/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1356 - (show annotations) (download)
Thu Mar 9 04:16:17 2006 UTC (9 years, 5 months ago) by codeman
File size: 71691 byte(s)
  added networkless mode to gli-dialog.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2005 Gentoo Technologies, Inc.
3
4 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.617 2006/03/09 04:16:17 codeman Exp $
5
6 8 Mar 2006; Preston Cody <codeman@gentoo.org>
7 src/fe/dialog/gli-dialog and src/GLIGenDialog:
8 added networkless mode to gli-dialog.
9
10 6 Mar 2006; Preston Cody <codeman@gentoo.org>
11 src/templates/x86AT:
12 add windows detection code for grub. untested.
13
14 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
15 src/templates/x86ArchitectureTemplate.py:
16 bootloader and partitioning external commands log to compile_output.log
17 wait for device node to exist before resizing
18 add -v to ntfsresize command
19 src/GLIStorageDevice.py:
20 return start/end with ip structure
21 pad min ntfs size by 50 MB just to be safe
22 src/GLIArchitectureTemplate.py:
23 only install filesystem tools for partitions with a mountpoint
24
25 5 Mar 2006; Preston Cody <codeman@gentoo.org>
26 add error catching and text to saving profile dialogs
27
28 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
29 src/GLIPortage.py:
30 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
31 src/templates/x86ArchitectureTemplate.py:
32 fix checks for changed partitions so they will actually get deleted
33
34 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
35 src/GLIClientController.py:
36 slightly better error handling for pre-install failures
37
38 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
39 src/templates/x86ArchitectureTemplate.py:
40 proper return code checking for ext2/3 resizing
41
42 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
43 src/GLIClientController.py:
44 accept 'none' as well as 'null' for network type
45 src/GLIArchitectureTemplate.py:
46 ignore extended partitions in mount_local_partitions()
47 src/templates/x86ArchitectureTemplate.py:
48 use get_ordered_partition_list() instead of keys().sort() for new_part_list
49 check to make sure start sector for primary isn't less than end sector for
50 previous extended
51 src/GLIClientController.py:
52 write dns servers to /etc/resolv.conf
53
54 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
55 src/GLIPortage.py:
56 copy_pkg_to_chroot() uses compile_output.log for command output
57
58 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
59 only keep a 1000 line 'scrollback' buffer for the compile output and log file
60
61 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
62 src/GLIPortage.py:
63 add code make GLIPortage.py capable of being run stand-along for dynamic
64 stage3 generation and copying packages in a GRP-ish way
65 grp code fixups
66
67 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
68 src/GLIPortage.py:
69 ignore blank packages passed to get_deps() and emerge()
70
71 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
72 src/GLIUtility.py:
73 add get_chosts() function
74
75 *GLI-0.3 (12 Feb 2006)
76
77 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
78 src/templates/x86ArchitectureTemplate.py:
79 pull old start/end sector values from somewhere that actually has them
80 add logic for extended partition to code that makes sure new end sector
81 doesn't overlap start sector of next partitions
82 don't freak out if partition can't be deleted
83
84 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
85 src/GLIPortage.py:
86 run env-update at the end of copy_pkg_to_chroot()
87
88 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
89 src/templates/x86ArchitectureTemplate.py:
90 I'm a complete fscking dumbass. I recorded the end sector for partitions that
91 weren't being touched, but I never used it when recreating them...the end was
92 calculated from the size in MB instead :/
93
94 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
95 src/GLIArchitectureTemplate.py:
96 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
97 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
98 src/GLIPortage.py:
99 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
100 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
101 'resized' flag
102
103 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
104 src/GLIPortage.py:
105 short circuit and check vdb directly if package begins with '='
106
107 8 Feb 2006; Preston Cody <codeman@gentoo.org>
108 added more packages to extra_packages list in IP
109
110 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
111 src/templates/x86ArchitectureTemplate.py:
112 10 tries to create filesystem instead of 3
113 src/GLIPortage, src/GLIArchitectureTemplate.py:
114 ignore_missing flag for copy_pkg_to_chroot()
115
116 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
117 src/GLIPortage.py:
118 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
119
120 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
121 src/net/server/gliserv.py:
122 fix handling of 404 for real files
123 src/net/server/GLIServerProfile.py:
124 look for 'hostname' in attributes instead of 'name'
125
126 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
127 src/SimpleXMLParser.py:
128 initial support for 'include' in XML files
129 src/GLIStorageDevice.py:
130 initial support for %
131 src/GLIClientController.py:
132 add debugging statements to pre-install steps
133
134 15 Jan 2006; Preston Cody <codeman@gentoo.org>
135 webgli/configfiles:
136 check for key in etc_files['rc.conf'] to fix key error
137 webgli/timezone: small fix.
138 webgli/extrapackages: list-type fix
139 webgli/services: same
140 glimd: add/edit_client updates.
141
142 12 Jan 2006; Preston Cody <codeman@gentoo.org>
143 added configure.pyhtml to glimd. minor changes
144 to top and add_client. fixed up showargs.
145 added execute.pyhtml
146 changed register clients line in gliserv for name->hostname.
147 updated TODO.
148
149 10 Jan 2006; Preston Cody <codeman@gentoo.org>
150 src/net/server/*:
151 added add/del/edit client/profile.pythml for glimd.
152 updated templates, showclients, and gliserv.
153
154 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
155 src/net/server/*:
156 stupid threading module...
157
158 8 Jan 2006; Preston Cody <codeman@gentoo.org>
159 AT: rc.conf -> conf.d/clock
160
161 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
162 src/GLIPortage.py:
163 show 'Calculating dependencies for ...' in subprogress bar at beginning of
164 emerge()
165 src/GLIArchitectureTemplate.py:
166 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
167 in the chroot
168 remove _quickpkg_deps() and _portage_best_{visible,version}()
169 src/GLIUtility.py:
170 fail immediately in validate_uri() if provided URI can't be parsed
171 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
172 debug code in spawn()
173 use lower-level os.read() instead of file.read() because python sucks
174 src/templates/x86ArchitectureTemplate.py:
175 basic subprogress reporting for partitioning
176 total_steps was 1 too high
177
178 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
179 src/GLIUtility.py:
180 move parse_vdb_contents() to GLIPortage
181 src/GLIPortage.py:
182 remove all symlink fixups
183 ignore 'dir' entries in CONTENTS
184 call tar with -p
185
186 5 Jan 2006; Preston Cody <codeman@gentoo.org>
187 AT: bootsplash is now gensplash
188 gliserv: add advanced_mode to shared_info
189 webgli: Added advanced mode. mostly just disables a few screens.
190
191 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org>
192 src/GLIPortage.py:
193 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
194 added emerge()
195 update sub-progress after each package is emerged
196 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
197 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
198 remove link if it exists before moving content into place
199 src/GLIArchitectureTemplate.py:
200 install_packages() now calls emerge() in GLIPortage
201 change all calls to self._emerge() to self._portage.emerge()
202 comment out all emerge status checking...using exceptions now
203 call copy_pkg_to_chroot() directly for livecd-kernel
204
205 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
206 src/GLIArchitectureTemplate.py:
207 remove add_pkg_to_world() and copy_pkg_to_chroot()
208 copy installer.log to installer.log.failed on install failure
209 src/GLIUtility.py:
210 added get_keymaps()
211 spawn() takes any False argument for chroot instead of just None
212 src/GLIPortage.py:
213 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
214 change copy_pkg_to_chroot() to work properly with use_root=False
215 figure PORTAGE_TMPDIR properly
216
217 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
218 src/net/server/html/*:
219 converted showclients, load/saveprofile
220
221 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
222 src/GLIPortage.py:
223 exclude packages already in chroot vdb from binary deplist
224 chroot to use best_version for chroot's vdb
225 src/runtimedeps.py:
226 accept ROOT via commandline instead of env
227
228 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
229 src/runtimedeps.py:
230 remove passing of ROOT
231 src/GLIPortage.py:
232 modify get_deps() to get deptree for each package and merge into final list
233 remove depgraph class
234 add debugging code to get_deps()
235 src/GLIArchitectureTemplate.py:
236 combine code for GRP/compile in install_packages() into one block
237 debugging code in install_packages()
238
239 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
240 src/runtimedeps.py:
241 initial commit
242 src/GLIPortage.py:
243 use separate script for GRP deps
244 remove calls to portage module
245
246 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
247 src/GLIPortage.py:
248 initial commit
249 move some of portage function from GLIAT
250 flipped around a few function args
251 src/GLIArchitectureTemplate.py:
252 revamp install_packages() for new GLIPortage
253
254 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
255 src/GLIArchitectureTemplate.py:
256 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
257
258 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
259 src/net/server/gliserv.py:
260 wrap generated code in a class to isolate it a bit better
261 302 redirects work
262 don't use cgi.escape() for <% %>
263 src/net/server/html/webgli/*:
264 load/save profile
265 src/GLIUtility.py:
266 change /sbin/lspci to just lspci
267
268 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
269 src/GLIClientController.py:
270 change ordering of statements in CC run() while loop to not go past the end
271 of the array
272 src/GLIArchitectureTemplate.py:
273 removed redundant bind mounts
274
275 18 Dec 2005; Preston Cody <codeman@gentoo.org>
276 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
277 added a diagram by blackace from last night.
278 added the glossary in RTF format.
279
280 17 Dec 2005; Preston Cody <codeman@gentoo.org>
281 x86AT: separated out emerge/configure from running of bootloader
282 added MBR drive support to lilo.
283 these changes will likely not work.
284 AT: added setup_and_run_bootloader step.
285
286 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
287 src/net/server/gliserv.py:
288 call generated code in a function
289 src/net/server/html/webgli/*:
290 include top/bottom
291 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
292 src/GLIClientCongifuration.py:
293 install mode magic
294
295 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
296 src/GLIClientController.py:
297 use GLIException when there's an import problem
298 added debug code to show install_steps
299 src/templates/amd64ArchitectureTemplate.py:
300 add . to import path
301 proper path this time: ../../templates
302 src/GLIArchitectureTemplate.py:
303 add _portage_best_version() function
304
305 11 Dec 2005; Preston Cody <codeman@gentoo.org>
306 added initial glossary and gimli diagram to the docs directory.
307 modify gli-dialog to allow editing of the install_profile after loading XML.
308
309 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
310 src/net/server/html/webgli/:
311 converted globaluse, localuse, networkmounts, portagetree, and stageselection
312 moved saveclientconfig stuff into clientconfig
313 moved saveconfigfiles into config files
314 converted etc_portage and makedotconf
315 converted bootloader and kernel
316 convert daemons, extrapackages, networking, review, services, timezone, users
317 src/net/server/gliserv.py:
318 proper 404 handling for .pyhtml extension
319 HTML escape <% %> stuff
320 work around python's sucky regexes
321 src/GLIInstallProfile.py:
322 allow set_{rsync,ftp,http}_proxy() to accept empty values
323
324 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
325 src/net/server/gliserv.py:
326 initial commit of Legolas templating engine
327 302 redirects
328 src/net/server/html/index.html, src/net/server/webgli_template.html:
329 minor changes for new code
330 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
331 initial commit of the conversion from the monolithic WebGLIHandler.py to the
332 one file per path Legolas goodness
333 partitioning[2-4] done
334
335 5 Dec 2005; Preston Cody <codeman@gentoo.org>
336 webgli: dhcp options in CC and post-install.
337 updated comparison chart.
338 webgli: etc/portage/* and distcc support added. not too-well tested.
339
340 4 Dec 2005; Preston Cody <codeman@gentoo.org>
341 webgli_template.html: valign=top on left side.
342 webgli: fix bootloader boot_device. now working.
343 webgli: CC proxy done. post-install proxy in progress.
344
345 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org>
346 src/net/server/webgli_template.html:
347 increase padding for content cell to 7px and add colspan=2
348
349 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org>
350 webgli: added graphic bar on top
351 webgli: added hover effects on the links on the left
352 webgli: re-rendered header_bg.png to stretch without artifacts
353
354 3 Dec 2005; Preston Cody <codeman@gentoo.org>
355 webgli: make.conf disabling fixes for dynamic_stage3
356 fixed portage snapshot browse popup
357 all changes tested.
358 webgli: add debug mode to CC screen. the screen still needs lots of work.
359
360 1 Dec 2005; Preston Cody <codeman@gentoo.org>
361 added debug mode question to gli-dialog
362 added CC proxies to CC networking for gli-dialog
363 webgli: fixed skip CC networking if connection active
364 webgli: portage snapshot defaults to CD
365 webgli: bootloader mbr drive selection
366 webgli: USE flags unselectable if dynamic_stage3
367 webgli: manual extra packages and save button.
368
369 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
370 src/GLIUtility.py:
371 change ping count to 2
372 docs/comparison.html
373 initial commit
374
375 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
376 src/templates/x86ArchitectureTemplate.py:
377 fix map() issue with grub code
378 replace kernel_names and initrd_names loops with one-liners
379
380 27 Nov 2005; Preston Cody <codeman@gentoo.org>
381 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
382 initial gli-dialog support for recommended partitioning layout and clear.
383 failure cleanup now an option for gli-dialog.
384 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
385 added comparison list and updated TODO!
386
387 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
388 src/GLIArchitectureTemplate.py:
389 fix to stage1() debug code
390 fix to stage2() debug code
391
392 26 Nov 2005; Preston Cody <codeman@gentoo.org>
393 some more bootloader code fixes. forgot boot_device != mbr_device.
394
395 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
396 src/GLIStorageDevice.py:
397 fix to unallocated space merging when last one is after part 4
398
399 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
400 src/GLIArchitectureTemplate.py:
401 small fix to debugging code in copy_pkg_to_chroot()
402
403 23 Nov 2005; Preston Cody <codeman@gentoo.org>
404 more bugfixes with bootloader code
405 gli-dialog side appears to work
406
407 21 Nov 2005; Preston Cody <codeman@gentoo.org>
408 initial adding of boot_device to backend.
409 initial boot_device support added to gli-dialog.
410 some fixes of my poor coding
411
412 20 Nov 2005; Preston Cody <codeman@gentoo.org>
413 converted gli-dialog to use the install_package_list.
414 gtkfe has already been converted by AllanonJL
415 new way working in gli-dialog now and added to webgli.
416 added set/get_boot_device() to IP
417
418 19 Nov 2005; Preston Cody <codeman@gentoo.org>
419 get_install_package_list added to InstallProfile. This can be used by the FEs
420
421 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
422 src/templates/x86ArchitectureTemplate.py:
423 call ls with '-1 --color=no'
424
425 16 Nov 2005; Preston Cody <codeman@gentoo.org>
426 added warning (#9) to GRP ppl about stage3 tarballs
427
428 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
429 src/GLIArchitectureTemplate.py:
430 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
431 confused
432
433 13 Nov 2005; Preston Cody <codeman@gentoo.org>
434 removed protocols from rc.conf screens
435 finished initial rc.conf and make.conf in webgli
436
437 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
438 src/net/server/gliserv.py:
439 add -h option to usage()
440 show time and request URI in debug mode
441 show client IP in debug mode
442 just use IP instead of trying to do a reverse lookup
443
444 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
445 src/net/server/gliserv.py:
446 'classier' 401 message
447 proper commandline parsing
448 help via -h
449 user/pass can be specificed via commandline option
450
451 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
452 src/net/server/gliserv.py:
453 basic HTTP auth
454
455 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
456 src/net/server/gliserv.py:
457 dynamic module reloading (yipee!)
458 send 'Last-Modified' header for real files
459 respond to HEAD with just headers
460 src/net/server/handlers/WebGLIHandler.py:
461 icons for drives
462
463 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
464 src/net/server/handlers/WebGLIHandler.py:
465 initial 'pretty' partition table display support
466 clicking partition in 'pretty' display works instead of radio buttons
467 radio buttons and pretty display work together
468 META redirect instead of javascript
469 pretty display stretches across entire screen
470 'Recommended layout' and 'Clear drive' functions
471 properly catch exceptions from do_recommended()
472 src/GLIArchitectureTemplate.py:
473 replace preinst, copy, postinst, rm steps with qmerge
474 whoops...that shouldn't have been commented out
475 create image_dir with -p in copy_pkg_to_chroot()
476 more generic of symlink crappiness
477 new copy_pkg_to_chroot() actually works now
478
479 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
480 src/GLIStorageDevice.py:
481 initial generic disk support
482 fixes for add_partition() code
483 src/net/server/handlers/WebGLIHandler.py:
484 added support for creating generic disks
485 add new partition working
486 save and delete partitions
487
488 6 Nov 2005; Preston Cody <codeman@gentoo.org>
489 webgli: Partitioning making progress.
490
491 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
492 src/GLIArchitectureTemplate.py:
493 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
494 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
495 dir) and works around /etc/gconf symlink problem
496
497 5 Nov 2005; Preston Cody <codeman@gentoo.org>
498 webgli: lots of updates. preliminary partitioning. extra packages works.
499
500 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
501 src/net/server/gliserv.py:
502 httpd now supports HTTPS and falls back to HTTP if not available
503 make fallback actually work
504 src/net/server/SecureXMLRPCServer.py:
505 SecureSocketServer is now threaded
506
507 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org>
508 src/net/client/gliclient.py:
509 try to use HTTPS for XMLRPC first and fallback to HTTP
510 pretend mode
511 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
512 HTTPS XMLRPC goodness from samyron
513 pass name of certificate
514
515 31 Oct 2005; Preston Cody <codeman@gentoo.org>
516 wegli: daemons and services screens done.
517
518 30 Oct 2005; Preston Cody <codeman@gentoo.org>
519 webgli: networking and users screens
520 added return_redirect to handler.py
521 loading and saving install/client profiles works for webgli now
522 Review also done
523
524 *GLI-0.2 (27 Oct 2005)
525
526 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
527 src/templates/x86ArchitectureTemplate.py:
528 properly check for bootloader emerge exist status with exitsuccess()
529 log output of grub install command
530 add --batch --no-floppy to grub command
531 grubinstallstring only gets logged if debug is on
532 src/GLIUtility.py:
533 update progress bar to 100% when process finishes
534
535 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
536 src/GLIClientController.py:
537 added debugging code for the interaction between the 2 threads via Event()
538 src/GLIUtility.py:
539 doubled the buffer size in spawn()
540 bump buffer size up to 16384
541 only report progress in 5% increments
542 src/GLIArchitectureTemplate.py:
543 kernelpkgs.txt support code
544 above disabled because it sucks
545 added add_pkg_to_world()
546
547 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
548 src/GLIArchitectureTemplate.py:
549 use tar | tar to copy files in copy_pkg_to_chroot()
550 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
551
552 23 Oct 2005; Preston Cody <codeman@gentoo.org>
553 DEBUGGING ADDED TO AT. verbose field added to CConfig.
554
555 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
556 src/net/server/gliserv.py:
557 / maps to index.html
558 look for actual files in html/
559 src/net/html:
560 new template
561 src/GLIUtility.py:
562 added parse_vdb_contents()
563 src/GLIArchitectureTemplate.py:
564 added copy_pkg_to_chroot()
565 added debug code to dynamic-stage3
566 switch dynamic-stage3 to new method
567 lots of bug fixes from adding debug code
568
569 22 Oct 2005; Preston Cody <codeman@gentoo.org>
570 webgli initial bootloader support + changed make.conf.
571 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
572
573 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
574 src/GLIUtility.py:
575 horrible tangled mess of code that is tarball unpacking subprogress display
576 add unpack progress to portage snapshot
577 use read() instead of readlines() in spawn()
578 only update progress bar for whole percents
579
580 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
581 src/templates/x86ArchitectureTemplate.py:
582 change call to 'grub' to use GLIUtility.exitsuccess()
583 add definition of 'build_mode' in _configure_lilo()
584 src/misc/updategtkfe, src/misc/updateglid:
585 fix so subshell is called in root shell
586
587 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
588 src/net/server/handlers/WebGLIHandler.py:
589 stage screen launches URI browser in sized window with various properties set
590
591 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
592 src/misc/updategtkfe:
593 updated to actually work
594 remove previous snapshot and extracted dir before downloading
595 src/misc/updateglid:
596 updated to actually work
597 src/templates/x86ArchitectureTemplate.py:
598 fixed bug where grub code was looking for 'root+root+file_name2'
599
600 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
601 src/net/server/handlers/WebGLIHandler.py:
602 URI browser
603 added mirror selection
604 src/GLIUtility.py:
605 ls via ssh strips off ending *
606
607 16 Oct 2005; Preston Cody <codeman@gentoo.org>
608 more updates to webgli. stage selection.
609
610 11 Oct 2005; Preston Cody <codeman@gentoo.org>
611 updated webgli with preliminary Network Mounts support.
612
613 9 Oct 2005; Preston Cody <codeman@gentoo.org>
614 GenDialog: string formatting and yes/no label fixes.
615 added WebGLI template for gliserv.py
616 added WebGLIHandler as well as a definition for it in gliserv.py
617 updates to the webgli files even though they won't be there for long.
618 Utility: remove exception for non-existant grppkgs.txt until the new livecd
619 goes public.
620
621 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
622 src/net/server/gliserv.py:
623 override dict to not be so anal
624 main server now loads separate module to handle requests
625 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
626 split out profile URLs into separate handler function
627 move handlers into subdirectory
628 add Welcome and Clients handlers
629
630 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
631 src/GLIUtility.py:
632 raise exception if password prompt received twice
633
634 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
635 src/GLIUtility.py:
636 removed rot13ify()
637
638 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org>
639 src/net/server/gliserv.py:
640 allow for param to be passed multiple times in GET
641 no XMLRPC functions return None
642 modify POST request parsing to only create a list if needed
643 fix GET request parsing so the list creation for multiple values works
644 src/net/client/gliclient.py:
645 various typo and type mismatch fixes
646 exit after exception
647
648 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
649 src/net/client/gliclient.py:
650 initial commit
651 pass MAC to XMLRPC functions
652 src/net/server/GLIServerProfile.py:
653 rename GLIClientsProfiles to GLIServerProfile
654
655 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
656 src/net/server/gliserv.py:
657 now handles POST requests
658 move majority of request handling code to common_handler() to reduce code
659 duplication
660 profile loading
661 client reg via XMLRPC goes into SharedInfo()
662 /showclients redesign
663 template fixes
664 allow handler functions to add/change headers
665 save profile
666
667 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
668 src/net/server/GLIClientsProfiles.py:
669 initial commit
670 src/net/server/template.html:
671 initial commit
672 src/net/server/gliserv.py:
673 add template mojo
674
675 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
676 src/net/server/gliserv.py:
677 XMLRPC mojo
678
679 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
680 src/GLIArchitectureTemplate.py:
681 add code in _edit_config() to comment line where variable is defined
682 previously
683 insert new line under previous definition of variable if it exists
684 small _edit_config() cleanup
685 src/GLIStorageDevice.py:
686 add clear_partitions() function
687 new sizes for recommended partition layout
688 automatically calculate swap size for recommended layout
689
690 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
691 src/templates/x86ArchitectureTemplate.py:
692 fat16 mojo
693
694 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
695 src/GLIStorageDevice.py:
696 prevent do_recommended() from being run twice
697 rewrite do_recommended() to be more robust
698 src/GLIArchitectureTemplate.py:
699 rework _edit_config() to not write duplicate entries
700
701 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
702 src/GLIStorageDevice.py:
703 added do_recommended() function to automatically created 256M/1G/* layout
704
705 17 Sep 2005; Preston Cody <codeman@gentoo.org>
706 src/gli-dialog.py: added set_distcc to the list
707 GenDialog: added set_distcc. untested.
708 IP: added install_distcc flag.
709 AT: added install_distcc function based on the flag. runs after build_kernel
710 changed AT spawn command for distcc for nodeps.
711
712 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
713 src/GLIUtility.py:
714 add rot13ify() function
715
716 16 Sep 2005; Preston Cody <codeman@gentoo.org>
717 src/GenDialog.py
718 added a sentence of text. unchecking support added.
719
720 15 Sep 2005; Preston Cody <codeman@gentoo.org>
721 src/GLIUtility.py
722 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
723 src/GenDialog.py
724 still working on extra_packages. transformed the list to new format.
725 added GRP indication to list. untested.
726 TODO lists updated.
727 src/fe/dialog/gli-dialog.py
728 spelling mistook.
729
730 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
731 src/GLIUtility.py:
732 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
733
734 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
735 src/GLIUtility.py:
736 add get_directory_listing_from_uri()
737 add http support to above
738 add ftp support to above
739 add scp support to above
740 src/GLIArchitectureTemplate.py:
741 "0" instead of 0 for key of single-element dict passed to _edit_config()
742
743 5 Sep 2005; Preston Cody <codeman@gentoo.org>
744 value_only -> only_value
745
746 3 Sep 2005; Preston Cody <codeman@gentoo.org>
747 gutted out all of etc_portage structure since it is now all handled by
748 etc_files
749
750 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
751 src/GLIArchitectureTemplate.py:
752 install_packages() sends progress update notifications
753 src/templates/x86ArchitectureTemplate.py:
754 increase sleep to 5s between format tries
755 src/GLIClientController.py:
756 pass 'self' to AT instead of 'self._pretend'
757
758 2 Sep 2005; Preston Cody <codeman@gentoo.org>
759 logger -> logger.log in x86AT
760
761 1 Sep 2005; Preston Cody <codeman@gentoo.org>
762 added set_etc_portage to IP. debugging gli-d's support for it.
763
764 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org>
765 src/templates/x86ArchitectureTemplate.py:
766 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
767
768 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
769 src/GLIArchitectureTemplate.py:
770 add _portage_best_version() function and rework install_packages() to allow
771 for future X of Y tracking
772 Use best_visible instead of best_version
773 tracked down and fixed missing = causing empty install extra packages
774 use = when emerging also
775 quickpkg hokey pokey
776 run _get_packages_to_emerge() again with -pk
777
778 22 Aug 2005; Preston Cody <codeman@gentoo.org>
779 src/ArchTemplate: removed install_xorg_x11, and put the xorg.conf copying at
780 the end of install_packages.
781 added updateglid to /src/misc
782 updated all core files with new GPL notice and copyright statement.
783
784 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
785 src/GLIUtility.py:
786 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
787 a snapshot in /mnt/cdrom/snapshots/
788 get_snapshot_from_cd() adds file:// at the beginning
789 change calls to extra package special case functions to 'self.blah'
790
791 21 Aug 2005; Preston Cody <codeman@gentoo.org>
792 src/ArchTemplate: changed "voodoo".
793 changed order of portage sync methods. made a fallback to webrsync if
794 normal emerge sync fails.
795 removed get_sources_from_cd because it is obsolete.
796 add special cases to install_packages. remove fatal exception on package
797 install failure b/c the box will still be bootable.
798 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
799 handled in the FEs.
800 src/GenDialog: added a bunch of code for dealing with x11-based packages.
801 awaiting testing.
802
803 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
804 src/GLIStorageDevice.py:
805 global try/except block around fs resizable detection code
806 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
807 install-failed cleanup function
808
809 18 Aug 2005; Preston Cody <codeman@gentoo.org>
810 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
811
812 16 Aug 2005; Preston Cody <codeman@gentoo.org>
813 GLIGenDialog:
814 add drive choices for loaded configs.
815 force snapshot for dynamic_stage3
816 init the snapshoturi input to the cd snapshot if not already selected.
817 if dynamic_stage3, skip the make.conf step.
818 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
819 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
820
821 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
822 src/GLIArchitectureTemplate.py:
823 manually call MAKEDEV in stage3-dynamic code
824 copy /etc/inittab.old to /etc/inittab in chroot
825 src/GLIUtility.py:
826 add beginning of validate_uri() function
827 add file:/// support to validate_uri()
828 single quotes when setting livecd password
829
830 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
831 src/GLIGenDialog.py:
832 change getmountpoint() to get_mountpoint()
833 src/misc/updategtkfe:
834 committed script to automatically download latest snapshot and run gtkfe
835 src/templates/x86ArchitectureTemplate.py:
836 fix _configure_lilo_add_windows() for IP -> GLISD stuff
837 src/GLIArchitectureTemplate.py:
838 give tmp_minor an initial value in mount_local_partitions so that the value
839 remain from the previous drive
840
841 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
842 src/templates/x86ArchitectureTemplate.py:
843 Fix _configure_lilo() for IP using GLISD stuff
844 src/GLIArchitectureTemplate.py:
845 install_cron_daemon() treats "none" specially
846
847 14 Aug 2005; Preston Cody <codeman@gentoo.org>
848 old patch from Steven Mertens to resolve bug #96642
849 numerous asthetic changes to GenDialog, no real functionality changes though.
850 strings renamed for global use if necessary.
851 fix all three parts of bug 102291
852 disable set_etc_portage until fully-written.
853
854 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
855 src/GLIClientController.py:
856 lower-case http/ftp proxy envvars
857
858 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
859 src/GLIClientController.py:
860 log end of pre_install steps to aid in debugging
861 src/templates/x86ArchitectureTemplate.py:
862 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
863
864 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
865 src/GLIArchitectureTemplate.py
866 check to make sure that the device node we're wait for to exist isn't of
867 type 'free'
868
869 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
870 src/GLIGenDialog.py:
871 convert install_packages to list in set_extra_packages()
872 check return code of checklist() call in "Manual" section
873 *actually* fix the first problem
874
875 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
876 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
877 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
878
879 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
880 src/GLIArchitectureTemplate.py:
881 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
882
883 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org>
884 Add CDATA support to SimpleXMLParser and add utility functions for it.
885
886 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
887 src/GLIArchitectureTemplate.py:
888 Fix case where vixie-cron is specified as a full package atom, as we still
889 don't want to run 'crontab /etc/crontab' for it.
890
891 *GLI-0.1 (3 Aug 2005)
892
893 30 Jul 2005; Preston Cody <codeman@gentoo.org>
894 add scp to list of is_uri() so GenDialog doesn't complain.
895 fixed livecd-kernel bug in bootloader code.
896 fixed gendialog for dynamic_stage3 instead of "networkless"
897 change bootloader to allow for both initrd and initramfs.
898 fix IP for dynamic_stage3.
899 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
900
901 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
902 Added full scp:// URI support to get_uri() in GLIUtility
903 Remove "networkless" from dynamic stage3 if locic.
904 Remove print statement from scp:// code.
905 Change scp code to check for "assword: " instead of "Password:"
906 Fix post-install network code to create net.eth1+ symlink correctly
907 Check to make sure pkg can be split on / and some debugging code
908 Add 2>dev/null to emerge call in _get_packages_to_emerge()
909 SimpleXMLParser handles True/False/None correctly now
910 Comment out above fix
911 Add partitioning wait-for-device-to-exist code to mount_local_partitions
912
913 28 Jul 2005; Scott Myron <samyron@gentoo.org>
914 Removed a FIXME in the GLIClientConfiguration that is no
915 longer needed.
916
917 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
918 Default to x86 in ClientConfig
919 Typo in build-a-stage3 code.
920 Remove MAKEDEV call in build-a-stage3 postscript.
921
922 26 Jul 2005; Preston Cody <codeman@gentoo.org>
923 Rewrote init of IP for gli-d. Other GenDialog updates.
924 allow network_type to be None in CConfig.
925
926 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
927 Add _dynamic_stage3 option to IP.
928 Add check for that option to dynamic stage3 code in ArchTemplate.
929 Fix code to determine default route in get_eth_info() in GLIUtility.
930 Fix serialization of dns-servers in ClientConfig.
931
932 24 Jul 2005; Preston Cody <codeman@gentoo.org>
933 changed default values of cron/logger in IP.
934 moved GenDialog IP init out to the individual files. gli-dialog's version
935 will change quite a bit.
936
937 22 Jul 2005; Preston Cody <codeman@gentoo.org>
938 added ppcArchTemplate. blank now. working on yaboot.
939 modified ArchTemplate for amd64 and ppc custom kernels.
940 skeleton implementation of _configure_yaboot.
941 small fixes to other templates.
942
943 21 Jul 2005; Preston Cody <codeman@gentoo.org>
944 GenDialog updates. changed comment in IP.
945
946 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
947 src/GLIInstallProfile.py:
948 Fix codeman's screwup of changing the service seperator to ',' in the parser
949 without changing it in the serialization code! Also document this in a
950 comment so you find it easier. Everybody needs to make sure they update
951 their install profiles!
952
953 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
954 src/GLIArchitectureTemplate.py:
955 Fix casting of list to string and concat of None with string, as well as
956 commented prototype of checking that mounting actually worked (found a case
957 where mount can return success, but the mount won't be done).
958
959 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
960 src/templates/x86ArchitectureTemplate.py:
961 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
962 checking for the device, and sleeping 1 second each time.
963
964 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
965 src/templates/x86ArchitectureTemplate.py:
966 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
967 bootloader works again. Also rename _install_{grub,lilo} to
968 _configure_{grub,lilo} since they don't install the loaders anymore
969 themselves.
970
971 7 Jul 2005; Preston Cody <codeman@gentoo.org>
972 fix global USE flags to not include the arch types at the end.
973 updates to GenDialog and gli-d.
974
975 6 Jul 2005; Preston Cody <codeman@gentoo.org>
976 fixing bootloader code for no initrd and initrd->initramfs naming change.
977
978 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
979 Proper comments and parameters to GLIException in install_mta()
980 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
981 Add strip() to list_mirrors(), list_subarch_from_mirror() and
982 list_tarball_from_mirror() to eliminate blank last item.
983
984 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org>
985 Added stage3 generation code.
986
987 5 Jul 2005; Preston Cody <codeman@gentoo.org>
988 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
989 Mild changes to GenDialog.
990
991 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
992 Remove separate install step configure_rc_conf() since it's handled by
993 update_config_files()
994 Make a copy of newvalues in _edit_config() so quotes aren't added when the
995 function is called twice on the same file.
996
997 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
998 Missing \ in sed in _get_packages_to_emerge()
999 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1000 Check in _quickpkg_deps() to ignore blank package names returned from
1001 _get_packages_to_emerge()
1002
1003 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1004 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1005 in the dialog.py gauge code.
1006
1007 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1008 Add code to update_config_files() to go through etc_files and update stuff.
1009 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1010 Only use float() in partition xml parsing code if type == "free"
1011
1012 28 Jun 2005; Preston Cody <codeman@gentoo.org>
1013 finished almost all internationalization of GenDialog.
1014 attempt at fixing rc.conf function. moved 3 generate functions out of
1015 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1016 added dialog.py to the fe/dialog directory so it actually gets used.
1017
1018 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1019 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1020
1021 27 Jun 2005; Preston Cody <codeman@gentoo.org>
1022 fix extra entry in list_mirrors()
1023 beginning internationalization runthrough.
1024
1025 26 Jun 2005; Preston Cody <codeman@gentoo.org>
1026 added dialog.py to /src temporarily until it gets accepted upstream.
1027 fix for unused value in form in dialog.py and changed heights.
1028 fix GenDialog forms.
1029
1030 25 Jun 2005; Preston Cody <codeman@gentoo.org>
1031 Changed hostname/domainname for new baselayout.
1032 Changed _add_to_runlevel errors to logs.
1033 Updated TODO list to show status of GenDialog
1034 More updates to GenDialog including two checklists that probably won't work.
1035 update IP to use comma-separated list instead of space separated for services.
1036
1037 24 Jun 2005; Preston Cody <codeman@gentoo.org>
1038 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1039 GenDialog as it gets closer to completion.
1040
1041 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1042 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1043 instead of int() in add_partition_device_partition() for minor (closes 96804)
1044
1045 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1046 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1047 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1048 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1049
1050 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1051 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1052 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1053 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1054 Fix undefined variable 'output' issue in spawn().
1055
1056 20 Jun 2005; Preston Cody <codeman@gentoo.org>
1057 More updates to GenDialog and gli-d.
1058
1059 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1060 Modify list_mirrors() to return a list of mirror URL/name pairs.
1061
1062 19 Jun 2005; Preston Cody <codeman@gentoo.org>
1063 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1064 get subarch.
1065
1066 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1067 Backend partitioning will create disklabel is none exists. Installprofile
1068 defaults to "" now instead of "msdos" for disklabel type. Fix for
1069 mount_local_partitions() to remember device along with minor in the
1070 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1071 add else block to log unsupported netmount types to mount_network_shares()
1072
1073 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1074 src/GLIArchitectureTemplate.py:
1075 Refactor kernel_compile common stuff, fix 2.4 build process.
1076 src/fe/cli/clife.py:
1077 Logging system.
1078 src/GLIUtility.py, src/GLIStorageDevice.py:
1079 Add comments about re-writes needed for boxes without sysfs.
1080
1081 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1082 src/GLIArchitectureTemplate.py:
1083 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1084 'make dep' call for custom compile. build_mode support for prepare-only and
1085 none types completed. custom compile function chains shell functions in
1086 spawned script, to allow for catching all errors.
1087
1088 15 Jun 2005; Preston Cody <codeman@gentoo.org>
1089 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1090 and GenDialog. other gendialog updates as well. kernel updates untested.
1091
1092 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1093 src/GLIInstallProfile.py:
1094 Change structure of etc-portage stuff. The serialization was broken before my
1095 last commit, and I am the only person that's ever used it. The new schema is
1096 as follows:
1097 <etc-portage>
1098 <file name="package.mask"/>
1099 <file name="package.unmask">
1100 <entry atom="sys-kernel/openmosix-sources"/>
1101 </file>
1102 <file name="package.use">
1103 <entry atom="sys-libs/db">
1104 -java
1105 </entry>
1106 <entry atom="dev-libs/cyrus-sasl">
1107 -ldap
1108 </entry>
1109 </file>
1110 </etc-portage>
1111
1112
1113 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1114 src/GLIInstallProfile.py:
1115 Add new entry for gli-profile/kernel-build-method item. Add missing
1116 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1117 keys in the same order.
1118
1119 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1120 src/GLIArchitectureTemplate.py:
1121 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1122 was repeatedly appended to make.conf.
1123
1124 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1125 src/GLIArchitectureTemplate.py:
1126 Put some Linux-2.6 specific code under a if statement. Store list of
1127 successfully mounted swap device for using swapoff. Add proper error checking
1128 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1129 'file'. Clean up some redundant code (thanks to pychecker).'
1130
1131 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1132 Fix typos: get_extended() instead of get_extended_partition(). Added
1133 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1134 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1135
1136 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
1137 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1138 in add_network_interface.
1139
1140 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
1141 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1142 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1143 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1144 prepare_chroot.
1145
1146 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1147 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1148 +src/fe/installer-gtk:
1149 Add new automated CLI frontend. Add scripts that are the intended means to
1150 use each frontend.
1151
1152 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1153 src/GLIClientController.py:
1154 Add null type to network config, for cases where the interface is already up
1155 and should not be touched (netboot for example).
1156
1157 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1158 src/GLIArchitectureTemplate.py:
1159 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1160 string!. Try to use binary packages if available by default.
1161
1162 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1163 src/GLIArchitectureTemplate.py:
1164 More error checking for _add_to_runlevel, to ensure that the init script
1165 actually exists before we try to add it. set_services phase must take place
1166 after the package installation, otherwise the init scripts might not exist.
1167 Find the correct init script for the cron and logging daemons, and add that
1168 instead of the package atom.
1169
1170 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1171 src/GLIArchitectureTemplate.py:
1172 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1173 usage of 'file' to 'contents' for the variable name, as it shadows
1174 __builtin__.file.
1175
1176 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1177 src/GLIArchitectureTemplate.py:
1178 Add MTA install code, and include MTA install phase. Ensure
1179 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1180 for 'none' kernel config for build_kernel phase. Put kernel_script in
1181 /var/tmp instead of /root for build_kernel phase.
1182
1183 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1184 Rename mta variables to match syslog/cron variables.
1185
1186 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1187 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1188 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1189 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1190 src/templates/.cvsignore, src/tests/.cvsignore:
1191 Refactor partition formatting again to include error checking. Allow 'none'
1192 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1193
1194 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1195 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1196 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1197 only have a single spawn call.
1198
1199 11 Jun 2005; Preston Cody <codeman@gentoo.org>
1200 refixed samyron's fix of set_architecture_template.
1201
1202 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1203 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1204 be executable.
1205
1206 10 Jun 2005; Scott Myron <samyron@gentoo.org>
1207 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1208 error checking when you call set_architecture_template.
1209
1210 10 Jun 2005; Preston Cody <codeman@gentoo.org>
1211 moved the mkfsopts input to the partition options menu instead of the during
1212 the creation process. updated GenDialog to say it supports reiserfs v3.
1213
1214 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1215 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1216 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1217 Add support for other partition types to dialogfe.
1218 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1219 avoid integer overflows and wraparounds.
1220
1221 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1222 Removed start/end from XML output and added mkfsopts to partitioning info.
1223 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1224 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1225 in GLIClientConfiguration. Change from .1 and .9 to constants for
1226 partitioning. Fix free space overwriting bug. Remove a few unused functions
1227 from rewrite. Fix call to get_partition_at()
1228
1229 8 Jun 2005; Preston Cody <codeman@gentoo.org>
1230 Updates to GenDialog and dialogfe.
1231
1232 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1233 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1234
1235 6 Jun 2005; Preston Cody <codeman@gentoo.org>
1236 more GenDialog updates to partitioning.
1237
1238 5 Jun 2005; Preston Cody <codeman@gentoo.org>
1239 Indenting issue in GLISD/get_ordered_partition_list.
1240 updates to GenDialog partitioning and added default UTC for timezone in IP.
1241
1242 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1243 Added GLISD.get_model()
1244
1245 3 Jun 2005; Preston Cody <codeman@gentoo.org>
1246 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1247 More updates to GenDialog :)
1248
1249 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
1250 Added get_interface_realname() function.
1251
1252 2 Jun 2005; Preston Cody <codeman@gentoo.org>
1253 Added auto-save of CConfig and copying to new /root after install.
1254 yet even more GenDialog updates.
1255
1256 1 Jun 2005; Preston Cody <codeman@gentoo.org>
1257 removed print statement from GLISD. more updates to GenDialog.
1258
1259 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1260 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1261 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1262 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1263 places in GLIClientConfiguration.
1264
1265 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1266 Fix mount_local_partitions(), configure_fstab(), and
1267 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1268 A few more fixes for templates/x86Archtemplate
1269
1270 27 May 2005; Preston Cody <codeman@gentoo.org>
1271 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1272 a work in progress.
1273
1274 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1275 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1276 directly. GLISD can now handle data imported from XML.
1277
1278 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1279 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1280 handle blank (no disklabel) disks.
1281
1282 20 May 2005; Preston Cody <codeman@gentoo.org>
1283 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1284 up, documented, and separated out serialization and grouped all sections.
1285
1286 19 May 2005; Preston Cody <codeman@gentoo.org>
1287 Reorganization of ClientConfiguration and gutting of unused functions.
1288 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1289
1290 18 May 2005; Preston Cody <codeman@gentoo.org>
1291 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1292
1293 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1294 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1295 partitioning. CC serializes install profile to disk and prepare_chroot()
1296 copies it into /mnt/gentoo/root
1297
1298 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1299 Moved URI parsing into new function parse_uri()
1300
1301 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1302 Added XMLParser module.
1303
1304 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1305 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1306 Minor fix to is_uri() regex to allow hyphens in hostname.
1307
1308 12 May 2005; Preston Cody <codeman@gentoo.org>
1309 Updated finishing_cleanup for new unmounting method from agaffney.
1310
1311 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1312 Fix GLILogger to use correct time format string. Fix _edit_config() to
1313 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1314 unicode support to is_realstring().
1315
1316 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1317 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1318 return value instead of non-zero. Add code to output a traceback to the
1319 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1320 instead of --nocolor.
1321
1322 10 May 2005; Preston Cody <codeman@gentoo.org>
1323 Added GLIGenDialog.py to make a generic class for the dialog functions that
1324 can be used by both dialogfe and the netfe/be. updated both for new filename.
1325 date changes. 2004->2005.
1326
1327 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1328 Removed 'quiet=True' from spawn() calls
1329
1330 10 May 2005; Preston Cody <codeman@gentoo.org>
1331 Updated GLIUtility with patches from chotchki. Also added documentation
1332
1333 9 May 2005; Preston Cody <codeman@gentoo.org>
1334 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1335 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1336 from bug #89683, mostly touchups.
1337
1338 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1339 GLIStorageDevice cleanup patch from bug #91761
1340
1341 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1342 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1343 _edit_config(). Error logging casts 'error' to str
1344
1345 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1346 Exceptions received in CC are logged before being passed to the FE. Added
1347 code to CC to handle exceptions *not* thrown by the installer itself.
1348
1349 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
1350 get_max_mb_for_resize() returns -1 if not self.resizeable
1351
1352 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1353 More dirty rsync hacks :-/
1354
1355 29 Apr 2005; Preston Cody <codeman@gentoo.org>
1356 Patches from chotchki (bug #90325) to improve CC networking. untested.
1357
1358 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1359 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1360 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1361 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1362 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1363 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1364 _get_packages_to_emerge()
1365
1366 28 Apr 2005; Preston Cody <codeman@gentoo.org>
1367 Added group-adding code to set_users in ArchTemplate
1368
1369 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1370 Added post-install script code
1371
1372 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1373 Fixed encapsulation issues in GLIClientController (bug #90141)
1374
1375 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1376 Update resizing code in GLIStorageDevice
1377
1378 17 Apr 2005; Preston Cody <codeman@gentoo.org>
1379 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1380
1381 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1382 Reverted change to ArchTemplate and added support for commented line in old
1383 code.
1384
1385 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1386 Changed _edit_config() to modify value in-place instead of commenting out and
1387 adding the new value to the end of the file.
1388
1389 15 Apr 2005; Preston Cody <codeman@gentoo.org>
1390 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1391 Also updated TODO list.
1392
1393 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1394 Use blackace's one-liner to add comments for all function for use with
1395 pythondoc.
1396
1397 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1398 Moved 'end >= device_sectors' check out of loop to check for next partition's
1399 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1400 Partitioning code now tracks start/end of extended for placing logicals. End
1401 point of logical is now adjusted along with start.
1402
1403 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1404 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1405 the way of partitioning from a blank disk. Add int() around access to minor
1406 key in partition information due to new partition code leaving them as float.
1407
1408 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1409 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1410
1411 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1412 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1413
1414 8 Apr 2005; Scott Myron <samyron@gentoo.org>
1415 Added support for DHCP options and MAC addresses in the InstallProfile.
1416
1417 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
1418 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1419 sed to properly strip out junk.
1420
1421 2 Apr 2005; Preston Cody <codeman@gentoo.org>
1422 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1423 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1424
1425 31 Mar 2005; Preston Cody <codeman@gentoo.org>
1426 Fixed indent problem in GLICController
1427
1428 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1429 Check for disklabel type "loop" and use the device name without a minor.
1430
1431 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1432 Remove /tmp/compile_output.log and /var/log/install.log when install is
1433 complete. Added code to (hopefully) keep 2nd thread running after install.
1434 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1435 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1436 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1437
1438 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1439 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1440 when unpacking tarball.
1441
1442 28 Mar 2005; Preston Cody <codeman@gentoo.org>
1443 rewrote filesystem_tools. looks like it works so ripping out all the old
1444 filesystem_tools code.
1445
1446 26 Mar 2005; Preston Cody <codeman@gentoo.org>
1447 Changed the print statements to logging in the partitioning BE code.
1448 the logger may need to be imported to the x86archtemplate. unknown yet.
1449 Added the finishing_cleanup function.
1450 added a fix to the logger from BenUrban
1451
1452 25 Mar 2005; Preston Cody <codeman@gentoo.org>
1453 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1454 URIs. The blank uri check has been commented out.
1455 ripped out error checking of set_services. this is done by _add_to_runlevel.
1456
1457 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1458 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1459
1460 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1461 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1462 the install profile if available. Commented out spawn() debugging prints
1463
1464 23 Mar 2005; Preston Cody <codeman@gentoo.org>
1465 small changes to setup_network_post. moved adding to runlevel of net.x to
1466 after the device gets symlinked. added domainname runlevel command.
1467
1468 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1469 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1470 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1471 spawn() call in livecd-kernel code to pass environment variables.
1472 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1473 the install profile if available.
1474
1475 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1476 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1477 to handle installing the livecd kernel into the new system.
1478
1479 22 Mar 2005; Preston Cody <codeman@gentoo.org>
1480 should emerge hotplug and coldplug before adding them to runlevel.
1481
1482 21 Mar 2005; Preston Cody <codeman@gentoo.org>
1483 took chroot out of grub_install command.
1484
1485 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1486 Changed chroot wrapper code in spawn() to write the wrapper the python way
1487 instead of the bash way to avoid quote conflicts. Added
1488 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1489 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1490 as it breaks the piping.
1491
1492 20 Mar 2005; Preston Cody <codeman@gentoo.org>
1493 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1494
1495 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1496 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1497 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1498 GLIInstallProfile.
1499
1500 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1501 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1502 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1503 into /mnt/gentoo in prepare_chroot()
1504
1505 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1506 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1507 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1508 to start/end sectors
1509
1510 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1511 Add 2>&1 to cmd in spawn()
1512
1513 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1514 Modified GLIUtility.exitsuccess() to work with return value from
1515 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1516 creates wrapper script for commands run inside chroot so multiple commands
1517 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1518 for the generated script from spawn()
1519
1520 16 Mar 2005; Preston Cody <codeman@gentoo.org>
1521 Removed default values for stage tarball URI and portage tree URI from
1522 InstallProfile. These should be set by the FEs. also added services step to
1523 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1524 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1525
1526 14 Mar 2005; Preston Cody <codeman@gentoo.org>
1527 Small fix for setting the default gateway. Also added feature to dialogfe.
1528
1529 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1530 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1531
1532 1 Mar 2005; Preston Cody <codeman@gentoo.org>
1533 Fixed a bunch of true -> True typos. lots of em
1534 only write new resolv.conf if there are dns servers listed.
1535
1536 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
1537 Commented out 'display_on_tty8=True' in start_portmap()
1538
1539 18 Feb 2005; Preston Cody <codeman@gentoo.org>
1540 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1541
1542 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1543 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1544 lang parameter to __init__()
1545
1546 10 Feb 2005; Preston Cody <codeman@gentoo.org>
1547 updates to TODO list.
1548
1549 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1550 Initial code for quickpkg GRP support. Fix loop to grab packages from
1551 'emerge -p blah'
1552
1553 6 Feb 2005; Preston Cody <codeman@gentoo.org>
1554 check for dhcp in the network stuff and emerge it if it is.
1555 added quickpkg to TODO list
1556
1557 5 Feb 2005; Preston Cody <codeman@gentoo.org>
1558 Changed the raising of 'warning' exceptions to a simple log of the error
1559 so that the installer can continue.
1560
1561 3 Feb 2005; Preston Cody <codeman@gentoo.org>
1562 Some big changes. First, changed most output to display_on_tty8.
1563 Second, added log lines to all templates. Some smaller fixes such as typos.
1564 Also did some cleanups of old commented lines.
1565
1566 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
1567 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1568 Undo change with fix. Escaping fix in GLIStorageDevice.py
1569
1570 31 Jan 2005; Preston Cody <codeman@gentoo.org>
1571 more updates to TODO list. hopefully we'll soon start removing items instead
1572 of adding them.
1573
1574 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1575 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1576
1577 27 Jan 2005; Preston Cody <codeman@gentoo.org>
1578 updated TODO list. (again)
1579
1580 25 Jan 2005; Preston Cody <codeman@gentoo.org>
1581 changed output of portmap start to display_on_tty8.
1582 fixed bootloader for udev and multiple kernels
1583 fixed custom kernel config (again)
1584
1585 22 Jan 2005; Preston Cody <codeman@gentoo.org>
1586 changed default value of CC._enable_ssh to True because this is smart.
1587 added code to allow custom kernel .config. may be unstable and break. sorry.
1588
1589 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1590 partition() now waits until after it checks for partition flags before delete
1591 the partitions :P
1592
1593 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1594 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1595 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1596 blank.
1597
1598 19 Jan 2005; Preston Cody <codeman@gentoo.org>
1599 Various fixes related to the add_users function. Still not yet finished.
1600 Added things to the TODO list. Lets start using that!
1601
1602 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1603 Added code to x86Template to format newly created partitions. Also added
1604 some error checking code. GLIStorageDevice passes 'minor' with data to
1605 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1606 mounting code.
1607
1608 18 Jan 2005; Preston Cody <codeman@gentoo.org>
1609 Took out unnecessary setting of random livecd root password. the cd already
1610 sets it randomly.
1611
1612 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1613 Took out an unneeded step from CC's run()
1614
1615 15 Jan 2005; Preston Cody <codeman@gentoo.org>
1616 Attempt at detecting and adding windows partitions to lilo.
1617
1618 14 Jan 2005; Preston Cody <codeman@gentoo.org>
1619 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1620 partition. fixed misc exit_status => exitstatus typo.
1621
1622 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1623 Added basic code for resizing filesystems with pyparted. Fixed code for
1624 resizing ntfs and ext2/3.
1625
1626 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1627 Fixed partition() in x86Template so that it scans through logicals and deletes
1628 before deleting containing extended partition. Also clears partition table to
1629 be safe before third pass.
1630
1631 08 Jan 2005; Preston Cody <codeman@gentoo.org>
1632 Added mount_network_shares. not able to test it from this computer.
1633 will test when i get back to school.
1634 also added start_portmap to the client_controller as an always-do.
1635 agaffney says this is needed for NFS mounts to work.
1636
1637 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1638 Partial rewrite of partitioning code in x86Template. No longer shells out to
1639 parted to perform actions, now uses all pyparted calls. Code "works" in a
1640 test, but still needs lots of TLC. Also modified tests/install.py to work
1641 with x86Template and GLIClientConfiguration.
1642
1643 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1644 Initial move of partitioning code from ArchTemplate to x86Template.
1645
1646 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1647 Added grp_install and services to InstallProfile. forgot about the set_root_password
1648
1649 07 Jan 2005; Preston Cody <codeman@gentoo.org>
1650 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
1651 Test Install ran very well (skipping partitioning).
1652
1653 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1654 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
1655 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
1656 some may still have eluded me.
1657
1658 05 Jan 2005; Preston Cody <codeman@gentoo.org>
1659 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
1660 Just finished mount_local_partitions in GLIArchitectureTemplate
1661
1662 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1663 Added get_num_sectors() to GLIStorageDevice.
1664
1665 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
1666 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
1667 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1668 from GLIInstallProfile.
1669
1670 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1671 GLIStorageDevice returns "unknown" instead of "" for get_type()
1672
1673 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1674 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1675 actually work. Commented out resizability checking code for speed.
1676
1677 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1678 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
1679 GLIStorageDevice at the suggestion of plors
1680
1681 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1682 Added a function to GLIUtility to pull a value from a make.conf-style config
1683 file. Minor type fix to GLIInstallProfile.py
1684
1685 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
1686 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
1687 network mounts from partition data structure in GLIInstallProfile
1688
1689 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
1690 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1691 can be resized.
1692
1693 27 Oct 2004; Preston Cody <codeman@gentoo.org>
1694 Added some of the final functions to GLIInstallTemplate.
1695 Yes this project is still active despite rare use of the Changelog!
1696
1697 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1698 Added the GLIPartitionTools.py file. This is a temporary insertion of
1699 partitioning tools that will eventually go into their own package.
1700
1701 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1702 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
1703 for the program). Added __init__(install_profile, client_configuration) to
1704 GLI.InstallProfile. This sets install_profile and client_configuration once so as
1705 to avoid constantly passing stuff every time we call a method.
1706
1707 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1708
1709 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
1710 files without messing up all the other stuff in them. This will be used for making
1711 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1712
1713 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
1714
1715 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
1716 have a few basic things. I added two private methods. One is _depends(). This
1717 will be used for dependency checking (ie. unpacking a tarball requires that
1718 partitioning has been done). The other is _exec_in_chroot(). This is the exact
1719 same syntax as os.system(), however, instead of being run in the liveCD
1720 environment, it runs in the chroot. This requires a bit of fork() magic, so I
1721 isolated the code. Hope to work more this week to get this class formed...
1722
1723 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
1724
1725 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
1726 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
1727 to allow for easier modification (mutable, rather than immutable objects). Updated
1728 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
1729 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
1730 Added initial unit test code.
1731
1732 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
1733
1734 Added initial changelog. Setting up the basic structure of the CVS repository
1735 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1736 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20