/[gli]/trunk/ChangeLog
Gentoo

Diff of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 934 Revision 1890
1# ChangeLog for Gentoo Linux Installer 1# ChangeLog for Gentoo Linux Installer
2# Copyright 2005-2005 Gentoo Technologies, Inc. 2# Copyright 2005-2008 Gentoo Foundation; Distributed under the GPL v2
3# $Id: $
3 4
4# $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.400 2005/09/30 20:33:29 agaffney Exp $ 5 05 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
6 src/GLIArchitectureTemplate.py:
7 run sed on copied make.conf to remove lines that start with ##
5 8
6*GLI-0.2 (4 Aug 2005) 9 04 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/Partitioning.py:
10 Modify order of extended check in partitioning code so that it works
7 11
12 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
13 sync dynamic-stage3 code in GLIPortage with GLIArch
14
15 03 Apr 2008; Andrew Gaffney <agaffney@gentoo.org>
16 src/GLIArchitectureTemplate.py:
17 Create /dev/tty1 with dynamic stage3
18
19 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org>
20 src/GLIArchitectureTemplate.py, src/GLIPortage.py,
21 src/fe/dialog/gli-dialog.py:
22 Switch to running vdb_to_fake_binrepo.py instead of reading systempkgs.txt
23 remove all references to systempkgs.txt
24
25 28 Feb 2008; Andrew Gaffney <agaffney@gentoo.org> -src/runtimedeps.py,
26 +src/vdb_to_fake_binrepo.py:
27 Add vdb_to_fake_binrepo.py script from the always awesome zmedico
28
29 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIPortage.py:
30 force livecd and bindist USE
31
32 03 Dec 2007; Andrew Gaffney <agaffney@gentoo.org>
33 src/GLIArchitectureTemplate.py:
34 add in metadata_overlay for faster dep calculation
35
36 26 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
37 src/fe/gtk/ExtraPackages.py:
38 comment out kernelpkgs stuff in gtkfe
39
40 25 Nov 2007; Preston Cody <codeman@gentoo.org>
41 src/fe/dialog/gli-dialog.py:
42 adding commmand-line option for advanced mode which allows full functionality.
43
44 18 Nov 2007; Preston Cody <codeman@gentoo.org>
45 src/fe/dialog/gli-dialog.py:
46 attempting to throw in kernpkgs support. will see how this goes.
47
48 18 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
49 src/fe/gtk/OtherSettings.py:
50 pre-create conf.d/xdm
51
52 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/GLIUtility.py:
53 use proper file name for kernel packages
54
55 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
56 src/fe/gtk/Networking.py:
57 s/install_logger/install_logging_daemon/
58
59 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
60 src/fe/gtk/LocalMounts.py:
61 import GLIUtility
62
63 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org> src/fe/gtk/gtkfe.py:
64 start with Partitioning screen
65
66 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
67 src/fe/gtk/ExtraPackages.py, src/fe/gtk/LocalMounts.py,
68 src/fe/gtk/Networking.py, src/fe/gtk/OtherSettings.py,
69 src/fe/gtk/RootPass.py, src/fe/gtk/Timezone.py, src/fe/gtk/gtkfe.py:
70 rearrange a bit of code for gtkfe networkless-only transition
71
72 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
73 src/GLIUtility:
74 add get_kernpkgs_from_cd() function
75
76 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
77 src/GLIInstallProfile.py:
78 add xdm, gdm, and kdm to package list
79
80 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
81 src/fe/dialog/gli-dialog.py:
82 modify root mountpoint check in gli-dialog to use a for/else and notify the
83 user why they're not being allowed to leave the screen
84
85 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
86 src/templates/x86ArchitectureTemplate.py:
87 move around parentheses to fix bug 179528
88
89 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
90 src/fe/gtk/InstallFailed.py:
91 correct bugzilla location for bug 178144
92
93 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
94 src/GLIArchitectureTemplate.py, src/fe/gtk/gtkfe.py:
95 fix error in debug mode for bug 178475
96 force install_type to networkless for gtkfe
97
98 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
99 src/GLIArchitectureTemplate.py:
100 set TIMEZONE in /etc/conf.d/clock for bug 158882
101
102 17 Nov 2007; Andrew Gaffney <agaffney@gentoo.org>
103 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
104 src/fe/gtk/InstallFailed.py, src/fe/gtk/gtkfe.py:
105 make install log location consistent throughout code
106 'View Log' button in gtkfe now looks for active and failed log
107
108 04 Sep 2007; Chris Gianelloni <wolf31o2@gentoo.org>
109 src/GLIInstallProfile.py:
110 Added x11-themes/gentoo-artwork-livecd to the list of extra packages.
111
112 04 Jan 2007; Preston Cody <codeman@gentoo.org>
113 ClientController:
114 took out the preinstall steps. these will now be handled by the frontends.
115 The actual code for the steps can be put in GLIUtility if necessary.
116 IP:
117 Took out partitioning. Added mounts.
118 Moved root mount point over from CF
119 Removed RP-PPPoE. was never used.
120 AT:
121 reordered functions. removed references to the client-config
122 fixed fstab and other locations that used mountpoints to use the new mounts.
123 removed unused rc.conf function.
124 other smaller touchups.
125 gli-dialog:
126 install_profile() to self._install_profile
127 fix reference to arch instaed of self._arch
128 x86AT:
129 fixed code to use mounts instead of partitioning.
130
131 01 Jan 2007; Preston Cody <codeman@gentoo.org>
132 fixing all instances of WINDOWSKEYS to WINDOWKEYS
133 added space in AT debug line.
134 more general updates in an effort to get the code functional
135
136 29 Oct 2006; Preston Cody <codeman@gentoo.org>
137 gli-dialog:
138 more rearranging of code. Tossed the review menu and not calling show_settings
139 not sure how those are going to turn out just yet.
140
141 22 Oct 2006; Andrew Gaffney <agaffney@gentoo.org>
142 src/Partitioning.py:
143 first round of refactoring for Partitioning.py (was GLISD)
144
145 22 Oct 2006; Preston Cody <codeman@gentoo.org>
146 gli-dialog:
147 added in the rest of the code from GLIGenDialog.
148 will start picking at it now.
149 moved the early questions such as advanced_mode/networkless
150 into functions in the GLIDialog class.
151
152 21 Oct 2006; Preston Cody <codeman@gentoo.org>
153 ClientController and gli-dialog and GLIGenDialog:
154 removing GenDialog, this code will be put into gli-dialog
155 moving some ClientController code into gli-dialog as well.
156 this is only the beginning :)
157
158#------------------------------------------
159# GLI SWITCHES TO SVN.
160
161 15 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
162 src/GLIArchitectureTemplate.py:
163 use _wait_for_device_node() any place we were looping and checking before
164
165 13 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/GLIArchitectureTemplate.py:
167 add _wait_for_device_node()
168 src/GLIPortage.py:
169 raise an exception in get_deps() if pkglist is empty
170 -k option to install livecd-kernel to shut up wolf31o2 :P
171
172 11 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
173 src/GLIArchitectureTemplate.py:
174 break after installing 1 mta in install_mta()
175
176 10 Sep 2006; Preston Cody <codeman@gentoo.org>
177 src/GLIGenDialog.py:
178 rewrote how the USE flags work so that they are written correctly in relation
179 to the system's USE flags.
180 added a while condition on setting a user password
181 src/GLIArchitectureTemplate.py:
182 adding a self._mounted_devices to keep track of mounted partitions.
183 When cleaning up, only unmount these partitions. Not yet tested.
184
185 10 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
186 src/GLIStorageDevice.py:
187 properly identify apple_bootstrap partitions
188
189 9 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
190 src/GLIStorageDevice.py:
191 pay attention to 'ignoredparts' when reading partition table
192
193 3 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
194 src/GLIArchitectureTemplate.py:
195 force conversion of 'mb' to long
196
197 2 Sep 2006; Preston Cody <codeman@gentoo.org>
198 Lots of internationalization fixes. Point to a translation path called
199 languages in the dialog directory. Generated and added .pot files.
200 Added gettext to GLIIP for package descriptions.
201
202 01 Sep 2006; Chris Gianelloni <wolf31o2@gentoo.org>
203 src/GLIInstallProfile.py:
204 Added some more applications to the Extra Packages list.
205
206 1 Sep 2006; Andrew Gaffney <agaffney@gentoo.org>
207 src/templates/ppcArchitectureTemplate.py:
208 this doesn't need to inherit from x86AT or create an infinite loop by calling
209 its own __init__()
210 src/GLIArchitectureTemplate.py,src/templates/x86ArchitectureTemplate.py:
211 move partitioning code to GLIAT
212
213 31 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
214 src/GLIArchitectureTemplate.py:
215 pass quotes_around_value=False when adding default route to conf.d/net
216
217 7 Aug 2006; Andrew Gaffney <agaffney@gentoo.org>
218 src/GLIArchitectureTemplate.py:
219 copy backup custom.conf from livecd if present
220
221*GLI-0.4 (31 Jul 2006)
222
223 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
224 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
225 doing the testing and coming up with the patch.
226
227 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
228 src/GLIArchitectureTemplate.py:
229 skip blank entries/files in update_config_files()
230
231 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
232 src/templates/x86ArchitectureTemplate.py:
233 move logical clipping logic a bit
234
235 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
236 I've commented out most of the code that used launch. It wasn't working and
237 we don't have the time to fix it before the release. I'll look into it after
238 the release and make it more robust and flexible.
239
240 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
241 src/templates/x86ArchitectureTemplate.py:
242 clip logical partition at end of extended
243
244 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
245 src/GLIInstallProfile.py:
246 Added a few more applications to the list of extra packages to be merged,
247 all from various GRP sets.
248
249 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
250 Added launch variable to the end of each try-run with auth, which should
251 cause this to function properly. Of course, more testing is needed.
252
253 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
254 Fix a missed space in the installer script.
255
256 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
257 src/GLIClientConfiguration.py:
258 adding 'None' with capital N so that the frontends can parse the network type
259
260 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
261 src/GLIClientController.py:
262 log version-stamp
263
264 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
265 Updated the installer script to allow specifying the front-end to run from
266 the command line. Currently, it only supports dialog and gtk. It still needs
267 some testing, however.
268
269 9 July 2006; Preston Cody <codeman@gentoo.org>
270 src/GLIGenDialog.py:
271 make lilo only show up for x86 if non-networkless
272
273 25 Jun 2006; Preston Cody <codeman@gentoo.org>
274 src/GLIGenDialog.py:
275 adding code to auto-add doscsi if a scsi drive detected.
276 this code is also in the gtkfe already
277
278 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
279 src/GLIPortage.py:
280 pass proper PORTAGE_TMPDIR
281
282 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
283 src/GLIUtility.py:
284 fix list_mirrors() to ignore <uri> lines that don't end on the same line
285
286 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
287 Added code to the mta step in AT to parse the install packages list and
288 look for mtas and if it finds it emerge it.
289 Initial attempt at moving extra_packages early in the setup to only show
290 local USE flags relating to those packages.
291 .. abandoned local USE project. no right way to do it.
292
293 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
294 src/GLIUtility.py:
295 minor tweak to regex for parsing mirrors.xml
296
297 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
298 src/templates/x86ArchitectureTemplate.py:
299 make use of strict_start and strict_end in partition recreation
300
301 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
302 src/templates/x86ArchitectureTemplate.py:
303 add strict_start and strict_end parameters to _add_partition()
304 add _find_current_minor_for_part() function to help with resizing
305 fix logical/extended logic in _partition_delete_step()
306 in _partition_resize_step(), delete, recreate at new size, resize, delete
307 call resize2fs with no size argument so it fills entire partition
308 more logging
309 only delete, recreate, resize, delete if growing
310 pass new size to resize2fs in K
311
312 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
313 src/GLIStorageDevice.py:
314 call reorder_minors() from tidy_partitions() instead of
315 set_partitions_from_disk()
316 add code to reorder_minors() to take extended/logical into consideration with
317 non-free partitions
318
319 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
320 added a check of the length of the directory in /usr/src if under 6 characters
321 should fix bug 131809
322
323 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
324 src/GLIArchitectureTemplate.py:
325 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
326 and livecd-kernel
327
328 16 Apr 2006; Preston Cody <codeman@gentoo.org>
329 src/GLIGenDialog.py:
330 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
331
332 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
333 src/GLIInstallProfile.py:
334 change kernel-modules to not be so stupid
335
336 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
337 GLIMD: fix display problem with execute.pyhtml.
338 make tables better.
339
340 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
341 src/GLIInstallProfile.py:
342 fix handling of int/float for minor
343 src/templates/x86ArchitectureTemplate.py:
344 save/restore partition name
345 src/GLIStorageDevice.py:
346 support for partition name
347
348 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
349 touchups to add_profile in GLIMD to link to webgli
350 add a save to GLIMD profile button in webgli's saveprofile
351 gliserv.py:
352 initial attempt at custom networking info per client. hostname support only.
353
354 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
355 src/net/server/html/webgli/partitioning[234].pyhtml:
356 small fixes for new partioning code
357
358 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
359 src/GLIClientController.py:
360 record PID of secondary thread
361
362 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
363 src/GLIGenDialog.py:
364 small fix for new partitioning code
365
366 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
367 src/GLIStorageDevice.py:
368 add get_devnode()
369 fix up detect_devices() to detect cciss/ida arrays
370 src/templates/x86ArchitectureTemplate.py:
371 use get_devnode() instead of figuring out the devnode
372 skip first 3 steps if partition layout hasn't changed
373 wipe disk and create new disklabel before recreating partitions
374 src/GLIArchitectureTemplate.py:
375 use get_devnode() in local mount and fstab stuff
376
377 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
378 src/GLIStorageDevice.py:
379 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
380
381 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
382 src/templates/x86ArchitectureTemplate.py:
383 continue breakup/cleanup of partitioning code
384
385 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
386 src/GLIStorageDevice.py:
387 set disklabel to default for arch when clearing the partition table
388 src/templates/x86ArchitectureTemplate.py:
389 complete rewrite of first and second passes
390
391 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
392 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
393 allow iterating over Device object to get partitions
394
395 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
396 src/GLIStorageDevice.py:
397 allow access to Device object like a dict
398
399 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
400 src/GLIStorageDevice.py:
401 allow access to Partition object like a dict
402
403 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
404 src/templates/x86ArchitectureTemplate.py:
405 fail if any filesystems are mounted on the device being partitioned
406
407 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
408 src/GLIStorageDevice.py:
409 reorder minor numbers when loading partitions from disk to match the physical
410 partition order
411
412 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
413 src/GLIStorageDevice.py:
414 overhaul for supporting mac disklabels and partitions out of disk order
415 remove free space from inside extended partition when extended is removed
416
417 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
418 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
419 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
420 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
421 Added bash scripts, icons, and desktop entries from the ebuild to make my
422 life easier.
423
424 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
425 src/GLIStorageDevice.py:
426 raise an exception if the existing partitions are out of disk order
427 look for minors out of order instead of disk position
428
429 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
430 src/fe/dialog/gli-dialog and src/GLIGenDialog:
431 added networkless mode to gli-dialog.
432
433 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
434 src/templates/x86AT:
435 add windows detection code for grub. untested.
436
437 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
438 src/templates/x86ArchitectureTemplate.py:
439 bootloader and partitioning external commands log to compile_output.log
440 wait for device node to exist before resizing
441 add -v to ntfsresize command
442 src/GLIStorageDevice.py:
443 return start/end with ip structure
444 pad min ntfs size by 50 MB just to be safe
445 src/GLIArchitectureTemplate.py:
446 only install filesystem tools for partitions with a mountpoint
447
448 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
449 add error catching and text to saving profile dialogs
450
451 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
452 src/GLIPortage.py:
453 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
454 src/templates/x86ArchitectureTemplate.py:
455 fix checks for changed partitions so they will actually get deleted
456
457 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
458 src/GLIClientController.py:
459 slightly better error handling for pre-install failures
460
461 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
462 src/templates/x86ArchitectureTemplate.py:
463 proper return code checking for ext2/3 resizing
464
465 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
466 src/GLIClientController.py:
467 accept 'none' as well as 'null' for network type
468 src/GLIArchitectureTemplate.py:
469 ignore extended partitions in mount_local_partitions()
470 src/templates/x86ArchitectureTemplate.py:
471 use get_ordered_partition_list() instead of keys().sort() for new_part_list
472 check to make sure start sector for primary isn't less than end sector for
473 previous extended
474 src/GLIClientController.py:
475 write dns servers to /etc/resolv.conf
476
477 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
478 src/GLIPortage.py:
479 copy_pkg_to_chroot() uses compile_output.log for command output
480
481 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
482 only keep a 1000 line 'scrollback' buffer for the compile output and log file
483
484 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
485 src/GLIPortage.py:
486 add code make GLIPortage.py capable of being run stand-along for dynamic
487 stage3 generation and copying packages in a GRP-ish way
488 grp code fixups
489
490 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
491 src/GLIPortage.py:
492 ignore blank packages passed to get_deps() and emerge()
493
494 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
495 src/GLIUtility.py:
496 add get_chosts() function
497
498*GLI-0.3 (12 Feb 2006)
499
500 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
501 src/templates/x86ArchitectureTemplate.py:
502 pull old start/end sector values from somewhere that actually has them
503 add logic for extended partition to code that makes sure new end sector
504 doesn't overlap start sector of next partitions
505 don't freak out if partition can't be deleted
506
507 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
508 src/GLIPortage.py:
509 run env-update at the end of copy_pkg_to_chroot()
510
511 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
512 src/templates/x86ArchitectureTemplate.py:
513 I'm a complete fscking dumbass. I recorded the end sector for partitions that
514 weren't being touched, but I never used it when recreating them...the end was
515 calculated from the size in MB instead :/
516
517 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
518 src/GLIArchitectureTemplate.py:
519 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
520 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
521 src/GLIPortage.py:
522 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
523 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
524 'resized' flag
525
526 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
527 src/GLIPortage.py:
528 short circuit and check vdb directly if package begins with '='
529
530 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
531 added more packages to extra_packages list in IP
532
533 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
534 src/templates/x86ArchitectureTemplate.py:
535 10 tries to create filesystem instead of 3
536 src/GLIPortage, src/GLIArchitectureTemplate.py:
537 ignore_missing flag for copy_pkg_to_chroot()
538
539 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
540 src/GLIPortage.py:
541 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
542
543 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
544 src/net/server/gliserv.py:
545 fix handling of 404 for real files
546 src/net/server/GLIServerProfile.py:
547 look for 'hostname' in attributes instead of 'name'
548
549 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
550 src/SimpleXMLParser.py:
551 initial support for 'include' in XML files
552 src/GLIStorageDevice.py:
553 initial support for %
554 src/GLIClientController.py:
555 add debugging statements to pre-install steps
556
557 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
558 webgli/configfiles:
559 check for key in etc_files['rc.conf'] to fix key error
560 webgli/timezone: small fix.
561 webgli/extrapackages: list-type fix
562 webgli/services: same
563 glimd: add/edit_client updates.
564
565 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
566 added configure.pyhtml to glimd. minor changes
567 to top and add_client. fixed up showargs.
568 added execute.pyhtml
569 changed register clients line in gliserv for name->hostname.
570 updated TODO.
571
572 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
573 src/net/server/*:
574 added add/del/edit client/profile.pythml for glimd.
575 updated templates, showclients, and gliserv.
576
577 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
578 src/net/server/*:
579 stupid threading module...
580
581 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
582 AT: rc.conf -> conf.d/clock
583
584 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
585 src/GLIPortage.py:
586 show 'Calculating dependencies for ...' in subprogress bar at beginning of
587 emerge()
588 src/GLIArchitectureTemplate.py:
589 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
590 in the chroot
591 remove _quickpkg_deps() and _portage_best_{visible,version}()
592 src/GLIUtility.py:
593 fail immediately in validate_uri() if provided URI can't be parsed
594 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
595 debug code in spawn()
596 use lower-level os.read() instead of file.read() because python sucks
597 src/templates/x86ArchitectureTemplate.py:
598 basic subprogress reporting for partitioning
599 total_steps was 1 too high
600
601 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
602 src/GLIUtility.py:
603 move parse_vdb_contents() to GLIPortage
604 src/GLIPortage.py:
605 remove all symlink fixups
606 ignore 'dir' entries in CONTENTS
607 call tar with -p
608
609 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
610 AT: bootsplash is now gensplash
611 gliserv: add advanced_mode to shared_info
612 webgli: Added advanced mode. mostly just disables a few screens.
613
614 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
615 src/GLIPortage.py:
616 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
617 added emerge()
618 update sub-progress after each package is emerged
619 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
620 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
621 remove link if it exists before moving content into place
622 src/GLIArchitectureTemplate.py:
623 install_packages() now calls emerge() in GLIPortage
624 change all calls to self._emerge() to self._portage.emerge()
625 comment out all emerge status checking...using exceptions now
626 call copy_pkg_to_chroot() directly for livecd-kernel
627
628 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
629 src/GLIArchitectureTemplate.py:
630 remove add_pkg_to_world() and copy_pkg_to_chroot()
631 copy installer.log to installer.log.failed on install failure
632 src/GLIUtility.py:
633 added get_keymaps()
634 spawn() takes any False argument for chroot instead of just None
635 src/GLIPortage.py:
636 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
637 change copy_pkg_to_chroot() to work properly with use_root=False
638 figure PORTAGE_TMPDIR properly
639
640 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
641 src/net/server/html/*:
642 converted showclients, load/saveprofile
643
644 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
645 src/GLIPortage.py:
646 exclude packages already in chroot vdb from binary deplist
647 chroot to use best_version for chroot's vdb
648 src/runtimedeps.py:
649 accept ROOT via commandline instead of env
650
651 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
652 src/runtimedeps.py:
653 remove passing of ROOT
654 src/GLIPortage.py:
655 modify get_deps() to get deptree for each package and merge into final list
656 remove depgraph class
657 add debugging code to get_deps()
658 src/GLIArchitectureTemplate.py:
659 combine code for GRP/compile in install_packages() into one block
660 debugging code in install_packages()
661
662 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
663 src/runtimedeps.py:
664 initial commit
665 src/GLIPortage.py:
666 use separate script for GRP deps
667 remove calls to portage module
668
669 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
670 src/GLIPortage.py:
671 initial commit
672 move some of portage function from GLIAT
673 flipped around a few function args
674 src/GLIArchitectureTemplate.py:
675 revamp install_packages() for new GLIPortage
676
677 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
678 src/GLIArchitectureTemplate.py:
679 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
680
681 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
682 src/net/server/gliserv.py:
683 wrap generated code in a class to isolate it a bit better
684 302 redirects work
685 don't use cgi.escape() for <% %>
686 src/net/server/html/webgli/*:
687 load/save profile
688 src/GLIUtility.py:
689 change /sbin/lspci to just lspci
690
691 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
692 src/GLIClientController.py:
693 change ordering of statements in CC run() while loop to not go past the end
694 of the array
695 src/GLIArchitectureTemplate.py:
696 removed redundant bind mounts
697
698 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
699 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
700 added a diagram by blackace from last night.
701 added the glossary in RTF format.
702
703 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
704 x86AT: separated out emerge/configure from running of bootloader
705 added MBR drive support to lilo.
706 these changes will likely not work.
707 AT: added setup_and_run_bootloader step.
708
709 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
710 src/net/server/gliserv.py:
711 call generated code in a function
712 src/net/server/html/webgli/*:
713 include top/bottom
714 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
715 src/GLIClientCongifuration.py:
716 install mode magic
717
718 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
719 src/GLIClientController.py:
720 use GLIException when there's an import problem
721 added debug code to show install_steps
722 src/templates/amd64ArchitectureTemplate.py:
723 add . to import path
724 proper path this time: ../../templates
725 src/GLIArchitectureTemplate.py:
726 add _portage_best_version() function
727
728 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
729 added initial glossary and gimli diagram to the docs directory.
730 modify gli-dialog to allow editing of the install_profile after loading XML.
731
732 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
733 src/net/server/html/webgli/:
734 converted globaluse, localuse, networkmounts, portagetree, and stageselection
735 moved saveclientconfig stuff into clientconfig
736 moved saveconfigfiles into config files
737 converted etc_portage and makedotconf
738 converted bootloader and kernel
739 convert daemons, extrapackages, networking, review, services, timezone, users
740 src/net/server/gliserv.py:
741 proper 404 handling for .pyhtml extension
742 HTML escape <% %> stuff
743 work around python's sucky regexes
744 src/GLIInstallProfile.py:
745 allow set_{rsync,ftp,http}_proxy() to accept empty values
746
747 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
748 src/net/server/gliserv.py:
749 initial commit of Legolas templating engine
750 302 redirects
751 src/net/server/html/index.html, src/net/server/webgli_template.html:
752 minor changes for new code
753 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
754 initial commit of the conversion from the monolithic WebGLIHandler.py to the
755 one file per path Legolas goodness
756 partitioning[2-4] done
757
758 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
759 webgli: dhcp options in CC and post-install.
760 updated comparison chart.
761 webgli: etc/portage/* and distcc support added. not too-well tested.
762
763 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
764 webgli_template.html: valign=top on left side.
765 webgli: fix bootloader boot_device. now working.
766 webgli: CC proxy done. post-install proxy in progress.
767
768 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
769 src/net/server/webgli_template.html:
770 increase padding for content cell to 7px and add colspan=2
771
772 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
773 webgli: added graphic bar on top
774 webgli: added hover effects on the links on the left
775 webgli: re-rendered header_bg.png to stretch without artifacts
776
777 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
778 webgli: make.conf disabling fixes for dynamic_stage3
779 fixed portage snapshot browse popup
780 all changes tested.
781 webgli: add debug mode to CC screen. the screen still needs lots of work.
782
783 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
784 added debug mode question to gli-dialog
785 added CC proxies to CC networking for gli-dialog
786 webgli: fixed skip CC networking if connection active
787 webgli: portage snapshot defaults to CD
788 webgli: bootloader mbr drive selection
789 webgli: USE flags unselectable if dynamic_stage3
790 webgli: manual extra packages and save button.
791
792 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
793 src/GLIUtility.py:
794 change ping count to 2
795 docs/comparison.html
796 initial commit
797
798 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
799 src/templates/x86ArchitectureTemplate.py:
800 fix map() issue with grub code
801 replace kernel_names and initrd_names loops with one-liners
802
803 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
804 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
805 initial gli-dialog support for recommended partitioning layout and clear.
806 failure cleanup now an option for gli-dialog.
807 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
808 added comparison list and updated TODO!
809
810 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
811 src/GLIArchitectureTemplate.py:
812 fix to stage1() debug code
813 fix to stage2() debug code
814
815 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
816 some more bootloader code fixes. forgot boot_device != mbr_device.
817
818 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
819 src/GLIStorageDevice.py:
820 fix to unallocated space merging when last one is after part 4
821
822 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
823 src/GLIArchitectureTemplate.py:
824 small fix to debugging code in copy_pkg_to_chroot()
825
826 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
827 more bugfixes with bootloader code
828 gli-dialog side appears to work
829
830 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
831 initial adding of boot_device to backend.
832 initial boot_device support added to gli-dialog.
833 some fixes of my poor coding
834
835 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
836 converted gli-dialog to use the install_package_list.
837 gtkfe has already been converted by AllanonJL
838 new way working in gli-dialog now and added to webgli.
839 added set/get_boot_device() to IP
840
841 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
842 get_install_package_list added to InstallProfile. This can be used by the FEs
843
844 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
845 src/templates/x86ArchitectureTemplate.py:
846 call ls with '-1 --color=no'
847
848 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
849 added warning (#9) to GRP ppl about stage3 tarballs
850
851 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
852 src/GLIArchitectureTemplate.py:
853 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
854 confused
855
856 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
857 removed protocols from rc.conf screens
858 finished initial rc.conf and make.conf in webgli
859
860 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
861 src/net/server/gliserv.py:
862 add -h option to usage()
863 show time and request URI in debug mode
864 show client IP in debug mode
865 just use IP instead of trying to do a reverse lookup
866
867 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
868 src/net/server/gliserv.py:
869 'classier' 401 message
870 proper commandline parsing
871 help via -h
872 user/pass can be specificed via commandline option
873
874 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
875 src/net/server/gliserv.py:
876 basic HTTP auth
877
878 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
879 src/net/server/gliserv.py:
880 dynamic module reloading (yipee!)
881 send 'Last-Modified' header for real files
882 respond to HEAD with just headers
883 src/net/server/handlers/WebGLIHandler.py:
884 icons for drives
885
886 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
887 src/net/server/handlers/WebGLIHandler.py:
888 initial 'pretty' partition table display support
889 clicking partition in 'pretty' display works instead of radio buttons
890 radio buttons and pretty display work together
891 META redirect instead of javascript
892 pretty display stretches across entire screen
893 'Recommended layout' and 'Clear drive' functions
894 properly catch exceptions from do_recommended()
895 src/GLIArchitectureTemplate.py:
896 replace preinst, copy, postinst, rm steps with qmerge
897 whoops...that shouldn't have been commented out
898 create image_dir with -p in copy_pkg_to_chroot()
899 more generic of symlink crappiness
900 new copy_pkg_to_chroot() actually works now
901
902 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
903 src/GLIStorageDevice.py:
904 initial generic disk support
905 fixes for add_partition() code
906 src/net/server/handlers/WebGLIHandler.py:
907 added support for creating generic disks
908 add new partition working
909 save and delete partitions
910
911 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
912 webgli: Partitioning making progress.
913
914 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
915 src/GLIArchitectureTemplate.py:
916 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
917 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
918 dir) and works around /etc/gconf symlink problem
919
920 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
921 webgli: lots of updates. preliminary partitioning. extra packages works.
922
923 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
924 src/net/server/gliserv.py:
925 httpd now supports HTTPS and falls back to HTTP if not available
926 make fallback actually work
927 src/net/server/SecureXMLRPCServer.py:
928 SecureSocketServer is now threaded
929
930 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
931 src/net/client/gliclient.py:
932 try to use HTTPS for XMLRPC first and fallback to HTTP
933 pretend mode
934 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
935 HTTPS XMLRPC goodness from samyron
936 pass name of certificate
937
938 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
939 wegli: daemons and services screens done.
940
941 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
942 webgli: networking and users screens
943 added return_redirect to handler.py
944 loading and saving install/client profiles works for webgli now
945 Review also done
946
947*GLI-0.2 (27 Oct 2005)
948
949 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
950 src/templates/x86ArchitectureTemplate.py:
951 properly check for bootloader emerge exist status with exitsuccess()
952 log output of grub install command
953 add --batch --no-floppy to grub command
954 grubinstallstring only gets logged if debug is on
955 src/GLIUtility.py:
956 update progress bar to 100% when process finishes
957
958 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
959 src/GLIClientController.py:
960 added debugging code for the interaction between the 2 threads via Event()
961 src/GLIUtility.py:
962 doubled the buffer size in spawn()
963 bump buffer size up to 16384
964 only report progress in 5% increments
965 src/GLIArchitectureTemplate.py:
966 kernelpkgs.txt support code
967 above disabled because it sucks
968 added add_pkg_to_world()
969
970 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
971 src/GLIArchitectureTemplate.py:
972 use tar | tar to copy files in copy_pkg_to_chroot()
973 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
974
975 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
976 DEBUGGING ADDED TO AT. verbose field added to CConfig.
977
978 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
979 src/net/server/gliserv.py:
980 / maps to index.html
981 look for actual files in html/
982 src/net/html:
983 new template
984 src/GLIUtility.py:
985 added parse_vdb_contents()
986 src/GLIArchitectureTemplate.py:
987 added copy_pkg_to_chroot()
988 added debug code to dynamic-stage3
989 switch dynamic-stage3 to new method
990 lots of bug fixes from adding debug code
991
992 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
993 webgli initial bootloader support + changed make.conf.
994 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
995
996 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
997 src/GLIUtility.py:
998 horrible tangled mess of code that is tarball unpacking subprogress display
999 add unpack progress to portage snapshot
1000 use read() instead of readlines() in spawn()
1001 only update progress bar for whole percents
1002
1003 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1004 src/templates/x86ArchitectureTemplate.py:
1005 change call to 'grub' to use GLIUtility.exitsuccess()
1006 add definition of 'build_mode' in _configure_lilo()
1007 src/misc/updategtkfe, src/misc/updateglid:
1008 fix so subshell is called in root shell
1009
1010 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1011 src/net/server/handlers/WebGLIHandler.py:
1012 stage screen launches URI browser in sized window with various properties set
1013
1014 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1015 src/misc/updategtkfe:
1016 updated to actually work
1017 remove previous snapshot and extracted dir before downloading
1018 src/misc/updateglid:
1019 updated to actually work
1020 src/templates/x86ArchitectureTemplate.py:
1021 fixed bug where grub code was looking for 'root+root+file_name2'
1022
1023 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1024 src/net/server/handlers/WebGLIHandler.py:
1025 URI browser
1026 added mirror selection
1027 src/GLIUtility.py:
1028 ls via ssh strips off ending *
1029
1030 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
1031 more updates to webgli. stage selection.
1032
1033 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
1034 updated webgli with preliminary Network Mounts support.
1035
1036 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
1037 GenDialog: string formatting and yes/no label fixes.
1038 added WebGLI template for gliserv.py
1039 added WebGLIHandler as well as a definition for it in gliserv.py
1040 updates to the webgli files even though they won't be there for long.
1041 Utility: remove exception for non-existant grppkgs.txt until the new livecd
1042 goes public.
1043
1044 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1045 src/net/server/gliserv.py:
1046 override dict to not be so anal
1047 main server now loads separate module to handle requests
1048 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
1049 split out profile URLs into separate handler function
1050 move handlers into subdirectory
1051 add Welcome and Clients handlers
1052
1053 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1054 src/GLIUtility.py:
1055 raise exception if password prompt received twice
1056
1057 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1058 src/GLIUtility.py:
1059 removed rot13ify()
1060
1061 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
1062 src/net/server/gliserv.py:
1063 allow for param to be passed multiple times in GET
1064 no XMLRPC functions return None
1065 modify POST request parsing to only create a list if needed
1066 fix GET request parsing so the list creation for multiple values works
1067 src/net/client/gliclient.py:
1068 various typo and type mismatch fixes
1069 exit after exception
1070
8 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1071 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
9 src/net/client/gliclient.py: 1072 src/net/client/gliclient.py:
10 initial commit 1073 initial commit
11 pass MAC to XMLRPC functions 1074 pass MAC to XMLRPC functions
12 src/net/server/GLIServerProfile.py: 1075 src/net/server/GLIServerProfile.py:
13 rename GLIClientsProfiles to GLIServerProfile 1076 rename GLIClientsProfiles to GLIServerProfile
14 1077
15 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1078 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
16 src/net/server/gliserv.py: 1079 src/net/server/gliserv.py:
17 now handles POST requests 1080 now handles POST requests
18 move majority of request handling code to common_handler() to reduce code 1081 move majority of request handling code to common_handler() to reduce code
19 duplication 1082 duplication
20 profile loading 1083 profile loading
22 /showclients redesign 1085 /showclients redesign
23 template fixes 1086 template fixes
24 allow handler functions to add/change headers 1087 allow handler functions to add/change headers
25 save profile 1088 save profile
26 1089
27 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1090 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
28 src/net/server/GLIClientsProfiles.py: 1091 src/net/server/GLIClientsProfiles.py:
29 initial commit 1092 initial commit
30 src/net/server/template.html: 1093 src/net/server/template.html:
31 initial commit 1094 initial commit
32 src/net/server/gliserv.py: 1095 src/net/server/gliserv.py:
33 add template mojo 1096 add template mojo
34 1097
35 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1098 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
36 src/net/server/gliserv.py: 1099 src/net/server/gliserv.py:
37 XMLRPC mojo 1100 XMLRPC mojo
38 1101
39 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1102 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
40 src/GLIArchitectureTemplate.py: 1103 src/GLIArchitectureTemplate.py:
41 add code in _edit_config() to comment line where variable is defined 1104 add code in _edit_config() to comment line where variable is defined
42 previously 1105 previously
43 insert new line under previous definition of variable if it exists 1106 insert new line under previous definition of variable if it exists
44 small _edit_config() cleanup 1107 small _edit_config() cleanup
45 src/GLIStorageDevice.py: 1108 src/GLIStorageDevice.py:
46 add clear_partitions() function 1109 add clear_partitions() function
47 new sizes for recommended partition layout 1110 new sizes for recommended partition layout
48 automatically calculate swap size for recommended layout 1111 automatically calculate swap size for recommended layout
49 1112
50 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1113 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
51 src/templates/x86ArchitectureTemplate.py: 1114 src/templates/x86ArchitectureTemplate.py:
52 fat16 mojo 1115 fat16 mojo
53 1116
54 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1117 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
55 src/GLIStorageDevice.py: 1118 src/GLIStorageDevice.py:
56 prevent do_recommended() from being run twice 1119 prevent do_recommended() from being run twice
57 rewrite do_recommended() to be more robust 1120 rewrite do_recommended() to be more robust
58 src/GLIArchitectureTemplate.py: 1121 src/GLIArchitectureTemplate.py:
59 rework _edit_config() to not write duplicate entries 1122 rework _edit_config() to not write duplicate entries
60 1123
61 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1124 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
62 src/GLIStorageDevice.py: 1125 src/GLIStorageDevice.py:
63 added do_recommended() function to automatically created 256M/1G/* layout 1126 added do_recommended() function to automatically created 256M/1G/* layout
64 1127
65 17 Sep 2005; Preston Cody <codeman@gentoo.org> 1128 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
66 src/gli-dialog.py: added set_distcc to the list 1129 src/gli-dialog.py: added set_distcc to the list
67 GenDialog: added set_distcc. untested. 1130 GenDialog: added set_distcc. untested.
68 IP: added install_distcc flag. 1131 IP: added install_distcc flag.
69 AT: added install_distcc function based on the flag. runs after build_kernel 1132 AT: added install_distcc function based on the flag. runs after build_kernel
70 changed AT spawn command for distcc for nodeps. 1133 changed AT spawn command for distcc for nodeps.
71 1134
72 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1135 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
73 src/GLIUtility.py: 1136 src/GLIUtility.py:
74 add rot13ify() function 1137 add rot13ify() function
75 1138
76 16 Sep 2005; Preston Cody <codeman@gentoo.org> 1139 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
77 src/GenDialog.py 1140 src/GenDialog.py:
78 added a sentence of text. unchecking support added. 1141 added a sentence of text. unchecking support added.
79 1142
80 15 Sep 2005; Preston Cody <codeman@gentoo.org> 1143 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
81 src/GLIUtility.py 1144 src/GLIUtility.py:
82 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus 1145 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
83 src/GenDialog.py 1146 src/GenDialog.py:
84 still working on extra_packages. transformed the list to new format. 1147 still working on extra_packages. transformed the list to new format.
85 added GRP indication to list. untested. 1148 added GRP indication to list. untested.
86 TODO lists updated. 1149 TODO lists updated.
87 src/fe/dialog/gli-dialog.py 1150 src/fe/dialog/gli-dialog.py:
88 spelling mistook. 1151 spelling mistook.
89 1152
90 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1153 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
91 src/GLIUtility.py: 1154 src/GLIUtility.py:
92 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found 1155 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
93 1156
94 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1157 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
95 src/GLIUtility.py: 1158 src/GLIUtility.py:
96 add get_directory_listing_from_uri() 1159 add get_directory_listing_from_uri()
97 add http support to above 1160 add http support to above
98 add ftp support to above 1161 add ftp support to above
99 add scp support to above 1162 add scp support to above
100 src/GLIArchitectureTemplate.py: 1163 src/GLIArchitectureTemplate.py:
101 "0" instead of 0 for key of single-element dict passed to _edit_config() 1164 "0" instead of 0 for key of single-element dict passed to _edit_config()
102 1165
103 5 Sep 2005; Preston Cody <codeman@gentoo.org> 1166 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
104 value_only -> only_value 1167 value_only -> only_value
105 1168
106 3 Sep 2005; Preston Cody <codeman@gentoo.org> 1169 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
107 gutted out all of etc_portage structure since it is now all handled by 1170 gutted out all of etc_portage structure since it is now all handled by
108 etc_files 1171 etc_files
109 1172
110 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1173 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
111 src/GLIArchitectureTemplate.py: 1174 src/GLIArchitectureTemplate.py:
112 install_packages() sends progress update notifications 1175 install_packages() sends progress update notifications
113 src/templates/x86ArchitectureTemplate.py: 1176 src/templates/x86ArchitectureTemplate.py:
114 increase sleep to 5s between format tries 1177 increase sleep to 5s between format tries
115 src/GLIClientController.py: 1178 src/GLIClientController.py:
116 pass 'self' to AT instead of 'self._pretend' 1179 pass 'self' to AT instead of 'self._pretend'
117 1180
118 2 Sep 2005; Preston Cody <codeman@gentoo.org> 1181 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
119 logger -> logger.log in x86AT 1182 logger -> logger.log in x86AT
120 1183
121 1 Sep 2005; Preston Cody <codeman@gentoo.org> 1184 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
122 added set_etc_portage to IP. debugging gli-d's support for it. 1185 added set_etc_portage to IP. debugging gli-d's support for it.
123 1186
124 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> 1187 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
125 src/templates/x86ArchitectureTemplate.py: 1188 src/templates/x86ArchitectureTemplate.py:
126 switch to 3 tries for mkfs instead of looping waiting for dev node to exist 1189 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
127 1190
128 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1191 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
129 src/GLIArchitectureTemplate.py: 1192 src/GLIArchitectureTemplate.py:
130 add _portage_best_version() function and rework install_packages() to allow 1193 add _portage_best_version() function and rework install_packages() to allow
131 for future X of Y tracking 1194 for future X of Y tracking
132 Use best_visible instead of best_version 1195 Use best_visible instead of best_version
133 tracked down and fixed missing = causing empty install extra packages 1196 tracked down and fixed missing = causing empty install extra packages
134 use = when emerging also 1197 use = when emerging also
135 quickpkg hokey pokey 1198 quickpkg hokey pokey
136 run _get_packages_to_emerge() again with -pk 1199 run _get_packages_to_emerge() again with -pk
137 1200
138 22 Aug 2005; Preston Cody <codeman@gentoo.org> 1201 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
1202 src/ArchTemplate:
139 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at 1203 removed install_xorg_x11, and put the xorg.conf copying at
140 the end of install_packages. 1204 the end of install_packages.
141 added updateglid to /src/misc 1205 added updateglid to /src/misc
142 updated all core files with new GPL notice and copyright statement. 1206 updated all core files with new GPL notice and copyright statement.
143 1207
144 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1208 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
145 src/GLIUtility.py: 1209 src/GLIUtility.py:
146 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find 1210 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
147 a snapshot in /mnt/cdrom/snapshots/ 1211 a snapshot in /mnt/cdrom/snapshots/
148 get_snapshot_from_cd() adds file:// at the beginning 1212 get_snapshot_from_cd() adds file:// at the beginning
149 change calls to extra package special case functions to 'self.blah' 1213 change calls to extra package special case functions to 'self.blah'
150 1214
151 21 Aug 2005; Preston Cody <codeman@gentoo.org> 1215 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
152 src/ArchTemplate: changed "voodoo". 1216 src/ArchTemplate: changed "voodoo".
153 changed order of portage sync methods. made a fallback to webrsync if 1217 changed order of portage sync methods. made a fallback to webrsync if
154 normal emerge sync fails. 1218 normal emerge sync fails.
155 removed get_sources_from_cd because it is obsolete. 1219 removed get_sources_from_cd because it is obsolete.
156 add special cases to install_packages. remove fatal exception on package 1220 add special cases to install_packages. remove fatal exception on package
158 add install_xorg_x11. remove adding of xdm to runlevel. this will now be 1222 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
159 handled in the FEs. 1223 handled in the FEs.
160 src/GenDialog: added a bunch of code for dealing with x11-based packages. 1224 src/GenDialog: added a bunch of code for dealing with x11-based packages.
161 awaiting testing. 1225 awaiting testing.
162 1226
163 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1227 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
164 src/GLIStorageDevice.py: 1228 src/GLIStorageDevice.py:
165 global try/except block around fs resizable detection code 1229 global try/except block around fs resizable detection code
166 src/GLIArchitectureTemplate.py, src/GLIClientController.py: 1230 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
167 install-failed cleanup function 1231 install-failed cleanup function
168 1232
169 18 Aug 2005; Preston Cody <codeman@gentoo.org> 1233 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
170 x86ArchTemplate: updated lilo code. separated out THREE commands. untested. 1234 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
171 1235
172 16 Aug 2005; Preston Cody <codeman@gentoo.org> 1236 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
173 GLIGenDialog: 1237 GLIGenDialog:
174 add drive choices for loaded configs. 1238 add drive choices for loaded configs.
175 force snapshot for dynamic_stage3 1239 force snapshot for dynamic_stage3
176 init the snapshoturi input to the cd snapshot if not already selected. 1240 init the snapshoturi input to the cd snapshot if not already selected.
177 if dynamic_stage3, skip the make.conf step. 1241 if dynamic_stage3, skip the make.conf step.
178 GLIUtility: add get_cd_snapshot_uri() for local snapshots. 1242 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
179 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog 1243 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
180 1244
181 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1245 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
182 src/GLIArchitectureTemplate.py: 1246 src/GLIArchitectureTemplate.py:
183 manually call MAKEDEV in stage3-dynamic code 1247 manually call MAKEDEV in stage3-dynamic code
184 copy /etc/inittab.old to /etc/inittab in chroot 1248 copy /etc/inittab.old to /etc/inittab in chroot
185 src/GLIUtility.py: 1249 src/GLIUtility.py:
186 add beginning of validate_uri() function 1250 add beginning of validate_uri() function
187 add file:/// support to validate_uri() 1251 add file:/// support to validate_uri()
188 single quotes when setting livecd password 1252 single quotes when setting livecd password
189 1253
190 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1254 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
191 src/GLIGenDialog.py: 1255 src/GLIGenDialog.py:
192 change getmountpoint() to get_mountpoint() 1256 change getmountpoint() to get_mountpoint()
193 src/misc/updategtkfe: 1257 src/misc/updategtkfe:
194 committed script to automatically download latest snapshot and run gtkfe 1258 committed script to automatically download latest snapshot and run gtkfe
195 src/templates/x86ArchitectureTemplate.py: 1259 src/templates/x86ArchitectureTemplate.py:
196 fix _configure_lilo_add_windows() for IP -> GLISD stuff 1260 fix _configure_lilo_add_windows() for IP -> GLISD stuff
197 src/GLIArchitectureTemplate.py: 1261 src/GLIArchitectureTemplate.py:
198 give tmp_minor an initial value in mount_local_partitions so that the value 1262 give tmp_minor an initial value in mount_local_partitions so that the value
199 remain from the previous drive 1263 remain from the previous drive
200 1264
201 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1265 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
202 src/templates/x86ArchitectureTemplate.py: 1266 src/templates/x86ArchitectureTemplate.py:
203 Fix _configure_lilo() for IP using GLISD stuff 1267 Fix _configure_lilo() for IP using GLISD stuff
204 src/GLIArchitectureTemplate.py: 1268 src/GLIArchitectureTemplate.py:
205 install_cron_daemon() treats "none" specially 1269 install_cron_daemon() treats "none" specially
206 1270
207 14 Aug 2005; Preston Cody <codeman@gentoo.org> 1271 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
208 old patch from Steven Mertens to resolve bug #96642 1272 old patch from Steven Mertens to resolve bug #96642
209 numerous asthetic changes to GenDialog, no real functionality changes though. 1273 numerous asthetic changes to GenDialog, no real functionality changes though.
210 strings renamed for global use if necessary. 1274 strings renamed for global use if necessary.
211 fix all three parts of bug 102291 1275 fix all three parts of bug 102291
212 disable set_etc_portage until fully-written. 1276 disable set_etc_portage until fully-written.
213 1277
214 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1278 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
215 src/GLIClientController.py: 1279 src/GLIClientController.py:
216 lower-case http/ftp proxy envvars 1280 lower-case http/ftp proxy envvars
217 1281
218 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1282 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
219 src/GLIClientController.py: 1283 src/GLIClientController.py:
220 log end of pre_install steps to aid in debugging 1284 log end of pre_install steps to aid in debugging
221 src/templates/x86ArchitectureTemplate.py: 1285 src/templates/x86ArchitectureTemplate.py:
222 change set_flag(flag) to set_flag(flag, True)...*stab* *stab* 1286 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
223 1287
224 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1288 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
225 src/GLIArchitectureTemplate.py 1289 src/GLIArchitectureTemplate.py:
226 check to make sure that the device node we're wait for to exist isn't of 1290 check to make sure that the device node we're wait for to exist isn't of
227 type 'free' 1291 type 'free'
228 1292
229 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1293 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
230 src/GLIGenDialog.py: 1294 src/GLIGenDialog.py:
231 convert install_packages to list in set_extra_packages() 1295 convert install_packages to list in set_extra_packages()
232 check return code of checklist() call in "Manual" section 1296 check return code of checklist() call in "Manual" section
233 *actually* fix the first problem 1297 *actually* fix the first problem
234 1298
235 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py: 1299 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
236 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash 1300 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
237 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT). 1301 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
238 1302
239 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1303 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
240 src/GLIArchitectureTemplate.py: 1304 src/GLIArchitectureTemplate.py:
241 re-fix net.eth1+ symlink code...wtf is wrong with cvs? 1305 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
242 1306
243 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> 1307 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
244 Add CDATA support to SimpleXMLParser and add utility functions for it. 1308 Add CDATA support to SimpleXMLParser and add utility functions for it.
245 1309
246 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> 1310 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
247 src/GLIArchitectureTemplate.py: 1311 src/GLIArchitectureTemplate.py:
248 Fix case where vixie-cron is specified as a full package atom, as we still 1312 Fix case where vixie-cron is specified as a full package atom, as we still
249 don't want to run 'crontab /etc/crontab' for it. 1313 don't want to run 'crontab /etc/crontab' for it.
250 1314
251*GLI-0.1 (3 Aug 2005) 1315*GLI-0.1 (3 Aug 2005)
252 1316
253 30 Jul 2005; Preston Cody <codeman@gentoo.org> 1317 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
254 add scp to list of is_uri() so GenDialog doesn't complain. 1318 add scp to list of is_uri() so GenDialog doesn't complain.
255 fixed livecd-kernel bug in bootloader code. 1319 fixed livecd-kernel bug in bootloader code.
256 fixed gendialog for dynamic_stage3 instead of "networkless" 1320 fixed gendialog for dynamic_stage3 instead of "networkless"
257 change bootloader to allow for both initrd and initramfs. 1321 change bootloader to allow for both initrd and initramfs.
258 fix IP for dynamic_stage3. 1322 fix IP for dynamic_stage3.
259 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing. 1323 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
260 1324
261 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1325 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
262 Added full scp:// URI support to get_uri() in GLIUtility 1326 Added full scp:// URI support to get_uri() in GLIUtility
263 Remove "networkless" from dynamic stage3 if locic. 1327 Remove "networkless" from dynamic stage3 if locic.
264 Remove print statement from scp:// code. 1328 Remove print statement from scp:// code.
265 Change scp code to check for "assword: " instead of "Password:" 1329 Change scp code to check for "assword: " instead of "Password:"
266 Fix post-install network code to create net.eth1+ symlink correctly 1330 Fix post-install network code to create net.eth1+ symlink correctly
268 Add 2>dev/null to emerge call in _get_packages_to_emerge() 1332 Add 2>dev/null to emerge call in _get_packages_to_emerge()
269 SimpleXMLParser handles True/False/None correctly now 1333 SimpleXMLParser handles True/False/None correctly now
270 Comment out above fix 1334 Comment out above fix
271 Add partitioning wait-for-device-to-exist code to mount_local_partitions 1335 Add partitioning wait-for-device-to-exist code to mount_local_partitions
272 1336
273 28 Jul 2005; Scott Myron <samyron@gentoo.org> 1337 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
274 Removed a FIXME in the GLIClientConfiguration that is no 1338 Removed a FIXME in the GLIClientConfiguration that is no
275 longer needed. 1339 longer needed.
276 1340
277 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1341 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
278 Default to x86 in ClientConfig 1342 Default to x86 in ClientConfig
279 Typo in build-a-stage3 code. 1343 Typo in build-a-stage3 code.
280 Remove MAKEDEV call in build-a-stage3 postscript. 1344 Remove MAKEDEV call in build-a-stage3 postscript.
281 1345
282 26 Jul 2005; Preston Cody <codeman@gentoo.org> 1346 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
283 Rewrote init of IP for gli-d. Other GenDialog updates. 1347 Rewrote init of IP for gli-d. Other GenDialog updates.
284 allow network_type to be None in CConfig. 1348 allow network_type to be None in CConfig.
285 1349
286 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1350 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
287 Add _dynamic_stage3 option to IP. 1351 Add _dynamic_stage3 option to IP.
288 Add check for that option to dynamic stage3 code in ArchTemplate. 1352 Add check for that option to dynamic stage3 code in ArchTemplate.
289 Fix code to determine default route in get_eth_info() in GLIUtility. 1353 Fix code to determine default route in get_eth_info() in GLIUtility.
290 Fix serialization of dns-servers in ClientConfig. 1354 Fix serialization of dns-servers in ClientConfig.
291 1355
292 24 Jul 2005; Preston Cody <codeman@gentoo.org> 1356 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
293 changed default values of cron/logger in IP. 1357 changed default values of cron/logger in IP.
294 moved GenDialog IP init out to the individual files. gli-dialog's version 1358 moved GenDialog IP init out to the individual files. gli-dialog's version
295 will change quite a bit. 1359 will change quite a bit.
296 1360
297 22 Jul 2005; Preston Cody <codeman@gentoo.org> 1361 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
298 added ppcArchTemplate. blank now. working on yaboot. 1362 added ppcArchTemplate. blank now. working on yaboot.
299 modified ArchTemplate for amd64 and ppc custom kernels. 1363 modified ArchTemplate for amd64 and ppc custom kernels.
300 skeleton implementation of _configure_yaboot. 1364 skeleton implementation of _configure_yaboot.
301 small fixes to other templates. 1365 small fixes to other templates.
302 1366
303 21 Jul 2005; Preston Cody <codeman@gentoo.org> 1367 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
304 GenDialog updates. changed comment in IP. 1368 GenDialog updates. changed comment in IP.
305 1369
306 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org> 1370 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
307 src/GLIInstallProfile.py: 1371 src/GLIInstallProfile.py:
308 Fix codeman's screwup of changing the service seperator to ',' in the parser 1372 Fix codeman's screwup of changing the service seperator to ',' in the parser
326 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for 1390 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
327 bootloader works again. Also rename _install_{grub,lilo} to 1391 bootloader works again. Also rename _install_{grub,lilo} to
328 _configure_{grub,lilo} since they don't install the loaders anymore 1392 _configure_{grub,lilo} since they don't install the loaders anymore
329 themselves. 1393 themselves.
330 1394
331 7 Jul 2005; Preston Cody <codeman@gentoo.org> 1395 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
332 fix global USE flags to not include the arch types at the end. 1396 fix global USE flags to not include the arch types at the end.
333 updates to GenDialog and gli-d. 1397 updates to GenDialog and gli-d.
334 1398
335 6 Jul 2005; Preston Cody <codeman@gentoo.org> 1399 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
336 fixing bootloader code for no initrd and initrd->initramfs naming change. 1400 fixing bootloader code for no initrd and initrd->initramfs naming change.
337 1401
338 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1402 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
339 Proper comments and parameters to GLIException in install_mta() 1403 Proper comments and parameters to GLIException in install_mta()
340 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors() 1404 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
341 Add strip() to list_mirrors(), list_subarch_from_mirror() and 1405 Add strip() to list_mirrors(), list_subarch_from_mirror() and
342 list_tarball_from_mirror() to eliminate blank last item. 1406 list_tarball_from_mirror() to eliminate blank last item.
343 1407
344 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> 1408 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
345 Added stage3 generation code. 1409 Added stage3 generation code.
346 1410
347 5 Jul 2005; Preston Cody <codeman@gentoo.org> 1411 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
348 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge 1412 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
349 Mild changes to GenDialog. 1413 Mild changes to GenDialog.
350 1414
351 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1415 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
352 Remove separate install step configure_rc_conf() since it's handled by 1416 Remove separate install step configure_rc_conf() since it's handled by
353 update_config_files() 1417 update_config_files()
354 Make a copy of newvalues in _edit_config() so quotes aren't added when the 1418 Make a copy of newvalues in _edit_config() so quotes aren't added when the
355 function is called twice on the same file. 1419 function is called twice on the same file.
356 1420
357 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1421 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
358 Missing \ in sed in _get_packages_to_emerge() 1422 Missing \ in sed in _get_packages_to_emerge()
359 Removed explicit emerging of hotplug and no longer add it to the runlevel. 1423 Removed explicit emerging of hotplug and no longer add it to the runlevel.
360 Check in _quickpkg_deps() to ignore blank package names returned from 1424 Check in _quickpkg_deps() to ignore blank package names returned from
361 _get_packages_to_emerge() 1425 _get_packages_to_emerge()
362 1426
363 28 Jun 2005; Preston Cody <codeman@gentoo.org> 1427 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
364 fixed agaffney's missing = and extra : in x86AT. commented out crashing line 1428 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
365 in the dialog.py gauge code. 1429 in the dialog.py gauge code.
366 1430
367 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1431 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
368 Add code to update_config_files() to go through etc_files and update stuff. 1432 Add code to update_config_files() to go through etc_files and update stuff.
369 Check to see that _etc_files['make.conf'] exists in get_make_conf() 1433 Check to see that _etc_files['make.conf'] exists in get_make_conf()
370 Only use float() in partition xml parsing code if type == "free" 1434 Only use float() in partition xml parsing code if type == "free"
371 1435
372 28 Jun 2005; Preston Cody <codeman@gentoo.org> 1436 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
373 finished almost all internationalization of GenDialog. 1437 finished almost all internationalization of GenDialog.
374 attempt at fixing rc.conf function. moved 3 generate functions out of 1438 attempt at fixing rc.conf function. moved 3 generate functions out of
375 fe/gtk/RcDotConf and put them in Utility. fixed self bug. 1439 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
376 added dialog.py to the fe/dialog directory so it actually gets used. 1440 added dialog.py to the fe/dialog directory so it actually gets used.
377 1441
378 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1442 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
379 Roll rc_conf and make_conf into master etc_files structure in InstallProfile. 1443 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
380 1444
381 27 Jun 2005; Preston Cody <codeman@gentoo.org> 1445 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
382 fix extra entry in list_mirrors() 1446 fix extra entry in list_mirrors()
383 beginning internationalization runthrough. 1447 beginning internationalization runthrough.
384 1448
385 26 Jun 2005; Preston Cody <codeman@gentoo.org> 1449 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
386 added dialog.py to /src temporarily until it gets accepted upstream. 1450 added dialog.py to /src temporarily until it gets accepted upstream.
387 fix for unused value in form in dialog.py and changed heights. 1451 fix for unused value in form in dialog.py and changed heights.
388 fix GenDialog forms. 1452 fix GenDialog forms.
389 1453
390 25 Jun 2005; Preston Cody <codeman@gentoo.org> 1454 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
391 Changed hostname/domainname for new baselayout. 1455 Changed hostname/domainname for new baselayout.
392 Changed _add_to_runlevel errors to logs. 1456 Changed _add_to_runlevel errors to logs.
393 Updated TODO list to show status of GenDialog 1457 Updated TODO list to show status of GenDialog
394 More updates to GenDialog including two checklists that probably won't work. 1458 More updates to GenDialog including two checklists that probably won't work.
395 update IP to use comma-separated list instead of space separated for services. 1459 update IP to use comma-separated list instead of space separated for services.
396 1460
397 24 Jun 2005; Preston Cody <codeman@gentoo.org> 1461 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
398 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to 1462 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
399 GenDialog as it gets closer to completion. 1463 GenDialog as it gets closer to completion.
400 1464
401 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1465 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
402 Modify get_eth_info() to take a full interface name (eth0 fex). float() 1466 Modify get_eth_info() to take a full interface name (eth0 fex). float()
403 instead of int() in add_partition_device_partition() for minor (closes 96804) 1467 instead of int() in add_partition_device_partition() for minor (closes 96804)
404 1468
405 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1469 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
406 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"' 1470 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
407 instead of 'interfaces[interface][1]' since DHCP uses that field for its 1471 instead of 'interfaces[interface][1]' since DHCP uses that field for its
408 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net. 1472 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
409 1473
410 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1474 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
411 Apply spawn() patch from #96644 (with minor changes). Make sure the return 1475 Apply spawn() patch from #96644 (with minor changes). Make sure the return
412 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix 1476 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
413 small error with <pipe>.close() returning None. Fix space vs. tab issue. 1477 small error with <pipe>.close() returning None. Fix space vs. tab issue.
414 Fix undefined variable 'output' issue in spawn(). 1478 Fix undefined variable 'output' issue in spawn().
415 1479
416 20 Jun 2005; Preston Cody <codeman@gentoo.org> 1480 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
417 More updates to GenDialog and gli-d. 1481 More updates to GenDialog and gli-d.
418 1482
419 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1483 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
420 Modify list_mirrors() to return a list of mirror URL/name pairs. 1484 Modify list_mirrors() to return a list of mirror URL/name pairs.
421 1485
422 19 Jun 2005; Preston Cody <codeman@gentoo.org> 1486 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
423 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to 1487 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
424 get subarch. 1488 get subarch.
425 1489
426 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1490 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
427 Backend partitioning will create disklabel is none exists. Installprofile 1491 Backend partitioning will create disklabel is none exists. Installprofile
428 defaults to "" now instead of "msdos" for disklabel type. Fix for 1492 defaults to "" now instead of "msdos" for disklabel type. Fix for
429 mount_local_partitions() to remember device along with minor in the 1493 mount_local_partitions() to remember device along with minor in the
430 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and 1494 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
431 add else block to log unsupported netmount types to mount_network_shares() 1495 add else block to log unsupported netmount types to mount_network_shares()
432 1496
433 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1497 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
434 src/GLIArchitectureTemplate.py: 1498 src/GLIArchitectureTemplate.py:
435 Refactor kernel_compile common stuff, fix 2.4 build process. 1499 Refactor kernel_compile common stuff, fix 2.4 build process.
436 src/fe/cli/clife.py: 1500 src/fe/cli/clife.py:
437 Logging system. 1501 Logging system.
438 src/GLIUtility.py, src/GLIStorageDevice.py: 1502 src/GLIUtility.py, src/GLIStorageDevice.py:
439 Add comments about re-writes needed for boxes without sysfs. 1503 Add comments about re-writes needed for boxes without sysfs.
440 1504
441 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1505 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
442 src/GLIArchitectureTemplate.py: 1506 src/GLIArchitectureTemplate.py:
443 2.4 support (pull version data from /usr/src/linux/Makefile), incl. 1507 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
444 'make dep' call for custom compile. build_mode support for prepare-only and 1508 'make dep' call for custom compile. build_mode support for prepare-only and
445 none types completed. custom compile function chains shell functions in 1509 none types completed. custom compile function chains shell functions in
446 spawned script, to allow for catching all errors. 1510 spawned script, to allow for catching all errors.
447 1511
448 15 Jun 2005; Preston Cody <codeman@gentoo.org> 1512 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
449 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe 1513 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
450 and GenDialog. other gendialog updates as well. kernel updates untested. 1514 and GenDialog. other gendialog updates as well. kernel updates untested.
451 1515
452 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1516 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
453 src/GLIInstallProfile.py: 1517 src/GLIInstallProfile.py:
454 Change structure of etc-portage stuff. The serialization was broken before my 1518 Change structure of etc-portage stuff. The serialization was broken before my
455 last commit, and I am the only person that's ever used it. The new schema is 1519 last commit, and I am the only person that's ever used it. The new schema is
456 as follows: 1520 as follows:
457 <etc-portage> 1521 <etc-portage>
468 </entry> 1532 </entry>
469 </file> 1533 </file>
470 </etc-portage> 1534 </etc-portage>
471 1535
472 1536
473 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1537 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
474 src/GLIInstallProfile.py: 1538 src/GLIInstallProfile.py:
475 Add new entry for gli-profile/kernel-build-method item. Add missing 1539 Add new entry for gli-profile/kernel-build-method item. Add missing
476 serialize_etc_portage (temporary). Make serialize_make_conf always print the 1540 serialize_etc_portage (temporary). Make serialize_make_conf always print the
477 keys in the same order. 1541 keys in the same order.
478 1542
479 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1543 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
480 src/GLIArchitectureTemplate.py: 1544 src/GLIArchitectureTemplate.py:
481 Clean up commenting used by _edit_config(), and fix bug where wrong comment 1545 Clean up commenting used by _edit_config(), and fix bug where wrong comment
482 was repeatedly appended to make.conf. 1546 was repeatedly appended to make.conf.
483 1547
484 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1548 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
486 Put some Linux-2.6 specific code under a if statement. Store list of 1550 Put some Linux-2.6 specific code under a if statement. Store list of
487 successfully mounted swap device for using swapoff. Add proper error checking 1551 successfully mounted swap device for using swapoff. Add proper error checking
488 to install_packages and install_filesystem_tools. Fixed namespace conflicts on 1552 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
489 'file'. Clean up some redundant code (thanks to pychecker).' 1553 'file'. Clean up some redundant code (thanks to pychecker).'
490 1554
491 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1555 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
492 Fix typos: get_extended() instead of get_extended_partition(). Added 1556 Fix typos: get_extended() instead of get_extended_partition(). Added
493 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility. 1557 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
494 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync' 1558 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
495 1559
496 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> 1560 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
497 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed 1561 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
498 in add_network_interface. 1562 in add_network_interface.
499 1563
500 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py: 1564 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1565 src/GLIArchitectureTemplate.py:
501 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any 1566 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
502 usage - this caused a failure for stage1/stage2 previously. swapoff for swap 1567 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
503 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during 1568 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
504 prepare_chroot. 1569 prepare_chroot.
505 1570
507 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog, 1572 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
508 +src/fe/installer-gtk: 1573 +src/fe/installer-gtk:
509 Add new automated CLI frontend. Add scripts that are the intended means to 1574 Add new automated CLI frontend. Add scripts that are the intended means to
510 use each frontend. 1575 use each frontend.
511 1576
512 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1577 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
513 src/GLIClientController.py: 1578 src/GLIClientController.py:
514 Add null type to network config, for cases where the interface is already up 1579 Add null type to network config, for cases where the interface is already up
515 and should not be touched (netboot for example). 1580 and should not be touched (netboot for example).
516 1581
517 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1582 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
518 src/GLIArchitectureTemplate.py: 1583 src/GLIArchitectureTemplate.py:
519 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a 1584 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
520 string!. Try to use binary packages if available by default. 1585 string!. Try to use binary packages if available by default.
521 1586
522 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1587 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
523 src/GLIArchitectureTemplate.py: 1588 src/GLIArchitectureTemplate.py:
524 More error checking for _add_to_runlevel, to ensure that the init script 1589 More error checking for _add_to_runlevel, to ensure that the init script
525 actually exists before we try to add it. set_services phase must take place 1590 actually exists before we try to add it. set_services phase must take place
526 after the package installation, otherwise the init scripts might not exist. 1591 after the package installation, otherwise the init scripts might not exist.
527 Find the correct init script for the cron and logging daemons, and add that 1592 Find the correct init script for the cron and logging daemons, and add that
528 instead of the package atom. 1593 instead of the package atom.
529 1594
530 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1595 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
531 src/GLIArchitectureTemplate.py: 1596 src/GLIArchitectureTemplate.py:
532 Fix up _edit_config so that it works if the file doesn't already exist. Fix 1597 Fix up _edit_config so that it works if the file doesn't already exist. Fix
533 usage of 'file' to 'contents' for the variable name, as it shadows 1598 usage of 'file' to 'contents' for the variable name, as it shadows
534 __builtin__.file. 1599 __builtin__.file.
535 1600
536 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1601 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
537 src/GLIArchitectureTemplate.py: 1602 src/GLIArchitectureTemplate.py:
538 Add MTA install code, and include MTA install phase. Ensure 1603 Add MTA install code, and include MTA install phase. Ensure
539 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support 1604 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
540 for 'none' kernel config for build_kernel phase. Put kernel_script in 1605 for 'none' kernel config for build_kernel phase. Put kernel_script in
541 /var/tmp instead of /root for build_kernel phase. 1606 /var/tmp instead of /root for build_kernel phase.
542 1607
543 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py: 1608 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
544 Rename mta variables to match syslog/cron variables. 1609 Rename mta variables to match syslog/cron variables.
545 1610
546 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1611 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
547 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py, 1612 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
548 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore, 1613 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
549 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore, 1614 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
550 src/templates/.cvsignore, src/tests/.cvsignore: 1615 src/templates/.cvsignore, src/tests/.cvsignore:
551 Refactor partition formatting again to include error checking. Allow 'none' 1616 Refactor partition formatting again to include error checking. Allow 'none'
552 for kernel and bootloader specifications. Add .cvsignore files for .py[co]. 1617 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
553 1618
554 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> 1619 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
555 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py: 1620 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
556 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to 1621 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
557 only have a single spawn call. 1622 only have a single spawn call.
558 1623
559 11 Jun 2005; Preston Cody <codeman@gentoo.org> 1624 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
560 refixed samyron's fix of set_architecture_template. 1625 refixed samyron's fix of set_architecture_template.
561 1626
562 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1627 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
563 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always 1628 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
564 be executable. 1629 be executable.
565 1630
566 10 Jun 2005; Scott Myron <samyron@gentoo.org> 1631 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
567 Fixed one of the FIXME's in the ClientConfiguration. There is now some 1632 Fixed one of the FIXME's in the ClientConfiguration. There is now some
568 error checking when you call set_architecture_template. 1633 error checking when you call set_architecture_template.
569 1634
570 10 Jun 2005; Preston Cody <codeman@gentoo.org> 1635 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
571 moved the mkfsopts input to the partition options menu instead of the during 1636 moved the mkfsopts input to the partition options menu instead of the during
572 the creation process. updated GenDialog to say it supports reiserfs v3. 1637 the creation process. updated GenDialog to say it supports reiserfs v3.
573 1638
574 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py, 1639 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
575 src/GLIStorageDevice.py, fe/dialog/dialogfe.py: 1640 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
576 Complete support for 'mkfsopts' parameter in main system and dialogfe. 1641 Complete support for 'mkfsopts' parameter in main system and dialogfe.
577 Add support for other partition types to dialogfe. 1642 Add support for other partition types to dialogfe.
578 Fix all usages of int(possible_big_number) to long(possible_bit_number) to 1643 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
579 avoid integer overflows and wraparounds. 1644 avoid integer overflows and wraparounds.
580 1645
581 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1646 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
582 Removed start/end from XML output and added mkfsopts to partitioning info. 1647 Removed start/end from XML output and added mkfsopts to partitioning info.
583 'mkfsopts' parameter is now used and support for creating xfs, jfs, and 1648 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
584 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser' 1649 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
585 in GLIClientConfiguration. Change from .1 and .9 to constants for 1650 in GLIClientConfiguration. Change from .1 and .9 to constants for
586 partitioning. Fix free space overwriting bug. Remove a few unused functions 1651 partitioning. Fix free space overwriting bug. Remove a few unused functions
587 from rewrite. Fix call to get_partition_at() 1652 from rewrite. Fix call to get_partition_at()
588 1653
589 8 Jun 2005; Preston Cody <codeman@gentoo.org> 1654 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
590 Updates to GenDialog and dialogfe. 1655 Updates to GenDialog and dialogfe.
591 1656
592 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1657 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
593 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker 1658 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
594 1659
595 6 Jun 2005; Preston Cody <codeman@gentoo.org> 1660 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
596 more GenDialog updates to partitioning. 1661 more GenDialog updates to partitioning.
597 1662
598 5 Jun 2005; Preston Cody <codeman@gentoo.org> 1663 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
599 Indenting issue in GLISD/get_ordered_partition_list. 1664 Indenting issue in GLISD/get_ordered_partition_list.
600 updates to GenDialog partitioning and added default UTC for timezone in IP. 1665 updates to GenDialog partitioning and added default UTC for timezone in IP.
601 1666
602 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1667 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
603 Added GLISD.get_model() 1668 Added GLISD.get_model()
604 1669
605 3 Jun 2005; Preston Cody <codeman@gentoo.org> 1670 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
606 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version. 1671 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
607 More updates to GenDialog :) 1672 More updates to GenDialog :)
608 1673
609 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> 1674 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
610 Added get_interface_realname() function. 1675 Added get_interface_realname() function.
611 1676
612 2 Jun 2005; Preston Cody <codeman@gentoo.org> 1677 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
613 Added auto-save of CConfig and copying to new /root after install. 1678 Added auto-save of CConfig and copying to new /root after install.
614 yet even more GenDialog updates. 1679 yet even more GenDialog updates.
615 1680
616 1 Jun 2005; Preston Cody <codeman@gentoo.org> 1681 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
617 removed print statement from GLISD. more updates to GenDialog. 1682 removed print statement from GLISD. more updates to GenDialog.
618 1683
619 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1684 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
620 Not being able to fetch the stage tarball is now an exception. Chroot wrapper 1685 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
621 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be 1686 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
622 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few 1687 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
623 places in GLIClientConfiguration. 1688 places in GLIClientConfiguration.
624 1689
625 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1690 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
626 Fix mount_local_partitions(), configure_fstab(), and 1691 Fix mount_local_partitions(), configure_fstab(), and
627 install_filesystem_tools() to use GLISD directly. A few more fixes for same. 1692 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
628 A few more fixes for templates/x86Archtemplate 1693 A few more fixes for templates/x86Archtemplate
629 1694
630 27 May 2005; Preston Cody <codeman@gentoo.org> 1695 27 May 2005; Preston Cody <codeman@gentoo.org> :
631 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still 1696 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
632 a work in progress. 1697 a work in progress.
633 1698
634 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1699 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
635 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD 1700 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
636 directly. GLISD can now handle data imported from XML. 1701 directly. GLISD can now handle data imported from XML.
637 1702
638 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1703 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
639 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to 1704 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
640 handle blank (no disklabel) disks. 1705 handle blank (no disklabel) disks.
641 1706
642 20 May 2005; Preston Cody <codeman@gentoo.org> 1707 20 May 2005; Preston Cody <codeman@gentoo.org> :
643 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned 1708 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
644 up, documented, and separated out serialization and grouped all sections. 1709 up, documented, and separated out serialization and grouped all sections.
645 1710
646 19 May 2005; Preston Cody <codeman@gentoo.org> 1711 19 May 2005; Preston Cody <codeman@gentoo.org> :
647 Reorganization of ClientConfiguration and gutting of unused functions. 1712 Reorganization of ClientConfiguration and gutting of unused functions.
648 Removed verbose option from CC. Moved import statement in IP and CConfig up. 1713 Removed verbose option from CC. Moved import statement in IP and CConfig up.
649 1714
650 18 May 2005; Preston Cody <codeman@gentoo.org> 1715 18 May 2005; Preston Cody <codeman@gentoo.org> :
651 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup 1716 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
652 1717
653 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1718 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
654 Fixed bug in finishing_cleanup(). Fix a late-night coding error in 1719 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
655 partitioning. CC serializes install profile to disk and prepare_chroot() 1720 partitioning. CC serializes install profile to disk and prepare_chroot()
656 copies it into /mnt/gentoo/root 1721 copies it into /mnt/gentoo/root
657 1722
658 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1723 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
659 Moved URI parsing into new function parse_uri() 1724 Moved URI parsing into new function parse_uri()
660 1725
661 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1726 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
662 Added XMLParser module. 1727 Added XMLParser module.
663 1728
664 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1729 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
665 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI. 1730 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
666 Minor fix to is_uri() regex to allow hyphens in hostname. 1731 Minor fix to is_uri() regex to allow hyphens in hostname.
667 1732
668 12 May 2005; Preston Cody <codeman@gentoo.org> 1733 12 May 2005; Preston Cody <codeman@gentoo.org> :
669 Updated finishing_cleanup for new unmounting method from agaffney. 1734 Updated finishing_cleanup for new unmounting method from agaffney.
670 1735
671 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1736 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
672 Fix GLILogger to use correct time format string. Fix _edit_config() to 1737 Fix GLILogger to use correct time format string. Fix _edit_config() to
673 properly comment out variables. Fix minor bug in finishing_cleanup(). Add 1738 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
674 unicode support to is_realstring(). 1739 unicode support to is_realstring().
675 1740
676 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1741 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
677 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero 1742 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
678 return value instead of non-zero. Add code to output a traceback to the 1743 return value instead of non-zero. Add code to output a traceback to the
679 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes 1744 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
680 instead of --nocolor. 1745 instead of --nocolor.
681 1746
682 10 May 2005; Preston Cody <codeman@gentoo.org> 1747 10 May 2005; Preston Cody <codeman@gentoo.org> :
683 Added GLIGenDialog.py to make a generic class for the dialog functions that 1748 Added GLIGenDialog.py to make a generic class for the dialog functions that
684 can be used by both dialogfe and the netfe/be. updated both for new filename. 1749 can be used by both dialogfe and the netfe/be. updated both for new filename.
685 date changes. 2004->2005. 1750 date changes. 2004->2005.
686 1751
687 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1752 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
688 Removed 'quiet=True' from spawn() calls 1753 Removed 'quiet=True' from spawn() calls
689 1754
690 10 May 2005; Preston Cody <codeman@gentoo.org> 1755 10 May 2005; Preston Cody <codeman@gentoo.org> :
691 Updated GLIUtility with patches from chotchki. Also added documentation 1756 Updated GLIUtility with patches from chotchki. Also added documentation
692 1757
693 9 May 2005; Preston Cody <codeman@gentoo.org> 1758 9 May 2005; Preston Cody <codeman@gentoo.org> :
694 Added the function for set_etc_portage to ArchTemplate. no step for it yet. 1759 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
695 Updated _edit_config in ArchTemplate, make_config, and various other fixes 1760 Updated _edit_config in ArchTemplate, make_config, and various other fixes
696 from bug #89683, mostly touchups. 1761 from bug #89683, mostly touchups.
697 1762
698 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1763 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
699 GLIStorageDevice cleanup patch from bug #91761 1764 GLIStorageDevice cleanup patch from bug #91761
700 1765
701 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1766 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
702 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix 1767 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
703 _edit_config(). Error logging casts 'error' to str 1768 _edit_config(). Error logging casts 'error' to str
704 1769
705 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1770 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
706 Exceptions received in CC are logged before being passed to the FE. Added 1771 Exceptions received in CC are logged before being passed to the FE. Added
707 code to CC to handle exceptions *not* thrown by the installer itself. 1772 code to CC to handle exceptions *not* thrown by the installer itself.
708 1773
709 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> 1774 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
710 get_max_mb_for_resize() returns -1 if not self.resizeable 1775 get_max_mb_for_resize() returns -1 if not self.resizeable
711 1776
712 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1777 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
713 More dirty rsync hacks :-/ 1778 More dirty rsync hacks :-/
714 1779
715 29 Apr 2005; Preston Cody <codeman@gentoo.org> 1780 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
716 Patches from chotchki (bug #90325) to improve CC networking. untested. 1781 Patches from chotchki (bug #90325) to improve CC networking. untested.
717 1782
718 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1783 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
719 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in 1784 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
720 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split 1785 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
721 'custom' sync option into 'none' and 'snapshot'. Minor fixes to 1786 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
722 GLIStorageDevice as suggested by pychecker. Fix minor bug in 1787 GLIStorageDevice as suggested by pychecker. Fix minor bug in
723 _get_packages_to_emerge(). Fix _quickpkg_deps() to call 1788 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
724 _get_packages_to_emerge() 1789 _get_packages_to_emerge()
725 1790
726 28 Apr 2005; Preston Cody <codeman@gentoo.org> 1791 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
727 Added group-adding code to set_users in ArchTemplate 1792 Added group-adding code to set_users in ArchTemplate
728 1793
729 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1794 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
730 Added post-install script code 1795 Added post-install script code
731 1796
732 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1797 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
733 Fixed encapsulation issues in GLIClientController (bug #90141) 1798 Fixed encapsulation issues in GLIClientController (bug #90141)
734 1799
735 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1800 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
736 Update resizing code in GLIStorageDevice 1801 Update resizing code in GLIStorageDevice
737 1802
738 17 Apr 2005; Preston Cody <codeman@gentoo.org> 1803 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
739 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger. 1804 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
740 1805
741 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1806 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
742 Reverted change to ArchTemplate and added support for commented line in old 1807 Reverted change to ArchTemplate and added support for commented line in old
743 code. 1808 code.
744 1809
745 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1810 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
746 Changed _edit_config() to modify value in-place instead of commenting out and 1811 Changed _edit_config() to modify value in-place instead of commenting out and
747 adding the new value to the end of the file. 1812 adding the new value to the end of the file.
748 1813
749 15 Apr 2005; Preston Cody <codeman@gentoo.org> 1814 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
750 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration. 1815 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
751 Also updated TODO list. 1816 Also updated TODO list.
752 1817
753 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1818 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
754 Use blackace's one-liner to add comments for all function for use with 1819 Use blackace's one-liner to add comments for all function for use with
755 pythondoc. 1820 pythondoc.
756 1821
757 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1822 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
758 Moved 'end >= device_sectors' check out of loop to check for next partition's 1823 Moved 'end >= device_sectors' check out of loop to check for next partition's
759 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86. 1824 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
760 Partitioning code now tracks start/end of extended for placing logicals. End 1825 Partitioning code now tracks start/end of extended for placing logicals. End
761 point of logical is now adjusted along with start. 1826 point of logical is now adjusted along with start.
762 1827
763 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1828 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
764 Finish overhaul of backend partitioning code. Fixed all bugs that stood in 1829 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
765 the way of partitioning from a blank disk. Add int() around access to minor 1830 the way of partitioning from a blank disk. Add int() around access to minor
766 key in partition information due to new partition code leaving them as float. 1831 key in partition information due to new partition code leaving them as float.
767 1832
768 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1833 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
769 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code 1834 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
770 1835
771 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1836 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
772 Major GLIStorageDevice overhaul...all MB now instead of sectors. 1837 Major GLIStorageDevice overhaul...all MB now instead of sectors.
773 1838
774 8 Apr 2005; Scott Myron <samyron@gentoo.org> 1839 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
775 Added support for DHCP options and MAC addresses in the InstallProfile. 1840 Added support for DHCP options and MAC addresses in the InstallProfile.
776 1841
777 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> 1842 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
778 Changed mountopts check to work for blank and whitespace. Pipe emerge through 1843 Changed mountopts check to work for blank and whitespace. Pipe emerge through
779 sed to properly strip out junk. 1844 sed to properly strip out junk.
780 1845
781 2 Apr 2005; Preston Cody <codeman@gentoo.org> 1846 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
782 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel 1847 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
783 added --emptytree to stage2. fixed ethx not being added to runlevel defalt. 1848 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
784 1849
785 31 Mar 2005; Preston Cody <codeman@gentoo.org> 1850 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
786 Fixed indent problem in GLICController 1851 Fixed indent problem in GLICController
787 1852
788 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1853 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
789 Check for disklabel type "loop" and use the device name without a minor. 1854 Check for disklabel type "loop" and use the device name without a minor.
790 1855
791 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1856 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
792 Remove /tmp/compile_output.log and /var/log/install.log when install is 1857 Remove /tmp/compile_output.log and /var/log/install.log when install is
793 complete. Added code to (hopefully) keep 2nd thread running after install. 1858 complete. Added code to (hopefully) keep 2nd thread running after install.
794 Patch from zahna for extra arguments to the kernel. Patch from zahna to add 1859 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
795 get_eth_info() function. Remove most of content in amd64ArchTemplate and 1860 get_eth_info() function. Remove most of content in amd64ArchTemplate and
796 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args 1861 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
797 1862
798 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1863 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
799 Added 'append_log=True' to all spawn() calls using logfile=. Append to log 1864 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
800 when unpacking tarball. 1865 when unpacking tarball.
801 1866
802 28 Mar 2005; Preston Cody <codeman@gentoo.org> 1867 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
803 rewrote filesystem_tools. looks like it works so ripping out all the old 1868 rewrote filesystem_tools. looks like it works so ripping out all the old
804 filesystem_tools code. 1869 filesystem_tools code.
805 1870
806 26 Mar 2005; Preston Cody <codeman@gentoo.org> 1871 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
807 Changed the print statements to logging in the partitioning BE code. 1872 Changed the print statements to logging in the partitioning BE code.
808 the logger may need to be imported to the x86archtemplate. unknown yet. 1873 the logger may need to be imported to the x86archtemplate. unknown yet.
809 Added the finishing_cleanup function. 1874 Added the finishing_cleanup function.
810 added a fix to the logger from BenUrban 1875 added a fix to the logger from BenUrban
811 1876
812 25 Mar 2005; Preston Cody <codeman@gentoo.org> 1877 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
813 changed InstallProfile to remove is_uri check on kernel, stage, and portage 1878 changed InstallProfile to remove is_uri check on kernel, stage, and portage
814 URIs. The blank uri check has been commented out. 1879 URIs. The blank uri check has been commented out.
815 ripped out error checking of set_services. this is done by _add_to_runlevel. 1880 ripped out error checking of set_services. this is done by _add_to_runlevel.
816 1881
817 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1882 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
818 set_stage_tarball_uri() doesn't raise an exception on a blank string. 1883 set_stage_tarball_uri() doesn't raise an exception on a blank string.
819 1884
820 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1885 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
821 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1886 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
822 the install profile if available. Commented out spawn() debugging prints 1887 the install profile if available. Commented out spawn() debugging prints
823 1888
824 23 Mar 2005; Preston Cody <codeman@gentoo.org> 1889 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
825 small changes to setup_network_post. moved adding to runlevel of net.x to 1890 small changes to setup_network_post. moved adding to runlevel of net.x to
826 after the device gets symlinked. added domainname runlevel command. 1891 after the device gets symlinked. added domainname runlevel command.
827 1892
828 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1893 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
829 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in 1894 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
830 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to 1895 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
831 spawn() call in livecd-kernel code to pass environment variables. 1896 spawn() call in livecd-kernel code to pass environment variables.
832 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in 1897 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
833 the install profile if available. 1898 the install profile if available.
834 1899
835 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1900 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
836 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate 1901 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
837 to handle installing the livecd kernel into the new system. 1902 to handle installing the livecd kernel into the new system.
838 1903
839 22 Mar 2005; Preston Cody <codeman@gentoo.org> 1904 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
840 should emerge hotplug and coldplug before adding them to runlevel. 1905 should emerge hotplug and coldplug before adding them to runlevel.
841 1906
842 21 Mar 2005; Preston Cody <codeman@gentoo.org> 1907 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
843 took chroot out of grub_install command. 1908 took chroot out of grub_install command.
844 1909
845 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1910 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
846 Changed chroot wrapper code in spawn() to write the wrapper the python way 1911 Changed chroot wrapper code in spawn() to write the wrapper the python way
847 instead of the bash way to avoid quote conflicts. Added 1912 instead of the bash way to avoid quote conflicts. Added
848 'logfile=self._compile_logfile' to a number of spawn() calls. Added new 1913 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
849 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh' 1914 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
850 as it breaks the piping. 1915 as it breaks the piping.
851 1916
852 20 Mar 2005; Preston Cody <codeman@gentoo.org> 1917 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
853 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo. 1918 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
854 1919
855 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1920 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
856 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in 1921 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
857 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and 1922 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
858 GLIInstallProfile. 1923 GLIInstallProfile.
859 1924
860 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1925 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
861 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs 1926 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
862 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved 1927 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
863 into /mnt/gentoo in prepare_chroot() 1928 into /mnt/gentoo in prepare_chroot()
864 1929
865 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1930 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
866 Add sigunmask.c contributed by d_m (on freenode) to counteract python's 1931 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
867 retarted behavior regarding threads and signals. Add code to convert MB/%/* 1932 retarted behavior regarding threads and signals. Add code to convert MB/%/*
868 to start/end sectors 1933 to start/end sectors
869 1934
870 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1935 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
871 Add 2>&1 to cmd in spawn() 1936 Add 2>&1 to cmd in spawn()
872 1937
873 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1938 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
874 Modified GLIUtility.exitsuccess() to work with return value from 1939 Modified GLIUtility.exitsuccess() to work with return value from
875 commands.getstatusoutput instead of os.waitpid(). spawn() automatically 1940 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
876 creates wrapper script for commands run inside chroot so multiple commands 1941 creates wrapper script for commands run inside chroot so multiple commands
877 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x' 1942 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
878 for the generated script from spawn() 1943 for the generated script from spawn()
879 1944
880 16 Mar 2005; Preston Cody <codeman@gentoo.org> 1945 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
881 Removed default values for stage tarball URI and portage tree URI from 1946 Removed default values for stage tarball URI and portage tree URI from
882 InstallProfile. These should be set by the FEs. also added services step to 1947 InstallProfile. These should be set by the FEs. also added services step to
883 ArchTemplate and coldplug/hotplug runlevels to the genkernel step. 1948 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
884 Possibly fixed CC DHCP bug with -n. (thx agaffney) 1949 Possibly fixed CC DHCP bug with -n. (thx agaffney)
885 1950
886 14 Mar 2005; Preston Cody <codeman@gentoo.org> 1951 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
887 Small fix for setting the default gateway. Also added feature to dialogfe. 1952 Small fix for setting the default gateway. Also added feature to dialogfe.
888 1953
889 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1954 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
890 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid 1955 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
891 1956
892 1 Mar 2005; Preston Cody <codeman@gentoo.org> 1957 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
893 Fixed a bunch of true -> True typos. lots of em 1958 Fixed a bunch of true -> True typos. lots of em
894 only write new resolv.conf if there are dns servers listed. 1959 only write new resolv.conf if there are dns servers listed.
895 1960
896 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> 1961 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
897 Commented out 'display_on_tty8=True' in start_portmap() 1962 Commented out 'display_on_tty8=True' in start_portmap()
898 1963
899 18 Feb 2005; Preston Cody <codeman@gentoo.org> 1964 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
900 added progress bar to dialogfe and fix logger bug in ArchTemplate. 1965 added progress bar to dialogfe and fix logger bug in ArchTemplate.
901 1966
902 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1967 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
903 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved 1968 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
904 lang parameter to __init__() 1969 lang parameter to __init__()
905 1970
906 10 Feb 2005; Preston Cody <codeman@gentoo.org> 1971 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
907 updates to TODO list. 1972 updates to TODO list.
908 1973
909 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1974 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
910 Initial code for quickpkg GRP support. Fix loop to grab packages from 1975 Initial code for quickpkg GRP support. Fix loop to grab packages from
911 'emerge -p blah' 1976 'emerge -p blah'
912 1977
913 6 Feb 2005; Preston Cody <codeman@gentoo.org> 1978 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
914 check for dhcp in the network stuff and emerge it if it is. 1979 check for dhcp in the network stuff and emerge it if it is.
915 added quickpkg to TODO list 1980 added quickpkg to TODO list
916 1981
917 5 Feb 2005; Preston Cody <codeman@gentoo.org> 1982 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
918 Changed the raising of 'warning' exceptions to a simple log of the error 1983 Changed the raising of 'warning' exceptions to a simple log of the error
919 so that the installer can continue. 1984 so that the installer can continue.
920 1985
921 3 Feb 2005; Preston Cody <codeman@gentoo.org> 1986 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
922 Some big changes. First, changed most output to display_on_tty8. 1987 Some big changes. First, changed most output to display_on_tty8.
923 Second, added log lines to all templates. Some smaller fixes such as typos. 1988 Second, added log lines to all templates. Some smaller fixes such as typos.
924 Also did some cleanups of old commented lines. 1989 Also did some cleanups of old commented lines.
925 1990
926 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> 1991 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
927 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban. 1992 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
928 Undo change with fix. Escaping fix in GLIStorageDevice.py 1993 Undo change with fix. Escaping fix in GLIStorageDevice.py
929 1994
930 31 Jan 2005; Preston Cody <codeman@gentoo.org> 1995 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
931 more updates to TODO list. hopefully we'll soon start removing items instead 1996 more updates to TODO list. hopefully we'll soon start removing items instead
932 of adding them. 1997 of adding them.
933 1998
934 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 1999 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
935 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works 2000 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
936 2001
937 27 Jan 2005; Preston Cody <codeman@gentoo.org> 2002 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
938 updated TODO list. (again) 2003 updated TODO list. (again)
939 2004
940 25 Jan 2005; Preston Cody <codeman@gentoo.org> 2005 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
941 changed output of portmap start to display_on_tty8. 2006 changed output of portmap start to display_on_tty8.
942 fixed bootloader for udev and multiple kernels 2007 fixed bootloader for udev and multiple kernels
943 fixed custom kernel config (again) 2008 fixed custom kernel config (again)
944 2009
945 22 Jan 2005; Preston Cody <codeman@gentoo.org> 2010 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
946 changed default value of CC._enable_ssh to True because this is smart. 2011 changed default value of CC._enable_ssh to True because this is smart.
947 added code to allow custom kernel .config. may be unstable and break. sorry. 2012 added code to allow custom kernel .config. may be unstable and break. sorry.
948 2013
949 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2014 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
950 partition() now waits until after it checks for partition flags before delete 2015 partition() now waits until after it checks for partition flags before delete
951 the partitions :P 2016 the partitions :P
952 2017
953 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2018 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
954 Updated TODO. swapon failure it temporarily not an error. swapon is an error 2019 Updated TODO. swapon failure it temporarily not an error. swapon is an error
955 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't 2020 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
956 blank. 2021 blank.
957 2022
958 19 Jan 2005; Preston Cody <codeman@gentoo.org> 2023 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
959 Various fixes related to the add_users function. Still not yet finished. 2024 Various fixes related to the add_users function. Still not yet finished.
960 Added things to the TODO list. Lets start using that! 2025 Added things to the TODO list. Lets start using that!
961 2026
962 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2027 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
963 Added code to x86Template to format newly created partitions. Also added 2028 Added code to x86Template to format newly created partitions. Also added
964 some error checking code. GLIStorageDevice passes 'minor' with data to 2029 some error checking code. GLIStorageDevice passes 'minor' with data to
965 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS 2030 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
966 mounting code. 2031 mounting code.
967 2032
968 18 Jan 2005; Preston Cody <codeman@gentoo.org> 2033 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
969 Took out unnecessary setting of random livecd root password. the cd already 2034 Took out unnecessary setting of random livecd root password. the cd already
970 sets it randomly. 2035 sets it randomly.
971 2036
972 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2037 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
973 Took out an unneeded step from CC's run() 2038 Took out an unneeded step from CC's run()
974 2039
975 15 Jan 2005; Preston Cody <codeman@gentoo.org> 2040 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
976 Attempt at detecting and adding windows partitions to lilo. 2041 Attempt at detecting and adding windows partitions to lilo.
977 2042
978 14 Jan 2005; Preston Cody <codeman@gentoo.org> 2043 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
979 Added lilo code and cleaned up lilo code. also do_partitioning renamed to 2044 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
980 partition. fixed misc exit_status => exitstatus typo. 2045 partition. fixed misc exit_status => exitstatus typo.
981 2046
982 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2047 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
983 Added basic code for resizing filesystems with pyparted. Fixed code for 2048 Added basic code for resizing filesystems with pyparted. Fixed code for
984 resizing ntfs and ext2/3. 2049 resizing ntfs and ext2/3.
985 2050
986 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2051 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
987 Fixed partition() in x86Template so that it scans through logicals and deletes 2052 Fixed partition() in x86Template so that it scans through logicals and deletes
988 before deleting containing extended partition. Also clears partition table to 2053 before deleting containing extended partition. Also clears partition table to
989 be safe before third pass. 2054 be safe before third pass.
990 2055
991 08 Jan 2005; Preston Cody <codeman@gentoo.org> 2056 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
992 Added mount_network_shares. not able to test it from this computer. 2057 Added mount_network_shares. not able to test it from this computer.
993 will test when i get back to school. 2058 will test when i get back to school.
994 also added start_portmap to the client_controller as an always-do. 2059 also added start_portmap to the client_controller as an always-do.
995 agaffney says this is needed for NFS mounts to work. 2060 agaffney says this is needed for NFS mounts to work.
996 2061
997 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2062 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
998 Partial rewrite of partitioning code in x86Template. No longer shells out to 2063 Partial rewrite of partitioning code in x86Template. No longer shells out to
999 parted to perform actions, now uses all pyparted calls. Code "works" in a 2064 parted to perform actions, now uses all pyparted calls. Code "works" in a
1000 test, but still needs lots of TLC. Also modified tests/install.py to work 2065 test, but still needs lots of TLC. Also modified tests/install.py to work
1001 with x86Template and GLIClientConfiguration. 2066 with x86Template and GLIClientConfiguration.
1002 2067
1003 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2068 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1004 Initial move of partitioning code from ArchTemplate to x86Template. 2069 Initial move of partitioning code from ArchTemplate to x86Template.
1005 2070
1006 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2071 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1007 Added grp_install and services to InstallProfile. forgot about the set_root_password 2072 Added grp_install and services to InstallProfile. forgot about the set_root_password
1008 2073
1009 07 Jan 2005; Preston Cody <codeman@gentoo.org> 2074 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1010 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney. 2075 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1011 Test Install ran very well (skipping partitioning). 2076 agaffney. Test Install ran very well (skipping partitioning).
1012 2077
1013 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2078 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1014 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot 2079 My mid-day update. rewrote mount_local_partitions for order of mounting.
1015 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs. 2080 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1016 some may still have eluded me. 2081 partition format. fixed a few _edit_configs. some may still have eluded me.
1017 2082
1018 05 Jan 2005; Preston Cody <codeman@gentoo.org> 2083 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1019 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it. 2084 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
2085 to test it.
1020 Just finished mount_local_partitions in GLIArchitectureTemplate 2086 Just finished mount_local_partitions in GLIArchitectureTemplate
1021 2087
1022 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2088 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1023 Added get_num_sectors() to GLIStorageDevice. 2089 Added get_num_sectors() to GLIStorageDevice.
1024 2090
1025 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> 2091 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1026 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders. 2092 GLIStorageDevice now tracks partition boundaries in sectors instead of
2093 cylinders.
1027 Also now ignores <=100 sectors for free space. Removed remaining depends stuff 2094 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1028 from GLIInstallProfile. 2095 from GLIInstallProfile.
1029 2096
1030 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2097 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1031 GLIStorageDevice returns "unknown" instead of "" for get_type() 2098 GLIStorageDevice returns "unknown" instead of "" for get_type()
1032 2099
1033 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2100 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1034 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to 2101 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1035 actually work. Commented out resizability checking code for speed. 2102 actually work. Commented out resizability checking code for speed.
1036 2103
1037 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2104 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1038 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in 2105 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1039 GLIStorageDevice at the suggestion of plors 2106 in GLIStorageDevice at the suggestion of plors
1040 2107
1041 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2108 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1042 Added a function to GLIUtility to pull a value from a make.conf-style config 2109 Added a function to GLIUtility to pull a value from a make.conf-style config
1043 file. Minor type fix to GLIInstallProfile.py 2110 file. Minor type fix to GLIInstallProfile.py
1044 2111
1045 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> 2112 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1046 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated 2113 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1047 network mounts from partition data structure in GLIInstallProfile 2114 Separated network mounts from partition data structure in GLIInstallProfile
1048 2115
1049 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> 2116 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1050 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem 2117 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1051 can be resized. 2118 can be resized.
1052 2119
1053 27 Oct 2004; Preston Cody <codeman@gentoo.org> 2120 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1054 Added some of the final functions to GLIInstallTemplate. 2121 Added some of the final functions to GLIInstallTemplate.
1055 Yes this project is still active despite rare use of the Changelog! 2122 Yes this project is still active despite rare use of the Changelog!
1056 2123
1057 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2124 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1058 Added the GLIPartitionTools.py file. This is a temporary insertion of 2125 Added the GLIPartitionTools.py file. This is a temporary insertion of
1059 partitioning tools that will eventually go into their own package. 2126 partitioning tools that will eventually go into their own package.
1060 2127
1061 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2128 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1062 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time 2129 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1063 for the program). Added __init__(install_profile, client_configuration) to 2130 run-time for the program). Added __init__(install_profile,
1064 GLI.InstallProfile. This sets install_profile and client_configuration once so as 2131 client_configuration) to GLI.InstallProfile. This sets install_profile and
1065 to avoid constantly passing stuff every time we call a method. 2132 client_configuration once so as to avoid constantly passing stuff every time
2133 we call a method.
1066 2134
1067 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2135 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1068 2136
1069 Added another private method to GLI.InstallTemplate. _edit_config() modifies config 2137 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1070 files without messing up all the other stuff in them. This will be used for making 2138 config files without messing up all the other stuff in them. This will be
1071 changes to make.conf, rc.conf, /etc/conf.d/net, etc... 2139 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1072 2140
1073 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> 2141 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1074 2142
1075 Added GLI.InstallTemplate framework. This is not yet functional. However, it does 2143 Added GLI.InstallTemplate framework. This is not yet functional. However,
1076 have a few basic things. I added two private methods. One is _depends(). This 2144 it does have a few basic things. I added two private methods. One is
1077 will be used for dependency checking (ie. unpacking a tarball requires that 2145 _depends(). This will be used for dependency checking (ie. unpacking a
1078 partitioning has been done). The other is _exec_in_chroot(). This is the exact 2146 tarball requires that partitioning has been done). The other is
1079 same syntax as os.system(), however, instead of being run in the liveCD 2147 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1080 environment, it runs in the chroot. This requires a bit of fork() magic, so I 2148 instead of being run in the liveCD environment, it runs in the chroot. This
1081 isolated the code. Hope to work more this week to get this class formed... 2149 requires a bit of fork() magic, so I isolated the code. Hope to work more
2150 this week to get this class formed...
1082 2151
1083 14 Feb 2004; Eric Sammer <esammer@gentoo.org> 2152 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1084
1085 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for 2153 Added SAX parsing. Made GLI.InstallProfile a subclass of
1086 obvious reasons. Switched kernel_modules and users to be lists instead of tuples 2154 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1087 to allow for easier modification (mutable, rather than immutable objects). Updated 2155 to be lists instead of tuples to allow for easier modification (mutable,
1088 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse(). 2156 rather than immutable objects). Updated existing pydoc and added more.
2157 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1089 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references. 2158 GLI.py a bit. Fixed all accessors to use self references.
1090 Added initial unit test code. 2159 Added initial unit test code.
1091 2160
1092 9 Feb 2004; Eric Sammer <esammer@gentoo.org> 2161 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1093
1094 Added initial changelog. Setting up the basic structure of the CVS repository 2162 Added initial changelog. Setting up the basic structure of the CVS repository
1095 for the project. Added the UML class diagram in docs. Added a skeletal GLI 2163 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1096 python module. Added misc files such news, authors, etc. 2164 python module. Added misc files such news, authors, etc.

Legend:
Removed from v.934  
changed lines
  Added in v.1890

  ViewVC Help
Powered by ViewVC 1.1.20