/[gli]/trunk/ChangeLog
Gentoo

Contents of /trunk/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log


Revision 705 - (show annotations) (download)
Wed Jun 22 21:21:52 2005 UTC (11 years, 3 months ago) by agaffney
File size: 31860 byte(s)
float() instead of int() in add_partition_device_partition() for minor (closes 96804)

1 # ChangeLog for Gentoo Linux Installer
2 # Copyright 2005 Gentoo Technologies, Inc.
3 # $Header: /var/cvsroot/gentoo/src/installer/ChangeLog,v 1.258 2005/06/22 21:21:52 agaffney Exp $
4
5 *GLI-0.1_alpha (4 Apr 2005)
6
7 22 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
8 Modify get_eth_info() to take a full interface name (eth0 fex). float()
9 instead of int() in add_partition_device_partition() for minor (closes 96804)
10
11 21 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
12 Changed setup_network_post to check for 'interfaces[interface][0] != "dhcp"'
13 instead of 'interfaces[interface][1]' since DHCP uses that field for its
14 options. setup_network_post() writes custom DHCP options to /etc/conf.d/net.
15
16 20 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
17 Apply spawn() patch from #96644 (with minor changes). Make sure the return
18 value from all spawn() calls is checked with GLIUtility.exitsuccess(). Fix
19 small error with <pipe>.close() returning None. Fix space vs. tab issue.
20 Fix undefined variable 'output' issue in spawn().
21
22 20 Jun 2005; Preston Cody <codeman@gentoo.org>
23 More updates to GenDialog and gli-d.
24
25 19 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
26 Modify list_mirrors() to return a list of mirror URL/name pairs.
27
28 19 Jun 2005; Preston Cody <codeman@gentoo.org>
29 Adding gli-dialog.py. Updates to GenDialog. Added function to GLIUtility to
30 get subarch.
31
32 16 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
33 Backend partitioning will create disklabel is none exists. Installprofile
34 defaults to "" now instead of "msdos" for disklabel type. Fix for
35 mount_local_partitions() to remember device along with minor in the
36 parts_to_mount dict (closes #96319). mount_local_partitions() cleanups and
37 add else block to log unsupported netmount types to mount_network_shares()
38
39 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
40 src/GLIArchitectureTemplate.py:
41 Refactor kernel_compile common stuff, fix 2.4 build process.
42 src/fe/cli/clife.py:
43 Logging system.
44 src/GLIUtility.py, src/GLIStorageDevice.py:
45 Add comments about re-writes needed for boxes without sysfs.
46
47 15 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
48 src/GLIArchitectureTemplate.py:
49 2.4 support (pull version data from /usr/src/linux/Makefile), incl.
50 'make dep' call for custom compile. build_mode support for prepare-only and
51 none types completed. custom compile function chains shell functions in
52 spawned script, to allow for catching all errors.
53
54 15 Jun 2005; Preston Cody <codeman@gentoo.org>
55 fixed up build_kernel in ArchTemplate for build_mode as well as in dialogfe
56 and GenDialog. other gendialog updates as well. kernel updates untested.
57
58 14 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
59 src/GLIInstallProfile.py:
60 Change structure of etc-portage stuff. The serialization was broken before my
61 last commit, and I am the only person that's ever used it. The new schema is
62 as follows:
63 <etc-portage>
64 <file name="package.mask"/>
65 <file name="package.unmask">
66 <entry atom="sys-kernel/openmosix-sources"/>
67 </file>
68 <file name="package.use">
69 <entry atom="sys-libs/db">
70 -java
71 </entry>
72 <entry atom="dev-libs/cyrus-sasl">
73 -ldap
74 </entry>
75 </file>
76 </etc-portage>
77
78
79 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
80 src/GLIInstallProfile.py:
81 Add new entry for gli-profile/kernel-build-method item. Add missing
82 serialize_etc_portage (temporary). Make serialize_make_conf always print the
83 keys in the same order.
84
85 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
86 src/GLIArchitectureTemplate.py:
87 Clean up commenting used by _edit_config(), and fix bug where wrong comment
88 was repeatedly appended to make.conf.
89
90 13 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
91 src/GLIArchitectureTemplate.py:
92 Put some Linux-2.6 specific code under a if statement. Store list of
93 successfully mounted swap device for using swapoff. Add proper error checking
94 to install_packages and install_filesystem_tools. Fixed namespace conflicts on
95 'file'. Clean up some redundant code (thanks to pychecker).'
96
97 13 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
98 Fix typos: get_extended() instead of get_extended_partition(). Added
99 list_mirrors() and list_stage_tarballs_from_mirror() functions to GLIUtility.
100 Change _emerge("sync") call to direct call to spawn to avoid 'emerge -k sync'
101
102 12 Jun 2005; John N. Laliberte <allanonjl@gentoo.org>
103 GLIInstallProfile.py: add missing set for dhcp_options if a tuple is passed
104 in add_network_interface.
105
106 12 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIArchitectureTemplate.py:
107 ensure PORTAGE_TMPDIR/PORT_LOGDIR/PORTDIR_OVERLAY/PKGDIR exist prior to any
108 usage - this caused a failure for stage1/stage2 previously. swapoff for swap
109 space at end of install. Mount /dev, /dev/shm, /dev/pts and /sys during
110 prepare_chroot.
111
112 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> +src/cli/clife.py,
113 +src/cli/README, +src/fe/installer-cli, +src/fe/installer-dialog,
114 +src/fe/installer-gtk:
115 Add new automated CLI frontend. Add scripts that are the intended means to
116 use each frontend.
117
118 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
119 src/GLIClientController.py:
120 Add null type to network config, for cases where the interface is already up
121 and should not be touched (netboot for example).
122
123 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
124 src/GLIArchitectureTemplate.py:
125 pcmcia is not a variable name for a call to _add_to_runlevel, it should be a
126 string!. Try to use binary packages if available by default.
127
128 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
129 src/GLIArchitectureTemplate.py:
130 More error checking for _add_to_runlevel, to ensure that the init script
131 actually exists before we try to add it. set_services phase must take place
132 after the package installation, otherwise the init scripts might not exist.
133 Find the correct init script for the cron and logging daemons, and add that
134 instead of the package atom.
135
136 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
137 src/GLIArchitectureTemplate.py:
138 Fix up _edit_config so that it works if the file doesn't already exist. Fix
139 usage of 'file' to 'contents' for the variable name, as it shadows
140 __builtin__.file.
141
142 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
143 src/GLIArchitectureTemplate.py:
144 Add MTA install code, and include MTA install phase. Ensure
145 PORT_LOGDIR/PORTDIR_OVERLAY are created in _emerge if needed. Add support
146 for 'none' kernel config for build_kernel phase. Put kernel_script in
147 /var/tmp instead of /root for build_kernel phase.
148
149 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py:
150 Rename mta variables to match syslog/cron variables.
151
152 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
153 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py,
154 src/.cvsignore, src/fe/dialog/.cvsignore, src/fe/gtk/.cvsignore,
155 src/fe/net/client/.cvsignore, src/fe/net/server/.cvsignore,
156 src/templates/.cvsignore, src/tests/.cvsignore:
157 Refactor partition formatting again to include error checking. Allow 'none'
158 for kernel and bootloader specifications. Add .cvsignore files for .py[co].
159
160 11 Jun 2005; Robin H. Johnson <robbat2@gentoo.org>
161 src/GLIArchitectureTemplate.py, src/templates/x86ArchitectureTemplate.py:
162 Refactor _emerge to remove duplicate code. Refactor mkfs code in backend to
163 only have a single spawn call.
164
165 11 Jun 2005; Preston Cody <codeman@gentoo.org>
166 refixed samyron's fix of set_architecture_template.
167
168 11 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
169 Move /tmp/spawn.sh and /tmp/post-install to /var/tmp since that should always
170 be executable.
171
172 10 Jun 2005; Scott Myron <samyron@gentoo.org>
173 Fixed one of the FIXME's in the ClientConfiguration. There is now some
174 error checking when you call set_architecture_template.
175
176 10 Jun 2005; Preston Cody <codeman@gentoo.org>
177 moved the mkfsopts input to the partition options menu instead of the during
178 the creation process. updated GenDialog to say it supports reiserfs v3.
179
180 9 Jun 2005; Robin H. Johnson <robbat2@gentoo.org> src/GLIInstallProfile.py,
181 src/GLIStorageDevice.py, fe/dialog/dialogfe.py:
182 Complete support for 'mkfsopts' parameter in main system and dialogfe.
183 Add support for other partition types to dialogfe.
184 Fix all usages of int(possible_big_number) to long(possible_bit_number) to
185 avoid integer overflows and wraparounds.
186
187 9 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
188 Removed start/end from XML output and added mkfsopts to partitioning info.
189 'mkfsopts' parameter is now used and support for creating xfs, jfs, and
190 reiserfs is now in (patch from robbat2). Change '_parser' to 'self._parser'
191 in GLIClientConfiguration. Change from .1 and .9 to constants for
192 partitioning. Fix free space overwriting bug. Remove a few unused functions
193 from rewrite. Fix call to get_partition_at()
194
195 8 Jun 2005; Preston Cody <codeman@gentoo.org>
196 Updates to GenDialog and dialogfe.
197
198 7 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
199 Typo (%$^&#$!) fix in GLIStorageDevice. Minor fix recommended by pychecker
200
201 6 Jun 2005; Preston Cody <codeman@gentoo.org>
202 more GenDialog updates to partitioning.
203
204 5 Jun 2005; Preston Cody <codeman@gentoo.org>
205 Indenting issue in GLISD/get_ordered_partition_list.
206 updates to GenDialog partitioning and added default UTC for timezone in IP.
207
208 5 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
209 Added GLISD.get_model()
210
211 3 Jun 2005; Preston Cody <codeman@gentoo.org>
212 Added get_eth_devices() to GLIUtility. Updated netfe.py to newest version.
213 More updates to GenDialog :)
214
215 3 Jun 2005; Andrew Gaffney <agaffney@gentoo.org>
216 Added get_interface_realname() function.
217
218 2 Jun 2005; Preston Cody <codeman@gentoo.org>
219 Added auto-save of CConfig and copying to new /root after install.
220 yet even more GenDialog updates.
221
222 1 Jun 2005; Preston Cody <codeman@gentoo.org>
223 removed print statement from GLISD. more updates to GenDialog.
224
225 31 May 2005; Andrew Gaffney <agaffney@gentoo.org>
226 Not being able to fetch the stage tarball is now an exception. Chroot wrapper
227 passes along exit code. Fix typo in GLIStorageDevice causing mountopts to be
228 loaded from XML as ['mountopts']. Changed 'data' to 'self.data' in a few
229 places in GLIClientConfiguration.
230
231 27 May 2005; Andrew Gaffney <agaffney@gentoo.org>
232 Fix mount_local_partitions(), configure_fstab(), and
233 install_filesystem_tools() to use GLISD directly. A few more fixes for same.
234 A few more fixes for templates/x86Archtemplate
235
236 27 May 2005; Preston Cody <codeman@gentoo.org>
237 Removed more unused code from CConfig. Updated GLIGenDialog, but it is still
238 a work in progress.
239
240 24 May 2005; Andrew Gaffney <agaffney@gentoo.org>
241 Changes in IP, GLISD, and templates/x86Archtemplate for IP using GLISD
242 directly. GLISD can now handle data imported from XML.
243
244 22 May 2005; Andrew Gaffney <agaffney@gentoo.org>
245 Missing colon in GLIClientConfiguration. Add fix to GLIStorageDevice to
246 handle blank (no disklabel) disks.
247
248 20 May 2005; Preston Cody <codeman@gentoo.org>
249 HUGE Reorganization of the InstallProfile. All sections alphabetized, cleaned
250 up, documented, and separated out serialization and grouped all sections.
251
252 19 May 2005; Preston Cody <codeman@gentoo.org>
253 Reorganization of ClientConfiguration and gutting of unused functions.
254 Removed verbose option from CC. Moved import statement in IP and CConfig up.
255
256 18 May 2005; Preston Cody <codeman@gentoo.org>
257 Fix use of /mnt/gentoo instead of _chroot_dir in finishing_cleanup
258
259 17 May 2005; Andrew Gaffney <agaffney@gentoo.org>
260 Fixed bug in finishing_cleanup(). Fix a late-night coding error in
261 partitioning. CC serializes install profile to disk and prepare_chroot()
262 copies it into /mnt/gentoo/root
263
264 16 May 2005; Andrew Gaffney <agaffney@gentoo.org>
265 Moved URI parsing into new function parse_uri()
266
267 14 May 2005; Andrew Gaffney <agaffney@gentoo.org>
268 Added XMLParser module.
269
270 13 May 2005; Andrew Gaffney <agaffney@gentoo.org>
271 Fix is_realstring() and rewrite is_uri() to use a regex to parse the URI.
272 Minor fix to is_uri() regex to allow hyphens in hostname.
273
274 12 May 2005; Preston Cody <codeman@gentoo.org>
275 Updated finishing_cleanup for new unmounting method from agaffney.
276
277 12 May 2005; Andrew Gaffney <agaffney@gentoo.org>
278 Fix GLILogger to use correct time format string. Fix _edit_config() to
279 properly comment out variables. Fix minor bug in finishing_cleanup(). Add
280 unicode support to is_realstring().
281
282 11 May 2005; Andrew Gaffney <agaffney@gentoo.org>
283 Added --nocolor to all emerge calls. Fix is_eth_device to test for zero
284 return value instead of non-zero. Add code to output a traceback to the
285 install log in the event of a GLI or non-GLI exception. Use NOCOLOR=yes
286 instead of --nocolor.
287
288 10 May 2005; Preston Cody <codeman@gentoo.org>
289 Added GLIGenDialog.py to make a generic class for the dialog functions that
290 can be used by both dialogfe and the netfe/be. updated both for new filename.
291 date changes. 2004->2005.
292
293 10 May 2005; Andrew Gaffney <agaffney@gentoo.org>
294 Removed 'quiet=True' from spawn() calls
295
296 10 May 2005; Preston Cody <codeman@gentoo.org>
297 Updated GLIUtility with patches from chotchki. Also added documentation
298
299 9 May 2005; Preston Cody <codeman@gentoo.org>
300 Added the function for set_etc_portage to ArchTemplate. no step for it yet.
301 Updated _edit_config in ArchTemplate, make_config, and various other fixes
302 from bug #89683, mostly touchups.
303
304 6 May 2005; Andrew Gaffney <agaffney@gentoo.org>
305 GLIStorageDevice cleanup patch from bug #91761
306
307 3 May 2005; Andrew Gaffney <agaffney@gentoo.org>
308 Fixed timezone code to not link to /mnt/gentoo/usr/share/zoneinfo/blah. Fix
309 _edit_config(). Error logging casts 'error' to str
310
311 2 May 2005; Andrew Gaffney <agaffney@gentoo.org>
312 Exceptions received in CC are logged before being passed to the FE. Added
313 code to CC to handle exceptions *not* thrown by the installer itself.
314
315 1 May 2005; Andrew Gaffney <agaffney@gentoo.org>
316 get_max_mb_for_resize() returns -1 if not self.resizeable
317
318 30 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
319 More dirty rsync hacks :-/
320
321 29 Apr 2005; Preston Cody <codeman@gentoo.org>
322 Patches from chotchki (bug #90325) to improve CC networking. untested.
323
324 29 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
325 Proxies patch from chotchki (bug #90147). Fixed == instead of = typos in
326 GLIStorageDevice (pointed out by chotchki). Fixed missing int()s. Split
327 'custom' sync option into 'none' and 'snapshot'. Minor fixes to
328 GLIStorageDevice as suggested by pychecker. Fix minor bug in
329 _get_packages_to_emerge(). Fix _quickpkg_deps() to call
330 _get_packages_to_emerge()
331
332 28 Apr 2005; Preston Cody <codeman@gentoo.org>
333 Added group-adding code to set_users in ArchTemplate
334
335 27 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
336 Added post-install script code
337
338 23 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
339 Fixed encapsulation issues in GLIClientController (bug #90141)
340
341 22 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
342 Update resizing code in GLIStorageDevice
343
344 17 Apr 2005; Preston Cody <codeman@gentoo.org>
345 Update AUTHORS, NEWS, TODO. Added documentation to GLILogger.
346
347 17 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
348 Reverted change to ArchTemplate and added support for commented line in old
349 code.
350
351 16 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
352 Changed _edit_config() to modify value in-place instead of commenting out and
353 adding the new value to the end of the file.
354
355 15 Apr 2005; Preston Cody <codeman@gentoo.org>
356 Back. Did the docuementation thang for ArchTemplate and ClientConfiguration.
357 Also updated TODO list.
358
359 14 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
360 Use blackace's one-liner to add comments for all function for use with
361 pythondoc.
362
363 13 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
364 Moved 'end >= device_sectors' check out of loop to check for next partition's
365 start point (thanks to Marco Djukic). Fix >4 primary partitions on non-x86.
366 Partitioning code now tracks start/end of extended for placing logicals. End
367 point of logical is now adjusted along with start.
368
369 11 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
370 Finish overhaul of backend partitioning code. Fixed all bugs that stood in
371 the way of partitioning from a blank disk. Add int() around access to minor
372 key in partition information due to new partition code leaving them as float.
373
374 10 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
375 tidy_partitions() function in GLIStorageDevice. Tweaks to tidy code
376
377 9 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
378 Major GLIStorageDevice overhaul...all MB now instead of sectors.
379
380 8 Apr 2005; Scott Myron <samyron@gentoo.org>
381 Added support for DHCP options and MAC addresses in the InstallProfile.
382
383 3 Apr 2005; Andrew Gaffney <agaffney@gentoo.org>
384 Changed mountopts check to work for blank and whitespace. Pipe emerge through
385 sed to properly strip out junk.
386
387 2 Apr 2005; Preston Cody <codeman@gentoo.org>
388 fixed the way set_timezone works. added hotplug/coldplug for livecd-kernel
389 added --emptytree to stage2. fixed ethx not being added to runlevel defalt.
390
391 31 Mar 2005; Preston Cody <codeman@gentoo.org>
392 Fixed indent problem in GLICController
393
394 30 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
395 Check for disklabel type "loop" and use the device name without a minor.
396
397 29 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
398 Remove /tmp/compile_output.log and /var/log/install.log when install is
399 complete. Added code to (hopefully) keep 2nd thread running after install.
400 Patch from zahna for extra arguments to the kernel. Patch from zahna to add
401 get_eth_info() function. Remove most of content in amd64ArchTemplate and
402 make it inherit from x86Archtemplate. kernel_args -> bootloader_kernel_args
403
404 28 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
405 Added 'append_log=True' to all spawn() calls using logfile=. Append to log
406 when unpacking tarball.
407
408 28 Mar 2005; Preston Cody <codeman@gentoo.org>
409 rewrote filesystem_tools. looks like it works so ripping out all the old
410 filesystem_tools code.
411
412 26 Mar 2005; Preston Cody <codeman@gentoo.org>
413 Changed the print statements to logging in the partitioning BE code.
414 the logger may need to be imported to the x86archtemplate. unknown yet.
415 Added the finishing_cleanup function.
416 added a fix to the logger from BenUrban
417
418 25 Mar 2005; Preston Cody <codeman@gentoo.org>
419 changed InstallProfile to remove is_uri check on kernel, stage, and portage
420 URIs. The blank uri check has been commented out.
421 ripped out error checking of set_services. this is done by _add_to_runlevel.
422
423 25 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
424 set_stage_tarball_uri() doesn't raise an exception on a blank string.
425
426 24 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
427 GRP-ish quickpkg code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
428 the install profile if available. Commented out spawn() debugging prints
429
430 23 Mar 2005; Preston Cody <codeman@gentoo.org>
431 small changes to setup_network_post. moved adding to runlevel of net.x to
432 after the device gets symlinked. added domainname runlevel command.
433
434 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
435 minor fix (hopefully) to livecd-kernel code. Removed call to mkvardb in
436 livecd-kernel code as it's now done by catalyst. Switch _emerge() call to
437 spawn() call in livecd-kernel code to pass environment variables.
438 livecd-kernel code pulls PKGDIR and PORTAGE_TMPDIR from make.conf info in
439 the install profile if available.
440
441 23 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
442 Added code to build_kernel() and emerge_kernel_sources() in ArchTemplate
443 to handle installing the livecd kernel into the new system.
444
445 22 Mar 2005; Preston Cody <codeman@gentoo.org>
446 should emerge hotplug and coldplug before adding them to runlevel.
447
448 21 Mar 2005; Preston Cody <codeman@gentoo.org>
449 took chroot out of grub_install command.
450
451 21 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
452 Changed chroot wrapper code in spawn() to write the wrapper the python way
453 instead of the bash way to avoid quote conflicts. Added
454 'logfile=self._compile_logfile' to a number of spawn() calls. Added new
455 hash_password() function to GLIUtility. Remove command to 'rm /tmp/spawn.sh'
456 as it breaks the piping.
457
458 20 Mar 2005; Preston Cody <codeman@gentoo.org>
459 Added the amd64ArchitectureTemplate, mostly a copy of x86 without lilo.
460
461 20 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
462 Added _get_packages_to_emerge() to GLIArchitectureTemplate and calls in
463 stage1() and stage2(). Added 'origminor' parameter to GLIStorageDevice and
464 GLIInstallProfile.
465
466 19 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
467 Fixed a couple bugs in add_netmount() in GLIInstallProfile. spawn() outputs
468 to the actual tty8 with display_on_tty8 flag. Compile output logfile moved
469 into /mnt/gentoo in prepare_chroot()
470
471 18 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
472 Add sigunmask.c contributed by d_m (on freenode) to counteract python's
473 retarted behavior regarding threads and signals. Add code to convert MB/%/*
474 to start/end sectors
475
476 17 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
477 Add 2>&1 to cmd in spawn()
478
479 16 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
480 Modified GLIUtility.exitsuccess() to work with return value from
481 commands.getstatusoutput instead of os.waitpid(). spawn() automatically
482 creates wrapper script for commands run inside chroot so multiple commands
483 and redirection can be used. Change exitsuccess() back. Added 'chmod a+x'
484 for the generated script from spawn()
485
486 16 Mar 2005; Preston Cody <codeman@gentoo.org>
487 Removed default values for stage tarball URI and portage tree URI from
488 InstallProfile. These should be set by the FEs. also added services step to
489 ArchTemplate and coldplug/hotplug runlevels to the genkernel step.
490 Possibly fixed CC DHCP bug with -n. (thx agaffney)
491
492 14 Mar 2005; Preston Cody <codeman@gentoo.org>
493 Small fix for setting the default gateway. Also added feature to dialogfe.
494
495 7 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
496 Switched spawn() over to commands.getstatusoutput() instead of fork/waitpid
497
498 1 Mar 2005; Preston Cody <codeman@gentoo.org>
499 Fixed a bunch of true -> True typos. lots of em
500 only write new resolv.conf if there are dns servers listed.
501
502 1 Mar 2005; Andrew Gaffney <agaffney@gentoo.org>
503 Commented out 'display_on_tty8=True' in start_portmap()
504
505 18 Feb 2005; Preston Cody <codeman@gentoo.org>
506 added progress bar to dialogfe and fix logger bug in ArchTemplate.
507
508 18 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
509 Created GLISayWhat module. Renamed GLISayWhat to GLILocalization. Moved
510 lang parameter to __init__()
511
512 10 Feb 2005; Preston Cody <codeman@gentoo.org>
513 updates to TODO list.
514
515 6 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
516 Initial code for quickpkg GRP support. Fix loop to grab packages from
517 'emerge -p blah'
518
519 6 Feb 2005; Preston Cody <codeman@gentoo.org>
520 check for dhcp in the network stuff and emerge it if it is.
521 added quickpkg to TODO list
522
523 5 Feb 2005; Preston Cody <codeman@gentoo.org>
524 Changed the raising of 'warning' exceptions to a simple log of the error
525 so that the installer can continue.
526
527 3 Feb 2005; Preston Cody <codeman@gentoo.org>
528 Some big changes. First, changed most output to display_on_tty8.
529 Second, added log lines to all templates. Some smaller fixes such as typos.
530 Also did some cleanups of old commented lines.
531
532 1 Feb 2005; Andrew Gaffney <agaffney@gentoo.org>
533 Changed tty8 output to a fifo. Minor GLIStorageDevice fix thanks to BenUrban.
534 Undo change with fix. Escaping fix in GLIStorageDevice.py
535
536 31 Jan 2005; Preston Cody <codeman@gentoo.org>
537 more updates to TODO list. hopefully we'll soon start removing items instead
538 of adding them.
539
540 29 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
541 Changed the way GLIStorageDevice.get_max_sectors_for_resize() works
542
543 27 Jan 2005; Preston Cody <codeman@gentoo.org>
544 updated TODO list. (again)
545
546 25 Jan 2005; Preston Cody <codeman@gentoo.org>
547 changed output of portmap start to display_on_tty8.
548 fixed bootloader for udev and multiple kernels
549 fixed custom kernel config (again)
550
551 22 Jan 2005; Preston Cody <codeman@gentoo.org>
552 changed default value of CC._enable_ssh to True because this is smart.
553 added code to allow custom kernel .config. may be unstable and break. sorry.
554
555 21 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
556 partition() now waits until after it checks for partition flags before delete
557 the partitions :P
558
559 19 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
560 Updated TODO. swapon failure it temporarily not an error. swapon is an error
561 again. is_uri() check only performed on portage_tree_snapshot_uri if it isn't
562 blank.
563
564 19 Jan 2005; Preston Cody <codeman@gentoo.org>
565 Various fixes related to the add_users function. Still not yet finished.
566 Added things to the TODO list. Lets start using that!
567
568 18 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
569 Added code to x86Template to format newly created partitions. Also added
570 some error checking code. GLIStorageDevice passes 'minor' with data to
571 InstallProfile. Added partition() call back in ArchTemplate. Fixed NFS
572 mounting code.
573
574 18 Jan 2005; Preston Cody <codeman@gentoo.org>
575 Took out unnecessary setting of random livecd root password. the cd already
576 sets it randomly.
577
578 15 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
579 Took out an unneeded step from CC's run()
580
581 15 Jan 2005; Preston Cody <codeman@gentoo.org>
582 Attempt at detecting and adding windows partitions to lilo.
583
584 14 Jan 2005; Preston Cody <codeman@gentoo.org>
585 Added lilo code and cleaned up lilo code. also do_partitioning renamed to
586 partition. fixed misc exit_status => exitstatus typo.
587
588 11 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
589 Added basic code for resizing filesystems with pyparted. Fixed code for
590 resizing ntfs and ext2/3.
591
592 10 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
593 Fixed partition() in x86Template so that it scans through logicals and deletes
594 before deleting containing extended partition. Also clears partition table to
595 be safe before third pass.
596
597 08 Jan 2005; Preston Cody <codeman@gentoo.org>
598 Added mount_network_shares. not able to test it from this computer.
599 will test when i get back to school.
600 also added start_portmap to the client_controller as an always-do.
601 agaffney says this is needed for NFS mounts to work.
602
603 08 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
604 Partial rewrite of partitioning code in x86Template. No longer shells out to
605 parted to perform actions, now uses all pyparted calls. Code "works" in a
606 test, but still needs lots of TLC. Also modified tests/install.py to work
607 with x86Template and GLIClientConfiguration.
608
609 07 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
610 Initial move of partitioning code from ArchTemplate to x86Template.
611
612 07 Jan 2005; Preston Cody <codeman@gentoo.org>
613 Added grp_install and services to InstallProfile. forgot about the set_root_password
614
615 07 Jan 2005; Preston Cody <codeman@gentoo.org>
616 Fixed a few more edit_configs. fixed a chroot multicommand bug thanks to agaffney.
617 Test Install ran very well (skipping partitioning).
618
619 05 Jan 2005; Preston Cody <codeman@gentoo.org>
620 My mid-day update. rewrote mount_local_partitions for order of mounting. fixed prepare_chroot
621 rewrote configure_fstab and install_bootloader for new partition format. fixed a few _edit_configs.
622 some may still have eluded me.
623
624 05 Jan 2005; Preston Cody <codeman@gentoo.org>
625 Overhauled the entire ArchTemplate and did a lot of other misc fixes in order to test it.
626 Just finished mount_local_partitions in GLIArchitectureTemplate
627
628 05 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
629 Added get_num_sectors() to GLIStorageDevice.
630
631 04 Jan 2005; Andrew Gaffney <agaffney@gentoo.org>
632 GLIStorageDevice now tracks partition boundaries in sectors instead of cylinders.
633 Also now ignores <=100 sectors for free space. Removed remaining depends stuff
634 from GLIInstallProfile.
635
636 20 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
637 GLIStorageDevice returns "unknown" instead of "" for get_type()
638
639 19 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
640 Added get_extended_partition() to GLIStorageDevice. Rewrote get_logicals() to
641 actually work. Commented out resizability checking code for speed.
642
643 17 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
644 Switched to using dumpe2fs to determine free space left in ext2/3 filesystem in
645 GLIStorageDevice at the suggestion of plors
646
647 10 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
648 Added a function to GLIUtility to pull a value from a make.conf-style config
649 file. Minor type fix to GLIInstallProfile.py
650
651 09 Dec 2004; Andrew Gaffney <agaffney@gentoo.org>
652 Added code in GLIArchitectureTemplate.py to write netmounts into fstab. Separated
653 network mounts from partition data structure in GLIInstallProfile
654
655 27 Nov 2004; Andrew Gaffney <agaffney@gentoo.org>
656 Changed the way GLIStorageDevice.py determines the amount a ext2/3 filesystem
657 can be resized.
658
659 27 Oct 2004; Preston Cody <codeman@gentoo.org>
660 Added some of the final functions to GLIInstallTemplate.
661 Yes this project is still active despite rare use of the Changelog!
662
663 11 Jun 2004; Nathaniel McCallum <npmccallum@gentoo.org>
664 Added the GLIPartitionTools.py file. This is a temporary insertion of
665 partitioning tools that will eventually go into their own package.
666
667 27 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
668 Added InstallProfileTODO.txt. Added GLIClientConfiguration.py (contains run-time
669 for the program). Added __init__(install_profile, client_configuration) to
670 GLI.InstallProfile. This sets install_profile and client_configuration once so as
671 to avoid constantly passing stuff every time we call a method.
672
673 26 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
674
675 Added another private method to GLI.InstallTemplate. _edit_config() modifies config
676 files without messing up all the other stuff in them. This will be used for making
677 changes to make.conf, rc.conf, /etc/conf.d/net, etc...
678
679 25 Mar 2004; Nathaniel McCallum <npmccallum@gentoo.org>
680
681 Added GLI.InstallTemplate framework. This is not yet functional. However, it does
682 have a few basic things. I added two private methods. One is _depends(). This
683 will be used for dependency checking (ie. unpacking a tarball requires that
684 partitioning has been done). The other is _exec_in_chroot(). This is the exact
685 same syntax as os.system(), however, instead of being run in the liveCD
686 environment, it runs in the chroot. This requires a bit of fork() magic, so I
687 isolated the code. Hope to work more this week to get this class formed...
688
689 14 Feb 2004; Eric Sammer <esammer@gentoo.org>
690
691 Added SAX parsing. Made GLI.InstallProfile a subclass of xml.sax.ContentHandler for
692 obvious reasons. Switched kernel_modules and users to be lists instead of tuples
693 to allow for easier modification (mutable, rather than immutable objects). Updated
694 existing pydoc and added more. Implemented body of GLI.InstallProfile.parse().
695 Cleaned file format of GLI.py a bit. Fixed all accessors to use self references.
696 Added initial unit test code.
697
698 9 Feb 2004; Eric Sammer <esammer@gentoo.org>
699
700 Added initial changelog. Setting up the basic structure of the CVS repository
701 for the project. Added the UML class diagram in docs. Added a skeletal GLI
702 python module. Added misc files such news, authors, etc.

Properties

Name Value
svn:eol-style native

  ViewVC Help
Powered by ViewVC 1.1.20