/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 652 - (show annotations) (download)
Sun Jun 12 03:38:55 2005 UTC (11 years, 2 months ago) by robbat2
File size: 25763 byte(s)
Add MTA install code, and include MTA install phase. Ensure PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support for 'none' kernel config for build_kernel phase. Put kernel_script in /var/tmp instead of /root for build_kernel phase.

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.227 2005/06/12 03:38:55 robbat2 Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
8 src/GLIArchitectureTemplate.py:
9 Add MTA install code, and include MTA install phase. Ensure
10 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
11 for 'none' kernel config for build_kernel phase. Put kernel_script in
12 /var/tmp instead of /root for build_kernel phase.
13
14 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
15 Rename mta variables to match syslog/cron variables.
16
17 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
18 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
19 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
20 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
21 src/templates/.cvsignore, src/tests/.cvsignore:
22 Refactor partition formatting again to include error checking. Allow 'none'
23 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
24
25 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
26 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
27 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
28 only have a single spawn call.
29
30 11 Jun 2005; Preston Cody <codeman@gentoo.org>
31 refixed samyron's fix of set_architecture_template.
32
33 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
34 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
35 be executable.
36
37 10 Jun 2005; Scott Myron <samyron@gentoo.org>
38 Fixed one of the FIXME's in the ClientConfiguration. There is now some
39 error checking when you call set_architecture_template.
40
41 10 Jun 2005; Preston Cody <codeman@gentoo.org>
42 moved the mkfsopts input to the partition options menu instead of the during
43 the creation process. updated GenDialog to say it supports reiserfs v3.
44
45 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
46 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
47 Complete support for 'mkfsopts' parameter in main system and dialogfe.
48 Add support for other partition types to dialogfe.
49 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
50 avoid integer overflows and wraparounds.
51
52 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
53 Removed start/end from XML output and added mkfsopts to partitioning info.
54 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
55 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
56 in GLIClientConfiguration. Change from .1 and .9 to constants for
57 partitioning. Fix free space overwriting bug. Remove a few unused functions
58 from rewrite. Fix call to get_partition_at()
59
60 8 Jun 2005; Preston Cody <codeman@gentoo.org>
61 Updates to GenDialog and dialogfe.
62
63 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
64 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
65
66 6 Jun 2005; Preston Cody <codeman@gentoo.org>
67 more GenDialog updates to partitioning.
68
69 5 Jun 2005; Preston Cody <codeman@gentoo.org>
70 Indenting issue in GLISD/get_ordered_partition_list.
71 updates to GenDialog partitioning and added default UTC for timezone in IP.
72
73 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
74 Added GLISD.get_model()
75
76 3 Jun 2005; Preston Cody <codeman@gentoo.org>
77 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
78 More updates to GenDialog :)
79
80 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
81 Added get_interface_realname() function.
82
83 2 Jun 2005; Preston Cody <codeman@gentoo.org>
84 Added auto-save of CConfig and copying to new /root after install.
85 yet even more GenDialog updates.
86
87 1 Jun 2005; Preston Cody <codeman@gentoo.org>
88 removed print statement from GLISD. more updates to GenDialog.
89
90 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
91 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
92 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
93 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
94 places in GLIClientConfiguration.
95
96 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
97 Fix mount_local_partitions(), configure_fstab(), and
98 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
99 A few more fixes for templates/x86Archtemplate
100
101 27 May 2005; Preston Cody <codeman@gentoo.org>
102 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
103 a work in progress.
104
105 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
106 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
107 directly. GLISD can now handle data imported from XML.
108
109 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
110 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
111 handle blank (no disklabel) disks.
112
113 20 May 2005; Preston Cody <codeman@gentoo.org>
114 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
115 up, documented, and separated out serialization and grouped all sections.
116
117 19 May 2005; Preston Cody <codeman@gentoo.org>
118 Reorganization of ClientConfiguration and gutting of unused functions.
119 Removed verbose option from CC. Moved import statement in IP and CConfig up.
120
121 18 May 2005; Preston Cody <codeman@gentoo.org>
122 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
123
124 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
125 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
126 partitioning. CC serializes install profile to disk and prepare_chroot()
127 copies it into /mnt/gentoo/root
128
129 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
130 Moved URI parsing into new function parse_uri()
131
132 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
133 Added XMLParser module.
134
135 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
136 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
137 Minor fix to is_uri() regex to allow hyphens in hostname.
138
139 12 May 2005; Preston Cody <codeman@gentoo.org>
140 Updated finishing_cleanup for new unmounting method from agaffney.
141
142 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
143 Fix GLILogger to use correct time format string. Fix _edit_config() to
144 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
145 unicode support to is_realstring().
146
147 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
148 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
149 return value instead of non-zero. Add code to output a traceback to the
150 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
151 instead of --nocolor.
152
153 10 May 2005; Preston Cody <codeman@gentoo.org>
154 Added GLIGenDialog.py to make a generic class for the dialog functions that
155 can be used by both dialogfe and the netfe/be. updated both for new filename.
156 date changes. 2004->2005.
157
158 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
159 Removed 'quiet=True' from spawn() calls
160
161 10 May 2005; Preston Cody <codeman@gentoo.org>
162 Updated GLIUtility with patches from chotchki. Also added documentation
163
164 9 May 2005; Preston Cody <codeman@gentoo.org>
165 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
166 Updated _edit_config in ArchTemplate, make_config, and various other fixes
167 from bug #89683, mostly touchups.
168
169 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
170 GLIStorageDevice cleanup patch from bug #91761
171
172 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
173 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
174 _edit_config(). Error logging casts 'error' to str
175
176 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
177 Exceptions received in CC are logged before being passed to the FE. Added
178 code to CC to handle exceptions *not* thrown by the installer itself.
179
180 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
181 get_max_mb_for_resize() returns -1 if not self.resizeable
182
183 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
184 More dirty rsync hacks :-/
185
186 29 Apr 2005; Preston Cody <codeman@gentoo.org>
187 Patches from chotchki (bug #90325) to improve CC networking. untested.
188
189 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
190 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
191 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
192 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
193 GLIStorageDevice as suggested by pychecker. Fix minor bug in
194 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
195 _get_packages_to_emerge()
196
197 28 Apr 2005; Preston Cody <codeman@gentoo.org>
198 Added group-adding code to set_users in ArchTemplate
199
200 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
201 Added post-install script code
202
203 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
204 Fixed encapsulation issues in GLIClientController (bug #90141)
205
206 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
207 Update resizing code in GLIStorageDevice
208
209 17 Apr 2005; Preston Cody <codeman@gentoo.org>
210 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
211
212 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
213 Reverted change to ArchTemplate and added support for commented line in old
214 code.
215
216 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
217 Changed _edit_config() to modify value in-place instead of commenting out and
218 adding the new value to the end of the file.
219
220 15 Apr 2005; Preston Cody <codeman@gentoo.org>
221 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
222 Also updated TODO list.
223
224 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
225 Use blackace's one-liner to add comments for all function for use with
226 pythondoc.
227
228 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
229 Moved 'end >= device_sectors' check out of loop to check for next partition's
230 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
231 Partitioning code now tracks start/end of extended for placing logicals. End
232 point of logical is now adjusted along with start.
233
234 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
235 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
236 the way of partitioning from a blank disk. Add int() around access to minor
237 key in partition information due to new partition code leaving them as float.
238
239 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
240 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
241
242 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
243 Major GLIStorageDevice overhaul...all MB now instead of sectors.
244
245 8 Apr 2005; Scott Myron <samyron@gentoo.org>
246 Added support for DHCP options and MAC addresses in the InstallProfile.
247
248 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
249 Changed mountopts check to work for blank and whitespace. Pipe emerge through
250 sed to properly strip out junk.
251
252 2 Apr 2005; Preston Cody <codeman@gentoo.org>
253 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
254 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
255
256 31 Mar 2005; Preston Cody <codeman@gentoo.org>
257 Fixed indent problem in GLICController
258
259 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
260 Check for disklabel type "loop" and use the device name without a minor.
261
262 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
263 Remove /tmp/compile_output.log and /var/log/install.log when install is
264 complete. Added code to (hopefully) keep 2nd thread running after install.
265 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
266 get_eth_info() function. Remove most of content in amd64ArchTemplate and
267 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
268
269 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
270 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
271 when unpacking tarball.
272
273 28 Mar 2005; Preston Cody <codeman@gentoo.org>
274 rewrote filesystem_tools. looks like it works so ripping out all the old
275 filesystem_tools code.
276
277 26 Mar 2005; Preston Cody <codeman@gentoo.org>
278 Changed the print statements to logging in the partitioning BE code.
279 the logger may need to be imported to the x86archtemplate. unknown yet.
280 Added the finishing_cleanup function.
281 added a fix to the logger from BenUrban
282
283 25 Mar 2005; Preston Cody <codeman@gentoo.org>
284 changed InstallProfile to remove is_uri check on kernel, stage, and portage
285 URIs. The blank uri check has been commented out.
286 ripped out error checking of set_services. this is done by _add_to_runlevel.
287
288 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
289 set_stage_tarball_uri() doesn't raise an exception on a blank string.
290
291 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
292 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
293 the install profile if available. Commented out spawn() debugging prints
294
295 23 Mar 2005; Preston Cody <codeman@gentoo.org>
296 small changes to setup_network_post. moved adding to runlevel of net.x to
297 after the device gets symlinked. added domainname runlevel command.
298
299 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
300 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
301 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
302 spawn() call in livecd-kernel code to pass environment variables.
303 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
304 the install profile if available.
305
306 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
307 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
308 to handle installing the livecd kernel into the new system.
309
310 22 Mar 2005; Preston Cody <codeman@gentoo.org>
311 should emerge hotplug and coldplug before adding them to runlevel.
312
313 21 Mar 2005; Preston Cody <codeman@gentoo.org>
314 took chroot out of grub_install command.
315
316 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
317 Changed chroot wrapper code in spawn() to write the wrapper the python way
318 instead of the bash way to avoid quote conflicts. Added
319 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
320 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
321 as it breaks the piping.
322
323 20 Mar 2005; Preston Cody <codeman@gentoo.org>
324 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
325
326 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
327 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
328 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
329 GLIInstallProfile.
330
331 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
332 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
333 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
334 into /mnt/gentoo in prepare_chroot()
335
336 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
337 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
338 retarted behavior regarding threads and signals. Add code to convert MB/%/*
339 to start/end sectors
340
341 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
342 Add 2>&1 to cmd in spawn()
343
344 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
345 Modified GLIUtility.exitsuccess() to work with return value from
346 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
347 creates wrapper script for commands run inside chroot so multiple commands
348 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
349 for the generated script from spawn()
350
351 16 Mar 2005; Preston Cody <codeman@gentoo.org>
352 Removed default values for stage tarball URI and portage tree URI from
353 InstallProfile. These should be set by the FEs. also added services step to
354 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
355 Possibly fixed CC DHCP bug with -n. (thx agaffney)
356
357 14 Mar 2005; Preston Cody <codeman@gentoo.org>
358 Small fix for setting the default gateway. Also added feature to dialogfe.
359
360 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
361 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
362
363 1 Mar 2005; Preston Cody <codeman@gentoo.org>
364 Fixed a bunch of true -> True typos. lots of em
365 only write new resolv.conf if there are dns servers listed.
366
367 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
368 Commented out 'display_on_tty8=True' in start_portmap()
369
370 18 Feb 2005; Preston Cody <codeman@gentoo.org>
371 added progress bar to dialogfe and fix logger bug in ArchTemplate.
372
373 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
374 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
375 lang parameter to __init__()
376
377 10 Feb 2005; Preston Cody <codeman@gentoo.org>
378 updates to TODO list.
379
380 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
381 Initial code for quickpkg GRP support. Fix loop to grab packages from
382 'emerge -p blah'
383
384 6 Feb 2005; Preston Cody <codeman@gentoo.org>
385 check for dhcp in the network stuff and emerge it if it is.
386 added quickpkg to TODO list
387
388 5 Feb 2005; Preston Cody <codeman@gentoo.org>
389 Changed the raising of 'warning' exceptions to a simple log of the error
390 so that the installer can continue.
391
392 3 Feb 2005; Preston Cody <codeman@gentoo.org>
393 Some big changes. First, changed most output to display_on_tty8.
394 Second, added log lines to all templates. Some smaller fixes such as typos.
395 Also did some cleanups of old commented lines.
396
397 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
398 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
399 Undo change with fix. Escaping fix in GLIStorageDevice.py
400
401 31 Jan 2005; Preston Cody <codeman@gentoo.org>
402 more updates to TODO list. hopefully we'll soon start removing items instead
403 of adding them.
404
405 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
406 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
407
408 27 Jan 2005; Preston Cody <codeman@gentoo.org>
409 updated TODO list. (again)
410
411 25 Jan 2005; Preston Cody <codeman@gentoo.org>
412 changed output of portmap start to display_on_tty8.
413 fixed bootloader for udev and multiple kernels
414 fixed custom kernel config (again)
415
416 22 Jan 2005; Preston Cody <codeman@gentoo.org>
417 changed default value of CC._enable_ssh to True because this is smart.
418 added code to allow custom kernel .config. may be unstable and break. sorry.
419
420 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
421 partition() now waits until after it checks for partition flags before delete
422 the partitions :P
423
424 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
425 Updated TODO. swapon failure it temporarily not an error. swapon is an error
426 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
427 blank.
428
429 19 Jan 2005; Preston Cody <codeman@gentoo.org>
430 Various fixes related to the add_users function. Still not yet finished.
431 Added things to the TODO list. Lets start using that!
432
433 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
434 Added code to x86Template to format newly created partitions. Also added
435 some error checking code. GLIStorageDevice passes 'minor' with data to
436 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
437 mounting code.
438
439 18 Jan 2005; Preston Cody <codeman@gentoo.org>
440 Took out unnecessary setting of random livecd root password. the cd already
441 sets it randomly.
442
443 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
444 Took out an unneeded step from CC's run()
445
446 15 Jan 2005; Preston Cody <codeman@gentoo.org>
447 Attempt at detecting and adding windows partitions to lilo.
448
449 14 Jan 2005; Preston Cody <codeman@gentoo.org>
450 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
451 partition. fixed misc exit_status => exitstatus typo.
452
453 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
454 Added basic code for resizing filesystems with pyparted. Fixed code for
455 resizing ntfs and ext2/3.
456
457 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
458 Fixed partition() in x86Template so that it scans through logicals and deletes
459 before deleting containing extended partition. Also clears partition table to
460 be safe before third pass.
461
462 08 Jan 2005; Preston Cody <codeman@gentoo.org>
463 Added mount_network_shares. not able to test it from this computer.
464 will test when i get back to school.
465 also added start_portmap to the client_controller as an always-do.
466 agaffney says this is needed for NFS mounts to work.
467
468 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
469 Partial rewrite of partitioning code in x86Template. No longer shells out to
470 parted to perform actions, now uses all pyparted calls. Code "works" in a
471 test, but still needs lots of TLC. Also modified tests/install.py to work
472 with x86Template and GLIClientConfiguration.
473
474 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
475 Initial move of partitioning code from ArchTemplate to x86Template.
476
477 07 Jan 2005; Preston Cody <codeman@gentoo.org>
478 Added grp_install and services to InstallProfile. forgot about the set_root_password
479
480 07 Jan 2005; Preston Cody <codeman@gentoo.org>
481 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
482 Test Install ran very well (skipping partitioning).
483
484 05 Jan 2005; Preston Cody <codeman@gentoo.org>
485 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
486 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
487 some may still have eluded me.
488
489 05 Jan 2005; Preston Cody <codeman@gentoo.org>
490 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
491 Just finished mount_local_partitions in GLIArchitectureTemplate
492
493 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
494 Added get_num_sectors() to GLIStorageDevice.
495
496 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
497 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
498 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
499 from GLIInstallProfile.
500
501 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
502 GLIStorageDevice returns "unknown" instead of "" for get_type()
503
504 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
505 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
506 actually work. Commented out resizability checking code for speed.
507
508 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
509 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
510 GLIStorageDevice at the suggestion of plors
511
512 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
513 Added a function to GLIUtility to pull a value from a make.conf-style config
514 file. Minor type fix to GLIInstallProfile.py
515
516 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
517 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
518 network mounts from partition data structure in GLIInstallProfile
519
520 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
521 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
522 can be resized.
523
524 27 Oct 2004; Preston Cody <codeman@gentoo.org>
525 Added some of the final functions to GLIInstallTemplate.
526 Yes this project is still active despite rare use of the Changelog!
527
528 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
529 Added the GLIPartitionTools.py file. This is a temporary insertion of
530 partitioning tools that will eventually go into their own package.
531
532 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
533 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
534 for the program). Added __init__(install_profile, client_configuration) to
535 GLI.InstallProfile. This sets install_profile and client_configuration once so as
536 to avoid constantly passing stuff every time we call a method.
537
538 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
539
540 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
541 files without messing up all the other stuff in them. This will be used for making
542 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
543
544 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
545
546 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
547 have a few basic things. I added two private methods. One is _depends(). This
548 will be used for dependency checking (ie. unpacking a tarball requires that
549 partitioning has been done). The other is _exec_in_chroot(). This is the exact
550 same syntax as os.system(), however, instead of being run in the liveCD
551 environment, it runs in the chroot. This requires a bit of fork() magic, so I
552 isolated the code. Hope to work more this week to get this class formed...
553
554 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
555
556 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
557 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
558 to allow for easier modification (mutable, rather than immutable objects). Updated
559 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
560 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
561 Added initial unit test code.
562
563 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
564
565 Added initial changelog. Setting up the basic structure of the CVS repository
566 for the project. Added the UML class diagram in docs. Added a skeletal GLI
567 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20