/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1331 - (show annotations) (download)
Sat Mar 4 00:01:56 2006 UTC (9 years, 6 months ago) by agaffney
File size: 70609 byte(s)
  src/GLIClientController.py:
  slightly better error handling for pre-install failures

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.609 2006/03/04 00:01:55 agaffney Exp $
5
6 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
7 src/GLIClientController.py:
8 slightly better error handling for pre-install failures
9
10 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
11 src/templates/x86ArchitectureTemplate.py:
12 proper return code checking for ext2/3 resizing
13
14 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
15 src/GLIClientController.py:
16 accept 'none' as well as 'null' for network type
17 src/GLIArchitectureTemplate.py:
18 ignore extended partitions in mount_local_partitions()
19 src/templates/x86ArchitectureTemplate.py:
20 use get_ordered_partition_list() instead of keys().sort() for new_part_list
21 check to make sure start sector for primary isn't less than end sector for
22 previous extended
23 src/GLIClientController.py:
24 write dns servers to /etc/resolv.conf
25
26 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
27 src/GLIPortage.py:
28 copy_pkg_to_chroot() uses compile_output.log for command output
29
30 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
31 only keep a 1000 line 'scrollback' buffer for the compile output and log file
32
33 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
34 src/GLIPortage.py:
35 add code make GLIPortage.py capable of being run stand-along for dynamic
36 stage3 generation and copying packages in a GRP-ish way
37 grp code fixups
38
39 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
40 src/GLIPortage.py:
41 ignore blank packages passed to get_deps() and emerge()
42
43 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
44 src/GLIUtility.py:
45 add get_chosts() function
46
47 *GLI-0.3 (12 Feb 2006)
48
49 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
50 src/templates/x86ArchitectureTemplate.py:
51 pull old start/end sector values from somewhere that actually has them
52 add logic for extended partition to code that makes sure new end sector
53 doesn't overlap start sector of next partitions
54 don't freak out if partition can't be deleted
55
56 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
57 src/GLIPortage.py:
58 run env-update at the end of copy_pkg_to_chroot()
59
60 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
61 src/templates/x86ArchitectureTemplate.py:
62 I'm a complete fscking dumbass. I recorded the end sector for partitions that
63 weren't being touched, but I never used it when recreating them...the end was
64 calculated from the size in MB instead :/
65
66 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
67 src/GLIArchitectureTemplate.py:
68 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
69 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
70 src/GLIPortage.py:
71 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
72 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
73 'resized' flag
74
75 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
76 src/GLIPortage.py:
77 short circuit and check vdb directly if package begins with '='
78
79 8 Feb 2006; Preston Cody <codeman@gentoo.org>
80 added more packages to extra_packages list in IP
81
82 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
83 src/templates/x86ArchitectureTemplate.py:
84 10 tries to create filesystem instead of 3
85 src/GLIPortage, src/GLIArchitectureTemplate.py:
86 ignore_missing flag for copy_pkg_to_chroot()
87
88 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
89 src/GLIPortage.py:
90 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
91
92 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
93 src/net/server/gliserv.py:
94 fix handling of 404 for real files
95 src/net/server/GLIServerProfile.py:
96 look for 'hostname' in attributes instead of 'name'
97
98 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
99 src/SimpleXMLParser.py:
100 initial support for 'include' in XML files
101 src/GLIStorageDevice.py:
102 initial support for %
103 src/GLIClientController.py:
104 add debugging statements to pre-install steps
105
106 15 Jan 2006; Preston Cody <codeman@gentoo.org>
107 webgli/configfiles:
108 check for key in etc_files['rc.conf'] to fix key error
109 webgli/timezone: small fix.
110 webgli/extrapackages: list-type fix
111 webgli/services: same
112 glimd: add/edit_client updates.
113
114 12 Jan 2006; Preston Cody <codeman@gentoo.org>
115 added configure.pyhtml to glimd. minor changes
116 to top and add_client. fixed up showargs.
117 added execute.pyhtml
118 changed register clients line in gliserv for name->hostname.
119 updated TODO.
120
121 10 Jan 2006; Preston Cody <codeman@gentoo.org>
122 src/net/server/*:
123 added add/del/edit client/profile.pythml for glimd.
124 updated templates, showclients, and gliserv.
125
126 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
127 src/net/server/*:
128 stupid threading module...
129
130 8 Jan 2006; Preston Cody <codeman@gentoo.org>
131 AT: rc.conf -> conf.d/clock
132
133 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
134 src/GLIPortage.py:
135 show 'Calculating dependencies for ...' in subprogress bar at beginning of
136 emerge()
137 src/GLIArchitectureTemplate.py:
138 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
139 in the chroot
140 remove _quickpkg_deps() and _portage_best_{visible,version}()
141 src/GLIUtility.py:
142 fail immediately in validate_uri() if provided URI can't be parsed
143 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
144 debug code in spawn()
145 use lower-level os.read() instead of file.read() because python sucks
146 src/templates/x86ArchitectureTemplate.py:
147 basic subprogress reporting for partitioning
148 total_steps was 1 too high
149
150 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
151 src/GLIUtility.py:
152 move parse_vdb_contents() to GLIPortage
153 src/GLIPortage.py:
154 remove all symlink fixups
155 ignore 'dir' entries in CONTENTS
156 call tar with -p
157
158 5 Jan 2006; Preston Cody <codeman@gentoo.org>
159 AT: bootsplash is now gensplash
160 gliserv: add advanced_mode to shared_info
161 webgli: Added advanced mode. mostly just disables a few screens.
162
163 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
164 src/GLIPortage.py:
165 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
166 added emerge()
167 update sub-progress after each package is emerged
168 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
169 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
170 remove link if it exists before moving content into place
171 src/GLIArchitectureTemplate.py:
172 install_packages() now calls emerge() in GLIPortage
173 change all calls to self._emerge() to self._portage.emerge()
174 comment out all emerge status checking...using exceptions now
175 call copy_pkg_to_chroot() directly for livecd-kernel
176
177 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
178 src/GLIArchitectureTemplate.py:
179 remove add_pkg_to_world() and copy_pkg_to_chroot()
180 copy installer.log to installer.log.failed on install failure
181 src/GLIUtility.py:
182 added get_keymaps()
183 spawn() takes any False argument for chroot instead of just None
184 src/GLIPortage.py:
185 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
186 change copy_pkg_to_chroot() to work properly with use_root=False
187 figure PORTAGE_TMPDIR properly
188
189 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
190 src/net/server/html/*:
191 converted showclients, load/saveprofile
192
193 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
194 src/GLIPortage.py:
195 exclude packages already in chroot vdb from binary deplist
196 chroot to use best_version for chroot's vdb
197 src/runtimedeps.py:
198 accept ROOT via commandline instead of env
199
200 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
201 src/runtimedeps.py:
202 remove passing of ROOT
203 src/GLIPortage.py:
204 modify get_deps() to get deptree for each package and merge into final list
205 remove depgraph class
206 add debugging code to get_deps()
207 src/GLIArchitectureTemplate.py:
208 combine code for GRP/compile in install_packages() into one block
209 debugging code in install_packages()
210
211 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
212 src/runtimedeps.py:
213 initial commit
214 src/GLIPortage.py:
215 use separate script for GRP deps
216 remove calls to portage module
217
218 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
219 src/GLIPortage.py:
220 initial commit
221 move some of portage function from GLIAT
222 flipped around a few function args
223 src/GLIArchitectureTemplate.py:
224 revamp install_packages() for new GLIPortage
225
226 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
227 src/GLIArchitectureTemplate.py:
228 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
229
230 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
231 src/net/server/gliserv.py:
232 wrap generated code in a class to isolate it a bit better
233 302 redirects work
234 don't use cgi.escape() for <% %>
235 src/net/server/html/webgli/*:
236 load/save profile
237 src/GLIUtility.py:
238 change /sbin/lspci to just lspci
239
240 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
241 src/GLIClientController.py:
242 change ordering of statements in CC run() while loop to not go past the end
243 of the array
244 src/GLIArchitectureTemplate.py:
245 removed redundant bind mounts
246
247 18 Dec 2005; Preston Cody <codeman@gentoo.org>
248 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
249 added a diagram by blackace from last night.
250 added the glossary in RTF format.
251
252 17 Dec 2005; Preston Cody <codeman@gentoo.org>
253 x86AT: separated out emerge/configure from running of bootloader
254 added MBR drive support to lilo.
255 these changes will likely not work.
256 AT: added setup_and_run_bootloader step.
257
258 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
259 src/net/server/gliserv.py:
260 call generated code in a function
261 src/net/server/html/webgli/*:
262 include top/bottom
263 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
264 src/GLIClientCongifuration.py:
265 install mode magic
266
267 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
268 src/GLIClientController.py:
269 use GLIException when there's an import problem
270 added debug code to show install_steps
271 src/templates/amd64ArchitectureTemplate.py:
272 add . to import path
273 proper path this time: ../../templates
274 src/GLIArchitectureTemplate.py:
275 add _portage_best_version() function
276
277 11 Dec 2005; Preston Cody <codeman@gentoo.org>
278 added initial glossary and gimli diagram to the docs directory.
279 modify gli-dialog to allow editing of the install_profile after loading XML.
280
281 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
282 src/net/server/html/webgli/:
283 converted globaluse, localuse, networkmounts, portagetree, and stageselection
284 moved saveclientconfig stuff into clientconfig
285 moved saveconfigfiles into config files
286 converted etc_portage and makedotconf
287 converted bootloader and kernel
288 convert daemons, extrapackages, networking, review, services, timezone, users
289 src/net/server/gliserv.py:
290 proper 404 handling for .pyhtml extension
291 HTML escape <% %> stuff
292 work around python's sucky regexes
293 src/GLIInstallProfile.py:
294 allow set_{rsync,ftp,http}_proxy() to accept empty values
295
296 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
297 src/net/server/gliserv.py:
298 initial commit of Legolas templating engine
299 302 redirects
300 src/net/server/html/index.html, src/net/server/webgli_template.html:
301 minor changes for new code
302 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
303 initial commit of the conversion from the monolithic WebGLIHandler.py to the
304 one file per path Legolas goodness
305 partitioning[2-4] done
306
307 5 Dec 2005; Preston Cody <codeman@gentoo.org>
308 webgli: dhcp options in CC and post-install.
309 updated comparison chart.
310 webgli: etc/portage/* and distcc support added. not too-well tested.
311
312 4 Dec 2005; Preston Cody <codeman@gentoo.org>
313 webgli_template.html: valign=top on left side.
314 webgli: fix bootloader boot_device. now working.
315 webgli: CC proxy done. post-install proxy in progress.
316
317 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
318 src/net/server/webgli_template.html:
319 increase padding for content cell to 7px and add colspan=2
320
321 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
322 webgli: added graphic bar on top
323 webgli: added hover effects on the links on the left
324 webgli: re-rendered header_bg.png to stretch without artifacts
325
326 3 Dec 2005; Preston Cody <codeman@gentoo.org>
327 webgli: make.conf disabling fixes for dynamic_stage3
328 fixed portage snapshot browse popup
329 all changes tested.
330 webgli: add debug mode to CC screen. the screen still needs lots of work.
331
332 1 Dec 2005; Preston Cody <codeman@gentoo.org>
333 added debug mode question to gli-dialog
334 added CC proxies to CC networking for gli-dialog
335 webgli: fixed skip CC networking if connection active
336 webgli: portage snapshot defaults to CD
337 webgli: bootloader mbr drive selection
338 webgli: USE flags unselectable if dynamic_stage3
339 webgli: manual extra packages and save button.
340
341 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
342 src/GLIUtility.py:
343 change ping count to 2
344 docs/comparison.html
345 initial commit
346
347 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
348 src/templates/x86ArchitectureTemplate.py:
349 fix map() issue with grub code
350 replace kernel_names and initrd_names loops with one-liners
351
352 27 Nov 2005; Preston Cody <codeman@gentoo.org>
353 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
354 initial gli-dialog support for recommended partitioning layout and clear.
355 failure cleanup now an option for gli-dialog.
356 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
357 added comparison list and updated TODO!
358
359 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
360 src/GLIArchitectureTemplate.py:
361 fix to stage1() debug code
362 fix to stage2() debug code
363
364 26 Nov 2005; Preston Cody <codeman@gentoo.org>
365 some more bootloader code fixes. forgot boot_device != mbr_device.
366
367 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
368 src/GLIStorageDevice.py:
369 fix to unallocated space merging when last one is after part 4
370
371 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
372 src/GLIArchitectureTemplate.py:
373 small fix to debugging code in copy_pkg_to_chroot()
374
375 23 Nov 2005; Preston Cody <codeman@gentoo.org>
376 more bugfixes with bootloader code
377 gli-dialog side appears to work
378
379 21 Nov 2005; Preston Cody <codeman@gentoo.org>
380 initial adding of boot_device to backend.
381 initial boot_device support added to gli-dialog.
382 some fixes of my poor coding
383
384 20 Nov 2005; Preston Cody <codeman@gentoo.org>
385 converted gli-dialog to use the install_package_list.
386 gtkfe has already been converted by AllanonJL
387 new way working in gli-dialog now and added to webgli.
388 added set/get_boot_device() to IP
389
390 19 Nov 2005; Preston Cody <codeman@gentoo.org>
391 get_install_package_list added to InstallProfile. This can be used by the FEs
392
393 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
394 src/templates/x86ArchitectureTemplate.py:
395 call ls with '-1 --color=no'
396
397 16 Nov 2005; Preston Cody <codeman@gentoo.org>
398 added warning (#9) to GRP ppl about stage3 tarballs
399
400 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
401 src/GLIArchitectureTemplate.py:
402 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
403 confused
404
405 13 Nov 2005; Preston Cody <codeman@gentoo.org>
406 removed protocols from rc.conf screens
407 finished initial rc.conf and make.conf in webgli
408
409 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
410 src/net/server/gliserv.py:
411 add -h option to usage()
412 show time and request URI in debug mode
413 show client IP in debug mode
414 just use IP instead of trying to do a reverse lookup
415
416 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
417 src/net/server/gliserv.py:
418 'classier' 401 message
419 proper commandline parsing
420 help via -h
421 user/pass can be specificed via commandline option
422
423 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
424 src/net/server/gliserv.py:
425 basic HTTP auth
426
427 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
428 src/net/server/gliserv.py:
429 dynamic module reloading (yipee!)
430 send 'Last-Modified' header for real files
431 respond to HEAD with just headers
432 src/net/server/handlers/WebGLIHandler.py:
433 icons for drives
434
435 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
436 src/net/server/handlers/WebGLIHandler.py:
437 initial 'pretty' partition table display support
438 clicking partition in 'pretty' display works instead of radio buttons
439 radio buttons and pretty display work together
440 META redirect instead of javascript
441 pretty display stretches across entire screen
442 'Recommended layout' and 'Clear drive' functions
443 properly catch exceptions from do_recommended()
444 src/GLIArchitectureTemplate.py:
445 replace preinst, copy, postinst, rm steps with qmerge
446 whoops...that shouldn't have been commented out
447 create image_dir with -p in copy_pkg_to_chroot()
448 more generic of symlink crappiness
449 new copy_pkg_to_chroot() actually works now
450
451 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
452 src/GLIStorageDevice.py:
453 initial generic disk support
454 fixes for add_partition() code
455 src/net/server/handlers/WebGLIHandler.py:
456 added support for creating generic disks
457 add new partition working
458 save and delete partitions
459
460 6 Nov 2005; Preston Cody <codeman@gentoo.org>
461 webgli: Partitioning making progress.
462
463 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
464 src/GLIArchitectureTemplate.py:
465 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
466 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
467 dir) and works around /etc/gconf symlink problem
468
469 5 Nov 2005; Preston Cody <codeman@gentoo.org>
470 webgli: lots of updates. preliminary partitioning. extra packages works.
471
472 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
473 src/net/server/gliserv.py:
474 httpd now supports HTTPS and falls back to HTTP if not available
475 make fallback actually work
476 src/net/server/SecureXMLRPCServer.py:
477 SecureSocketServer is now threaded
478
479 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
480 src/net/client/gliclient.py:
481 try to use HTTPS for XMLRPC first and fallback to HTTP
482 pretend mode
483 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
484 HTTPS XMLRPC goodness from samyron
485 pass name of certificate
486
487 31 Oct 2005; Preston Cody <codeman@gentoo.org>
488 wegli: daemons and services screens done.
489
490 30 Oct 2005; Preston Cody <codeman@gentoo.org>
491 webgli: networking and users screens
492 added return_redirect to handler.py
493 loading and saving install/client profiles works for webgli now
494 Review also done
495
496 *GLI-0.2 (27 Oct 2005)
497
498 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
499 src/templates/x86ArchitectureTemplate.py:
500 properly check for bootloader emerge exist status with exitsuccess()
501 log output of grub install command
502 add --batch --no-floppy to grub command
503 grubinstallstring only gets logged if debug is on
504 src/GLIUtility.py:
505 update progress bar to 100% when process finishes
506
507 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
508 src/GLIClientController.py:
509 added debugging code for the interaction between the 2 threads via Event()
510 src/GLIUtility.py:
511 doubled the buffer size in spawn()
512 bump buffer size up to 16384
513 only report progress in 5% increments
514 src/GLIArchitectureTemplate.py:
515 kernelpkgs.txt support code
516 above disabled because it sucks
517 added add_pkg_to_world()
518
519 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
520 src/GLIArchitectureTemplate.py:
521 use tar | tar to copy files in copy_pkg_to_chroot()
522 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
523
524 23 Oct 2005; Preston Cody <codeman@gentoo.org>
525 DEBUGGING ADDED TO AT. verbose field added to CConfig.
526
527 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
528 src/net/server/gliserv.py:
529 / maps to index.html
530 look for actual files in html/
531 src/net/html:
532 new template
533 src/GLIUtility.py:
534 added parse_vdb_contents()
535 src/GLIArchitectureTemplate.py:
536 added copy_pkg_to_chroot()
537 added debug code to dynamic-stage3
538 switch dynamic-stage3 to new method
539 lots of bug fixes from adding debug code
540
541 22 Oct 2005; Preston Cody <codeman@gentoo.org>
542 webgli initial bootloader support + changed make.conf.
543 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
544
545 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
546 src/GLIUtility.py:
547 horrible tangled mess of code that is tarball unpacking subprogress display
548 add unpack progress to portage snapshot
549 use read() instead of readlines() in spawn()
550 only update progress bar for whole percents
551
552 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
553 src/templates/x86ArchitectureTemplate.py:
554 change call to 'grub' to use GLIUtility.exitsuccess()
555 add definition of 'build_mode' in _configure_lilo()
556 src/misc/updategtkfe, src/misc/updateglid:
557 fix so subshell is called in root shell
558
559 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
560 src/net/server/handlers/WebGLIHandler.py:
561 stage screen launches URI browser in sized window with various properties set
562
563 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
564 src/misc/updategtkfe:
565 updated to actually work
566 remove previous snapshot and extracted dir before downloading
567 src/misc/updateglid:
568 updated to actually work
569 src/templates/x86ArchitectureTemplate.py:
570 fixed bug where grub code was looking for 'root+root+file_name2'
571
572 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
573 src/net/server/handlers/WebGLIHandler.py:
574 URI browser
575 added mirror selection
576 src/GLIUtility.py:
577 ls via ssh strips off ending *
578
579 16 Oct 2005; Preston Cody <codeman@gentoo.org>
580 more updates to webgli. stage selection.
581
582 11 Oct 2005; Preston Cody <codeman@gentoo.org>
583 updated webgli with preliminary Network Mounts support.
584
585 9 Oct 2005; Preston Cody <codeman@gentoo.org>
586 GenDialog: string formatting and yes/no label fixes.
587 added WebGLI template for gliserv.py
588 added WebGLIHandler as well as a definition for it in gliserv.py
589 updates to the webgli files even though they won't be there for long.
590 Utility: remove exception for non-existant grppkgs.txt until the new livecd
591 goes public.
592
593 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
594 src/net/server/gliserv.py:
595 override dict to not be so anal
596 main server now loads separate module to handle requests
597 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
598 split out profile URLs into separate handler function
599 move handlers into subdirectory
600 add Welcome and Clients handlers
601
602 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
603 src/GLIUtility.py:
604 raise exception if password prompt received twice
605
606 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
607 src/GLIUtility.py:
608 removed rot13ify()
609
610 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
611 src/net/server/gliserv.py:
612 allow for param to be passed multiple times in GET
613 no XMLRPC functions return None
614 modify POST request parsing to only create a list if needed
615 fix GET request parsing so the list creation for multiple values works
616 src/net/client/gliclient.py:
617 various typo and type mismatch fixes
618 exit after exception
619
620 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
621 src/net/client/gliclient.py:
622 initial commit
623 pass MAC to XMLRPC functions
624 src/net/server/GLIServerProfile.py:
625 rename GLIClientsProfiles to GLIServerProfile
626
627 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
628 src/net/server/gliserv.py:
629 now handles POST requests
630 move majority of request handling code to common_handler() to reduce code
631 duplication
632 profile loading
633 client reg via XMLRPC goes into SharedInfo()
634 /showclients redesign
635 template fixes
636 allow handler functions to add/change headers
637 save profile
638
639 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
640 src/net/server/GLIClientsProfiles.py:
641 initial commit
642 src/net/server/template.html:
643 initial commit
644 src/net/server/gliserv.py:
645 add template mojo
646
647 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
648 src/net/server/gliserv.py:
649 XMLRPC mojo
650
651 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
652 src/GLIArchitectureTemplate.py:
653 add code in _edit_config() to comment line where variable is defined
654 previously
655 insert new line under previous definition of variable if it exists
656 small _edit_config() cleanup
657 src/GLIStorageDevice.py:
658 add clear_partitions() function
659 new sizes for recommended partition layout
660 automatically calculate swap size for recommended layout
661
662 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
663 src/templates/x86ArchitectureTemplate.py:
664 fat16 mojo
665
666 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
667 src/GLIStorageDevice.py:
668 prevent do_recommended() from being run twice
669 rewrite do_recommended() to be more robust
670 src/GLIArchitectureTemplate.py:
671 rework _edit_config() to not write duplicate entries
672
673 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
674 src/GLIStorageDevice.py:
675 added do_recommended() function to automatically created 256M/1G/* layout
676
677 17 Sep 2005; Preston Cody <codeman@gentoo.org>
678 src/gli-dialog.py: added set_distcc to the list
679 GenDialog: added set_distcc. untested.
680 IP: added install_distcc flag.
681 AT: added install_distcc function based on the flag. runs after build_kernel
682 changed AT spawn command for distcc for nodeps.
683
684 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
685 src/GLIUtility.py:
686 add rot13ify() function
687
688 16 Sep 2005; Preston Cody <codeman@gentoo.org>
689 src/GenDialog.py
690 added a sentence of text. unchecking support added.
691
692 15 Sep 2005; Preston Cody <codeman@gentoo.org>
693 src/GLIUtility.py
694 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
695 src/GenDialog.py
696 still working on extra_packages. transformed the list to new format.
697 added GRP indication to list. untested.
698 TODO lists updated.
699 src/fe/dialog/gli-dialog.py
700 spelling mistook.
701
702 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
703 src/GLIUtility.py:
704 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
705
706 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
707 src/GLIUtility.py:
708 add get_directory_listing_from_uri()
709 add http support to above
710 add ftp support to above
711 add scp support to above
712 src/GLIArchitectureTemplate.py:
713 "0" instead of 0 for key of single-element dict passed to _edit_config()
714
715 5 Sep 2005; Preston Cody <codeman@gentoo.org>
716 value_only -> only_value
717
718 3 Sep 2005; Preston Cody <codeman@gentoo.org>
719 gutted out all of etc_portage structure since it is now all handled by
720 etc_files
721
722 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
723 src/GLIArchitectureTemplate.py:
724 install_packages() sends progress update notifications
725 src/templates/x86ArchitectureTemplate.py:
726 increase sleep to 5s between format tries
727 src/GLIClientController.py:
728 pass 'self' to AT instead of 'self._pretend'
729
730 2 Sep 2005; Preston Cody <codeman@gentoo.org>
731 logger -> logger.log in x86AT
732
733 1 Sep 2005; Preston Cody <codeman@gentoo.org>
734 added set_etc_portage to IP. debugging gli-d's support for it.
735
736 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
737 src/templates/x86ArchitectureTemplate.py:
738 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
739
740 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
741 src/GLIArchitectureTemplate.py:
742 add _portage_best_version() function and rework install_packages() to allow
743 for future X of Y tracking
744 Use best_visible instead of best_version
745 tracked down and fixed missing = causing empty install extra packages
746 use = when emerging also
747 quickpkg hokey pokey
748 run _get_packages_to_emerge() again with -pk
749
750 22 Aug 2005; Preston Cody <codeman@gentoo.org>
751 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
752 the end of install_packages.
753 added updateglid to /src/misc
754 updated all core files with new GPL notice and copyright statement.
755
756 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
757 src/GLIUtility.py:
758 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
759 a snapshot in /mnt/cdrom/snapshots/
760 get_snapshot_from_cd() adds file:// at the beginning
761 change calls to extra package special case functions to 'self.blah'
762
763 21 Aug 2005; Preston Cody <codeman@gentoo.org>
764 src/ArchTemplate: changed "voodoo".
765 changed order of portage sync methods. made a fallback to webrsync if
766 normal emerge sync fails.
767 removed get_sources_from_cd because it is obsolete.
768 add special cases to install_packages. remove fatal exception on package
769 install failure b/c the box will still be bootable.
770 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
771 handled in the FEs.
772 src/GenDialog: added a bunch of code for dealing with x11-based packages.
773 awaiting testing.
774
775 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
776 src/GLIStorageDevice.py:
777 global try/except block around fs resizable detection code
778 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
779 install-failed cleanup function
780
781 18 Aug 2005; Preston Cody <codeman@gentoo.org>
782 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
783
784 16 Aug 2005; Preston Cody <codeman@gentoo.org>
785 GLIGenDialog:
786 add drive choices for loaded configs.
787 force snapshot for dynamic_stage3
788 init the snapshoturi input to the cd snapshot if not already selected.
789 if dynamic_stage3, skip the make.conf step.
790 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
791 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
792
793 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
794 src/GLIArchitectureTemplate.py:
795 manually call MAKEDEV in stage3-dynamic code
796 copy /etc/inittab.old to /etc/inittab in chroot
797 src/GLIUtility.py:
798 add beginning of validate_uri() function
799 add file:/// support to validate_uri()
800 single quotes when setting livecd password
801
802 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
803 src/GLIGenDialog.py:
804 change getmountpoint() to get_mountpoint()
805 src/misc/updategtkfe:
806 committed script to automatically download latest snapshot and run gtkfe
807 src/templates/x86ArchitectureTemplate.py:
808 fix _configure_lilo_add_windows() for IP -> GLISD stuff
809 src/GLIArchitectureTemplate.py:
810 give tmp_minor an initial value in mount_local_partitions so that the value
811 remain from the previous drive
812
813 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
814 src/templates/x86ArchitectureTemplate.py:
815 Fix _configure_lilo() for IP using GLISD stuff
816 src/GLIArchitectureTemplate.py:
817 install_cron_daemon() treats "none" specially
818
819 14 Aug 2005; Preston Cody <codeman@gentoo.org>
820 old patch from Steven Mertens to resolve bug #96642
821 numerous asthetic changes to GenDialog, no real functionality changes though.
822 strings renamed for global use if necessary.
823 fix all three parts of bug 102291
824 disable set_etc_portage until fully-written.
825
826 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
827 src/GLIClientController.py:
828 lower-case http/ftp proxy envvars
829
830 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
831 src/GLIClientController.py:
832 log end of pre_install steps to aid in debugging
833 src/templates/x86ArchitectureTemplate.py:
834 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
835
836 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
837 src/GLIArchitectureTemplate.py
838 check to make sure that the device node we're wait for to exist isn't of
839 type 'free'
840
841 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
842 src/GLIGenDialog.py:
843 convert install_packages to list in set_extra_packages()
844 check return code of checklist() call in "Manual" section
845 *actually* fix the first problem
846
847 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
848 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
849 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
850
851 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
852 src/GLIArchitectureTemplate.py:
853 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
854
855 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
856 Add CDATA support to SimpleXMLParser and add utility functions for it.
857
858 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
859 src/GLIArchitectureTemplate.py:
860 Fix case where vixie-cron is specified as a full package atom, as we still
861 don't want to run 'crontab /etc/crontab' for it.
862
863 *GLI-0.1 (3 Aug 2005)
864
865 30 Jul 2005; Preston Cody <codeman@gentoo.org>
866 add scp to list of is_uri() so GenDialog doesn't complain.
867 fixed livecd-kernel bug in bootloader code.
868 fixed gendialog for dynamic_stage3 instead of "networkless"
869 change bootloader to allow for both initrd and initramfs.
870 fix IP for dynamic_stage3.
871 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
872
873 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
874 Added full scp:// URI support to get_uri() in GLIUtility
875 Remove "networkless" from dynamic stage3 if locic.
876 Remove print statement from scp:// code.
877 Change scp code to check for "assword: " instead of "Password:"
878 Fix post-install network code to create net.eth1+ symlink correctly
879 Check to make sure pkg can be split on / and some debugging code
880 Add 2>dev/null to emerge call in _get_packages_to_emerge()
881 SimpleXMLParser handles True/False/None correctly now
882 Comment out above fix
883 Add partitioning wait-for-device-to-exist code to mount_local_partitions
884
885 28 Jul 2005; Scott Myron <samyron@gentoo.org>
886 Removed a FIXME in the GLIClientConfiguration that is no
887 longer needed.
888
889 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
890 Default to x86 in ClientConfig
891 Typo in build-a-stage3 code.
892 Remove MAKEDEV call in build-a-stage3 postscript.
893
894 26 Jul 2005; Preston Cody <codeman@gentoo.org>
895 Rewrote init of IP for gli-d. Other GenDialog updates.
896 allow network_type to be None in CConfig.
897
898 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
899 Add _dynamic_stage3 option to IP.
900 Add check for that option to dynamic stage3 code in ArchTemplate.
901 Fix code to determine default route in get_eth_info() in GLIUtility.
902 Fix serialization of dns-servers in ClientConfig.
903
904 24 Jul 2005; Preston Cody <codeman@gentoo.org>
905 changed default values of cron/logger in IP.
906 moved GenDialog IP init out to the individual files. gli-dialog's version
907 will change quite a bit.
908
909 22 Jul 2005; Preston Cody <codeman@gentoo.org>
910 added ppcArchTemplate. blank now. working on yaboot.
911 modified ArchTemplate for amd64 and ppc custom kernels.
912 skeleton implementation of _configure_yaboot.
913 small fixes to other templates.
914
915 21 Jul 2005; Preston Cody <codeman@gentoo.org>
916 GenDialog updates. changed comment in IP.
917
918 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
919 src/GLIInstallProfile.py:
920 Fix codeman's screwup of changing the service seperator to ',' in the parser
921 without changing it in the serialization code! Also document this in a
922 comment so you find it easier. Everybody needs to make sure they update
923 their install profiles!
924
925 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
926 src/GLIArchitectureTemplate.py:
927 Fix casting of list to string and concat of None with string, as well as
928 commented prototype of checking that mounting actually worked (found a case
929 where mount can return success, but the mount won't be done).
930
931 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
932 src/templates/x86ArchitectureTemplate.py:
933 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
934 checking for the device, and sleeping 1 second each time.
935
936 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
937 src/templates/x86ArchitectureTemplate.py:
938 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
939 bootloader works again. Also rename _install_{grub,lilo} to
940 _configure_{grub,lilo} since they don't install the loaders anymore
941 themselves.
942
943 7 Jul 2005; Preston Cody <codeman@gentoo.org>
944 fix global USE flags to not include the arch types at the end.
945 updates to GenDialog and gli-d.
946
947 6 Jul 2005; Preston Cody <codeman@gentoo.org>
948 fixing bootloader code for no initrd and initrd->initramfs naming change.
949
950 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
951 Proper comments and parameters to GLIException in install_mta()
952 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
953 Add strip() to list_mirrors(), list_subarch_from_mirror() and
954 list_tarball_from_mirror() to eliminate blank last item.
955
956 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
957 Added stage3 generation code.
958
959 5 Jul 2005; Preston Cody <codeman@gentoo.org>
960 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
961 Mild changes to GenDialog.
962
963 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
964 Remove separate install step configure_rc_conf() since it's handled by
965 update_config_files()
966 Make a copy of newvalues in _edit_config() so quotes aren't added when the
967 function is called twice on the same file.
968
969 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
970 Missing \ in sed in _get_packages_to_emerge()
971 Removed explicit emerging of hotplug and no longer add it to the runlevel.
972 Check in _quickpkg_deps() to ignore blank package names returned from
973 _get_packages_to_emerge()
974
975 28 Jun 2005; Preston Cody <codeman@gentoo.org>
976 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
977 in the dialog.py gauge code.
978
979 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
980 Add code to update_config_files() to go through etc_files and update stuff.
981 Check to see that _etc_files['make.conf'] exists in get_make_conf()
982 Only use float() in partition xml parsing code if type == "free"
983
984 28 Jun 2005; Preston Cody <codeman@gentoo.org>
985 finished almost all internationalization of GenDialog.
986 attempt at fixing rc.conf function. moved 3 generate functions out of
987 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
988 added dialog.py to the fe/dialog directory so it actually gets used.
989
990 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
991 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
992
993 27 Jun 2005; Preston Cody <codeman@gentoo.org>
994 fix extra entry in list_mirrors()
995 beginning internationalization runthrough.
996
997 26 Jun 2005; Preston Cody <codeman@gentoo.org>
998 added dialog.py to /src temporarily until it gets accepted upstream.
999 fix for unused value in form in dialog.py and changed heights.
1000 fix GenDialog forms.
1001
1002 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1003 Changed hostname/domainname for new baselayout.
1004 Changed _add_to_runlevel errors to logs.
1005 Updated TODO list to show status of GenDialog
1006 More updates to GenDialog including two checklists that probably won't work.
1007 update IP to use comma-separated list instead of space separated for services.
1008
1009 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1010 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1011 GenDialog as it gets closer to completion.
1012
1013 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1014 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1015 instead of int() in add_partition_device_partition() for minor (closes 96804)
1016
1017 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1018 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1019 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1020 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1021
1022 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1023 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1024 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1025 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1026 Fix undefined variable 'output' issue in spawn().
1027
1028 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1029 More updates to GenDialog and gli-d.
1030
1031 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1032 Modify list_mirrors() to return a list of mirror URL/name pairs.
1033
1034 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1035 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1036 get subarch.
1037
1038 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1039 Backend partitioning will create disklabel is none exists. Installprofile
1040 defaults to "" now instead of "msdos" for disklabel type. Fix for
1041 mount_local_partitions() to remember device along with minor in the
1042 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1043 add else block to log unsupported netmount types to mount_network_shares()
1044
1045 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1046 src/GLIArchitectureTemplate.py:
1047 Refactor kernel_compile common stuff, fix 2.4 build process.
1048 src/fe/cli/clife.py:
1049 Logging system.
1050 src/GLIUtility.py, src/GLIStorageDevice.py:
1051 Add comments about re-writes needed for boxes without sysfs.
1052
1053 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1054 src/GLIArchitectureTemplate.py:
1055 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1056 'make dep' call for custom compile. build_mode support for prepare-only and
1057 none types completed. custom compile function chains shell functions in
1058 spawned script, to allow for catching all errors.
1059
1060 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1061 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1062 and GenDialog. other gendialog updates as well. kernel updates untested.
1063
1064 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1065 src/GLIInstallProfile.py:
1066 Change structure of etc-portage stuff. The serialization was broken before my
1067 last commit, and I am the only person that's ever used it. The new schema is
1068 as follows:
1069 <etc-portage>
1070 <file name="package.mask"/>
1071 <file name="package.unmask">
1072 <entry atom="sys-kernel/openmosix-sources"/>
1073 </file>
1074 <file name="package.use">
1075 <entry atom="sys-libs/db">
1076 -java
1077 </entry>
1078 <entry atom="dev-libs/cyrus-sasl">
1079 -ldap
1080 </entry>
1081 </file>
1082 </etc-portage>
1083
1084
1085 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1086 src/GLIInstallProfile.py:
1087 Add new entry for gli-profile/kernel-build-method item. Add missing
1088 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1089 keys in the same order.
1090
1091 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1092 src/GLIArchitectureTemplate.py:
1093 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1094 was repeatedly appended to make.conf.
1095
1096 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1097 src/GLIArchitectureTemplate.py:
1098 Put some Linux-2.6 specific code under a if statement. Store list of
1099 successfully mounted swap device for using swapoff. Add proper error checking
1100 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1101 'file'. Clean up some redundant code (thanks to pychecker).'
1102
1103 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1104 Fix typos: get_extended() instead of get_extended_partition(). Added
1105 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1106 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1107
1108 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1109 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1110 in add_network_interface.
1111
1112 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1113 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1114 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1115 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1116 prepare_chroot.
1117
1118 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1119 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1120 +src/fe/installer-gtk:
1121 Add new automated CLI frontend. Add scripts that are the intended means to
1122 use each frontend.
1123
1124 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1125 src/GLIClientController.py:
1126 Add null type to network config, for cases where the interface is already up
1127 and should not be touched (netboot for example).
1128
1129 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1130 src/GLIArchitectureTemplate.py:
1131 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1132 string!. Try to use binary packages if available by default.
1133
1134 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1135 src/GLIArchitectureTemplate.py:
1136 More error checking for _add_to_runlevel, to ensure that the init script
1137 actually exists before we try to add it. set_services phase must take place
1138 after the package installation, otherwise the init scripts might not exist.
1139 Find the correct init script for the cron and logging daemons, and add that
1140 instead of the package atom.
1141
1142 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1143 src/GLIArchitectureTemplate.py:
1144 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1145 usage of 'file' to 'contents' for the variable name, as it shadows
1146 __builtin__.file.
1147
1148 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1149 src/GLIArchitectureTemplate.py:
1150 Add MTA install code, and include MTA install phase. Ensure
1151 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1152 for 'none' kernel config for build_kernel phase. Put kernel_script in
1153 /var/tmp instead of /root for build_kernel phase.
1154
1155 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1156 Rename mta variables to match syslog/cron variables.
1157
1158 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1159 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1160 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1161 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1162 src/templates/.cvsignore, src/tests/.cvsignore:
1163 Refactor partition formatting again to include error checking. Allow 'none'
1164 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1165
1166 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1167 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1168 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1169 only have a single spawn call.
1170
1171 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1172 refixed samyron's fix of set_architecture_template.
1173
1174 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1175 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1176 be executable.
1177
1178 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1179 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1180 error checking when you call set_architecture_template.
1181
1182 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1183 moved the mkfsopts input to the partition options menu instead of the during
1184 the creation process. updated GenDialog to say it supports reiserfs v3.
1185
1186 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1187 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1188 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1189 Add support for other partition types to dialogfe.
1190 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1191 avoid integer overflows and wraparounds.
1192
1193 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1194 Removed start/end from XML output and added mkfsopts to partitioning info.
1195 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1196 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1197 in GLIClientConfiguration. Change from .1 and .9 to constants for
1198 partitioning. Fix free space overwriting bug. Remove a few unused functions
1199 from rewrite. Fix call to get_partition_at()
1200
1201 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1202 Updates to GenDialog and dialogfe.
1203
1204 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1205 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1206
1207 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1208 more GenDialog updates to partitioning.
1209
1210 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1211 Indenting issue in GLISD/get_ordered_partition_list.
1212 updates to GenDialog partitioning and added default UTC for timezone in IP.
1213
1214 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1215 Added GLISD.get_model()
1216
1217 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1218 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1219 More updates to GenDialog :)
1220
1221 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1222 Added get_interface_realname() function.
1223
1224 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1225 Added auto-save of CConfig and copying to new /root after install.
1226 yet even more GenDialog updates.
1227
1228 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1229 removed print statement from GLISD. more updates to GenDialog.
1230
1231 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1232 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1233 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1234 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1235 places in GLIClientConfiguration.
1236
1237 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1238 Fix mount_local_partitions(), configure_fstab(), and
1239 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1240 A few more fixes for templates/x86Archtemplate
1241
1242 27 May 2005; Preston Cody <codeman@gentoo.org>
1243 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1244 a work in progress.
1245
1246 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1247 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1248 directly. GLISD can now handle data imported from XML.
1249
1250 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1251 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1252 handle blank (no disklabel) disks.
1253
1254 20 May 2005; Preston Cody <codeman@gentoo.org>
1255 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1256 up, documented, and separated out serialization and grouped all sections.
1257
1258 19 May 2005; Preston Cody <codeman@gentoo.org>
1259 Reorganization of ClientConfiguration and gutting of unused functions.
1260 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1261
1262 18 May 2005; Preston Cody <codeman@gentoo.org>
1263 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1264
1265 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1266 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1267 partitioning. CC serializes install profile to disk and prepare_chroot()
1268 copies it into /mnt/gentoo/root
1269
1270 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1271 Moved URI parsing into new function parse_uri()
1272
1273 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1274 Added XMLParser module.
1275
1276 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1277 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1278 Minor fix to is_uri() regex to allow hyphens in hostname.
1279
1280 12 May 2005; Preston Cody <codeman@gentoo.org>
1281 Updated finishing_cleanup for new unmounting method from agaffney.
1282
1283 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1284 Fix GLILogger to use correct time format string. Fix _edit_config() to
1285 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1286 unicode support to is_realstring().
1287
1288 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1289 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1290 return value instead of non-zero. Add code to output a traceback to the
1291 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1292 instead of --nocolor.
1293
1294 10 May 2005; Preston Cody <codeman@gentoo.org>
1295 Added GLIGenDialog.py to make a generic class for the dialog functions that
1296 can be used by both dialogfe and the netfe/be. updated both for new filename.
1297 date changes. 2004->2005.
1298
1299 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1300 Removed 'quiet=True' from spawn() calls
1301
1302 10 May 2005; Preston Cody <codeman@gentoo.org>
1303 Updated GLIUtility with patches from chotchki. Also added documentation
1304
1305 9 May 2005; Preston Cody <codeman@gentoo.org>
1306 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1307 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1308 from bug #89683, mostly touchups.
1309
1310 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1311 GLIStorageDevice cleanup patch from bug #91761
1312
1313 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1314 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1315 _edit_config(). Error logging casts 'error' to str
1316
1317 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1318 Exceptions received in CC are logged before being passed to the FE. Added
1319 code to CC to handle exceptions *not* thrown by the installer itself.
1320
1321 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1322 get_max_mb_for_resize() returns -1 if not self.resizeable
1323
1324 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1325 More dirty rsync hacks :-/
1326
1327 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1328 Patches from chotchki (bug #90325) to improve CC networking. untested.
1329
1330 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1331 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1332 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1333 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1334 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1335 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1336 _get_packages_to_emerge()
1337
1338 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1339 Added group-adding code to set_users in ArchTemplate
1340
1341 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1342 Added post-install script code
1343
1344 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1345 Fixed encapsulation issues in GLIClientController (bug #90141)
1346
1347 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1348 Update resizing code in GLIStorageDevice
1349
1350 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1351 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1352
1353 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1354 Reverted change to ArchTemplate and added support for commented line in old
1355 code.
1356
1357 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1358 Changed _edit_config() to modify value in-place instead of commenting out and
1359 adding the new value to the end of the file.
1360
1361 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1362 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1363 Also updated TODO list.
1364
1365 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1366 Use blackace's one-liner to add comments for all function for use with
1367 pythondoc.
1368
1369 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1370 Moved 'end >= device_sectors' check out of loop to check for next partition's
1371 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1372 Partitioning code now tracks start/end of extended for placing logicals. End
1373 point of logical is now adjusted along with start.
1374
1375 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1376 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1377 the way of partitioning from a blank disk. Add int() around access to minor
1378 key in partition information due to new partition code leaving them as float.
1379
1380 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1381 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1382
1383 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1384 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1385
1386 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1387 Added support for DHCP options and MAC addresses in the InstallProfile.
1388
1389 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1390 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1391 sed to properly strip out junk.
1392
1393 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1394 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1395 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1396
1397 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1398 Fixed indent problem in GLICController
1399
1400 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1401 Check for disklabel type "loop" and use the device name without a minor.
1402
1403 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1404 Remove /tmp/compile_output.log and /var/log/install.log when install is
1405 complete. Added code to (hopefully) keep 2nd thread running after install.
1406 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1407 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1408 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1409
1410 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1411 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1412 when unpacking tarball.
1413
1414 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1415 rewrote filesystem_tools. looks like it works so ripping out all the old
1416 filesystem_tools code.
1417
1418 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1419 Changed the print statements to logging in the partitioning BE code.
1420 the logger may need to be imported to the x86archtemplate. unknown yet.
1421 Added the finishing_cleanup function.
1422 added a fix to the logger from BenUrban
1423
1424 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1425 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1426 URIs. The blank uri check has been commented out.
1427 ripped out error checking of set_services. this is done by _add_to_runlevel.
1428
1429 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1430 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1431
1432 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1433 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1434 the install profile if available. Commented out spawn() debugging prints
1435
1436 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1437 small changes to setup_network_post. moved adding to runlevel of net.x to
1438 after the device gets symlinked. added domainname runlevel command.
1439
1440 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1441 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1442 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1443 spawn() call in livecd-kernel code to pass environment variables.
1444 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1445 the install profile if available.
1446
1447 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1448 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1449 to handle installing the livecd kernel into the new system.
1450
1451 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1452 should emerge hotplug and coldplug before adding them to runlevel.
1453
1454 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1455 took chroot out of grub_install command.
1456
1457 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1458 Changed chroot wrapper code in spawn() to write the wrapper the python way
1459 instead of the bash way to avoid quote conflicts. Added
1460 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1461 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1462 as it breaks the piping.
1463
1464 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1465 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1466
1467 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1468 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1469 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1470 GLIInstallProfile.
1471
1472 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1473 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1474 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1475 into /mnt/gentoo in prepare_chroot()
1476
1477 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1478 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1479 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1480 to start/end sectors
1481
1482 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1483 Add 2>&1 to cmd in spawn()
1484
1485 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1486 Modified GLIUtility.exitsuccess() to work with return value from
1487 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1488 creates wrapper script for commands run inside chroot so multiple commands
1489 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1490 for the generated script from spawn()
1491
1492 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1493 Removed default values for stage tarball URI and portage tree URI from
1494 InstallProfile. These should be set by the FEs. also added services step to
1495 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1496 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1497
1498 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1499 Small fix for setting the default gateway. Also added feature to dialogfe.
1500
1501 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1502 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1503
1504 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1505 Fixed a bunch of true -> True typos. lots of em
1506 only write new resolv.conf if there are dns servers listed.
1507
1508 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1509 Commented out 'display_on_tty8=True' in start_portmap()
1510
1511 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1512 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1513
1514 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1515 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1516 lang parameter to __init__()
1517
1518 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1519 updates to TODO list.
1520
1521 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1522 Initial code for quickpkg GRP support. Fix loop to grab packages from
1523 'emerge -p blah'
1524
1525 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1526 check for dhcp in the network stuff and emerge it if it is.
1527 added quickpkg to TODO list
1528
1529 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1530 Changed the raising of 'warning' exceptions to a simple log of the error
1531 so that the installer can continue.
1532
1533 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1534 Some big changes. First, changed most output to display_on_tty8.
1535 Second, added log lines to all templates. Some smaller fixes such as typos.
1536 Also did some cleanups of old commented lines.
1537
1538 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1539 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1540 Undo change with fix. Escaping fix in GLIStorageDevice.py
1541
1542 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1543 more updates to TODO list. hopefully we'll soon start removing items instead
1544 of adding them.
1545
1546 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1547 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1548
1549 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1550 updated TODO list. (again)
1551
1552 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1553 changed output of portmap start to display_on_tty8.
1554 fixed bootloader for udev and multiple kernels
1555 fixed custom kernel config (again)
1556
1557 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1558 changed default value of CC._enable_ssh to True because this is smart.
1559 added code to allow custom kernel .config. may be unstable and break. sorry.
1560
1561 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1562 partition() now waits until after it checks for partition flags before delete
1563 the partitions :P
1564
1565 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1566 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1567 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1568 blank.
1569
1570 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1571 Various fixes related to the add_users function. Still not yet finished.
1572 Added things to the TODO list. Lets start using that!
1573
1574 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1575 Added code to x86Template to format newly created partitions. Also added
1576 some error checking code. GLIStorageDevice passes 'minor' with data to
1577 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1578 mounting code.
1579
1580 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1581 Took out unnecessary setting of random livecd root password. the cd already
1582 sets it randomly.
1583
1584 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1585 Took out an unneeded step from CC's run()
1586
1587 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1588 Attempt at detecting and adding windows partitions to lilo.
1589
1590 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1591 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1592 partition. fixed misc exit_status => exitstatus typo.
1593
1594 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1595 Added basic code for resizing filesystems with pyparted. Fixed code for
1596 resizing ntfs and ext2/3.
1597
1598 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1599 Fixed partition() in x86Template so that it scans through logicals and deletes
1600 before deleting containing extended partition. Also clears partition table to
1601 be safe before third pass.
1602
1603 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1604 Added mount_network_shares. not able to test it from this computer.
1605 will test when i get back to school.
1606 also added start_portmap to the client_controller as an always-do.
1607 agaffney says this is needed for NFS mounts to work.
1608
1609 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1610 Partial rewrite of partitioning code in x86Template. No longer shells out to
1611 parted to perform actions, now uses all pyparted calls. Code "works" in a
1612 test, but still needs lots of TLC. Also modified tests/install.py to work
1613 with x86Template and GLIClientConfiguration.
1614
1615 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1616 Initial move of partitioning code from ArchTemplate to x86Template.
1617
1618 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1619 Added grp_install and services to InstallProfile. forgot about the set_root_password
1620
1621 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1622 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1623 Test Install ran very well (skipping partitioning).
1624
1625 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1626 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1627 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1628 some may still have eluded me.
1629
1630 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1631 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1632 Just finished mount_local_partitions in GLIArchitectureTemplate
1633
1634 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1635 Added get_num_sectors() to GLIStorageDevice.
1636
1637 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1638 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1639 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1640 from GLIInstallProfile.
1641
1642 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1643 GLIStorageDevice returns "unknown" instead of "" for get_type()
1644
1645 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1646 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1647 actually work. Commented out resizability checking code for speed.
1648
1649 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1650 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1651 GLIStorageDevice at the suggestion of plors
1652
1653 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1654 Added a function to GLIUtility to pull a value from a make.conf-style config
1655 file. Minor type fix to GLIInstallProfile.py
1656
1657 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1658 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1659 network mounts from partition data structure in GLIInstallProfile
1660
1661 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1662 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1663 can be resized.
1664
1665 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1666 Added some of the final functions to GLIInstallTemplate.
1667 Yes this project is still active despite rare use of the Changelog!
1668
1669 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1670 Added the GLIPartitionTools.py file. This is a temporary insertion of
1671 partitioning tools that will eventually go into their own package.
1672
1673 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1674 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1675 for the program). Added __init__(install_profile, client_configuration) to
1676 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1677 to avoid constantly passing stuff every time we call a method.
1678
1679 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1680
1681 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1682 files without messing up all the other stuff in them. This will be used for making
1683 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1684
1685 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1686
1687 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1688 have a few basic things. I added two private methods. One is _depends(). This
1689 will be used for dependency checking (ie. unpacking a tarball requires that
1690 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1691 same syntax as os.system(), however, instead of being run in the liveCD
1692 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1693 isolated the code. Hope to work more this week to get this class formed...
1694
1695 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1696
1697 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1698 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1699 to allow for easier modification (mutable, rather than immutable objects). Updated
1700 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1701 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1702 Added initial unit test code.
1703
1704 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1705
1706 Added initial changelog. Setting up the basic structure of the CVS repository
1707 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1708 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20