/[gli]/trunk/ChangeLog
Gentoo

Diff of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 698 Revision 1895
1# ChangeLog for Gentoo Linux Installer 1# ChangeLog for Gentoo Linux Installer
2# Copyright 2005 Gentoo Technologies, Inc. 2# Copyright 2005-2008 Gentoo Foundation; Distributed under the GPL v2
3# $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.251 2005/06/21 03:11:43 agaffney Exp $ 3# $Id: $
4 4
5 09 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIInstallProfile.py:
7 Add alsa-utils to package list
8
9 07 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> bin/installer-dialog,
10 bin/installer-gtk:
11 Pass on arguments from commandline
12
13 07 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
14 src/fe/gtk/ProgressDialog.py:
15 Truncate progress bar status text at 80 characters
16
17 06 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
18 src/GLIArchitectureTemplate.py:
19 Add checking for non-blank local filesystems after mounting
20
21 06 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
22 src/GLIArchitectureTemplate.py:
23 Update post-install networking config to use newer conf.d/net syntax
24
25 05 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
26 src/GLIArchitectureTemplate.py:
27 run sed on copied make.conf to remove lines that start with ##
28
29 04 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/Partitioning.py:
30 Modify order of extended check in partitioning code so that it works
31
32 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
33 sync dynamic-stage3 code in GLIPortage with GLIArch
34
35 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
36 src/GLIArchitectureTemplate.py:
37 Create /dev/tty1 with dynamic stage3
38
39 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org>
40 src/GLIArchitectureTemplate.py, src/GLIPortage.py,
41 src/fe/dialog/gli-dialog.py:
42 Switch to running vdb_to_fake_binrepo.py instead of reading systempkgs.txt
43 remove all references to systempkgs.txt
44
45 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org> -src/runtimedeps.py,
46 +src/vdb_to_fake_binrepo.py:
47 Add vdb_to_fake_binrepo.py script from the always awesome zmedico
48
49 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
50 force livecd and bindist USE
51
52 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org>
53 src/GLIArchitectureTemplate.py:
54 add in metadata_overlay for faster dep calculation
55
56 26 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
57 src/fe/gtk/ExtraPackages.py:
58 comment out kernelpkgs stuff in gtkfe
59
60 25 Nov 2007; Preston Cody <codeman@gentoo.org>
61 src/fe/dialog/gli-dialog.py:
62 adding commmand-line option for advanced mode which allows full functionality.
63
64 18 Nov 2007; Preston Cody <codeman@gentoo.org>
65 src/fe/dialog/gli-dialog.py:
66 attempting to throw in kernpkgs support. will see how this goes.
67
68 18 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
69 src/fe/gtk/OtherSettings.py:
70 pre-create conf.d/xdm
71
72 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIUtility.py:
73 use proper file name for kernel packages
74
75 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
76 src/fe/gtk/Networking.py:
77 s/install_logger/install_logging_daemon/
78
79 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
80 src/fe/gtk/LocalMounts.py:
81 import GLIUtility
82
83 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/fe/gtk/gtkfe.py:
84 start with Partitioning screen
85
86 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
87 src/fe/gtk/ExtraPackages.py, src/fe/gtk/LocalMounts.py,
88 src/fe/gtk/Networking.py, src/fe/gtk/OtherSettings.py,
89 src/fe/gtk/RootPass.py, src/fe/gtk/Timezone.py, src/fe/gtk/gtkfe.py:
90 rearrange a bit of code for gtkfe networkless-only transition
91
92 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
93 src/GLIUtility:
94 add get_kernpkgs_from_cd() function
95
96 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
97 src/GLIInstallProfile.py:
98 add xdm, gdm, and kdm to package list
99
100 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
101 src/fe/dialog/gli-dialog.py:
102 modify root mountpoint check in gli-dialog to use a for/else and notify the
103 user why they're not being allowed to leave the screen
104
105 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
106 src/templates/x86ArchitectureTemplate.py:
107 move around parentheses to fix bug 179528
108
109 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
110 src/fe/gtk/InstallFailed.py:
111 correct bugzilla location for bug 178144
112
113 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
114 src/GLIArchitectureTemplate.py, src/fe/gtk/gtkfe.py:
115 fix error in debug mode for bug 178475
116 force install_type to networkless for gtkfe
117
118 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
119 src/GLIArchitectureTemplate.py:
120 set TIMEZONE in /etc/conf.d/clock for bug 158882
121
122 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
123 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
124 src/fe/gtk/InstallFailed.py, src/fe/gtk/gtkfe.py:
125 make install log location consistent throughout code
126 'View Log' button in gtkfe now looks for active and failed log
127
128 04 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org>
129 src/GLIInstallProfile.py:
130 Added x11-themes/gentoo-artwork-livecd to the list of extra packages.
131
132 04 Jan 2007; Preston Cody <codeman@gentoo.org>
133 ClientController:
134 took out the preinstall steps. these will now be handled by the frontends.
135 The actual code for the steps can be put in GLIUtility if necessary.
136 IP:
137 Took out partitioning. Added mounts.
138 Moved root mount point over from CF
139 Removed RP-PPPoE. was never used.
140 AT:
141 reordered functions. removed references to the client-config
142 fixed fstab and other locations that used mountpoints to use the new mounts.
143 removed unused rc.conf function.
144 other smaller touchups.
145 gli-dialog:
146 install_profile() to self._install_profile
147 fix reference to arch instaed of self._arch
148 x86AT:
149 fixed code to use mounts instead of partitioning.
150
151 01 Jan 2007; Preston Cody <codeman@gentoo.org>
152 fixing all instances of WINDOWSKEYS to WINDOWKEYS
153 added space in AT debug line.
154 more general updates in an effort to get the code functional
155
156 29 Oct 2006; Preston Cody <codeman@gentoo.org>
157 gli-dialog:
158 more rearranging of code. Tossed the review menu and not calling show_settings
159 not sure how those are going to turn out just yet.
160
161 22 Oct 2006; Andrew Gaffney <agaffney@gentoo.org>
162 src/Partitioning.py:
163 first round of refactoring for Partitioning.py (was GLISD)
164
165 22 Oct 2006; Preston Cody <codeman@gentoo.org>
166 gli-dialog:
167 added in the rest of the code from GLIGenDialog.
168 will start picking at it now.
169 moved the early questions such as advanced_mode/networkless
170 into functions in the GLIDialog class.
171
172 21 Oct 2006; Preston Cody <codeman@gentoo.org>
173 ClientController and gli-dialog and GLIGenDialog:
174 removing GenDialog, this code will be put into gli-dialog
175 moving some ClientController code into gli-dialog as well.
176 this is only the beginning :)
177
178#------------------------------------------
179# GLI SWITCHES TO SVN.
180
181 15 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
182 src/GLIArchitectureTemplate.py:
183 use _wait_for_device_node() any place we were looping and checking before
184
185 13 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
186 src/GLIArchitectureTemplate.py:
187 add _wait_for_device_node()
188 src/GLIPortage.py:
189 raise an exception in get_deps() if pkglist is empty
190 -k option to install livecd-kernel to shut up wolf31o2 :P
191
192 11 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
193 src/GLIArchitectureTemplate.py:
194 break after installing 1 mta in install_mta()
195
196 10 Sep 2006; Preston Cody <codeman@gentoo.org>
197 src/GLIGenDialog.py:
198 rewrote how the USE flags work so that they are written correctly in relation
199 to the system's USE flags.
200 added a while condition on setting a user password
201 src/GLIArchitectureTemplate.py:
202 adding a self._mounted_devices to keep track of mounted partitions.
203 When cleaning up, only unmount these partitions. Not yet tested.
204
205 10 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
206 src/GLIStorageDevice.py:
207 properly identify apple_bootstrap partitions
208
209 9 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
210 src/GLIStorageDevice.py:
211 pay attention to 'ignoredparts' when reading partition table
212
213 3 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
214 src/GLIArchitectureTemplate.py:
215 force conversion of 'mb' to long
216
217 2 Sep 2006; Preston Cody <codeman@gentoo.org>
218 Lots of internationalization fixes. Point to a translation path called
219 languages in the dialog directory. Generated and added .pot files.
220 Added gettext to GLIIP for package descriptions.
221
222 01 Sep 2006; Chris Gianelloni <wolf31o2@gentoo.org>
223 src/GLIInstallProfile.py:
224 Added some more applications to the Extra Packages list.
225
226 1 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
227 src/templates/ppcArchitectureTemplate.py:
228 this doesn't need to inherit from x86AT or create an infinite loop by calling
229 its own __init__()
230 src/GLIArchitectureTemplate.py,src/templates/x86ArchitectureTemplate.py:
231 move partitioning code to GLIAT
232
233 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
234 src/GLIArchitectureTemplate.py:
235 pass quotes_around_value=False when adding default route to conf.d/net
236
237 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
238 src/GLIArchitectureTemplate.py:
239 copy backup custom.conf from livecd if present
240
241*GLI-0.4 (31 Jul 2006)
242
243 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
244 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
245 doing the testing and coming up with the patch.
246
247 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
248 src/GLIArchitectureTemplate.py:
249 skip blank entries/files in update_config_files()
250
251 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
252 src/templates/x86ArchitectureTemplate.py:
253 move logical clipping logic a bit
254
255 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
256 I've commented out most of the code that used launch. It wasn't working and
257 we don't have the time to fix it before the release. I'll look into it after
258 the release and make it more robust and flexible.
259
260 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
261 src/templates/x86ArchitectureTemplate.py:
262 clip logical partition at end of extended
263
264 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
265 src/GLIInstallProfile.py:
266 Added a few more applications to the list of extra packages to be merged,
267 all from various GRP sets.
268
269 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
270 Added launch variable to the end of each try-run with auth, which should
271 cause this to function properly. Of course, more testing is needed.
272
273 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
274 Fix a missed space in the installer script.
275
276 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
277 src/GLIClientConfiguration.py:
278 adding 'None' with capital N so that the frontends can parse the network type
279
280 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
281 src/GLIClientController.py:
282 log version-stamp
283
284 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
285 Updated the installer script to allow specifying the front-end to run from
286 the command line. Currently, it only supports dialog and gtk. It still needs
287 some testing, however.
288
289 9 July 2006; Preston Cody <codeman@gentoo.org>
290 src/GLIGenDialog.py:
291 make lilo only show up for x86 if non-networkless
292
293 25 Jun 2006; Preston Cody <codeman@gentoo.org>
294 src/GLIGenDialog.py:
295 adding code to auto-add doscsi if a scsi drive detected.
296 this code is also in the gtkfe already
297
298 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
299 src/GLIPortage.py:
300 pass proper PORTAGE_TMPDIR
301
302 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
303 src/GLIUtility.py:
304 fix list_mirrors() to ignore <uri> lines that don't end on the same line
305
306 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
307 Added code to the mta step in AT to parse the install packages list and
308 look for mtas and if it finds it emerge it.
309 Initial attempt at moving extra_packages early in the setup to only show
310 local USE flags relating to those packages.
311 .. abandoned local USE project. no right way to do it.
312
313 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
314 src/GLIUtility.py:
315 minor tweak to regex for parsing mirrors.xml
316
317 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
318 src/templates/x86ArchitectureTemplate.py:
319 make use of strict_start and strict_end in partition recreation
320
321 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
322 src/templates/x86ArchitectureTemplate.py:
323 add strict_start and strict_end parameters to _add_partition()
324 add _find_current_minor_for_part() function to help with resizing
325 fix logical/extended logic in _partition_delete_step()
326 in _partition_resize_step(), delete, recreate at new size, resize, delete
327 call resize2fs with no size argument so it fills entire partition
328 more logging
329 only delete, recreate, resize, delete if growing
330 pass new size to resize2fs in K
331
332 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
333 src/GLIStorageDevice.py:
334 call reorder_minors() from tidy_partitions() instead of
335 set_partitions_from_disk()
336 add code to reorder_minors() to take extended/logical into consideration with
337 non-free partitions
338
339 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
340 added a check of the length of the directory in /usr/src if under 6 characters
341 should fix bug 131809
342
343 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
344 src/GLIArchitectureTemplate.py:
345 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
346 and livecd-kernel
347
348 16 Apr 2006; Preston Cody <codeman@gentoo.org>
349 src/GLIGenDialog.py:
350 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
351
352 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
353 src/GLIInstallProfile.py:
354 change kernel-modules to not be so stupid
355
356 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
357 GLIMD: fix display problem with execute.pyhtml.
358 make tables better.
359
360 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
361 src/GLIInstallProfile.py:
362 fix handling of int/float for minor
363 src/templates/x86ArchitectureTemplate.py:
364 save/restore partition name
365 src/GLIStorageDevice.py:
366 support for partition name
367
368 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
369 touchups to add_profile in GLIMD to link to webgli
370 add a save to GLIMD profile button in webgli's saveprofile
371 gliserv.py:
372 initial attempt at custom networking info per client. hostname support only.
373
374 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
375 src/net/server/html/webgli/partitioning[234].pyhtml:
376 small fixes for new partioning code
377
378 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
379 src/GLIClientController.py:
380 record PID of secondary thread
381
382 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
383 src/GLIGenDialog.py:
384 small fix for new partitioning code
385
386 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
387 src/GLIStorageDevice.py:
388 add get_devnode()
389 fix up detect_devices() to detect cciss/ida arrays
390 src/templates/x86ArchitectureTemplate.py:
391 use get_devnode() instead of figuring out the devnode
392 skip first 3 steps if partition layout hasn't changed
393 wipe disk and create new disklabel before recreating partitions
394 src/GLIArchitectureTemplate.py:
395 use get_devnode() in local mount and fstab stuff
396
397 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
398 src/GLIStorageDevice.py:
399 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
400
401 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
402 src/templates/x86ArchitectureTemplate.py:
403 continue breakup/cleanup of partitioning code
404
405 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
406 src/GLIStorageDevice.py:
407 set disklabel to default for arch when clearing the partition table
408 src/templates/x86ArchitectureTemplate.py:
409 complete rewrite of first and second passes
410
411 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
412 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
413 allow iterating over Device object to get partitions
414
415 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
416 src/GLIStorageDevice.py:
417 allow access to Device object like a dict
418
419 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
420 src/GLIStorageDevice.py:
421 allow access to Partition object like a dict
422
423 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
424 src/templates/x86ArchitectureTemplate.py:
425 fail if any filesystems are mounted on the device being partitioned
426
427 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
428 src/GLIStorageDevice.py:
429 reorder minor numbers when loading partitions from disk to match the physical
430 partition order
431
432 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
433 src/GLIStorageDevice.py:
434 overhaul for supporting mac disklabels and partitions out of disk order
435 remove free space from inside extended partition when extended is removed
436
437 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
438 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
439 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
440 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
441 Added bash scripts, icons, and desktop entries from the ebuild to make my
442 life easier.
443
444 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
445 src/GLIStorageDevice.py:
446 raise an exception if the existing partitions are out of disk order
447 look for minors out of order instead of disk position
448
449 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
450 src/fe/dialog/gli-dialog and src/GLIGenDialog:
451 added networkless mode to gli-dialog.
452
453 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
454 src/templates/x86AT:
455 add windows detection code for grub. untested.
456
457 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
458 src/templates/x86ArchitectureTemplate.py:
459 bootloader and partitioning external commands log to compile_output.log
460 wait for device node to exist before resizing
461 add -v to ntfsresize command
462 src/GLIStorageDevice.py:
463 return start/end with ip structure
464 pad min ntfs size by 50 MB just to be safe
465 src/GLIArchitectureTemplate.py:
466 only install filesystem tools for partitions with a mountpoint
467
468 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
469 add error catching and text to saving profile dialogs
470
471 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
472 src/GLIPortage.py:
473 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
474 src/templates/x86ArchitectureTemplate.py:
475 fix checks for changed partitions so they will actually get deleted
476
477 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
478 src/GLIClientController.py:
479 slightly better error handling for pre-install failures
480
481 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
482 src/templates/x86ArchitectureTemplate.py:
483 proper return code checking for ext2/3 resizing
484
485 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
486 src/GLIClientController.py:
487 accept 'none' as well as 'null' for network type
488 src/GLIArchitectureTemplate.py:
489 ignore extended partitions in mount_local_partitions()
490 src/templates/x86ArchitectureTemplate.py:
491 use get_ordered_partition_list() instead of keys().sort() for new_part_list
492 check to make sure start sector for primary isn't less than end sector for
493 previous extended
494 src/GLIClientController.py:
495 write dns servers to /etc/resolv.conf
496
497 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
498 src/GLIPortage.py:
499 copy_pkg_to_chroot() uses compile_output.log for command output
500
501 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
502 only keep a 1000 line 'scrollback' buffer for the compile output and log file
503
504 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
505 src/GLIPortage.py:
506 add code make GLIPortage.py capable of being run stand-along for dynamic
507 stage3 generation and copying packages in a GRP-ish way
508 grp code fixups
509
510 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
511 src/GLIPortage.py:
512 ignore blank packages passed to get_deps() and emerge()
513
514 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
515 src/GLIUtility.py:
516 add get_chosts() function
517
518*GLI-0.3 (12 Feb 2006)
519
520 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
521 src/templates/x86ArchitectureTemplate.py:
522 pull old start/end sector values from somewhere that actually has them
523 add logic for extended partition to code that makes sure new end sector
524 doesn't overlap start sector of next partitions
525 don't freak out if partition can't be deleted
526
527 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
528 src/GLIPortage.py:
529 run env-update at the end of copy_pkg_to_chroot()
530
531 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
532 src/templates/x86ArchitectureTemplate.py:
533 I'm a complete fscking dumbass. I recorded the end sector for partitions that
534 weren't being touched, but I never used it when recreating them...the end was
535 calculated from the size in MB instead :/
536
537 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
538 src/GLIArchitectureTemplate.py:
539 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
540 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
541 src/GLIPortage.py:
542 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
543 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
544 'resized' flag
545
546 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
547 src/GLIPortage.py:
548 short circuit and check vdb directly if package begins with '='
549
550 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
551 added more packages to extra_packages list in IP
552
553 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
554 src/templates/x86ArchitectureTemplate.py:
555 10 tries to create filesystem instead of 3
556 src/GLIPortage, src/GLIArchitectureTemplate.py:
557 ignore_missing flag for copy_pkg_to_chroot()
558
559 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
560 src/GLIPortage.py:
561 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
562
563 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
564 src/net/server/gliserv.py:
565 fix handling of 404 for real files
566 src/net/server/GLIServerProfile.py:
567 look for 'hostname' in attributes instead of 'name'
568
569 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
570 src/SimpleXMLParser.py:
571 initial support for 'include' in XML files
572 src/GLIStorageDevice.py:
573 initial support for %
574 src/GLIClientController.py:
575 add debugging statements to pre-install steps
576
577 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
578 webgli/configfiles:
579 check for key in etc_files['rc.conf'] to fix key error
580 webgli/timezone: small fix.
581 webgli/extrapackages: list-type fix
582 webgli/services: same
583 glimd: add/edit_client updates.
584
585 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
586 added configure.pyhtml to glimd. minor changes
587 to top and add_client. fixed up showargs.
588 added execute.pyhtml
589 changed register clients line in gliserv for name->hostname.
590 updated TODO.
591
592 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
593 src/net/server/*:
594 added add/del/edit client/profile.pythml for glimd.
595 updated templates, showclients, and gliserv.
596
597 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
598 src/net/server/*:
599 stupid threading module...
600
601 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
602 AT: rc.conf -> conf.d/clock
603
604 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
605 src/GLIPortage.py:
606 show 'Calculating dependencies for ...' in subprogress bar at beginning of
607 emerge()
608 src/GLIArchitectureTemplate.py:
609 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
610 in the chroot
611 remove _quickpkg_deps() and _portage_best_{visible,version}()
612 src/GLIUtility.py:
613 fail immediately in validate_uri() if provided URI can't be parsed
614 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
615 debug code in spawn()
616 use lower-level os.read() instead of file.read() because python sucks
617 src/templates/x86ArchitectureTemplate.py:
618 basic subprogress reporting for partitioning
619 total_steps was 1 too high
620
621 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
622 src/GLIUtility.py:
623 move parse_vdb_contents() to GLIPortage
624 src/GLIPortage.py:
625 remove all symlink fixups
626 ignore 'dir' entries in CONTENTS
627 call tar with -p
628
629 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
630 AT: bootsplash is now gensplash
631 gliserv: add advanced_mode to shared_info
632 webgli: Added advanced mode. mostly just disables a few screens.
633
634 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
635 src/GLIPortage.py:
636 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
637 added emerge()
638 update sub-progress after each package is emerged
639 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
640 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
641 remove link if it exists before moving content into place
642 src/GLIArchitectureTemplate.py:
643 install_packages() now calls emerge() in GLIPortage
644 change all calls to self._emerge() to self._portage.emerge()
645 comment out all emerge status checking...using exceptions now
646 call copy_pkg_to_chroot() directly for livecd-kernel
647
648 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
649 src/GLIArchitectureTemplate.py:
650 remove add_pkg_to_world() and copy_pkg_to_chroot()
651 copy installer.log to installer.log.failed on install failure
652 src/GLIUtility.py:
653 added get_keymaps()
654 spawn() takes any False argument for chroot instead of just None
655 src/GLIPortage.py:
656 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
657 change copy_pkg_to_chroot() to work properly with use_root=False
658 figure PORTAGE_TMPDIR properly
659
660 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
661 src/net/server/html/*:
662 converted showclients, load/saveprofile
663
664 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
665 src/GLIPortage.py:
666 exclude packages already in chroot vdb from binary deplist
667 chroot to use best_version for chroot's vdb
668 src/runtimedeps.py:
669 accept ROOT via commandline instead of env
670
671 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
672 src/runtimedeps.py:
673 remove passing of ROOT
674 src/GLIPortage.py:
675 modify get_deps() to get deptree for each package and merge into final list
676 remove depgraph class
677 add debugging code to get_deps()
678 src/GLIArchitectureTemplate.py:
679 combine code for GRP/compile in install_packages() into one block
680 debugging code in install_packages()
681
682 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
683 src/runtimedeps.py:
684 initial commit
685 src/GLIPortage.py:
686 use separate script for GRP deps
687 remove calls to portage module
688
689 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
690 src/GLIPortage.py:
691 initial commit
692 move some of portage function from GLIAT
693 flipped around a few function args
694 src/GLIArchitectureTemplate.py:
695 revamp install_packages() for new GLIPortage
696
697 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
698 src/GLIArchitectureTemplate.py:
699 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
700
701 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
702 src/net/server/gliserv.py:
703 wrap generated code in a class to isolate it a bit better
704 302 redirects work
705 don't use cgi.escape() for <% %>
706 src/net/server/html/webgli/*:
707 load/save profile
708 src/GLIUtility.py:
709 change /sbin/lspci to just lspci
710
711 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
712 src/GLIClientController.py:
713 change ordering of statements in CC run() while loop to not go past the end
714 of the array
715 src/GLIArchitectureTemplate.py:
716 removed redundant bind mounts
717
718 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
719 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
720 added a diagram by blackace from last night.
721 added the glossary in RTF format.
722
723 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
724 x86AT: separated out emerge/configure from running of bootloader
725 added MBR drive support to lilo.
726 these changes will likely not work.
727 AT: added setup_and_run_bootloader step.
728
729 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
730 src/net/server/gliserv.py:
731 call generated code in a function
732 src/net/server/html/webgli/*:
733 include top/bottom
734 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
735 src/GLIClientCongifuration.py:
736 install mode magic
737
738 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
739 src/GLIClientController.py:
740 use GLIException when there's an import problem
741 added debug code to show install_steps
742 src/templates/amd64ArchitectureTemplate.py:
743 add . to import path
744 proper path this time: ../../templates
745 src/GLIArchitectureTemplate.py:
746 add _portage_best_version() function
747
748 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
749 added initial glossary and gimli diagram to the docs directory.
750 modify gli-dialog to allow editing of the install_profile after loading XML.
751
752 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
753 src/net/server/html/webgli/:
754 converted globaluse, localuse, networkmounts, portagetree, and stageselection
755 moved saveclientconfig stuff into clientconfig
756 moved saveconfigfiles into config files
757 converted etc_portage and makedotconf
758 converted bootloader and kernel
759 convert daemons, extrapackages, networking, review, services, timezone, users
760 src/net/server/gliserv.py:
761 proper 404 handling for .pyhtml extension
762 HTML escape <% %> stuff
763 work around python's sucky regexes
764 src/GLIInstallProfile.py:
765 allow set_{rsync,ftp,http}_proxy() to accept empty values
766
767 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
768 src/net/server/gliserv.py:
769 initial commit of Legolas templating engine
770 302 redirects
771 src/net/server/html/index.html, src/net/server/webgli_template.html:
772 minor changes for new code
773 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
774 initial commit of the conversion from the monolithic WebGLIHandler.py to the
775 one file per path Legolas goodness
776 partitioning[2-4] done
777
778 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
779 webgli: dhcp options in CC and post-install.
780 updated comparison chart.
781 webgli: etc/portage/* and distcc support added. not too-well tested.
782
783 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
784 webgli_template.html: valign=top on left side.
785 webgli: fix bootloader boot_device. now working.
786 webgli: CC proxy done. post-install proxy in progress.
787
788 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
789 src/net/server/webgli_template.html:
790 increase padding for content cell to 7px and add colspan=2
791
792 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
793 webgli: added graphic bar on top
794 webgli: added hover effects on the links on the left
795 webgli: re-rendered header_bg.png to stretch without artifacts
796
797 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
798 webgli: make.conf disabling fixes for dynamic_stage3
799 fixed portage snapshot browse popup
800 all changes tested.
801 webgli: add debug mode to CC screen. the screen still needs lots of work.
802
803 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
804 added debug mode question to gli-dialog
805 added CC proxies to CC networking for gli-dialog
806 webgli: fixed skip CC networking if connection active
807 webgli: portage snapshot defaults to CD
808 webgli: bootloader mbr drive selection
809 webgli: USE flags unselectable if dynamic_stage3
810 webgli: manual extra packages and save button.
811
812 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
813 src/GLIUtility.py:
814 change ping count to 2
815 docs/comparison.html
816 initial commit
817
818 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
819 src/templates/x86ArchitectureTemplate.py:
820 fix map() issue with grub code
821 replace kernel_names and initrd_names loops with one-liners
822
823 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
824 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
825 initial gli-dialog support for recommended partitioning layout and clear.
826 failure cleanup now an option for gli-dialog.
827 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
828 added comparison list and updated TODO!
829
830 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
831 src/GLIArchitectureTemplate.py:
832 fix to stage1() debug code
833 fix to stage2() debug code
834
835 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
836 some more bootloader code fixes. forgot boot_device != mbr_device.
837
838 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
839 src/GLIStorageDevice.py:
840 fix to unallocated space merging when last one is after part 4
841
842 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
843 src/GLIArchitectureTemplate.py:
844 small fix to debugging code in copy_pkg_to_chroot()
845
846 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
847 more bugfixes with bootloader code
848 gli-dialog side appears to work
849
850 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
851 initial adding of boot_device to backend.
852 initial boot_device support added to gli-dialog.
853 some fixes of my poor coding
854
855 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
856 converted gli-dialog to use the install_package_list.
857 gtkfe has already been converted by AllanonJL
858 new way working in gli-dialog now and added to webgli.
859 added set/get_boot_device() to IP
860
861 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
862 get_install_package_list added to InstallProfile. This can be used by the FEs
863
864 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
865 src/templates/x86ArchitectureTemplate.py:
866 call ls with '-1 --color=no'
867
868 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
869 added warning (#9) to GRP ppl about stage3 tarballs
870
871 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
872 src/GLIArchitectureTemplate.py:
873 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
874 confused
875
876 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
877 removed protocols from rc.conf screens
878 finished initial rc.conf and make.conf in webgli
879
880 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
881 src/net/server/gliserv.py:
882 add -h option to usage()
883 show time and request URI in debug mode
884 show client IP in debug mode
885 just use IP instead of trying to do a reverse lookup
886
887 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
888 src/net/server/gliserv.py:
889 'classier' 401 message
890 proper commandline parsing
891 help via -h
892 user/pass can be specificed via commandline option
893
894 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
895 src/net/server/gliserv.py:
896 basic HTTP auth
897
898 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
899 src/net/server/gliserv.py:
900 dynamic module reloading (yipee!)
901 send 'Last-Modified' header for real files
902 respond to HEAD with just headers
903 src/net/server/handlers/WebGLIHandler.py:
904 icons for drives
905
906 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
907 src/net/server/handlers/WebGLIHandler.py:
908 initial 'pretty' partition table display support
909 clicking partition in 'pretty' display works instead of radio buttons
910 radio buttons and pretty display work together
911 META redirect instead of javascript
912 pretty display stretches across entire screen
913 'Recommended layout' and 'Clear drive' functions
914 properly catch exceptions from do_recommended()
915 src/GLIArchitectureTemplate.py:
916 replace preinst, copy, postinst, rm steps with qmerge
917 whoops...that shouldn't have been commented out
918 create image_dir with -p in copy_pkg_to_chroot()
919 more generic of symlink crappiness
920 new copy_pkg_to_chroot() actually works now
921
922 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
923 src/GLIStorageDevice.py:
924 initial generic disk support
925 fixes for add_partition() code
926 src/net/server/handlers/WebGLIHandler.py:
927 added support for creating generic disks
928 add new partition working
929 save and delete partitions
930
931 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
932 webgli: Partitioning making progress.
933
934 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
935 src/GLIArchitectureTemplate.py:
936 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
937 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
938 dir) and works around /etc/gconf symlink problem
939
940 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
941 webgli: lots of updates. preliminary partitioning. extra packages works.
942
943 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
944 src/net/server/gliserv.py:
945 httpd now supports HTTPS and falls back to HTTP if not available
946 make fallback actually work
947 src/net/server/SecureXMLRPCServer.py:
948 SecureSocketServer is now threaded
949
950 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
951 src/net/client/gliclient.py:
952 try to use HTTPS for XMLRPC first and fallback to HTTP
953 pretend mode
954 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
955 HTTPS XMLRPC goodness from samyron
956 pass name of certificate
957
958 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
959 wegli: daemons and services screens done.
960
961 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
962 webgli: networking and users screens
963 added return_redirect to handler.py
964 loading and saving install/client profiles works for webgli now
965 Review also done
966
967*GLI-0.2 (27 Oct 2005)
968
969 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
970 src/templates/x86ArchitectureTemplate.py:
971 properly check for bootloader emerge exist status with exitsuccess()
972 log output of grub install command
973 add --batch --no-floppy to grub command
974 grubinstallstring only gets logged if debug is on
975 src/GLIUtility.py:
976 update progress bar to 100% when process finishes
977
978 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
979 src/GLIClientController.py:
980 added debugging code for the interaction between the 2 threads via Event()
981 src/GLIUtility.py:
982 doubled the buffer size in spawn()
983 bump buffer size up to 16384
984 only report progress in 5% increments
985 src/GLIArchitectureTemplate.py:
986 kernelpkgs.txt support code
987 above disabled because it sucks
988 added add_pkg_to_world()
989
990 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
991 src/GLIArchitectureTemplate.py:
992 use tar | tar to copy files in copy_pkg_to_chroot()
993 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
994
995 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
996 DEBUGGING ADDED TO AT. verbose field added to CConfig.
997
998 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
999 src/net/server/gliserv.py:
1000 / maps to index.html
1001 look for actual files in html/
1002 src/net/html:
1003 new template
1004 src/GLIUtility.py:
1005 added parse_vdb_contents()
1006 src/GLIArchitectureTemplate.py:
1007 added copy_pkg_to_chroot()
1008 added debug code to dynamic-stage3
1009 switch dynamic-stage3 to new method
1010 lots of bug fixes from adding debug code
1011
1012 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
1013 webgli initial bootloader support + changed make.conf.
1014 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
1015
1016 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1017 src/GLIUtility.py:
1018 horrible tangled mess of code that is tarball unpacking subprogress display
1019 add unpack progress to portage snapshot
1020 use read() instead of readlines() in spawn()
1021 only update progress bar for whole percents
1022
1023 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1024 src/templates/x86ArchitectureTemplate.py:
1025 change call to 'grub' to use GLIUtility.exitsuccess()
1026 add definition of 'build_mode' in _configure_lilo()
1027 src/misc/updategtkfe, src/misc/updateglid:
1028 fix so subshell is called in root shell
1029
1030 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1031 src/net/server/handlers/WebGLIHandler.py:
1032 stage screen launches URI browser in sized window with various properties set
1033
1034 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1035 src/misc/updategtkfe:
1036 updated to actually work
1037 remove previous snapshot and extracted dir before downloading
1038 src/misc/updateglid:
1039 updated to actually work
1040 src/templates/x86ArchitectureTemplate.py:
1041 fixed bug where grub code was looking for 'root+root+file_name2'
1042
1043 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1044 src/net/server/handlers/WebGLIHandler.py:
1045 URI browser
1046 added mirror selection
1047 src/GLIUtility.py:
1048 ls via ssh strips off ending *
1049
1050 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
1051 more updates to webgli. stage selection.
1052
1053 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
1054 updated webgli with preliminary Network Mounts support.
1055
1056 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
1057 GenDialog: string formatting and yes/no label fixes.
1058 added WebGLI template for gliserv.py
1059 added WebGLIHandler as well as a definition for it in gliserv.py
1060 updates to the webgli files even though they won't be there for long.
1061 Utility: remove exception for non-existant grppkgs.txt until the new livecd
1062 goes public.
1063
1064 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1065 src/net/server/gliserv.py:
1066 override dict to not be so anal
1067 main server now loads separate module to handle requests
1068 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
1069 split out profile URLs into separate handler function
1070 move handlers into subdirectory
1071 add Welcome and Clients handlers
1072
1073 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1074 src/GLIUtility.py:
1075 raise exception if password prompt received twice
1076
1077 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1078 src/GLIUtility.py:
1079 removed rot13ify()
1080
1081 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1082 src/net/server/gliserv.py:
1083 allow for param to be passed multiple times in GET
1084 no XMLRPC functions return None
1085 modify POST request parsing to only create a list if needed
1086 fix GET request parsing so the list creation for multiple values works
1087 src/net/client/gliclient.py:
1088 various typo and type mismatch fixes
1089 exit after exception
1090
1091 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1092 src/net/client/gliclient.py:
1093 initial commit
1094 pass MAC to XMLRPC functions
1095 src/net/server/GLIServerProfile.py:
1096 rename GLIClientsProfiles to GLIServerProfile
1097
1098 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1099 src/net/server/gliserv.py:
1100 now handles POST requests
1101 move majority of request handling code to common_handler() to reduce code
1102 duplication
1103 profile loading
1104 client reg via XMLRPC goes into SharedInfo()
1105 /showclients redesign
1106 template fixes
1107 allow handler functions to add/change headers
1108 save profile
1109
1110 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1111 src/net/server/GLIClientsProfiles.py:
1112 initial commit
1113 src/net/server/template.html:
1114 initial commit
1115 src/net/server/gliserv.py:
1116 add template mojo
1117
1118 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1119 src/net/server/gliserv.py:
1120 XMLRPC mojo
1121
1122 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1123 src/GLIArchitectureTemplate.py:
1124 add code in _edit_config() to comment line where variable is defined
1125 previously
1126 insert new line under previous definition of variable if it exists
1127 small _edit_config() cleanup
1128 src/GLIStorageDevice.py:
1129 add clear_partitions() function
1130 new sizes for recommended partition layout
1131 automatically calculate swap size for recommended layout
1132
1133 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1134 src/templates/x86ArchitectureTemplate.py:
1135 fat16 mojo
1136
1137 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1138 src/GLIStorageDevice.py:
1139 prevent do_recommended() from being run twice
1140 rewrite do_recommended() to be more robust
1141 src/GLIArchitectureTemplate.py:
1142 rework _edit_config() to not write duplicate entries
1143
1144 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1145 src/GLIStorageDevice.py:
1146 added do_recommended() function to automatically created 256M/1G/* layout
1147
1148 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
1149 src/gli-dialog.py: added set_distcc to the list
1150 GenDialog: added set_distcc. untested.
1151 IP: added install_distcc flag.
1152 AT: added install_distcc function based on the flag. runs after build_kernel
1153 changed AT spawn command for distcc for nodeps.
1154
1155 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1156 src/GLIUtility.py:
1157 add rot13ify() function
1158
1159 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
1160 src/GenDialog.py:
1161 added a sentence of text. unchecking support added.
1162
1163 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
1164 src/GLIUtility.py:
1165 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
1166 src/GenDialog.py:
1167 still working on extra_packages. transformed the list to new format.
1168 added GRP indication to list. untested.
1169 TODO lists updated.
1170 src/fe/dialog/gli-dialog.py:
1171 spelling mistook.
1172
1173 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1174 src/GLIUtility.py:
1175 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
1176
1177 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1178 src/GLIUtility.py:
1179 add get_directory_listing_from_uri()
1180 add http support to above
1181 add ftp support to above
1182 add scp support to above
1183 src/GLIArchitectureTemplate.py:
1184 "0" instead of 0 for key of single-element dict passed to _edit_config()
1185
1186 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
1187 value_only -> only_value
1188
1189 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
1190 gutted out all of etc_portage structure since it is now all handled by
1191 etc_files
1192
1193 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1194 src/GLIArchitectureTemplate.py:
1195 install_packages() sends progress update notifications
1196 src/templates/x86ArchitectureTemplate.py:
1197 increase sleep to 5s between format tries
1198 src/GLIClientController.py:
1199 pass 'self' to AT instead of 'self._pretend'
1200
1201 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
1202 logger -> logger.log in x86AT
1203
1204 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
1205 added set_etc_portage to IP. debugging gli-d's support for it.
1206
1207 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1208 src/templates/x86ArchitectureTemplate.py:
1209 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
1210
1211 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1212 src/GLIArchitectureTemplate.py:
1213 add _portage_best_version() function and rework install_packages() to allow
1214 for future X of Y tracking
1215 Use best_visible instead of best_version
1216 tracked down and fixed missing = causing empty install extra packages
1217 use = when emerging also
1218 quickpkg hokey pokey
1219 run _get_packages_to_emerge() again with -pk
1220
1221 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
1222 src/ArchTemplate:
1223 removed install_xorg_x11, and put the xorg.conf copying at
1224 the end of install_packages.
1225 added updateglid to /src/misc
1226 updated all core files with new GPL notice and copyright statement.
1227
1228 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1229 src/GLIUtility.py:
1230 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
1231 a snapshot in /mnt/cdrom/snapshots/
1232 get_snapshot_from_cd() adds file:// at the beginning
1233 change calls to extra package special case functions to 'self.blah'
1234
1235 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
1236 src/ArchTemplate: changed "voodoo".
1237 changed order of portage sync methods. made a fallback to webrsync if
1238 normal emerge sync fails.
1239 removed get_sources_from_cd because it is obsolete.
1240 add special cases to install_packages. remove fatal exception on package
1241 install failure b/c the box will still be bootable.
1242 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1243 handled in the FEs.
1244 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1245 awaiting testing.
1246
1247 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1248 src/GLIStorageDevice.py:
1249 global try/except block around fs resizable detection code
1250 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1251 install-failed cleanup function
1252
1253 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1254 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1255
1256 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1257 GLIGenDialog:
1258 add drive choices for loaded configs.
1259 force snapshot for dynamic_stage3
1260 init the snapshoturi input to the cd snapshot if not already selected.
1261 if dynamic_stage3, skip the make.conf step.
1262 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1263 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1264
1265 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1266 src/GLIArchitectureTemplate.py:
1267 manually call MAKEDEV in stage3-dynamic code
1268 copy /etc/inittab.old to /etc/inittab in chroot
1269 src/GLIUtility.py:
1270 add beginning of validate_uri() function
1271 add file:/// support to validate_uri()
1272 single quotes when setting livecd password
1273
1274 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1275 src/GLIGenDialog.py:
1276 change getmountpoint() to get_mountpoint()
1277 src/misc/updategtkfe:
1278 committed script to automatically download latest snapshot and run gtkfe
1279 src/templates/x86ArchitectureTemplate.py:
1280 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1281 src/GLIArchitectureTemplate.py:
1282 give tmp_minor an initial value in mount_local_partitions so that the value
1283 remain from the previous drive
1284
1285 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1286 src/templates/x86ArchitectureTemplate.py:
1287 Fix _configure_lilo() for IP using GLISD stuff
1288 src/GLIArchitectureTemplate.py:
1289 install_cron_daemon() treats "none" specially
1290
1291 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1292 old patch from Steven Mertens to resolve bug #96642
1293 numerous asthetic changes to GenDialog, no real functionality changes though.
1294 strings renamed for global use if necessary.
1295 fix all three parts of bug 102291
1296 disable set_etc_portage until fully-written.
1297
1298 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1299 src/GLIClientController.py:
1300 lower-case http/ftp proxy envvars
1301
1302 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1303 src/GLIClientController.py:
1304 log end of pre_install steps to aid in debugging
1305 src/templates/x86ArchitectureTemplate.py:
1306 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1307
1308 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1309 src/GLIArchitectureTemplate.py:
1310 check to make sure that the device node we're wait for to exist isn't of
1311 type 'free'
1312
1313 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1314 src/GLIGenDialog.py:
1315 convert install_packages to list in set_extra_packages()
1316 check return code of checklist() call in "Manual" section
1317 *actually* fix the first problem
1318
1319 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1320 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1321 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1322
1323 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1324 src/GLIArchitectureTemplate.py:
1325 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1326
1327 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1328 Add CDATA support to SimpleXMLParser and add utility functions for it.
1329
1330 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1331 src/GLIArchitectureTemplate.py:
1332 Fix case where vixie-cron is specified as a full package atom, as we still
1333 don't want to run 'crontab /etc/crontab' for it.
1334
5*GLI-0.1_alpha (4 Apr 2005) 1335*GLI-0.1 (3 Aug 2005)
6 1336
1337 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1338 add scp to list of is_uri() so GenDialog doesn't complain.
1339 fixed livecd-kernel bug in bootloader code.
1340 fixed gendialog for dynamic_stage3 instead of "networkless"
1341 change bootloader to allow for both initrd and initramfs.
1342 fix IP for dynamic_stage3.
1343 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1344
1345 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1346 Added full scp:// URI support to get_uri() in GLIUtility
1347 Remove "networkless" from dynamic stage3 if locic.
1348 Remove print statement from scp:// code.
1349 Change scp code to check for "assword: " instead of "Password:"
1350 Fix post-install network code to create net.eth1+ symlink correctly
1351 Check to make sure pkg can be split on / and some debugging code
1352 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1353 SimpleXMLParser handles True/False/None correctly now
1354 Comment out above fix
1355 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1356
1357 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1358 Removed a FIXME in the GLIClientConfiguration that is no
1359 longer needed.
1360
1361 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1362 Default to x86 in ClientConfig
1363 Typo in build-a-stage3 code.
1364 Remove MAKEDEV call in build-a-stage3 postscript.
1365
1366 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1367 Rewrote init of IP for gli-d. Other GenDialog updates.
1368 allow network_type to be None in CConfig.
1369
1370 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1371 Add _dynamic_stage3 option to IP.
1372 Add check for that option to dynamic stage3 code in ArchTemplate.
1373 Fix code to determine default route in get_eth_info() in GLIUtility.
1374 Fix serialization of dns-servers in ClientConfig.
1375
1376 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1377 changed default values of cron/logger in IP.
1378 moved GenDialog IP init out to the individual files. gli-dialog's version
1379 will change quite a bit.
1380
1381 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1382 added ppcArchTemplate. blank now. working on yaboot.
1383 modified ArchTemplate for amd64 and ppc custom kernels.
1384 skeleton implementation of _configure_yaboot.
1385 small fixes to other templates.
1386
1387 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1388 GenDialog updates. changed comment in IP.
1389
1390 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1391 src/GLIInstallProfile.py:
1392 Fix codeman's screwup of changing the service seperator to ',' in the parser
1393 without changing it in the serialization code! Also document this in a
1394 comment so you find it easier. Everybody needs to make sure they update
1395 their install profiles!
1396
1397 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1398 src/GLIArchitectureTemplate.py:
1399 Fix casting of list to string and concat of None with string, as well as
1400 commented prototype of checking that mounting actually worked (found a case
1401 where mount can return success, but the mount won't be done).
1402
1403 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1404 src/templates/x86ArchitectureTemplate.py:
1405 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1406 checking for the device, and sleeping 1 second each time.
1407
1408 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1409 src/templates/x86ArchitectureTemplate.py:
1410 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1411 bootloader works again. Also rename _install_{grub,lilo} to
1412 _configure_{grub,lilo} since they don't install the loaders anymore
1413 themselves.
1414
1415 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1416 fix global USE flags to not include the arch types at the end.
1417 updates to GenDialog and gli-d.
1418
1419 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1420 fixing bootloader code for no initrd and initrd->initramfs naming change.
1421
1422 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1423 Proper comments and parameters to GLIException in install_mta()
1424 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1425 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1426 list_tarball_from_mirror() to eliminate blank last item.
1427
1428 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1429 Added stage3 generation code.
1430
1431 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1432 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1433 Mild changes to GenDialog.
1434
1435 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1436 Remove separate install step configure_rc_conf() since it's handled by
1437 update_config_files()
1438 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1439 function is called twice on the same file.
1440
1441 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1442 Missing \ in sed in _get_packages_to_emerge()
1443 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1444 Check in _quickpkg_deps() to ignore blank package names returned from
1445 _get_packages_to_emerge()
1446
1447 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1448 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1449 in the dialog.py gauge code.
1450
1451 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1452 Add code to update_config_files() to go through etc_files and update stuff.
1453 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1454 Only use float() in partition xml parsing code if type == "free"
1455
1456 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1457 finished almost all internationalization of GenDialog.
1458 attempt at fixing rc.conf function. moved 3 generate functions out of
1459 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1460 added dialog.py to the fe/dialog directory so it actually gets used.
1461
1462 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1463 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1464
1465 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1466 fix extra entry in list_mirrors()
1467 beginning internationalization runthrough.
1468
1469 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1470 added dialog.py to /src temporarily until it gets accepted upstream.
1471 fix for unused value in form in dialog.py and changed heights.
1472 fix GenDialog forms.
1473
1474 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1475 Changed hostname/domainname for new baselayout.
1476 Changed _add_to_runlevel errors to logs.
1477 Updated TODO list to show status of GenDialog
1478 More updates to GenDialog including two checklists that probably won't work.
1479 update IP to use comma-separated list instead of space separated for services.
1480
1481 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1482 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1483 GenDialog as it gets closer to completion.
1484
1485 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1486 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1487 instead of int() in add_partition_device_partition() for minor (closes 96804)
1488
1489 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1490 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1491 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1492 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1493
7 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1494 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
8 Apply spawn() patch from #96644 (with minor changes). Make sure the return 1495 Apply spawn() patch from #96644 (with minor changes). Make sure the return
9 value from all spawn() calls is checked with GLIUtility.exitsuccess() 1496 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1497 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1498 Fix undefined variable 'output' issue in spawn().
10 1499
11 20 Jun 2005; Preston Cody <codeman@gentoo.org> 1500 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
12 More updates to GenDialog and gli-d. 1501 More updates to GenDialog and gli-d.
13 1502
14 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1503 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
15 Modify list_mirrors() to return a list of mirror URL/name pairs. 1504 Modify list_mirrors() to return a list of mirror URL/name pairs.
16 1505
17 19 Jun 2005; Preston Cody <codeman@gentoo.org> 1506 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
18 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to 1507 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
19 get subarch. 1508 get subarch.
20 1509
21 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1510 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
22 Backend partitioning will create disklabel is none exists. Installprofile 1511 Backend partitioning will create disklabel is none exists. Installprofile
23 defaults to "" now instead of "msdos" for disklabel type. Fix for 1512 defaults to "" now instead of "msdos" for disklabel type. Fix for
24 mount_local_partitions() to remember device along with minor in the 1513 mount_local_partitions() to remember device along with minor in the
25 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and 1514 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
26 add else block to log unsupported netmount types to mount_network_shares() 1515 add else block to log unsupported netmount types to mount_network_shares()
27 1516
28 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1517 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
29 src/GLIArchitectureTemplate.py: 1518 src/GLIArchitectureTemplate.py:
30 Refactor kernel_compile common stuff, fix 2.4 build process. 1519 Refactor kernel_compile common stuff, fix 2.4 build process.
31 src/fe/cli/clife.py: 1520 src/fe/cli/clife.py:
32 Logging system. 1521 Logging system.
33 src/GLIUtility.py, src/GLIStorageDevice.py: 1522 src/GLIUtility.py, src/GLIStorageDevice.py:
34 Add comments about re-writes needed for boxes without sysfs. 1523 Add comments about re-writes needed for boxes without sysfs.
35 1524
36 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1525 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
37 src/GLIArchitectureTemplate.py: 1526 src/GLIArchitectureTemplate.py:
38 2.4 support (pull version data from /usr/src/linux/Makefile), incl. 1527 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
39 'make dep' call for custom compile. build_mode support for prepare-only and 1528 'make dep' call for custom compile. build_mode support for prepare-only and
40 none types completed. custom compile function chains shell functions in 1529 none types completed. custom compile function chains shell functions in
41 spawned script, to allow for catching all errors. 1530 spawned script, to allow for catching all errors.
42 1531
43 15 Jun 2005; Preston Cody <codeman@gentoo.org> 1532 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
44 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe 1533 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
45 and GenDialog. other gendialog updates as well. kernel updates untested. 1534 and GenDialog. other gendialog updates as well. kernel updates untested.
46 1535
47 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1536 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
48 src/GLIInstallProfile.py: 1537 src/GLIInstallProfile.py:
49 Change structure of etc-portage stuff. The serialization was broken before my 1538 Change structure of etc-portage stuff. The serialization was broken before my
50 last commit, and I am the only person that's ever used it. The new schema is 1539 last commit, and I am the only person that's ever used it. The new schema is
51 as follows: 1540 as follows:
52 <etc-portage> 1541 <etc-portage>
63 </entry> 1552 </entry>
64 </file> 1553 </file>
65 </etc-portage> 1554 </etc-portage>
66 1555
67 1556
68 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1557 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
69 src/GLIInstallProfile.py: 1558 src/GLIInstallProfile.py:
70 Add new entry for gli-profile/kernel-build-method item. Add missing 1559 Add new entry for gli-profile/kernel-build-method item. Add missing
71 serialize_etc_portage (temporary). Make serialize_make_conf always print the 1560 serialize_etc_portage (temporary). Make serialize_make_conf always print the
72 keys in the same order. 1561 keys in the same order.
73 1562
74 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1563 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
75 src/GLIArchitectureTemplate.py: 1564 src/GLIArchitectureTemplate.py:
76 Clean up commenting used by _edit_config(), and fix bug where wrong comment 1565 Clean up commenting used by _edit_config(), and fix bug where wrong comment
77 was repeatedly appended to make.conf. 1566 was repeatedly appended to make.conf.
78 1567
79 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1568 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
81 Put some Linux-2.6 specific code under a if statement. Store list of 1570 Put some Linux-2.6 specific code under a if statement. Store list of
82 successfully mounted swap device for using swapoff. Add proper error checking 1571 successfully mounted swap device for using swapoff. Add proper error checking
83 to install_packages and install_filesystem_tools. Fixed namespace conflicts on 1572 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
84 'file'. Clean up some redundant code (thanks to pychecker).' 1573 'file'. Clean up some redundant code (thanks to pychecker).'
85 1574
86 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1575 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
87 Fix typos: get_extended() instead of get_extended_partition(). Added 1576 Fix typos: get_extended() instead of get_extended_partition(). Added
88 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility. 1577 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
89 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync' 1578 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
90 1579
91 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> 1580 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
92 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed 1581 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
93 in add_network_interface. 1582 in add_network_interface.
94 1583
95 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py: 1584 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1585 src/GLIArchitectureTemplate.py:
96 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any 1586 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
97 usage - this caused a failure for stage1/stage2 previously. swapoff for swap 1587 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
98 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during 1588 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
99 prepare_chroot. 1589 prepare_chroot.
100 1590
102 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog, 1592 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
103 +src/fe/installer-gtk: 1593 +src/fe/installer-gtk:
104 Add new automated CLI frontend. Add scripts that are the intended means to 1594 Add new automated CLI frontend. Add scripts that are the intended means to
105 use each frontend. 1595 use each frontend.
106 1596
107 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1597 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
108 src/GLIClientController.py: 1598 src/GLIClientController.py:
109 Add null type to network config, for cases where the interface is already up 1599 Add null type to network config, for cases where the interface is already up
110 and should not be touched (netboot for example). 1600 and should not be touched (netboot for example).
111 1601
112 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1602 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
113 src/GLIArchitectureTemplate.py: 1603 src/GLIArchitectureTemplate.py:
114 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a 1604 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
115 string!. Try to use binary packages if available by default. 1605 string!. Try to use binary packages if available by default.
116 1606
117 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1607 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
118 src/GLIArchitectureTemplate.py: 1608 src/GLIArchitectureTemplate.py:
119 More error checking for _add_to_runlevel, to ensure that the init script 1609 More error checking for _add_to_runlevel, to ensure that the init script
120 actually exists before we try to add it. set_services phase must take place 1610 actually exists before we try to add it. set_services phase must take place
121 after the package installation, otherwise the init scripts might not exist. 1611 after the package installation, otherwise the init scripts might not exist.
122 Find the correct init script for the cron and logging daemons, and add that 1612 Find the correct init script for the cron and logging daemons, and add that
123 instead of the package atom. 1613 instead of the package atom.
124 1614
125 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1615 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
126 src/GLIArchitectureTemplate.py: 1616 src/GLIArchitectureTemplate.py:
127 Fix up _edit_config so that it works if the file doesn't already exist. Fix 1617 Fix up _edit_config so that it works if the file doesn't already exist. Fix
128 usage of 'file' to 'contents' for the variable name, as it shadows 1618 usage of 'file' to 'contents' for the variable name, as it shadows
129 __builtin__.file. 1619 __builtin__.file.
130 1620
131 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1621 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
132 src/GLIArchitectureTemplate.py: 1622 src/GLIArchitectureTemplate.py:
133 Add MTA install code, and include MTA install phase. Ensure 1623 Add MTA install code, and include MTA install phase. Ensure
134 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support 1624 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
135 for 'none' kernel config for build_kernel phase. Put kernel_script in 1625 for 'none' kernel config for build_kernel phase. Put kernel_script in
136 /var/tmp instead of /root for build_kernel phase. 1626 /var/tmp instead of /root for build_kernel phase.
137 1627
138 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py: 1628 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
139 Rename mta variables to match syslog/cron variables. 1629 Rename mta variables to match syslog/cron variables.
140 1630
141 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1631 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
142 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py, 1632 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
143 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore, 1633 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
144 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore, 1634 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
145 src/templates/.cvsignore, src/tests/.cvsignore: 1635 src/templates/.cvsignore, src/tests/.cvsignore:
146 Refactor partition formatting again to include error checking. Allow 'none' 1636 Refactor partition formatting again to include error checking. Allow 'none'
147 for kernel and bootloader specifications. Add .cvsignore files for .py[co]. 1637 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
148 1638
149 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1639 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
150 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py: 1640 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
151 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to 1641 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
152 only have a single spawn call. 1642 only have a single spawn call.
153 1643
154 11 Jun 2005; Preston Cody <codeman@gentoo.org> 1644 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
155 refixed samyron's fix of set_architecture_template. 1645 refixed samyron's fix of set_architecture_template.
156 1646
157 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1647 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
158 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always 1648 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
159 be executable. 1649 be executable.
160 1650
161 10 Jun 2005; Scott Myron <samyron@gentoo.org> 1651 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
162 Fixed one of the FIXME's in the ClientConfiguration. There is now some 1652 Fixed one of the FIXME's in the ClientConfiguration. There is now some
163 error checking when you call set_architecture_template. 1653 error checking when you call set_architecture_template.
164 1654
165 10 Jun 2005; Preston Cody <codeman@gentoo.org> 1655 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
166 moved the mkfsopts input to the partition options menu instead of the during 1656 moved the mkfsopts input to the partition options menu instead of the during
167 the creation process. updated GenDialog to say it supports reiserfs v3. 1657 the creation process. updated GenDialog to say it supports reiserfs v3.
168 1658
169 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py, 1659 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
170 src/GLIStorageDevice.py, fe/dialog/dialogfe.py: 1660 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
171 Complete support for 'mkfsopts' parameter in main system and dialogfe. 1661 Complete support for 'mkfsopts' parameter in main system and dialogfe.
172 Add support for other partition types to dialogfe. 1662 Add support for other partition types to dialogfe.
173 Fix all usages of int(possible_big_number) to long(possible_bit_number) to 1663 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
174 avoid integer overflows and wraparounds. 1664 avoid integer overflows and wraparounds.
175 1665
176 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1666 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
177 Removed start/end from XML output and added mkfsopts to partitioning info. 1667 Removed start/end from XML output and added mkfsopts to partitioning info.
178 'mkfsopts' parameter is now used and support for creating xfs, jfs, and 1668 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
179 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser' 1669 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
180 in GLIClientConfiguration. Change from .1 and .9 to constants for 1670 in GLIClientConfiguration. Change from .1 and .9 to constants for
181 partitioning. Fix free space overwriting bug. Remove a few unused functions 1671 partitioning. Fix free space overwriting bug. Remove a few unused functions
182 from rewrite. Fix call to get_partition_at() 1672 from rewrite. Fix call to get_partition_at()
183 1673
184 8 Jun 2005; Preston Cody <codeman@gentoo.org> 1674 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
185 Updates to GenDialog and dialogfe. 1675 Updates to GenDialog and dialogfe.
186 1676
187 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1677 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
188 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker 1678 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
189 1679
190 6 Jun 2005; Preston Cody <codeman@gentoo.org> 1680 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
191 more GenDialog updates to partitioning. 1681 more GenDialog updates to partitioning.
192 1682
193 5 Jun 2005; Preston Cody <codeman@gentoo.org> 1683 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
194 Indenting issue in GLISD/get_ordered_partition_list. 1684 Indenting issue in GLISD/get_ordered_partition_list.
195 updates to GenDialog partitioning and added default UTC for timezone in IP. 1685 updates to GenDialog partitioning and added default UTC for timezone in IP.
196 1686
197 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1687 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
198 Added GLISD.get_model() 1688 Added GLISD.get_model()
199 1689
200 3 Jun 2005; Preston Cody <codeman@gentoo.org> 1690 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
201 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version. 1691 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
202 More updates to GenDialog :) 1692 More updates to GenDialog :)
203 1693
204 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1694 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
205 Added get_interface_realname() function. 1695 Added get_interface_realname() function.
206 1696
207 2 Jun 2005; Preston Cody <codeman@gentoo.org> 1697 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
208 Added auto-save of CConfig and copying to new /root after install. 1698 Added auto-save of CConfig and copying to new /root after install.
209 yet even more GenDialog updates. 1699 yet even more GenDialog updates.
210 1700
211 1 Jun 2005; Preston Cody <codeman@gentoo.org> 1701 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
212 removed print statement from GLISD. more updates to GenDialog. 1702 removed print statement from GLISD. more updates to GenDialog.
213 1703
214 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1704 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
215 Not being able to fetch the stage tarball is now an exception. Chroot wrapper 1705 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
216 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be 1706 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
217 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few 1707 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
218 places in GLIClientConfiguration. 1708 places in GLIClientConfiguration.
219 1709
220 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1710 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
221 Fix mount_local_partitions(), configure_fstab(), and 1711 Fix mount_local_partitions(), configure_fstab(), and
222 install_filesystem_tools() to use GLISD directly. A few more fixes for same. 1712 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
223 A few more fixes for templates/x86Archtemplate 1713 A few more fixes for templates/x86Archtemplate
224 1714
225 27 May 2005; Preston Cody <codeman@gentoo.org> 1715 27 May 2005; Preston Cody <codeman@gentoo.org> :
226 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still 1716 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
227 a work in progress. 1717 a work in progress.
228 1718
229 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1719 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
230 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD 1720 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
231 directly. GLISD can now handle data imported from XML. 1721 directly. GLISD can now handle data imported from XML.
232 1722
233 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1723 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
234 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to 1724 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
235 handle blank (no disklabel) disks. 1725 handle blank (no disklabel) disks.
236 1726
237 20 May 2005; Preston Cody <codeman@gentoo.org> 1727 20 May 2005; Preston Cody <codeman@gentoo.org> :
238 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned 1728 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
239 up, documented, and separated out serialization and grouped all sections. 1729 up, documented, and separated out serialization and grouped all sections.
240 1730
241 19 May 2005; Preston Cody <codeman@gentoo.org> 1731 19 May 2005; Preston Cody <codeman@gentoo.org> :
242 Reorganization of ClientConfiguration and gutting of unused functions. 1732 Reorganization of ClientConfiguration and gutting of unused functions.
243 Removed verbose option from CC. Moved import statement in IP and CConfig up. 1733 Removed verbose option from CC. Moved import statement in IP and CConfig up.
244 1734
245 18 May 2005; Preston Cody <codeman@gentoo.org> 1735 18 May 2005; Preston Cody <codeman@gentoo.org> :
246 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup 1736 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
247 1737
248 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1738 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
249 Fixed bug in finishing_cleanup(). Fix a late-night coding error in 1739 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
250 partitioning. CC serializes install profile to disk and prepare_chroot() 1740 partitioning. CC serializes install profile to disk and prepare_chroot()
251 copies it into /mnt/gentoo/root 1741 copies it into /mnt/gentoo/root
252 1742
253 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1743 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
254 Moved URI parsing into new function parse_uri() 1744 Moved URI parsing into new function parse_uri()
255 1745
256 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1746 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
257 Added XMLParser module. 1747 Added XMLParser module.
258 1748
259 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1749 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
260 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI. 1750 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
261 Minor fix to is_uri() regex to allow hyphens in hostname. 1751 Minor fix to is_uri() regex to allow hyphens in hostname.
262 1752
263 12 May 2005; Preston Cody <codeman@gentoo.org> 1753 12 May 2005; Preston Cody <codeman@gentoo.org> :
264 Updated finishing_cleanup for new unmounting method from agaffney. 1754 Updated finishing_cleanup for new unmounting method from agaffney.
265 1755
266 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1756 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
267 Fix GLILogger to use correct time format string. Fix _edit_config() to 1757 Fix GLILogger to use correct time format string. Fix _edit_config() to
268 properly comment out variables. Fix minor bug in finishing_cleanup(). Add 1758 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
269 unicode support to is_realstring(). 1759 unicode support to is_realstring().
270 1760
271 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1761 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
272 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero 1762 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
273 return value instead of non-zero. Add code to output a traceback to the 1763 return value instead of non-zero. Add code to output a traceback to the
274 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes 1764 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
275 instead of --nocolor. 1765 instead of --nocolor.
276 1766
277 10 May 2005; Preston Cody <codeman@gentoo.org> 1767 10 May 2005; Preston Cody <codeman@gentoo.org> :
278 Added GLIGenDialog.py to make a generic class for the dialog functions that 1768 Added GLIGenDialog.py to make a generic class for the dialog functions that
279 can be used by both dialogfe and the netfe/be. updated both for new filename. 1769 can be used by both dialogfe and the netfe/be. updated both for new filename.
280 date changes. 2004->2005. 1770 date changes. 2004->2005.
281 1771
282 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1772 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
283 Removed 'quiet=True' from spawn() calls 1773 Removed 'quiet=True' from spawn() calls
284 1774
285 10 May 2005; Preston Cody <codeman@gentoo.org> 1775 10 May 2005; Preston Cody <codeman@gentoo.org> :
286 Updated GLIUtility with patches from chotchki. Also added documentation 1776 Updated GLIUtility with patches from chotchki. Also added documentation
287 1777
288 9 May 2005; Preston Cody <codeman@gentoo.org> 1778 9 May 2005; Preston Cody <codeman@gentoo.org> :
289 Added the function for set_etc_portage to ArchTemplate. no step for it yet. 1779 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
290 Updated _edit_config in ArchTemplate, make_config, and various other fixes 1780 Updated _edit_config in ArchTemplate, make_config, and various other fixes
291 from bug #89683, mostly touchups. 1781 from bug #89683, mostly touchups.
292 1782
293 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1783 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
294 GLIStorageDevice cleanup patch from bug #91761 1784 GLIStorageDevice cleanup patch from bug #91761
295 1785
296 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1786 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
297 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix 1787 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
298 _edit_config(). Error logging casts 'error' to str 1788 _edit_config(). Error logging casts 'error' to str
299 1789
300 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1790 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
301 Exceptions received in CC are logged before being passed to the FE. Added 1791 Exceptions received in CC are logged before being passed to the FE. Added
302 code to CC to handle exceptions *not* thrown by the installer itself. 1792 code to CC to handle exceptions *not* thrown by the installer itself.
303 1793
304 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1794 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
305 get_max_mb_for_resize() returns -1 if not self.resizeable 1795 get_max_mb_for_resize() returns -1 if not self.resizeable
306 1796
307 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1797 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
308 More dirty rsync hacks :-/ 1798 More dirty rsync hacks :-/
309 1799
310 29 Apr 2005; Preston Cody <codeman@gentoo.org> 1800 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
311 Patches from chotchki (bug #90325) to improve CC networking. untested. 1801 Patches from chotchki (bug #90325) to improve CC networking. untested.
312 1802
313 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1803 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
314 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in 1804 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
315 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split 1805 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
316 'custom' sync option into 'none' and 'snapshot'. Minor fixes to 1806 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
317 GLIStorageDevice as suggested by pychecker. Fix minor bug in 1807 GLIStorageDevice as suggested by pychecker. Fix minor bug in
318 _get_packages_to_emerge(). Fix _quickpkg_deps() to call 1808 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
319 _get_packages_to_emerge() 1809 _get_packages_to_emerge()
320 1810
321 28 Apr 2005; Preston Cody <codeman@gentoo.org> 1811 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
322 Added group-adding code to set_users in ArchTemplate 1812 Added group-adding code to set_users in ArchTemplate
323 1813
324 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1814 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
325 Added post-install script code 1815 Added post-install script code
326 1816
327 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1817 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
328 Fixed encapsulation issues in GLIClientController (bug #90141) 1818 Fixed encapsulation issues in GLIClientController (bug #90141)
329 1819
330 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1820 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
331 Update resizing code in GLIStorageDevice 1821 Update resizing code in GLIStorageDevice
332 1822
333 17 Apr 2005; Preston Cody <codeman@gentoo.org> 1823 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
334 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger. 1824 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
335 1825
336 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1826 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
337 Reverted change to ArchTemplate and added support for commented line in old 1827 Reverted change to ArchTemplate and added support for commented line in old
338 code. 1828 code.
339 1829
340 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1830 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
341 Changed _edit_config() to modify value in-place instead of commenting out and 1831 Changed _edit_config() to modify value in-place instead of commenting out and
342 adding the new value to the end of the file. 1832 adding the new value to the end of the file.
343 1833
344 15 Apr 2005; Preston Cody <codeman@gentoo.org> 1834 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
345 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration. 1835 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
346 Also updated TODO list. 1836 Also updated TODO list.
347 1837
348 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1838 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
349 Use blackace's one-liner to add comments for all function for use with 1839 Use blackace's one-liner to add comments for all function for use with
350 pythondoc. 1840 pythondoc.
351 1841
352 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1842 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
353 Moved 'end >= device_sectors' check out of loop to check for next partition's 1843 Moved 'end >= device_sectors' check out of loop to check for next partition's
354 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86. 1844 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
355 Partitioning code now tracks start/end of extended for placing logicals. End 1845 Partitioning code now tracks start/end of extended for placing logicals. End
356 point of logical is now adjusted along with start. 1846 point of logical is now adjusted along with start.
357 1847
358 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1848 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
359 Finish overhaul of backend partitioning code. Fixed all bugs that stood in 1849 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
360 the way of partitioning from a blank disk. Add int() around access to minor 1850 the way of partitioning from a blank disk. Add int() around access to minor
361 key in partition information due to new partition code leaving them as float. 1851 key in partition information due to new partition code leaving them as float.
362 1852
363 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1853 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
364 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code 1854 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
365 1855
366 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1856 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
367 Major GLIStorageDevice overhaul...all MB now instead of sectors. 1857 Major GLIStorageDevice overhaul...all MB now instead of sectors.
368 1858
369 8 Apr 2005; Scott Myron <samyron@gentoo.org> 1859 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
370 Added support for DHCP options and MAC addresses in the InstallProfile. 1860 Added support for DHCP options and MAC addresses in the InstallProfile.
371 1861
372 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1862 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
373 Changed mountopts check to work for blank and whitespace. Pipe emerge through 1863 Changed mountopts check to work for blank and whitespace. Pipe emerge through
374 sed to properly strip out junk. 1864 sed to properly strip out junk.
375 1865
376 2 Apr 2005; Preston Cody <codeman@gentoo.org> 1866 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
377 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel 1867 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
378 added --emptytree to stage2. fixed ethx not being added to runlevel defalt. 1868 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
379 1869
380 31 Mar 2005; Preston Cody <codeman@gentoo.org> 1870 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
381 Fixed indent problem in GLICController 1871 Fixed indent problem in GLICController
382 1872
383 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1873 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
384 Check for disklabel type "loop" and use the device name without a minor. 1874 Check for disklabel type "loop" and use the device name without a minor.
385 1875
386 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1876 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
387 Remove /tmp/compile_output.log and /var/log/install.log when install is 1877 Remove /tmp/compile_output.log and /var/log/install.log when install is
388 complete. Added code to (hopefully) keep 2nd thread running after install. 1878 complete. Added code to (hopefully) keep 2nd thread running after install.
389 Patch from zahna for extra arguments to the kernel. Patch from zahna to add 1879 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
390 get_eth_info() function. Remove most of content in amd64ArchTemplate and 1880 get_eth_info() function. Remove most of content in amd64ArchTemplate and
391 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args 1881 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
392 1882
393 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1883 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
394 Added 'append_log=True' to all spawn() calls using logfile=. Append to log 1884 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
395 when unpacking tarball. 1885 when unpacking tarball.
396 1886
397 28 Mar 2005; Preston Cody <codeman@gentoo.org> 1887 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
398 rewrote filesystem_tools. looks like it works so ripping out all the old 1888 rewrote filesystem_tools. looks like it works so ripping out all the old
399 filesystem_tools code. 1889 filesystem_tools code.
400 1890
401 26 Mar 2005; Preston Cody <codeman@gentoo.org> 1891 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
402 Changed the print statements to logging in the partitioning BE code. 1892 Changed the print statements to logging in the partitioning BE code.
403 the logger may need to be imported to the x86archtemplate. unknown yet. 1893 the logger may need to be imported to the x86archtemplate. unknown yet.
404 Added the finishing_cleanup function. 1894 Added the finishing_cleanup function.
405 added a fix to the logger from BenUrban 1895 added a fix to the logger from BenUrban
406 1896
407 25 Mar 2005; Preston Cody <codeman@gentoo.org> 1897 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
408 changed InstallProfile to remove is_uri check on kernel, stage, and portage 1898 changed InstallProfile to remove is_uri check on kernel, stage, and portage
409 URIs. The blank uri check has been commented out. 1899 URIs. The blank uri check has been commented out.
410 ripped out error checking of set_services. this is done by _add_to_runlevel. 1900 ripped out error checking of set_services. this is done by _add_to_runlevel.
411 1901
412 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1902 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
413 set_stage_tarball_uri() doesn't raise an exception on a blank string. 1903 set_stage_tarball_uri() doesn't raise an exception on a blank string.
414 1904
415 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1905 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
416 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1906 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
417 the install profile if available. Commented out spawn() debugging prints 1907 the install profile if available. Commented out spawn() debugging prints
418 1908
419 23 Mar 2005; Preston Cody <codeman@gentoo.org> 1909 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
420 small changes to setup_network_post. moved adding to runlevel of net.x to 1910 small changes to setup_network_post. moved adding to runlevel of net.x to
421 after the device gets symlinked. added domainname runlevel command. 1911 after the device gets symlinked. added domainname runlevel command.
422 1912
423 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1913 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
424 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in 1914 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
425 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to 1915 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
426 spawn() call in livecd-kernel code to pass environment variables. 1916 spawn() call in livecd-kernel code to pass environment variables.
427 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1917 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
428 the install profile if available. 1918 the install profile if available.
429 1919
430 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1920 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
431 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate 1921 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
432 to handle installing the livecd kernel into the new system. 1922 to handle installing the livecd kernel into the new system.
433 1923
434 22 Mar 2005; Preston Cody <codeman@gentoo.org> 1924 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
435 should emerge hotplug and coldplug before adding them to runlevel. 1925 should emerge hotplug and coldplug before adding them to runlevel.
436 1926
437 21 Mar 2005; Preston Cody <codeman@gentoo.org> 1927 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
438 took chroot out of grub_install command. 1928 took chroot out of grub_install command.
439 1929
440 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1930 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
441 Changed chroot wrapper code in spawn() to write the wrapper the python way 1931 Changed chroot wrapper code in spawn() to write the wrapper the python way
442 instead of the bash way to avoid quote conflicts. Added 1932 instead of the bash way to avoid quote conflicts. Added
443 'logfile=self._compile_logfile' to a number of spawn() calls. Added new 1933 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
444 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh' 1934 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
445 as it breaks the piping. 1935 as it breaks the piping.
446 1936
447 20 Mar 2005; Preston Cody <codeman@gentoo.org> 1937 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
448 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo. 1938 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
449 1939
450 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1940 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
451 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in 1941 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
452 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and 1942 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
453 GLIInstallProfile. 1943 GLIInstallProfile.
454 1944
455 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1945 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
456 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs 1946 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
457 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved 1947 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
458 into /mnt/gentoo in prepare_chroot() 1948 into /mnt/gentoo in prepare_chroot()
459 1949
460 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1950 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
461 Add sigunmask.c contributed by d_m (on freenode) to counteract python's 1951 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
462 retarted behavior regarding threads and signals. Add code to convert MB/%/* 1952 retarted behavior regarding threads and signals. Add code to convert MB/%/*
463 to start/end sectors 1953 to start/end sectors
464 1954
465 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1955 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
466 Add 2>&1 to cmd in spawn() 1956 Add 2>&1 to cmd in spawn()
467 1957
468 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1958 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
469 Modified GLIUtility.exitsuccess() to work with return value from 1959 Modified GLIUtility.exitsuccess() to work with return value from
470 commands.getstatusoutput instead of os.waitpid(). spawn() automatically 1960 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
471 creates wrapper script for commands run inside chroot so multiple commands 1961 creates wrapper script for commands run inside chroot so multiple commands
472 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x' 1962 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
473 for the generated script from spawn() 1963 for the generated script from spawn()
474 1964
475 16 Mar 2005; Preston Cody <codeman@gentoo.org> 1965 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
476 Removed default values for stage tarball URI and portage tree URI from 1966 Removed default values for stage tarball URI and portage tree URI from
477 InstallProfile. These should be set by the FEs. also added services step to 1967 InstallProfile. These should be set by the FEs. also added services step to
478 ArchTemplate and coldplug/hotplug runlevels to the genkernel step. 1968 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
479 Possibly fixed CC DHCP bug with -n. (thx agaffney) 1969 Possibly fixed CC DHCP bug with -n. (thx agaffney)
480 1970
481 14 Mar 2005; Preston Cody <codeman@gentoo.org> 1971 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
482 Small fix for setting the default gateway. Also added feature to dialogfe. 1972 Small fix for setting the default gateway. Also added feature to dialogfe.
483 1973
484 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1974 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
485 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid 1975 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
486 1976
487 1 Mar 2005; Preston Cody <codeman@gentoo.org> 1977 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
488 Fixed a bunch of true -> True typos. lots of em 1978 Fixed a bunch of true -> True typos. lots of em
489 only write new resolv.conf if there are dns servers listed. 1979 only write new resolv.conf if there are dns servers listed.
490 1980
491 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1981 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
492 Commented out 'display_on_tty8=True' in start_portmap() 1982 Commented out 'display_on_tty8=True' in start_portmap()
493 1983
494 18 Feb 2005; Preston Cody <codeman@gentoo.org> 1984 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
495 added progress bar to dialogfe and fix logger bug in ArchTemplate. 1985 added progress bar to dialogfe and fix logger bug in ArchTemplate.
496 1986
497 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1987 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
498 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved 1988 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
499 lang parameter to __init__() 1989 lang parameter to __init__()
500 1990
501 10 Feb 2005; Preston Cody <codeman@gentoo.org> 1991 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
502 updates to TODO list. 1992 updates to TODO list.
503 1993
504 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1994 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
505 Initial code for quickpkg GRP support. Fix loop to grab packages from 1995 Initial code for quickpkg GRP support. Fix loop to grab packages from
506 'emerge -p blah' 1996 'emerge -p blah'
507 1997
508 6 Feb 2005; Preston Cody <codeman@gentoo.org> 1998 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
509 check for dhcp in the network stuff and emerge it if it is. 1999 check for dhcp in the network stuff and emerge it if it is.
510 added quickpkg to TODO list 2000 added quickpkg to TODO list
511 2001
512 5 Feb 2005; Preston Cody <codeman@gentoo.org> 2002 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
513 Changed the raising of 'warning' exceptions to a simple log of the error 2003 Changed the raising of 'warning' exceptions to a simple log of the error
514 so that the installer can continue. 2004 so that the installer can continue.
515 2005
516 3 Feb 2005; Preston Cody <codeman@gentoo.org> 2006 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
517 Some big changes. First, changed most output to display_on_tty8. 2007 Some big changes. First, changed most output to display_on_tty8.
518 Second, added log lines to all templates. Some smaller fixes such as typos. 2008 Second, added log lines to all templates. Some smaller fixes such as typos.
519 Also did some cleanups of old commented lines. 2009 Also did some cleanups of old commented lines.
520 2010
521 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 2011 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
522 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban. 2012 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
523 Undo change with fix. Escaping fix in GLIStorageDevice.py 2013 Undo change with fix. Escaping fix in GLIStorageDevice.py
524 2014
525 31 Jan 2005; Preston Cody <codeman@gentoo.org> 2015 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
526 more updates to TODO list. hopefully we'll soon start removing items instead 2016 more updates to TODO list. hopefully we'll soon start removing items instead
527 of adding them. 2017 of adding them.
528 2018
529 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2019 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
530 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works 2020 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
531 2021
532 27 Jan 2005; Preston Cody <codeman@gentoo.org> 2022 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
533 updated TODO list. (again) 2023 updated TODO list. (again)
534 2024
535 25 Jan 2005; Preston Cody <codeman@gentoo.org> 2025 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
536 changed output of portmap start to display_on_tty8. 2026 changed output of portmap start to display_on_tty8.
537 fixed bootloader for udev and multiple kernels 2027 fixed bootloader for udev and multiple kernels
538 fixed custom kernel config (again) 2028 fixed custom kernel config (again)
539 2029
540 22 Jan 2005; Preston Cody <codeman@gentoo.org> 2030 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
541 changed default value of CC._enable_ssh to True because this is smart. 2031 changed default value of CC._enable_ssh to True because this is smart.
542 added code to allow custom kernel .config. may be unstable and break. sorry. 2032 added code to allow custom kernel .config. may be unstable and break. sorry.
543 2033
544 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2034 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
545 partition() now waits until after it checks for partition flags before delete 2035 partition() now waits until after it checks for partition flags before delete
546 the partitions :P 2036 the partitions :P
547 2037
548 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2038 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
549 Updated TODO. swapon failure it temporarily not an error. swapon is an error 2039 Updated TODO. swapon failure it temporarily not an error. swapon is an error
550 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't 2040 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
551 blank. 2041 blank.
552 2042
553 19 Jan 2005; Preston Cody <codeman@gentoo.org> 2043 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
554 Various fixes related to the add_users function. Still not yet finished. 2044 Various fixes related to the add_users function. Still not yet finished.
555 Added things to the TODO list. Lets start using that! 2045 Added things to the TODO list. Lets start using that!
556 2046
557 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2047 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
558 Added code to x86Template to format newly created partitions. Also added 2048 Added code to x86Template to format newly created partitions. Also added
559 some error checking code. GLIStorageDevice passes 'minor' with data to 2049 some error checking code. GLIStorageDevice passes 'minor' with data to
560 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS 2050 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
561 mounting code. 2051 mounting code.
562 2052
563 18 Jan 2005; Preston Cody <codeman@gentoo.org> 2053 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
564 Took out unnecessary setting of random livecd root password. the cd already 2054 Took out unnecessary setting of random livecd root password. the cd already
565 sets it randomly. 2055 sets it randomly.
566 2056
567 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2057 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
568 Took out an unneeded step from CC's run() 2058 Took out an unneeded step from CC's run()
569 2059
570 15 Jan 2005; Preston Cody <codeman@gentoo.org> 2060 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
571 Attempt at detecting and adding windows partitions to lilo. 2061 Attempt at detecting and adding windows partitions to lilo.
572 2062
573 14 Jan 2005; Preston Cody <codeman@gentoo.org> 2063 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
574 Added lilo code and cleaned up lilo code. also do_partitioning renamed to 2064 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
575 partition. fixed misc exit_status => exitstatus typo. 2065 partition. fixed misc exit_status => exitstatus typo.
576 2066
577 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2067 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
578 Added basic code for resizing filesystems with pyparted. Fixed code for 2068 Added basic code for resizing filesystems with pyparted. Fixed code for
579 resizing ntfs and ext2/3. 2069 resizing ntfs and ext2/3.
580 2070
581 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2071 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
582 Fixed partition() in x86Template so that it scans through logicals and deletes 2072 Fixed partition() in x86Template so that it scans through logicals and deletes
583 before deleting containing extended partition. Also clears partition table to 2073 before deleting containing extended partition. Also clears partition table to
584 be safe before third pass. 2074 be safe before third pass.
585 2075
586 08 Jan 2005; Preston Cody <codeman@gentoo.org> 2076 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
587 Added mount_network_shares. not able to test it from this computer. 2077 Added mount_network_shares. not able to test it from this computer.
588 will test when i get back to school. 2078 will test when i get back to school.
589 also added start_portmap to the client_controller as an always-do. 2079 also added start_portmap to the client_controller as an always-do.
590 agaffney says this is needed for NFS mounts to work. 2080 agaffney says this is needed for NFS mounts to work.
591 2081
592 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2082 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
593 Partial rewrite of partitioning code in x86Template. No longer shells out to 2083 Partial rewrite of partitioning code in x86Template. No longer shells out to
594 parted to perform actions, now uses all pyparted calls. Code "works" in a 2084 parted to perform actions, now uses all pyparted calls. Code "works" in a
595 test, but still needs lots of TLC. Also modified tests/install.py to work 2085 test, but still needs lots of TLC. Also modified tests/install.py to work
596 with x86Template and GLIClientConfiguration. 2086 with x86Template and GLIClientConfiguration.
597 2087
598 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2088 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
599 Initial move of partitioning code from ArchTemplate to x86Template. 2089 Initial move of partitioning code from ArchTemplate to x86Template.
600 2090
601 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2091 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
602 Added grp_install and services to InstallProfile. forgot about the set_root_password 2092 Added grp_install and services to InstallProfile. forgot about the set_root_password
603 2093
604 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2094 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
605 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney. 2095 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
606 Test Install ran very well (skipping partitioning). 2096 agaffney. Test Install ran very well (skipping partitioning).
607 2097
608 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2098 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
609 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot 2099 My mid-day update. rewrote mount_local_partitions for order of mounting.
610 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs. 2100 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
611 some may still have eluded me. 2101 partition format. fixed a few _edit_configs. some may still have eluded me.
612 2102
613 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2103 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
614 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it. 2104 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
2105 to test it.
615 Just finished mount_local_partitions in GLIArchitectureTemplate 2106 Just finished mount_local_partitions in GLIArchitectureTemplate
616 2107
617 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2108 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
618 Added get_num_sectors() to GLIStorageDevice. 2109 Added get_num_sectors() to GLIStorageDevice.
619 2110
620 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2111 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
621 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders. 2112 GLIStorageDevice now tracks partition boundaries in sectors instead of
2113 cylinders.
622 Also now ignores <=100 sectors for free space. Removed remaining depends stuff 2114 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
623 from GLIInstallProfile. 2115 from GLIInstallProfile.
624 2116
625 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2117 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
626 GLIStorageDevice returns "unknown" instead of "" for get_type() 2118 GLIStorageDevice returns "unknown" instead of "" for get_type()
627 2119
628 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2120 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
629 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to 2121 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
630 actually work. Commented out resizability checking code for speed. 2122 actually work. Commented out resizability checking code for speed.
631 2123
632 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2124 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
633 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in 2125 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
634 GLIStorageDevice at the suggestion of plors 2126 in GLIStorageDevice at the suggestion of plors
635 2127
636 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2128 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
637 Added a function to GLIUtility to pull a value from a make.conf-style config 2129 Added a function to GLIUtility to pull a value from a make.conf-style config
638 file. Minor type fix to GLIInstallProfile.py 2130 file. Minor type fix to GLIInstallProfile.py
639 2131
640 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2132 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
641 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated 2133 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
642 network mounts from partition data structure in GLIInstallProfile 2134 Separated network mounts from partition data structure in GLIInstallProfile
643 2135
644 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> 2136 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
645 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem 2137 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
646 can be resized. 2138 can be resized.
647 2139
648 27 Oct 2004; Preston Cody <codeman@gentoo.org> 2140 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
649 Added some of the final functions to GLIInstallTemplate. 2141 Added some of the final functions to GLIInstallTemplate.
650 Yes this project is still active despite rare use of the Changelog! 2142 Yes this project is still active despite rare use of the Changelog!
651 2143
652 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2144 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
653 Added the GLIPartitionTools.py file. This is a temporary insertion of 2145 Added the GLIPartitionTools.py file. This is a temporary insertion of
654 partitioning tools that will eventually go into their own package. 2146 partitioning tools that will eventually go into their own package.
655 2147
656 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2148 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
657 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time 2149 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
658 for the program). Added __init__(install_profile, client_configuration) to 2150 run-time for the program). Added __init__(install_profile,
659 GLI.InstallProfile. This sets install_profile and client_configuration once so as 2151 client_configuration) to GLI.InstallProfile. This sets install_profile and
660 to avoid constantly passing stuff every time we call a method. 2152 client_configuration once so as to avoid constantly passing stuff every time
2153 we call a method.
661 2154
662 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2155 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
663 2156
664 Added another private method to GLI.InstallTemplate. _edit_config() modifies config 2157 Added another private method to GLI.InstallTemplate. _edit_config() modifies
665 files without messing up all the other stuff in them. This will be used for making 2158 config files without messing up all the other stuff in them. This will be
666 changes to make.conf, rc.conf, /etc/conf.d/net, etc... 2159 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
667 2160
668 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2161 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
669 2162
670 Added GLI.InstallTemplate framework. This is not yet functional. However, it does 2163 Added GLI.InstallTemplate framework. This is not yet functional. However,
671 have a few basic things. I added two private methods. One is _depends(). This 2164 it does have a few basic things. I added two private methods. One is
672 will be used for dependency checking (ie. unpacking a tarball requires that 2165 _depends(). This will be used for dependency checking (ie. unpacking a
673 partitioning has been done). The other is _exec_in_chroot(). This is the exact 2166 tarball requires that partitioning has been done). The other is
674 same syntax as os.system(), however, instead of being run in the liveCD 2167 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
675 environment, it runs in the chroot. This requires a bit of fork() magic, so I 2168 instead of being run in the liveCD environment, it runs in the chroot. This
676 isolated the code. Hope to work more this week to get this class formed... 2169 requires a bit of fork() magic, so I isolated the code. Hope to work more
2170 this week to get this class formed...
677 2171
678 14 Feb 2004; Eric Sammer <esammer@gentoo.org> 2172 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
679
680 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for 2173 Added SAX parsing. Made GLI.InstallProfile a subclass of
681 obvious reasons. Switched kernel_modules and users to be lists instead of tuples 2174 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
682 to allow for easier modification (mutable, rather than immutable objects). Updated 2175 to be lists instead of tuples to allow for easier modification (mutable,
683 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse(). 2176 rather than immutable objects). Updated existing pydoc and added more.
2177 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
684 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references. 2178 GLI.py a bit. Fixed all accessors to use self references.
685 Added initial unit test code. 2179 Added initial unit test code.
686 2180
687 9 Feb 2004; Eric Sammer <esammer@gentoo.org> 2181 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
688
689 Added initial changelog. Setting up the basic structure of the CVS repository 2182 Added initial changelog. Setting up the basic structure of the CVS repository
690 for the project. Added the UML class diagram in docs. Added a skeletal GLI 2183 for the project. Added the UML class diagram in docs. Added a skeletal GLI
691 python module. Added misc files such news, authors, etc. 2184 python module. Added misc files such news, authors, etc.

Legend:
Removed from v.698  
changed lines
  Added in v.1895

  ViewVC Help
Powered by ViewVC 1.1.20