/[gli]/trunk/ChangeLog
Gentoo

Diff of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 787 Revision 1900
1# ChangeLog for Gentoo Linux Installer 1# ChangeLog for Gentoo Linux Installer
2# Copyright 2005 Gentoo Technologies, Inc. 2# Copyright 2005-2008 Gentoo Foundation; Distributed under the GPL v2
3# $Id: $
3 4
4# $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.314 2005/08/05 01:51:56 agaffney Exp $ 5 13 May 2008; Andrew Gaffney <agaffney@gentoo.org>
6 src/fe/gtk/PartProperties.py:
7 Check for -1 from get_extended_partition() instead of 0 Disable Type
8 dropdown all together for disklabel types that don't support extended
9 partitions
5 10
6*GLI-0.1_alpha (4 Apr 2005) 11 17 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
12 src/GLIArchitectureTemplate.py:
13 We don't need to extract metadata.tar.bz2 anymore
7 14
15 16 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/fe/gtk/Timezone.py:
16 Remove text referring to UTC
17
18 09 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
19 src/GLIInstallProfile.py:
20 Add alsa-utils to package list
21
22 07 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> bin/installer-dialog,
23 bin/installer-gtk:
24 Pass on arguments from commandline
25
26 07 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
27 src/fe/gtk/ProgressDialog.py:
28 Truncate progress bar status text at 80 characters
29
30 06 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
31 src/GLIArchitectureTemplate.py:
32 Add checking for non-blank local filesystems after mounting
33
34 06 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
35 src/GLIArchitectureTemplate.py:
36 Update post-install networking config to use newer conf.d/net syntax
37
38 05 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
39 src/GLIArchitectureTemplate.py:
40 run sed on copied make.conf to remove lines that start with ##
41
42 04 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/Partitioning.py:
43 Modify order of extended check in partitioning code so that it works
44
45 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
46 sync dynamic-stage3 code in GLIPortage with GLIArch
47
48 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
49 src/GLIArchitectureTemplate.py:
50 Create /dev/tty1 with dynamic stage3
51
52 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org>
53 src/GLIArchitectureTemplate.py, src/GLIPortage.py,
54 src/fe/dialog/gli-dialog.py:
55 Switch to running vdb_to_fake_binrepo.py instead of reading systempkgs.txt
56 remove all references to systempkgs.txt
57
58 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org> -src/runtimedeps.py,
59 +src/vdb_to_fake_binrepo.py:
60 Add vdb_to_fake_binrepo.py script from the always awesome zmedico
61
62 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
63 force livecd and bindist USE
64
65 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org>
66 src/GLIArchitectureTemplate.py:
67 add in metadata_overlay for faster dep calculation
68
69 26 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
70 src/fe/gtk/ExtraPackages.py:
71 comment out kernelpkgs stuff in gtkfe
72
73 25 Nov 2007; Preston Cody <codeman@gentoo.org>
74 src/fe/dialog/gli-dialog.py:
75 adding commmand-line option for advanced mode which allows full functionality.
76
77 18 Nov 2007; Preston Cody <codeman@gentoo.org>
78 src/fe/dialog/gli-dialog.py:
79 attempting to throw in kernpkgs support. will see how this goes.
80
81 18 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
82 src/fe/gtk/OtherSettings.py:
83 pre-create conf.d/xdm
84
85 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIUtility.py:
86 use proper file name for kernel packages
87
88 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
89 src/fe/gtk/Networking.py:
90 s/install_logger/install_logging_daemon/
91
92 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
93 src/fe/gtk/LocalMounts.py:
94 import GLIUtility
95
96 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/fe/gtk/gtkfe.py:
97 start with Partitioning screen
98
99 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
100 src/fe/gtk/ExtraPackages.py, src/fe/gtk/LocalMounts.py,
101 src/fe/gtk/Networking.py, src/fe/gtk/OtherSettings.py,
102 src/fe/gtk/RootPass.py, src/fe/gtk/Timezone.py, src/fe/gtk/gtkfe.py:
103 rearrange a bit of code for gtkfe networkless-only transition
104
105 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
106 src/GLIUtility:
107 add get_kernpkgs_from_cd() function
108
109 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
110 src/GLIInstallProfile.py:
111 add xdm, gdm, and kdm to package list
112
113 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
114 src/fe/dialog/gli-dialog.py:
115 modify root mountpoint check in gli-dialog to use a for/else and notify the
116 user why they're not being allowed to leave the screen
117
118 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
119 src/templates/x86ArchitectureTemplate.py:
120 move around parentheses to fix bug 179528
121
122 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
123 src/fe/gtk/InstallFailed.py:
124 correct bugzilla location for bug 178144
125
126 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
127 src/GLIArchitectureTemplate.py, src/fe/gtk/gtkfe.py:
128 fix error in debug mode for bug 178475
129 force install_type to networkless for gtkfe
130
131 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
132 src/GLIArchitectureTemplate.py:
133 set TIMEZONE in /etc/conf.d/clock for bug 158882
134
135 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
136 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
137 src/fe/gtk/InstallFailed.py, src/fe/gtk/gtkfe.py:
138 make install log location consistent throughout code
139 'View Log' button in gtkfe now looks for active and failed log
140
141 04 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org>
142 src/GLIInstallProfile.py:
143 Added x11-themes/gentoo-artwork-livecd to the list of extra packages.
144
145 04 Jan 2007; Preston Cody <codeman@gentoo.org>
146 ClientController:
147 took out the preinstall steps. these will now be handled by the frontends.
148 The actual code for the steps can be put in GLIUtility if necessary.
149 IP:
150 Took out partitioning. Added mounts.
151 Moved root mount point over from CF
152 Removed RP-PPPoE. was never used.
153 AT:
154 reordered functions. removed references to the client-config
155 fixed fstab and other locations that used mountpoints to use the new mounts.
156 removed unused rc.conf function.
157 other smaller touchups.
158 gli-dialog:
159 install_profile() to self._install_profile
160 fix reference to arch instaed of self._arch
161 x86AT:
162 fixed code to use mounts instead of partitioning.
163
164 01 Jan 2007; Preston Cody <codeman@gentoo.org>
165 fixing all instances of WINDOWSKEYS to WINDOWKEYS
166 added space in AT debug line.
167 more general updates in an effort to get the code functional
168
169 29 Oct 2006; Preston Cody <codeman@gentoo.org>
170 gli-dialog:
171 more rearranging of code. Tossed the review menu and not calling show_settings
172 not sure how those are going to turn out just yet.
173
174 22 Oct 2006; Andrew Gaffney <agaffney@gentoo.org>
175 src/Partitioning.py:
176 first round of refactoring for Partitioning.py (was GLISD)
177
178 22 Oct 2006; Preston Cody <codeman@gentoo.org>
179 gli-dialog:
180 added in the rest of the code from GLIGenDialog.
181 will start picking at it now.
182 moved the early questions such as advanced_mode/networkless
183 into functions in the GLIDialog class.
184
185 21 Oct 2006; Preston Cody <codeman@gentoo.org>
186 ClientController and gli-dialog and GLIGenDialog:
187 removing GenDialog, this code will be put into gli-dialog
188 moving some ClientController code into gli-dialog as well.
189 this is only the beginning :)
190
191#------------------------------------------
192# GLI SWITCHES TO SVN.
193
194 15 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
195 src/GLIArchitectureTemplate.py:
196 use _wait_for_device_node() any place we were looping and checking before
197
198 13 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
199 src/GLIArchitectureTemplate.py:
200 add _wait_for_device_node()
201 src/GLIPortage.py:
202 raise an exception in get_deps() if pkglist is empty
203 -k option to install livecd-kernel to shut up wolf31o2 :P
204
205 11 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
206 src/GLIArchitectureTemplate.py:
207 break after installing 1 mta in install_mta()
208
209 10 Sep 2006; Preston Cody <codeman@gentoo.org>
210 src/GLIGenDialog.py:
211 rewrote how the USE flags work so that they are written correctly in relation
212 to the system's USE flags.
213 added a while condition on setting a user password
214 src/GLIArchitectureTemplate.py:
215 adding a self._mounted_devices to keep track of mounted partitions.
216 When cleaning up, only unmount these partitions. Not yet tested.
217
218 10 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
219 src/GLIStorageDevice.py:
220 properly identify apple_bootstrap partitions
221
222 9 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
223 src/GLIStorageDevice.py:
224 pay attention to 'ignoredparts' when reading partition table
225
226 3 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
227 src/GLIArchitectureTemplate.py:
228 force conversion of 'mb' to long
229
230 2 Sep 2006; Preston Cody <codeman@gentoo.org>
231 Lots of internationalization fixes. Point to a translation path called
232 languages in the dialog directory. Generated and added .pot files.
233 Added gettext to GLIIP for package descriptions.
234
235 01 Sep 2006; Chris Gianelloni <wolf31o2@gentoo.org>
236 src/GLIInstallProfile.py:
237 Added some more applications to the Extra Packages list.
238
239 1 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
240 src/templates/ppcArchitectureTemplate.py:
241 this doesn't need to inherit from x86AT or create an infinite loop by calling
242 its own __init__()
243 src/GLIArchitectureTemplate.py,src/templates/x86ArchitectureTemplate.py:
244 move partitioning code to GLIAT
245
246 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
247 src/GLIArchitectureTemplate.py:
248 pass quotes_around_value=False when adding default route to conf.d/net
249
250 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
251 src/GLIArchitectureTemplate.py:
252 copy backup custom.conf from livecd if present
253
254*GLI-0.4 (31 Jul 2006)
255
256 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
257 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
258 doing the testing and coming up with the patch.
259
260 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
261 src/GLIArchitectureTemplate.py:
262 skip blank entries/files in update_config_files()
263
264 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
265 src/templates/x86ArchitectureTemplate.py:
266 move logical clipping logic a bit
267
268 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
269 I've commented out most of the code that used launch. It wasn't working and
270 we don't have the time to fix it before the release. I'll look into it after
271 the release and make it more robust and flexible.
272
273 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
274 src/templates/x86ArchitectureTemplate.py:
275 clip logical partition at end of extended
276
277 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
278 src/GLIInstallProfile.py:
279 Added a few more applications to the list of extra packages to be merged,
280 all from various GRP sets.
281
282 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
283 Added launch variable to the end of each try-run with auth, which should
284 cause this to function properly. Of course, more testing is needed.
285
286 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
287 Fix a missed space in the installer script.
288
289 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
290 src/GLIClientConfiguration.py:
291 adding 'None' with capital N so that the frontends can parse the network type
292
293 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
294 src/GLIClientController.py:
295 log version-stamp
296
297 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
298 Updated the installer script to allow specifying the front-end to run from
299 the command line. Currently, it only supports dialog and gtk. It still needs
300 some testing, however.
301
302 9 July 2006; Preston Cody <codeman@gentoo.org>
303 src/GLIGenDialog.py:
304 make lilo only show up for x86 if non-networkless
305
306 25 Jun 2006; Preston Cody <codeman@gentoo.org>
307 src/GLIGenDialog.py:
308 adding code to auto-add doscsi if a scsi drive detected.
309 this code is also in the gtkfe already
310
311 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
312 src/GLIPortage.py:
313 pass proper PORTAGE_TMPDIR
314
315 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
316 src/GLIUtility.py:
317 fix list_mirrors() to ignore <uri> lines that don't end on the same line
318
319 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
320 Added code to the mta step in AT to parse the install packages list and
321 look for mtas and if it finds it emerge it.
322 Initial attempt at moving extra_packages early in the setup to only show
323 local USE flags relating to those packages.
324 .. abandoned local USE project. no right way to do it.
325
326 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
327 src/GLIUtility.py:
328 minor tweak to regex for parsing mirrors.xml
329
330 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
331 src/templates/x86ArchitectureTemplate.py:
332 make use of strict_start and strict_end in partition recreation
333
334 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
335 src/templates/x86ArchitectureTemplate.py:
336 add strict_start and strict_end parameters to _add_partition()
337 add _find_current_minor_for_part() function to help with resizing
338 fix logical/extended logic in _partition_delete_step()
339 in _partition_resize_step(), delete, recreate at new size, resize, delete
340 call resize2fs with no size argument so it fills entire partition
341 more logging
342 only delete, recreate, resize, delete if growing
343 pass new size to resize2fs in K
344
345 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
346 src/GLIStorageDevice.py:
347 call reorder_minors() from tidy_partitions() instead of
348 set_partitions_from_disk()
349 add code to reorder_minors() to take extended/logical into consideration with
350 non-free partitions
351
352 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
353 added a check of the length of the directory in /usr/src if under 6 characters
354 should fix bug 131809
355
356 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
357 src/GLIArchitectureTemplate.py:
358 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
359 and livecd-kernel
360
361 16 Apr 2006; Preston Cody <codeman@gentoo.org>
362 src/GLIGenDialog.py:
363 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
364
365 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
366 src/GLIInstallProfile.py:
367 change kernel-modules to not be so stupid
368
369 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
370 GLIMD: fix display problem with execute.pyhtml.
371 make tables better.
372
373 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
374 src/GLIInstallProfile.py:
375 fix handling of int/float for minor
376 src/templates/x86ArchitectureTemplate.py:
377 save/restore partition name
378 src/GLIStorageDevice.py:
379 support for partition name
380
381 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
382 touchups to add_profile in GLIMD to link to webgli
383 add a save to GLIMD profile button in webgli's saveprofile
384 gliserv.py:
385 initial attempt at custom networking info per client. hostname support only.
386
387 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
388 src/net/server/html/webgli/partitioning[234].pyhtml:
389 small fixes for new partioning code
390
391 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
392 src/GLIClientController.py:
393 record PID of secondary thread
394
395 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
396 src/GLIGenDialog.py:
397 small fix for new partitioning code
398
399 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
400 src/GLIStorageDevice.py:
401 add get_devnode()
402 fix up detect_devices() to detect cciss/ida arrays
403 src/templates/x86ArchitectureTemplate.py:
404 use get_devnode() instead of figuring out the devnode
405 skip first 3 steps if partition layout hasn't changed
406 wipe disk and create new disklabel before recreating partitions
407 src/GLIArchitectureTemplate.py:
408 use get_devnode() in local mount and fstab stuff
409
410 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
411 src/GLIStorageDevice.py:
412 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
413
414 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
415 src/templates/x86ArchitectureTemplate.py:
416 continue breakup/cleanup of partitioning code
417
418 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
419 src/GLIStorageDevice.py:
420 set disklabel to default for arch when clearing the partition table
421 src/templates/x86ArchitectureTemplate.py:
422 complete rewrite of first and second passes
423
424 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
425 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
426 allow iterating over Device object to get partitions
427
428 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
429 src/GLIStorageDevice.py:
430 allow access to Device object like a dict
431
432 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
433 src/GLIStorageDevice.py:
434 allow access to Partition object like a dict
435
436 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
437 src/templates/x86ArchitectureTemplate.py:
438 fail if any filesystems are mounted on the device being partitioned
439
440 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
441 src/GLIStorageDevice.py:
442 reorder minor numbers when loading partitions from disk to match the physical
443 partition order
444
445 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
446 src/GLIStorageDevice.py:
447 overhaul for supporting mac disklabels and partitions out of disk order
448 remove free space from inside extended partition when extended is removed
449
450 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
451 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
452 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
453 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
454 Added bash scripts, icons, and desktop entries from the ebuild to make my
455 life easier.
456
457 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
458 src/GLIStorageDevice.py:
459 raise an exception if the existing partitions are out of disk order
460 look for minors out of order instead of disk position
461
462 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
463 src/fe/dialog/gli-dialog and src/GLIGenDialog:
464 added networkless mode to gli-dialog.
465
466 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
467 src/templates/x86AT:
468 add windows detection code for grub. untested.
469
470 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
471 src/templates/x86ArchitectureTemplate.py:
472 bootloader and partitioning external commands log to compile_output.log
473 wait for device node to exist before resizing
474 add -v to ntfsresize command
475 src/GLIStorageDevice.py:
476 return start/end with ip structure
477 pad min ntfs size by 50 MB just to be safe
478 src/GLIArchitectureTemplate.py:
479 only install filesystem tools for partitions with a mountpoint
480
481 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
482 add error catching and text to saving profile dialogs
483
484 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
485 src/GLIPortage.py:
486 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
487 src/templates/x86ArchitectureTemplate.py:
488 fix checks for changed partitions so they will actually get deleted
489
490 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
491 src/GLIClientController.py:
492 slightly better error handling for pre-install failures
493
494 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
495 src/templates/x86ArchitectureTemplate.py:
496 proper return code checking for ext2/3 resizing
497
498 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
499 src/GLIClientController.py:
500 accept 'none' as well as 'null' for network type
501 src/GLIArchitectureTemplate.py:
502 ignore extended partitions in mount_local_partitions()
503 src/templates/x86ArchitectureTemplate.py:
504 use get_ordered_partition_list() instead of keys().sort() for new_part_list
505 check to make sure start sector for primary isn't less than end sector for
506 previous extended
507 src/GLIClientController.py:
508 write dns servers to /etc/resolv.conf
509
510 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
511 src/GLIPortage.py:
512 copy_pkg_to_chroot() uses compile_output.log for command output
513
514 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
515 only keep a 1000 line 'scrollback' buffer for the compile output and log file
516
517 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
518 src/GLIPortage.py:
519 add code make GLIPortage.py capable of being run stand-along for dynamic
520 stage3 generation and copying packages in a GRP-ish way
521 grp code fixups
522
523 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
524 src/GLIPortage.py:
525 ignore blank packages passed to get_deps() and emerge()
526
527 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
528 src/GLIUtility.py:
529 add get_chosts() function
530
531*GLI-0.3 (12 Feb 2006)
532
533 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
534 src/templates/x86ArchitectureTemplate.py:
535 pull old start/end sector values from somewhere that actually has them
536 add logic for extended partition to code that makes sure new end sector
537 doesn't overlap start sector of next partitions
538 don't freak out if partition can't be deleted
539
540 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
541 src/GLIPortage.py:
542 run env-update at the end of copy_pkg_to_chroot()
543
544 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
545 src/templates/x86ArchitectureTemplate.py:
546 I'm a complete fscking dumbass. I recorded the end sector for partitions that
547 weren't being touched, but I never used it when recreating them...the end was
548 calculated from the size in MB instead :/
549
550 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
551 src/GLIArchitectureTemplate.py:
552 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
553 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
554 src/GLIPortage.py:
555 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
556 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
557 'resized' flag
558
559 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
560 src/GLIPortage.py:
561 short circuit and check vdb directly if package begins with '='
562
563 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
564 added more packages to extra_packages list in IP
565
566 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
567 src/templates/x86ArchitectureTemplate.py:
568 10 tries to create filesystem instead of 3
569 src/GLIPortage, src/GLIArchitectureTemplate.py:
570 ignore_missing flag for copy_pkg_to_chroot()
571
572 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
573 src/GLIPortage.py:
574 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
575
576 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
577 src/net/server/gliserv.py:
578 fix handling of 404 for real files
579 src/net/server/GLIServerProfile.py:
580 look for 'hostname' in attributes instead of 'name'
581
582 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
583 src/SimpleXMLParser.py:
584 initial support for 'include' in XML files
585 src/GLIStorageDevice.py:
586 initial support for %
587 src/GLIClientController.py:
588 add debugging statements to pre-install steps
589
590 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
591 webgli/configfiles:
592 check for key in etc_files['rc.conf'] to fix key error
593 webgli/timezone: small fix.
594 webgli/extrapackages: list-type fix
595 webgli/services: same
596 glimd: add/edit_client updates.
597
598 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
599 added configure.pyhtml to glimd. minor changes
600 to top and add_client. fixed up showargs.
601 added execute.pyhtml
602 changed register clients line in gliserv for name->hostname.
603 updated TODO.
604
605 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
606 src/net/server/*:
607 added add/del/edit client/profile.pythml for glimd.
608 updated templates, showclients, and gliserv.
609
610 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
611 src/net/server/*:
612 stupid threading module...
613
614 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
615 AT: rc.conf -> conf.d/clock
616
617 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
618 src/GLIPortage.py:
619 show 'Calculating dependencies for ...' in subprogress bar at beginning of
620 emerge()
621 src/GLIArchitectureTemplate.py:
622 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
623 in the chroot
624 remove _quickpkg_deps() and _portage_best_{visible,version}()
625 src/GLIUtility.py:
626 fail immediately in validate_uri() if provided URI can't be parsed
627 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
628 debug code in spawn()
629 use lower-level os.read() instead of file.read() because python sucks
630 src/templates/x86ArchitectureTemplate.py:
631 basic subprogress reporting for partitioning
632 total_steps was 1 too high
633
634 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
635 src/GLIUtility.py:
636 move parse_vdb_contents() to GLIPortage
637 src/GLIPortage.py:
638 remove all symlink fixups
639 ignore 'dir' entries in CONTENTS
640 call tar with -p
641
642 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
643 AT: bootsplash is now gensplash
644 gliserv: add advanced_mode to shared_info
645 webgli: Added advanced mode. mostly just disables a few screens.
646
647 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
648 src/GLIPortage.py:
649 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
650 added emerge()
651 update sub-progress after each package is emerged
652 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
653 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
654 remove link if it exists before moving content into place
655 src/GLIArchitectureTemplate.py:
656 install_packages() now calls emerge() in GLIPortage
657 change all calls to self._emerge() to self._portage.emerge()
658 comment out all emerge status checking...using exceptions now
659 call copy_pkg_to_chroot() directly for livecd-kernel
660
661 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
662 src/GLIArchitectureTemplate.py:
663 remove add_pkg_to_world() and copy_pkg_to_chroot()
664 copy installer.log to installer.log.failed on install failure
665 src/GLIUtility.py:
666 added get_keymaps()
667 spawn() takes any False argument for chroot instead of just None
668 src/GLIPortage.py:
669 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
670 change copy_pkg_to_chroot() to work properly with use_root=False
671 figure PORTAGE_TMPDIR properly
672
673 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
674 src/net/server/html/*:
675 converted showclients, load/saveprofile
676
677 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
678 src/GLIPortage.py:
679 exclude packages already in chroot vdb from binary deplist
680 chroot to use best_version for chroot's vdb
681 src/runtimedeps.py:
682 accept ROOT via commandline instead of env
683
684 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
685 src/runtimedeps.py:
686 remove passing of ROOT
687 src/GLIPortage.py:
688 modify get_deps() to get deptree for each package and merge into final list
689 remove depgraph class
690 add debugging code to get_deps()
691 src/GLIArchitectureTemplate.py:
692 combine code for GRP/compile in install_packages() into one block
693 debugging code in install_packages()
694
695 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
696 src/runtimedeps.py:
697 initial commit
698 src/GLIPortage.py:
699 use separate script for GRP deps
700 remove calls to portage module
701
702 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
703 src/GLIPortage.py:
704 initial commit
705 move some of portage function from GLIAT
706 flipped around a few function args
707 src/GLIArchitectureTemplate.py:
708 revamp install_packages() for new GLIPortage
709
710 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
711 src/GLIArchitectureTemplate.py:
712 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
713
714 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
715 src/net/server/gliserv.py:
716 wrap generated code in a class to isolate it a bit better
717 302 redirects work
718 don't use cgi.escape() for <% %>
719 src/net/server/html/webgli/*:
720 load/save profile
721 src/GLIUtility.py:
722 change /sbin/lspci to just lspci
723
724 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
725 src/GLIClientController.py:
726 change ordering of statements in CC run() while loop to not go past the end
727 of the array
728 src/GLIArchitectureTemplate.py:
729 removed redundant bind mounts
730
731 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
732 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
733 added a diagram by blackace from last night.
734 added the glossary in RTF format.
735
736 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
737 x86AT: separated out emerge/configure from running of bootloader
738 added MBR drive support to lilo.
739 these changes will likely not work.
740 AT: added setup_and_run_bootloader step.
741
742 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
743 src/net/server/gliserv.py:
744 call generated code in a function
745 src/net/server/html/webgli/*:
746 include top/bottom
747 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
748 src/GLIClientCongifuration.py:
749 install mode magic
750
751 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
752 src/GLIClientController.py:
753 use GLIException when there's an import problem
754 added debug code to show install_steps
755 src/templates/amd64ArchitectureTemplate.py:
756 add . to import path
757 proper path this time: ../../templates
758 src/GLIArchitectureTemplate.py:
759 add _portage_best_version() function
760
761 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
762 added initial glossary and gimli diagram to the docs directory.
763 modify gli-dialog to allow editing of the install_profile after loading XML.
764
765 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
766 src/net/server/html/webgli/:
767 converted globaluse, localuse, networkmounts, portagetree, and stageselection
768 moved saveclientconfig stuff into clientconfig
769 moved saveconfigfiles into config files
770 converted etc_portage and makedotconf
771 converted bootloader and kernel
772 convert daemons, extrapackages, networking, review, services, timezone, users
773 src/net/server/gliserv.py:
774 proper 404 handling for .pyhtml extension
775 HTML escape <% %> stuff
776 work around python's sucky regexes
777 src/GLIInstallProfile.py:
778 allow set_{rsync,ftp,http}_proxy() to accept empty values
779
780 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
781 src/net/server/gliserv.py:
782 initial commit of Legolas templating engine
783 302 redirects
784 src/net/server/html/index.html, src/net/server/webgli_template.html:
785 minor changes for new code
786 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
787 initial commit of the conversion from the monolithic WebGLIHandler.py to the
788 one file per path Legolas goodness
789 partitioning[2-4] done
790
791 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
792 webgli: dhcp options in CC and post-install.
793 updated comparison chart.
794 webgli: etc/portage/* and distcc support added. not too-well tested.
795
796 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
797 webgli_template.html: valign=top on left side.
798 webgli: fix bootloader boot_device. now working.
799 webgli: CC proxy done. post-install proxy in progress.
800
801 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
802 src/net/server/webgli_template.html:
803 increase padding for content cell to 7px and add colspan=2
804
805 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
806 webgli: added graphic bar on top
807 webgli: added hover effects on the links on the left
808 webgli: re-rendered header_bg.png to stretch without artifacts
809
810 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
811 webgli: make.conf disabling fixes for dynamic_stage3
812 fixed portage snapshot browse popup
813 all changes tested.
814 webgli: add debug mode to CC screen. the screen still needs lots of work.
815
816 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
817 added debug mode question to gli-dialog
818 added CC proxies to CC networking for gli-dialog
819 webgli: fixed skip CC networking if connection active
820 webgli: portage snapshot defaults to CD
821 webgli: bootloader mbr drive selection
822 webgli: USE flags unselectable if dynamic_stage3
823 webgli: manual extra packages and save button.
824
825 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
826 src/GLIUtility.py:
827 change ping count to 2
828 docs/comparison.html
829 initial commit
830
831 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
832 src/templates/x86ArchitectureTemplate.py:
833 fix map() issue with grub code
834 replace kernel_names and initrd_names loops with one-liners
835
836 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
837 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
838 initial gli-dialog support for recommended partitioning layout and clear.
839 failure cleanup now an option for gli-dialog.
840 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
841 added comparison list and updated TODO!
842
843 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
844 src/GLIArchitectureTemplate.py:
845 fix to stage1() debug code
846 fix to stage2() debug code
847
848 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
849 some more bootloader code fixes. forgot boot_device != mbr_device.
850
851 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
852 src/GLIStorageDevice.py:
853 fix to unallocated space merging when last one is after part 4
854
855 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
856 src/GLIArchitectureTemplate.py:
857 small fix to debugging code in copy_pkg_to_chroot()
858
859 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
860 more bugfixes with bootloader code
861 gli-dialog side appears to work
862
863 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
864 initial adding of boot_device to backend.
865 initial boot_device support added to gli-dialog.
866 some fixes of my poor coding
867
868 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
869 converted gli-dialog to use the install_package_list.
870 gtkfe has already been converted by AllanonJL
871 new way working in gli-dialog now and added to webgli.
872 added set/get_boot_device() to IP
873
874 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
875 get_install_package_list added to InstallProfile. This can be used by the FEs
876
877 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
878 src/templates/x86ArchitectureTemplate.py:
879 call ls with '-1 --color=no'
880
881 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
882 added warning (#9) to GRP ppl about stage3 tarballs
883
884 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
885 src/GLIArchitectureTemplate.py:
886 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
887 confused
888
889 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
890 removed protocols from rc.conf screens
891 finished initial rc.conf and make.conf in webgli
892
893 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
894 src/net/server/gliserv.py:
895 add -h option to usage()
896 show time and request URI in debug mode
897 show client IP in debug mode
898 just use IP instead of trying to do a reverse lookup
899
900 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
901 src/net/server/gliserv.py:
902 'classier' 401 message
903 proper commandline parsing
904 help via -h
905 user/pass can be specificed via commandline option
906
907 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
908 src/net/server/gliserv.py:
909 basic HTTP auth
910
911 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
912 src/net/server/gliserv.py:
913 dynamic module reloading (yipee!)
914 send 'Last-Modified' header for real files
915 respond to HEAD with just headers
916 src/net/server/handlers/WebGLIHandler.py:
917 icons for drives
918
919 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
920 src/net/server/handlers/WebGLIHandler.py:
921 initial 'pretty' partition table display support
922 clicking partition in 'pretty' display works instead of radio buttons
923 radio buttons and pretty display work together
924 META redirect instead of javascript
925 pretty display stretches across entire screen
926 'Recommended layout' and 'Clear drive' functions
927 properly catch exceptions from do_recommended()
928 src/GLIArchitectureTemplate.py:
929 replace preinst, copy, postinst, rm steps with qmerge
930 whoops...that shouldn't have been commented out
931 create image_dir with -p in copy_pkg_to_chroot()
932 more generic of symlink crappiness
933 new copy_pkg_to_chroot() actually works now
934
935 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
936 src/GLIStorageDevice.py:
937 initial generic disk support
938 fixes for add_partition() code
939 src/net/server/handlers/WebGLIHandler.py:
940 added support for creating generic disks
941 add new partition working
942 save and delete partitions
943
944 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
945 webgli: Partitioning making progress.
946
947 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
948 src/GLIArchitectureTemplate.py:
949 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
950 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
951 dir) and works around /etc/gconf symlink problem
952
953 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
954 webgli: lots of updates. preliminary partitioning. extra packages works.
955
956 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
957 src/net/server/gliserv.py:
958 httpd now supports HTTPS and falls back to HTTP if not available
959 make fallback actually work
960 src/net/server/SecureXMLRPCServer.py:
961 SecureSocketServer is now threaded
962
963 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
964 src/net/client/gliclient.py:
965 try to use HTTPS for XMLRPC first and fallback to HTTP
966 pretend mode
967 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
968 HTTPS XMLRPC goodness from samyron
969 pass name of certificate
970
971 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
972 wegli: daemons and services screens done.
973
974 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
975 webgli: networking and users screens
976 added return_redirect to handler.py
977 loading and saving install/client profiles works for webgli now
978 Review also done
979
980*GLI-0.2 (27 Oct 2005)
981
982 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
983 src/templates/x86ArchitectureTemplate.py:
984 properly check for bootloader emerge exist status with exitsuccess()
985 log output of grub install command
986 add --batch --no-floppy to grub command
987 grubinstallstring only gets logged if debug is on
988 src/GLIUtility.py:
989 update progress bar to 100% when process finishes
990
991 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
992 src/GLIClientController.py:
993 added debugging code for the interaction between the 2 threads via Event()
994 src/GLIUtility.py:
995 doubled the buffer size in spawn()
996 bump buffer size up to 16384
997 only report progress in 5% increments
998 src/GLIArchitectureTemplate.py:
999 kernelpkgs.txt support code
1000 above disabled because it sucks
1001 added add_pkg_to_world()
1002
1003 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1004 src/GLIArchitectureTemplate.py:
1005 use tar | tar to copy files in copy_pkg_to_chroot()
1006 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
1007
1008 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
1009 DEBUGGING ADDED TO AT. verbose field added to CConfig.
1010
1011 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1012 src/net/server/gliserv.py:
1013 / maps to index.html
1014 look for actual files in html/
1015 src/net/html:
1016 new template
1017 src/GLIUtility.py:
1018 added parse_vdb_contents()
1019 src/GLIArchitectureTemplate.py:
1020 added copy_pkg_to_chroot()
1021 added debug code to dynamic-stage3
1022 switch dynamic-stage3 to new method
1023 lots of bug fixes from adding debug code
1024
1025 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
1026 webgli initial bootloader support + changed make.conf.
1027 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
1028
1029 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1030 src/GLIUtility.py:
1031 horrible tangled mess of code that is tarball unpacking subprogress display
1032 add unpack progress to portage snapshot
1033 use read() instead of readlines() in spawn()
1034 only update progress bar for whole percents
1035
1036 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1037 src/templates/x86ArchitectureTemplate.py:
1038 change call to 'grub' to use GLIUtility.exitsuccess()
1039 add definition of 'build_mode' in _configure_lilo()
1040 src/misc/updategtkfe, src/misc/updateglid:
1041 fix so subshell is called in root shell
1042
1043 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1044 src/net/server/handlers/WebGLIHandler.py:
1045 stage screen launches URI browser in sized window with various properties set
1046
1047 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1048 src/misc/updategtkfe:
1049 updated to actually work
1050 remove previous snapshot and extracted dir before downloading
1051 src/misc/updateglid:
1052 updated to actually work
1053 src/templates/x86ArchitectureTemplate.py:
1054 fixed bug where grub code was looking for 'root+root+file_name2'
1055
1056 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1057 src/net/server/handlers/WebGLIHandler.py:
1058 URI browser
1059 added mirror selection
1060 src/GLIUtility.py:
1061 ls via ssh strips off ending *
1062
1063 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
1064 more updates to webgli. stage selection.
1065
1066 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
1067 updated webgli with preliminary Network Mounts support.
1068
1069 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
1070 GenDialog: string formatting and yes/no label fixes.
1071 added WebGLI template for gliserv.py
1072 added WebGLIHandler as well as a definition for it in gliserv.py
1073 updates to the webgli files even though they won't be there for long.
1074 Utility: remove exception for non-existant grppkgs.txt until the new livecd
1075 goes public.
1076
1077 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1078 src/net/server/gliserv.py:
1079 override dict to not be so anal
1080 main server now loads separate module to handle requests
1081 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
1082 split out profile URLs into separate handler function
1083 move handlers into subdirectory
1084 add Welcome and Clients handlers
1085
1086 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1087 src/GLIUtility.py:
1088 raise exception if password prompt received twice
1089
1090 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1091 src/GLIUtility.py:
1092 removed rot13ify()
1093
1094 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1095 src/net/server/gliserv.py:
1096 allow for param to be passed multiple times in GET
1097 no XMLRPC functions return None
1098 modify POST request parsing to only create a list if needed
1099 fix GET request parsing so the list creation for multiple values works
1100 src/net/client/gliclient.py:
1101 various typo and type mismatch fixes
1102 exit after exception
1103
1104 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1105 src/net/client/gliclient.py:
1106 initial commit
1107 pass MAC to XMLRPC functions
1108 src/net/server/GLIServerProfile.py:
1109 rename GLIClientsProfiles to GLIServerProfile
1110
1111 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1112 src/net/server/gliserv.py:
1113 now handles POST requests
1114 move majority of request handling code to common_handler() to reduce code
1115 duplication
1116 profile loading
1117 client reg via XMLRPC goes into SharedInfo()
1118 /showclients redesign
1119 template fixes
1120 allow handler functions to add/change headers
1121 save profile
1122
1123 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1124 src/net/server/GLIClientsProfiles.py:
1125 initial commit
1126 src/net/server/template.html:
1127 initial commit
1128 src/net/server/gliserv.py:
1129 add template mojo
1130
1131 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1132 src/net/server/gliserv.py:
1133 XMLRPC mojo
1134
1135 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1136 src/GLIArchitectureTemplate.py:
1137 add code in _edit_config() to comment line where variable is defined
1138 previously
1139 insert new line under previous definition of variable if it exists
1140 small _edit_config() cleanup
1141 src/GLIStorageDevice.py:
1142 add clear_partitions() function
1143 new sizes for recommended partition layout
1144 automatically calculate swap size for recommended layout
1145
1146 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1147 src/templates/x86ArchitectureTemplate.py:
1148 fat16 mojo
1149
1150 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1151 src/GLIStorageDevice.py:
1152 prevent do_recommended() from being run twice
1153 rewrite do_recommended() to be more robust
1154 src/GLIArchitectureTemplate.py:
1155 rework _edit_config() to not write duplicate entries
1156
1157 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1158 src/GLIStorageDevice.py:
1159 added do_recommended() function to automatically created 256M/1G/* layout
1160
1161 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
1162 src/gli-dialog.py: added set_distcc to the list
1163 GenDialog: added set_distcc. untested.
1164 IP: added install_distcc flag.
1165 AT: added install_distcc function based on the flag. runs after build_kernel
1166 changed AT spawn command for distcc for nodeps.
1167
1168 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1169 src/GLIUtility.py:
1170 add rot13ify() function
1171
1172 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
1173 src/GenDialog.py:
1174 added a sentence of text. unchecking support added.
1175
1176 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
1177 src/GLIUtility.py:
1178 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
1179 src/GenDialog.py:
1180 still working on extra_packages. transformed the list to new format.
1181 added GRP indication to list. untested.
1182 TODO lists updated.
1183 src/fe/dialog/gli-dialog.py:
1184 spelling mistook.
1185
1186 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1187 src/GLIUtility.py:
1188 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
1189
1190 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1191 src/GLIUtility.py:
1192 add get_directory_listing_from_uri()
1193 add http support to above
1194 add ftp support to above
1195 add scp support to above
1196 src/GLIArchitectureTemplate.py:
1197 "0" instead of 0 for key of single-element dict passed to _edit_config()
1198
1199 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
1200 value_only -> only_value
1201
1202 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
1203 gutted out all of etc_portage structure since it is now all handled by
1204 etc_files
1205
1206 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1207 src/GLIArchitectureTemplate.py:
1208 install_packages() sends progress update notifications
1209 src/templates/x86ArchitectureTemplate.py:
1210 increase sleep to 5s between format tries
1211 src/GLIClientController.py:
1212 pass 'self' to AT instead of 'self._pretend'
1213
1214 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
1215 logger -> logger.log in x86AT
1216
1217 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
1218 added set_etc_portage to IP. debugging gli-d's support for it.
1219
1220 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
1221 src/templates/x86ArchitectureTemplate.py:
1222 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
1223
1224 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1225 src/GLIArchitectureTemplate.py:
1226 add _portage_best_version() function and rework install_packages() to allow
1227 for future X of Y tracking
1228 Use best_visible instead of best_version
1229 tracked down and fixed missing = causing empty install extra packages
1230 use = when emerging also
1231 quickpkg hokey pokey
1232 run _get_packages_to_emerge() again with -pk
1233
1234 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
1235 src/ArchTemplate:
1236 removed install_xorg_x11, and put the xorg.conf copying at
1237 the end of install_packages.
1238 added updateglid to /src/misc
1239 updated all core files with new GPL notice and copyright statement.
1240
1241 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1242 src/GLIUtility.py:
1243 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
1244 a snapshot in /mnt/cdrom/snapshots/
1245 get_snapshot_from_cd() adds file:// at the beginning
1246 change calls to extra package special case functions to 'self.blah'
1247
1248 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
1249 src/ArchTemplate: changed "voodoo".
1250 changed order of portage sync methods. made a fallback to webrsync if
1251 normal emerge sync fails.
1252 removed get_sources_from_cd because it is obsolete.
1253 add special cases to install_packages. remove fatal exception on package
1254 install failure b/c the box will still be bootable.
1255 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1256 handled in the FEs.
1257 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1258 awaiting testing.
1259
1260 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1261 src/GLIStorageDevice.py:
1262 global try/except block around fs resizable detection code
1263 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1264 install-failed cleanup function
1265
1266 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1267 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1268
1269 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1270 GLIGenDialog:
1271 add drive choices for loaded configs.
1272 force snapshot for dynamic_stage3
1273 init the snapshoturi input to the cd snapshot if not already selected.
1274 if dynamic_stage3, skip the make.conf step.
1275 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1276 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1277
1278 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1279 src/GLIArchitectureTemplate.py:
1280 manually call MAKEDEV in stage3-dynamic code
1281 copy /etc/inittab.old to /etc/inittab in chroot
1282 src/GLIUtility.py:
1283 add beginning of validate_uri() function
1284 add file:/// support to validate_uri()
1285 single quotes when setting livecd password
1286
1287 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1288 src/GLIGenDialog.py:
1289 change getmountpoint() to get_mountpoint()
1290 src/misc/updategtkfe:
1291 committed script to automatically download latest snapshot and run gtkfe
1292 src/templates/x86ArchitectureTemplate.py:
1293 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1294 src/GLIArchitectureTemplate.py:
1295 give tmp_minor an initial value in mount_local_partitions so that the value
1296 remain from the previous drive
1297
1298 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1299 src/templates/x86ArchitectureTemplate.py:
1300 Fix _configure_lilo() for IP using GLISD stuff
1301 src/GLIArchitectureTemplate.py:
1302 install_cron_daemon() treats "none" specially
1303
1304 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1305 old patch from Steven Mertens to resolve bug #96642
1306 numerous asthetic changes to GenDialog, no real functionality changes though.
1307 strings renamed for global use if necessary.
1308 fix all three parts of bug 102291
1309 disable set_etc_portage until fully-written.
1310
1311 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1312 src/GLIClientController.py:
1313 lower-case http/ftp proxy envvars
1314
1315 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1316 src/GLIClientController.py:
1317 log end of pre_install steps to aid in debugging
1318 src/templates/x86ArchitectureTemplate.py:
1319 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1320
1321 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1322 src/GLIArchitectureTemplate.py:
1323 check to make sure that the device node we're wait for to exist isn't of
1324 type 'free'
1325
1326 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1327 src/GLIGenDialog.py:
1328 convert install_packages to list in set_extra_packages()
1329 check return code of checklist() call in "Manual" section
1330 *actually* fix the first problem
1331
1332 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1333 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1334 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1335
1336 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1337 src/GLIArchitectureTemplate.py:
1338 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1339
8 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1340 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
9 Add CDATA support to SimpleXMLParser and add utility functions for it. 1341 Add CDATA support to SimpleXMLParser and add utility functions for it.
10 1342
11 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> 1343 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
12 src/GLIArchitectureTemplate.py: 1344 src/GLIArchitectureTemplate.py:
13 Fix case where vixie-cron is specified as a full package atom, as we still 1345 Fix case where vixie-cron is specified as a full package atom, as we still
14 don't want to run 'crontab /etc/crontab' for it. 1346 don't want to run 'crontab /etc/crontab' for it.
15 1347
1348*GLI-0.1 (3 Aug 2005)
1349
16 30 Jul 2005; Preston Cody <codeman@gentoo.org> 1350 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
17 add scp to list of is_uri() so GenDialog doesn't complain. 1351 add scp to list of is_uri() so GenDialog doesn't complain.
18 fixed livecd-kernel bug in bootloader code. 1352 fixed livecd-kernel bug in bootloader code.
19 fixed gendialog for dynamic_stage3 instead of "networkless" 1353 fixed gendialog for dynamic_stage3 instead of "networkless"
20 change bootloader to allow for both initrd and initramfs. 1354 change bootloader to allow for both initrd and initramfs.
21 fix IP for dynamic_stage3. 1355 fix IP for dynamic_stage3.
22 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing. 1356 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
23 1357
24 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1358 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
25 Added full scp:// URI support to get_uri() in GLIUtility 1359 Added full scp:// URI support to get_uri() in GLIUtility
26 Remove "networkless" from dynamic stage3 if locic. 1360 Remove "networkless" from dynamic stage3 if locic.
27 Remove print statement from scp:// code. 1361 Remove print statement from scp:// code.
28 Change scp code to check for "assword: " instead of "Password:" 1362 Change scp code to check for "assword: " instead of "Password:"
29 Fix post-install network code to create net.eth1+ symlink correctly 1363 Fix post-install network code to create net.eth1+ symlink correctly
31 Add 2>dev/null to emerge call in _get_packages_to_emerge() 1365 Add 2>dev/null to emerge call in _get_packages_to_emerge()
32 SimpleXMLParser handles True/False/None correctly now 1366 SimpleXMLParser handles True/False/None correctly now
33 Comment out above fix 1367 Comment out above fix
34 Add partitioning wait-for-device-to-exist code to mount_local_partitions 1368 Add partitioning wait-for-device-to-exist code to mount_local_partitions
35 1369
36 28 Jul 2005; Scott Myron <samyron@gentoo.org> 1370 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
37 Removed a FIXME in the GLIClientConfiguration that is no 1371 Removed a FIXME in the GLIClientConfiguration that is no
38 longer needed. 1372 longer needed.
39 1373
40 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1374 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
41 Default to x86 in ClientConfig 1375 Default to x86 in ClientConfig
42 Typo in build-a-stage3 code. 1376 Typo in build-a-stage3 code.
43 Remove MAKEDEV call in build-a-stage3 postscript. 1377 Remove MAKEDEV call in build-a-stage3 postscript.
44 1378
45 26 Jul 2005; Preston Cody <codeman@gentoo.org> 1379 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
46 Rewrote init of IP for gli-d. Other GenDialog updates. 1380 Rewrote init of IP for gli-d. Other GenDialog updates.
47 allow network_type to be None in CConfig. 1381 allow network_type to be None in CConfig.
48 1382
49 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1383 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
50 Add _dynamic_stage3 option to IP. 1384 Add _dynamic_stage3 option to IP.
51 Add check for that option to dynamic stage3 code in ArchTemplate. 1385 Add check for that option to dynamic stage3 code in ArchTemplate.
52 Fix code to determine default route in get_eth_info() in GLIUtility. 1386 Fix code to determine default route in get_eth_info() in GLIUtility.
53 Fix serialization of dns-servers in ClientConfig. 1387 Fix serialization of dns-servers in ClientConfig.
54 1388
55 24 Jul 2005; Preston Cody <codeman@gentoo.org> 1389 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
56 changed default values of cron/logger in IP. 1390 changed default values of cron/logger in IP.
57 moved GenDialog IP init out to the individual files. gli-dialog's version 1391 moved GenDialog IP init out to the individual files. gli-dialog's version
58 will change quite a bit. 1392 will change quite a bit.
59 1393
60 22 Jul 2005; Preston Cody <codeman@gentoo.org> 1394 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
61 added ppcArchTemplate. blank now. working on yaboot. 1395 added ppcArchTemplate. blank now. working on yaboot.
62 modified ArchTemplate for amd64 and ppc custom kernels. 1396 modified ArchTemplate for amd64 and ppc custom kernels.
63 skeleton implementation of _configure_yaboot. 1397 skeleton implementation of _configure_yaboot.
64 small fixes to other templates. 1398 small fixes to other templates.
65 1399
66 21 Jul 2005; Preston Cody <codeman@gentoo.org> 1400 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
67 GenDialog updates. changed comment in IP. 1401 GenDialog updates. changed comment in IP.
68 1402
69 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org> 1403 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
70 src/GLIInstallProfile.py: 1404 src/GLIInstallProfile.py:
71 Fix codeman's screwup of changing the service seperator to ',' in the parser 1405 Fix codeman's screwup of changing the service seperator to ',' in the parser
89 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for 1423 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
90 bootloader works again. Also rename _install_{grub,lilo} to 1424 bootloader works again. Also rename _install_{grub,lilo} to
91 _configure_{grub,lilo} since they don't install the loaders anymore 1425 _configure_{grub,lilo} since they don't install the loaders anymore
92 themselves. 1426 themselves.
93 1427
94 7 Jul 2005; Preston Cody <codeman@gentoo.org> 1428 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
95 fix global USE flags to not include the arch types at the end. 1429 fix global USE flags to not include the arch types at the end.
96 updates to GenDialog and gli-d. 1430 updates to GenDialog and gli-d.
97 1431
98 6 Jul 2005; Preston Cody <codeman@gentoo.org> 1432 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
99 fixing bootloader code for no initrd and initrd->initramfs naming change. 1433 fixing bootloader code for no initrd and initrd->initramfs naming change.
100 1434
101 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1435 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
102 Proper comments and parameters to GLIException in install_mta() 1436 Proper comments and parameters to GLIException in install_mta()
103 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors() 1437 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
104 Add strip() to list_mirrors(), list_subarch_from_mirror() and 1438 Add strip() to list_mirrors(), list_subarch_from_mirror() and
105 list_tarball_from_mirror() to eliminate blank last item. 1439 list_tarball_from_mirror() to eliminate blank last item.
106 1440
107 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1441 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
108 Added stage3 generation code. 1442 Added stage3 generation code.
109 1443
110 5 Jul 2005; Preston Cody <codeman@gentoo.org> 1444 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
111 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge 1445 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
112 Mild changes to GenDialog. 1446 Mild changes to GenDialog.
113 1447
114 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1448 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
115 Remove separate install step configure_rc_conf() since it's handled by 1449 Remove separate install step configure_rc_conf() since it's handled by
116 update_config_files() 1450 update_config_files()
117 Make a copy of newvalues in _edit_config() so quotes aren't added when the 1451 Make a copy of newvalues in _edit_config() so quotes aren't added when the
118 function is called twice on the same file. 1452 function is called twice on the same file.
119 1453
120 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1454 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
121 Missing \ in sed in _get_packages_to_emerge() 1455 Missing \ in sed in _get_packages_to_emerge()
122 Removed explicit emerging of hotplug and no longer add it to the runlevel. 1456 Removed explicit emerging of hotplug and no longer add it to the runlevel.
123 Check in _quickpkg_deps() to ignore blank package names returned from 1457 Check in _quickpkg_deps() to ignore blank package names returned from
124 _get_packages_to_emerge() 1458 _get_packages_to_emerge()
125 1459
126 28 Jun 2005; Preston Cody <codeman@gentoo.org> 1460 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
127 fixed agaffney's missing = and extra : in x86AT. commented out crashing line 1461 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
128 in the dialog.py gauge code. 1462 in the dialog.py gauge code.
129 1463
130 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1464 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
131 Add code to update_config_files() to go through etc_files and update stuff. 1465 Add code to update_config_files() to go through etc_files and update stuff.
132 Check to see that _etc_files['make.conf'] exists in get_make_conf() 1466 Check to see that _etc_files['make.conf'] exists in get_make_conf()
133 Only use float() in partition xml parsing code if type == "free" 1467 Only use float() in partition xml parsing code if type == "free"
134 1468
135 28 Jun 2005; Preston Cody <codeman@gentoo.org> 1469 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
136 finished almost all internationalization of GenDialog. 1470 finished almost all internationalization of GenDialog.
137 attempt at fixing rc.conf function. moved 3 generate functions out of 1471 attempt at fixing rc.conf function. moved 3 generate functions out of
138 fe/gtk/RcDotConf and put them in Utility. fixed self bug. 1472 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
139 added dialog.py to the fe/dialog directory so it actually gets used. 1473 added dialog.py to the fe/dialog directory so it actually gets used.
140 1474
141 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1475 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
142 Roll rc_conf and make_conf into master etc_files structure in InstallProfile. 1476 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
143 1477
144 27 Jun 2005; Preston Cody <codeman@gentoo.org> 1478 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
145 fix extra entry in list_mirrors() 1479 fix extra entry in list_mirrors()
146 beginning internationalization runthrough. 1480 beginning internationalization runthrough.
147 1481
148 26 Jun 2005; Preston Cody <codeman@gentoo.org> 1482 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
149 added dialog.py to /src temporarily until it gets accepted upstream. 1483 added dialog.py to /src temporarily until it gets accepted upstream.
150 fix for unused value in form in dialog.py and changed heights. 1484 fix for unused value in form in dialog.py and changed heights.
151 fix GenDialog forms. 1485 fix GenDialog forms.
152 1486
153 25 Jun 2005; Preston Cody <codeman@gentoo.org> 1487 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
154 Changed hostname/domainname for new baselayout. 1488 Changed hostname/domainname for new baselayout.
155 Changed _add_to_runlevel errors to logs. 1489 Changed _add_to_runlevel errors to logs.
156 Updated TODO list to show status of GenDialog 1490 Updated TODO list to show status of GenDialog
157 More updates to GenDialog including two checklists that probably won't work. 1491 More updates to GenDialog including two checklists that probably won't work.
158 update IP to use comma-separated list instead of space separated for services. 1492 update IP to use comma-separated list instead of space separated for services.
159 1493
160 24 Jun 2005; Preston Cody <codeman@gentoo.org> 1494 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
161 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to 1495 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
162 GenDialog as it gets closer to completion. 1496 GenDialog as it gets closer to completion.
163 1497
164 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1498 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
165 Modify get_eth_info() to take a full interface name (eth0 fex). float() 1499 Modify get_eth_info() to take a full interface name (eth0 fex). float()
166 instead of int() in add_partition_device_partition() for minor (closes 96804) 1500 instead of int() in add_partition_device_partition() for minor (closes 96804)
167 1501
168 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1502 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
169 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"' 1503 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
170 instead of 'interfaces[interface][1]' since DHCP uses that field for its 1504 instead of 'interfaces[interface][1]' since DHCP uses that field for its
171 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net. 1505 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
172 1506
173 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1507 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
174 Apply spawn() patch from #96644 (with minor changes). Make sure the return 1508 Apply spawn() patch from #96644 (with minor changes). Make sure the return
175 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix 1509 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
176 small error with <pipe>.close() returning None. Fix space vs. tab issue. 1510 small error with <pipe>.close() returning None. Fix space vs. tab issue.
177 Fix undefined variable 'output' issue in spawn(). 1511 Fix undefined variable 'output' issue in spawn().
178 1512
179 20 Jun 2005; Preston Cody <codeman@gentoo.org> 1513 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
180 More updates to GenDialog and gli-d. 1514 More updates to GenDialog and gli-d.
181 1515
182 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1516 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
183 Modify list_mirrors() to return a list of mirror URL/name pairs. 1517 Modify list_mirrors() to return a list of mirror URL/name pairs.
184 1518
185 19 Jun 2005; Preston Cody <codeman@gentoo.org> 1519 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
186 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to 1520 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
187 get subarch. 1521 get subarch.
188 1522
189 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1523 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
190 Backend partitioning will create disklabel is none exists. Installprofile 1524 Backend partitioning will create disklabel is none exists. Installprofile
191 defaults to "" now instead of "msdos" for disklabel type. Fix for 1525 defaults to "" now instead of "msdos" for disklabel type. Fix for
192 mount_local_partitions() to remember device along with minor in the 1526 mount_local_partitions() to remember device along with minor in the
193 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and 1527 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
194 add else block to log unsupported netmount types to mount_network_shares() 1528 add else block to log unsupported netmount types to mount_network_shares()
195 1529
196 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1530 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
197 src/GLIArchitectureTemplate.py: 1531 src/GLIArchitectureTemplate.py:
198 Refactor kernel_compile common stuff, fix 2.4 build process. 1532 Refactor kernel_compile common stuff, fix 2.4 build process.
199 src/fe/cli/clife.py: 1533 src/fe/cli/clife.py:
200 Logging system. 1534 Logging system.
201 src/GLIUtility.py, src/GLIStorageDevice.py: 1535 src/GLIUtility.py, src/GLIStorageDevice.py:
202 Add comments about re-writes needed for boxes without sysfs. 1536 Add comments about re-writes needed for boxes without sysfs.
203 1537
204 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1538 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
205 src/GLIArchitectureTemplate.py: 1539 src/GLIArchitectureTemplate.py:
206 2.4 support (pull version data from /usr/src/linux/Makefile), incl. 1540 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
207 'make dep' call for custom compile. build_mode support for prepare-only and 1541 'make dep' call for custom compile. build_mode support for prepare-only and
208 none types completed. custom compile function chains shell functions in 1542 none types completed. custom compile function chains shell functions in
209 spawned script, to allow for catching all errors. 1543 spawned script, to allow for catching all errors.
210 1544
211 15 Jun 2005; Preston Cody <codeman@gentoo.org> 1545 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
212 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe 1546 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
213 and GenDialog. other gendialog updates as well. kernel updates untested. 1547 and GenDialog. other gendialog updates as well. kernel updates untested.
214 1548
215 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1549 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
216 src/GLIInstallProfile.py: 1550 src/GLIInstallProfile.py:
217 Change structure of etc-portage stuff. The serialization was broken before my 1551 Change structure of etc-portage stuff. The serialization was broken before my
218 last commit, and I am the only person that's ever used it. The new schema is 1552 last commit, and I am the only person that's ever used it. The new schema is
219 as follows: 1553 as follows:
220 <etc-portage> 1554 <etc-portage>
231 </entry> 1565 </entry>
232 </file> 1566 </file>
233 </etc-portage> 1567 </etc-portage>
234 1568
235 1569
236 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1570 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
237 src/GLIInstallProfile.py: 1571 src/GLIInstallProfile.py:
238 Add new entry for gli-profile/kernel-build-method item. Add missing 1572 Add new entry for gli-profile/kernel-build-method item. Add missing
239 serialize_etc_portage (temporary). Make serialize_make_conf always print the 1573 serialize_etc_portage (temporary). Make serialize_make_conf always print the
240 keys in the same order. 1574 keys in the same order.
241 1575
242 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1576 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
243 src/GLIArchitectureTemplate.py: 1577 src/GLIArchitectureTemplate.py:
244 Clean up commenting used by _edit_config(), and fix bug where wrong comment 1578 Clean up commenting used by _edit_config(), and fix bug where wrong comment
245 was repeatedly appended to make.conf. 1579 was repeatedly appended to make.conf.
246 1580
247 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1581 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
249 Put some Linux-2.6 specific code under a if statement. Store list of 1583 Put some Linux-2.6 specific code under a if statement. Store list of
250 successfully mounted swap device for using swapoff. Add proper error checking 1584 successfully mounted swap device for using swapoff. Add proper error checking
251 to install_packages and install_filesystem_tools. Fixed namespace conflicts on 1585 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
252 'file'. Clean up some redundant code (thanks to pychecker).' 1586 'file'. Clean up some redundant code (thanks to pychecker).'
253 1587
254 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1588 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
255 Fix typos: get_extended() instead of get_extended_partition(). Added 1589 Fix typos: get_extended() instead of get_extended_partition(). Added
256 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility. 1590 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
257 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync' 1591 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
258 1592
259 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> 1593 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
260 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed 1594 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
261 in add_network_interface. 1595 in add_network_interface.
262 1596
263 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py: 1597 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1598 src/GLIArchitectureTemplate.py:
264 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any 1599 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
265 usage - this caused a failure for stage1/stage2 previously. swapoff for swap 1600 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
266 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during 1601 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
267 prepare_chroot. 1602 prepare_chroot.
268 1603
270 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog, 1605 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
271 +src/fe/installer-gtk: 1606 +src/fe/installer-gtk:
272 Add new automated CLI frontend. Add scripts that are the intended means to 1607 Add new automated CLI frontend. Add scripts that are the intended means to
273 use each frontend. 1608 use each frontend.
274 1609
275 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1610 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
276 src/GLIClientController.py: 1611 src/GLIClientController.py:
277 Add null type to network config, for cases where the interface is already up 1612 Add null type to network config, for cases where the interface is already up
278 and should not be touched (netboot for example). 1613 and should not be touched (netboot for example).
279 1614
280 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1615 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
281 src/GLIArchitectureTemplate.py: 1616 src/GLIArchitectureTemplate.py:
282 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a 1617 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
283 string!. Try to use binary packages if available by default. 1618 string!. Try to use binary packages if available by default.
284 1619
285 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1620 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
286 src/GLIArchitectureTemplate.py: 1621 src/GLIArchitectureTemplate.py:
287 More error checking for _add_to_runlevel, to ensure that the init script 1622 More error checking for _add_to_runlevel, to ensure that the init script
288 actually exists before we try to add it. set_services phase must take place 1623 actually exists before we try to add it. set_services phase must take place
289 after the package installation, otherwise the init scripts might not exist. 1624 after the package installation, otherwise the init scripts might not exist.
290 Find the correct init script for the cron and logging daemons, and add that 1625 Find the correct init script for the cron and logging daemons, and add that
291 instead of the package atom. 1626 instead of the package atom.
292 1627
293 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1628 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
294 src/GLIArchitectureTemplate.py: 1629 src/GLIArchitectureTemplate.py:
295 Fix up _edit_config so that it works if the file doesn't already exist. Fix 1630 Fix up _edit_config so that it works if the file doesn't already exist. Fix
296 usage of 'file' to 'contents' for the variable name, as it shadows 1631 usage of 'file' to 'contents' for the variable name, as it shadows
297 __builtin__.file. 1632 __builtin__.file.
298 1633
299 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1634 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
300 src/GLIArchitectureTemplate.py: 1635 src/GLIArchitectureTemplate.py:
301 Add MTA install code, and include MTA install phase. Ensure 1636 Add MTA install code, and include MTA install phase. Ensure
302 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support 1637 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
303 for 'none' kernel config for build_kernel phase. Put kernel_script in 1638 for 'none' kernel config for build_kernel phase. Put kernel_script in
304 /var/tmp instead of /root for build_kernel phase. 1639 /var/tmp instead of /root for build_kernel phase.
305 1640
306 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py: 1641 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
307 Rename mta variables to match syslog/cron variables. 1642 Rename mta variables to match syslog/cron variables.
308 1643
309 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1644 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
310 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py, 1645 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
311 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore, 1646 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
312 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore, 1647 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
313 src/templates/.cvsignore, src/tests/.cvsignore: 1648 src/templates/.cvsignore, src/tests/.cvsignore:
314 Refactor partition formatting again to include error checking. Allow 'none' 1649 Refactor partition formatting again to include error checking. Allow 'none'
315 for kernel and bootloader specifications. Add .cvsignore files for .py[co]. 1650 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
316 1651
317 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1652 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
318 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py: 1653 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
319 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to 1654 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
320 only have a single spawn call. 1655 only have a single spawn call.
321 1656
322 11 Jun 2005; Preston Cody <codeman@gentoo.org> 1657 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
323 refixed samyron's fix of set_architecture_template. 1658 refixed samyron's fix of set_architecture_template.
324 1659
325 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1660 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
326 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always 1661 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
327 be executable. 1662 be executable.
328 1663
329 10 Jun 2005; Scott Myron <samyron@gentoo.org> 1664 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
330 Fixed one of the FIXME's in the ClientConfiguration. There is now some 1665 Fixed one of the FIXME's in the ClientConfiguration. There is now some
331 error checking when you call set_architecture_template. 1666 error checking when you call set_architecture_template.
332 1667
333 10 Jun 2005; Preston Cody <codeman@gentoo.org> 1668 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
334 moved the mkfsopts input to the partition options menu instead of the during 1669 moved the mkfsopts input to the partition options menu instead of the during
335 the creation process. updated GenDialog to say it supports reiserfs v3. 1670 the creation process. updated GenDialog to say it supports reiserfs v3.
336 1671
337 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py, 1672 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
338 src/GLIStorageDevice.py, fe/dialog/dialogfe.py: 1673 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
339 Complete support for 'mkfsopts' parameter in main system and dialogfe. 1674 Complete support for 'mkfsopts' parameter in main system and dialogfe.
340 Add support for other partition types to dialogfe. 1675 Add support for other partition types to dialogfe.
341 Fix all usages of int(possible_big_number) to long(possible_bit_number) to 1676 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
342 avoid integer overflows and wraparounds. 1677 avoid integer overflows and wraparounds.
343 1678
344 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1679 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
345 Removed start/end from XML output and added mkfsopts to partitioning info. 1680 Removed start/end from XML output and added mkfsopts to partitioning info.
346 'mkfsopts' parameter is now used and support for creating xfs, jfs, and 1681 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
347 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser' 1682 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
348 in GLIClientConfiguration. Change from .1 and .9 to constants for 1683 in GLIClientConfiguration. Change from .1 and .9 to constants for
349 partitioning. Fix free space overwriting bug. Remove a few unused functions 1684 partitioning. Fix free space overwriting bug. Remove a few unused functions
350 from rewrite. Fix call to get_partition_at() 1685 from rewrite. Fix call to get_partition_at()
351 1686
352 8 Jun 2005; Preston Cody <codeman@gentoo.org> 1687 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
353 Updates to GenDialog and dialogfe. 1688 Updates to GenDialog and dialogfe.
354 1689
355 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1690 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
356 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker 1691 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
357 1692
358 6 Jun 2005; Preston Cody <codeman@gentoo.org> 1693 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
359 more GenDialog updates to partitioning. 1694 more GenDialog updates to partitioning.
360 1695
361 5 Jun 2005; Preston Cody <codeman@gentoo.org> 1696 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
362 Indenting issue in GLISD/get_ordered_partition_list. 1697 Indenting issue in GLISD/get_ordered_partition_list.
363 updates to GenDialog partitioning and added default UTC for timezone in IP. 1698 updates to GenDialog partitioning and added default UTC for timezone in IP.
364 1699
365 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1700 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
366 Added GLISD.get_model() 1701 Added GLISD.get_model()
367 1702
368 3 Jun 2005; Preston Cody <codeman@gentoo.org> 1703 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
369 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version. 1704 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
370 More updates to GenDialog :) 1705 More updates to GenDialog :)
371 1706
372 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1707 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
373 Added get_interface_realname() function. 1708 Added get_interface_realname() function.
374 1709
375 2 Jun 2005; Preston Cody <codeman@gentoo.org> 1710 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
376 Added auto-save of CConfig and copying to new /root after install. 1711 Added auto-save of CConfig and copying to new /root after install.
377 yet even more GenDialog updates. 1712 yet even more GenDialog updates.
378 1713
379 1 Jun 2005; Preston Cody <codeman@gentoo.org> 1714 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
380 removed print statement from GLISD. more updates to GenDialog. 1715 removed print statement from GLISD. more updates to GenDialog.
381 1716
382 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1717 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
383 Not being able to fetch the stage tarball is now an exception. Chroot wrapper 1718 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
384 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be 1719 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
385 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few 1720 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
386 places in GLIClientConfiguration. 1721 places in GLIClientConfiguration.
387 1722
388 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1723 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
389 Fix mount_local_partitions(), configure_fstab(), and 1724 Fix mount_local_partitions(), configure_fstab(), and
390 install_filesystem_tools() to use GLISD directly. A few more fixes for same. 1725 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
391 A few more fixes for templates/x86Archtemplate 1726 A few more fixes for templates/x86Archtemplate
392 1727
393 27 May 2005; Preston Cody <codeman@gentoo.org> 1728 27 May 2005; Preston Cody <codeman@gentoo.org> :
394 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still 1729 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
395 a work in progress. 1730 a work in progress.
396 1731
397 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1732 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
398 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD 1733 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
399 directly. GLISD can now handle data imported from XML. 1734 directly. GLISD can now handle data imported from XML.
400 1735
401 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1736 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
402 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to 1737 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
403 handle blank (no disklabel) disks. 1738 handle blank (no disklabel) disks.
404 1739
405 20 May 2005; Preston Cody <codeman@gentoo.org> 1740 20 May 2005; Preston Cody <codeman@gentoo.org> :
406 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned 1741 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
407 up, documented, and separated out serialization and grouped all sections. 1742 up, documented, and separated out serialization and grouped all sections.
408 1743
409 19 May 2005; Preston Cody <codeman@gentoo.org> 1744 19 May 2005; Preston Cody <codeman@gentoo.org> :
410 Reorganization of ClientConfiguration and gutting of unused functions. 1745 Reorganization of ClientConfiguration and gutting of unused functions.
411 Removed verbose option from CC. Moved import statement in IP and CConfig up. 1746 Removed verbose option from CC. Moved import statement in IP and CConfig up.
412 1747
413 18 May 2005; Preston Cody <codeman@gentoo.org> 1748 18 May 2005; Preston Cody <codeman@gentoo.org> :
414 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup 1749 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
415 1750
416 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1751 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
417 Fixed bug in finishing_cleanup(). Fix a late-night coding error in 1752 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
418 partitioning. CC serializes install profile to disk and prepare_chroot() 1753 partitioning. CC serializes install profile to disk and prepare_chroot()
419 copies it into /mnt/gentoo/root 1754 copies it into /mnt/gentoo/root
420 1755
421 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1756 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
422 Moved URI parsing into new function parse_uri() 1757 Moved URI parsing into new function parse_uri()
423 1758
424 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1759 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
425 Added XMLParser module. 1760 Added XMLParser module.
426 1761
427 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1762 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
428 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI. 1763 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
429 Minor fix to is_uri() regex to allow hyphens in hostname. 1764 Minor fix to is_uri() regex to allow hyphens in hostname.
430 1765
431 12 May 2005; Preston Cody <codeman@gentoo.org> 1766 12 May 2005; Preston Cody <codeman@gentoo.org> :
432 Updated finishing_cleanup for new unmounting method from agaffney. 1767 Updated finishing_cleanup for new unmounting method from agaffney.
433 1768
434 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1769 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
435 Fix GLILogger to use correct time format string. Fix _edit_config() to 1770 Fix GLILogger to use correct time format string. Fix _edit_config() to
436 properly comment out variables. Fix minor bug in finishing_cleanup(). Add 1771 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
437 unicode support to is_realstring(). 1772 unicode support to is_realstring().
438 1773
439 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1774 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
440 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero 1775 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
441 return value instead of non-zero. Add code to output a traceback to the 1776 return value instead of non-zero. Add code to output a traceback to the
442 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes 1777 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
443 instead of --nocolor. 1778 instead of --nocolor.
444 1779
445 10 May 2005; Preston Cody <codeman@gentoo.org> 1780 10 May 2005; Preston Cody <codeman@gentoo.org> :
446 Added GLIGenDialog.py to make a generic class for the dialog functions that 1781 Added GLIGenDialog.py to make a generic class for the dialog functions that
447 can be used by both dialogfe and the netfe/be. updated both for new filename. 1782 can be used by both dialogfe and the netfe/be. updated both for new filename.
448 date changes. 2004->2005. 1783 date changes. 2004->2005.
449 1784
450 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1785 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
451 Removed 'quiet=True' from spawn() calls 1786 Removed 'quiet=True' from spawn() calls
452 1787
453 10 May 2005; Preston Cody <codeman@gentoo.org> 1788 10 May 2005; Preston Cody <codeman@gentoo.org> :
454 Updated GLIUtility with patches from chotchki. Also added documentation 1789 Updated GLIUtility with patches from chotchki. Also added documentation
455 1790
456 9 May 2005; Preston Cody <codeman@gentoo.org> 1791 9 May 2005; Preston Cody <codeman@gentoo.org> :
457 Added the function for set_etc_portage to ArchTemplate. no step for it yet. 1792 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
458 Updated _edit_config in ArchTemplate, make_config, and various other fixes 1793 Updated _edit_config in ArchTemplate, make_config, and various other fixes
459 from bug #89683, mostly touchups. 1794 from bug #89683, mostly touchups.
460 1795
461 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1796 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
462 GLIStorageDevice cleanup patch from bug #91761 1797 GLIStorageDevice cleanup patch from bug #91761
463 1798
464 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1799 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
465 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix 1800 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
466 _edit_config(). Error logging casts 'error' to str 1801 _edit_config(). Error logging casts 'error' to str
467 1802
468 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1803 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
469 Exceptions received in CC are logged before being passed to the FE. Added 1804 Exceptions received in CC are logged before being passed to the FE. Added
470 code to CC to handle exceptions *not* thrown by the installer itself. 1805 code to CC to handle exceptions *not* thrown by the installer itself.
471 1806
472 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1807 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
473 get_max_mb_for_resize() returns -1 if not self.resizeable 1808 get_max_mb_for_resize() returns -1 if not self.resizeable
474 1809
475 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1810 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
476 More dirty rsync hacks :-/ 1811 More dirty rsync hacks :-/
477 1812
478 29 Apr 2005; Preston Cody <codeman@gentoo.org> 1813 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
479 Patches from chotchki (bug #90325) to improve CC networking. untested. 1814 Patches from chotchki (bug #90325) to improve CC networking. untested.
480 1815
481 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1816 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
482 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in 1817 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
483 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split 1818 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
484 'custom' sync option into 'none' and 'snapshot'. Minor fixes to 1819 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
485 GLIStorageDevice as suggested by pychecker. Fix minor bug in 1820 GLIStorageDevice as suggested by pychecker. Fix minor bug in
486 _get_packages_to_emerge(). Fix _quickpkg_deps() to call 1821 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
487 _get_packages_to_emerge() 1822 _get_packages_to_emerge()
488 1823
489 28 Apr 2005; Preston Cody <codeman@gentoo.org> 1824 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
490 Added group-adding code to set_users in ArchTemplate 1825 Added group-adding code to set_users in ArchTemplate
491 1826
492 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1827 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
493 Added post-install script code 1828 Added post-install script code
494 1829
495 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1830 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
496 Fixed encapsulation issues in GLIClientController (bug #90141) 1831 Fixed encapsulation issues in GLIClientController (bug #90141)
497 1832
498 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1833 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
499 Update resizing code in GLIStorageDevice 1834 Update resizing code in GLIStorageDevice
500 1835
501 17 Apr 2005; Preston Cody <codeman@gentoo.org> 1836 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
502 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger. 1837 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
503 1838
504 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1839 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
505 Reverted change to ArchTemplate and added support for commented line in old 1840 Reverted change to ArchTemplate and added support for commented line in old
506 code. 1841 code.
507 1842
508 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1843 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
509 Changed _edit_config() to modify value in-place instead of commenting out and 1844 Changed _edit_config() to modify value in-place instead of commenting out and
510 adding the new value to the end of the file. 1845 adding the new value to the end of the file.
511 1846
512 15 Apr 2005; Preston Cody <codeman@gentoo.org> 1847 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
513 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration. 1848 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
514 Also updated TODO list. 1849 Also updated TODO list.
515 1850
516 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1851 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
517 Use blackace's one-liner to add comments for all function for use with 1852 Use blackace's one-liner to add comments for all function for use with
518 pythondoc. 1853 pythondoc.
519 1854
520 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1855 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
521 Moved 'end >= device_sectors' check out of loop to check for next partition's 1856 Moved 'end >= device_sectors' check out of loop to check for next partition's
522 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86. 1857 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
523 Partitioning code now tracks start/end of extended for placing logicals. End 1858 Partitioning code now tracks start/end of extended for placing logicals. End
524 point of logical is now adjusted along with start. 1859 point of logical is now adjusted along with start.
525 1860
526 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1861 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
527 Finish overhaul of backend partitioning code. Fixed all bugs that stood in 1862 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
528 the way of partitioning from a blank disk. Add int() around access to minor 1863 the way of partitioning from a blank disk. Add int() around access to minor
529 key in partition information due to new partition code leaving them as float. 1864 key in partition information due to new partition code leaving them as float.
530 1865
531 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1866 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
532 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code 1867 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
533 1868
534 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1869 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
535 Major GLIStorageDevice overhaul...all MB now instead of sectors. 1870 Major GLIStorageDevice overhaul...all MB now instead of sectors.
536 1871
537 8 Apr 2005; Scott Myron <samyron@gentoo.org> 1872 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
538 Added support for DHCP options and MAC addresses in the InstallProfile. 1873 Added support for DHCP options and MAC addresses in the InstallProfile.
539 1874
540 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1875 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
541 Changed mountopts check to work for blank and whitespace. Pipe emerge through 1876 Changed mountopts check to work for blank and whitespace. Pipe emerge through
542 sed to properly strip out junk. 1877 sed to properly strip out junk.
543 1878
544 2 Apr 2005; Preston Cody <codeman@gentoo.org> 1879 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
545 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel 1880 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
546 added --emptytree to stage2. fixed ethx not being added to runlevel defalt. 1881 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
547 1882
548 31 Mar 2005; Preston Cody <codeman@gentoo.org> 1883 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
549 Fixed indent problem in GLICController 1884 Fixed indent problem in GLICController
550 1885
551 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1886 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
552 Check for disklabel type "loop" and use the device name without a minor. 1887 Check for disklabel type "loop" and use the device name without a minor.
553 1888
554 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1889 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
555 Remove /tmp/compile_output.log and /var/log/install.log when install is 1890 Remove /tmp/compile_output.log and /var/log/install.log when install is
556 complete. Added code to (hopefully) keep 2nd thread running after install. 1891 complete. Added code to (hopefully) keep 2nd thread running after install.
557 Patch from zahna for extra arguments to the kernel. Patch from zahna to add 1892 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
558 get_eth_info() function. Remove most of content in amd64ArchTemplate and 1893 get_eth_info() function. Remove most of content in amd64ArchTemplate and
559 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args 1894 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
560 1895
561 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1896 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
562 Added 'append_log=True' to all spawn() calls using logfile=. Append to log 1897 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
563 when unpacking tarball. 1898 when unpacking tarball.
564 1899
565 28 Mar 2005; Preston Cody <codeman@gentoo.org> 1900 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
566 rewrote filesystem_tools. looks like it works so ripping out all the old 1901 rewrote filesystem_tools. looks like it works so ripping out all the old
567 filesystem_tools code. 1902 filesystem_tools code.
568 1903
569 26 Mar 2005; Preston Cody <codeman@gentoo.org> 1904 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
570 Changed the print statements to logging in the partitioning BE code. 1905 Changed the print statements to logging in the partitioning BE code.
571 the logger may need to be imported to the x86archtemplate. unknown yet. 1906 the logger may need to be imported to the x86archtemplate. unknown yet.
572 Added the finishing_cleanup function. 1907 Added the finishing_cleanup function.
573 added a fix to the logger from BenUrban 1908 added a fix to the logger from BenUrban
574 1909
575 25 Mar 2005; Preston Cody <codeman@gentoo.org> 1910 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
576 changed InstallProfile to remove is_uri check on kernel, stage, and portage 1911 changed InstallProfile to remove is_uri check on kernel, stage, and portage
577 URIs. The blank uri check has been commented out. 1912 URIs. The blank uri check has been commented out.
578 ripped out error checking of set_services. this is done by _add_to_runlevel. 1913 ripped out error checking of set_services. this is done by _add_to_runlevel.
579 1914
580 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1915 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
581 set_stage_tarball_uri() doesn't raise an exception on a blank string. 1916 set_stage_tarball_uri() doesn't raise an exception on a blank string.
582 1917
583 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1918 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
584 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1919 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
585 the install profile if available. Commented out spawn() debugging prints 1920 the install profile if available. Commented out spawn() debugging prints
586 1921
587 23 Mar 2005; Preston Cody <codeman@gentoo.org> 1922 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
588 small changes to setup_network_post. moved adding to runlevel of net.x to 1923 small changes to setup_network_post. moved adding to runlevel of net.x to
589 after the device gets symlinked. added domainname runlevel command. 1924 after the device gets symlinked. added domainname runlevel command.
590 1925
591 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1926 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
592 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in 1927 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
593 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to 1928 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
594 spawn() call in livecd-kernel code to pass environment variables. 1929 spawn() call in livecd-kernel code to pass environment variables.
595 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1930 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
596 the install profile if available. 1931 the install profile if available.
597 1932
598 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1933 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
599 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate 1934 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
600 to handle installing the livecd kernel into the new system. 1935 to handle installing the livecd kernel into the new system.
601 1936
602 22 Mar 2005; Preston Cody <codeman@gentoo.org> 1937 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
603 should emerge hotplug and coldplug before adding them to runlevel. 1938 should emerge hotplug and coldplug before adding them to runlevel.
604 1939
605 21 Mar 2005; Preston Cody <codeman@gentoo.org> 1940 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
606 took chroot out of grub_install command. 1941 took chroot out of grub_install command.
607 1942
608 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1943 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
609 Changed chroot wrapper code in spawn() to write the wrapper the python way 1944 Changed chroot wrapper code in spawn() to write the wrapper the python way
610 instead of the bash way to avoid quote conflicts. Added 1945 instead of the bash way to avoid quote conflicts. Added
611 'logfile=self._compile_logfile' to a number of spawn() calls. Added new 1946 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
612 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh' 1947 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
613 as it breaks the piping. 1948 as it breaks the piping.
614 1949
615 20 Mar 2005; Preston Cody <codeman@gentoo.org> 1950 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
616 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo. 1951 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
617 1952
618 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1953 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
619 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in 1954 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
620 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and 1955 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
621 GLIInstallProfile. 1956 GLIInstallProfile.
622 1957
623 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1958 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
624 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs 1959 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
625 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved 1960 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
626 into /mnt/gentoo in prepare_chroot() 1961 into /mnt/gentoo in prepare_chroot()
627 1962
628 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1963 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
629 Add sigunmask.c contributed by d_m (on freenode) to counteract python's 1964 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
630 retarted behavior regarding threads and signals. Add code to convert MB/%/* 1965 retarted behavior regarding threads and signals. Add code to convert MB/%/*
631 to start/end sectors 1966 to start/end sectors
632 1967
633 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1968 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
634 Add 2>&1 to cmd in spawn() 1969 Add 2>&1 to cmd in spawn()
635 1970
636 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1971 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
637 Modified GLIUtility.exitsuccess() to work with return value from 1972 Modified GLIUtility.exitsuccess() to work with return value from
638 commands.getstatusoutput instead of os.waitpid(). spawn() automatically 1973 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
639 creates wrapper script for commands run inside chroot so multiple commands 1974 creates wrapper script for commands run inside chroot so multiple commands
640 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x' 1975 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
641 for the generated script from spawn() 1976 for the generated script from spawn()
642 1977
643 16 Mar 2005; Preston Cody <codeman@gentoo.org> 1978 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
644 Removed default values for stage tarball URI and portage tree URI from 1979 Removed default values for stage tarball URI and portage tree URI from
645 InstallProfile. These should be set by the FEs. also added services step to 1980 InstallProfile. These should be set by the FEs. also added services step to
646 ArchTemplate and coldplug/hotplug runlevels to the genkernel step. 1981 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
647 Possibly fixed CC DHCP bug with -n. (thx agaffney) 1982 Possibly fixed CC DHCP bug with -n. (thx agaffney)
648 1983
649 14 Mar 2005; Preston Cody <codeman@gentoo.org> 1984 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
650 Small fix for setting the default gateway. Also added feature to dialogfe. 1985 Small fix for setting the default gateway. Also added feature to dialogfe.
651 1986
652 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1987 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
653 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid 1988 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
654 1989
655 1 Mar 2005; Preston Cody <codeman@gentoo.org> 1990 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
656 Fixed a bunch of true -> True typos. lots of em 1991 Fixed a bunch of true -> True typos. lots of em
657 only write new resolv.conf if there are dns servers listed. 1992 only write new resolv.conf if there are dns servers listed.
658 1993
659 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1994 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
660 Commented out 'display_on_tty8=True' in start_portmap() 1995 Commented out 'display_on_tty8=True' in start_portmap()
661 1996
662 18 Feb 2005; Preston Cody <codeman@gentoo.org> 1997 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
663 added progress bar to dialogfe and fix logger bug in ArchTemplate. 1998 added progress bar to dialogfe and fix logger bug in ArchTemplate.
664 1999
665 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 2000 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
666 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved 2001 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
667 lang parameter to __init__() 2002 lang parameter to __init__()
668 2003
669 10 Feb 2005; Preston Cody <codeman@gentoo.org> 2004 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
670 updates to TODO list. 2005 updates to TODO list.
671 2006
672 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 2007 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
673 Initial code for quickpkg GRP support. Fix loop to grab packages from 2008 Initial code for quickpkg GRP support. Fix loop to grab packages from
674 'emerge -p blah' 2009 'emerge -p blah'
675 2010
676 6 Feb 2005; Preston Cody <codeman@gentoo.org> 2011 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
677 check for dhcp in the network stuff and emerge it if it is. 2012 check for dhcp in the network stuff and emerge it if it is.
678 added quickpkg to TODO list 2013 added quickpkg to TODO list
679 2014
680 5 Feb 2005; Preston Cody <codeman@gentoo.org> 2015 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
681 Changed the raising of 'warning' exceptions to a simple log of the error 2016 Changed the raising of 'warning' exceptions to a simple log of the error
682 so that the installer can continue. 2017 so that the installer can continue.
683 2018
684 3 Feb 2005; Preston Cody <codeman@gentoo.org> 2019 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
685 Some big changes. First, changed most output to display_on_tty8. 2020 Some big changes. First, changed most output to display_on_tty8.
686 Second, added log lines to all templates. Some smaller fixes such as typos. 2021 Second, added log lines to all templates. Some smaller fixes such as typos.
687 Also did some cleanups of old commented lines. 2022 Also did some cleanups of old commented lines.
688 2023
689 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 2024 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
690 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban. 2025 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
691 Undo change with fix. Escaping fix in GLIStorageDevice.py 2026 Undo change with fix. Escaping fix in GLIStorageDevice.py
692 2027
693 31 Jan 2005; Preston Cody <codeman@gentoo.org> 2028 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
694 more updates to TODO list. hopefully we'll soon start removing items instead 2029 more updates to TODO list. hopefully we'll soon start removing items instead
695 of adding them. 2030 of adding them.
696 2031
697 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2032 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
698 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works 2033 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
699 2034
700 27 Jan 2005; Preston Cody <codeman@gentoo.org> 2035 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
701 updated TODO list. (again) 2036 updated TODO list. (again)
702 2037
703 25 Jan 2005; Preston Cody <codeman@gentoo.org> 2038 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
704 changed output of portmap start to display_on_tty8. 2039 changed output of portmap start to display_on_tty8.
705 fixed bootloader for udev and multiple kernels 2040 fixed bootloader for udev and multiple kernels
706 fixed custom kernel config (again) 2041 fixed custom kernel config (again)
707 2042
708 22 Jan 2005; Preston Cody <codeman@gentoo.org> 2043 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
709 changed default value of CC._enable_ssh to True because this is smart. 2044 changed default value of CC._enable_ssh to True because this is smart.
710 added code to allow custom kernel .config. may be unstable and break. sorry. 2045 added code to allow custom kernel .config. may be unstable and break. sorry.
711 2046
712 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2047 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
713 partition() now waits until after it checks for partition flags before delete 2048 partition() now waits until after it checks for partition flags before delete
714 the partitions :P 2049 the partitions :P
715 2050
716 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2051 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
717 Updated TODO. swapon failure it temporarily not an error. swapon is an error 2052 Updated TODO. swapon failure it temporarily not an error. swapon is an error
718 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't 2053 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
719 blank. 2054 blank.
720 2055
721 19 Jan 2005; Preston Cody <codeman@gentoo.org> 2056 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
722 Various fixes related to the add_users function. Still not yet finished. 2057 Various fixes related to the add_users function. Still not yet finished.
723 Added things to the TODO list. Lets start using that! 2058 Added things to the TODO list. Lets start using that!
724 2059
725 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2060 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
726 Added code to x86Template to format newly created partitions. Also added 2061 Added code to x86Template to format newly created partitions. Also added
727 some error checking code. GLIStorageDevice passes 'minor' with data to 2062 some error checking code. GLIStorageDevice passes 'minor' with data to
728 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS 2063 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
729 mounting code. 2064 mounting code.
730 2065
731 18 Jan 2005; Preston Cody <codeman@gentoo.org> 2066 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
732 Took out unnecessary setting of random livecd root password. the cd already 2067 Took out unnecessary setting of random livecd root password. the cd already
733 sets it randomly. 2068 sets it randomly.
734 2069
735 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2070 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
736 Took out an unneeded step from CC's run() 2071 Took out an unneeded step from CC's run()
737 2072
738 15 Jan 2005; Preston Cody <codeman@gentoo.org> 2073 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
739 Attempt at detecting and adding windows partitions to lilo. 2074 Attempt at detecting and adding windows partitions to lilo.
740 2075
741 14 Jan 2005; Preston Cody <codeman@gentoo.org> 2076 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
742 Added lilo code and cleaned up lilo code. also do_partitioning renamed to 2077 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
743 partition. fixed misc exit_status => exitstatus typo. 2078 partition. fixed misc exit_status => exitstatus typo.
744 2079
745 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2080 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
746 Added basic code for resizing filesystems with pyparted. Fixed code for 2081 Added basic code for resizing filesystems with pyparted. Fixed code for
747 resizing ntfs and ext2/3. 2082 resizing ntfs and ext2/3.
748 2083
749 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2084 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
750 Fixed partition() in x86Template so that it scans through logicals and deletes 2085 Fixed partition() in x86Template so that it scans through logicals and deletes
751 before deleting containing extended partition. Also clears partition table to 2086 before deleting containing extended partition. Also clears partition table to
752 be safe before third pass. 2087 be safe before third pass.
753 2088
754 08 Jan 2005; Preston Cody <codeman@gentoo.org> 2089 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
755 Added mount_network_shares. not able to test it from this computer. 2090 Added mount_network_shares. not able to test it from this computer.
756 will test when i get back to school. 2091 will test when i get back to school.
757 also added start_portmap to the client_controller as an always-do. 2092 also added start_portmap to the client_controller as an always-do.
758 agaffney says this is needed for NFS mounts to work. 2093 agaffney says this is needed for NFS mounts to work.
759 2094
760 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2095 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
761 Partial rewrite of partitioning code in x86Template. No longer shells out to 2096 Partial rewrite of partitioning code in x86Template. No longer shells out to
762 parted to perform actions, now uses all pyparted calls. Code "works" in a 2097 parted to perform actions, now uses all pyparted calls. Code "works" in a
763 test, but still needs lots of TLC. Also modified tests/install.py to work 2098 test, but still needs lots of TLC. Also modified tests/install.py to work
764 with x86Template and GLIClientConfiguration. 2099 with x86Template and GLIClientConfiguration.
765 2100
766 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2101 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
767 Initial move of partitioning code from ArchTemplate to x86Template. 2102 Initial move of partitioning code from ArchTemplate to x86Template.
768 2103
769 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2104 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
770 Added grp_install and services to InstallProfile. forgot about the set_root_password 2105 Added grp_install and services to InstallProfile. forgot about the set_root_password
771 2106
772 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2107 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
773 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney. 2108 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
774 Test Install ran very well (skipping partitioning). 2109 agaffney. Test Install ran very well (skipping partitioning).
775 2110
776 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2111 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
777 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot 2112 My mid-day update. rewrote mount_local_partitions for order of mounting.
778 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs. 2113 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
779 some may still have eluded me. 2114 partition format. fixed a few _edit_configs. some may still have eluded me.
780 2115
781 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2116 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
782 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it. 2117 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
2118 to test it.
783 Just finished mount_local_partitions in GLIArchitectureTemplate 2119 Just finished mount_local_partitions in GLIArchitectureTemplate
784 2120
785 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2121 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
786 Added get_num_sectors() to GLIStorageDevice. 2122 Added get_num_sectors() to GLIStorageDevice.
787 2123
788 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2124 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
789 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders. 2125 GLIStorageDevice now tracks partition boundaries in sectors instead of
2126 cylinders.
790 Also now ignores <=100 sectors for free space. Removed remaining depends stuff 2127 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
791 from GLIInstallProfile. 2128 from GLIInstallProfile.
792 2129
793 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2130 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
794 GLIStorageDevice returns "unknown" instead of "" for get_type() 2131 GLIStorageDevice returns "unknown" instead of "" for get_type()
795 2132
796 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2133 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
797 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to 2134 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
798 actually work. Commented out resizability checking code for speed. 2135 actually work. Commented out resizability checking code for speed.
799 2136
800 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2137 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
801 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in 2138 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
802 GLIStorageDevice at the suggestion of plors 2139 in GLIStorageDevice at the suggestion of plors
803 2140
804 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2141 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
805 Added a function to GLIUtility to pull a value from a make.conf-style config 2142 Added a function to GLIUtility to pull a value from a make.conf-style config
806 file. Minor type fix to GLIInstallProfile.py 2143 file. Minor type fix to GLIInstallProfile.py
807 2144
808 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2145 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
809 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated 2146 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
810 network mounts from partition data structure in GLIInstallProfile 2147 Separated network mounts from partition data structure in GLIInstallProfile
811 2148
812 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> 2149 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
813 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem 2150 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
814 can be resized. 2151 can be resized.
815 2152
816 27 Oct 2004; Preston Cody <codeman@gentoo.org> 2153 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
817 Added some of the final functions to GLIInstallTemplate. 2154 Added some of the final functions to GLIInstallTemplate.
818 Yes this project is still active despite rare use of the Changelog! 2155 Yes this project is still active despite rare use of the Changelog!
819 2156
820 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2157 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
821 Added the GLIPartitionTools.py file. This is a temporary insertion of 2158 Added the GLIPartitionTools.py file. This is a temporary insertion of
822 partitioning tools that will eventually go into their own package. 2159 partitioning tools that will eventually go into their own package.
823 2160
824 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2161 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
825 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time 2162 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
826 for the program). Added __init__(install_profile, client_configuration) to 2163 run-time for the program). Added __init__(install_profile,
827 GLI.InstallProfile. This sets install_profile and client_configuration once so as 2164 client_configuration) to GLI.InstallProfile. This sets install_profile and
828 to avoid constantly passing stuff every time we call a method. 2165 client_configuration once so as to avoid constantly passing stuff every time
2166 we call a method.
829 2167
830 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2168 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
831 2169
832 Added another private method to GLI.InstallTemplate. _edit_config() modifies config 2170 Added another private method to GLI.InstallTemplate. _edit_config() modifies
833 files without messing up all the other stuff in them. This will be used for making 2171 config files without messing up all the other stuff in them. This will be
834 changes to make.conf, rc.conf, /etc/conf.d/net, etc... 2172 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
835 2173
836 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2174 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
837 2175
838 Added GLI.InstallTemplate framework. This is not yet functional. However, it does 2176 Added GLI.InstallTemplate framework. This is not yet functional. However,
839 have a few basic things. I added two private methods. One is _depends(). This 2177 it does have a few basic things. I added two private methods. One is
840 will be used for dependency checking (ie. unpacking a tarball requires that 2178 _depends(). This will be used for dependency checking (ie. unpacking a
841 partitioning has been done). The other is _exec_in_chroot(). This is the exact 2179 tarball requires that partitioning has been done). The other is
842 same syntax as os.system(), however, instead of being run in the liveCD 2180 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
843 environment, it runs in the chroot. This requires a bit of fork() magic, so I 2181 instead of being run in the liveCD environment, it runs in the chroot. This
844 isolated the code. Hope to work more this week to get this class formed... 2182 requires a bit of fork() magic, so I isolated the code. Hope to work more
2183 this week to get this class formed...
845 2184
846 14 Feb 2004; Eric Sammer <esammer@gentoo.org> 2185 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
847
848 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for 2186 Added SAX parsing. Made GLI.InstallProfile a subclass of
849 obvious reasons. Switched kernel_modules and users to be lists instead of tuples 2187 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
850 to allow for easier modification (mutable, rather than immutable objects). Updated 2188 to be lists instead of tuples to allow for easier modification (mutable,
851 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse(). 2189 rather than immutable objects). Updated existing pydoc and added more.
2190 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
852 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references. 2191 GLI.py a bit. Fixed all accessors to use self references.
853 Added initial unit test code. 2192 Added initial unit test code.
854 2193
855 9 Feb 2004; Eric Sammer <esammer@gentoo.org> 2194 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
856
857 Added initial changelog. Setting up the basic structure of the CVS repository 2195 Added initial changelog. Setting up the basic structure of the CVS repository
858 for the project. Added the UML class diagram in docs. Added a skeletal GLI 2196 for the project. Added the UML class diagram in docs. Added a skeletal GLI
859 python module. Added misc files such news, authors, etc. 2197 python module. Added misc files such news, authors, etc.

Legend:
Removed from v.787  
changed lines
  Added in v.1900

  ViewVC Help
Powered by ViewVC 1.1.20