/[livecd-tools]/trunk/autoconfig
Gentoo

Diff of /trunk/autoconfig

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 49 Revision 83
1#!/sbin/runscript 1#!/sbin/runscript
2# Copyright 1999-2005 Gentoo Foundation 2# Copyright 1999-2005 Gentoo Foundation
3# Distributed under the terms of the GNU General Public License v2 3# Distributed under the terms of the GNU General Public License v2
4# $Header: /var/cvsroot/gentoo/src/livecd-tools/autoconfig,v 1.25 2005/05/12 13:04:27 wolf31o2 Exp $ 4# $Header: /var/cvsroot/gentoo/src/livecd-tools/autoconfig,v 1.48 2005/11/11 16:00:28 wolf31o2 Exp $
5 5
6echo "0" > /proc/sys/kernel/printk
7DHCP="yes" 6DHCP="yes"
8DETECT="yes" 7DETECT="yes"
9GPM="yes" 8GPM="yes"
10PCMCIA="no" 9PCMCIA="no"
11HOTPLUG="yes" 10HOTPLUG="yes"
12APM="no" 11APM="no"
13ACPI="no" 12ACPI="no"
14IDEDMA="yes" 13IDEDMA="yes"
14ALSA="yes"
15X11="yes"
16
17get_config() {
15CMDLINE="`cat /proc/cmdline`" 18 CMDLINE="$(cat /proc/cmdline)"
19
16for x in ${CMDLINE} ; do 20 for x in ${CMDLINE} ; do
17 if [ "${x}" = "nodetect" ]; then 21 case "${x}" in
22 nodetect)
18 DETECT="no" 23 DETECT="no"
19 GPM="no" 24 GPM="no"
20 HOTPLUG="no" 25 HOTPLUG="no"
21 APM="no" 26 APM="no"
22 ACPI="no" 27 ACPI="no"
23 fi 28 ALSA="no"
24 29 X11="no"
25 if [ "${x}" = "nodhcp" ]; then 30 ;;
31 nodhcp)
26 DHCP="no" 32 DHCP="no"
27 fi 33 ;;
28 34 nogpm)
29 if [ "${x}" = "nogpm" ]; then
30 GPM="no" 35 GPM="no"
31 fi 36 ;;
32 37 dopcmcia)
33 if [ "${x}" = "dopcmcia" ]; then
34 PCMCIA="yes" 38 PCMCIA="yes"
35 fi 39 ;;
36 40 doapm)
37 if [ "${x}" = "doapm" ]; then
38 APM="yes" 41 APM="yes"
39 ACPI="no" 42 ACPI="no"
40 fi 43 ;;
41 44 acpi=on|acpi=force)
42 if [ "${x}" = "acpi=on" -o "${x}" = "acpi=force" ]; then
43 APM="no" 45 APM="no"
44 ACPI="yes" 46 ACPI="yes"
45 fi 47 ;;
46 48 ide=nodma)
47 if [ "${x}" = "ide=nodma" ]; then
48 IDEDMA="no" 49 IDEDMA="no"
49 fi 50 ;;
50 51 nohotplug)
51 if [ "${x}" = "nohotplug" ]; then
52 HOTPLUG="no" 52 HOTPLUG="no"
53 fi 53 ;;
54 nosound)
55 ALSA="no"
56 ;;
57 nox)
58 X11="no"
59 ;;
60 esac
54done 61 done
62}
55 63
56depend() { 64depend() {
57 need modules 65 need modules
58 use alsasound 66 before net
59# provide gpm pcmcia apmd acpid coldplug 67# provide gpm pcmcia apmd acpid coldplug hdparm alsasound x-setup
68}
69
70# Checks whether a service will be started by autoconfig.
71# Usage: check_svc var service [service_alternative]
72check_svc() {
73 if [ "$1" = "yes" ]
74 then
75 if [ -x "/etc/init.d/$2" ]
76 then
77 echo "$2"
78 elif [ -n "$3" -a -x "/etc/init.d/$3" ]
79 then
80 echo "$3"
81 fi
82 fi
83}
84
85# Prints an ordered list of services that will be started by autoconfig.
86list_services() {
87 get_config
88
89 local svcs="$(check_svc ${APM} apmd)"
90 svcs="${svcs} $(check_svc ${ACPI} acpid)"
91 svcs="${svcs} $(check_svc ${IDEDMA} hdparm)"
92 svcs="${svcs} $(check_svc ${PCMCIA} pcmcia)"
93 svcs="${svcs} $(check_svc ${GPM} gpm)"
94 svcs="${svcs} $(check_svc ${HOTPLUG} coldplug hotplug)"
95 svcs="${svcs} $(check_svc ${ALSA} alsasound)"
96
97 echo ${svcs}
98}
99
100# Only used on SGI CDs, this determines:
101# A) CPU Type
102# B) System
103detect_mips() {
104 local cpuinfo="$(awk -F: '/^cpu model/{printf $2};/^$/{print ""}' /proc/cpuinfo 2>/dev/null | head -n 1 | cut -d" " -f2,3)"
105 local machinfo="$(awk -F: '/^system type/{printf $2};/^$/{print ""}' /proc/cpuinfo 2>/dev/null | cut -d" " -f2-)"
106 local machtype=""
107
108 case "${machinfo}" in
109 "SGI Indy")
110 machtype="SGI Indy" # Indy R4x00/R5000
111 ;;
112 "SGI Indigo2")
113 case "${cpuinfo}" in
114 R4*)
115 machtype="SGI Indigo2" # I2 R4x00
116 ;;
117 R8*)
118 machtype="SGI Indigo2 Power" # I2 R8000
119 ;;
120 R10*)
121 machtype="SGI Indigo2 Impact" # I2 R10000
122 ;;
123 esac
124 ;;
125 "SGI O2"|"SGI IP32")
126 machtype="SGI O2" # O2 R5K/RM5K2/RM7K/R10K/R12K
127 ;;
128 "SGI Octane"|"SGI IP30")
129 machtype="SGI Octane" # Octane R10K/R12K/R14K
130 ;;
131 "SGI Origin"|"SGI IP27")
132 machtype="SGI Origin" # Origin R10K/R12K
133 ;;
134 *)
135 machtype="Unknown SGI MIPS" # ???
136 ;;
137 esac
138
139 PC="Detected an ${machtype} w/ ${numcpu} ${cpuinfo} ${bit}"
140}
141
142detect_x86_amd64() {
143 local cpuinfo="$(awk -F: '/^model name/{printf $2};/^$/{print ""}' /proc/cpuinfo 2>/dev/null | head -n 1)"
144 local mhz="$(awk -F: '/^cpu MHz/{printf " %dMHz",int($2)};/^$/{print ""}' /proc/cpuinfo 2>/dev/null | head -n 1)"
145
146 PC="Detected ${numcpu} ${cpuinfo} ${mhz} ${bit}"
60} 147}
61 148
62start() { 149start() {
150 echo "0" > /proc/sys/kernel/printk
151 get_config
63 if [ "${DETECT}" = "yes" ]; then 152 if [ "${DETECT}" = "yes" ]
153 then
64 ebegin ${WARN}"Hardware detection started" 154 ebegin "Hardware detection started"
155 local numcpu="$(awk -F: '/^processor/{printf $2};/^$/{print ""}' /proc/cpuinfo 2>/dev/null | wc -l)"
156 local arch="$(uname -m)"
157 local ismips="no"
158 [ "${numcpu}" -gt '1' ] && bit="CPUs" || bit="CPU"
159 case ${arch} in
160 mips|mips64)
161 detect_mips
162 ismips="yes"
163 ;;
164 i?86|x86_64)
165 detect_x86_amd64
166 ;;
167 *)
65 PC=`awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null` 168 PC="$(awk -F: '/^processor/{printf "Processor"$2" is"};/^model name/{printf $2};/^vendor_id/{printf vendor};/^cpu MHz/{printf " %dMHz",int($2)};/^cache size/{printf ","$2" Cache"};/^$/{print ""}' /proc/cpuinfo 2>/dev/null)"
66 ebegin ${GOOD}"${PC}" 169 ;;
67 eend 170 esac
171 einfo "${PC}"
68 [ -x /usr/sbin/hwsetup ] && hwsetup -p >/dev/null 172 [ -x /usr/sbin/hwsetup ] && hwsetup -p >/dev/null
69 eend 173 eend
70 else 174 else
71 ebegin ${WARN}"Hardware detection disabled via cmdline$NORMAL" 175 ewarn "Hardware detection disabled via cmdline ..."
72 fi 176 fi
73 177
74 if [ "${APM}" = "yes" ]; then 178 if [ "${APM}" = "yes" ]
75 modprobe apm power_off=1 >/dev/null 2>&1 && ebegin ${GOOD}"APM BIOS found, power management functions enabled.${NORMAL}" 179 then
76 [ -x /etc/init.d/apmd ] && /etc/init.d/apmd start 180 modprobe apm power_off=1 >/dev/null 2>&1 && \
181 einfo "APM BIOS found, power management functions enabled ..."
182 [ -x /etc/init.d/apmd ] && start_service apmd
77 else 183 else
78 ebegin ${GOOD}"Not Loading APM Bios support.${NORMAL}" 184 [ "${ismips}" = "no" ] && ewarn "Not Loading APM Bios support ..."
79 eend
80 fi 185 fi
81 186
82 if [ "${ACPI}" = "yes" ]; then 187 if [ "${ACPI}" = "yes" ]
83 modprobe processor >/dev/null 2>&1 && ebegin ${GOOD} ACPI power management functions enabled.${NORMAL} && modprobe thermal >/dev/null 188 then
189 modprobe processor >/dev/null 2>&1 && \
190 ebegin "ACPI power management functions enabled" && \
191 modprobe thermal >/dev/null
84 modprobe fan >/dev/null 2>&1 192 modprobe fan >/dev/null 2>&1
85 modprobe button >/dev/null 2>&1 193 modprobe button >/dev/null 2>&1
86 modprobe battery >/dev/null 2>&1 194 modprobe battery >/dev/null 2>&1
87 modprobe ac >/dev/null 2>&1 195 modprobe ac >/dev/null 2>&1
88 [ -x /etc/init.d/acpid ] && /etc/init.d/acpid start 196 [ -x /etc/init.d/acpid ] && start_service acpid
89 eend 197 eend
198 else
199 [ "${ismips}" = "no" ] && ewarn "Not Loading ACPI support ..."
90 fi 200 fi
91 201
92 if [ "${IDEDMA}" = "yes" ]; then 202 if [ "${IDEDMA}" = "yes" ]
93 [ -x /etc/init.d/hdparm ] && /etc/init.d/hdparm start 203 then
204 if [ "${ismips}" = "no" ]; then
205 [ -x /etc/init.d/hdparm ] && start_service hdparm
94 fi 206 fi
207 fi
95 208
96 if [ "${PCMCIA}" = "yes" ]; then 209 if [ "${PCMCIA}" = "yes" ]
210 then
97 ebegin ${HILITE} "PCMCIA enabled via cmdline" 211 einfo "PCMCIA enabled via cmdline ..."
98 /etc/init.d/pcmcia start 212 [ -x /etc/init.d/pcmcia ] && start_service pcmcia
99 fi 213 fi
100 214
101 if [ "${DHCP}" = "no" ]; then 215 if [ "${DHCP}" = "no" ]
216 then
102 sed -i -e '/^ifconfig_eth.*dhcp.*/ s/^/#/' \ 217 sed -i -e '/^ifconfig_eth.*dhcp.*/ s/^/#/' \
103 -e '/^iface_eth.*dhcp.*/ s/^/#/' \ 218 -e '/^iface_eth.*dhcp.*/ s/^/#/' \
219 -e '/^config_eth.*dhcp.*/ s/^/#/' \
104 /etc/conf.d/net 220 /etc/conf.d/net
105 ebegin ${BAD}"Skipping DHCP broadcast detection as requested on boot commandline." 221 ewarn "Skipping DHCP broadcast detection as requested on boot commandline ..."
106 fi 222 fi
107 223
108 #Read in what hwsetup has found 224 # Read in what hwsetup has found
109 [ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix 225 [ -f /etc/sysconfig/knoppix ] && . /etc/sysconfig/knoppix
226 [ -f /etc/sysconfig/gentoo ] && . /etc/sysconfig/gentoo
110 227
111 # Mouse 228 # Mouse
112 if [ -n "${MOUSE_DEVICE}" ]; then 229 if [ -n "${MOUSE_DEVICE}" ]
230 then
113 ebegin ${GOOD}"Mouse is ${HILITE}${MOUSE_FULLNAME}${GOOD} at ${HILITE}${MOUSE_DEVICE}${NORMAL}" 231 einfo "Mouse is ${HILITE}${MOUSE_FULLNAME}${NORMAL} at ${HILITE}${MOUSE_DEVICE}${NORMAL} ..."
114 source /etc/sysconfig/mouse 232 source /etc/sysconfig/mouse
115 if [ -x /usr/sbin/gpm ]; then 233 if [ -x /usr/sbin/gpm ]
234 then
116 if [ `grep "#MOUSE=${MOUSETYPE}" /etc/conf.d/gpm` ]; then 235 [ $(grep "#MOUSE=${MOUSETYPE}" /etc/conf.d/gpm) ] \
117 sed -i "\@MOUSE=${MOUSETYPE}@s@^#@@" /etc/conf.d/gpm 236 && sed -i "\@MOUSE=${MOUSETYPE}@s@^#@@" /etc/conf.d/gpm \
237 || echo "MOUSE=${MOUSETYPE}" >>/etc/conf.d/gpm
238
239 [ $(grep "#MOUSEDEV=${DEVICE}" /etc/conf.d/gpm) ] \
240 && sed -i "\@MOUSEDEV=${DEVICE}@s@^#@@" /etc/conf.d/gpm \
241 || echo "MOUSEDEV=${DEVICE}" >>/etc/conf.d/gpm
242
243 [ "${GPM}" = "yes" ] \
244 && [ -x /etc/init.d/gpm ] && start_service gpm
245 fi
246 fi
247
248 if [ "${HOTPLUG}" = "yes" ]
249 then
250 # Check whether we should be using hotplug or coldplug
251 if [ -x /etc/init.d/coldplug ]
252 then
253 start_service coldplug
254 elif [ -x /etc/init.d/hotplug ]
255 then
256 start_service hotplug
257 fi
258 else
259 ewarn "Hotplug disabled via cmdline ..."
260 fi
261
262 [ "${DETECT}" = "no" ] && DHCP="no"
263 [ "${DETECT}" = "yes" ] \
264 && NETDEVICES="$(awk -F: '/eth.:|tr.:|ath.:|wlan.:/{print $1}' /proc/net/dev 2>/dev/null)"
265
266 if [ -n "${NETDEVICES}" ]
267 then
268 for nics in ${NETDEVICES}
269 do
270 if [ "${DHCP}" = "yes" ]
271 then
272 einfo "Network device ${HILITE}${nics}${NORMAL} detected, DHCP broadcasting for IP ..."
273 dhcpcd -n -h $(hostname) &
274 fi
275 done
276 else
277 ewarn "No Network device auto detected ..."
278 fi
279
280 if [ "${ALSA}" = "yes" ]
281 then
282 if [ -n "${SOUND_FULLNAME}" -o -n "${SOUND_DRIVER}" ]
283 then
284 local sndmsg="Soundcard:\n"
285
286 [ -n "${SOUND_FULLNAME}" ] \
287 && sndmsg="${sndmsg} ${WARN}${SOUND_FULLNAME}\n"
288 [ -n "${SOUND_DRIVER}" ] \
289 && sndmsg="${sndmsg} driver = ${SOUND_DRIVER}\n"
290
291 einfo "${sndmsg}"
292
293
294 if [ -x /etc/init.d/alsasound ]
295 then
296 start_service alsasound
118 else 297 else
119 echo "MOUSE=${MOUSETYPE}" >>/etc/conf.d/gpm 298 ewarn "/etc/init.d/alsasound not found, skipping ..."
299 ewarn "You will need to set volume controls manually ..."
120 fi 300 fi
121 if [ `grep "#MOUSEDEV=${DEVICE}" /etc/conf.d/gpm` ]; then 301
122 sed -i "\@MOUSEDEV=${DEVICE}@s@^#@@" /etc/conf.d/gpm 302 if [ -e /proc/asound/cards ]
123 else 303 then
124 echo "MOUSEDEV=${DEVICE}" >>/etc/conf.d/gpm 304 for i in $(cat /proc/asound/cards | cut -d" " -f1)
305 do
306 if [ -d /proc/asound/card$i ] && [ -x /usr/bin/amixer ]
307 then
308 amixer -c $i scontrols > /etc/amixer
309 [ -n "$(grep Master /etc/amixer)" ] \
310 && amixer -c $i -q set Master 95% unmute \
311 >/dev/null 2>&1
312 [ -n "$(grep PCM /etc/amixer)" ] \
313 && amixer -c $i -q set PCM 95% unmute \
314 >/dev/null 2>&1
315 [ -n "$(grep Mic /etc/amixer)" ] \
316 && amixer -c $i -q set Mic 95% mute cap \
317 >/dev/null 2>&1
318 [ -n "$(grep Wave /etc/amixer)" ] \
319 && amixer -c $i -q set Wave 95% unmute \
320 >/dev/null 2>&1
321 [ -n "$(grep Capture /etc/amixer)" ] \
322 && amixer -c $i -q set Capture 95% unmute cap \
323 >/dev/null 2>&1
125 fi 324 fi
126 if [ "$GPM" = "yes" ]; then 325 done
127 [ -x /etc/init.d/gpm ] && /etc/init.d/gpm start
128 fi 326 fi
129 fi 327 fi
130 eend
131 fi
132
133 if [ "${HOTPLUG}" = "yes" ]; then
134 #Check whether we should be using hotplug or coldplug
135 if [ -x /etc/init.d/coldplug ]; then
136 /etc/init.d/coldplug start
137 else 328 else
138 [ -x /etc/init.d/hotplug ] && /etc/init.d/hotplug start 329 ewarn "Skipping ALSA detection as requested on boot commandline ..."
139 fi 330 fi
140 else
141 ebegin ${BAD}"Hotplug disabled via cmdline${NORMAL}"
142 fi
143 331
144 if [ "${DETECT}" = "no" ]; then
145 DHCP="no"
146 fi
147
148 if [ "${DETECT}" = "yes" ]; then 332 if [ "${DETECT}" = "yes" ]
149 NETDEVICES="`awk -F: '/eth.:|tr.:/{print $1}' /proc/net/dev 2>/dev/null`" 333 then
150 fi 334 [ -x /etc/init.d/x-setup ] && schedule_service_startup x-setup
151
152 if [ -n "${NETDEVICES}" ]; then
153 if [ "${DHCP}" = "yes" ]; then
154 ebegin ${GOOD}"Network device${HILITE}${NETDEVICES}${GOOD} detected,${WARN} DHCP broadcasting for IP.${NORMAL}"
155 dhcpcd -h $(hostname) &
156 fi 335 fi
157 eend
158 336
159 else 337 [ "${X11}" = "no" ] && touch /etc/init.d/.noxdm
160 ebegin ${BAD}"No Network device auto detected.${NORMAL}" 338 [ -n "${XDESC}" ] && einfo "VideoCard: ${HILITE}${XDESC}${NORMAL}"
161 fi
162
163
164 if [ -n "${SOUND_FULLNAME}" -o -n "${SOUND_DRIVER}" ]; then
165 ebegin ${GOOD}"Soundcard:"
166 eend
167 [ -n "${SOUND_FULLNAME}" ]
168 ebegin " ${WARN}${SOUND_FULLNAME}"
169 [ -n "${SOUND_DRIVER}" ]
170 ebegin ${WARN}" driver = ${SOUND_DRIVER}"${HILITE}
171 if [ -d /proc/asound/card0 ] && [ -x /usr/bin/amixer ]; then
172 amixer scontrols > /etc/amixer
173 if [ -n "`grep Master /etc/amixer`" ]
174 then
175 amixer -q set Master 95% unmute >/dev/null 2>&1
176 fi
177 if [ -n "`grep PCM /etc/amixer`" ]
178 then
179 amixer -q set PCM 95% unmute >/dev/null 2>&1
180 fi
181 if [ -n "`grep Mic /etc/amixer`" ]
182 then
183 amixer -q set Mic 95% unmute cap >/dev/null 2>&1
184 fi
185 if [ -n "`grep Wave /etc/amixer`" ]
186 then
187 amixer -q set Wave 95% unmute >/dev/null 2>&1
188 fi
189 if [ -n "`grep Capture /etc/amixer`" ]
190 then
191 amixer -q set Capture 95% unmute cap >/dev/null 2>&1
192 fi
193 fi
194 fi
195
196
197 if [ -n "${XDESC}" -o -n "${XDESC}" ]; then
198 ebegin ${GOOD}"VideoCard: ${WARN} ${XDESC}"
199 eend
200 fi
201 339
202 killall hwsetup 2>/dev/null 340 killall hwsetup 2>/dev/null
203 echo "6" > /proc/sys/kernel/printk 341 echo "6" > /proc/sys/kernel/printk
204
205} 342}
206 343
207# vim: ts=4 344# vim: ts=4

Legend:
Removed from v.49  
changed lines
  Added in v.83

  ViewVC Help
Powered by ViewVC 1.1.20