/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1305 - (show annotations) (download)
Fri Feb 17 17:47:40 2006 UTC (9 years, 3 months ago) by agaffney
File size: 69311 byte(s)
  src/GLIPortage.py:
  ignore blank packages passed to get_deps() and emerge()

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.599 2006/02/17 17:47:40 agaffney Exp $
5
6 *GLI-0.3 (12 Feb 2006)
7
8 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
9 src/GLIPortage.py:
10 ignore blank packages passed to get_deps() and emerge()
11
12 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
13 src/GLIUtility.py:
14 add get_chosts() function
15
16 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
17 src/templates/x86ArchitectureTemplate.py:
18 pull old start/end sector values from somewhere that actually has them
19 add logic for extended partition to code that makes sure new end sector
20 doesn't overlap start sector of next partitions
21 don't freak out if partition can't be deleted
22
23 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
24 src/GLIPortage.py:
25 run env-update at the end of copy_pkg_to_chroot()
26
27 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
28 src/templates/x86ArchitectureTemplate.py:
29 I'm a complete fscking dumbass. I recorded the end sector for partitions that
30 weren't being touched, but I never used it when recreating them...the end was
31 calculated from the size in MB instead :/
32
33 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
34 src/GLIArchitectureTemplate.py:
35 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
36 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
37 src/GLIPortage.py:
38 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
39 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
40 'resized' flag
41
42 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
43 src/GLIPortage.py:
44 short circuit and check vdb directly if package begins with '='
45
46 8 Feb 2006; Preston Cody <codeman@gentoo.org>
47 added more packages to extra_packages list in IP
48
49 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
50 src/templates/x86ArchitectureTemplate.py:
51 10 tries to create filesystem instead of 3
52 src/GLIPortage, src/GLIArchitectureTemplate.py:
53 ignore_missing flag for copy_pkg_to_chroot()
54
55 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
56 src/GLIPortage.py:
57 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
58
59 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
60 src/net/server/gliserv.py:
61 fix handling of 404 for real files
62 src/net/server/GLIServerProfile.py:
63 look for 'hostname' in attributes instead of 'name'
64
65 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
66 src/SimpleXMLParser.py:
67 initial support for 'include' in XML files
68 src/GLIStorageDevice.py:
69 initial support for %
70 src/GLIClientController.py:
71 add debugging statements to pre-install steps
72
73 15 Jan 2006; Preston Cody <codeman@gentoo.org>
74 webgli/configfiles:
75 check for key in etc_files['rc.conf'] to fix key error
76 webgli/timezone: small fix.
77 webgli/extrapackages: list-type fix
78 webgli/services: same
79 glimd: add/edit_client updates.
80
81 12 Jan 2006; Preston Cody <codeman@gentoo.org>
82 added configure.pyhtml to glimd. minor changes
83 to top and add_client. fixed up showargs.
84 added execute.pyhtml
85 changed register clients line in gliserv for name->hostname.
86 updated TODO.
87
88 10 Jan 2006; Preston Cody <codeman@gentoo.org>
89 src/net/server/*:
90 added add/del/edit client/profile.pythml for glimd.
91 updated templates, showclients, and gliserv.
92
93 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
94 src/net/server/*:
95 stupid threading module...
96
97 8 Jan 2006; Preston Cody <codeman@gentoo.org>
98 AT: rc.conf -> conf.d/clock
99
100 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
101 src/GLIPortage.py:
102 show 'Calculating dependencies for ...' in subprogress bar at beginning of
103 emerge()
104 src/GLIArchitectureTemplate.py:
105 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
106 in the chroot
107 remove _quickpkg_deps() and _portage_best_{visible,version}()
108 src/GLIUtility.py:
109 fail immediately in validate_uri() if provided URI can't be parsed
110 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
111 debug code in spawn()
112 use lower-level os.read() instead of file.read() because python sucks
113 src/templates/x86ArchitectureTemplate.py:
114 basic subprogress reporting for partitioning
115 total_steps was 1 too high
116
117 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
118 src/GLIUtility.py:
119 move parse_vdb_contents() to GLIPortage
120 src/GLIPortage.py:
121 remove all symlink fixups
122 ignore 'dir' entries in CONTENTS
123 call tar with -p
124
125 5 Jan 2006; Preston Cody <codeman@gentoo.org>
126 AT: bootsplash is now gensplash
127 gliserv: add advanced_mode to shared_info
128 webgli: Added advanced mode. mostly just disables a few screens.
129
130 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
131 src/GLIPortage.py:
132 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
133 added emerge()
134 update sub-progress after each package is emerged
135 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
136 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
137 remove link if it exists before moving content into place
138 src/GLIArchitectureTemplate.py:
139 install_packages() now calls emerge() in GLIPortage
140 change all calls to self._emerge() to self._portage.emerge()
141 comment out all emerge status checking...using exceptions now
142 call copy_pkg_to_chroot() directly for livecd-kernel
143
144 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
145 src/GLIArchitectureTemplate.py:
146 remove add_pkg_to_world() and copy_pkg_to_chroot()
147 copy installer.log to installer.log.failed on install failure
148 src/GLIUtility.py:
149 added get_keymaps()
150 spawn() takes any False argument for chroot instead of just None
151 src/GLIPortage.py:
152 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
153 change copy_pkg_to_chroot() to work properly with use_root=False
154 figure PORTAGE_TMPDIR properly
155
156 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
157 src/net/server/html/*:
158 converted showclients, load/saveprofile
159
160 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
161 src/GLIPortage.py:
162 exclude packages already in chroot vdb from binary deplist
163 chroot to use best_version for chroot's vdb
164 src/runtimedeps.py:
165 accept ROOT via commandline instead of env
166
167 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
168 src/runtimedeps.py:
169 remove passing of ROOT
170 src/GLIPortage.py:
171 modify get_deps() to get deptree for each package and merge into final list
172 remove depgraph class
173 add debugging code to get_deps()
174 src/GLIArchitectureTemplate.py:
175 combine code for GRP/compile in install_packages() into one block
176 debugging code in install_packages()
177
178 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
179 src/runtimedeps.py:
180 initial commit
181 src/GLIPortage.py:
182 use separate script for GRP deps
183 remove calls to portage module
184
185 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
186 src/GLIPortage.py:
187 initial commit
188 move some of portage function from GLIAT
189 flipped around a few function args
190 src/GLIArchitectureTemplate.py:
191 revamp install_packages() for new GLIPortage
192
193 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
194 src/GLIArchitectureTemplate.py:
195 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
196
197 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
198 src/net/server/gliserv.py:
199 wrap generated code in a class to isolate it a bit better
200 302 redirects work
201 don't use cgi.escape() for <% %>
202 src/net/server/html/webgli/*:
203 load/save profile
204 src/GLIUtility.py:
205 change /sbin/lspci to just lspci
206
207 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
208 src/GLIClientController.py:
209 change ordering of statements in CC run() while loop to not go past the end
210 of the array
211 src/GLIArchitectureTemplate.py:
212 removed redundant bind mounts
213
214 18 Dec 2005; Preston Cody <codeman@gentoo.org>
215 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
216 added a diagram by blackace from last night.
217 added the glossary in RTF format.
218
219 17 Dec 2005; Preston Cody <codeman@gentoo.org>
220 x86AT: separated out emerge/configure from running of bootloader
221 added MBR drive support to lilo.
222 these changes will likely not work.
223 AT: added setup_and_run_bootloader step.
224
225 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
226 src/net/server/gliserv.py:
227 call generated code in a function
228 src/net/server/html/webgli/*:
229 include top/bottom
230 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
231 src/GLIClientCongifuration.py:
232 install mode magic
233
234 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
235 src/GLIClientController.py:
236 use GLIException when there's an import problem
237 added debug code to show install_steps
238 src/templates/amd64ArchitectureTemplate.py:
239 add . to import path
240 proper path this time: ../../templates
241 src/GLIArchitectureTemplate.py:
242 add _portage_best_version() function
243
244 11 Dec 2005; Preston Cody <codeman@gentoo.org>
245 added initial glossary and gimli diagram to the docs directory.
246 modify gli-dialog to allow editing of the install_profile after loading XML.
247
248 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
249 src/net/server/html/webgli/:
250 converted globaluse, localuse, networkmounts, portagetree, and stageselection
251 moved saveclientconfig stuff into clientconfig
252 moved saveconfigfiles into config files
253 converted etc_portage and makedotconf
254 converted bootloader and kernel
255 convert daemons, extrapackages, networking, review, services, timezone, users
256 src/net/server/gliserv.py:
257 proper 404 handling for .pyhtml extension
258 HTML escape <% %> stuff
259 work around python's sucky regexes
260 src/GLIInstallProfile.py:
261 allow set_{rsync,ftp,http}_proxy() to accept empty values
262
263 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
264 src/net/server/gliserv.py:
265 initial commit of Legolas templating engine
266 302 redirects
267 src/net/server/html/index.html, src/net/server/webgli_template.html:
268 minor changes for new code
269 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
270 initial commit of the conversion from the monolithic WebGLIHandler.py to the
271 one file per path Legolas goodness
272 partitioning[2-4] done
273
274 5 Dec 2005; Preston Cody <codeman@gentoo.org>
275 webgli: dhcp options in CC and post-install.
276 updated comparison chart.
277 webgli: etc/portage/* and distcc support added. not too-well tested.
278
279 4 Dec 2005; Preston Cody <codeman@gentoo.org>
280 webgli_template.html: valign=top on left side.
281 webgli: fix bootloader boot_device. now working.
282 webgli: CC proxy done. post-install proxy in progress.
283
284 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
285 src/net/server/webgli_template.html:
286 increase padding for content cell to 7px and add colspan=2
287
288 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
289 webgli: added graphic bar on top
290 webgli: added hover effects on the links on the left
291 webgli: re-rendered header_bg.png to stretch without artifacts
292
293 3 Dec 2005; Preston Cody <codeman@gentoo.org>
294 webgli: make.conf disabling fixes for dynamic_stage3
295 fixed portage snapshot browse popup
296 all changes tested.
297 webgli: add debug mode to CC screen. the screen still needs lots of work.
298
299 1 Dec 2005; Preston Cody <codeman@gentoo.org>
300 added debug mode question to gli-dialog
301 added CC proxies to CC networking for gli-dialog
302 webgli: fixed skip CC networking if connection active
303 webgli: portage snapshot defaults to CD
304 webgli: bootloader mbr drive selection
305 webgli: USE flags unselectable if dynamic_stage3
306 webgli: manual extra packages and save button.
307
308 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
309 src/GLIUtility.py:
310 change ping count to 2
311 docs/comparison.html
312 initial commit
313
314 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
315 src/templates/x86ArchitectureTemplate.py:
316 fix map() issue with grub code
317 replace kernel_names and initrd_names loops with one-liners
318
319 27 Nov 2005; Preston Cody <codeman@gentoo.org>
320 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
321 initial gli-dialog support for recommended partitioning layout and clear.
322 failure cleanup now an option for gli-dialog.
323 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
324 added comparison list and updated TODO!
325
326 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
327 src/GLIArchitectureTemplate.py:
328 fix to stage1() debug code
329 fix to stage2() debug code
330
331 26 Nov 2005; Preston Cody <codeman@gentoo.org>
332 some more bootloader code fixes. forgot boot_device != mbr_device.
333
334 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
335 src/GLIStorageDevice.py:
336 fix to unallocated space merging when last one is after part 4
337
338 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
339 src/GLIArchitectureTemplate.py:
340 small fix to debugging code in copy_pkg_to_chroot()
341
342 23 Nov 2005; Preston Cody <codeman@gentoo.org>
343 more bugfixes with bootloader code
344 gli-dialog side appears to work
345
346 21 Nov 2005; Preston Cody <codeman@gentoo.org>
347 initial adding of boot_device to backend.
348 initial boot_device support added to gli-dialog.
349 some fixes of my poor coding
350
351 20 Nov 2005; Preston Cody <codeman@gentoo.org>
352 converted gli-dialog to use the install_package_list.
353 gtkfe has already been converted by AllanonJL
354 new way working in gli-dialog now and added to webgli.
355 added set/get_boot_device() to IP
356
357 19 Nov 2005; Preston Cody <codeman@gentoo.org>
358 get_install_package_list added to InstallProfile. This can be used by the FEs
359
360 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
361 src/templates/x86ArchitectureTemplate.py:
362 call ls with '-1 --color=no'
363
364 16 Nov 2005; Preston Cody <codeman@gentoo.org>
365 added warning (#9) to GRP ppl about stage3 tarballs
366
367 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
368 src/GLIArchitectureTemplate.py:
369 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
370 confused
371
372 13 Nov 2005; Preston Cody <codeman@gentoo.org>
373 removed protocols from rc.conf screens
374 finished initial rc.conf and make.conf in webgli
375
376 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
377 src/net/server/gliserv.py:
378 add -h option to usage()
379 show time and request URI in debug mode
380 show client IP in debug mode
381 just use IP instead of trying to do a reverse lookup
382
383 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
384 src/net/server/gliserv.py:
385 'classier' 401 message
386 proper commandline parsing
387 help via -h
388 user/pass can be specificed via commandline option
389
390 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
391 src/net/server/gliserv.py:
392 basic HTTP auth
393
394 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
395 src/net/server/gliserv.py:
396 dynamic module reloading (yipee!)
397 send 'Last-Modified' header for real files
398 respond to HEAD with just headers
399 src/net/server/handlers/WebGLIHandler.py:
400 icons for drives
401
402 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
403 src/net/server/handlers/WebGLIHandler.py:
404 initial 'pretty' partition table display support
405 clicking partition in 'pretty' display works instead of radio buttons
406 radio buttons and pretty display work together
407 META redirect instead of javascript
408 pretty display stretches across entire screen
409 'Recommended layout' and 'Clear drive' functions
410 properly catch exceptions from do_recommended()
411 src/GLIArchitectureTemplate.py:
412 replace preinst, copy, postinst, rm steps with qmerge
413 whoops...that shouldn't have been commented out
414 create image_dir with -p in copy_pkg_to_chroot()
415 more generic of symlink crappiness
416 new copy_pkg_to_chroot() actually works now
417
418 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
419 src/GLIStorageDevice.py:
420 initial generic disk support
421 fixes for add_partition() code
422 src/net/server/handlers/WebGLIHandler.py:
423 added support for creating generic disks
424 add new partition working
425 save and delete partitions
426
427 6 Nov 2005; Preston Cody <codeman@gentoo.org>
428 webgli: Partitioning making progress.
429
430 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
431 src/GLIArchitectureTemplate.py:
432 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
433 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
434 dir) and works around /etc/gconf symlink problem
435
436 5 Nov 2005; Preston Cody <codeman@gentoo.org>
437 webgli: lots of updates. preliminary partitioning. extra packages works.
438
439 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
440 src/net/server/gliserv.py:
441 httpd now supports HTTPS and falls back to HTTP if not available
442 make fallback actually work
443 src/net/server/SecureXMLRPCServer.py:
444 SecureSocketServer is now threaded
445
446 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
447 src/net/client/gliclient.py:
448 try to use HTTPS for XMLRPC first and fallback to HTTP
449 pretend mode
450 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
451 HTTPS XMLRPC goodness from samyron
452 pass name of certificate
453
454 31 Oct 2005; Preston Cody <codeman@gentoo.org>
455 wegli: daemons and services screens done.
456
457 30 Oct 2005; Preston Cody <codeman@gentoo.org>
458 webgli: networking and users screens
459 added return_redirect to handler.py
460 loading and saving install/client profiles works for webgli now
461 Review also done
462
463 *GLI-0.2 (27 Oct 2005)
464
465 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
466 src/templates/x86ArchitectureTemplate.py:
467 properly check for bootloader emerge exist status with exitsuccess()
468 log output of grub install command
469 add --batch --no-floppy to grub command
470 grubinstallstring only gets logged if debug is on
471 src/GLIUtility.py:
472 update progress bar to 100% when process finishes
473
474 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
475 src/GLIClientController.py:
476 added debugging code for the interaction between the 2 threads via Event()
477 src/GLIUtility.py:
478 doubled the buffer size in spawn()
479 bump buffer size up to 16384
480 only report progress in 5% increments
481 src/GLIArchitectureTemplate.py:
482 kernelpkgs.txt support code
483 above disabled because it sucks
484 added add_pkg_to_world()
485
486 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
487 src/GLIArchitectureTemplate.py:
488 use tar | tar to copy files in copy_pkg_to_chroot()
489 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
490
491 23 Oct 2005; Preston Cody <codeman@gentoo.org>
492 DEBUGGING ADDED TO AT. verbose field added to CConfig.
493
494 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
495 src/net/server/gliserv.py:
496 / maps to index.html
497 look for actual files in html/
498 src/net/html:
499 new template
500 src/GLIUtility.py:
501 added parse_vdb_contents()
502 src/GLIArchitectureTemplate.py:
503 added copy_pkg_to_chroot()
504 added debug code to dynamic-stage3
505 switch dynamic-stage3 to new method
506 lots of bug fixes from adding debug code
507
508 22 Oct 2005; Preston Cody <codeman@gentoo.org>
509 webgli initial bootloader support + changed make.conf.
510 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
511
512 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
513 src/GLIUtility.py:
514 horrible tangled mess of code that is tarball unpacking subprogress display
515 add unpack progress to portage snapshot
516 use read() instead of readlines() in spawn()
517 only update progress bar for whole percents
518
519 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
520 src/templates/x86ArchitectureTemplate.py:
521 change call to 'grub' to use GLIUtility.exitsuccess()
522 add definition of 'build_mode' in _configure_lilo()
523 src/misc/updategtkfe, src/misc/updateglid:
524 fix so subshell is called in root shell
525
526 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
527 src/net/server/handlers/WebGLIHandler.py:
528 stage screen launches URI browser in sized window with various properties set
529
530 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
531 src/misc/updategtkfe:
532 updated to actually work
533 remove previous snapshot and extracted dir before downloading
534 src/misc/updateglid:
535 updated to actually work
536 src/templates/x86ArchitectureTemplate.py:
537 fixed bug where grub code was looking for 'root+root+file_name2'
538
539 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
540 src/net/server/handlers/WebGLIHandler.py:
541 URI browser
542 added mirror selection
543 src/GLIUtility.py:
544 ls via ssh strips off ending *
545
546 16 Oct 2005; Preston Cody <codeman@gentoo.org>
547 more updates to webgli. stage selection.
548
549 11 Oct 2005; Preston Cody <codeman@gentoo.org>
550 updated webgli with preliminary Network Mounts support.
551
552 9 Oct 2005; Preston Cody <codeman@gentoo.org>
553 GenDialog: string formatting and yes/no label fixes.
554 added WebGLI template for gliserv.py
555 added WebGLIHandler as well as a definition for it in gliserv.py
556 updates to the webgli files even though they won't be there for long.
557 Utility: remove exception for non-existant grppkgs.txt until the new livecd
558 goes public.
559
560 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
561 src/net/server/gliserv.py:
562 override dict to not be so anal
563 main server now loads separate module to handle requests
564 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
565 split out profile URLs into separate handler function
566 move handlers into subdirectory
567 add Welcome and Clients handlers
568
569 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
570 src/GLIUtility.py:
571 raise exception if password prompt received twice
572
573 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
574 src/GLIUtility.py:
575 removed rot13ify()
576
577 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
578 src/net/server/gliserv.py:
579 allow for param to be passed multiple times in GET
580 no XMLRPC functions return None
581 modify POST request parsing to only create a list if needed
582 fix GET request parsing so the list creation for multiple values works
583 src/net/client/gliclient.py:
584 various typo and type mismatch fixes
585 exit after exception
586
587 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
588 src/net/client/gliclient.py:
589 initial commit
590 pass MAC to XMLRPC functions
591 src/net/server/GLIServerProfile.py:
592 rename GLIClientsProfiles to GLIServerProfile
593
594 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
595 src/net/server/gliserv.py:
596 now handles POST requests
597 move majority of request handling code to common_handler() to reduce code
598 duplication
599 profile loading
600 client reg via XMLRPC goes into SharedInfo()
601 /showclients redesign
602 template fixes
603 allow handler functions to add/change headers
604 save profile
605
606 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
607 src/net/server/GLIClientsProfiles.py:
608 initial commit
609 src/net/server/template.html:
610 initial commit
611 src/net/server/gliserv.py:
612 add template mojo
613
614 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
615 src/net/server/gliserv.py:
616 XMLRPC mojo
617
618 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
619 src/GLIArchitectureTemplate.py:
620 add code in _edit_config() to comment line where variable is defined
621 previously
622 insert new line under previous definition of variable if it exists
623 small _edit_config() cleanup
624 src/GLIStorageDevice.py:
625 add clear_partitions() function
626 new sizes for recommended partition layout
627 automatically calculate swap size for recommended layout
628
629 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
630 src/templates/x86ArchitectureTemplate.py:
631 fat16 mojo
632
633 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
634 src/GLIStorageDevice.py:
635 prevent do_recommended() from being run twice
636 rewrite do_recommended() to be more robust
637 src/GLIArchitectureTemplate.py:
638 rework _edit_config() to not write duplicate entries
639
640 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
641 src/GLIStorageDevice.py:
642 added do_recommended() function to automatically created 256M/1G/* layout
643
644 17 Sep 2005; Preston Cody <codeman@gentoo.org>
645 src/gli-dialog.py: added set_distcc to the list
646 GenDialog: added set_distcc. untested.
647 IP: added install_distcc flag.
648 AT: added install_distcc function based on the flag. runs after build_kernel
649 changed AT spawn command for distcc for nodeps.
650
651 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
652 src/GLIUtility.py:
653 add rot13ify() function
654
655 16 Sep 2005; Preston Cody <codeman@gentoo.org>
656 src/GenDialog.py
657 added a sentence of text. unchecking support added.
658
659 15 Sep 2005; Preston Cody <codeman@gentoo.org>
660 src/GLIUtility.py
661 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
662 src/GenDialog.py
663 still working on extra_packages. transformed the list to new format.
664 added GRP indication to list. untested.
665 TODO lists updated.
666 src/fe/dialog/gli-dialog.py
667 spelling mistook.
668
669 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
670 src/GLIUtility.py:
671 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
672
673 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
674 src/GLIUtility.py:
675 add get_directory_listing_from_uri()
676 add http support to above
677 add ftp support to above
678 add scp support to above
679 src/GLIArchitectureTemplate.py:
680 "0" instead of 0 for key of single-element dict passed to _edit_config()
681
682 5 Sep 2005; Preston Cody <codeman@gentoo.org>
683 value_only -> only_value
684
685 3 Sep 2005; Preston Cody <codeman@gentoo.org>
686 gutted out all of etc_portage structure since it is now all handled by
687 etc_files
688
689 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
690 src/GLIArchitectureTemplate.py:
691 install_packages() sends progress update notifications
692 src/templates/x86ArchitectureTemplate.py:
693 increase sleep to 5s between format tries
694 src/GLIClientController.py:
695 pass 'self' to AT instead of 'self._pretend'
696
697 2 Sep 2005; Preston Cody <codeman@gentoo.org>
698 logger -> logger.log in x86AT
699
700 1 Sep 2005; Preston Cody <codeman@gentoo.org>
701 added set_etc_portage to IP. debugging gli-d's support for it.
702
703 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
704 src/templates/x86ArchitectureTemplate.py:
705 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
706
707 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
708 src/GLIArchitectureTemplate.py:
709 add _portage_best_version() function and rework install_packages() to allow
710 for future X of Y tracking
711 Use best_visible instead of best_version
712 tracked down and fixed missing = causing empty install extra packages
713 use = when emerging also
714 quickpkg hokey pokey
715 run _get_packages_to_emerge() again with -pk
716
717 22 Aug 2005; Preston Cody <codeman@gentoo.org>
718 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
719 the end of install_packages.
720 added updateglid to /src/misc
721 updated all core files with new GPL notice and copyright statement.
722
723 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
724 src/GLIUtility.py:
725 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
726 a snapshot in /mnt/cdrom/snapshots/
727 get_snapshot_from_cd() adds file:// at the beginning
728 change calls to extra package special case functions to 'self.blah'
729
730 21 Aug 2005; Preston Cody <codeman@gentoo.org>
731 src/ArchTemplate: changed "voodoo".
732 changed order of portage sync methods. made a fallback to webrsync if
733 normal emerge sync fails.
734 removed get_sources_from_cd because it is obsolete.
735 add special cases to install_packages. remove fatal exception on package
736 install failure b/c the box will still be bootable.
737 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
738 handled in the FEs.
739 src/GenDialog: added a bunch of code for dealing with x11-based packages.
740 awaiting testing.
741
742 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
743 src/GLIStorageDevice.py:
744 global try/except block around fs resizable detection code
745 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
746 install-failed cleanup function
747
748 18 Aug 2005; Preston Cody <codeman@gentoo.org>
749 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
750
751 16 Aug 2005; Preston Cody <codeman@gentoo.org>
752 GLIGenDialog:
753 add drive choices for loaded configs.
754 force snapshot for dynamic_stage3
755 init the snapshoturi input to the cd snapshot if not already selected.
756 if dynamic_stage3, skip the make.conf step.
757 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
758 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
759
760 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
761 src/GLIArchitectureTemplate.py:
762 manually call MAKEDEV in stage3-dynamic code
763 copy /etc/inittab.old to /etc/inittab in chroot
764 src/GLIUtility.py:
765 add beginning of validate_uri() function
766 add file:/// support to validate_uri()
767 single quotes when setting livecd password
768
769 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
770 src/GLIGenDialog.py:
771 change getmountpoint() to get_mountpoint()
772 src/misc/updategtkfe:
773 committed script to automatically download latest snapshot and run gtkfe
774 src/templates/x86ArchitectureTemplate.py:
775 fix _configure_lilo_add_windows() for IP -> GLISD stuff
776 src/GLIArchitectureTemplate.py:
777 give tmp_minor an initial value in mount_local_partitions so that the value
778 remain from the previous drive
779
780 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
781 src/templates/x86ArchitectureTemplate.py:
782 Fix _configure_lilo() for IP using GLISD stuff
783 src/GLIArchitectureTemplate.py:
784 install_cron_daemon() treats "none" specially
785
786 14 Aug 2005; Preston Cody <codeman@gentoo.org>
787 old patch from Steven Mertens to resolve bug #96642
788 numerous asthetic changes to GenDialog, no real functionality changes though.
789 strings renamed for global use if necessary.
790 fix all three parts of bug 102291
791 disable set_etc_portage until fully-written.
792
793 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
794 src/GLIClientController.py:
795 lower-case http/ftp proxy envvars
796
797 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
798 src/GLIClientController.py:
799 log end of pre_install steps to aid in debugging
800 src/templates/x86ArchitectureTemplate.py:
801 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
802
803 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
804 src/GLIArchitectureTemplate.py
805 check to make sure that the device node we're wait for to exist isn't of
806 type 'free'
807
808 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
809 src/GLIGenDialog.py:
810 convert install_packages to list in set_extra_packages()
811 check return code of checklist() call in "Manual" section
812 *actually* fix the first problem
813
814 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
815 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
816 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
817
818 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
819 src/GLIArchitectureTemplate.py:
820 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
821
822 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
823 Add CDATA support to SimpleXMLParser and add utility functions for it.
824
825 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
826 src/GLIArchitectureTemplate.py:
827 Fix case where vixie-cron is specified as a full package atom, as we still
828 don't want to run 'crontab /etc/crontab' for it.
829
830 *GLI-0.1 (3 Aug 2005)
831
832 30 Jul 2005; Preston Cody <codeman@gentoo.org>
833 add scp to list of is_uri() so GenDialog doesn't complain.
834 fixed livecd-kernel bug in bootloader code.
835 fixed gendialog for dynamic_stage3 instead of "networkless"
836 change bootloader to allow for both initrd and initramfs.
837 fix IP for dynamic_stage3.
838 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
839
840 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
841 Added full scp:// URI support to get_uri() in GLIUtility
842 Remove "networkless" from dynamic stage3 if locic.
843 Remove print statement from scp:// code.
844 Change scp code to check for "assword: " instead of "Password:"
845 Fix post-install network code to create net.eth1+ symlink correctly
846 Check to make sure pkg can be split on / and some debugging code
847 Add 2>dev/null to emerge call in _get_packages_to_emerge()
848 SimpleXMLParser handles True/False/None correctly now
849 Comment out above fix
850 Add partitioning wait-for-device-to-exist code to mount_local_partitions
851
852 28 Jul 2005; Scott Myron <samyron@gentoo.org>
853 Removed a FIXME in the GLIClientConfiguration that is no
854 longer needed.
855
856 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
857 Default to x86 in ClientConfig
858 Typo in build-a-stage3 code.
859 Remove MAKEDEV call in build-a-stage3 postscript.
860
861 26 Jul 2005; Preston Cody <codeman@gentoo.org>
862 Rewrote init of IP for gli-d. Other GenDialog updates.
863 allow network_type to be None in CConfig.
864
865 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
866 Add _dynamic_stage3 option to IP.
867 Add check for that option to dynamic stage3 code in ArchTemplate.
868 Fix code to determine default route in get_eth_info() in GLIUtility.
869 Fix serialization of dns-servers in ClientConfig.
870
871 24 Jul 2005; Preston Cody <codeman@gentoo.org>
872 changed default values of cron/logger in IP.
873 moved GenDialog IP init out to the individual files. gli-dialog's version
874 will change quite a bit.
875
876 22 Jul 2005; Preston Cody <codeman@gentoo.org>
877 added ppcArchTemplate. blank now. working on yaboot.
878 modified ArchTemplate for amd64 and ppc custom kernels.
879 skeleton implementation of _configure_yaboot.
880 small fixes to other templates.
881
882 21 Jul 2005; Preston Cody <codeman@gentoo.org>
883 GenDialog updates. changed comment in IP.
884
885 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
886 src/GLIInstallProfile.py:
887 Fix codeman's screwup of changing the service seperator to ',' in the parser
888 without changing it in the serialization code! Also document this in a
889 comment so you find it easier. Everybody needs to make sure they update
890 their install profiles!
891
892 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
893 src/GLIArchitectureTemplate.py:
894 Fix casting of list to string and concat of None with string, as well as
895 commented prototype of checking that mounting actually worked (found a case
896 where mount can return success, but the mount won't be done).
897
898 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
899 src/templates/x86ArchitectureTemplate.py:
900 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
901 checking for the device, and sleeping 1 second each time.
902
903 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
904 src/templates/x86ArchitectureTemplate.py:
905 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
906 bootloader works again. Also rename _install_{grub,lilo} to
907 _configure_{grub,lilo} since they don't install the loaders anymore
908 themselves.
909
910 7 Jul 2005; Preston Cody <codeman@gentoo.org>
911 fix global USE flags to not include the arch types at the end.
912 updates to GenDialog and gli-d.
913
914 6 Jul 2005; Preston Cody <codeman@gentoo.org>
915 fixing bootloader code for no initrd and initrd->initramfs naming change.
916
917 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
918 Proper comments and parameters to GLIException in install_mta()
919 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
920 Add strip() to list_mirrors(), list_subarch_from_mirror() and
921 list_tarball_from_mirror() to eliminate blank last item.
922
923 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
924 Added stage3 generation code.
925
926 5 Jul 2005; Preston Cody <codeman@gentoo.org>
927 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
928 Mild changes to GenDialog.
929
930 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
931 Remove separate install step configure_rc_conf() since it's handled by
932 update_config_files()
933 Make a copy of newvalues in _edit_config() so quotes aren't added when the
934 function is called twice on the same file.
935
936 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
937 Missing \ in sed in _get_packages_to_emerge()
938 Removed explicit emerging of hotplug and no longer add it to the runlevel.
939 Check in _quickpkg_deps() to ignore blank package names returned from
940 _get_packages_to_emerge()
941
942 28 Jun 2005; Preston Cody <codeman@gentoo.org>
943 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
944 in the dialog.py gauge code.
945
946 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
947 Add code to update_config_files() to go through etc_files and update stuff.
948 Check to see that _etc_files['make.conf'] exists in get_make_conf()
949 Only use float() in partition xml parsing code if type == "free"
950
951 28 Jun 2005; Preston Cody <codeman@gentoo.org>
952 finished almost all internationalization of GenDialog.
953 attempt at fixing rc.conf function. moved 3 generate functions out of
954 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
955 added dialog.py to the fe/dialog directory so it actually gets used.
956
957 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
958 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
959
960 27 Jun 2005; Preston Cody <codeman@gentoo.org>
961 fix extra entry in list_mirrors()
962 beginning internationalization runthrough.
963
964 26 Jun 2005; Preston Cody <codeman@gentoo.org>
965 added dialog.py to /src temporarily until it gets accepted upstream.
966 fix for unused value in form in dialog.py and changed heights.
967 fix GenDialog forms.
968
969 25 Jun 2005; Preston Cody <codeman@gentoo.org>
970 Changed hostname/domainname for new baselayout.
971 Changed _add_to_runlevel errors to logs.
972 Updated TODO list to show status of GenDialog
973 More updates to GenDialog including two checklists that probably won't work.
974 update IP to use comma-separated list instead of space separated for services.
975
976 24 Jun 2005; Preston Cody <codeman@gentoo.org>
977 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
978 GenDialog as it gets closer to completion.
979
980 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
981 Modify get_eth_info() to take a full interface name (eth0 fex). float()
982 instead of int() in add_partition_device_partition() for minor (closes 96804)
983
984 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
985 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
986 instead of 'interfaces[interface][1]' since DHCP uses that field for its
987 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
988
989 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
990 Apply spawn() patch from #96644 (with minor changes). Make sure the return
991 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
992 small error with <pipe>.close() returning None. Fix space vs. tab issue.
993 Fix undefined variable 'output' issue in spawn().
994
995 20 Jun 2005; Preston Cody <codeman@gentoo.org>
996 More updates to GenDialog and gli-d.
997
998 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
999 Modify list_mirrors() to return a list of mirror URL/name pairs.
1000
1001 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1002 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1003 get subarch.
1004
1005 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1006 Backend partitioning will create disklabel is none exists. Installprofile
1007 defaults to "" now instead of "msdos" for disklabel type. Fix for
1008 mount_local_partitions() to remember device along with minor in the
1009 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1010 add else block to log unsupported netmount types to mount_network_shares()
1011
1012 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1013 src/GLIArchitectureTemplate.py:
1014 Refactor kernel_compile common stuff, fix 2.4 build process.
1015 src/fe/cli/clife.py:
1016 Logging system.
1017 src/GLIUtility.py, src/GLIStorageDevice.py:
1018 Add comments about re-writes needed for boxes without sysfs.
1019
1020 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1021 src/GLIArchitectureTemplate.py:
1022 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1023 'make dep' call for custom compile. build_mode support for prepare-only and
1024 none types completed. custom compile function chains shell functions in
1025 spawned script, to allow for catching all errors.
1026
1027 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1028 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1029 and GenDialog. other gendialog updates as well. kernel updates untested.
1030
1031 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1032 src/GLIInstallProfile.py:
1033 Change structure of etc-portage stuff. The serialization was broken before my
1034 last commit, and I am the only person that's ever used it. The new schema is
1035 as follows:
1036 <etc-portage>
1037 <file name="package.mask"/>
1038 <file name="package.unmask">
1039 <entry atom="sys-kernel/openmosix-sources"/>
1040 </file>
1041 <file name="package.use">
1042 <entry atom="sys-libs/db">
1043 -java
1044 </entry>
1045 <entry atom="dev-libs/cyrus-sasl">
1046 -ldap
1047 </entry>
1048 </file>
1049 </etc-portage>
1050
1051
1052 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1053 src/GLIInstallProfile.py:
1054 Add new entry for gli-profile/kernel-build-method item. Add missing
1055 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1056 keys in the same order.
1057
1058 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1059 src/GLIArchitectureTemplate.py:
1060 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1061 was repeatedly appended to make.conf.
1062
1063 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1064 src/GLIArchitectureTemplate.py:
1065 Put some Linux-2.6 specific code under a if statement. Store list of
1066 successfully mounted swap device for using swapoff. Add proper error checking
1067 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1068 'file'. Clean up some redundant code (thanks to pychecker).'
1069
1070 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1071 Fix typos: get_extended() instead of get_extended_partition(). Added
1072 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1073 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1074
1075 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1076 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1077 in add_network_interface.
1078
1079 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1080 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1081 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1082 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1083 prepare_chroot.
1084
1085 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1086 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1087 +src/fe/installer-gtk:
1088 Add new automated CLI frontend. Add scripts that are the intended means to
1089 use each frontend.
1090
1091 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1092 src/GLIClientController.py:
1093 Add null type to network config, for cases where the interface is already up
1094 and should not be touched (netboot for example).
1095
1096 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1097 src/GLIArchitectureTemplate.py:
1098 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1099 string!. Try to use binary packages if available by default.
1100
1101 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1102 src/GLIArchitectureTemplate.py:
1103 More error checking for _add_to_runlevel, to ensure that the init script
1104 actually exists before we try to add it. set_services phase must take place
1105 after the package installation, otherwise the init scripts might not exist.
1106 Find the correct init script for the cron and logging daemons, and add that
1107 instead of the package atom.
1108
1109 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1110 src/GLIArchitectureTemplate.py:
1111 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1112 usage of 'file' to 'contents' for the variable name, as it shadows
1113 __builtin__.file.
1114
1115 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1116 src/GLIArchitectureTemplate.py:
1117 Add MTA install code, and include MTA install phase. Ensure
1118 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1119 for 'none' kernel config for build_kernel phase. Put kernel_script in
1120 /var/tmp instead of /root for build_kernel phase.
1121
1122 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1123 Rename mta variables to match syslog/cron variables.
1124
1125 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1126 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1127 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1128 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1129 src/templates/.cvsignore, src/tests/.cvsignore:
1130 Refactor partition formatting again to include error checking. Allow 'none'
1131 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1132
1133 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1134 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1135 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1136 only have a single spawn call.
1137
1138 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1139 refixed samyron's fix of set_architecture_template.
1140
1141 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1142 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1143 be executable.
1144
1145 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1146 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1147 error checking when you call set_architecture_template.
1148
1149 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1150 moved the mkfsopts input to the partition options menu instead of the during
1151 the creation process. updated GenDialog to say it supports reiserfs v3.
1152
1153 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1154 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1155 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1156 Add support for other partition types to dialogfe.
1157 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1158 avoid integer overflows and wraparounds.
1159
1160 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1161 Removed start/end from XML output and added mkfsopts to partitioning info.
1162 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1163 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1164 in GLIClientConfiguration. Change from .1 and .9 to constants for
1165 partitioning. Fix free space overwriting bug. Remove a few unused functions
1166 from rewrite. Fix call to get_partition_at()
1167
1168 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1169 Updates to GenDialog and dialogfe.
1170
1171 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1172 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1173
1174 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1175 more GenDialog updates to partitioning.
1176
1177 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1178 Indenting issue in GLISD/get_ordered_partition_list.
1179 updates to GenDialog partitioning and added default UTC for timezone in IP.
1180
1181 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1182 Added GLISD.get_model()
1183
1184 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1185 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1186 More updates to GenDialog :)
1187
1188 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1189 Added get_interface_realname() function.
1190
1191 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1192 Added auto-save of CConfig and copying to new /root after install.
1193 yet even more GenDialog updates.
1194
1195 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1196 removed print statement from GLISD. more updates to GenDialog.
1197
1198 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1199 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1200 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1201 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1202 places in GLIClientConfiguration.
1203
1204 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1205 Fix mount_local_partitions(), configure_fstab(), and
1206 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1207 A few more fixes for templates/x86Archtemplate
1208
1209 27 May 2005; Preston Cody <codeman@gentoo.org>
1210 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1211 a work in progress.
1212
1213 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1214 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1215 directly. GLISD can now handle data imported from XML.
1216
1217 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1218 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1219 handle blank (no disklabel) disks.
1220
1221 20 May 2005; Preston Cody <codeman@gentoo.org>
1222 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1223 up, documented, and separated out serialization and grouped all sections.
1224
1225 19 May 2005; Preston Cody <codeman@gentoo.org>
1226 Reorganization of ClientConfiguration and gutting of unused functions.
1227 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1228
1229 18 May 2005; Preston Cody <codeman@gentoo.org>
1230 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1231
1232 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1233 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1234 partitioning. CC serializes install profile to disk and prepare_chroot()
1235 copies it into /mnt/gentoo/root
1236
1237 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 Moved URI parsing into new function parse_uri()
1239
1240 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1241 Added XMLParser module.
1242
1243 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1244 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1245 Minor fix to is_uri() regex to allow hyphens in hostname.
1246
1247 12 May 2005; Preston Cody <codeman@gentoo.org>
1248 Updated finishing_cleanup for new unmounting method from agaffney.
1249
1250 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1251 Fix GLILogger to use correct time format string. Fix _edit_config() to
1252 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1253 unicode support to is_realstring().
1254
1255 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1256 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1257 return value instead of non-zero. Add code to output a traceback to the
1258 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1259 instead of --nocolor.
1260
1261 10 May 2005; Preston Cody <codeman@gentoo.org>
1262 Added GLIGenDialog.py to make a generic class for the dialog functions that
1263 can be used by both dialogfe and the netfe/be. updated both for new filename.
1264 date changes. 2004->2005.
1265
1266 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1267 Removed 'quiet=True' from spawn() calls
1268
1269 10 May 2005; Preston Cody <codeman@gentoo.org>
1270 Updated GLIUtility with patches from chotchki. Also added documentation
1271
1272 9 May 2005; Preston Cody <codeman@gentoo.org>
1273 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1274 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1275 from bug #89683, mostly touchups.
1276
1277 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1278 GLIStorageDevice cleanup patch from bug #91761
1279
1280 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1281 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1282 _edit_config(). Error logging casts 'error' to str
1283
1284 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1285 Exceptions received in CC are logged before being passed to the FE. Added
1286 code to CC to handle exceptions *not* thrown by the installer itself.
1287
1288 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1289 get_max_mb_for_resize() returns -1 if not self.resizeable
1290
1291 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1292 More dirty rsync hacks :-/
1293
1294 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1295 Patches from chotchki (bug #90325) to improve CC networking. untested.
1296
1297 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1298 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1299 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1300 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1301 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1302 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1303 _get_packages_to_emerge()
1304
1305 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1306 Added group-adding code to set_users in ArchTemplate
1307
1308 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1309 Added post-install script code
1310
1311 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1312 Fixed encapsulation issues in GLIClientController (bug #90141)
1313
1314 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1315 Update resizing code in GLIStorageDevice
1316
1317 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1318 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1319
1320 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1321 Reverted change to ArchTemplate and added support for commented line in old
1322 code.
1323
1324 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1325 Changed _edit_config() to modify value in-place instead of commenting out and
1326 adding the new value to the end of the file.
1327
1328 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1329 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1330 Also updated TODO list.
1331
1332 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1333 Use blackace's one-liner to add comments for all function for use with
1334 pythondoc.
1335
1336 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1337 Moved 'end >= device_sectors' check out of loop to check for next partition's
1338 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1339 Partitioning code now tracks start/end of extended for placing logicals. End
1340 point of logical is now adjusted along with start.
1341
1342 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1343 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1344 the way of partitioning from a blank disk. Add int() around access to minor
1345 key in partition information due to new partition code leaving them as float.
1346
1347 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1348 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1349
1350 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1351 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1352
1353 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1354 Added support for DHCP options and MAC addresses in the InstallProfile.
1355
1356 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1357 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1358 sed to properly strip out junk.
1359
1360 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1361 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1362 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1363
1364 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1365 Fixed indent problem in GLICController
1366
1367 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1368 Check for disklabel type "loop" and use the device name without a minor.
1369
1370 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1371 Remove /tmp/compile_output.log and /var/log/install.log when install is
1372 complete. Added code to (hopefully) keep 2nd thread running after install.
1373 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1374 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1375 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1376
1377 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1378 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1379 when unpacking tarball.
1380
1381 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1382 rewrote filesystem_tools. looks like it works so ripping out all the old
1383 filesystem_tools code.
1384
1385 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1386 Changed the print statements to logging in the partitioning BE code.
1387 the logger may need to be imported to the x86archtemplate. unknown yet.
1388 Added the finishing_cleanup function.
1389 added a fix to the logger from BenUrban
1390
1391 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1392 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1393 URIs. The blank uri check has been commented out.
1394 ripped out error checking of set_services. this is done by _add_to_runlevel.
1395
1396 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1397 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1398
1399 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1400 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1401 the install profile if available. Commented out spawn() debugging prints
1402
1403 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1404 small changes to setup_network_post. moved adding to runlevel of net.x to
1405 after the device gets symlinked. added domainname runlevel command.
1406
1407 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1408 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1409 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1410 spawn() call in livecd-kernel code to pass environment variables.
1411 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1412 the install profile if available.
1413
1414 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1415 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1416 to handle installing the livecd kernel into the new system.
1417
1418 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1419 should emerge hotplug and coldplug before adding them to runlevel.
1420
1421 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1422 took chroot out of grub_install command.
1423
1424 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1425 Changed chroot wrapper code in spawn() to write the wrapper the python way
1426 instead of the bash way to avoid quote conflicts. Added
1427 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1428 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1429 as it breaks the piping.
1430
1431 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1432 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1433
1434 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1435 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1436 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1437 GLIInstallProfile.
1438
1439 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1440 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1441 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1442 into /mnt/gentoo in prepare_chroot()
1443
1444 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1445 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1446 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1447 to start/end sectors
1448
1449 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1450 Add 2>&1 to cmd in spawn()
1451
1452 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1453 Modified GLIUtility.exitsuccess() to work with return value from
1454 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1455 creates wrapper script for commands run inside chroot so multiple commands
1456 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1457 for the generated script from spawn()
1458
1459 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1460 Removed default values for stage tarball URI and portage tree URI from
1461 InstallProfile. These should be set by the FEs. also added services step to
1462 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1463 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1464
1465 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1466 Small fix for setting the default gateway. Also added feature to dialogfe.
1467
1468 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1469 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1470
1471 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1472 Fixed a bunch of true -> True typos. lots of em
1473 only write new resolv.conf if there are dns servers listed.
1474
1475 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1476 Commented out 'display_on_tty8=True' in start_portmap()
1477
1478 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1479 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1480
1481 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1482 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1483 lang parameter to __init__()
1484
1485 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1486 updates to TODO list.
1487
1488 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1489 Initial code for quickpkg GRP support. Fix loop to grab packages from
1490 'emerge -p blah'
1491
1492 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1493 check for dhcp in the network stuff and emerge it if it is.
1494 added quickpkg to TODO list
1495
1496 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1497 Changed the raising of 'warning' exceptions to a simple log of the error
1498 so that the installer can continue.
1499
1500 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1501 Some big changes. First, changed most output to display_on_tty8.
1502 Second, added log lines to all templates. Some smaller fixes such as typos.
1503 Also did some cleanups of old commented lines.
1504
1505 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1506 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1507 Undo change with fix. Escaping fix in GLIStorageDevice.py
1508
1509 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1510 more updates to TODO list. hopefully we'll soon start removing items instead
1511 of adding them.
1512
1513 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1514 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1515
1516 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1517 updated TODO list. (again)
1518
1519 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1520 changed output of portmap start to display_on_tty8.
1521 fixed bootloader for udev and multiple kernels
1522 fixed custom kernel config (again)
1523
1524 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1525 changed default value of CC._enable_ssh to True because this is smart.
1526 added code to allow custom kernel .config. may be unstable and break. sorry.
1527
1528 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1529 partition() now waits until after it checks for partition flags before delete
1530 the partitions :P
1531
1532 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1533 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1534 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1535 blank.
1536
1537 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1538 Various fixes related to the add_users function. Still not yet finished.
1539 Added things to the TODO list. Lets start using that!
1540
1541 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1542 Added code to x86Template to format newly created partitions. Also added
1543 some error checking code. GLIStorageDevice passes 'minor' with data to
1544 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1545 mounting code.
1546
1547 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1548 Took out unnecessary setting of random livecd root password. the cd already
1549 sets it randomly.
1550
1551 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1552 Took out an unneeded step from CC's run()
1553
1554 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1555 Attempt at detecting and adding windows partitions to lilo.
1556
1557 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1558 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1559 partition. fixed misc exit_status => exitstatus typo.
1560
1561 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1562 Added basic code for resizing filesystems with pyparted. Fixed code for
1563 resizing ntfs and ext2/3.
1564
1565 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1566 Fixed partition() in x86Template so that it scans through logicals and deletes
1567 before deleting containing extended partition. Also clears partition table to
1568 be safe before third pass.
1569
1570 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1571 Added mount_network_shares. not able to test it from this computer.
1572 will test when i get back to school.
1573 also added start_portmap to the client_controller as an always-do.
1574 agaffney says this is needed for NFS mounts to work.
1575
1576 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1577 Partial rewrite of partitioning code in x86Template. No longer shells out to
1578 parted to perform actions, now uses all pyparted calls. Code "works" in a
1579 test, but still needs lots of TLC. Also modified tests/install.py to work
1580 with x86Template and GLIClientConfiguration.
1581
1582 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1583 Initial move of partitioning code from ArchTemplate to x86Template.
1584
1585 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1586 Added grp_install and services to InstallProfile. forgot about the set_root_password
1587
1588 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1589 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1590 Test Install ran very well (skipping partitioning).
1591
1592 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1593 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1594 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1595 some may still have eluded me.
1596
1597 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1598 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1599 Just finished mount_local_partitions in GLIArchitectureTemplate
1600
1601 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1602 Added get_num_sectors() to GLIStorageDevice.
1603
1604 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1605 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1606 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1607 from GLIInstallProfile.
1608
1609 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1610 GLIStorageDevice returns "unknown" instead of "" for get_type()
1611
1612 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1613 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1614 actually work. Commented out resizability checking code for speed.
1615
1616 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1617 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1618 GLIStorageDevice at the suggestion of plors
1619
1620 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1621 Added a function to GLIUtility to pull a value from a make.conf-style config
1622 file. Minor type fix to GLIInstallProfile.py
1623
1624 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1625 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1626 network mounts from partition data structure in GLIInstallProfile
1627
1628 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1629 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1630 can be resized.
1631
1632 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1633 Added some of the final functions to GLIInstallTemplate.
1634 Yes this project is still active despite rare use of the Changelog!
1635
1636 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1637 Added the GLIPartitionTools.py file. This is a temporary insertion of
1638 partitioning tools that will eventually go into their own package.
1639
1640 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1641 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1642 for the program). Added __init__(install_profile, client_configuration) to
1643 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1644 to avoid constantly passing stuff every time we call a method.
1645
1646 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1647
1648 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1649 files without messing up all the other stuff in them. This will be used for making
1650 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1651
1652 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1653
1654 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1655 have a few basic things. I added two private methods. One is _depends(). This
1656 will be used for dependency checking (ie. unpacking a tarball requires that
1657 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1658 same syntax as os.system(), however, instead of being run in the liveCD
1659 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1660 isolated the code. Hope to work more this week to get this class formed...
1661
1662 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1663
1664 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1665 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1666 to allow for easier modification (mutable, rather than immutable objects). Updated
1667 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1668 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1669 Added initial unit test code.
1670
1671 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1672
1673 Added initial changelog. Setting up the basic structure of the CVS repository
1674 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1675 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20