/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1182 - (show annotations) (download)
Fri Dec 23 22:32:57 2005 UTC (9 years, 3 months ago) by agaffney
File size: 62624 byte(s)
  move some of portage function from GLIAT
  src/GLIArchitectureTemplate.py:
  revamp install_packages() for new GLIPortage

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.542 2005/12/23 22:32:57 agaffney Exp $
5
6 *GLI-0.3 (27 Oct 2005)
7
8 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIPortage.py:
10 initial commit
11 move some of portage function from GLIAT
12 src/GLIArchitectureTemplate.py:
13 revamp install_packages() for new GLIPortage
14
15 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
16 src/GLIArchitectureTemplate.py:
17 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
18
19 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
20 src/net/server/gliserv.py:
21 wrap generated code in a class to isolate it a bit better
22 302 redirects work
23 don't use cgi.escape() for <% %>
24 src/net/server/html/webgli/*:
25 load/save profile
26 src/GLIUtility.py:
27 change /sbin/lspci to just lspci
28
29 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
30 src/GLIClientController.py:
31 change ordering of statements in CC run() while loop to not go past the end
32 of the array
33 src/GLIArchitectureTemplate.py:
34 removed redundant bind mounts
35
36 18 Dec 2005; Preston Cody <codeman@gentoo.org>
37 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
38 added a diagram by blackace from last night.
39 added the glossary in RTF format.
40
41 17 Dec 2005; Preston Cody <codeman@gentoo.org>
42 x86AT: separated out emerge/configure from running of bootloader
43 added MBR drive support to lilo.
44 these changes will likely not work.
45 AT: added setup_and_run_bootloader step.
46
47 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
48 src/net/server/gliserv.py:
49 call generated code in a function
50 src/net/server/html/webgli/*:
51 include top/bottom
52 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
53 src/GLIClientCongifuration.py:
54 install mode magic
55
56 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
57 src/GLIClientController.py:
58 use GLIException when there's an import problem
59 added debug code to show install_steps
60 src/templates/amd64ArchitectureTemplate.py:
61 add . to import path
62 proper path this time: ../../templates
63 src/GLIArchitectureTemplate.py:
64 add _portage_best_version() function
65
66 11 Dec 2005; Preston Cody <codeman@gentoo.org>
67 added initial glossary and gimli diagram to the docs directory.
68 modify gli-dialog to allow editing of the install_profile after loading XML.
69
70 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
71 src/net/server/html/webgli/:
72 converted globaluse, localuse, networkmounts, portagetree, and stageselection
73 moved saveclientconfig stuff into clientconfig
74 moved saveconfigfiles into config files
75 converted etc_portage and makedotconf
76 converted bootloader and kernel
77 convert daemons, extrapackages, networking, review, services, timezone, users
78 src/net/server/gliserv.py:
79 proper 404 handling for .pyhtml extension
80 HTML escape <% %> stuff
81 work around python's sucky regexes
82 src/GLIInstallProfile.py:
83 allow set_{rsync,ftp,http}_proxy() to accept empty values
84
85 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
86 src/net/server/gliserv.py:
87 initial commit of Legolas templating engine
88 302 redirects
89 src/net/server/html/index.html, src/net/server/webgli_template.html:
90 minor changes for new code
91 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
92 initial commit of the conversion from the monolithic WebGLIHandler.py to the
93 one file per path Legolas goodness
94 partitioning[2-4] done
95
96 5 Dec 2005; Preston Cody <codeman@gentoo.org>
97 webgli: dhcp options in CC and post-install.
98 updated comparison chart.
99 webgli: etc/portage/* and distcc support added. not too-well tested.
100
101 4 Dec 2005; Preston Cody <codeman@gentoo.org>
102 webgli_template.html: valign=top on left side.
103 webgli: fix bootloader boot_device. now working.
104 webgli: CC proxy done. post-install proxy in progress.
105
106 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
107 src/net/server/webgli_template.html:
108 increase padding for content cell to 7px and add colspan=2
109
110 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
111 webgli: added graphic bar on top
112 webgli: added hover effects on the links on the left
113 webgli: re-rendered header_bg.png to stretch without artifacts
114
115 3 Dec 2005; Preston Cody <codeman@gentoo.org>
116 webgli: make.conf disabling fixes for dynamic_stage3
117 fixed portage snapshot browse popup
118 all changes tested.
119 webgli: add debug mode to CC screen. the screen still needs lots of work.
120
121 1 Dec 2005; Preston Cody <codeman@gentoo.org>
122 added debug mode question to gli-dialog
123 added CC proxies to CC networking for gli-dialog
124 webgli: fixed skip CC networking if connection active
125 webgli: portage snapshot defaults to CD
126 webgli: bootloader mbr drive selection
127 webgli: USE flags unselectable if dynamic_stage3
128 webgli: manual extra packages and save button.
129
130 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
131 src/GLIUtility.py:
132 change ping count to 2
133 docs/comparison.html
134 initial commit
135
136 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
137 src/templates/x86ArchitectureTemplate.py:
138 fix map() issue with grub code
139 replace kernel_names and initrd_names loops with one-liners
140
141 27 Nov 2005; Preston Cody <codeman@gentoo.org>
142 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
143 initial gli-dialog support for recommended partitioning layout and clear.
144 failure cleanup now an option for gli-dialog.
145 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
146 added comparison list and updated TODO!
147
148 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
149 src/GLIArchitectureTemplate.py:
150 fix to stage1() debug code
151 fix to stage2() debug code
152
153 26 Nov 2005; Preston Cody <codeman@gentoo.org>
154 some more bootloader code fixes. forgot boot_device != mbr_device.
155
156 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
157 src/GLIStorageDevice.py:
158 fix to unallocated space merging when last one is after part 4
159
160 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
161 src/GLIArchitectureTemplate.py:
162 small fix to debugging code in copy_pkg_to_chroot()
163
164 23 Nov 2005; Preston Cody <codeman@gentoo.org>
165 more bugfixes with bootloader code
166 gli-dialog side appears to work
167
168 21 Nov 2005; Preston Cody <codeman@gentoo.org>
169 initial adding of boot_device to backend.
170 initial boot_device support added to gli-dialog.
171 some fixes of my poor coding
172
173 20 Nov 2005; Preston Cody <codeman@gentoo.org>
174 converted gli-dialog to use the install_package_list.
175 gtkfe has already been converted by AllanonJL
176 new way working in gli-dialog now and added to webgli.
177 added set/get_boot_device() to IP
178
179 19 Nov 2005; Preston Cody <codeman@gentoo.org>
180 get_install_package_list added to InstallProfile. This can be used by the FEs
181
182 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
183 src/templates/x86ArchitectureTemplate.py:
184 call ls with '-1 --color=no'
185
186 16 Nov 2005; Preston Cody <codeman@gentoo.org>
187 added warning (#9) to GRP ppl about stage3 tarballs
188
189 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
190 src/GLIArchitectureTemplate.py:
191 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
192 confused
193
194 13 Nov 2005; Preston Cody <codeman@gentoo.org>
195 removed protocols from rc.conf screens
196 finished initial rc.conf and make.conf in webgli
197
198 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
199 src/net/server/gliserv.py:
200 add -h option to usage()
201 show time and request URI in debug mode
202 show client IP in debug mode
203 just use IP instead of trying to do a reverse lookup
204
205 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
206 src/net/server/gliserv.py:
207 'classier' 401 message
208 proper commandline parsing
209 help via -h
210 user/pass can be specificed via commandline option
211
212 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
213 src/net/server/gliserv.py:
214 basic HTTP auth
215
216 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
217 src/net/server/gliserv.py:
218 dynamic module reloading (yipee!)
219 send 'Last-Modified' header for real files
220 respond to HEAD with just headers
221 src/net/server/handlers/WebGLIHandler.py:
222 icons for drives
223
224 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
225 src/net/server/handlers/WebGLIHandler.py:
226 initial 'pretty' partition table display support
227 clicking partition in 'pretty' display works instead of radio buttons
228 radio buttons and pretty display work together
229 META redirect instead of javascript
230 pretty display stretches across entire screen
231 'Recommended layout' and 'Clear drive' functions
232 properly catch exceptions from do_recommended()
233 src/GLIArchitectureTemplate.py:
234 replace preinst, copy, postinst, rm steps with qmerge
235 whoops...that shouldn't have been commented out
236 create image_dir with -p in copy_pkg_to_chroot()
237 more generic of symlink crappiness
238 new copy_pkg_to_chroot() actually works now
239
240 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
241 src/GLIStorageDevice.py:
242 initial generic disk support
243 fixes for add_partition() code
244 src/net/server/handlers/WebGLIHandler.py:
245 added support for creating generic disks
246 add new partition working
247 save and delete partitions
248
249 6 Nov 2005; Preston Cody <codeman@gentoo.org>
250 webgli: Partitioning making progress.
251
252 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
253 src/GLIArchitectureTemplate.py:
254 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
255 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
256 dir) and works around /etc/gconf symlink problem
257
258 5 Nov 2005; Preston Cody <codeman@gentoo.org>
259 webgli: lots of updates. preliminary partitioning. extra packages works.
260
261 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
262 src/net/server/gliserv.py:
263 httpd now supports HTTPS and falls back to HTTP if not available
264 make fallback actually work
265 src/net/server/SecureXMLRPCServer.py:
266 SecureSocketServer is now threaded
267
268 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
269 src/net/client/gliclient.py:
270 try to use HTTPS for XMLRPC first and fallback to HTTP
271 pretend mode
272 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
273 HTTPS XMLRPC goodness from samyron
274 pass name of certificate
275
276 31 Oct 2005; Preston Cody <codeman@gentoo.org>
277 wegli: daemons and services screens done.
278
279 30 Oct 2005; Preston Cody <codeman@gentoo.org>
280 webgli: networking and users screens
281 added return_redirect to handler.py
282 loading and saving install/client profiles works for webgli now
283 Review also done
284
285 *GLI-0.2 (27 Oct 2005)
286
287 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
288 src/templates/x86ArchitectureTemplate.py:
289 properly check for bootloader emerge exist status with exitsuccess()
290 log output of grub install command
291 add --batch --no-floppy to grub command
292 grubinstallstring only gets logged if debug is on
293 src/GLIUtility.py:
294 update progress bar to 100% when process finishes
295
296 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
297 src/GLIClientController.py:
298 added debugging code for the interaction between the 2 threads via Event()
299 src/GLIUtility.py:
300 doubled the buffer size in spawn()
301 bump buffer size up to 16384
302 only report progress in 5% increments
303 src/GLIArchitectureTemplate.py:
304 kernelpkgs.txt support code
305 above disabled because it sucks
306 added add_pkg_to_world()
307
308 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
309 src/GLIArchitectureTemplate.py:
310 use tar | tar to copy files in copy_pkg_to_chroot()
311 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
312
313 23 Oct 2005; Preston Cody <codeman@gentoo.org>
314 DEBUGGING ADDED TO AT. verbose field added to CConfig.
315
316 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
317 src/net/server/gliserv.py:
318 / maps to index.html
319 look for actual files in html/
320 src/net/html:
321 new template
322 src/GLIUtility.py:
323 added parse_vdb_contents()
324 src/GLIArchitectureTemplate.py:
325 added copy_pkg_to_chroot()
326 added debug code to dynamic-stage3
327 switch dynamic-stage3 to new method
328 lots of bug fixes from adding debug code
329
330 22 Oct 2005; Preston Cody <codeman@gentoo.org>
331 webgli initial bootloader support + changed make.conf.
332 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
333
334 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
335 src/GLIUtility.py:
336 horrible tangled mess of code that is tarball unpacking subprogress display
337 add unpack progress to portage snapshot
338 use read() instead of readlines() in spawn()
339 only update progress bar for whole percents
340
341 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
342 src/templates/x86ArchitectureTemplate.py:
343 change call to 'grub' to use GLIUtility.exitsuccess()
344 add definition of 'build_mode' in _configure_lilo()
345 src/misc/updategtkfe, src/misc/updateglid:
346 fix so subshell is called in root shell
347
348 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
349 src/net/server/handlers/WebGLIHandler.py:
350 stage screen launches URI browser in sized window with various properties set
351
352 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
353 src/misc/updategtkfe:
354 updated to actually work
355 remove previous snapshot and extracted dir before downloading
356 src/misc/updateglid:
357 updated to actually work
358 src/templates/x86ArchitectureTemplate.py:
359 fixed bug where grub code was looking for 'root+root+file_name2'
360
361 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
362 src/net/server/handlers/WebGLIHandler.py:
363 URI browser
364 added mirror selection
365 src/GLIUtility.py:
366 ls via ssh strips off ending *
367
368 16 Oct 2005; Preston Cody <codeman@gentoo.org>
369 more updates to webgli. stage selection.
370
371 11 Oct 2005; Preston Cody <codeman@gentoo.org>
372 updated webgli with preliminary Network Mounts support.
373
374 9 Oct 2005; Preston Cody <codeman@gentoo.org>
375 GenDialog: string formatting and yes/no label fixes.
376 added WebGLI template for gliserv.py
377 added WebGLIHandler as well as a definition for it in gliserv.py
378 updates to the webgli files even though they won't be there for long.
379 Utility: remove exception for non-existant grppkgs.txt until the new livecd
380 goes public.
381
382 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
383 src/net/server/gliserv.py:
384 override dict to not be so anal
385 main server now loads separate module to handle requests
386 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
387 split out profile URLs into separate handler function
388 move handlers into subdirectory
389 add Welcome and Clients handlers
390
391 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
392 src/GLIUtility.py:
393 raise exception if password prompt received twice
394
395 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
396 src/GLIUtility.py:
397 removed rot13ify()
398
399 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
400 src/net/server/gliserv.py:
401 allow for param to be passed multiple times in GET
402 no XMLRPC functions return None
403 modify POST request parsing to only create a list if needed
404 fix GET request parsing so the list creation for multiple values works
405 src/net/client/gliclient.py:
406 various typo and type mismatch fixes
407 exit after exception
408
409 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/net/client/gliclient.py:
411 initial commit
412 pass MAC to XMLRPC functions
413 src/net/server/GLIServerProfile.py:
414 rename GLIClientsProfiles to GLIServerProfile
415
416 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
417 src/net/server/gliserv.py:
418 now handles POST requests
419 move majority of request handling code to common_handler() to reduce code
420 duplication
421 profile loading
422 client reg via XMLRPC goes into SharedInfo()
423 /showclients redesign
424 template fixes
425 allow handler functions to add/change headers
426 save profile
427
428 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
429 src/net/server/GLIClientsProfiles.py:
430 initial commit
431 src/net/server/template.html:
432 initial commit
433 src/net/server/gliserv.py:
434 add template mojo
435
436 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
437 src/net/server/gliserv.py:
438 XMLRPC mojo
439
440 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
441 src/GLIArchitectureTemplate.py:
442 add code in _edit_config() to comment line where variable is defined
443 previously
444 insert new line under previous definition of variable if it exists
445 small _edit_config() cleanup
446 src/GLIStorageDevice.py:
447 add clear_partitions() function
448 new sizes for recommended partition layout
449 automatically calculate swap size for recommended layout
450
451 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
452 src/templates/x86ArchitectureTemplate.py:
453 fat16 mojo
454
455 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
456 src/GLIStorageDevice.py:
457 prevent do_recommended() from being run twice
458 rewrite do_recommended() to be more robust
459 src/GLIArchitectureTemplate.py:
460 rework _edit_config() to not write duplicate entries
461
462 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
463 src/GLIStorageDevice.py:
464 added do_recommended() function to automatically created 256M/1G/* layout
465
466 17 Sep 2005; Preston Cody <codeman@gentoo.org>
467 src/gli-dialog.py: added set_distcc to the list
468 GenDialog: added set_distcc. untested.
469 IP: added install_distcc flag.
470 AT: added install_distcc function based on the flag. runs after build_kernel
471 changed AT spawn command for distcc for nodeps.
472
473 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
474 src/GLIUtility.py:
475 add rot13ify() function
476
477 16 Sep 2005; Preston Cody <codeman@gentoo.org>
478 src/GenDialog.py
479 added a sentence of text. unchecking support added.
480
481 15 Sep 2005; Preston Cody <codeman@gentoo.org>
482 src/GLIUtility.py
483 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
484 src/GenDialog.py
485 still working on extra_packages. transformed the list to new format.
486 added GRP indication to list. untested.
487 TODO lists updated.
488 src/fe/dialog/gli-dialog.py
489 spelling mistook.
490
491 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
492 src/GLIUtility.py:
493 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
494
495 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
496 src/GLIUtility.py:
497 add get_directory_listing_from_uri()
498 add http support to above
499 add ftp support to above
500 add scp support to above
501 src/GLIArchitectureTemplate.py:
502 "0" instead of 0 for key of single-element dict passed to _edit_config()
503
504 5 Sep 2005; Preston Cody <codeman@gentoo.org>
505 value_only -> only_value
506
507 3 Sep 2005; Preston Cody <codeman@gentoo.org>
508 gutted out all of etc_portage structure since it is now all handled by
509 etc_files
510
511 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
512 src/GLIArchitectureTemplate.py:
513 install_packages() sends progress update notifications
514 src/templates/x86ArchitectureTemplate.py:
515 increase sleep to 5s between format tries
516 src/GLIClientController.py:
517 pass 'self' to AT instead of 'self._pretend'
518
519 2 Sep 2005; Preston Cody <codeman@gentoo.org>
520 logger -> logger.log in x86AT
521
522 1 Sep 2005; Preston Cody <codeman@gentoo.org>
523 added set_etc_portage to IP. debugging gli-d's support for it.
524
525 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
526 src/templates/x86ArchitectureTemplate.py:
527 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
528
529 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
530 src/GLIArchitectureTemplate.py:
531 add _portage_best_version() function and rework install_packages() to allow
532 for future X of Y tracking
533 Use best_visible instead of best_version
534 tracked down and fixed missing = causing empty install extra packages
535 use = when emerging also
536 quickpkg hokey pokey
537 run _get_packages_to_emerge() again with -pk
538
539 22 Aug 2005; Preston Cody <codeman@gentoo.org>
540 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
541 the end of install_packages.
542 added updateglid to /src/misc
543 updated all core files with new GPL notice and copyright statement.
544
545 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
546 src/GLIUtility.py:
547 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
548 a snapshot in /mnt/cdrom/snapshots/
549 get_snapshot_from_cd() adds file:// at the beginning
550 change calls to extra package special case functions to 'self.blah'
551
552 21 Aug 2005; Preston Cody <codeman@gentoo.org>
553 src/ArchTemplate: changed "voodoo".
554 changed order of portage sync methods. made a fallback to webrsync if
555 normal emerge sync fails.
556 removed get_sources_from_cd because it is obsolete.
557 add special cases to install_packages. remove fatal exception on package
558 install failure b/c the box will still be bootable.
559 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
560 handled in the FEs.
561 src/GenDialog: added a bunch of code for dealing with x11-based packages.
562 awaiting testing.
563
564 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
565 src/GLIStorageDevice.py:
566 global try/except block around fs resizable detection code
567 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
568 install-failed cleanup function
569
570 18 Aug 2005; Preston Cody <codeman@gentoo.org>
571 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
572
573 16 Aug 2005; Preston Cody <codeman@gentoo.org>
574 GLIGenDialog:
575 add drive choices for loaded configs.
576 force snapshot for dynamic_stage3
577 init the snapshoturi input to the cd snapshot if not already selected.
578 if dynamic_stage3, skip the make.conf step.
579 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
580 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
581
582 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
583 src/GLIArchitectureTemplate.py:
584 manually call MAKEDEV in stage3-dynamic code
585 copy /etc/inittab.old to /etc/inittab in chroot
586 src/GLIUtility.py:
587 add beginning of validate_uri() function
588 add file:/// support to validate_uri()
589 single quotes when setting livecd password
590
591 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
592 src/GLIGenDialog.py:
593 change getmountpoint() to get_mountpoint()
594 src/misc/updategtkfe:
595 committed script to automatically download latest snapshot and run gtkfe
596 src/templates/x86ArchitectureTemplate.py:
597 fix _configure_lilo_add_windows() for IP -> GLISD stuff
598 src/GLIArchitectureTemplate.py:
599 give tmp_minor an initial value in mount_local_partitions so that the value
600 remain from the previous drive
601
602 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
603 src/templates/x86ArchitectureTemplate.py:
604 Fix _configure_lilo() for IP using GLISD stuff
605 src/GLIArchitectureTemplate.py:
606 install_cron_daemon() treats "none" specially
607
608 14 Aug 2005; Preston Cody <codeman@gentoo.org>
609 old patch from Steven Mertens to resolve bug #96642
610 numerous asthetic changes to GenDialog, no real functionality changes though.
611 strings renamed for global use if necessary.
612 fix all three parts of bug 102291
613 disable set_etc_portage until fully-written.
614
615 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
616 src/GLIClientController.py:
617 lower-case http/ftp proxy envvars
618
619 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
620 src/GLIClientController.py:
621 log end of pre_install steps to aid in debugging
622 src/templates/x86ArchitectureTemplate.py:
623 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
624
625 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
626 src/GLIArchitectureTemplate.py
627 check to make sure that the device node we're wait for to exist isn't of
628 type 'free'
629
630 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
631 src/GLIGenDialog.py:
632 convert install_packages to list in set_extra_packages()
633 check return code of checklist() call in "Manual" section
634 *actually* fix the first problem
635
636 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
637 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
638 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
639
640 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
641 src/GLIArchitectureTemplate.py:
642 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
643
644 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
645 Add CDATA support to SimpleXMLParser and add utility functions for it.
646
647 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
648 src/GLIArchitectureTemplate.py:
649 Fix case where vixie-cron is specified as a full package atom, as we still
650 don't want to run 'crontab /etc/crontab' for it.
651
652 *GLI-0.1 (3 Aug 2005)
653
654 30 Jul 2005; Preston Cody <codeman@gentoo.org>
655 add scp to list of is_uri() so GenDialog doesn't complain.
656 fixed livecd-kernel bug in bootloader code.
657 fixed gendialog for dynamic_stage3 instead of "networkless"
658 change bootloader to allow for both initrd and initramfs.
659 fix IP for dynamic_stage3.
660 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
661
662 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
663 Added full scp:// URI support to get_uri() in GLIUtility
664 Remove "networkless" from dynamic stage3 if locic.
665 Remove print statement from scp:// code.
666 Change scp code to check for "assword: " instead of "Password:"
667 Fix post-install network code to create net.eth1+ symlink correctly
668 Check to make sure pkg can be split on / and some debugging code
669 Add 2>dev/null to emerge call in _get_packages_to_emerge()
670 SimpleXMLParser handles True/False/None correctly now
671 Comment out above fix
672 Add partitioning wait-for-device-to-exist code to mount_local_partitions
673
674 28 Jul 2005; Scott Myron <samyron@gentoo.org>
675 Removed a FIXME in the GLIClientConfiguration that is no
676 longer needed.
677
678 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
679 Default to x86 in ClientConfig
680 Typo in build-a-stage3 code.
681 Remove MAKEDEV call in build-a-stage3 postscript.
682
683 26 Jul 2005; Preston Cody <codeman@gentoo.org>
684 Rewrote init of IP for gli-d. Other GenDialog updates.
685 allow network_type to be None in CConfig.
686
687 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
688 Add _dynamic_stage3 option to IP.
689 Add check for that option to dynamic stage3 code in ArchTemplate.
690 Fix code to determine default route in get_eth_info() in GLIUtility.
691 Fix serialization of dns-servers in ClientConfig.
692
693 24 Jul 2005; Preston Cody <codeman@gentoo.org>
694 changed default values of cron/logger in IP.
695 moved GenDialog IP init out to the individual files. gli-dialog's version
696 will change quite a bit.
697
698 22 Jul 2005; Preston Cody <codeman@gentoo.org>
699 added ppcArchTemplate. blank now. working on yaboot.
700 modified ArchTemplate for amd64 and ppc custom kernels.
701 skeleton implementation of _configure_yaboot.
702 small fixes to other templates.
703
704 21 Jul 2005; Preston Cody <codeman@gentoo.org>
705 GenDialog updates. changed comment in IP.
706
707 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
708 src/GLIInstallProfile.py:
709 Fix codeman's screwup of changing the service seperator to ',' in the parser
710 without changing it in the serialization code! Also document this in a
711 comment so you find it easier. Everybody needs to make sure they update
712 their install profiles!
713
714 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
715 src/GLIArchitectureTemplate.py:
716 Fix casting of list to string and concat of None with string, as well as
717 commented prototype of checking that mounting actually worked (found a case
718 where mount can return success, but the mount won't be done).
719
720 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
721 src/templates/x86ArchitectureTemplate.py:
722 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
723 checking for the device, and sleeping 1 second each time.
724
725 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
726 src/templates/x86ArchitectureTemplate.py:
727 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
728 bootloader works again. Also rename _install_{grub,lilo} to
729 _configure_{grub,lilo} since they don't install the loaders anymore
730 themselves.
731
732 7 Jul 2005; Preston Cody <codeman@gentoo.org>
733 fix global USE flags to not include the arch types at the end.
734 updates to GenDialog and gli-d.
735
736 6 Jul 2005; Preston Cody <codeman@gentoo.org>
737 fixing bootloader code for no initrd and initrd->initramfs naming change.
738
739 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
740 Proper comments and parameters to GLIException in install_mta()
741 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
742 Add strip() to list_mirrors(), list_subarch_from_mirror() and
743 list_tarball_from_mirror() to eliminate blank last item.
744
745 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
746 Added stage3 generation code.
747
748 5 Jul 2005; Preston Cody <codeman@gentoo.org>
749 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
750 Mild changes to GenDialog.
751
752 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
753 Remove separate install step configure_rc_conf() since it's handled by
754 update_config_files()
755 Make a copy of newvalues in _edit_config() so quotes aren't added when the
756 function is called twice on the same file.
757
758 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
759 Missing \ in sed in _get_packages_to_emerge()
760 Removed explicit emerging of hotplug and no longer add it to the runlevel.
761 Check in _quickpkg_deps() to ignore blank package names returned from
762 _get_packages_to_emerge()
763
764 28 Jun 2005; Preston Cody <codeman@gentoo.org>
765 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
766 in the dialog.py gauge code.
767
768 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
769 Add code to update_config_files() to go through etc_files and update stuff.
770 Check to see that _etc_files['make.conf'] exists in get_make_conf()
771 Only use float() in partition xml parsing code if type == "free"
772
773 28 Jun 2005; Preston Cody <codeman@gentoo.org>
774 finished almost all internationalization of GenDialog.
775 attempt at fixing rc.conf function. moved 3 generate functions out of
776 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
777 added dialog.py to the fe/dialog directory so it actually gets used.
778
779 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
780 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
781
782 27 Jun 2005; Preston Cody <codeman@gentoo.org>
783 fix extra entry in list_mirrors()
784 beginning internationalization runthrough.
785
786 26 Jun 2005; Preston Cody <codeman@gentoo.org>
787 added dialog.py to /src temporarily until it gets accepted upstream.
788 fix for unused value in form in dialog.py and changed heights.
789 fix GenDialog forms.
790
791 25 Jun 2005; Preston Cody <codeman@gentoo.org>
792 Changed hostname/domainname for new baselayout.
793 Changed _add_to_runlevel errors to logs.
794 Updated TODO list to show status of GenDialog
795 More updates to GenDialog including two checklists that probably won't work.
796 update IP to use comma-separated list instead of space separated for services.
797
798 24 Jun 2005; Preston Cody <codeman@gentoo.org>
799 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
800 GenDialog as it gets closer to completion.
801
802 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
803 Modify get_eth_info() to take a full interface name (eth0 fex). float()
804 instead of int() in add_partition_device_partition() for minor (closes 96804)
805
806 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
807 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
808 instead of 'interfaces[interface][1]' since DHCP uses that field for its
809 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
810
811 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
812 Apply spawn() patch from #96644 (with minor changes). Make sure the return
813 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
814 small error with <pipe>.close() returning None. Fix space vs. tab issue.
815 Fix undefined variable 'output' issue in spawn().
816
817 20 Jun 2005; Preston Cody <codeman@gentoo.org>
818 More updates to GenDialog and gli-d.
819
820 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
821 Modify list_mirrors() to return a list of mirror URL/name pairs.
822
823 19 Jun 2005; Preston Cody <codeman@gentoo.org>
824 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
825 get subarch.
826
827 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
828 Backend partitioning will create disklabel is none exists. Installprofile
829 defaults to "" now instead of "msdos" for disklabel type. Fix for
830 mount_local_partitions() to remember device along with minor in the
831 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
832 add else block to log unsupported netmount types to mount_network_shares()
833
834 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
835 src/GLIArchitectureTemplate.py:
836 Refactor kernel_compile common stuff, fix 2.4 build process.
837 src/fe/cli/clife.py:
838 Logging system.
839 src/GLIUtility.py, src/GLIStorageDevice.py:
840 Add comments about re-writes needed for boxes without sysfs.
841
842 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
843 src/GLIArchitectureTemplate.py:
844 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
845 'make dep' call for custom compile. build_mode support for prepare-only and
846 none types completed. custom compile function chains shell functions in
847 spawned script, to allow for catching all errors.
848
849 15 Jun 2005; Preston Cody <codeman@gentoo.org>
850 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
851 and GenDialog. other gendialog updates as well. kernel updates untested.
852
853 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
854 src/GLIInstallProfile.py:
855 Change structure of etc-portage stuff. The serialization was broken before my
856 last commit, and I am the only person that's ever used it. The new schema is
857 as follows:
858 <etc-portage>
859 <file name="package.mask"/>
860 <file name="package.unmask">
861 <entry atom="sys-kernel/openmosix-sources"/>
862 </file>
863 <file name="package.use">
864 <entry atom="sys-libs/db">
865 -java
866 </entry>
867 <entry atom="dev-libs/cyrus-sasl">
868 -ldap
869 </entry>
870 </file>
871 </etc-portage>
872
873
874 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
875 src/GLIInstallProfile.py:
876 Add new entry for gli-profile/kernel-build-method item. Add missing
877 serialize_etc_portage (temporary). Make serialize_make_conf always print the
878 keys in the same order.
879
880 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
881 src/GLIArchitectureTemplate.py:
882 Clean up commenting used by _edit_config(), and fix bug where wrong comment
883 was repeatedly appended to make.conf.
884
885 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
886 src/GLIArchitectureTemplate.py:
887 Put some Linux-2.6 specific code under a if statement. Store list of
888 successfully mounted swap device for using swapoff. Add proper error checking
889 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
890 'file'. Clean up some redundant code (thanks to pychecker).'
891
892 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
893 Fix typos: get_extended() instead of get_extended_partition(). Added
894 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
895 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
896
897 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
898 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
899 in add_network_interface.
900
901 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
902 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
903 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
904 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
905 prepare_chroot.
906
907 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
908 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
909 +src/fe/installer-gtk:
910 Add new automated CLI frontend. Add scripts that are the intended means to
911 use each frontend.
912
913 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
914 src/GLIClientController.py:
915 Add null type to network config, for cases where the interface is already up
916 and should not be touched (netboot for example).
917
918 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
919 src/GLIArchitectureTemplate.py:
920 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
921 string!. Try to use binary packages if available by default.
922
923 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
924 src/GLIArchitectureTemplate.py:
925 More error checking for _add_to_runlevel, to ensure that the init script
926 actually exists before we try to add it. set_services phase must take place
927 after the package installation, otherwise the init scripts might not exist.
928 Find the correct init script for the cron and logging daemons, and add that
929 instead of the package atom.
930
931 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
932 src/GLIArchitectureTemplate.py:
933 Fix up _edit_config so that it works if the file doesn't already exist. Fix
934 usage of 'file' to 'contents' for the variable name, as it shadows
935 __builtin__.file.
936
937 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
938 src/GLIArchitectureTemplate.py:
939 Add MTA install code, and include MTA install phase. Ensure
940 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
941 for 'none' kernel config for build_kernel phase. Put kernel_script in
942 /var/tmp instead of /root for build_kernel phase.
943
944 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
945 Rename mta variables to match syslog/cron variables.
946
947 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
948 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
949 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
950 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
951 src/templates/.cvsignore, src/tests/.cvsignore:
952 Refactor partition formatting again to include error checking. Allow 'none'
953 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
954
955 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
956 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
957 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
958 only have a single spawn call.
959
960 11 Jun 2005; Preston Cody <codeman@gentoo.org>
961 refixed samyron's fix of set_architecture_template.
962
963 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
964 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
965 be executable.
966
967 10 Jun 2005; Scott Myron <samyron@gentoo.org>
968 Fixed one of the FIXME's in the ClientConfiguration. There is now some
969 error checking when you call set_architecture_template.
970
971 10 Jun 2005; Preston Cody <codeman@gentoo.org>
972 moved the mkfsopts input to the partition options menu instead of the during
973 the creation process. updated GenDialog to say it supports reiserfs v3.
974
975 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
976 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
977 Complete support for 'mkfsopts' parameter in main system and dialogfe.
978 Add support for other partition types to dialogfe.
979 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
980 avoid integer overflows and wraparounds.
981
982 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
983 Removed start/end from XML output and added mkfsopts to partitioning info.
984 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
985 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
986 in GLIClientConfiguration. Change from .1 and .9 to constants for
987 partitioning. Fix free space overwriting bug. Remove a few unused functions
988 from rewrite. Fix call to get_partition_at()
989
990 8 Jun 2005; Preston Cody <codeman@gentoo.org>
991 Updates to GenDialog and dialogfe.
992
993 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
994 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
995
996 6 Jun 2005; Preston Cody <codeman@gentoo.org>
997 more GenDialog updates to partitioning.
998
999 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1000 Indenting issue in GLISD/get_ordered_partition_list.
1001 updates to GenDialog partitioning and added default UTC for timezone in IP.
1002
1003 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1004 Added GLISD.get_model()
1005
1006 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1007 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1008 More updates to GenDialog :)
1009
1010 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1011 Added get_interface_realname() function.
1012
1013 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1014 Added auto-save of CConfig and copying to new /root after install.
1015 yet even more GenDialog updates.
1016
1017 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1018 removed print statement from GLISD. more updates to GenDialog.
1019
1020 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1021 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1022 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1023 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1024 places in GLIClientConfiguration.
1025
1026 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1027 Fix mount_local_partitions(), configure_fstab(), and
1028 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1029 A few more fixes for templates/x86Archtemplate
1030
1031 27 May 2005; Preston Cody <codeman@gentoo.org>
1032 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1033 a work in progress.
1034
1035 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1036 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1037 directly. GLISD can now handle data imported from XML.
1038
1039 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1040 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1041 handle blank (no disklabel) disks.
1042
1043 20 May 2005; Preston Cody <codeman@gentoo.org>
1044 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1045 up, documented, and separated out serialization and grouped all sections.
1046
1047 19 May 2005; Preston Cody <codeman@gentoo.org>
1048 Reorganization of ClientConfiguration and gutting of unused functions.
1049 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1050
1051 18 May 2005; Preston Cody <codeman@gentoo.org>
1052 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1053
1054 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1055 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1056 partitioning. CC serializes install profile to disk and prepare_chroot()
1057 copies it into /mnt/gentoo/root
1058
1059 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1060 Moved URI parsing into new function parse_uri()
1061
1062 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1063 Added XMLParser module.
1064
1065 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1066 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1067 Minor fix to is_uri() regex to allow hyphens in hostname.
1068
1069 12 May 2005; Preston Cody <codeman@gentoo.org>
1070 Updated finishing_cleanup for new unmounting method from agaffney.
1071
1072 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1073 Fix GLILogger to use correct time format string. Fix _edit_config() to
1074 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1075 unicode support to is_realstring().
1076
1077 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1078 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1079 return value instead of non-zero. Add code to output a traceback to the
1080 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1081 instead of --nocolor.
1082
1083 10 May 2005; Preston Cody <codeman@gentoo.org>
1084 Added GLIGenDialog.py to make a generic class for the dialog functions that
1085 can be used by both dialogfe and the netfe/be. updated both for new filename.
1086 date changes. 2004->2005.
1087
1088 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1089 Removed 'quiet=True' from spawn() calls
1090
1091 10 May 2005; Preston Cody <codeman@gentoo.org>
1092 Updated GLIUtility with patches from chotchki. Also added documentation
1093
1094 9 May 2005; Preston Cody <codeman@gentoo.org>
1095 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1096 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1097 from bug #89683, mostly touchups.
1098
1099 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1100 GLIStorageDevice cleanup patch from bug #91761
1101
1102 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1103 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1104 _edit_config(). Error logging casts 'error' to str
1105
1106 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1107 Exceptions received in CC are logged before being passed to the FE. Added
1108 code to CC to handle exceptions *not* thrown by the installer itself.
1109
1110 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1111 get_max_mb_for_resize() returns -1 if not self.resizeable
1112
1113 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1114 More dirty rsync hacks :-/
1115
1116 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1117 Patches from chotchki (bug #90325) to improve CC networking. untested.
1118
1119 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1120 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1121 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1122 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1123 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1124 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1125 _get_packages_to_emerge()
1126
1127 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1128 Added group-adding code to set_users in ArchTemplate
1129
1130 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1131 Added post-install script code
1132
1133 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1134 Fixed encapsulation issues in GLIClientController (bug #90141)
1135
1136 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1137 Update resizing code in GLIStorageDevice
1138
1139 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1140 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1141
1142 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1143 Reverted change to ArchTemplate and added support for commented line in old
1144 code.
1145
1146 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1147 Changed _edit_config() to modify value in-place instead of commenting out and
1148 adding the new value to the end of the file.
1149
1150 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1151 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1152 Also updated TODO list.
1153
1154 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1155 Use blackace's one-liner to add comments for all function for use with
1156 pythondoc.
1157
1158 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1159 Moved 'end >= device_sectors' check out of loop to check for next partition's
1160 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1161 Partitioning code now tracks start/end of extended for placing logicals. End
1162 point of logical is now adjusted along with start.
1163
1164 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1165 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1166 the way of partitioning from a blank disk. Add int() around access to minor
1167 key in partition information due to new partition code leaving them as float.
1168
1169 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1170 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1171
1172 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1173 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1174
1175 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1176 Added support for DHCP options and MAC addresses in the InstallProfile.
1177
1178 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1179 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1180 sed to properly strip out junk.
1181
1182 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1183 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1184 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1185
1186 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1187 Fixed indent problem in GLICController
1188
1189 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1190 Check for disklabel type "loop" and use the device name without a minor.
1191
1192 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1193 Remove /tmp/compile_output.log and /var/log/install.log when install is
1194 complete. Added code to (hopefully) keep 2nd thread running after install.
1195 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1196 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1197 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1198
1199 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1200 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1201 when unpacking tarball.
1202
1203 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1204 rewrote filesystem_tools. looks like it works so ripping out all the old
1205 filesystem_tools code.
1206
1207 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1208 Changed the print statements to logging in the partitioning BE code.
1209 the logger may need to be imported to the x86archtemplate. unknown yet.
1210 Added the finishing_cleanup function.
1211 added a fix to the logger from BenUrban
1212
1213 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1214 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1215 URIs. The blank uri check has been commented out.
1216 ripped out error checking of set_services. this is done by _add_to_runlevel.
1217
1218 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1219 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1220
1221 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1222 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1223 the install profile if available. Commented out spawn() debugging prints
1224
1225 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1226 small changes to setup_network_post. moved adding to runlevel of net.x to
1227 after the device gets symlinked. added domainname runlevel command.
1228
1229 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1230 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1231 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1232 spawn() call in livecd-kernel code to pass environment variables.
1233 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1234 the install profile if available.
1235
1236 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1237 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1238 to handle installing the livecd kernel into the new system.
1239
1240 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1241 should emerge hotplug and coldplug before adding them to runlevel.
1242
1243 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1244 took chroot out of grub_install command.
1245
1246 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1247 Changed chroot wrapper code in spawn() to write the wrapper the python way
1248 instead of the bash way to avoid quote conflicts. Added
1249 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1250 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1251 as it breaks the piping.
1252
1253 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1254 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1255
1256 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1257 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1258 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1259 GLIInstallProfile.
1260
1261 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1262 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1263 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1264 into /mnt/gentoo in prepare_chroot()
1265
1266 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1267 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1268 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1269 to start/end sectors
1270
1271 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1272 Add 2>&1 to cmd in spawn()
1273
1274 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1275 Modified GLIUtility.exitsuccess() to work with return value from
1276 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1277 creates wrapper script for commands run inside chroot so multiple commands
1278 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1279 for the generated script from spawn()
1280
1281 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1282 Removed default values for stage tarball URI and portage tree URI from
1283 InstallProfile. These should be set by the FEs. also added services step to
1284 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1285 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1286
1287 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1288 Small fix for setting the default gateway. Also added feature to dialogfe.
1289
1290 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1291 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1292
1293 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1294 Fixed a bunch of true -> True typos. lots of em
1295 only write new resolv.conf if there are dns servers listed.
1296
1297 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 Commented out 'display_on_tty8=True' in start_portmap()
1299
1300 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1301 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1302
1303 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1304 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1305 lang parameter to __init__()
1306
1307 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1308 updates to TODO list.
1309
1310 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1311 Initial code for quickpkg GRP support. Fix loop to grab packages from
1312 'emerge -p blah'
1313
1314 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1315 check for dhcp in the network stuff and emerge it if it is.
1316 added quickpkg to TODO list
1317
1318 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1319 Changed the raising of 'warning' exceptions to a simple log of the error
1320 so that the installer can continue.
1321
1322 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1323 Some big changes. First, changed most output to display_on_tty8.
1324 Second, added log lines to all templates. Some smaller fixes such as typos.
1325 Also did some cleanups of old commented lines.
1326
1327 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1329 Undo change with fix. Escaping fix in GLIStorageDevice.py
1330
1331 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1332 more updates to TODO list. hopefully we'll soon start removing items instead
1333 of adding them.
1334
1335 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1336 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1337
1338 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1339 updated TODO list. (again)
1340
1341 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1342 changed output of portmap start to display_on_tty8.
1343 fixed bootloader for udev and multiple kernels
1344 fixed custom kernel config (again)
1345
1346 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1347 changed default value of CC._enable_ssh to True because this is smart.
1348 added code to allow custom kernel .config. may be unstable and break. sorry.
1349
1350 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1351 partition() now waits until after it checks for partition flags before delete
1352 the partitions :P
1353
1354 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1355 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1356 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1357 blank.
1358
1359 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1360 Various fixes related to the add_users function. Still not yet finished.
1361 Added things to the TODO list. Lets start using that!
1362
1363 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1364 Added code to x86Template to format newly created partitions. Also added
1365 some error checking code. GLIStorageDevice passes 'minor' with data to
1366 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1367 mounting code.
1368
1369 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1370 Took out unnecessary setting of random livecd root password. the cd already
1371 sets it randomly.
1372
1373 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1374 Took out an unneeded step from CC's run()
1375
1376 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1377 Attempt at detecting and adding windows partitions to lilo.
1378
1379 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1380 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1381 partition. fixed misc exit_status => exitstatus typo.
1382
1383 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1384 Added basic code for resizing filesystems with pyparted. Fixed code for
1385 resizing ntfs and ext2/3.
1386
1387 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1388 Fixed partition() in x86Template so that it scans through logicals and deletes
1389 before deleting containing extended partition. Also clears partition table to
1390 be safe before third pass.
1391
1392 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1393 Added mount_network_shares. not able to test it from this computer.
1394 will test when i get back to school.
1395 also added start_portmap to the client_controller as an always-do.
1396 agaffney says this is needed for NFS mounts to work.
1397
1398 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1399 Partial rewrite of partitioning code in x86Template. No longer shells out to
1400 parted to perform actions, now uses all pyparted calls. Code "works" in a
1401 test, but still needs lots of TLC. Also modified tests/install.py to work
1402 with x86Template and GLIClientConfiguration.
1403
1404 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1405 Initial move of partitioning code from ArchTemplate to x86Template.
1406
1407 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1408 Added grp_install and services to InstallProfile. forgot about the set_root_password
1409
1410 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1411 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1412 Test Install ran very well (skipping partitioning).
1413
1414 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1415 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1416 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1417 some may still have eluded me.
1418
1419 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1420 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1421 Just finished mount_local_partitions in GLIArchitectureTemplate
1422
1423 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1424 Added get_num_sectors() to GLIStorageDevice.
1425
1426 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1427 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1428 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1429 from GLIInstallProfile.
1430
1431 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1432 GLIStorageDevice returns "unknown" instead of "" for get_type()
1433
1434 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1435 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1436 actually work. Commented out resizability checking code for speed.
1437
1438 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1439 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1440 GLIStorageDevice at the suggestion of plors
1441
1442 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1443 Added a function to GLIUtility to pull a value from a make.conf-style config
1444 file. Minor type fix to GLIInstallProfile.py
1445
1446 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1447 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1448 network mounts from partition data structure in GLIInstallProfile
1449
1450 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1451 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1452 can be resized.
1453
1454 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1455 Added some of the final functions to GLIInstallTemplate.
1456 Yes this project is still active despite rare use of the Changelog!
1457
1458 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1459 Added the GLIPartitionTools.py file. This is a temporary insertion of
1460 partitioning tools that will eventually go into their own package.
1461
1462 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1463 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1464 for the program). Added __init__(install_profile, client_configuration) to
1465 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1466 to avoid constantly passing stuff every time we call a method.
1467
1468 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1469
1470 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1471 files without messing up all the other stuff in them. This will be used for making
1472 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1473
1474 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1475
1476 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1477 have a few basic things. I added two private methods. One is _depends(). This
1478 will be used for dependency checking (ie. unpacking a tarball requires that
1479 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1480 same syntax as os.system(), however, instead of being run in the liveCD
1481 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1482 isolated the code. Hope to work more this week to get this class formed...
1483
1484 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1485
1486 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1487 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1488 to allow for easier modification (mutable, rather than immutable objects). Updated
1489 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1490 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1491 Added initial unit test code.
1492
1493 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1494
1495 Added initial changelog. Setting up the basic structure of the CVS repository
1496 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1497 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20