{grub,lilo} since they don't install the loaders anymore
1124 themselves. 1405 themselves.
1125 1406
1126 7 Jul 2005; Preston Cody <codeman@gentoo.org> 1407 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1127 fix global USE flags to not include the arch types at the end. 1408 fix global USE flags to not include the arch types at the end.
1128 updates to GenDialog and gli-d. 1409 updates to GenDialog and gli-d.
1129 1410
1130 6 Jul 2005; Preston Cody <codeman@gentoo.org> 1411 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1131 fixing bootloader code for no initrd and initrd->initramfs naming change. 1412 fixing bootloader code for no initrd and initrd->initramfs naming change.
1132 1413
1133 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1414 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1134 Proper comments and parameters to GLIException in install_mta() 1415 Proper comments and parameters to GLIException in install_mta()
1135 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors() 1416 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1136 Add strip() to list_mirrors(), list_subarch_from_mirror() and 1417 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1137 list_tarball_from_mirror() to eliminate blank last item. 1418 list_tarball_from_mirror() to eliminate blank last item.
1138 1419
1139 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1420 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1140 Added stage3 generation code. 1421 Added stage3 generation code.
1141 1422
1142 5 Jul 2005; Preston Cody <codeman@gentoo.org> 1423 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1143 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge 1424 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1144 Mild changes to GenDialog. 1425 Mild changes to GenDialog.
1145 1426
1146 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1427 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1147 Remove separate install step configure_rc_conf() since it's handled by 1428 Remove separate install step configure_rc_conf() since it's handled by
1148 update_config_files() 1429 update_config_files()
1149 Make a copy of newvalues in _edit_config() so quotes aren't added when the 1430 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1150 function is called twice on the same file. 1431 function is called twice on the same file.
1151 1432
1152 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1433 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1153 Missing \ in sed in _get_packages_to_emerge() 1434 Missing \ in sed in _get_packages_to_emerge()
1154 Removed explicit emerging of hotplug and no longer add it to the runlevel. 1435 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1155 Check in _quickpkg_deps() to ignore blank package names returned from 1436 Check in _quickpkg_deps() to ignore blank package names returned from
1156 _get_packages_to_emerge() 1437 _get_packages_to_emerge()
1157 1438
1158 28 Jun 2005; Preston Cody <codeman@gentoo.org> 1439 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1159 fixed agaffney's missing = and extra : in x86AT. commented out crashing line 1440 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1160 in the dialog.py gauge code. 1441 in the dialog.py gauge code.
1161 1442
1162 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1443 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1163 Add code to update_config_files() to go through etc_files and update stuff. 1444 Add code to update_config_files() to go through etc_files and update stuff.
1164 Check to see that _etc_files['make.conf'] exists in get_make_conf() 1445 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1165 Only use float() in partition xml parsing code if type == "free" 1446 Only use float() in partition xml parsing code if type == "free"
1166 1447
1167 28 Jun 2005; Preston Cody <codeman@gentoo.org> 1448 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1168 finished almost all internationalization of GenDialog. 1449 finished almost all internationalization of GenDialog.
1169 attempt at fixing rc.conf function. moved 3 generate functions out of 1450 attempt at fixing rc.conf function. moved 3 generate functions out of
1170 fe/gtk/RcDotConf and put them in Utility. fixed self bug. 1451 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1171 added dialog.py to the fe/dialog directory so it actually gets used. 1452 added dialog.py to the fe/dialog directory so it actually gets used.
1172 1453
1173 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1454 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1174 Roll rc_conf and make_conf into master etc_files structure in InstallProfile. 1455 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1175 1456
1176 27 Jun 2005; Preston Cody <codeman@gentoo.org> 1457 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1177 fix extra entry in list_mirrors() 1458 fix extra entry in list_mirrors()
1178 beginning internationalization runthrough. 1459 beginning internationalization runthrough.
1179 1460
1180 26 Jun 2005; Preston Cody <codeman@gentoo.org> 1461 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1181 added dialog.py to /src temporarily until it gets accepted upstream. 1462 added dialog.py to /src temporarily until it gets accepted upstream.
1182 fix for unused value in form in dialog.py and changed heights. 1463 fix for unused value in form in dialog.py and changed heights.
1183 fix GenDialog forms. 1464 fix GenDialog forms.
1184 1465
1185 25 Jun 2005; Preston Cody <codeman@gentoo.org> 1466 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1186 Changed hostname/domainname for new baselayout. 1467 Changed hostname/domainname for new baselayout.
1187 Changed _add_to_runlevel errors to logs. 1468 Changed _add_to_runlevel errors to logs.
1188 Updated TODO list to show status of GenDialog 1469 Updated TODO list to show status of GenDialog
1189 More updates to GenDialog including two checklists that probably won't work. 1470 More updates to GenDialog including two checklists that probably won't work.
1190 update IP to use comma-separated list instead of space separated for services. 1471 update IP to use comma-separated list instead of space separated for services.
1191 1472
1192 24 Jun 2005; Preston Cody <codeman@gentoo.org> 1473 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1193 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to 1474 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1194 GenDialog as it gets closer to completion. 1475 GenDialog as it gets closer to completion.
1195 1476
1196 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1477 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1197 Modify get_eth_info() to take a full interface name (eth0 fex). float() 1478 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1198 instead of int() in add_partition_device_partition() for minor (closes 96804) 1479 instead of int() in add_partition_device_partition() for minor (closes 96804)
1199 1480
1200 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1481 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1201 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"' 1482 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1202 instead of 'interfaces[interface][1]' since DHCP uses that field for its 1483 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1203 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net. 1484 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1204 1485
1205 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1486 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1206 Apply spawn() patch from #96644 (with minor changes). Make sure the return 1487 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1207 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix 1488 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1208 small error with <pipe>.close() returning None. Fix space vs. tab issue. 1489 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1209 Fix undefined variable 'output' issue in spawn(). 1490 Fix undefined variable 'output' issue in spawn().
1210 1491
1211 20 Jun 2005; Preston Cody <codeman@gentoo.org> 1492 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1212 More updates to GenDialog and gli-d. 1493 More updates to GenDialog and gli-d.
1213 1494
1214 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1495 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1215 Modify list_mirrors() to return a list of mirror URL/name pairs. 1496 Modify list_mirrors() to return a list of mirror URL/name pairs.
1216 1497
1217 19 Jun 2005; Preston Cody <codeman@gentoo.org> 1498 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1218 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to 1499 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1219 get subarch. 1500 get subarch.
1220 1501
1221 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1502 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1222 Backend partitioning will create disklabel is none exists. Installprofile 1503 Backend partitioning will create disklabel is none exists. Installprofile
1223 defaults to "" now instead of "msdos" for disklabel type. Fix for 1504 defaults to "" now instead of "msdos" for disklabel type. Fix for
1224 mount_local_partitions() to remember device along with minor in the 1505 mount_local_partitions() to remember device along with minor in the
1225 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and 1506 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1226 add else block to log unsupported netmount types to mount_network_shares() 1507 add else block to log unsupported netmount types to mount_network_shares()
1227 1508
1228 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1509 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1229 src/GLIArchitectureTemplate.py: 1510 src/GLIArchitectureTemplate.py:
1230 Refactor kernel_compile common stuff, fix 2.4 build process. 1511 Refactor kernel_compile common stuff, fix 2.4 build process.
1231 src/fe/cli/clife.py: 1512 src/fe/cli/clife.py:
1232 Logging system. 1513 Logging system.
1233 src/GLIUtility.py, src/GLIStorageDevice.py: 1514 src/GLIUtility.py, src/GLIStorageDevice.py:
1234 Add comments about re-writes needed for boxes without sysfs. 1515 Add comments about re-writes needed for boxes without sysfs.
1235 1516
1236 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1517 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1237 src/GLIArchitectureTemplate.py: 1518 src/GLIArchitectureTemplate.py:
1238 2.4 support (pull version data from /usr/src/linux/Makefile), incl. 1519 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1239 'make dep' call for custom compile. build_mode support for prepare-only and 1520 'make dep' call for custom compile. build_mode support for prepare-only and
1240 none types completed. custom compile function chains shell functions in 1521 none types completed. custom compile function chains shell functions in
1241 spawned script, to allow for catching all errors. 1522 spawned script, to allow for catching all errors.
1242 1523
1243 15 Jun 2005; Preston Cody <codeman@gentoo.org> 1524 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1244 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe 1525 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1245 and GenDialog. other gendialog updates as well. kernel updates untested. 1526 and GenDialog. other gendialog updates as well. kernel updates untested.
1246 1527
1247 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1528 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1248 src/GLIInstallProfile.py: 1529 src/GLIInstallProfile.py:
1249 Change structure of etc-portage stuff. The serialization was broken before my 1530 Change structure of etc-portage stuff. The serialization was broken before my
1250 last commit, and I am the only person that's ever used it. The new schema is 1531 last commit, and I am the only person that's ever used it. The new schema is
1251 as follows: 1532 as follows:
1252 <etc-portage> 1533 <etc-portage>
1263 </entry> 1544 </entry>
1264 </file> 1545 </file>
1265 </etc-portage> 1546 </etc-portage>
1266 1547
1267 1548
1268 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1549 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1269 src/GLIInstallProfile.py: 1550 src/GLIInstallProfile.py:
1270 Add new entry for gli-profile/kernel-build-method item. Add missing 1551 Add new entry for gli-profile/kernel-build-method item. Add missing
1271 serialize_etc_portage (temporary). Make serialize_make_conf always print the 1552 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1272 keys in the same order. 1553 keys in the same order.
1273 1554
1274 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1555 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1275 src/GLIArchitectureTemplate.py: 1556 src/GLIArchitectureTemplate.py:
1276 Clean up commenting used by _edit_config(), and fix bug where wrong comment 1557 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1277 was repeatedly appended to make.conf. 1558 was repeatedly appended to make.conf.
1278 1559
1279 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1560 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1281 Put some Linux-2.6 specific code under a if statement. Store list of 1562 Put some Linux-2.6 specific code under a if statement. Store list of
1282 successfully mounted swap device for using swapoff. Add proper error checking 1563 successfully mounted swap device for using swapoff. Add proper error checking
1283 to install_packages and install_filesystem_tools. Fixed namespace conflicts on 1564 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1284 'file'. Clean up some redundant code (thanks to pychecker).' 1565 'file'. Clean up some redundant code (thanks to pychecker).'
1285 1566
1286 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1567 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1287 Fix typos: get_extended() instead of get_extended_partition(). Added 1568 Fix typos: get_extended() instead of get_extended_partition(). Added
1288 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility. 1569 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1289 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync' 1570 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1290 1571
1291 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> 1572 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1292 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed 1573 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1293 in add_network_interface. 1574 in add_network_interface.
1294 1575
1295 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py: 1576 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1577 src/GLIArchitectureTemplate.py:
1296 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any 1578 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1297 usage - this caused a failure for stage1/stage2 previously. swapoff for swap 1579 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1298 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during 1580 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1299 prepare_chroot. 1581 prepare_chroot.
1300 1582
1302 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog, 1584 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1303 +src/fe/installer-gtk: 1585 +src/fe/installer-gtk:
1304 Add new automated CLI frontend. Add scripts that are the intended means to 1586 Add new automated CLI frontend. Add scripts that are the intended means to
1305 use each frontend. 1587 use each frontend.
1306 1588
1307 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1589 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1308 src/GLIClientController.py: 1590 src/GLIClientController.py:
1309 Add null type to network config, for cases where the interface is already up 1591 Add null type to network config, for cases where the interface is already up
1310 and should not be touched (netboot for example). 1592 and should not be touched (netboot for example).
1311 1593
1312 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1594 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1313 src/GLIArchitectureTemplate.py: 1595 src/GLIArchitectureTemplate.py:
1314 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a 1596 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1315 string!. Try to use binary packages if available by default. 1597 string!. Try to use binary packages if available by default.
1316 1598
1317 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1599 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1318 src/GLIArchitectureTemplate.py: 1600 src/GLIArchitectureTemplate.py:
1319 More error checking for _add_to_runlevel, to ensure that the init script 1601 More error checking for _add_to_runlevel, to ensure that the init script
1320 actually exists before we try to add it. set_services phase must take place 1602 actually exists before we try to add it. set_services phase must take place
1321 after the package installation, otherwise the init scripts might not exist. 1603 after the package installation, otherwise the init scripts might not exist.
1322 Find the correct init script for the cron and logging daemons, and add that 1604 Find the correct init script for the cron and logging daemons, and add that
1323 instead of the package atom. 1605 instead of the package atom.
1324 1606
1325 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1607 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1326 src/GLIArchitectureTemplate.py: 1608 src/GLIArchitectureTemplate.py:
1327 Fix up _edit_config so that it works if the file doesn't already exist. Fix 1609 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1328 usage of 'file' to 'contents' for the variable name, as it shadows 1610 usage of 'file' to 'contents' for the variable name, as it shadows
1329 __builtin__.file. 1611 __builtin__.file.
1330 1612
1331 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1613 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1332 src/GLIArchitectureTemplate.py: 1614 src/GLIArchitectureTemplate.py:
1333 Add MTA install code, and include MTA install phase. Ensure 1615 Add MTA install code, and include MTA install phase. Ensure
1334 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support 1616 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1335 for 'none' kernel config for build_kernel phase. Put kernel_script in 1617 for 'none' kernel config for build_kernel phase. Put kernel_script in
1336 /var/tmp instead of /root for build_kernel phase. 1618 /var/tmp instead of /root for build_kernel phase.
1337 1619
1338 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py: 1620 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1339 Rename mta variables to match syslog/cron variables. 1621 Rename mta variables to match syslog/cron variables.
1340 1622
1341 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1623 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1342 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py, 1624 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1343 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore, 1625 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1344 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore, 1626 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1345 src/templates/.cvsignore, src/tests/.cvsignore: 1627 src/templates/.cvsignore, src/tests/.cvsignore:
1346 Refactor partition formatting again to include error checking. Allow 'none' 1628 Refactor partition formatting again to include error checking. Allow 'none'
1347 for kernel and bootloader specifications. Add .cvsignore files for .py[co]. 1629 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1348 1630
1349 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1631 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1350 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py: 1632 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1351 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to 1633 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1352 only have a single spawn call. 1634 only have a single spawn call.
1353 1635
1354 11 Jun 2005; Preston Cody <codeman@gentoo.org> 1636 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1355 refixed samyron's fix of set_architecture_template. 1637 refixed samyron's fix of set_architecture_template.
1356 1638
1357 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1639 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1358 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always 1640 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1359 be executable. 1641 be executable.
1360 1642
1361 10 Jun 2005; Scott Myron <samyron@gentoo.org> 1643 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1362 Fixed one of the FIXME's in the ClientConfiguration. There is now some 1644 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1363 error checking when you call set_architecture_template. 1645 error checking when you call set_architecture_template.
1364 1646
1365 10 Jun 2005; Preston Cody <codeman@gentoo.org> 1647 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1366 moved the mkfsopts input to the partition options menu instead of the during 1648 moved the mkfsopts input to the partition options menu instead of the during
1367 the creation process. updated GenDialog to say it supports reiserfs v3. 1649 the creation process. updated GenDialog to say it supports reiserfs v3.
1368 1650
1369 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py, 1651 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1370 src/GLIStorageDevice.py, fe/dialog/dialogfe.py: 1652 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1371 Complete support for 'mkfsopts' parameter in main system and dialogfe. 1653 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1372 Add support for other partition types to dialogfe. 1654 Add support for other partition types to dialogfe.
1373 Fix all usages of int(possible_big_number) to long(possible_bit_number) to 1655 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1374 avoid integer overflows and wraparounds. 1656 avoid integer overflows and wraparounds.
1375 1657
1376 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1658 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1377 Removed start/end from XML output and added mkfsopts to partitioning info. 1659 Removed start/end from XML output and added mkfsopts to partitioning info.
1378 'mkfsopts' parameter is now used and support for creating xfs, jfs, and 1660 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1379 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser' 1661 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1380 in GLIClientConfiguration. Change from .1 and .9 to constants for 1662 in GLIClientConfiguration. Change from .1 and .9 to constants for
1381 partitioning. Fix free space overwriting bug. Remove a few unused functions 1663 partitioning. Fix free space overwriting bug. Remove a few unused functions
1382 from rewrite. Fix call to get_partition_at() 1664 from rewrite. Fix call to get_partition_at()
1383 1665
1384 8 Jun 2005; Preston Cody <codeman@gentoo.org> 1666 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1385 Updates to GenDialog and dialogfe. 1667 Updates to GenDialog and dialogfe.
1386 1668
1387 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1669 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1388 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker 1670 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1389 1671
1390 6 Jun 2005; Preston Cody <codeman@gentoo.org> 1672 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1391 more GenDialog updates to partitioning. 1673 more GenDialog updates to partitioning.
1392 1674
1393 5 Jun 2005; Preston Cody <codeman@gentoo.org> 1675 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1394 Indenting issue in GLISD/get_ordered_partition_list. 1676 Indenting issue in GLISD/get_ordered_partition_list.
1395 updates to GenDialog partitioning and added default UTC for timezone in IP. 1677 updates to GenDialog partitioning and added default UTC for timezone in IP.
1396 1678
1397 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1679 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1398 Added GLISD.get_model() 1680 Added GLISD.get_model()
1399 1681
1400 3 Jun 2005; Preston Cody <codeman@gentoo.org> 1682 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1401 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version. 1683 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1402 More updates to GenDialog :) 1684 More updates to GenDialog :)
1403 1685
1404 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1686 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1405 Added get_interface_realname() function. 1687 Added get_interface_realname() function.
1406 1688
1407 2 Jun 2005; Preston Cody <codeman@gentoo.org> 1689 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1408 Added auto-save of CConfig and copying to new /root after install. 1690 Added auto-save of CConfig and copying to new /root after install.
1409 yet even more GenDialog updates. 1691 yet even more GenDialog updates.
1410 1692
1411 1 Jun 2005; Preston Cody <codeman@gentoo.org> 1693 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1412 removed print statement from GLISD. more updates to GenDialog. 1694 removed print statement from GLISD. more updates to GenDialog.
1413 1695
1414 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1696 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1415 Not being able to fetch the stage tarball is now an exception. Chroot wrapper 1697 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1416 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be 1698 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1417 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few 1699 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1418 places in GLIClientConfiguration. 1700 places in GLIClientConfiguration.
1419 1701
1420 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1702 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1421 Fix mount_local_partitions(), configure_fstab(), and 1703 Fix mount_local_partitions(), configure_fstab(), and
1422 install_filesystem_tools() to use GLISD directly. A few more fixes for same. 1704 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1423 A few more fixes for templates/x86Archtemplate 1705 A few more fixes for templates/x86Archtemplate
1424 1706
1425 27 May 2005; Preston Cody <codeman@gentoo.org> 1707 27 May 2005; Preston Cody <codeman@gentoo.org> :
1426 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still 1708 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1427 a work in progress. 1709 a work in progress.
1428 1710
1429 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1711 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1430 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD 1712 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1431 directly. GLISD can now handle data imported from XML. 1713 directly. GLISD can now handle data imported from XML.
1432 1714
1433 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1715 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1434 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to 1716 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1435 handle blank (no disklabel) disks. 1717 handle blank (no disklabel) disks.
1436 1718
1437 20 May 2005; Preston Cody <codeman@gentoo.org> 1719 20 May 2005; Preston Cody <codeman@gentoo.org> :
1438 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned 1720 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1439 up, documented, and separated out serialization and grouped all sections. 1721 up, documented, and separated out serialization and grouped all sections.
1440 1722
1441 19 May 2005; Preston Cody <codeman@gentoo.org> 1723 19 May 2005; Preston Cody <codeman@gentoo.org> :
1442 Reorganization of ClientConfiguration and gutting of unused functions. 1724 Reorganization of ClientConfiguration and gutting of unused functions.
1443 Removed verbose option from CC. Moved import statement in IP and CConfig up. 1725 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1444 1726
1445 18 May 2005; Preston Cody <codeman@gentoo.org> 1727 18 May 2005; Preston Cody <codeman@gentoo.org> :
1446 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup 1728 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1447 1729
1448 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1730 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1449 Fixed bug in finishing_cleanup(). Fix a late-night coding error in 1731 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1450 partitioning. CC serializes install profile to disk and prepare_chroot() 1732 partitioning. CC serializes install profile to disk and prepare_chroot()
1451 copies it into /mnt/gentoo/root 1733 copies it into /mnt/gentoo/root
1452 1734
1453 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1735 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1454 Moved URI parsing into new function parse_uri() 1736 Moved URI parsing into new function parse_uri()
1455 1737
1456 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1738 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1457 Added XMLParser module. 1739 Added XMLParser module.
1458 1740
1459 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1741 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1460 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI. 1742 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1461 Minor fix to is_uri() regex to allow hyphens in hostname. 1743 Minor fix to is_uri() regex to allow hyphens in hostname.
1462 1744
1463 12 May 2005; Preston Cody <codeman@gentoo.org> 1745 12 May 2005; Preston Cody <codeman@gentoo.org> :
1464 Updated finishing_cleanup for new unmounting method from agaffney. 1746 Updated finishing_cleanup for new unmounting method from agaffney.
1465 1747
1466 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1748 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1467 Fix GLILogger to use correct time format string. Fix _edit_config() to 1749 Fix GLILogger to use correct time format string. Fix _edit_config() to
1468 properly comment out variables. Fix minor bug in finishing_cleanup(). Add 1750 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1469 unicode support to is_realstring(). 1751 unicode support to is_realstring().
1470 1752
1471 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1753 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1472 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero 1754 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1473 return value instead of non-zero. Add code to output a traceback to the 1755 return value instead of non-zero. Add code to output a traceback to the
1474 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes 1756 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1475 instead of --nocolor. 1757 instead of --nocolor.
1476 1758
1477 10 May 2005; Preston Cody <codeman@gentoo.org> 1759 10 May 2005; Preston Cody <codeman@gentoo.org> :
1478 Added GLIGenDialog.py to make a generic class for the dialog functions that 1760 Added GLIGenDialog.py to make a generic class for the dialog functions that
1479 can be used by both dialogfe and the netfe/be. updated both for new filename. 1761 can be used by both dialogfe and the netfe/be. updated both for new filename.
1480 date changes. 2004->2005. 1762 date changes. 2004->2005.
1481 1763
1482 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1764 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1483 Removed 'quiet=True' from spawn() calls 1765 Removed 'quiet=True' from spawn() calls
1484 1766
1485 10 May 2005; Preston Cody <codeman@gentoo.org> 1767 10 May 2005; Preston Cody <codeman@gentoo.org> :
1486 Updated GLIUtility with patches from chotchki. Also added documentation 1768 Updated GLIUtility with patches from chotchki. Also added documentation
1487 1769
1488 9 May 2005; Preston Cody <codeman@gentoo.org> 1770 9 May 2005; Preston Cody <codeman@gentoo.org> :
1489 Added the function for set_etc_portage to ArchTemplate. no step for it yet. 1771 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1490 Updated _edit_config in ArchTemplate, make_config, and various other fixes 1772 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1491 from bug #89683, mostly touchups. 1773 from bug #89683, mostly touchups.
1492 1774
1493 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1775 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1494 GLIStorageDevice cleanup patch from bug #91761 1776 GLIStorageDevice cleanup patch from bug #91761
1495 1777
1496 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1778 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1497 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix 1779 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1498 _edit_config(). Error logging casts 'error' to str 1780 _edit_config(). Error logging casts 'error' to str
1499 1781
1500 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1782 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1501 Exceptions received in CC are logged before being passed to the FE. Added 1783 Exceptions received in CC are logged before being passed to the FE. Added
1502 code to CC to handle exceptions *not* thrown by the installer itself. 1784 code to CC to handle exceptions *not* thrown by the installer itself.
1503 1785
1504 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1786 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1505 get_max_mb_for_resize() returns -1 if not self.resizeable 1787 get_max_mb_for_resize() returns -1 if not self.resizeable
1506 1788
1507 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1789 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1508 More dirty rsync hacks :-/ 1790 More dirty rsync hacks :-/
1509 1791
1510 29 Apr 2005; Preston Cody <codeman@gentoo.org> 1792 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1511 Patches from chotchki (bug #90325) to improve CC networking. untested. 1793 Patches from chotchki (bug #90325) to improve CC networking. untested.
1512 1794
1513 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1795 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1514 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in 1796 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1515 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split 1797 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1516 'custom' sync option into 'none' and 'snapshot'. Minor fixes to 1798 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1517 GLIStorageDevice as suggested by pychecker. Fix minor bug in 1799 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1518 _get_packages_to_emerge(). Fix _quickpkg_deps() to call 1800 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1519 _get_packages_to_emerge() 1801 _get_packages_to_emerge()
1520 1802
1521 28 Apr 2005; Preston Cody <codeman@gentoo.org> 1803 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1522 Added group-adding code to set_users in ArchTemplate 1804 Added group-adding code to set_users in ArchTemplate
1523 1805
1524 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1806 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1525 Added post-install script code 1807 Added post-install script code
1526 1808
1527 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1809 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1528 Fixed encapsulation issues in GLIClientController (bug #90141) 1810 Fixed encapsulation issues in GLIClientController (bug #90141)
1529 1811
1530 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1812 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1531 Update resizing code in GLIStorageDevice 1813 Update resizing code in GLIStorageDevice
1532 1814
1533 17 Apr 2005; Preston Cody <codeman@gentoo.org> 1815 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1534 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger. 1816 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1535 1817
1536 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1818 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1537 Reverted change to ArchTemplate and added support for commented line in old 1819 Reverted change to ArchTemplate and added support for commented line in old
1538 code. 1820 code.
1539 1821
1540 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1822 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1541 Changed _edit_config() to modify value in-place instead of commenting out and 1823 Changed _edit_config() to modify value in-place instead of commenting out and
1542 adding the new value to the end of the file. 1824 adding the new value to the end of the file.
1543 1825
1544 15 Apr 2005; Preston Cody <codeman@gentoo.org> 1826 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1545 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration. 1827 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1546 Also updated TODO list. 1828 Also updated TODO list.
1547 1829
1548 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1830 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1549 Use blackace's one-liner to add comments for all function for use with 1831 Use blackace's one-liner to add comments for all function for use with
1550 pythondoc. 1832 pythondoc.
1551 1833
1552 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1834 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1553 Moved 'end >= device_sectors' check out of loop to check for next partition's 1835 Moved 'end >= device_sectors' check out of loop to check for next partition's
1554 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86. 1836 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1555 Partitioning code now tracks start/end of extended for placing logicals. End 1837 Partitioning code now tracks start/end of extended for placing logicals. End
1556 point of logical is now adjusted along with start. 1838 point of logical is now adjusted along with start.
1557 1839
1558 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1840 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1559 Finish overhaul of backend partitioning code. Fixed all bugs that stood in 1841 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1560 the way of partitioning from a blank disk. Add int() around access to minor 1842 the way of partitioning from a blank disk. Add int() around access to minor
1561 key in partition information due to new partition code leaving them as float. 1843 key in partition information due to new partition code leaving them as float.
1562 1844
1563 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1845 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1564 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code 1846 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1565 1847
1566 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1848 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1567 Major GLIStorageDevice overhaul...all MB now instead of sectors. 1849 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1568 1850
1569 8 Apr 2005; Scott Myron <samyron@gentoo.org> 1851 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1570 Added support for DHCP options and MAC addresses in the InstallProfile. 1852 Added support for DHCP options and MAC addresses in the InstallProfile.
1571 1853
1572 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1854 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1573 Changed mountopts check to work for blank and whitespace. Pipe emerge through 1855 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1574 sed to properly strip out junk. 1856 sed to properly strip out junk.
1575 1857
1576 2 Apr 2005; Preston Cody <codeman@gentoo.org> 1858 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1577 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel 1859 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1578 added --emptytree to stage2. fixed ethx not being added to runlevel defalt. 1860 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1579 1861
1580 31 Mar 2005; Preston Cody <codeman@gentoo.org> 1862 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1581 Fixed indent problem in GLICController 1863 Fixed indent problem in GLICController
1582 1864
1583 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1865 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1584 Check for disklabel type "loop" and use the device name without a minor. 1866 Check for disklabel type "loop" and use the device name without a minor.
1585 1867
1586 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1868 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1587 Remove /tmp/compile_output.log and /var/log/install.log when install is 1869 Remove /tmp/compile_output.log and /var/log/install.log when install is
1588 complete. Added code to (hopefully) keep 2nd thread running after install. 1870 complete. Added code to (hopefully) keep 2nd thread running after install.
1589 Patch from zahna for extra arguments to the kernel. Patch from zahna to add 1871 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1590 get_eth_info() function. Remove most of content in amd64ArchTemplate and 1872 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1591 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args 1873 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1592 1874
1593 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1875 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1594 Added 'append_log=True' to all spawn() calls using logfile=. Append to log 1876 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1595 when unpacking tarball. 1877 when unpacking tarball.
1596 1878
1597 28 Mar 2005; Preston Cody <codeman@gentoo.org> 1879 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1598 rewrote filesystem_tools. looks like it works so ripping out all the old 1880 rewrote filesystem_tools. looks like it works so ripping out all the old
1599 filesystem_tools code. 1881 filesystem_tools code.
1600 1882
1601 26 Mar 2005; Preston Cody <codeman@gentoo.org> 1883 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1602 Changed the print statements to logging in the partitioning BE code. 1884 Changed the print statements to logging in the partitioning BE code.
1603 the logger may need to be imported to the x86archtemplate. unknown yet. 1885 the logger may need to be imported to the x86archtemplate. unknown yet.
1604 Added the finishing_cleanup function. 1886 Added the finishing_cleanup function.
1605 added a fix to the logger from BenUrban 1887 added a fix to the logger from BenUrban
1606 1888
1607 25 Mar 2005; Preston Cody <codeman@gentoo.org> 1889 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1608 changed InstallProfile to remove is_uri check on kernel, stage, and portage 1890 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1609 URIs. The blank uri check has been commented out. 1891 URIs. The blank uri check has been commented out.
1610 ripped out error checking of set_services. this is done by _add_to_runlevel. 1892 ripped out error checking of set_services. this is done by _add_to_runlevel.
1611 1893
1612 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1894 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1613 set_stage_tarball_uri() doesn't raise an exception on a blank string. 1895 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1614 1896
1615 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1897 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1616 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1898 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1617 the install profile if available. Commented out spawn() debugging prints 1899 the install profile if available. Commented out spawn() debugging prints
1618 1900
1619 23 Mar 2005; Preston Cody <codeman@gentoo.org> 1901 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1620 small changes to setup_network_post. moved adding to runlevel of net.x to 1902 small changes to setup_network_post. moved adding to runlevel of net.x to
1621 after the device gets symlinked. added domainname runlevel command. 1903 after the device gets symlinked. added domainname runlevel command.
1622 1904
1623 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1905 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1624 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in 1906 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1625 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to 1907 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1626 spawn() call in livecd-kernel code to pass environment variables. 1908 spawn() call in livecd-kernel code to pass environment variables.
1627 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1909 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1628 the install profile if available. 1910 the install profile if available.
1629 1911
1630 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1912 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1631 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate 1913 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1632 to handle installing the livecd kernel into the new system. 1914 to handle installing the livecd kernel into the new system.
1633 1915
1634 22 Mar 2005; Preston Cody <codeman@gentoo.org> 1916 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1635 should emerge hotplug and coldplug before adding them to runlevel. 1917 should emerge hotplug and coldplug before adding them to runlevel.
1636 1918
1637 21 Mar 2005; Preston Cody <codeman@gentoo.org> 1919 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1638 took chroot out of grub_install command. 1920 took chroot out of grub_install command.
1639 1921
1640 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1922 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1641 Changed chroot wrapper code in spawn() to write the wrapper the python way 1923 Changed chroot wrapper code in spawn() to write the wrapper the python way
1642 instead of the bash way to avoid quote conflicts. Added 1924 instead of the bash way to avoid quote conflicts. Added
1643 'logfile=self._compile_logfile' to a number of spawn() calls. Added new 1925 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1644 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh' 1926 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1645 as it breaks the piping. 1927 as it breaks the piping.
1646 1928
1647 20 Mar 2005; Preston Cody <codeman@gentoo.org> 1929 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1648 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo. 1930 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1649 1931
1650 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1932 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1651 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in 1933 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1652 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and 1934 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1653 GLIInstallProfile. 1935 GLIInstallProfile.
1654 1936
1655 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1937 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1656 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs 1938 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1657 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved 1939 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1658 into /mnt/gentoo in prepare_chroot() 1940 into /mnt/gentoo in prepare_chroot()
1659 1941
1660 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1942 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1661 Add sigunmask.c contributed by d_m (on freenode) to counteract python's 1943 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1662 retarted behavior regarding threads and signals. Add code to convert MB/%/* 1944 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1663 to start/end sectors 1945 to start/end sectors
1664 1946
1665 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1947 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1666 Add 2>&1 to cmd in spawn() 1948 Add 2>&1 to cmd in spawn()
1667 1949
1668 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1950 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1669 Modified GLIUtility.exitsuccess() to work with return value from 1951 Modified GLIUtility.exitsuccess() to work with return value from
1670 commands.getstatusoutput instead of os.waitpid(). spawn() automatically 1952 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1671 creates wrapper script for commands run inside chroot so multiple commands 1953 creates wrapper script for commands run inside chroot so multiple commands
1672 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x' 1954 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1673 for the generated script from spawn() 1955 for the generated script from spawn()
1674 1956
1675 16 Mar 2005; Preston Cody <codeman@gentoo.org> 1957 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1676 Removed default values for stage tarball URI and portage tree URI from 1958 Removed default values for stage tarball URI and portage tree URI from
1677 InstallProfile. These should be set by the FEs. also added services step to 1959 InstallProfile. These should be set by the FEs. also added services step to
1678 ArchTemplate and coldplug/hotplug runlevels to the genkernel step. 1960 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1679 Possibly fixed CC DHCP bug with -n. (thx agaffney) 1961 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1680 1962
1681 14 Mar 2005; Preston Cody <codeman@gentoo.org> 1963 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1682 Small fix for setting the default gateway. Also added feature to dialogfe. 1964 Small fix for setting the default gateway. Also added feature to dialogfe.
1683 1965
1684 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1966 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1685 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid 1967 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1686 1968
1687 1 Mar 2005; Preston Cody <codeman@gentoo.org> 1969 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1688 Fixed a bunch of true -> True typos. lots of em 1970 Fixed a bunch of true -> True typos. lots of em
1689 only write new resolv.conf if there are dns servers listed. 1971 only write new resolv.conf if there are dns servers listed.
1690 1972
1691 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1973 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1692 Commented out 'display_on_tty8=True' in start_portmap() 1974 Commented out 'display_on_tty8=True' in start_portmap()
1693 1975
1694 18 Feb 2005; Preston Cody <codeman@gentoo.org> 1976 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1695 added progress bar to dialogfe and fix logger bug in ArchTemplate. 1977 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1696 1978
1697 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1979 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1698 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved 1980 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1699 lang parameter to __init__() 1981 lang parameter to __init__()
1700 1982
1701 10 Feb 2005; Preston Cody <codeman@gentoo.org> 1983 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1702 updates to TODO list. 1984 updates to TODO list.
1703 1985
1704 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1986 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1705 Initial code for quickpkg GRP support. Fix loop to grab packages from 1987 Initial code for quickpkg GRP support. Fix loop to grab packages from
1706 'emerge -p blah' 1988 'emerge -p blah'
1707 1989
1708 6 Feb 2005; Preston Cody <codeman@gentoo.org> 1990 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1709 check for dhcp in the network stuff and emerge it if it is. 1991 check for dhcp in the network stuff and emerge it if it is.
1710 added quickpkg to TODO list 1992 added quickpkg to TODO list
1711 1993
1712 5 Feb 2005; Preston Cody <codeman@gentoo.org> 1994 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1713 Changed the raising of 'warning' exceptions to a simple log of the error 1995 Changed the raising of 'warning' exceptions to a simple log of the error
1714 so that the installer can continue. 1996 so that the installer can continue.
1715 1997
1716 3 Feb 2005; Preston Cody <codeman@gentoo.org> 1998 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1717 Some big changes. First, changed most output to display_on_tty8. 1999 Some big changes. First, changed most output to display_on_tty8.
1718 Second, added log lines to all templates. Some smaller fixes such as typos. 2000 Second, added log lines to all templates. Some smaller fixes such as typos.
1719 Also did some cleanups of old commented lines. 2001 Also did some cleanups of old commented lines.
1720 2002
1721 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 2003 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1722 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban. 2004 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1723 Undo change with fix. Escaping fix in GLIStorageDevice.py 2005 Undo change with fix. Escaping fix in GLIStorageDevice.py
1724 2006
1725 31 Jan 2005; Preston Cody <codeman@gentoo.org> 2007 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1726 more updates to TODO list. hopefully we'll soon start removing items instead 2008 more updates to TODO list. hopefully we'll soon start removing items instead
1727 of adding them. 2009 of adding them.
1728 2010
1729 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2011 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1730 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works 2012 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1731 2013
1732 27 Jan 2005; Preston Cody <codeman@gentoo.org> 2014 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1733 updated TODO list. (again) 2015 updated TODO list. (again)
1734 2016
1735 25 Jan 2005; Preston Cody <codeman@gentoo.org> 2017 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1736 changed output of portmap start to display_on_tty8. 2018 changed output of portmap start to display_on_tty8.
1737 fixed bootloader for udev and multiple kernels 2019 fixed bootloader for udev and multiple kernels
1738 fixed custom kernel config (again) 2020 fixed custom kernel config (again)
1739 2021
1740 22 Jan 2005; Preston Cody <codeman@gentoo.org> 2022 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1741 changed default value of CC._enable_ssh to True because this is smart. 2023 changed default value of CC._enable_ssh to True because this is smart.
1742 added code to allow custom kernel .config. may be unstable and break. sorry. 2024 added code to allow custom kernel .config. may be unstable and break. sorry.
1743 2025
1744 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2026 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1745 partition() now waits until after it checks for partition flags before delete 2027 partition() now waits until after it checks for partition flags before delete
1746 the partitions :P 2028 the partitions :P
1747 2029
1748 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2030 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1749 Updated TODO. swapon failure it temporarily not an error. swapon is an error 2031 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1750 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't 2032 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1751 blank. 2033 blank.
1752 2034
1753 19 Jan 2005; Preston Cody <codeman@gentoo.org> 2035 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1754 Various fixes related to the add_users function. Still not yet finished. 2036 Various fixes related to the add_users function. Still not yet finished.
1755 Added things to the TODO list. Lets start using that! 2037 Added things to the TODO list. Lets start using that!
1756 2038
1757 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2039 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1758 Added code to x86Template to format newly created partitions. Also added 2040 Added code to x86Template to format newly created partitions. Also added
1759 some error checking code. GLIStorageDevice passes 'minor' with data to 2041 some error checking code. GLIStorageDevice passes 'minor' with data to
1760 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS 2042 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1761 mounting code. 2043 mounting code.
1762 2044
1763 18 Jan 2005; Preston Cody <codeman@gentoo.org> 2045 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1764 Took out unnecessary setting of random livecd root password. the cd already 2046 Took out unnecessary setting of random livecd root password. the cd already
1765 sets it randomly. 2047 sets it randomly.
1766 2048
1767 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2049 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1768 Took out an unneeded step from CC's run() 2050 Took out an unneeded step from CC's run()
1769 2051
1770 15 Jan 2005; Preston Cody <codeman@gentoo.org> 2052 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1771 Attempt at detecting and adding windows partitions to lilo. 2053 Attempt at detecting and adding windows partitions to lilo.
1772 2054
1773 14 Jan 2005; Preston Cody <codeman@gentoo.org> 2055 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1774 Added lilo code and cleaned up lilo code. also do_partitioning renamed to 2056 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1775 partition. fixed misc exit_status => exitstatus typo. 2057 partition. fixed misc exit_status => exitstatus typo.
1776 2058
1777 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2059 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1778 Added basic code for resizing filesystems with pyparted. Fixed code for 2060 Added basic code for resizing filesystems with pyparted. Fixed code for
1779 resizing ntfs and ext2/3. 2061 resizing ntfs and ext2/3.
1780 2062
1781 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2063 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1782 Fixed partition() in x86Template so that it scans through logicals and deletes 2064 Fixed partition() in x86Template so that it scans through logicals and deletes
1783 before deleting containing extended partition. Also clears partition table to 2065 before deleting containing extended partition. Also clears partition table to
1784 be safe before third pass. 2066 be safe before third pass.
1785 2067
1786 08 Jan 2005; Preston Cody <codeman@gentoo.org> 2068 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1787 Added mount_network_shares. not able to test it from this computer. 2069 Added mount_network_shares. not able to test it from this computer.
1788 will test when i get back to school. 2070 will test when i get back to school.
1789 also added start_portmap to the client_controller as an always-do. 2071 also added start_portmap to the client_controller as an always-do.
1790 agaffney says this is needed for NFS mounts to work. 2072 agaffney says this is needed for NFS mounts to work.
1791 2073
1792 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2074 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1793 Partial rewrite of partitioning code in x86Template. No longer shells out to 2075 Partial rewrite of partitioning code in x86Template. No longer shells out to
1794 parted to perform actions, now uses all pyparted calls. Code "works" in a 2076 parted to perform actions, now uses all pyparted calls. Code "works" in a
1795 test, but still needs lots of TLC. Also modified tests/install.py to work 2077 test, but still needs lots of TLC. Also modified tests/install.py to work
1796 with x86Template and GLIClientConfiguration. 2078 with x86Template and GLIClientConfiguration.
1797 2079
1798 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2080 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1799 Initial move of partitioning code from ArchTemplate to x86Template. 2081 Initial move of partitioning code from ArchTemplate to x86Template.
1800 2082
1801 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2083 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1802 Added grp_install and services to InstallProfile. forgot about the set_root_password 2084 Added grp_install and services to InstallProfile. forgot about the set_root_password
1803 2085
1804 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2086 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1805 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney. 2087 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1806 Test Install ran very well (skipping partitioning). 2088 agaffney. Test Install ran very well (skipping partitioning).
1807 2089
1808 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2090 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1809 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot 2091 My mid-day update. rewrote mount_local_partitions for order of mounting.
1810 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs. 2092 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1811 some may still have eluded me. 2093 partition format. fixed a few _edit_configs. some may still have eluded me.
1812 2094
1813 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2095 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1814 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it. 2096 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
2097 to test it.
1815 Just finished mount_local_partitions in GLIArchitectureTemplate 2098 Just finished mount_local_partitions in GLIArchitectureTemplate
1816 2099
1817 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2100 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1818 Added get_num_sectors() to GLIStorageDevice. 2101 Added get_num_sectors() to GLIStorageDevice.
1819 2102
1820 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2103 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1821 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders. 2104 GLIStorageDevice now tracks partition boundaries in sectors instead of
2105 cylinders.
1822 Also now ignores <=100 sectors for free space. Removed remaining depends stuff 2106 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1823 from GLIInstallProfile. 2107 from GLIInstallProfile.
1824 2108
1825 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2109 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1826 GLIStorageDevice returns "unknown" instead of "" for get_type() 2110 GLIStorageDevice returns "unknown" instead of "" for get_type()
1827 2111
1828 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2112 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1829 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to 2113 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1830 actually work. Commented out resizability checking code for speed. 2114 actually work. Commented out resizability checking code for speed.
1831 2115
1832 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2116 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1833 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in 2117 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1834 GLIStorageDevice at the suggestion of plors 2118 in GLIStorageDevice at the suggestion of plors
1835 2119
1836 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2120 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1837 Added a function to GLIUtility to pull a value from a make.conf-style config 2121 Added a function to GLIUtility to pull a value from a make.conf-style config
1838 file. Minor type fix to GLIInstallProfile.py 2122 file. Minor type fix to GLIInstallProfile.py
1839 2123
1840 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2124 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1841 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated 2125 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1842 network mounts from partition data structure in GLIInstallProfile 2126 Separated network mounts from partition data structure in GLIInstallProfile
1843 2127
1844 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> 2128 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1845 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem 2129 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1846 can be resized. 2130 can be resized.
1847 2131
1848 27 Oct 2004; Preston Cody <codeman@gentoo.org> 2132 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1849 Added some of the final functions to GLIInstallTemplate. 2133 Added some of the final functions to GLIInstallTemplate.
1850 Yes this project is still active despite rare use of the Changelog! 2134 Yes this project is still active despite rare use of the Changelog!
1851 2135
1852 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2136 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1853 Added the GLIPartitionTools.py file. This is a temporary insertion of 2137 Added the GLIPartitionTools.py file. This is a temporary insertion of
1854 partitioning tools that will eventually go into their own package. 2138 partitioning tools that will eventually go into their own package.
1855 2139
1856 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2140 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1857 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time 2141 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1858 for the program). Added __init__(install_profile, client_configuration) to 2142 run-time for the program). Added __init__(install_profile,
1859 GLI.InstallProfile. This sets install_profile and client_configuration once so as 2143 client_configuration) to GLI.InstallProfile. This sets install_profile and
1860 to avoid constantly passing stuff every time we call a method. 2144 client_configuration once so as to avoid constantly passing stuff every time
2145 we call a method.
1861 2146
1862 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2147 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1863 2148
1864 Added another private method to GLI.InstallTemplate. _edit_config() modifies config 2149 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1865 files without messing up all the other stuff in them. This will be used for making 2150 config files without messing up all the other stuff in them. This will be
1866 changes to make.conf, rc.conf, /etc/conf.d/net, etc... 2151 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1867 2152
1868 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2153 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1869 2154
1870 Added GLI.InstallTemplate framework. This is not yet functional. However, it does 2155 Added GLI.InstallTemplate framework. This is not yet functional. However,
1871 have a few basic things. I added two private methods. One is _depends(). This 2156 it does have a few basic things. I added two private methods. One is
1872 will be used for dependency checking (ie. unpacking a tarball requires that 2157 _depends(). This will be used for dependency checking (ie. unpacking a
1873 partitioning has been done). The other is _exec_in_chroot(). This is the exact 2158 tarball requires that partitioning has been done). The other is
1874 same syntax as os.system(), however, instead of being run in the liveCD 2159 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1875 environment, it runs in the chroot. This requires a bit of fork() magic, so I 2160 instead of being run in the liveCD environment, it runs in the chroot. This
1876 isolated the code. Hope to work more this week to get this class formed... 2161 requires a bit of fork() magic, so I isolated the code. Hope to work more
2162 this week to get this class formed...
1877 2163
1878 14 Feb 2004; Eric Sammer <esammer@gentoo.org> 2164 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1879
1880 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for 2165 Added SAX parsing. Made GLI.InstallProfile a subclass of
1881 obvious reasons. Switched kernel_modules and users to be lists instead of tuples 2166 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1882 to allow for easier modification (mutable, rather than immutable objects). Updated 2167 to be lists instead of tuples to allow for easier modification (mutable,
1883 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse(). 2168 rather than immutable objects). Updated existing pydoc and added more.
2169 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1884 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references. 2170 GLI.py a bit. Fixed all accessors to use self references.
1885 Added initial unit test code. 2171 Added initial unit test code.
1886 2172
1887 9 Feb 2004; Eric Sammer <esammer@gentoo.org> 2173 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1888
1889 Added initial changelog. Setting up the basic structure of the CVS repository 2174 Added initial changelog. Setting up the basic structure of the CVS repository
1890 for the project. Added the UML class diagram in docs. Added a skeletal GLI 2175 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1891 python module. Added misc files such news, authors, etc. 2176 python module. Added misc files such news, authors, etc.

Legend:
Removed from v.1470  
changed lines
  Added in v.1893

  ViewVC Help
Powered by ViewVC 1.1.20