/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 1489 - (show annotations) (download)
Fri Aug 4 03:14:15 2006 UTC (8 years, 11 months ago) by agaffney
File size: 80462 byte(s)
update Changelog to reflect 0.4 release

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005-2006 Gentoo Foundation; Distributed under the GPL v2
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.670 2006/08/04 03:14:15 agaffney Exp $
4
5 *GLI-0.4 (31 Jul 2006)
6
7 31 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
8 Finally properly fixing the installer script. Thanks to Andrew Gaffney for
9 doing the testing and coming up with the patch.
10
11 29 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
12 src/GLIArchitectureTemplate.py:
13 skip blank entries/files in update_config_files()
14
15 28 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
16 src/templates/x86ArchitectureTemplate.py:
17 move logical clipping logic a bit
18
19 27 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
20 I've commented out most of the code that used launch. It wasn't working and
21 we don't have the time to fix it before the release. I'll look into it after
22 the release and make it more robust and flexible.
23
24 27 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>
25 src/templates/x86ArchitectureTemplate.py:
26 clip logical partition at end of extended
27
28 20 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org>
29 src/GLIInstallProfile.py:
30 Added a few more applications to the list of extra packages to be merged,
31 all from various GRP sets.
32
33 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
34 Added launch variable to the end of each try-run with auth, which should
35 cause this to function properly. Of course, more testing is needed.
36
37 19 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
38 Fix a missed space in the installer script.
39
40 30 Jul 2006; Preston Cody <codeman@gentoo.org>:
41 src/GLIClientConfiguration.py:
42 adding 'None' with capital N so that the frontends can parse the network type
43
44 17 Jul 2006; Andrew Gaffney <agaffney@gentoo.org>:
45 src/GLIClientController.py:
46 log version-stamp
47
48 13 Jul 2006; Chris Gianelloni <wolf31o2@gentoo.org> bin/installer:
49 Updated the installer script to allow specifying the front-end to run from
50 the command line. Currently, it only supports dialog and gtk. It still needs
51 some testing, however.
52
53 9 July 2006; Preston Cody <codeman@gentoo.org>
54 src/GLIGenDialog.py:
55 make lilo only show up for x86 if non-networkless
56
57 25 Jun 2006; Preston Cody <codeman@gentoo.org>
58 src/GLIGenDialog.py:
59 adding code to auto-add doscsi if a scsi drive detected.
60 this code is also in the gtkfe already
61
62 24 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
63 src/GLIPortage.py:
64 pass proper PORTAGE_TMPDIR
65
66 17 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
67 src/GLIUtility.py:
68 fix list_mirrors() to ignore <uri> lines that don't end on the same line
69
70 17 Jun 2006; Preston Cody <codeman@gentoo.org> :
71 Added code to the mta step in AT to parse the install packages list and
72 look for mtas and if it finds it emerge it.
73 Initial attempt at moving extra_packages early in the setup to only show
74 local USE flags relating to those packages.
75 .. abandoned local USE project. no right way to do it.
76
77 9 Jun 2006; Andrew Gaffney <agaffney@gentoo.org>
78 src/GLIUtility.py:
79 minor tweak to regex for parsing mirrors.xml
80
81 23 May 2006; Andrew Gaffney <agaffney@gentoo.org>
82 src/templates/x86ArchitectureTemplate.py:
83 make use of strict_start and strict_end in partition recreation
84
85 15 May 2006; Andrew Gaffney <agaffney@gentoo.org>
86 src/templates/x86ArchitectureTemplate.py:
87 add strict_start and strict_end parameters to _add_partition()
88 add _find_current_minor_for_part() function to help with resizing
89 fix logical/extended logic in _partition_delete_step()
90 in _partition_resize_step(), delete, recreate at new size, resize, delete
91 call resize2fs with no size argument so it fills entire partition
92 more logging
93 only delete, recreate, resize, delete if growing
94 pass new size to resize2fs in K
95
96 9 May 2006; Andrew Gaffney <agaffney@gentoo.org>
97 src/GLIStorageDevice.py:
98 call reorder_minors() from tidy_partitions() instead of
99 set_partitions_from_disk()
100 add code to reorder_minors() to take extended/logical into consideration with
101 non-free partitions
102
103 30 Apr 2006; Preston Cody <codeman@gentoo.org> :
104 added a check of the length of the directory in /usr/src if under 6 characters
105 should fix bug 131809
106
107 19 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
108 src/GLIArchitectureTemplate.py:
109 automatically emerge splashutils and splash-themes-livecd if kernel_bootsplash
110 and livecd-kernel
111
112 16 Apr 2006; Preston Cody <codeman@gentoo.org>
113 src/GLIGenDialog.py:
114 change temp_use="-* " to temp_use="" because apparantly it's a bad idea to -*
115
116 15 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
117 src/GLIInstallProfile.py:
118 change kernel-modules to not be so stupid
119
120 9 Apr 2006; Preston Cody <codeman@gentoo.org> :
121 GLIMD: fix display problem with execute.pyhtml.
122 make tables better.
123
124 8 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
125 src/GLIInstallProfile.py:
126 fix handling of int/float for minor
127 src/templates/x86ArchitectureTemplate.py:
128 save/restore partition name
129 src/GLIStorageDevice.py:
130 support for partition name
131
132 8 Apr 2006; Preston Cody <codeman@gentoo.org> :
133 touchups to add_profile in GLIMD to link to webgli
134 add a save to GLIMD profile button in webgli's saveprofile
135 gliserv.py:
136 initial attempt at custom networking info per client. hostname support only.
137
138 5 Apr 2006; Andrew Gaffney <agaffney@gentoo.org> :
139 src/net/server/html/webgli/partitioning[234].pyhtml:
140 small fixes for new partioning code
141
142 2 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
143 src/GLIClientController.py:
144 record PID of secondary thread
145
146 1 Apr 2006; Andrew Gaffney <agaffney@gentoo.org>
147 src/GLIGenDialog.py:
148 small fix for new partitioning code
149
150 30 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
151 src/GLIStorageDevice.py:
152 add get_devnode()
153 fix up detect_devices() to detect cciss/ida arrays
154 src/templates/x86ArchitectureTemplate.py:
155 use get_devnode() instead of figuring out the devnode
156 skip first 3 steps if partition layout hasn't changed
157 wipe disk and create new disklabel before recreating partitions
158 src/GLIArchitectureTemplate.py:
159 use get_devnode() in local mount and fstab stuff
160
161 26 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
162 src/GLIStorageDevice.py:
163 change detect_devices() to handle change in sysfs in 2.6.16 (from lxnay)
164
165 25 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
166 src/templates/x86ArchitectureTemplate.py:
167 continue breakup/cleanup of partitioning code
168
169 24 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
170 src/GLIStorageDevice.py:
171 set disklabel to default for arch when clearing the partition table
172 src/templates/x86ArchitectureTemplate.py:
173 complete rewrite of first and second passes
174
175 22 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
176 src/GLIStorageDevice.py, src/templates/x86ArchitectureTemplate.py:
177 allow iterating over Device object to get partitions
178
179 21 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
180 src/GLIStorageDevice.py:
181 allow access to Device object like a dict
182
183 20 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
184 src/GLIStorageDevice.py:
185 allow access to Partition object like a dict
186
187 16 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
188 src/templates/x86ArchitectureTemplate.py:
189 fail if any filesystems are mounted on the device being partitioned
190
191 14 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
192 src/GLIStorageDevice.py:
193 reorder minor numbers when loading partitions from disk to match the physical
194 partition order
195
196 13 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
197 src/GLIStorageDevice.py:
198 overhaul for supporting mac disklabels and partitions out of disk order
199 remove free space from inside extended partition when extended is removed
200
201 13 Mar 2006; Chris Gianelloni <wolf31o2@gentoo.org> +bin/installer,
202 +bin/installer-dialog, +bin/installer-gtk, +docs/gli.png,
203 +docs/gli-dialog.png, +src/misc/installer-dialog.desktop,
204 +src/misc/installer-faq.desktop, +src/misc/installer-gtk.desktop:
205 Added bash scripts, icons, and desktop entries from the ebuild to make my
206 life easier.
207
208 10 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
209 src/GLIStorageDevice.py:
210 raise an exception if the existing partitions are out of disk order
211 look for minors out of order instead of disk position
212
213 8 Mar 2006; Preston Cody <codeman@gentoo.org> :
214 src/fe/dialog/gli-dialog and src/GLIGenDialog:
215 added networkless mode to gli-dialog.
216
217 6 Mar 2006; Preston Cody <codeman@gentoo.org> :
218 src/templates/x86AT:
219 add windows detection code for grub. untested.
220
221 6 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
222 src/templates/x86ArchitectureTemplate.py:
223 bootloader and partitioning external commands log to compile_output.log
224 wait for device node to exist before resizing
225 add -v to ntfsresize command
226 src/GLIStorageDevice.py:
227 return start/end with ip structure
228 pad min ntfs size by 50 MB just to be safe
229 src/GLIArchitectureTemplate.py:
230 only install filesystem tools for partitions with a mountpoint
231
232 5 Mar 2006; Preston Cody <codeman@gentoo.org> :
233 add error catching and text to saving profile dialogs
234
235 4 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
236 src/GLIPortage.py:
237 create /tmp, /var/tmp, and /var/lib/portage with proper permissions
238 src/templates/x86ArchitectureTemplate.py:
239 fix checks for changed partitions so they will actually get deleted
240
241 3 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
242 src/GLIClientController.py:
243 slightly better error handling for pre-install failures
244
245 2 Mar 2006; Andrew Gaffney <agaffney@gentoo.org>
246 src/templates/x86ArchitectureTemplate.py:
247 proper return code checking for ext2/3 resizing
248
249 28 Feb 2006; Andrew Gaffney <agaffney@gentoo.org>
250 src/GLIClientController.py:
251 accept 'none' as well as 'null' for network type
252 src/GLIArchitectureTemplate.py:
253 ignore extended partitions in mount_local_partitions()
254 src/templates/x86ArchitectureTemplate.py:
255 use get_ordered_partition_list() instead of keys().sort() for new_part_list
256 check to make sure start sector for primary isn't less than end sector for
257 previous extended
258 src/GLIClientController.py:
259 write dns servers to /etc/resolv.conf
260
261 27 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
262 src/GLIPortage.py:
263 copy_pkg_to_chroot() uses compile_output.log for command output
264
265 23 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
266 only keep a 1000 line 'scrollback' buffer for the compile output and log file
267
268 20 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
269 src/GLIPortage.py:
270 add code make GLIPortage.py capable of being run stand-along for dynamic
271 stage3 generation and copying packages in a GRP-ish way
272 grp code fixups
273
274 17 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
275 src/GLIPortage.py:
276 ignore blank packages passed to get_deps() and emerge()
277
278 14 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
279 src/GLIUtility.py:
280 add get_chosts() function
281
282 *GLI-0.3 (12 Feb 2006)
283
284 12 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
285 src/templates/x86ArchitectureTemplate.py:
286 pull old start/end sector values from somewhere that actually has them
287 add logic for extended partition to code that makes sure new end sector
288 doesn't overlap start sector of next partitions
289 don't freak out if partition can't be deleted
290
291 11 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
292 src/GLIPortage.py:
293 run env-update at the end of copy_pkg_to_chroot()
294
295 10 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
296 src/templates/x86ArchitectureTemplate.py:
297 I'm a complete fscking dumbass. I recorded the end sector for partitions that
298 weren't being touched, but I never used it when recreating them...the end was
299 calculated from the size in MB instead :/
300
301 9 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
302 src/GLIArchitectureTemplate.py:
303 pre-create /lib64 dir and /lib -> /lib64 symlink if it exists on livecd
304 copy /etc/{passwd,group,shadow} from livecd to chroot sans 'gentoo'
305 src/GLIPortage.py:
306 use tar to transfer files from image dir to /mnt/gentoo instead of 'cp -a'
307 src/GLIStorageDevice.py,src/GLIInstallProfile.py,src/templates/x86AT.py:
308 'resized' flag
309
310 8 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
311 src/GLIPortage.py:
312 short circuit and check vdb directly if package begins with '='
313
314 8 Feb 2006; Preston Cody <codeman@gentoo.org> :
315 added more packages to extra_packages list in IP
316
317 6 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
318 src/templates/x86ArchitectureTemplate.py:
319 10 tries to create filesystem instead of 3
320 src/GLIPortage, src/GLIArchitectureTemplate.py:
321 ignore_missing flag for copy_pkg_to_chroot()
322
323 5 Feb 2006; Andrew Gaffney <agaffney@gentoo.org> :
324 src/GLIPortage.py:
325 copy_pkg_to_chroot() uses $ROOT/vdb for ROOT= installs
326
327 26 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
328 src/net/server/gliserv.py:
329 fix handling of 404 for real files
330 src/net/server/GLIServerProfile.py:
331 look for 'hostname' in attributes instead of 'name'
332
333 22 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
334 src/SimpleXMLParser.py:
335 initial support for 'include' in XML files
336 src/GLIStorageDevice.py:
337 initial support for %
338 src/GLIClientController.py:
339 add debugging statements to pre-install steps
340
341 15 Jan 2006; Preston Cody <codeman@gentoo.org> :
342 webgli/configfiles:
343 check for key in etc_files['rc.conf'] to fix key error
344 webgli/timezone: small fix.
345 webgli/extrapackages: list-type fix
346 webgli/services: same
347 glimd: add/edit_client updates.
348
349 12 Jan 2006; Preston Cody <codeman@gentoo.org> :
350 added configure.pyhtml to glimd. minor changes
351 to top and add_client. fixed up showargs.
352 added execute.pyhtml
353 changed register clients line in gliserv for name->hostname.
354 updated TODO.
355
356 10 Jan 2006; Preston Cody <codeman@gentoo.org> :
357 src/net/server/*:
358 added add/del/edit client/profile.pythml for glimd.
359 updated templates, showclients, and gliserv.
360
361 10 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
362 src/net/server/*:
363 stupid threading module...
364
365 8 Jan 2006; Preston Cody <codeman@gentoo.org> :
366 AT: rc.conf -> conf.d/clock
367
368 7 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
369 src/GLIPortage.py:
370 show 'Calculating dependencies for ...' in subprogress bar at beginning of
371 emerge()
372 src/GLIArchitectureTemplate.py:
373 copy /etc/X11/gdm/gdm.conf.old into chroot if /etc/X11/gdm/gdm.conf exists
374 in the chroot
375 remove _quickpkg_deps() and _portage_best_{visible,version}()
376 src/GLIUtility.py:
377 fail immediately in validate_uri() if provided URI can't be parsed
378 modify fetch_and_unpack_tarball() and get_uri() to allow fetch subprogress
379 debug code in spawn()
380 use lower-level os.read() instead of file.read() because python sucks
381 src/templates/x86ArchitectureTemplate.py:
382 basic subprogress reporting for partitioning
383 total_steps was 1 too high
384
385 6 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
386 src/GLIUtility.py:
387 move parse_vdb_contents() to GLIPortage
388 src/GLIPortage.py:
389 remove all symlink fixups
390 ignore 'dir' entries in CONTENTS
391 call tar with -p
392
393 5 Jan 2006; Preston Cody <codeman@gentoo.org> :
394 AT: bootsplash is now gensplash
395 gliserv: add advanced_mode to shared_info
396 webgli: Added advanced mode. mostly just disables a few screens.
397
398 2 Jan 2006; Andrew Gaffney <agaffney@gentoo.org> :
399 src/GLIPortage.py:
400 get_deps() calls 'emerge -p' and then removed packages that aren't in vdb
401 added emerge()
402 update sub-progress after each package is emerged
403 skip tar, symlink fixup, and copy from image dir to / if no files in CONTENTS
404 call get_best_version_vdb() instead of get_best_version_vdb_chroot()
405 remove link if it exists before moving content into place
406 src/GLIArchitectureTemplate.py:
407 install_packages() now calls emerge() in GLIPortage
408 change all calls to self._emerge() to self._portage.emerge()
409 comment out all emerge status checking...using exceptions now
410 call copy_pkg_to_chroot() directly for livecd-kernel
411
412 31 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
413 src/GLIArchitectureTemplate.py:
414 remove add_pkg_to_world() and copy_pkg_to_chroot()
415 copy installer.log to installer.log.failed on install failure
416 src/GLIUtility.py:
417 added get_keymaps()
418 spawn() takes any False argument for chroot instead of just None
419 src/GLIPortage.py:
420 copy_pkg_to_chroot() chroot's to run ebuild is use_root=False
421 change copy_pkg_to_chroot() to work properly with use_root=False
422 figure PORTAGE_TMPDIR properly
423
424 27 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
425 src/net/server/html/*:
426 converted showclients, load/saveprofile
427
428 26 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
429 src/GLIPortage.py:
430 exclude packages already in chroot vdb from binary deplist
431 chroot to use best_version for chroot's vdb
432 src/runtimedeps.py:
433 accept ROOT via commandline instead of env
434
435 25 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
436 src/runtimedeps.py:
437 remove passing of ROOT
438 src/GLIPortage.py:
439 modify get_deps() to get deptree for each package and merge into final list
440 remove depgraph class
441 add debugging code to get_deps()
442 src/GLIArchitectureTemplate.py:
443 combine code for GRP/compile in install_packages() into one block
444 debugging code in install_packages()
445
446 24 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
447 src/runtimedeps.py:
448 initial commit
449 src/GLIPortage.py:
450 use separate script for GRP deps
451 remove calls to portage module
452
453 23 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
454 src/GLIPortage.py:
455 initial commit
456 move some of portage function from GLIAT
457 flipped around a few function args
458 src/GLIArchitectureTemplate.py:
459 revamp install_packages() for new GLIPortage
460
461 21 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
462 src/GLIArchitectureTemplate.py:
463 extract /usr/livecd/metadata.tar.bz2 to chroot if it exists
464
465 20 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
466 src/net/server/gliserv.py:
467 wrap generated code in a class to isolate it a bit better
468 302 redirects work
469 don't use cgi.escape() for <% %>
470 src/net/server/html/webgli/*:
471 load/save profile
472 src/GLIUtility.py:
473 change /sbin/lspci to just lspci
474
475 18 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
476 src/GLIClientController.py:
477 change ordering of statements in CC run() while loop to not go past the end
478 of the array
479 src/GLIArchitectureTemplate.py:
480 removed redundant bind mounts
481
482 18 Dec 2005; Preston Cody <codeman@gentoo.org> :
483 REMOVED dialogfe.py since it is totally obsolete. use gli-dialog.py
484 added a diagram by blackace from last night.
485 added the glossary in RTF format.
486
487 17 Dec 2005; Preston Cody <codeman@gentoo.org> :
488 x86AT: separated out emerge/configure from running of bootloader
489 added MBR drive support to lilo.
490 these changes will likely not work.
491 AT: added setup_and_run_bootloader step.
492
493 12 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
494 src/net/server/gliserv.py:
495 call generated code in a function
496 src/net/server/html/webgli/*:
497 include top/bottom
498 src/GLIArchitectureTemplate.py, src/GLIClientController.py,
499 src/GLIClientCongifuration.py:
500 install mode magic
501
502 11 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
503 src/GLIClientController.py:
504 use GLIException when there's an import problem
505 added debug code to show install_steps
506 src/templates/amd64ArchitectureTemplate.py:
507 add . to import path
508 proper path this time: ../../templates
509 src/GLIArchitectureTemplate.py:
510 add _portage_best_version() function
511
512 11 Dec 2005; Preston Cody <codeman@gentoo.org> :
513 added initial glossary and gimli diagram to the docs directory.
514 modify gli-dialog to allow editing of the install_profile after loading XML.
515
516 8 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
517 src/net/server/html/webgli/:
518 converted globaluse, localuse, networkmounts, portagetree, and stageselection
519 moved saveclientconfig stuff into clientconfig
520 moved saveconfigfiles into config files
521 converted etc_portage and makedotconf
522 converted bootloader and kernel
523 convert daemons, extrapackages, networking, review, services, timezone, users
524 src/net/server/gliserv.py:
525 proper 404 handling for .pyhtml extension
526 HTML escape <% %> stuff
527 work around python's sucky regexes
528 src/GLIInstallProfile.py:
529 allow set_{rsync,ftp,http}_proxy() to accept empty values
530
531 7 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
532 src/net/server/gliserv.py:
533 initial commit of Legolas templating engine
534 302 redirects
535 src/net/server/html/index.html, src/net/server/webgli_template.html:
536 minor changes for new code
537 src/net/server/html/*.pyhtml, src/net/server/html/webgli/*.pyhtml:
538 initial commit of the conversion from the monolithic WebGLIHandler.py to the
539 one file per path Legolas goodness
540 partitioning[2-4] done
541
542 5 Dec 2005; Preston Cody <codeman@gentoo.org> :
543 webgli: dhcp options in CC and post-install.
544 updated comparison chart.
545 webgli: etc/portage/* and distcc support added. not too-well tested.
546
547 4 Dec 2005; Preston Cody <codeman@gentoo.org> :
548 webgli_template.html: valign=top on left side.
549 webgli: fix bootloader boot_device. now working.
550 webgli: CC proxy done. post-install proxy in progress.
551
552 3 Dec 2005; Andrew Gaffney <agaffney@gentoo.org> :
553 src/net/server/webgli_template.html:
554 increase padding for content cell to 7px and add colspan=2
555
556 3 Dec 2005; Nicholas D. Wolfood <blackace@gentoo.org> :
557 webgli: added graphic bar on top
558 webgli: added hover effects on the links on the left
559 webgli: re-rendered header_bg.png to stretch without artifacts
560
561 3 Dec 2005; Preston Cody <codeman@gentoo.org> :
562 webgli: make.conf disabling fixes for dynamic_stage3
563 fixed portage snapshot browse popup
564 all changes tested.
565 webgli: add debug mode to CC screen. the screen still needs lots of work.
566
567 1 Dec 2005; Preston Cody <codeman@gentoo.org> :
568 added debug mode question to gli-dialog
569 added CC proxies to CC networking for gli-dialog
570 webgli: fixed skip CC networking if connection active
571 webgli: portage snapshot defaults to CD
572 webgli: bootloader mbr drive selection
573 webgli: USE flags unselectable if dynamic_stage3
574 webgli: manual extra packages and save button.
575
576 28 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
577 src/GLIUtility.py:
578 change ping count to 2
579 docs/comparison.html
580 initial commit
581
582 27 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
583 src/templates/x86ArchitectureTemplate.py:
584 fix map() issue with grub code
585 replace kernel_names and initrd_names loops with one-liners
586
587 27 Nov 2005; Preston Cody <codeman@gentoo.org> :
588 gli-dialog won't let you dynamic stage3 without systempkgs.txt.
589 initial gli-dialog support for recommended partitioning layout and clear.
590 failure cleanup now an option for gli-dialog.
591 move livecd-kernel to top of kernel lists. fix proto bug in rc.conf
592 added comparison list and updated TODO!
593
594 26 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
595 src/GLIArchitectureTemplate.py:
596 fix to stage1() debug code
597 fix to stage2() debug code
598
599 26 Nov 2005; Preston Cody <codeman@gentoo.org> :
600 some more bootloader code fixes. forgot boot_device != mbr_device.
601
602 25 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
603 src/GLIStorageDevice.py:
604 fix to unallocated space merging when last one is after part 4
605
606 24 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
607 src/GLIArchitectureTemplate.py:
608 small fix to debugging code in copy_pkg_to_chroot()
609
610 23 Nov 2005; Preston Cody <codeman@gentoo.org> :
611 more bugfixes with bootloader code
612 gli-dialog side appears to work
613
614 21 Nov 2005; Preston Cody <codeman@gentoo.org> :
615 initial adding of boot_device to backend.
616 initial boot_device support added to gli-dialog.
617 some fixes of my poor coding
618
619 20 Nov 2005; Preston Cody <codeman@gentoo.org> :
620 converted gli-dialog to use the install_package_list.
621 gtkfe has already been converted by AllanonJL
622 new way working in gli-dialog now and added to webgli.
623 added set/get_boot_device() to IP
624
625 19 Nov 2005; Preston Cody <codeman@gentoo.org> :
626 get_install_package_list added to InstallProfile. This can be used by the FEs
627
628 17 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
629 src/templates/x86ArchitectureTemplate.py:
630 call ls with '-1 --color=no'
631
632 16 Nov 2005; Preston Cody <codeman@gentoo.org> :
633 added warning (#9) to GRP ppl about stage3 tarballs
634
635 15 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
636 src/GLIArchitectureTemplate.py:
637 change fat32/fat16 to vfat in mount_local_partitions() so mount doesn't get
638 confused
639
640 13 Nov 2005; Preston Cody <codeman@gentoo.org> :
641 removed protocols from rc.conf screens
642 finished initial rc.conf and make.conf in webgli
643
644 13 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
645 src/net/server/gliserv.py:
646 add -h option to usage()
647 show time and request URI in debug mode
648 show client IP in debug mode
649 just use IP instead of trying to do a reverse lookup
650
651 12 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
652 src/net/server/gliserv.py:
653 'classier' 401 message
654 proper commandline parsing
655 help via -h
656 user/pass can be specificed via commandline option
657
658 11 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
659 src/net/server/gliserv.py:
660 basic HTTP auth
661
662 10 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
663 src/net/server/gliserv.py:
664 dynamic module reloading (yipee!)
665 send 'Last-Modified' header for real files
666 respond to HEAD with just headers
667 src/net/server/handlers/WebGLIHandler.py:
668 icons for drives
669
670 7 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
671 src/net/server/handlers/WebGLIHandler.py:
672 initial 'pretty' partition table display support
673 clicking partition in 'pretty' display works instead of radio buttons
674 radio buttons and pretty display work together
675 META redirect instead of javascript
676 pretty display stretches across entire screen
677 'Recommended layout' and 'Clear drive' functions
678 properly catch exceptions from do_recommended()
679 src/GLIArchitectureTemplate.py:
680 replace preinst, copy, postinst, rm steps with qmerge
681 whoops...that shouldn't have been commented out
682 create image_dir with -p in copy_pkg_to_chroot()
683 more generic of symlink crappiness
684 new copy_pkg_to_chroot() actually works now
685
686 6 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
687 src/GLIStorageDevice.py:
688 initial generic disk support
689 fixes for add_partition() code
690 src/net/server/handlers/WebGLIHandler.py:
691 added support for creating generic disks
692 add new partition working
693 save and delete partitions
694
695 6 Nov 2005; Preston Cody <codeman@gentoo.org> :
696 webgli: Partitioning making progress.
697
698 5 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
699 src/GLIArchitectureTemplate.py:
700 copy_pkg_to_chroot() overhaul - does install the Right Way(TM) (copy files to
701 image dir, run pkg_setup, pkg_preinst, copy to /, pkg_postinst, remove image
702 dir) and works around /etc/gconf symlink problem
703
704 5 Nov 2005; Preston Cody <codeman@gentoo.org> :
705 webgli: lots of updates. preliminary partitioning. extra packages works.
706
707 3 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
708 src/net/server/gliserv.py:
709 httpd now supports HTTPS and falls back to HTTP if not available
710 make fallback actually work
711 src/net/server/SecureXMLRPCServer.py:
712 SecureSocketServer is now threaded
713
714 2 Nov 2005; Andrew Gaffney <agaffney@gentoo.org> :
715 src/net/client/gliclient.py:
716 try to use HTTPS for XMLRPC first and fallback to HTTP
717 pretend mode
718 src/net/server/gliserv.py, src/net/server/SecureXMLRPCServer.py:
719 HTTPS XMLRPC goodness from samyron
720 pass name of certificate
721
722 31 Oct 2005; Preston Cody <codeman@gentoo.org> :
723 wegli: daemons and services screens done.
724
725 30 Oct 2005; Preston Cody <codeman@gentoo.org> :
726 webgli: networking and users screens
727 added return_redirect to handler.py
728 loading and saving install/client profiles works for webgli now
729 Review also done
730
731 *GLI-0.2 (27 Oct 2005)
732
733 26 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
734 src/templates/x86ArchitectureTemplate.py:
735 properly check for bootloader emerge exist status with exitsuccess()
736 log output of grub install command
737 add --batch --no-floppy to grub command
738 grubinstallstring only gets logged if debug is on
739 src/GLIUtility.py:
740 update progress bar to 100% when process finishes
741
742 25 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
743 src/GLIClientController.py:
744 added debugging code for the interaction between the 2 threads via Event()
745 src/GLIUtility.py:
746 doubled the buffer size in spawn()
747 bump buffer size up to 16384
748 only report progress in 5% increments
749 src/GLIArchitectureTemplate.py:
750 kernelpkgs.txt support code
751 above disabled because it sucks
752 added add_pkg_to_world()
753
754 24 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
755 src/GLIArchitectureTemplate.py:
756 use tar | tar to copy files in copy_pkg_to_chroot()
757 extract devices.tar.bz2 created by baselayout instead of running MAKEDEV
758
759 23 Oct 2005; Preston Cody <codeman@gentoo.org> :
760 DEBUGGING ADDED TO AT. verbose field added to CConfig.
761
762 23 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
763 src/net/server/gliserv.py:
764 / maps to index.html
765 look for actual files in html/
766 src/net/html:
767 new template
768 src/GLIUtility.py:
769 added parse_vdb_contents()
770 src/GLIArchitectureTemplate.py:
771 added copy_pkg_to_chroot()
772 added debug code to dynamic-stage3
773 switch dynamic-stage3 to new method
774 lots of bug fixes from adding debug code
775
776 22 Oct 2005; Preston Cody <codeman@gentoo.org> :
777 webgli initial bootloader support + changed make.conf.
778 IP: changed defaults for stage, kernel_build_method, kernel_source_pkg.
779
780 20 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
781 src/GLIUtility.py:
782 horrible tangled mess of code that is tarball unpacking subprogress display
783 add unpack progress to portage snapshot
784 use read() instead of readlines() in spawn()
785 only update progress bar for whole percents
786
787 19 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
788 src/templates/x86ArchitectureTemplate.py:
789 change call to 'grub' to use GLIUtility.exitsuccess()
790 add definition of 'build_mode' in _configure_lilo()
791 src/misc/updategtkfe, src/misc/updateglid:
792 fix so subshell is called in root shell
793
794 18 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
795 src/net/server/handlers/WebGLIHandler.py:
796 stage screen launches URI browser in sized window with various properties set
797
798 17 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
799 src/misc/updategtkfe:
800 updated to actually work
801 remove previous snapshot and extracted dir before downloading
802 src/misc/updateglid:
803 updated to actually work
804 src/templates/x86ArchitectureTemplate.py:
805 fixed bug where grub code was looking for 'root+root+file_name2'
806
807 16 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
808 src/net/server/handlers/WebGLIHandler.py:
809 URI browser
810 added mirror selection
811 src/GLIUtility.py:
812 ls via ssh strips off ending *
813
814 16 Oct 2005; Preston Cody <codeman@gentoo.org> :
815 more updates to webgli. stage selection.
816
817 11 Oct 2005; Preston Cody <codeman@gentoo.org> :
818 updated webgli with preliminary Network Mounts support.
819
820 9 Oct 2005; Preston Cody <codeman@gentoo.org> :
821 GenDialog: string formatting and yes/no label fixes.
822 added WebGLI template for gliserv.py
823 added WebGLIHandler as well as a definition for it in gliserv.py
824 updates to the webgli files even though they won't be there for long.
825 Utility: remove exception for non-existant grppkgs.txt until the new livecd
826 goes public.
827
828 9 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
829 src/net/server/gliserv.py:
830 override dict to not be so anal
831 main server now loads separate module to handle requests
832 src/net/server/handlers/ProfileHandler.py, src/net/server/handler.py:
833 split out profile URLs into separate handler function
834 move handlers into subdirectory
835 add Welcome and Clients handlers
836
837 5 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
838 src/GLIUtility.py:
839 raise exception if password prompt received twice
840
841 2 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
842 src/GLIUtility.py:
843 removed rot13ify()
844
845 1 Oct 2005; Andrew Gaffney <agaffney@gentoo.org> :
846 src/net/server/gliserv.py:
847 allow for param to be passed multiple times in GET
848 no XMLRPC functions return None
849 modify POST request parsing to only create a list if needed
850 fix GET request parsing so the list creation for multiple values works
851 src/net/client/gliclient.py:
852 various typo and type mismatch fixes
853 exit after exception
854
855 30 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
856 src/net/client/gliclient.py:
857 initial commit
858 pass MAC to XMLRPC functions
859 src/net/server/GLIServerProfile.py:
860 rename GLIClientsProfiles to GLIServerProfile
861
862 29 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
863 src/net/server/gliserv.py:
864 now handles POST requests
865 move majority of request handling code to common_handler() to reduce code
866 duplication
867 profile loading
868 client reg via XMLRPC goes into SharedInfo()
869 /showclients redesign
870 template fixes
871 allow handler functions to add/change headers
872 save profile
873
874 28 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
875 src/net/server/GLIClientsProfiles.py:
876 initial commit
877 src/net/server/template.html:
878 initial commit
879 src/net/server/gliserv.py:
880 add template mojo
881
882 26 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
883 src/net/server/gliserv.py:
884 XMLRPC mojo
885
886 22 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
887 src/GLIArchitectureTemplate.py:
888 add code in _edit_config() to comment line where variable is defined
889 previously
890 insert new line under previous definition of variable if it exists
891 small _edit_config() cleanup
892 src/GLIStorageDevice.py:
893 add clear_partitions() function
894 new sizes for recommended partition layout
895 automatically calculate swap size for recommended layout
896
897 21 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
898 src/templates/x86ArchitectureTemplate.py:
899 fat16 mojo
900
901 20 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
902 src/GLIStorageDevice.py:
903 prevent do_recommended() from being run twice
904 rewrite do_recommended() to be more robust
905 src/GLIArchitectureTemplate.py:
906 rework _edit_config() to not write duplicate entries
907
908 17 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
909 src/GLIStorageDevice.py:
910 added do_recommended() function to automatically created 256M/1G/* layout
911
912 17 Sep 2005; Preston Cody <codeman@gentoo.org> :
913 src/gli-dialog.py: added set_distcc to the list
914 GenDialog: added set_distcc. untested.
915 IP: added install_distcc flag.
916 AT: added install_distcc function based on the flag. runs after build_kernel
917 changed AT spawn command for distcc for nodeps.
918
919 16 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
920 src/GLIUtility.py:
921 add rot13ify() function
922
923 16 Sep 2005; Preston Cody <codeman@gentoo.org> :
924 src/GenDialog.py:
925 added a sentence of text. unchecking support added.
926
927 15 Sep 2005; Preston Cody <codeman@gentoo.org> :
928 src/GLIUtility.py:
929 added get_grp_pkgs_from_cd() to return a list of packages in GRP for FE menus
930 src/GenDialog.py:
931 still working on extra_packages. transformed the list to new format.
932 added GRP indication to list. untested.
933 TODO lists updated.
934 src/fe/dialog/gli-dialog.py:
935 spelling mistook.
936
937 14 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
938 src/GLIUtility.py:
939 get_snapshot_from_cd() returns '' instead of 'file://' if nothing found
940
941 5 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
942 src/GLIUtility.py:
943 add get_directory_listing_from_uri()
944 add http support to above
945 add ftp support to above
946 add scp support to above
947 src/GLIArchitectureTemplate.py:
948 "0" instead of 0 for key of single-element dict passed to _edit_config()
949
950 5 Sep 2005; Preston Cody <codeman@gentoo.org> :
951 value_only -> only_value
952
953 3 Sep 2005; Preston Cody <codeman@gentoo.org> :
954 gutted out all of etc_portage structure since it is now all handled by
955 etc_files
956
957 3 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
958 src/GLIArchitectureTemplate.py:
959 install_packages() sends progress update notifications
960 src/templates/x86ArchitectureTemplate.py:
961 increase sleep to 5s between format tries
962 src/GLIClientController.py:
963 pass 'self' to AT instead of 'self._pretend'
964
965 2 Sep 2005; Preston Cody <codeman@gentoo.org> :
966 logger -> logger.log in x86AT
967
968 1 Sep 2005; Preston Cody <codeman@gentoo.org> :
969 added set_etc_portage to IP. debugging gli-d's support for it.
970
971 1 Sep 2005; Andrew Gaffney <agaffney@gentoo.org> :
972 src/templates/x86ArchitectureTemplate.py:
973 switch to 3 tries for mkfs instead of looping waiting for dev node to exist
974
975 30 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
976 src/GLIArchitectureTemplate.py:
977 add _portage_best_version() function and rework install_packages() to allow
978 for future X of Y tracking
979 Use best_visible instead of best_version
980 tracked down and fixed missing = causing empty install extra packages
981 use = when emerging also
982 quickpkg hokey pokey
983 run _get_packages_to_emerge() again with -pk
984
985 22 Aug 2005; Preston Cody <codeman@gentoo.org> :
986 src/ArchTemplate:
987 removed install_xorg_x11, and put the xorg.conf copying at
988 the end of install_packages.
989 added updateglid to /src/misc
990 updated all core files with new GPL notice and copyright statement.
991
992 21 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
993 src/GLIUtility.py:
994 fix get_snapshot_from_cd() to look in /mnt/livecd/snapshots/ if it can't find
995 a snapshot in /mnt/cdrom/snapshots/
996 get_snapshot_from_cd() adds file:// at the beginning
997 change calls to extra package special case functions to 'self.blah'
998
999 21 Aug 2005; Preston Cody <codeman@gentoo.org> :
1000 src/ArchTemplate: changed "voodoo".
1001 changed order of portage sync methods. made a fallback to webrsync if
1002 normal emerge sync fails.
1003 removed get_sources_from_cd because it is obsolete.
1004 add special cases to install_packages. remove fatal exception on package
1005 install failure b/c the box will still be bootable.
1006 add install_xorg_x11. remove adding of xdm to runlevel. this will now be
1007 handled in the FEs.
1008 src/GenDialog: added a bunch of code for dealing with x11-based packages.
1009 awaiting testing.
1010
1011 20 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1012 src/GLIStorageDevice.py:
1013 global try/except block around fs resizable detection code
1014 src/GLIArchitectureTemplate.py, src/GLIClientController.py:
1015 install-failed cleanup function
1016
1017 18 Aug 2005; Preston Cody <codeman@gentoo.org> :
1018 x86ArchTemplate: updated lilo code. separated out THREE commands. untested.
1019
1020 16 Aug 2005; Preston Cody <codeman@gentoo.org> :
1021 GLIGenDialog:
1022 add drive choices for loaded configs.
1023 force snapshot for dynamic_stage3
1024 init the snapshoturi input to the cd snapshot if not already selected.
1025 if dynamic_stage3, skip the make.conf step.
1026 GLIUtility: add get_cd_snapshot_uri() for local snapshots.
1027 this fixes parts 1,2,3,6 of bug 102747 for gli-dialog
1028
1029 16 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1030 src/GLIArchitectureTemplate.py:
1031 manually call MAKEDEV in stage3-dynamic code
1032 copy /etc/inittab.old to /etc/inittab in chroot
1033 src/GLIUtility.py:
1034 add beginning of validate_uri() function
1035 add file:/// support to validate_uri()
1036 single quotes when setting livecd password
1037
1038 15 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1039 src/GLIGenDialog.py:
1040 change getmountpoint() to get_mountpoint()
1041 src/misc/updategtkfe:
1042 committed script to automatically download latest snapshot and run gtkfe
1043 src/templates/x86ArchitectureTemplate.py:
1044 fix _configure_lilo_add_windows() for IP -> GLISD stuff
1045 src/GLIArchitectureTemplate.py:
1046 give tmp_minor an initial value in mount_local_partitions so that the value
1047 remain from the previous drive
1048
1049 14 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1050 src/templates/x86ArchitectureTemplate.py:
1051 Fix _configure_lilo() for IP using GLISD stuff
1052 src/GLIArchitectureTemplate.py:
1053 install_cron_daemon() treats "none" specially
1054
1055 14 Aug 2005; Preston Cody <codeman@gentoo.org> :
1056 old patch from Steven Mertens to resolve bug #96642
1057 numerous asthetic changes to GenDialog, no real functionality changes though.
1058 strings renamed for global use if necessary.
1059 fix all three parts of bug 102291
1060 disable set_etc_portage until fully-written.
1061
1062 13 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1063 src/GLIClientController.py:
1064 lower-case http/ftp proxy envvars
1065
1066 12 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1067 src/GLIClientController.py:
1068 log end of pre_install steps to aid in debugging
1069 src/templates/x86ArchitectureTemplate.py:
1070 change set_flag(flag) to set_flag(flag, True)...*stab* *stab*
1071
1072 10 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1073 src/GLIArchitectureTemplate.py:
1074 check to make sure that the device node we're wait for to exist isn't of
1075 type 'free'
1076
1077 09 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1078 src/GLIGenDialog.py:
1079 convert install_packages to list in set_extra_packages()
1080 check return code of checklist() call in "Manual" section
1081 *actually* fix the first problem
1082
1083 08 Aug 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIUtility.py:
1084 "source /etc/profile" does not ensure the ENV is correctly set up. Use "bash
1085 -l" instead, to ensure a proper environment (important for CONFIG_PROTECT).
1086
1087 06 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1088 src/GLIArchitectureTemplate.py:
1089 re-fix net.eth1+ symlink code...wtf is wrong with cvs?
1090
1091 04 Aug 2005; Andrew Gaffney <agaffney@gentoo.org> :
1092 Add CDATA support to SimpleXMLParser and add utility functions for it.
1093
1094 04 Aug 2005; Robin H. Johnson <robbat2@gentoo.org>
1095 src/GLIArchitectureTemplate.py:
1096 Fix case where vixie-cron is specified as a full package atom, as we still
1097 don't want to run 'crontab /etc/crontab' for it.
1098
1099 *GLI-0.1 (3 Aug 2005)
1100
1101 30 Jul 2005; Preston Cody <codeman@gentoo.org> :
1102 add scp to list of is_uri() so GenDialog doesn't complain.
1103 fixed livecd-kernel bug in bootloader code.
1104 fixed gendialog for dynamic_stage3 instead of "networkless"
1105 change bootloader to allow for both initrd and initramfs.
1106 fix IP for dynamic_stage3.
1107 fix ArchTemplate for broken mountpoint creation. fix GenDialog part showing.
1108
1109 30 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1110 Added full scp:// URI support to get_uri() in GLIUtility
1111 Remove "networkless" from dynamic stage3 if locic.
1112 Remove print statement from scp:// code.
1113 Change scp code to check for "assword: " instead of "Password:"
1114 Fix post-install network code to create net.eth1+ symlink correctly
1115 Check to make sure pkg can be split on / and some debugging code
1116 Add 2>dev/null to emerge call in _get_packages_to_emerge()
1117 SimpleXMLParser handles True/False/None correctly now
1118 Comment out above fix
1119 Add partitioning wait-for-device-to-exist code to mount_local_partitions
1120
1121 28 Jul 2005; Scott Myron <samyron@gentoo.org> :
1122 Removed a FIXME in the GLIClientConfiguration that is no
1123 longer needed.
1124
1125 27 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1126 Default to x86 in ClientConfig
1127 Typo in build-a-stage3 code.
1128 Remove MAKEDEV call in build-a-stage3 postscript.
1129
1130 26 Jul 2005; Preston Cody <codeman@gentoo.org> :
1131 Rewrote init of IP for gli-d. Other GenDialog updates.
1132 allow network_type to be None in CConfig.
1133
1134 24 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1135 Add _dynamic_stage3 option to IP.
1136 Add check for that option to dynamic stage3 code in ArchTemplate.
1137 Fix code to determine default route in get_eth_info() in GLIUtility.
1138 Fix serialization of dns-servers in ClientConfig.
1139
1140 24 Jul 2005; Preston Cody <codeman@gentoo.org> :
1141 changed default values of cron/logger in IP.
1142 moved GenDialog IP init out to the individual files. gli-dialog's version
1143 will change quite a bit.
1144
1145 22 Jul 2005; Preston Cody <codeman@gentoo.org> :
1146 added ppcArchTemplate. blank now. working on yaboot.
1147 modified ArchTemplate for amd64 and ppc custom kernels.
1148 skeleton implementation of _configure_yaboot.
1149 small fixes to other templates.
1150
1151 21 Jul 2005; Preston Cody <codeman@gentoo.org> :
1152 GenDialog updates. changed comment in IP.
1153
1154 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1155 src/GLIInstallProfile.py:
1156 Fix codeman's screwup of changing the service seperator to ',' in the parser
1157 without changing it in the serialization code! Also document this in a
1158 comment so you find it easier. Everybody needs to make sure they update
1159 their install profiles!
1160
1161 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1162 src/GLIArchitectureTemplate.py:
1163 Fix casting of list to string and concat of None with string, as well as
1164 commented prototype of checking that mounting actually worked (found a case
1165 where mount can return success, but the mount won't be done).
1166
1167 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1168 src/templates/x86ArchitectureTemplate.py:
1169 Remove TEMP UGLY HACK of time.sleep(5), and replace it with a while loop
1170 checking for the device, and sleeping 1 second each time.
1171
1172 07 Jul 2005; Robin H. Johnson <robbat2@gentoo.org>
1173 src/templates/x86ArchitectureTemplate.py:
1174 Refactor install_bootloader code and _install_{grub,lilo} so that 'none' for
1175 bootloader works again. Also rename _install_{grub,lilo} to
1176 _configure_{grub,lilo} since they don't install the loaders anymore
1177 themselves.
1178
1179 7 Jul 2005; Preston Cody <codeman@gentoo.org> :
1180 fix global USE flags to not include the arch types at the end.
1181 updates to GenDialog and gli-d.
1182
1183 6 Jul 2005; Preston Cody <codeman@gentoo.org> :
1184 fixing bootloader code for no initrd and initrd->initramfs naming change.
1185
1186 6 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1187 Proper comments and parameters to GLIException in install_mta()
1188 Allow optional exclusion of HTTP, FTP, and/or RSYNC mirrors in list_mirrors()
1189 Add strip() to list_mirrors(), list_subarch_from_mirror() and
1190 list_tarball_from_mirror() to eliminate blank last item.
1191
1192 5 Jul 2005; Andrew Gaffney <agaffney@gentoo.org> :
1193 Added stage3 generation code.
1194
1195 5 Jul 2005; Preston Cody <codeman@gentoo.org> :
1196 Added sleep(5) to partitioning code, temp got rid of the NOCOLOR in _emerge
1197 Mild changes to GenDialog.
1198
1199 30 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1200 Remove separate install step configure_rc_conf() since it's handled by
1201 update_config_files()
1202 Make a copy of newvalues in _edit_config() so quotes aren't added when the
1203 function is called twice on the same file.
1204
1205 29 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1206 Missing \ in sed in _get_packages_to_emerge()
1207 Removed explicit emerging of hotplug and no longer add it to the runlevel.
1208 Check in _quickpkg_deps() to ignore blank package names returned from
1209 _get_packages_to_emerge()
1210
1211 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1212 fixed agaffney's missing = and extra : in x86AT. commented out crashing line
1213 in the dialog.py gauge code.
1214
1215 28 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1216 Add code to update_config_files() to go through etc_files and update stuff.
1217 Check to see that _etc_files['make.conf'] exists in get_make_conf()
1218 Only use float() in partition xml parsing code if type == "free"
1219
1220 28 Jun 2005; Preston Cody <codeman@gentoo.org> :
1221 finished almost all internationalization of GenDialog.
1222 attempt at fixing rc.conf function. moved 3 generate functions out of
1223 fe/gtk/RcDotConf and put them in Utility. fixed self bug.
1224 added dialog.py to the fe/dialog directory so it actually gets used.
1225
1226 27 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1227 Roll rc_conf and make_conf into master etc_files structure in InstallProfile.
1228
1229 27 Jun 2005; Preston Cody <codeman@gentoo.org> :
1230 fix extra entry in list_mirrors()
1231 beginning internationalization runthrough.
1232
1233 26 Jun 2005; Preston Cody <codeman@gentoo.org> :
1234 added dialog.py to /src temporarily until it gets accepted upstream.
1235 fix for unused value in form in dialog.py and changed heights.
1236 fix GenDialog forms.
1237
1238 25 Jun 2005; Preston Cody <codeman@gentoo.org> :
1239 Changed hostname/domainname for new baselayout.
1240 Changed _add_to_runlevel errors to logs.
1241 Updated TODO list to show status of GenDialog
1242 More updates to GenDialog including two checklists that probably won't work.
1243 update IP to use comma-separated list instead of space separated for services.
1244
1245 24 Jun 2005; Preston Cody <codeman@gentoo.org> :
1246 Add dhcp_options to the CC, CConfig, and GenDialog. More overall changes to
1247 GenDialog as it gets closer to completion.
1248
1249 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1250 Modify get_eth_info() to take a full interface name (eth0 fex). float()
1251 instead of int() in add_partition_device_partition() for minor (closes 96804)
1252
1253 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1254 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
1255 instead of 'interfaces[interface][1]' since DHCP uses that field for its
1256 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
1257
1258 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1259 Apply spawn() patch from #96644 (with minor changes). Make sure the return
1260 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
1261 small error with <pipe>.close() returning None. Fix space vs. tab issue.
1262 Fix undefined variable 'output' issue in spawn().
1263
1264 20 Jun 2005; Preston Cody <codeman@gentoo.org> :
1265 More updates to GenDialog and gli-d.
1266
1267 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1268 Modify list_mirrors() to return a list of mirror URL/name pairs.
1269
1270 19 Jun 2005; Preston Cody <codeman@gentoo.org> :
1271 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
1272 get subarch.
1273
1274 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1275 Backend partitioning will create disklabel is none exists. Installprofile
1276 defaults to "" now instead of "msdos" for disklabel type. Fix for
1277 mount_local_partitions() to remember device along with minor in the
1278 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
1279 add else block to log unsupported netmount types to mount_network_shares()
1280
1281 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1282 src/GLIArchitectureTemplate.py:
1283 Refactor kernel_compile common stuff, fix 2.4 build process.
1284 src/fe/cli/clife.py:
1285 Logging system.
1286 src/GLIUtility.py, src/GLIStorageDevice.py:
1287 Add comments about re-writes needed for boxes without sysfs.
1288
1289 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1290 src/GLIArchitectureTemplate.py:
1291 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
1292 'make dep' call for custom compile. build_mode support for prepare-only and
1293 none types completed. custom compile function chains shell functions in
1294 spawned script, to allow for catching all errors.
1295
1296 15 Jun 2005; Preston Cody <codeman@gentoo.org> :
1297 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
1298 and GenDialog. other gendialog updates as well. kernel updates untested.
1299
1300 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1301 src/GLIInstallProfile.py:
1302 Change structure of etc-portage stuff. The serialization was broken before my
1303 last commit, and I am the only person that's ever used it. The new schema is
1304 as follows:
1305 <etc-portage>
1306 <file name="package.mask"/>
1307 <file name="package.unmask">
1308 <entry atom="sys-kernel/openmosix-sources"/>
1309 </file>
1310 <file name="package.use">
1311 <entry atom="sys-libs/db">
1312 -java
1313 </entry>
1314 <entry atom="dev-libs/cyrus-sasl">
1315 -ldap
1316 </entry>
1317 </file>
1318 </etc-portage>
1319
1320
1321 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1322 src/GLIInstallProfile.py:
1323 Add new entry for gli-profile/kernel-build-method item. Add missing
1324 serialize_etc_portage (temporary). Make serialize_make_conf always print the
1325 keys in the same order.
1326
1327 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1328 src/GLIArchitectureTemplate.py:
1329 Clean up commenting used by _edit_config(), and fix bug where wrong comment
1330 was repeatedly appended to make.conf.
1331
1332 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
1333 src/GLIArchitectureTemplate.py:
1334 Put some Linux-2.6 specific code under a if statement. Store list of
1335 successfully mounted swap device for using swapoff. Add proper error checking
1336 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
1337 'file'. Clean up some redundant code (thanks to pychecker).'
1338
1339 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1340 Fix typos: get_extended() instead of get_extended_partition(). Added
1341 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
1342 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
1343
1344 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org> :
1345 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
1346 in add_network_interface.
1347
1348 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1349 src/GLIArchitectureTemplate.py:
1350 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
1351 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
1352 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
1353 prepare_chroot.
1354
1355 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
1356 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
1357 +src/fe/installer-gtk:
1358 Add new automated CLI frontend. Add scripts that are the intended means to
1359 use each frontend.
1360
1361 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1362 src/GLIClientController.py:
1363 Add null type to network config, for cases where the interface is already up
1364 and should not be touched (netboot for example).
1365
1366 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1367 src/GLIArchitectureTemplate.py:
1368 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
1369 string!. Try to use binary packages if available by default.
1370
1371 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1372 src/GLIArchitectureTemplate.py:
1373 More error checking for _add_to_runlevel, to ensure that the init script
1374 actually exists before we try to add it. set_services phase must take place
1375 after the package installation, otherwise the init scripts might not exist.
1376 Find the correct init script for the cron and logging daemons, and add that
1377 instead of the package atom.
1378
1379 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1380 src/GLIArchitectureTemplate.py:
1381 Fix up _edit_config so that it works if the file doesn't already exist. Fix
1382 usage of 'file' to 'contents' for the variable name, as it shadows
1383 __builtin__.file.
1384
1385 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1386 src/GLIArchitectureTemplate.py:
1387 Add MTA install code, and include MTA install phase. Ensure
1388 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
1389 for 'none' kernel config for build_kernel phase. Put kernel_script in
1390 /var/tmp instead of /root for build_kernel phase.
1391
1392 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
1393 Rename mta variables to match syslog/cron variables.
1394
1395 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1396 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
1397 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
1398 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
1399 src/templates/.cvsignore, src/tests/.cvsignore:
1400 Refactor partition formatting again to include error checking. Allow 'none'
1401 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
1402
1403 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> :
1404 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
1405 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
1406 only have a single spawn call.
1407
1408 11 Jun 2005; Preston Cody <codeman@gentoo.org> :
1409 refixed samyron's fix of set_architecture_template.
1410
1411 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1412 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
1413 be executable.
1414
1415 10 Jun 2005; Scott Myron <samyron@gentoo.org> :
1416 Fixed one of the FIXME's in the ClientConfiguration. There is now some
1417 error checking when you call set_architecture_template.
1418
1419 10 Jun 2005; Preston Cody <codeman@gentoo.org> :
1420 moved the mkfsopts input to the partition options menu instead of the during
1421 the creation process. updated GenDialog to say it supports reiserfs v3.
1422
1423 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
1424 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
1425 Complete support for 'mkfsopts' parameter in main system and dialogfe.
1426 Add support for other partition types to dialogfe.
1427 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
1428 avoid integer overflows and wraparounds.
1429
1430 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1431 Removed start/end from XML output and added mkfsopts to partitioning info.
1432 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
1433 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
1434 in GLIClientConfiguration. Change from .1 and .9 to constants for
1435 partitioning. Fix free space overwriting bug. Remove a few unused functions
1436 from rewrite. Fix call to get_partition_at()
1437
1438 8 Jun 2005; Preston Cody <codeman@gentoo.org> :
1439 Updates to GenDialog and dialogfe.
1440
1441 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1442 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
1443
1444 6 Jun 2005; Preston Cody <codeman@gentoo.org> :
1445 more GenDialog updates to partitioning.
1446
1447 5 Jun 2005; Preston Cody <codeman@gentoo.org> :
1448 Indenting issue in GLISD/get_ordered_partition_list.
1449 updates to GenDialog partitioning and added default UTC for timezone in IP.
1450
1451 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1452 Added GLISD.get_model()
1453
1454 3 Jun 2005; Preston Cody <codeman@gentoo.org> :
1455 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
1456 More updates to GenDialog :)
1457
1458 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org> :
1459 Added get_interface_realname() function.
1460
1461 2 Jun 2005; Preston Cody <codeman@gentoo.org> :
1462 Added auto-save of CConfig and copying to new /root after install.
1463 yet even more GenDialog updates.
1464
1465 1 Jun 2005; Preston Cody <codeman@gentoo.org> :
1466 removed print statement from GLISD. more updates to GenDialog.
1467
1468 31 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1469 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
1470 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
1471 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
1472 places in GLIClientConfiguration.
1473
1474 27 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1475 Fix mount_local_partitions(), configure_fstab(), and
1476 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
1477 A few more fixes for templates/x86Archtemplate
1478
1479 27 May 2005; Preston Cody <codeman@gentoo.org> :
1480 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
1481 a work in progress.
1482
1483 24 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1484 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
1485 directly. GLISD can now handle data imported from XML.
1486
1487 22 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1488 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
1489 handle blank (no disklabel) disks.
1490
1491 20 May 2005; Preston Cody <codeman@gentoo.org> :
1492 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
1493 up, documented, and separated out serialization and grouped all sections.
1494
1495 19 May 2005; Preston Cody <codeman@gentoo.org> :
1496 Reorganization of ClientConfiguration and gutting of unused functions.
1497 Removed verbose option from CC. Moved import statement in IP and CConfig up.
1498
1499 18 May 2005; Preston Cody <codeman@gentoo.org> :
1500 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
1501
1502 17 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1503 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
1504 partitioning. CC serializes install profile to disk and prepare_chroot()
1505 copies it into /mnt/gentoo/root
1506
1507 16 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1508 Moved URI parsing into new function parse_uri()
1509
1510 14 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1511 Added XMLParser module.
1512
1513 13 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1514 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
1515 Minor fix to is_uri() regex to allow hyphens in hostname.
1516
1517 12 May 2005; Preston Cody <codeman@gentoo.org> :
1518 Updated finishing_cleanup for new unmounting method from agaffney.
1519
1520 12 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1521 Fix GLILogger to use correct time format string. Fix _edit_config() to
1522 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
1523 unicode support to is_realstring().
1524
1525 11 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1526 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
1527 return value instead of non-zero. Add code to output a traceback to the
1528 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
1529 instead of --nocolor.
1530
1531 10 May 2005; Preston Cody <codeman@gentoo.org> :
1532 Added GLIGenDialog.py to make a generic class for the dialog functions that
1533 can be used by both dialogfe and the netfe/be. updated both for new filename.
1534 date changes. 2004->2005.
1535
1536 10 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1537 Removed 'quiet=True' from spawn() calls
1538
1539 10 May 2005; Preston Cody <codeman@gentoo.org> :
1540 Updated GLIUtility with patches from chotchki. Also added documentation
1541
1542 9 May 2005; Preston Cody <codeman@gentoo.org> :
1543 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
1544 Updated _edit_config in ArchTemplate, make_config, and various other fixes
1545 from bug #89683, mostly touchups.
1546
1547 6 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1548 GLIStorageDevice cleanup patch from bug #91761
1549
1550 3 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1551 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
1552 _edit_config(). Error logging casts 'error' to str
1553
1554 2 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1555 Exceptions received in CC are logged before being passed to the FE. Added
1556 code to CC to handle exceptions *not* thrown by the installer itself.
1557
1558 1 May 2005; Andrew Gaffney <agaffney@gentoo.org> :
1559 get_max_mb_for_resize() returns -1 if not self.resizeable
1560
1561 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1562 More dirty rsync hacks :-/
1563
1564 29 Apr 2005; Preston Cody <codeman@gentoo.org> :
1565 Patches from chotchki (bug #90325) to improve CC networking. untested.
1566
1567 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1568 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
1569 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
1570 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
1571 GLIStorageDevice as suggested by pychecker. Fix minor bug in
1572 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
1573 _get_packages_to_emerge()
1574
1575 28 Apr 2005; Preston Cody <codeman@gentoo.org> :
1576 Added group-adding code to set_users in ArchTemplate
1577
1578 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1579 Added post-install script code
1580
1581 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1582 Fixed encapsulation issues in GLIClientController (bug #90141)
1583
1584 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1585 Update resizing code in GLIStorageDevice
1586
1587 17 Apr 2005; Preston Cody <codeman@gentoo.org> :
1588 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
1589
1590 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1591 Reverted change to ArchTemplate and added support for commented line in old
1592 code.
1593
1594 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1595 Changed _edit_config() to modify value in-place instead of commenting out and
1596 adding the new value to the end of the file.
1597
1598 15 Apr 2005; Preston Cody <codeman@gentoo.org> :
1599 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
1600 Also updated TODO list.
1601
1602 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1603 Use blackace's one-liner to add comments for all function for use with
1604 pythondoc.
1605
1606 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1607 Moved 'end >= device_sectors' check out of loop to check for next partition's
1608 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
1609 Partitioning code now tracks start/end of extended for placing logicals. End
1610 point of logical is now adjusted along with start.
1611
1612 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1613 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
1614 the way of partitioning from a blank disk. Add int() around access to minor
1615 key in partition information due to new partition code leaving them as float.
1616
1617 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1618 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
1619
1620 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1621 Major GLIStorageDevice overhaul...all MB now instead of sectors.
1622
1623 8 Apr 2005; Scott Myron <samyron@gentoo.org> :
1624 Added support for DHCP options and MAC addresses in the InstallProfile.
1625
1626 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org> :
1627 Changed mountopts check to work for blank and whitespace. Pipe emerge through
1628 sed to properly strip out junk.
1629
1630 2 Apr 2005; Preston Cody <codeman@gentoo.org> :
1631 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
1632 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
1633
1634 31 Mar 2005; Preston Cody <codeman@gentoo.org> :
1635 Fixed indent problem in GLICController
1636
1637 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1638 Check for disklabel type "loop" and use the device name without a minor.
1639
1640 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1641 Remove /tmp/compile_output.log and /var/log/install.log when install is
1642 complete. Added code to (hopefully) keep 2nd thread running after install.
1643 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
1644 get_eth_info() function. Remove most of content in amd64ArchTemplate and
1645 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
1646
1647 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1648 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
1649 when unpacking tarball.
1650
1651 28 Mar 2005; Preston Cody <codeman@gentoo.org> :
1652 rewrote filesystem_tools. looks like it works so ripping out all the old
1653 filesystem_tools code.
1654
1655 26 Mar 2005; Preston Cody <codeman@gentoo.org> :
1656 Changed the print statements to logging in the partitioning BE code.
1657 the logger may need to be imported to the x86archtemplate. unknown yet.
1658 Added the finishing_cleanup function.
1659 added a fix to the logger from BenUrban
1660
1661 25 Mar 2005; Preston Cody <codeman@gentoo.org> :
1662 changed InstallProfile to remove is_uri check on kernel, stage, and portage
1663 URIs. The blank uri check has been commented out.
1664 ripped out error checking of set_services. this is done by _add_to_runlevel.
1665
1666 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1667 set_stage_tarball_uri() doesn't raise an exception on a blank string.
1668
1669 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1670 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1671 the install profile if available. Commented out spawn() debugging prints
1672
1673 23 Mar 2005; Preston Cody <codeman@gentoo.org> :
1674 small changes to setup_network_post. moved adding to runlevel of net.x to
1675 after the device gets symlinked. added domainname runlevel command.
1676
1677 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1678 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
1679 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
1680 spawn() call in livecd-kernel code to pass environment variables.
1681 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
1682 the install profile if available.
1683
1684 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1685 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
1686 to handle installing the livecd kernel into the new system.
1687
1688 22 Mar 2005; Preston Cody <codeman@gentoo.org> :
1689 should emerge hotplug and coldplug before adding them to runlevel.
1690
1691 21 Mar 2005; Preston Cody <codeman@gentoo.org> :
1692 took chroot out of grub_install command.
1693
1694 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1695 Changed chroot wrapper code in spawn() to write the wrapper the python way
1696 instead of the bash way to avoid quote conflicts. Added
1697 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
1698 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
1699 as it breaks the piping.
1700
1701 20 Mar 2005; Preston Cody <codeman@gentoo.org> :
1702 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
1703
1704 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1705 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
1706 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
1707 GLIInstallProfile.
1708
1709 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1710 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
1711 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
1712 into /mnt/gentoo in prepare_chroot()
1713
1714 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1715 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
1716 retarted behavior regarding threads and signals. Add code to convert MB/%/*
1717 to start/end sectors
1718
1719 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1720 Add 2>&1 to cmd in spawn()
1721
1722 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1723 Modified GLIUtility.exitsuccess() to work with return value from
1724 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
1725 creates wrapper script for commands run inside chroot so multiple commands
1726 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
1727 for the generated script from spawn()
1728
1729 16 Mar 2005; Preston Cody <codeman@gentoo.org> :
1730 Removed default values for stage tarball URI and portage tree URI from
1731 InstallProfile. These should be set by the FEs. also added services step to
1732 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
1733 Possibly fixed CC DHCP bug with -n. (thx agaffney)
1734
1735 14 Mar 2005; Preston Cody <codeman@gentoo.org> :
1736 Small fix for setting the default gateway. Also added feature to dialogfe.
1737
1738 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1739 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
1740
1741 1 Mar 2005; Preston Cody <codeman@gentoo.org> :
1742 Fixed a bunch of true -> True typos. lots of em
1743 only write new resolv.conf if there are dns servers listed.
1744
1745 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org> :
1746 Commented out 'display_on_tty8=True' in start_portmap()
1747
1748 18 Feb 2005; Preston Cody <codeman@gentoo.org> :
1749 added progress bar to dialogfe and fix logger bug in ArchTemplate.
1750
1751 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1752 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
1753 lang parameter to __init__()
1754
1755 10 Feb 2005; Preston Cody <codeman@gentoo.org> :
1756 updates to TODO list.
1757
1758 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1759 Initial code for quickpkg GRP support. Fix loop to grab packages from
1760 'emerge -p blah'
1761
1762 6 Feb 2005; Preston Cody <codeman@gentoo.org> :
1763 check for dhcp in the network stuff and emerge it if it is.
1764 added quickpkg to TODO list
1765
1766 5 Feb 2005; Preston Cody <codeman@gentoo.org> :
1767 Changed the raising of 'warning' exceptions to a simple log of the error
1768 so that the installer can continue.
1769
1770 3 Feb 2005; Preston Cody <codeman@gentoo.org> :
1771 Some big changes. First, changed most output to display_on_tty8.
1772 Second, added log lines to all templates. Some smaller fixes such as typos.
1773 Also did some cleanups of old commented lines.
1774
1775 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org> :
1776 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
1777 Undo change with fix. Escaping fix in GLIStorageDevice.py
1778
1779 31 Jan 2005; Preston Cody <codeman@gentoo.org> :
1780 more updates to TODO list. hopefully we'll soon start removing items instead
1781 of adding them.
1782
1783 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1784 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
1785
1786 27 Jan 2005; Preston Cody <codeman@gentoo.org> :
1787 updated TODO list. (again)
1788
1789 25 Jan 2005; Preston Cody <codeman@gentoo.org> :
1790 changed output of portmap start to display_on_tty8.
1791 fixed bootloader for udev and multiple kernels
1792 fixed custom kernel config (again)
1793
1794 22 Jan 2005; Preston Cody <codeman@gentoo.org> :
1795 changed default value of CC._enable_ssh to True because this is smart.
1796 added code to allow custom kernel .config. may be unstable and break. sorry.
1797
1798 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1799 partition() now waits until after it checks for partition flags before delete
1800 the partitions :P
1801
1802 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1803 Updated TODO. swapon failure it temporarily not an error. swapon is an error
1804 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
1805 blank.
1806
1807 19 Jan 2005; Preston Cody <codeman@gentoo.org> :
1808 Various fixes related to the add_users function. Still not yet finished.
1809 Added things to the TODO list. Lets start using that!
1810
1811 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1812 Added code to x86Template to format newly created partitions. Also added
1813 some error checking code. GLIStorageDevice passes 'minor' with data to
1814 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
1815 mounting code.
1816
1817 18 Jan 2005; Preston Cody <codeman@gentoo.org> :
1818 Took out unnecessary setting of random livecd root password. the cd already
1819 sets it randomly.
1820
1821 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1822 Took out an unneeded step from CC's run()
1823
1824 15 Jan 2005; Preston Cody <codeman@gentoo.org> :
1825 Attempt at detecting and adding windows partitions to lilo.
1826
1827 14 Jan 2005; Preston Cody <codeman@gentoo.org> :
1828 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
1829 partition. fixed misc exit_status => exitstatus typo.
1830
1831 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1832 Added basic code for resizing filesystems with pyparted. Fixed code for
1833 resizing ntfs and ext2/3.
1834
1835 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1836 Fixed partition() in x86Template so that it scans through logicals and deletes
1837 before deleting containing extended partition. Also clears partition table to
1838 be safe before third pass.
1839
1840 08 Jan 2005; Preston Cody <codeman@gentoo.org> :
1841 Added mount_network_shares. not able to test it from this computer.
1842 will test when i get back to school.
1843 also added start_portmap to the client_controller as an always-do.
1844 agaffney says this is needed for NFS mounts to work.
1845
1846 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1847 Partial rewrite of partitioning code in x86Template. No longer shells out to
1848 parted to perform actions, now uses all pyparted calls. Code "works" in a
1849 test, but still needs lots of TLC. Also modified tests/install.py to work
1850 with x86Template and GLIClientConfiguration.
1851
1852 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1853 Initial move of partitioning code from ArchTemplate to x86Template.
1854
1855 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1856 Added grp_install and services to InstallProfile. forgot about the set_root_password
1857
1858 07 Jan 2005; Preston Cody <codeman@gentoo.org> :
1859 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to
1860 agaffney. Test Install ran very well (skipping partitioning).
1861
1862 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1863 My mid-day update. rewrote mount_local_partitions for order of mounting.
1864 fixed prepare_chroot. rewrote configure_fstab and install_bootloader for new
1865 partition format. fixed a few _edit_configs. some may still have eluded me.
1866
1867 05 Jan 2005; Preston Cody <codeman@gentoo.org> :
1868 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order
1869 to test it.
1870 Just finished mount_local_partitions in GLIArchitectureTemplate
1871
1872 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1873 Added get_num_sectors() to GLIStorageDevice.
1874
1875 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org> :
1876 GLIStorageDevice now tracks partition boundaries in sectors instead of
1877 cylinders.
1878 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
1879 from GLIInstallProfile.
1880
1881 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1882 GLIStorageDevice returns "unknown" instead of "" for get_type()
1883
1884 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1885 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
1886 actually work. Commented out resizability checking code for speed.
1887
1888 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1889 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem
1890 in GLIStorageDevice at the suggestion of plors
1891
1892 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1893 Added a function to GLIUtility to pull a value from a make.conf-style config
1894 file. Minor type fix to GLIInstallProfile.py
1895
1896 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org> :
1897 Added code in GLIArchitectureTemplate.py to write netmounts into fstab.
1898 Separated network mounts from partition data structure in GLIInstallProfile
1899
1900 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org> :
1901 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
1902 can be resized.
1903
1904 27 Oct 2004; Preston Cody <codeman@gentoo.org> :
1905 Added some of the final functions to GLIInstallTemplate.
1906 Yes this project is still active despite rare use of the Changelog!
1907
1908 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1909 Added the GLIPartitionTools.py file. This is a temporary insertion of
1910 partitioning tools that will eventually go into their own package.
1911
1912 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1913 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains
1914 run-time for the program). Added __init__(install_profile,
1915 client_configuration) to GLI.InstallProfile. This sets install_profile and
1916 client_configuration once so as to avoid constantly passing stuff every time
1917 we call a method.
1918
1919 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1920
1921 Added another private method to GLI.InstallTemplate. _edit_config() modifies
1922 config files without messing up all the other stuff in them. This will be
1923 used for making changes to make.conf, rc.conf, /etc/conf.d/net, etc...
1924
1925 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org> :
1926
1927 Added GLI.InstallTemplate framework. This is not yet functional. However,
1928 it does have a few basic things. I added two private methods. One is
1929 _depends(). This will be used for dependency checking (ie. unpacking a
1930 tarball requires that partitioning has been done). The other is
1931 _exec_in_chroot(). This is the exact same syntax as os.system(), however,
1932 instead of being run in the liveCD environment, it runs in the chroot. This
1933 requires a bit of fork() magic, so I isolated the code. Hope to work more
1934 this week to get this class formed...
1935
1936 14 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1937 Added SAX parsing. Made GLI.InstallProfile a subclass of
1938 xml.sax.ContentHandler for obvious reasons. Switched kernel_modules and users
1939 to be lists instead of tuples to allow for easier modification (mutable,
1940 rather than immutable objects). Updated existing pydoc and added more.
1941 Implemented body of GLI.InstallProfile.parse(). Cleaned file format of
1942 GLI.py a bit. Fixed all accessors to use self references.
1943 Added initial unit test code.
1944
1945 9 Feb 2004; Eric Sammer <esammer@gentoo.org> :
1946 Added initial changelog. Setting up the basic structure of the CVS repository
1947 for the project. Added the UML class diagram in docs. Added a skeletal GLI
1948 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20