/[gentoo-src]/rc-scripts/ChangeLog
Gentoo

Diff of /rc-scripts/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.319 Revision 1.410
1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts 1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts
2# Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL 2# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPL
3# Written by Daniel Robbins (drobbins@gentoo.org) 3# Written by Daniel Robbins (drobbins@gentoo.org)
4
5 06 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
6
7 Update to net-scripts 1.0.2 from Roy
8 ------------------------------------
9 - wireless module: replaced preferred_only var with
10 associate_order this makes more sense now as we have changed the
11 possible values
12 - wireless module: added patch from Daniel Zappala we should call
13 wireless_get_essid everywhere now
14 - wireless module: don't declare ESSID local in
15 wireless_configure(). This allows ESSID to be tested in the
16 user defined postup() function
17 - wireless module: test type != "NOT READY!" instead of testing =
18 IEEE. this resolves problems with intel and ra-tech drivers
19 - net.lo start() now errors when the interface does not exist
20 - dhcpcd, dhclient, udhcpc and pump now expose peer_* vars this
21 enables wireless to map them from peer_dns_ESSID
22 - config-system helper now loads wireless module to remap
23 variables from ESSID this allows udhcpc and dhclient to use
24 remapped wireless vars
25 - fixed dhcpcd and pump modules using peer_* vars
26 - wireless aborts after 5 seconds if it cannot report a valid
27 ESSID this fixes a potential infinite loop problem
28 - wireless_setup_iface() renamed to wireless_map_essid_vars() this
29 avoids confusion about what the function actually does
30
31 06 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
32
33 Change the default net.ipv4.conf.default.rp_filter setting to 1
34 in sysctl.conf since it shouldn't be harmful in anyway. Redhat
35 does the same.
36
37 05 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
38
39 Get rid of getcols() in sbin/functions.sh. Use COLUMNS when
40 possible and otherwise clean up the COLS code. Fix the "emerge
41 depend" detection code to use RC_ENDCOL="no"
42
43 05 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
44
45 Changed behavior of the domainname init.d script. It will now
46 override any settings obtained via dhcp/whatever. See #48277.
47
48 Updated bootmisc to dump the output of `dmesg` to /var/log/dmesg.
49 This way users have an 'after-boot' log of their dmesg saved
50 somewhere useful #55421.
51
52 Added the 'eend' back to depscan.sh since the script starts with a
53 call to 'ebegin' #59694.
54
55 Add selinux update from Chris PeBenito for src/runscript.c #64019.
56
57 Add more quoting to rc-help.sh to fix some non-critical errors.
58 Make rc-help.sh respect the value of RC_NOCOLOR. Allow RC_NOCOLOR
59 in functions.sh to be set via the environment.
60
61 Flesh out the default sysctl.conf with comments and more examples
62 since our previous one was pretty sparse #59993.
63
64 Change calls to `uniq` to `sort -u` in checkroot/halt.sh. This way
65 we only require sort in / and not both #36453.
66
67 04 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
68
69 More (I mean a LOT more) services. This takes care of #44458,
70 #52881 #55939 #58997 #66166 #66297. Gleaned many from the IANA
71 list/Fedora/FreeBSD/Debian.
72
73 Change the test for /proc/cmdline from -e to -r. On grsecurity
74 based systems for example, the file may exist, but not be readable
75 by non-root users (patch by Ned Ludd).
76
77 03 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
78
79 Add support for NFSv4 from #25106 to the netmount script. Don't
80 try to fsck / if the root is a remote filesystem (like NFS) #36624.
81
82 Update the fs_passno values in the default fstab to match the
83 settings suggested by the manpage #37314. Make checkroot respect
84 a fs_passno setting of 0 when dealing with / #39212. Change
85 default / filesystem type to ext3 instead of xfs #42670.
86
87 Re-order the arguements to mount to match POSIX requirements #66225.
88
89 Don't pipe swapon in localmount to /dev/null and ignore return
90 codes anymore. A swapon that works shows no output #39834.
91
92 02 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
93
94 Break up the COL/COLOR code properly this time. Not all serial
95 consoles can handle adjusting to the end of the line, so let's not
96 bother running stty at all anymore. This should fix up #32453.
97
98 30 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
99
100 Disable cryptfs by default in the conf.d file. Also cleanup
101 the output generated in localmount/checkfs/halt.sh for dm-crypt.
102 Add an extra check so that cryptfs is only run when the conf.d
103 file exists as well as /bin/cryptsetup.
104
105 29 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
106
107 Let glibc install nscd since different versions of glibc will
108 need to be handled differently. See #43076 by Rui Malheiro.
109
110 29 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
111
112 Prefer ~/.dir_colors over /etc/DIR_COLORS when it exists #64489
113
114 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
115
116 Clear the screen in .bash_logout #32330
117
118* rc-scripts 1.6.1 (27 Sep 2004)
119
120 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
121
122 Update dm-crypt to work with multi-line configuration files.
123 Also don't set status in a subshell; it was being lost before.
124
125 23 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
126
127 Rework the logic behind the $COLS code. It should not depend
128 on whether color is enabled. Also add a check for negative
129 values (like when using a serial console).
130
131* rc-scripts 1.6.0 (15 Sep 2004)
132
133 15 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
134
135 Fix bug 64034: simplify netmount script's stop function so that
136 mountpoints containing spaces work correctly
137
138 Update tarball.sh to use net-scripts
139
140 14 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
141
142 Commit dm-crypt enablement patch from Tigger (Rob Holland) in
143 bug 43146
144
145* rc-scripts 1.5.3 (18 Aug 2004)
146
147 18 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
148
149 Fix bug 60719 (request for better error messages from runscript)
150 by allowing errors to show on the screen when they're encountered
151 in wrap_rcscript
152
153 Apply Spock's bootsplash patch from bug 45784. This moves most of
154 the splash functionality out of baselayout.
155
156 13 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
157
158 Don't export PS1. Continuation of bug 26951, comments 60-62.
159
160* rc-scripts 1.5.2 (02 Aug 2004)
161
162 02 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
163
164 Related to bug 38955, don't set INPUTRC. Instead patch bash so
165 that it looks for /etc/inputrc automatically if ~/.inputrc is
166 missing. This is better than using INPUTRC since that will
167 override even after the user creates ~/.inputrc.
168
169 Fix bug 54275: Don't set INFODIR. The correct variable used by
170 texinfo is INFOPATH, which is already set in 00basic. Setting
171 INFODIR is useless, and breaks a NetBSD cross compile from Gentoo
172
173 01 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
174
175 Fix bug 58805: net.eth0 should use bridge so that bridge
176 interfaces are configured prior to net.br0 running
177
178 Fix bug 56856: Get rid of net.rej and integrate missing stuff to
179 conf.d/net
180
181 Apply half of spock's patch in bug 45784: Check for
182 conf.d/bootsplash instead of conf.d/bootsplash.conf
183
184 Fix bug 51351: Quote parsed output of /proc/filesystems to handle
185 octal sequences in mountpoint such as encoded spaces (\040)
186
187 Fix bug 46680: Add cifs support to localmount and netmount.
188 Thanks to Ronald Moesbergen for the patches
189
190 21 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
191
192 Fix bug 26952: Use /etc/bash/bashrc to setup PS1, testing $- to
193 determine if shell is interactive. The new system-wide bashrc is
194 installed by bash-2.05b-r10
195
196 19 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
197
198 Fix bug 38743: strip leading and trailing spaces from variable
199 values in genenviron.awk. Thanks to Marius Mauch for the patch.
200
201 09 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
202
203 Fix bug 55576: swap words "start" and "stop" in runscript.sh error
204 message
205
206* rc-scripts 1.5.1 (28 Jun 2004)
207
208 28 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
209
210 Fix dhcp in iface_start_ifconfig: It was re-using the variable
211 ${i} which would result in the following error:
212 /sbin/runscript.sh: line 441: ((: 16.141.88.153: syntax error
213 in expression (error token is ".141.88.153")
214
215 Use vlan_IFACE instead of iface_IFACE_vlans in net.eth0 for more
216 consistent vlan configuration. Thanks to robbat2 in bug 55394
217 (not fully resolved)
218
219 Add example for checking if root filesystem is NFS-mounted via
220 predown function in conf.d/net for bug 53104. This might be
221 better integrated at some point into net.eth0
222
223* rc-scripts 1.5.0 (26 Jun 2004)
224
225 26 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
226
227 Fix bug 47659: support iproute2-style configuration. Thanks to
228 Dean Bailey for some fantastic patches, including documentation
229 for conf.d/net. This is a pretty huge re-write of net.eth0
230
231 Fix bug 34607: provide examples for in conf.d/net for preup,
232 postup, predown, postdown functions. Also pay attention to return
233 value from predown function (previously ignored)
234
235 15 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
236
237 Fix bug 25975: support adsl in net.eth0. Thanks to Patrick McLean
238 for the initial pass at the code.
239
240 Fix bug 34140: add --servicelist option to rc-status. Thanks to
241 Eldad Zack for the patch.
242
243 Fix bug 37418: fix order of LVM and RAID in checkfs. Thanks to
244 Raimondo Giammanco for the patch.
245
246* rc-scripts 1.4.16 (06 Jun 2004)
247
248 06 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
249
250 Only call generate-modprobe.conf with --assume-kernel if
251 modules-update was called with --assume-kernel. This means that
252 only catalyst has the dependency on module-init-tools, not
253 everybody with the newer baselayout
254
255* rc-scripts 1.4.15 (21 May 2004)
256
257 21 May 2004; Aron Grifis <agriffis@gentoo.org>:
258
259 Fix bug 51570: typo on line 161 of /sbin/livecd-functions.sh
260
261 Fix bug 51626: wrong variable declaration at top of
262 get_bootparam() in /sbin/functions.sh
263
264* rc-scripts 1.4.14 (17 May 2004)
265
266 17 May 2004; Aron Griffis <agriffis@gentoo.org>:
267
268 Bump version to 1.4.14 to push out gmsoft's fix for hppa console
269 on ttyB0
270
271* rc-scripts 1.4.13 (15 May 2004)
272
273 15 May 2004; Aron Griffis <agriffis@gentoo.org>:
274
275 Bump version to 1.4.13 to push out Gustavo's livecd serial console
276 fixes for sparc and hppa.
277
278* rc-scripts 1.4.12 (07 May 2004)
279
280 10 May 2004; Aron Griffis <agriffis@gentoo.org>:
281
282 Bump version to 1.4.12 to release these critical bug fixes
283
284 Fix bug 50434: The new version of start-stop-daemon changes
285 directory to / by default unless --chdir is specified. Revert
286 this behavior to maintain working directory. This fixes openvpn
287 startup (probably among other things). Thanks to Sven Wegener for
288 the patch.
289
290 Fix bug 50448: Four days ago I changed bash loops to use the wrong
291 conditional syntax in net.eth0. Thanks to Sven Wegener for
292 pointing out the problem and providing a patch.
293
294* rc-scripts 1.4.11 (07 May 2004)
295
296 07 May 2004; Aron Griffis <agriffis@gentoo.org>:
297
298 Fix bug 20597: Skip RCS files when updating modules
299
300 Fix bug 49926: Add a --assume-kernel flag to modules-update. This
301 requires a companion patch in module-init-tools-3.0-r2 to handle
302 the same flag in generate-modprobe.conf; this dependency won't be
303 handled in the baselayout ebuild since it only affects livecd
304 building.
305
306 06 May 2004; Aron Griffis <agriffis@gentoo.org>:
307
308 In net.eth0, fix many instances of loops like "for ((i = 0; i <
309 100; i = i + 1))". The problem here is that the middle comparison
310 is being interpreted as a bash conditional, which means that it's
311 doing string comparison by default. It needs to be "i -lt 100"
312
313 Fix bug 34827: net.eth0 breaks when localized because the ifconfig
314 output changes. Wrap ifconfig in a function that overrides
315 LC_ALL=C
316
317 Fix bug 48305: Provide a new network configuration variable
318 ifconfig_fallback_eth0 which allows one to specify a fallback
319 configuration in case DHCP fails.
320
321 Fix bug 50246: Give root an invalid password ("*" in /etc/shadow)
322 in the default baselayout. This prevents the first reboot after
323 installation from having a blank password.
324
325 05 May 2004; Aron Griffis <agriffis@gentoo.org>:
326
327 Fix bug 48595: Make sure $(id -u) is zero (root user) when running
328 init scripts to avoid a lot of error messages.
329
330 Replace many lines of awk with two lines of grep in
331 init.d/localmount
332
333 Fix bug 44316: Use 0644 instead of 0640 for resolv.conf in net.ppp0
334
335 03 May 2004; Aron Griffis <agriffis@gentoo.org>:
336
337 Update to version 1.10.20 of Debian's start-stop-daemon (contained
338 in dpkg at http://packages.debian.org/testing/base/dpkg). This
339 fixes bug 22686 (start-stop-daemon in baselayout doesn't allow
340 altered nicelevel).
341
342* rc-scripts 1.4.10 (25 Apr 2004)
343
344 25 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
345
346 Fix typos in sbin/rc: "try try mount" and "mount ... & >/dev/null"
347 Also removed the errstr double-checking since the need for that is
348 alleviated by these typo fixes.
349
350 23 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
351
352 Fix bug 48629 (/sbin/rc fixups for udev) with patch from GregKH
353
354 Fix bug 40987 (gentoo should be able to boot with an empty /dev)
355 with patch from Spanky. The patch avoids redirection to /dev/null
356 when it doesn't exist; this was breaking /sbin/rc.
357
358* rc-scripts 1.4.9 (15 Apr 2004)
359
360 15 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
361
362 Fix bug 47111 (severe depcache problems) with tons of help from
363 dswhite42 and the rest of the crew in that bug. Thanks guys!
364
365* rc-scripts 1.4.8 (14 Apr 2004)
366
367 14 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
368
369 Fix bug 47623 (error removing inet6 addresses) with patch provided
370 by Vlad Yasevich.
371
372* rc-scripts 1.4.7 (12 Apr 2004)
373
374 12 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
375
376 Fix bug 47218 (net.eth0 broken for vlans) with patch provided by
377 Andy Dustman. Fix bug 47250 (depscan.sh fails to create
378 /var/lib/init.d/* directories) with patch from Terje Bergström.
379
380* rc-scripts 1.4.6 (08 Apr 2004)
381
382 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
383
384 Update patch from Gustavoz; -ln /bin/bash should have been -nl /bin/bash
385
386* rc-scripts 1.4.5 (08 Apr 2004)
387
388 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
389
390 Patch init.d/checkroot to list / (root) only once in mtab; see bug 38360.
391 Patch from Gustavoz to livecd-functions.sh to run bash instead of login on
392 serial consoles, necessary due to scrambled root passwords.
393
394* rc-scripts 1.4.4 (07 Apr 2004)
395
396 07 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
397
398 Patch from Gustavoz for Sparc console: Fetch LIVECD_CONSOLE from dmesg
399 output. Also support 4800 baud correctly.
400
401 16 Mar 2004; Aron Griffis <agriffis@gentoo.org>:
402
403 The changes in this commit pertain primarily to
404 http://bugs.gentoo.org/show_bug.cgi?id=19695
405 http://bugs.gentoo.org/show_bug.cgi?id=35736
406
407 Specify routes as an array per interface, for example:
408 routes_eth0=(
409 "-net 10.1.0.0 netmask 255.255.0.0 gw 10.0.0.5"
410 "-net 10.2.0.0 netmask 255.255.0.0 gw 10.0.0.6"
411 "-host 10.3.0.1 dev eth0"
412 )
413
414 You can optionally use the gateway variable or just put the default route
415 in the routes variable. The following two are REDUNDANT:
416
417 routes_eth0=( "default gw 10.0.0.5" )
418 gateway="eth0/10.0.0.5"
419
420 Old configuration variables in /etc/conf.d/net are fully supported and
421 used transparently if ifconfig_eth0 is missing. In other words, this new
422 script is fully backward-compatible. However you can get rid of
423 iface_eth0, alias_eth0, broadcast_eth0 and netmask_eth0 if you want by
424 using the new syntax:
425
426 ifconfig_eth0=(
427 "10.0.0.6 broadcast 10.0.255.255 netmask 255.255.0.0"
428 "192.168.1.1 netmask 255.255.255.0"
429 "123.456.789.1"
430 )
431
432 Full backward compatibility so no danger to screwing up users relying on
433 existing /etc/conf.d/net setup
434
435 NET_DEBUG can be set in the environment for copious debugging output
436
437 Deprecate [ ] in favor of [[ ]] which has fewer quoting issues and
438 better functionality (and is even slightly faster)
439
440 Properly localize all variables, including variables returned by
441 setup_vars
442
443 Allow full options for every ifconfig command, both base address and
444 aliases via ifconfig_eth0, replacing the convoluted and less-functional
445 iface_eth0, alias_eth0, broadcast_eth0, netmask_eth0
446
447 Provide full support for static routes via routes_eth0
448
449 Fix potential quoting problems in setup_vars by using better eval syntax
450 instead of eval echo
451
452 Display IP addresses while configuring, both DHCP-retrieved and
453 statically set addresses
454
455 Collapse redundant caching of $? since eend returns $? again
456
457 Report when keeping kernel configuration for an interface along with IP
458 address gleaned
459
460 Don't reset the default gateway if it is already set correctly
461
462 Don't bind default gateway to particular interface when /sbin/route is
463 called so that it can survive if there is more than one interface on the
464 required subnet. (Old behavior can be obtained by setting
465 routes_eth0="default gw 1.2.3.4 dev eth0" if you really want it)
466
467 Don't bomb if default gateway can't be set since that doesn't
468 necessarily mean that the interface configuration is invalid.
469 (Old behavior was completely broken, but commented section
470 demonstrates how to do it right if necessary)
471
472 iface_stop no longer relies on configuration in /etc/conf.d/net AT ALL.
473 This is very good because it means you can put new configuration in
474 /etc/conf.d/net, then restart the interface and the old configuration will
475 be properly shut down.
476
477 iface_stop reports when it is releasing the DHCP lease
478
479* rc-scripts 1.4.3.13p1 (26 Feb 2004)
480
481 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
482
483 Remove /etc/DIR_COLORS, as coreutils provides it now.
484
485 Add RC_DEVICE_TARBALL to /etc/conf.d/rc to control use of device tarball.
486 Also modified /sbin/rc and /etc/init.d/halt.sh for this.
487
488 Start udevd if present.
489
490 Small fix to sbin/rc-services.sh related to mtime checking and 'net'
491 virtual service - it had no mtime generated, so check_mtime() failed
492 for it ...
493
494 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
495
496 Update to enable checking of mtimes on rc-scripts, and auto running
497 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO
498 is not set instead of just erroring.
499
500 19 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
501
502 Fix irda type-o in /sbin/MAKEDEV, thanks to Tobias Sager <moixa@gmx.ch>.
503
504 Fix type-o in /etc/initrc, bug #41666 (Tom Vergote <bugzilla@tomvergote.be>).
4 505
5 15 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 506 15 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
6 507
7 Add RC_TTY_NUMBER to /etc/conf.d/rc to configure how many tty devices 508 Add RC_TTY_NUMBER to /etc/conf.d/rc to configure how many tty devices
8 are used in scripts such as consolefonts, numlock, etc. This should 509 are used in scripts such as consolefonts, numlock, etc. This should
9 close bug #39863. 510 close bug #39863.
511
512 Fix type-o in /etc/init.d/consolefont, bug #40938, thanks to patch from
513 Cory Tusar <ctusar@adelphia.net>.
10 514
11 09 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 515 09 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
12 516
13 Add SELinux modifications to /sbin/runscript. This allows runscript to 517 Add SELinux modifications to /sbin/runscript. This allows runscript to
14 make sure it is running in the right domain. Patch done by 518 make sure it is running in the right domain. Patch done by
1376 1880
1377 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified 1881 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified
1378 /etc/env.d/00basic for this. 1882 /etc/env.d/00basic for this.
1379 1883
1380 Add some new daemon stop and pid detection stuff to /sbin/functions.sh. 1884 Add some new daemon stop and pid detection stuff to /sbin/functions.sh.
1381 Nothing official, but I spent enouth time on it not to want to loose it :) 1885 Nothing official, but I spent enough time on it not to want to loose it :)
1382 1886
1383 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs 1887 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs
1384 to give output to stderr. This was caused by a call to "stty", which when 1888 to give output to stderr. This was caused by a call to "stty", which when
1385 run without a attatched terminal, have this effect. Basically just pipe 1889 run without a attatched terminal, have this effect. Basically just pipe
1386 stderr to /dev/null. 1890 stderr to /dev/null.

Legend:
Removed from v.1.319  
changed lines
  Added in v.1.410

  ViewVC Help
Powered by ViewVC 1.1.20