/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 704 - (show annotations) (download)
Wed Jun 22 06:00:21 2005 UTC (10 years, 1 month ago) by agaffney
File size: 31772 byte(s)
Modify get_eth_info() to take a full interface name (eth0 fex)
Actually commit ClientConfig screen with working pre-install net setup

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.257 2005/06/22 06:00:21 agaffney Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
8 Modify get_eth_info() to take a full interface name (eth0 fex).
9
10 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
11 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
12 instead of 'interfaces[interface][1]' since DHCP uses that field for its
13 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
14
15 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
16 Apply spawn() patch from #96644 (with minor changes). Make sure the return
17 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
18 small error with <pipe>.close() returning None. Fix space vs. tab issue.
19 Fix undefined variable 'output' issue in spawn().
20
21 20 Jun 2005; Preston Cody <codeman@gentoo.org>
22 More updates to GenDialog and gli-d.
23
24 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
25 Modify list_mirrors() to return a list of mirror URL/name pairs.
26
27 19 Jun 2005; Preston Cody <codeman@gentoo.org>
28 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
29 get subarch.
30
31 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
32 Backend partitioning will create disklabel is none exists. Installprofile
33 defaults to "" now instead of "msdos" for disklabel type. Fix for
34 mount_local_partitions() to remember device along with minor in the
35 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
36 add else block to log unsupported netmount types to mount_network_shares()
37
38 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
39 src/GLIArchitectureTemplate.py:
40 Refactor kernel_compile common stuff, fix 2.4 build process.
41 src/fe/cli/clife.py:
42 Logging system.
43 src/GLIUtility.py, src/GLIStorageDevice.py:
44 Add comments about re-writes needed for boxes without sysfs.
45
46 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
47 src/GLIArchitectureTemplate.py:
48 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
49 'make dep' call for custom compile. build_mode support for prepare-only and
50 none types completed. custom compile function chains shell functions in
51 spawned script, to allow for catching all errors.
52
53 15 Jun 2005; Preston Cody <codeman@gentoo.org>
54 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
55 and GenDialog. other gendialog updates as well. kernel updates untested.
56
57 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
58 src/GLIInstallProfile.py:
59 Change structure of etc-portage stuff. The serialization was broken before my
60 last commit, and I am the only person that's ever used it. The new schema is
61 as follows:
62 <etc-portage>
63 <file name="package.mask"/>
64 <file name="package.unmask">
65 <entry atom="sys-kernel/openmosix-sources"/>
66 </file>
67 <file name="package.use">
68 <entry atom="sys-libs/db">
69 -java
70 </entry>
71 <entry atom="dev-libs/cyrus-sasl">
72 -ldap
73 </entry>
74 </file>
75 </etc-portage>
76
77
78 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
79 src/GLIInstallProfile.py:
80 Add new entry for gli-profile/kernel-build-method item. Add missing
81 serialize_etc_portage (temporary). Make serialize_make_conf always print the
82 keys in the same order.
83
84 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
85 src/GLIArchitectureTemplate.py:
86 Clean up commenting used by _edit_config(), and fix bug where wrong comment
87 was repeatedly appended to make.conf.
88
89 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
90 src/GLIArchitectureTemplate.py:
91 Put some Linux-2.6 specific code under a if statement. Store list of
92 successfully mounted swap device for using swapoff. Add proper error checking
93 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
94 'file'. Clean up some redundant code (thanks to pychecker).'
95
96 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
97 Fix typos: get_extended() instead of get_extended_partition(). Added
98 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
99 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
100
101 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
102 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
103 in add_network_interface.
104
105 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
106 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
107 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
108 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
109 prepare_chroot.
110
111 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
112 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
113 +src/fe/installer-gtk:
114 Add new automated CLI frontend. Add scripts that are the intended means to
115 use each frontend.
116
117 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
118 src/GLIClientController.py:
119 Add null type to network config, for cases where the interface is already up
120 and should not be touched (netboot for example).
121
122 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
123 src/GLIArchitectureTemplate.py:
124 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
125 string!. Try to use binary packages if available by default.
126
127 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
128 src/GLIArchitectureTemplate.py:
129 More error checking for _add_to_runlevel, to ensure that the init script
130 actually exists before we try to add it. set_services phase must take place
131 after the package installation, otherwise the init scripts might not exist.
132 Find the correct init script for the cron and logging daemons, and add that
133 instead of the package atom.
134
135 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
136 src/GLIArchitectureTemplate.py:
137 Fix up _edit_config so that it works if the file doesn't already exist. Fix
138 usage of 'file' to 'contents' for the variable name, as it shadows
139 __builtin__.file.
140
141 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
142 src/GLIArchitectureTemplate.py:
143 Add MTA install code, and include MTA install phase. Ensure
144 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
145 for 'none' kernel config for build_kernel phase. Put kernel_script in
146 /var/tmp instead of /root for build_kernel phase.
147
148 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
149 Rename mta variables to match syslog/cron variables.
150
151 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
152 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
153 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
154 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
155 src/templates/.cvsignore, src/tests/.cvsignore:
156 Refactor partition formatting again to include error checking. Allow 'none'
157 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
158
159 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
160 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
161 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
162 only have a single spawn call.
163
164 11 Jun 2005; Preston Cody <codeman@gentoo.org>
165 refixed samyron's fix of set_architecture_template.
166
167 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
168 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
169 be executable.
170
171 10 Jun 2005; Scott Myron <samyron@gentoo.org>
172 Fixed one of the FIXME's in the ClientConfiguration. There is now some
173 error checking when you call set_architecture_template.
174
175 10 Jun 2005; Preston Cody <codeman@gentoo.org>
176 moved the mkfsopts input to the partition options menu instead of the during
177 the creation process. updated GenDialog to say it supports reiserfs v3.
178
179 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
180 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
181 Complete support for 'mkfsopts' parameter in main system and dialogfe.
182 Add support for other partition types to dialogfe.
183 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
184 avoid integer overflows and wraparounds.
185
186 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
187 Removed start/end from XML output and added mkfsopts to partitioning info.
188 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
189 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
190 in GLIClientConfiguration. Change from .1 and .9 to constants for
191 partitioning. Fix free space overwriting bug. Remove a few unused functions
192 from rewrite. Fix call to get_partition_at()
193
194 8 Jun 2005; Preston Cody <codeman@gentoo.org>
195 Updates to GenDialog and dialogfe.
196
197 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
198 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
199
200 6 Jun 2005; Preston Cody <codeman@gentoo.org>
201 more GenDialog updates to partitioning.
202
203 5 Jun 2005; Preston Cody <codeman@gentoo.org>
204 Indenting issue in GLISD/get_ordered_partition_list.
205 updates to GenDialog partitioning and added default UTC for timezone in IP.
206
207 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
208 Added GLISD.get_model()
209
210 3 Jun 2005; Preston Cody <codeman@gentoo.org>
211 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
212 More updates to GenDialog :)
213
214 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
215 Added get_interface_realname() function.
216
217 2 Jun 2005; Preston Cody <codeman@gentoo.org>
218 Added auto-save of CConfig and copying to new /root after install.
219 yet even more GenDialog updates.
220
221 1 Jun 2005; Preston Cody <codeman@gentoo.org>
222 removed print statement from GLISD. more updates to GenDialog.
223
224 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
225 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
226 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
227 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
228 places in GLIClientConfiguration.
229
230 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
231 Fix mount_local_partitions(), configure_fstab(), and
232 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
233 A few more fixes for templates/x86Archtemplate
234
235 27 May 2005; Preston Cody <codeman@gentoo.org>
236 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
237 a work in progress.
238
239 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
240 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
241 directly. GLISD can now handle data imported from XML.
242
243 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
244 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
245 handle blank (no disklabel) disks.
246
247 20 May 2005; Preston Cody <codeman@gentoo.org>
248 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
249 up, documented, and separated out serialization and grouped all sections.
250
251 19 May 2005; Preston Cody <codeman@gentoo.org>
252 Reorganization of ClientConfiguration and gutting of unused functions.
253 Removed verbose option from CC. Moved import statement in IP and CConfig up.
254
255 18 May 2005; Preston Cody <codeman@gentoo.org>
256 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
257
258 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
259 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
260 partitioning. CC serializes install profile to disk and prepare_chroot()
261 copies it into /mnt/gentoo/root
262
263 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
264 Moved URI parsing into new function parse_uri()
265
266 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
267 Added XMLParser module.
268
269 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
270 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
271 Minor fix to is_uri() regex to allow hyphens in hostname.
272
273 12 May 2005; Preston Cody <codeman@gentoo.org>
274 Updated finishing_cleanup for new unmounting method from agaffney.
275
276 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
277 Fix GLILogger to use correct time format string. Fix _edit_config() to
278 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
279 unicode support to is_realstring().
280
281 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
282 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
283 return value instead of non-zero. Add code to output a traceback to the
284 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
285 instead of --nocolor.
286
287 10 May 2005; Preston Cody <codeman@gentoo.org>
288 Added GLIGenDialog.py to make a generic class for the dialog functions that
289 can be used by both dialogfe and the netfe/be. updated both for new filename.
290 date changes. 2004->2005.
291
292 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
293 Removed 'quiet=True' from spawn() calls
294
295 10 May 2005; Preston Cody <codeman@gentoo.org>
296 Updated GLIUtility with patches from chotchki. Also added documentation
297
298 9 May 2005; Preston Cody <codeman@gentoo.org>
299 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
300 Updated _edit_config in ArchTemplate, make_config, and various other fixes
301 from bug #89683, mostly touchups.
302
303 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
304 GLIStorageDevice cleanup patch from bug #91761
305
306 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
307 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
308 _edit_config(). Error logging casts 'error' to str
309
310 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
311 Exceptions received in CC are logged before being passed to the FE. Added
312 code to CC to handle exceptions *not* thrown by the installer itself.
313
314 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
315 get_max_mb_for_resize() returns -1 if not self.resizeable
316
317 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
318 More dirty rsync hacks :-/
319
320 29 Apr 2005; Preston Cody <codeman@gentoo.org>
321 Patches from chotchki (bug #90325) to improve CC networking. untested.
322
323 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
324 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
325 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
326 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
327 GLIStorageDevice as suggested by pychecker. Fix minor bug in
328 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
329 _get_packages_to_emerge()
330
331 28 Apr 2005; Preston Cody <codeman@gentoo.org>
332 Added group-adding code to set_users in ArchTemplate
333
334 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
335 Added post-install script code
336
337 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
338 Fixed encapsulation issues in GLIClientController (bug #90141)
339
340 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
341 Update resizing code in GLIStorageDevice
342
343 17 Apr 2005; Preston Cody <codeman@gentoo.org>
344 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
345
346 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
347 Reverted change to ArchTemplate and added support for commented line in old
348 code.
349
350 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
351 Changed _edit_config() to modify value in-place instead of commenting out and
352 adding the new value to the end of the file.
353
354 15 Apr 2005; Preston Cody <codeman@gentoo.org>
355 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
356 Also updated TODO list.
357
358 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
359 Use blackace's one-liner to add comments for all function for use with
360 pythondoc.
361
362 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
363 Moved 'end >= device_sectors' check out of loop to check for next partition's
364 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
365 Partitioning code now tracks start/end of extended for placing logicals. End
366 point of logical is now adjusted along with start.
367
368 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
369 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
370 the way of partitioning from a blank disk. Add int() around access to minor
371 key in partition information due to new partition code leaving them as float.
372
373 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
374 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
375
376 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
377 Major GLIStorageDevice overhaul...all MB now instead of sectors.
378
379 8 Apr 2005; Scott Myron <samyron@gentoo.org>
380 Added support for DHCP options and MAC addresses in the InstallProfile.
381
382 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
383 Changed mountopts check to work for blank and whitespace. Pipe emerge through
384 sed to properly strip out junk.
385
386 2 Apr 2005; Preston Cody <codeman@gentoo.org>
387 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
388 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
389
390 31 Mar 2005; Preston Cody <codeman@gentoo.org>
391 Fixed indent problem in GLICController
392
393 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
394 Check for disklabel type "loop" and use the device name without a minor.
395
396 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
397 Remove /tmp/compile_output.log and /var/log/install.log when install is
398 complete. Added code to (hopefully) keep 2nd thread running after install.
399 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
400 get_eth_info() function. Remove most of content in amd64ArchTemplate and
401 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
402
403 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
404 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
405 when unpacking tarball.
406
407 28 Mar 2005; Preston Cody <codeman@gentoo.org>
408 rewrote filesystem_tools. looks like it works so ripping out all the old
409 filesystem_tools code.
410
411 26 Mar 2005; Preston Cody <codeman@gentoo.org>
412 Changed the print statements to logging in the partitioning BE code.
413 the logger may need to be imported to the x86archtemplate. unknown yet.
414 Added the finishing_cleanup function.
415 added a fix to the logger from BenUrban
416
417 25 Mar 2005; Preston Cody <codeman@gentoo.org>
418 changed InstallProfile to remove is_uri check on kernel, stage, and portage
419 URIs. The blank uri check has been commented out.
420 ripped out error checking of set_services. this is done by _add_to_runlevel.
421
422 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
423 set_stage_tarball_uri() doesn't raise an exception on a blank string.
424
425 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
426 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
427 the install profile if available. Commented out spawn() debugging prints
428
429 23 Mar 2005; Preston Cody <codeman@gentoo.org>
430 small changes to setup_network_post. moved adding to runlevel of net.x to
431 after the device gets symlinked. added domainname runlevel command.
432
433 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
434 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
435 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
436 spawn() call in livecd-kernel code to pass environment variables.
437 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
438 the install profile if available.
439
440 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
441 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
442 to handle installing the livecd kernel into the new system.
443
444 22 Mar 2005; Preston Cody <codeman@gentoo.org>
445 should emerge hotplug and coldplug before adding them to runlevel.
446
447 21 Mar 2005; Preston Cody <codeman@gentoo.org>
448 took chroot out of grub_install command.
449
450 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
451 Changed chroot wrapper code in spawn() to write the wrapper the python way
452 instead of the bash way to avoid quote conflicts. Added
453 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
454 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
455 as it breaks the piping.
456
457 20 Mar 2005; Preston Cody <codeman@gentoo.org>
458 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
459
460 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
461 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
462 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
463 GLIInstallProfile.
464
465 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
466 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
467 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
468 into /mnt/gentoo in prepare_chroot()
469
470 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
471 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
472 retarted behavior regarding threads and signals. Add code to convert MB/%/*
473 to start/end sectors
474
475 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
476 Add 2>&1 to cmd in spawn()
477
478 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
479 Modified GLIUtility.exitsuccess() to work with return value from
480 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
481 creates wrapper script for commands run inside chroot so multiple commands
482 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
483 for the generated script from spawn()
484
485 16 Mar 2005; Preston Cody <codeman@gentoo.org>
486 Removed default values for stage tarball URI and portage tree URI from
487 InstallProfile. These should be set by the FEs. also added services step to
488 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
489 Possibly fixed CC DHCP bug with -n. (thx agaffney)
490
491 14 Mar 2005; Preston Cody <codeman@gentoo.org>
492 Small fix for setting the default gateway. Also added feature to dialogfe.
493
494 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
495 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
496
497 1 Mar 2005; Preston Cody <codeman@gentoo.org>
498 Fixed a bunch of true -> True typos. lots of em
499 only write new resolv.conf if there are dns servers listed.
500
501 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
502 Commented out 'display_on_tty8=True' in start_portmap()
503
504 18 Feb 2005; Preston Cody <codeman@gentoo.org>
505 added progress bar to dialogfe and fix logger bug in ArchTemplate.
506
507 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
508 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
509 lang parameter to __init__()
510
511 10 Feb 2005; Preston Cody <codeman@gentoo.org>
512 updates to TODO list.
513
514 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
515 Initial code for quickpkg GRP support. Fix loop to grab packages from
516 'emerge -p blah'
517
518 6 Feb 2005; Preston Cody <codeman@gentoo.org>
519 check for dhcp in the network stuff and emerge it if it is.
520 added quickpkg to TODO list
521
522 5 Feb 2005; Preston Cody <codeman@gentoo.org>
523 Changed the raising of 'warning' exceptions to a simple log of the error
524 so that the installer can continue.
525
526 3 Feb 2005; Preston Cody <codeman@gentoo.org>
527 Some big changes. First, changed most output to display_on_tty8.
528 Second, added log lines to all templates. Some smaller fixes such as typos.
529 Also did some cleanups of old commented lines.
530
531 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
532 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
533 Undo change with fix. Escaping fix in GLIStorageDevice.py
534
535 31 Jan 2005; Preston Cody <codeman@gentoo.org>
536 more updates to TODO list. hopefully we'll soon start removing items instead
537 of adding them.
538
539 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
540 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
541
542 27 Jan 2005; Preston Cody <codeman@gentoo.org>
543 updated TODO list. (again)
544
545 25 Jan 2005; Preston Cody <codeman@gentoo.org>
546 changed output of portmap start to display_on_tty8.
547 fixed bootloader for udev and multiple kernels
548 fixed custom kernel config (again)
549
550 22 Jan 2005; Preston Cody <codeman@gentoo.org>
551 changed default value of CC._enable_ssh to True because this is smart.
552 added code to allow custom kernel .config. may be unstable and break. sorry.
553
554 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
555 partition() now waits until after it checks for partition flags before delete
556 the partitions :P
557
558 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
559 Updated TODO. swapon failure it temporarily not an error. swapon is an error
560 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
561 blank.
562
563 19 Jan 2005; Preston Cody <codeman@gentoo.org>
564 Various fixes related to the add_users function. Still not yet finished.
565 Added things to the TODO list. Lets start using that!
566
567 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
568 Added code to x86Template to format newly created partitions. Also added
569 some error checking code. GLIStorageDevice passes 'minor' with data to
570 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
571 mounting code.
572
573 18 Jan 2005; Preston Cody <codeman@gentoo.org>
574 Took out unnecessary setting of random livecd root password. the cd already
575 sets it randomly.
576
577 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
578 Took out an unneeded step from CC's run()
579
580 15 Jan 2005; Preston Cody <codeman@gentoo.org>
581 Attempt at detecting and adding windows partitions to lilo.
582
583 14 Jan 2005; Preston Cody <codeman@gentoo.org>
584 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
585 partition. fixed misc exit_status => exitstatus typo.
586
587 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
588 Added basic code for resizing filesystems with pyparted. Fixed code for
589 resizing ntfs and ext2/3.
590
591 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
592 Fixed partition() in x86Template so that it scans through logicals and deletes
593 before deleting containing extended partition. Also clears partition table to
594 be safe before third pass.
595
596 08 Jan 2005; Preston Cody <codeman@gentoo.org>
597 Added mount_network_shares. not able to test it from this computer.
598 will test when i get back to school.
599 also added start_portmap to the client_controller as an always-do.
600 agaffney says this is needed for NFS mounts to work.
601
602 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
603 Partial rewrite of partitioning code in x86Template. No longer shells out to
604 parted to perform actions, now uses all pyparted calls. Code "works" in a
605 test, but still needs lots of TLC. Also modified tests/install.py to work
606 with x86Template and GLIClientConfiguration.
607
608 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
609 Initial move of partitioning code from ArchTemplate to x86Template.
610
611 07 Jan 2005; Preston Cody <codeman@gentoo.org>
612 Added grp_install and services to InstallProfile. forgot about the set_root_password
613
614 07 Jan 2005; Preston Cody <codeman@gentoo.org>
615 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
616 Test Install ran very well (skipping partitioning).
617
618 05 Jan 2005; Preston Cody <codeman@gentoo.org>
619 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
620 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
621 some may still have eluded me.
622
623 05 Jan 2005; Preston Cody <codeman@gentoo.org>
624 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
625 Just finished mount_local_partitions in GLIArchitectureTemplate
626
627 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
628 Added get_num_sectors() to GLIStorageDevice.
629
630 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
631 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
632 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
633 from GLIInstallProfile.
634
635 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
636 GLIStorageDevice returns "unknown" instead of "" for get_type()
637
638 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
639 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
640 actually work. Commented out resizability checking code for speed.
641
642 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
643 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
644 GLIStorageDevice at the suggestion of plors
645
646 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
647 Added a function to GLIUtility to pull a value from a make.conf-style config
648 file. Minor type fix to GLIInstallProfile.py
649
650 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
651 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
652 network mounts from partition data structure in GLIInstallProfile
653
654 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
655 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
656 can be resized.
657
658 27 Oct 2004; Preston Cody <codeman@gentoo.org>
659 Added some of the final functions to GLIInstallTemplate.
660 Yes this project is still active despite rare use of the Changelog!
661
662 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
663 Added the GLIPartitionTools.py file. This is a temporary insertion of
664 partitioning tools that will eventually go into their own package.
665
666 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
667 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
668 for the program). Added __init__(install_profile, client_configuration) to
669 GLI.InstallProfile. This sets install_profile and client_configuration once so as
670 to avoid constantly passing stuff every time we call a method.
671
672 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
673
674 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
675 files without messing up all the other stuff in them. This will be used for making
676 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
677
678 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
679
680 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
681 have a few basic things. I added two private methods. One is _depends(). This
682 will be used for dependency checking (ie. unpacking a tarball requires that
683 partitioning has been done). The other is _exec_in_chroot(). This is the exact
684 same syntax as os.system(), however, instead of being run in the liveCD
685 environment, it runs in the chroot. This requires a bit of fork() magic, so I
686 isolated the code. Hope to work more this week to get this class formed...
687
688 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
689
690 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
691 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
692 to allow for easier modification (mutable, rather than immutable objects). Updated
693 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
694 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
695 Added initial unit test code.
696
697 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
698
699 Added initial changelog. Setting up the basic structure of the CVS repository
700 for the project. Added the UML class diagram in docs. Added a skeletal GLI
701 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20