/[gentoo-src]/rc-scripts/ChangeLog
Gentoo

Diff of /rc-scripts/ChangeLog

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.319 Revision 1.538
1# ChangeLog for Gentoo Linux System Intialization ("rc") scripts 1# ChangeLog for Gentoo System Intialization ("rc") scripts
2# Copyright 2002-2004 Gentoo Technologies, Inc.; Distributed under the GPL 2# Copyright 2002-2004 Gentoo Foundation; Distributed under the GPLv2
3# Written by Daniel Robbins (drobbins@gentoo.org) 3
4 07 Dec 2004; Roy Marples <uberlord@gentoo.org>:
5
6 essidnet - fixed setting up search domains
7 ifconfig now reads the old gateway variable correctly - fixes #73607
8 iwconfig now supports backgrounding
9 ifconfig and iproute2 now support function interface_set_mac_address
10 macchanger no longer depends on macchanger if configuring a specific
11 mac address
12
13 06 Dec 2004; Roy Marples <uberlord@gentoo.org>:
14
15 macchanger defaults to setting the interface down, and then trying
16 with it up - fixes #71929
17 macchanger converts mac_${IFACE} to lowercase - fixes #73549
18 iproute2 now configures the interface up everytime we add an address
19 removed "need interface" from all modules depends as net.lo requires
20 interface anyway
21 removed hardcoded ath0 in wpa_supplicant
22
23 added rc-script statuses "starting", "stopping" and "inactive"
24 dhcpcd, udhcpc and dhclient now support backgrounding - fixes #52975
25
26 05 Dec 2004; Roy Marples <uberlord@gentoo.org>:
27
28 dhclient now kill it's process if it failed to get a lease on startup
29 all dhclient responses are now handled correctly
30
31 04 Dec 2004; Roy Marples <uberlord@gentoo.org>:
32
33 fixed dhclient-ifconfig to look for dhclient-udhcpc-wrapper in the correct
34 place and changed hardcoded eth1 to ${interface} in udhcpc-ifconfig.
35 Fixes #73327 - thanks to Benoit Boissinot
36
37 essidnet gets the essid itself instead of relying on ${ESSID}
38 wpa_supplicant module added
39 config-system now creates files as .tmp instead of .new and loads
40 the wpa_supplicant module if needed
41 ifconfig now addes aliases to devices other than eth0
42 dhcpcd, dhclient, pump and udhcpc now expose the dhcp_${IFACE} variable
43 instead of the old peer_dns_${IFACE}, peer_ntp_${IFACE}, peer_nis_${IFACE}
44 ones
45
46 removed modules use dependancy in net.lo and added installed
47 - this allows use to provide "virtual" modules which are only "installed"
48 when other depended modules are installed
49
50* rc-scripts 1.6.7 (03 Dec 2004)
51
52 03 Dec 2004; Mike Frysinger <vapier@gentoo.org>:
53
54 Simply filesystem unmounting in halt.sh. Based upon work by Georg Sauthoff
55 #68697. Also clean up the filesystem remounting readonly. As a last
56 resort to filesystems which won't remount readonly, we try to unmount them
57 with the force/readonly options. Idea from #70349.
58
59 03 Dec 2004; Roy Marples <uberlord@gentoo.org>:
60
61 Fixed config-system for only changing hostname when needed
62 udhcpc and dhclient now restore saved configs when stopping and work
63 with non-infinite leases
64 Moved generic dhcp options into a space seperated string
65 udhcpc now caches it's IP address and requests it the next time it starts
66 if the address is not released
67 udhcpc and dhclient no longer flush interfaces if we don't need too
68 ipppd module now looks for ipppd in /usr/sbin - fixes #73067
69
70 02 Dec 2004; Mike Frysinger <vapier@gentoo.org>:
71
72 Merge time checking function (is_older_than) to help simplify config
73 file update checking. Used for now in env-update.sh #71285. Function
74 written by Paul Pacheco #55329.
75
76 02 Dec 2004; Roy Marples <uberlord@gentoo.org>:
77
78 Added option dhcp_release to specify if we release the DHCP lease or not
79 defaults to no
80 Changed variables peer_* to dhcp_*
81 dhclient and udhcpc now specify a pidfile
82 Fixed iwconfig report if iwgetid does not support --channel
83
84 01 Dec 2004; Mike Frysinger <vapier@gentoo.org>:
85
86 Refix and clean up the netmount script to kill processes #64034.
87
88 01 Dec 2004; Roy Marples <uberlord@gentoo.org>:
89
90 Documentation fixes regarding iwconfig and linux-wlan-ng
91 Fixed bonding deps per bug #71419
92
93 30 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
94
95 Fix the UML/coLinux check in init.d/clock #72937.
96
97 Allow the user to override the default mount options via /etc/fstab
98 for all the mounts. Added a 'is_in_fstab' function to see if the
99 user has defined the mount, and if not, fall back to the hardcoded
100 stuff from before. This also lets us get rid of $RC_DEVICE_FS #70044.
101
102 26 Nov 2004; Roy Marples <uberlord@gentoo.org>:
103
104 Fixed up address detection in apipa
105 net.lo now checks for duplicate static IPv4 addresses before assigning
106 iwconfig now supports preassociate and postassociate user hooks
107 net.example - changed $1 to ${IFACE} in examples
108 clarified lack of linux-wlan-ng support
109
110 24 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
111
112 Allow users to specify charset option to dumpkeys when using unicode
113 in conf.d/keymaps #72225. Also move all the init.d/keymap specific
114 options out of rc.conf and into conf.d/keymaps and add some config
115 checks to init.d/keymaps like the clock/hostname init.d scripts.
116
117 Make sure /etc/rc.conf overrides conf.d files when starting up
118 critical services. Should help out with transition from rc.conf.
119
120 24 Nov 2004; Roy Marples <uberlord@gentoo.org>:
121
122 Ensure all net-scripts modules depend on interface_variable function
123 where applicable
124 Fixed adsl stopping - #68934. Thanks to Andreas Kauer
125
126 23 Nov 2004; Roy Marples <uberlord@gentoo.org>:
127
128 iproute2 does not need to create dummy interfaces for aliases
129 unlike ifconfig so we no longer do this
130 We now bring down all aliases and addresses properly
131 Split off some functions from net.lo into helpers.d/functions
132 so that our DHCP helper scripts can use them too :)
133 Deprecated interface specific setup in favour of a generic config
134 macchanger brings interface up now - fixes #71929
135 DHCP over VLAN now works - fixes #71860
136 Disabled modified function checking as it's far too expensive on CPU
137 and still isn't 100% reliable
138 When specifing a module that isn't emerged, you now get an error
139 telling you what to emerge
140 Removed -p option from the diff call used for function removal
141 Removed rp_filter setting - fixes first part of bug #71971
142 Added sysctl.conf settings relating to rp_filter to sysctl.conf
143 - fixes last part of bug #71971
144 Fixed pump exporing ntp servers
145 implemented MODULES_DIR so we can change directory we load from on the fly
146 fixed variables for vlans in most modules
147
148 19 Nov 2004; Aron Grffis <agriffis@gentoo.org>:
149
150 Remove crap "ll" and "d" aliases from skel .bashrc
151
152 19 Nov 2004; Roy Marples <uberlord@gentoo.org>:
153
154 tests for hostname (none) when sending hostname via dhcpcd, udhpc or pump
155 udhcpc now does correct signal handling so we can release leases and
156 terminate cleanly
157 Improved pump process detection
158 Rewrote udhcpc helper scripts around udhcpc and wrapped dhclient to udhcpc
159 scripts. This makes things much saner as udhcpc is much saner - also fixed
160 essidnet and ipv6 local link for them.
161 removed iproute2 udhcpc reliance on the "bc" command
162
163 17 Nov 2004; Roy Marples <uberlord@gentoo.org>:
164
165 Fixed invalid variable handling in bonding and vlan - bug #71419
166 apipa now brings the interface up before testing if address exists
167 Updated bonding documentation - bug #71419
168 Fixed iproute2 adding addresses for vlans - bug #71419
169 ifconfig handle inet6 routing automatically - bug #33310
170 ifconfig - fixed old gateway + gateway in routes conflict
171 iproute2 cleaned up some functions
172
173 16 Nov 2004; Roy Marples <uberlord@gentoo.org>:
174
175 We no longer default a fallback to APIPA when no config is given
176 net.example fleshed out a bit more for dhcpcd - fixes #60845
177 Improved forced module handling a touch
178 modules_sort and modules_check_user in net.lo buffer _provides,
179 _before and _after in arrays to avoid shelling out
180
181 15 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
182
183 Add a check to clock init.d to make sure users dont try to set
184 config their clock in rc.conf anymore.
185
186 Redo hostname/domainname scripts to use files in /etc/conf.d/
187 instead of creating files in /etc/. Allows for controlling things
188 like the behavior of setting the 'domain' in resolv.conf since users
189 may not always understand exactly what's going on.
190
191 Stop referring to conf.d/basic as a global rc config option. That
192 file hasn't been used in a long time and has since been replaced
193 with env.d/00basic. Updated sbin/runscript.sh, etc/profile,
194 sbin/rc-help.sh, and src/awk/cachedepends.awk.
195
196 Run `find | xargs` instead of `find -exec`. Much better performance
197 this way, and busybox friendly #59732.
198
199 15 Nov 2004; Roy Marples <uberlord@gentoo.org>:
200
201 Split modules_load into smaller more managable functions in net.lo
202 Added modules_force option to net.lo with a big phat warning in
203 net.example about it potentially breaking networking
204 Added searchdomains_ESSID option to essidnet
205 Stopped the domain setting from putting the same entry in search
206 in config-system and essidnet
207 Removed second warning in net.lo when configuration not set
208 Documented APIPA module in net.example
209 Added kernel checking for vlan - fixes #70829
210 Added kernel checking for bonding, bridging and tuntap
211 Added iproute2 support to the APIPA module
212
213 13 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
214
215 Update the svcdir mounting #69595. Instead of mounting in /mnt
216 and then bind mounting to $svcdir, we mount the ramdisk on $svcidr.
217
218 12 Nov 2004; Roy Marples <uberlord@gentoo.org>:
219
220 Added arping duplicate address detection to net.lo
221 Created Automatic Private IP Addressing (APIPA) module
222
223 Added dependancy checking to ipppd
224 Bonding is now started pre instead of post
225 Fixed iface variable in dhcp modules for vlans
226 Changed get_device to interface_device
227 Changed get_type to interface_type
228 Added vlan configuration options and documented them in net.example
229 Fixed bridge configuration handling
230 Removed _get_vlans from iproute2 and ifconfig as vlan now does it itself
231
232 11 Nov 2004; Roy Marples <uberlord@gentoo.org>:
233
234 Fixed category of rp-pppoe to net-dialup error when requesting ADSL
235 Improved inet6 address deletion and detection in iproute2
236 Improved gateway logic in ifconfig
237 Changed all wireless reporting functions to use iwgetid instead of
238 parsing iwconfig output except for essid
239
240* rc-scripts 1.6.6 (08 Nov 2004)
241
242 08 Nov 2004; Roy Marples <uberlord@gentoo.org>:
243
244 Added options to configure bridge
245 Added bridge configuration example to net.example
246 Added missing required function interface_exists to iptunnel check_depends
247
248 07 Nov 2004; Aron Griffis <agriffis@gentoo.org>:
249
250 Fix shell scripting errors that would result in
251 /sbin/functions.sh: line 166: [: too many arguments.
252
253 05 Nov 2004; Roy Marples <uberlord@gentoo.org>:
254
255 net-scripts/net.modules.d/bridge
256 - fixed destroying a bridge if no ports were added
257 - starts interfaces if they don't exist - fixed bug #65153
258
259 net-scrips/net.modules.d/bonding
260 - starts interfaces if they don't exist
261
262 net-scripts/init.d/net.lo
263 - added net_start() function to start depandant ifaces
264 so that bridge br0 can active tun0 which net.tun0 has to create
265 - added use dependany on wlan incase we're using linux-wlan-ng drivers
266 fixes bug #64978
267 - moved start() to run_start() and stop() to run_stop()
268 created run() and new start()/stop() functions
269 this is so that we have one single entry point to localise variables
270 and to remove any added functions loaded by our modules
271 - removed redundant interface_exists() as it's provided by
272 ifconfig and/or iproute2
273
274 net-scripts/net.modules.d/ifconfig and iproute2
275 - added ifconfig_tunnel and iproute2_tunnel functions
276
277 addred gre/ipip tunnel support via the the tunnel module
278 - fixes bug #50765
279
280 04 Nov 2004; Roy Marples <uberlord@gentoo.org>:
281
282 net-scripts/net.modules.d/pump
283 - fixed setting ntp servers
284
285 net-scripts/net.modules.d/dhcpcd
286 - fixed stopping function
287
288 net-scripts/net.modules.d/bonding
289 - fixed module to actually work with the interface
290
291 net-scripts/init.d/net.lo
292 - we remove all added functions when restarting an interface
293 this relies on the diff command being available
294
295 added isdn support via the new ipppd module - fixes bug #69035
296
297 net-scripts/conf.d/net.example
298 - added sample isdn setup
299
300 net-scripts/conf.d/wireless.example
301 - added better descriptions to the _sleep variables
302
303 Fixed boolean logic error when testing is_net_up in /sbin/runscript.sh
304 - fixed bug #70022
305
306 net.lo - added get_type function to return the type of the interface
307 - eth, ippp, etc
308
309 ipppd, tuntap
310 - start() moved to pre_start() and we now test by type
311 this means you no longer need ifconfig_ippp0=( "isdn" "dhcp" )
312 as ippp0 is always an isdn device
313
314 bridge - fixed stop function and moved start() to pre_start()
315 and automatically start if the variable bridge_${iface} exists
316
317 net.example - fixed up documentation for changed behaviour above
318
319 03 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
320
321 When launching critical services in /sbin/rc, make sure we source
322 the conf.d file (if it exists). Resolves #69956.
323
324 03 Nov 2004; Roy Marples <uberlord@gentoo.org>:
325
326 net-scripts/init.d/net.lo
327 - fixed !module when it's not installed
328 - we can now specify null inet addresses in the config
329 this allows a pure inet6 setup
330 - shutdown lo the same way we bring it up
331
332 net-scripts/net.modules.d/ifconfig
333 - changed IPv6 to inet6 in output of adding inet6 addresses
334 - just output inet6 address removed, not eth0 del foo
335
336 net-scripts/net.modules.d/iproute2
337 - fix deletion of non-link addresses - fixes bug #65417 (again)
338 - handle inet6 addresses like ifconfig - fixes more bug #65417
339
340 net-scripts/conf.d/net.example
341 - noted that inet6 addresses do not create aliases
342 - added examples of assigning inet6 addresses
343
344 net-scripts/net.modules.d/iwconfig
345 - improve error message when card does not support scanning
346
347 net-scripts/conf.d/wireless.example
348 - fixed comment regarding preferred_aps not working with cards that don't
349 support scanning
350
351 02 Nov 2004; Roy Marples <uberlord@gentoo.org>:
352
353 net-scripts/conf.d/net.example
354 - added bridging and tuntap examples
355
356 net-scripts/init.d/net.lo
357 - modprobe ${IFACE} when ${IFACE} does not exist
358
359 net-scripts/net.modules.d/ifconfig
360 - fixed interface existance check
361
362 net-scripts/net.modules.d
363 ifconfig & iproute2
364 - added boolean to interface_exists to report if it exists or not
365 - added checks to see if the interface exists or not when starting
366
367 dhcpcd
368 - removed debug line
369
370 bonding, dhclient, dhcpcd, essidnet, macchanger, pump, udhcpc
371 - added checks to see if the interface exists or not when starting
372
373 tuntap
374 - added checks to see if the interface exists or not when stopping
375
376 01 Nov 2004; Mike Frysinger <vapier@gentoo.org>:
377
378 Dump the error message that hwclock returns since it tends to be
379 quite useful. Modified init.d/clock.
380
381 Fix error in functions.sh [ -z "$@" ] -> [[ -z "$@" ]] #69789.
382
383 Don't create /dev/sndstat link anymore in populate_udev per #69635.
384
385 01 Nov 2004; Roy Marples <uberlord@gentoo.org>:
386
387 net-scripts/init.d/net.lo:
388 - modules specified by interface config now error if they are not loaded
389 - moved interface check to after preup incase user preup loads drivers
390 - modules can be explicitly not used by prefixing them with a !
391 however, they are still available to other modules
392 fixes bugs #68908, #69027
393 - remove check to see if interface exists
394 - modules may setup new interfaces and still require config
395 so we have a new label counter in iface_start
396 - removed the check to see if a class wrapping already exists
397 this fixes the bug where ifconfig and iproute2 are installed, but
398 ifconfig is asked for and the interface is restarted.
399 - added check to see if the configured module is loaded
400 and installed or not in iface_start
401 - add dependancy on isdn4linux - fixes bug #69035
402 - interface_exists moved to iproute and ifconfig
403
404 net-scripts/net.modules.d
405 - Split wireless module into iwconfig and essidnet modules
406 - Added tuntap and bridge modules, fixes bug #55394, #30688
407
408 net-scripts/init.d/iwconfig:
409 - wep mode is now reported
410 - removed post_stop function so we keep existing config
411 - added pre_stop to set the ESSID variable
412 - changed to veinfo/vewarn where appropriate
413 - check if interface exists otherwise abort gracefully
414 - no longer deletes addresses as we now avoid
415 ipv6 local addresses in detecting if interface has an addresses or not
416
417 net-scripts/init.d/ifconfig:
418 - added flag enable/disable function
419 - scope:link inet6 addresses are ignored when testing is_up and
420 del_addresses - fixes bug #65417
421
422 net-scripts/init.d/iproute2:
423 - added flag enable/disable function
424 - scope:link inet6 addresses are ignored when testing is_up and
425 del_addresses - fixes bug #65417
426
427 net-scripts/init.d/macchanger:
428 - fixed detecting whether the change worked or not, fixes bug #68893
429
430 net-scripts/init.d/vlan:
431 - fixed old config problem
432
433 31 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
434
435 Do not delete depscan and envupdate caches on reboot, as this should
436 improve bootup times - works nicely with the '-u' parameters of both.
437 Also move the '-u' parameter test of depscan.sh after the directory
438 exist test, else ${svcdir}/started/, etc do not exist. Modified both
439 /sbin/rc and /sbin/depscan.sh for this.
440
441 Move things around in /sbin/functions.sh to have all functions above.
442
443 Add the 'lo' option to RC_NET_STRICT_CHECKING to resolve bug #29225.
444
445 28 Oct 2004; Martin Schlemmer <azarah@gentoo.org>:
446
447 Only add files not managed by udev to device tarball, bug #57110.
448
449 28 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
450
451 Revert pam_console_apply udev check in bootmisc/halt.sh since
452 the bug is with pam_console_apply and not udev/pam.
453
454 Use ${EUID} instead of $(id -u) to help out BSD in runscript.sh.
455
456 Allow users to select ramfs instead of default tmpfs for mounting
457 on /dev with udev #69091.
458
459 Add issue.devfix which would be auto copied to /etc/issue if
460 /sbin/rc detects the user is missing /dev/null or /dev/console.
461 Includes a simple explanation/fix for what's wrong.
462
463 Make sure the clock init script runs after checkroot/modules/localmount
464 so that timestamps are synchronized asap #68133 / #70008.
465
466 Accept '-nc' as a short option to '--nocolor' #64736.
467
468 26 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
469
470 Don't use -A with fsck to respect the fs_passno since it'll try
471 to fsck all filesystems, not just the ones specified. Instead,
472 awk /etc/fstab to review the passno field in checkroot #68822.
473
474 Add support for 'gentoo=forcefsck' boot option in checkroot.
475
476 Make sure we run devfsd in /sbin/rc even when /dev has been
477 automounted by the kernel #68795.
478
479 Don't generate the device tarball in halt.sh with livecds #68469.
480
481 25 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
482
483 net-scripts/net.modules.d/ifconfig:
484 - Simplify ifconfig_is_up()
485 - Fix ifconfig_get_aliases_rev() to actually work... you can't
486 specify an interface name to ifconfig if you want to see the
487 aliases.
488 - Workaround a couple ifconfig bugs dealing with aliases
489 - Correct a return status in ifconfig_interface_del_addresses()
490 - ifconfig_iface_stop() is bool, not void; fix the comments
491
492 net-scripts/net.modules.d/iproute2:
493 - iproute2_iface_stop() is bool, not void. Fix the code so it
494 returns meaningful values
495
496 net-scripts/init.d/net.lo:
497 - Fix preferred (ifconfig/dhcpcd) module loading so it doesn't
498 barf when a preferred module is either (1) missing from
499 net.modules.d or (2) not available due to missing dependencies
500 - When loading all modules in order to stop an interface, only use
501 the first available to satisfy each class wrapper
502
503 24 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
504
505 Include livecd patch that was applied to baselayout-1.9.4-r6
506 to use agetty instead of mingetty
507
508 24 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
509
510 Mount tmpfs instead of ramfs on /dev when using udev systems.
511 The problem with ramfs is that it has no size limitations so
512 one could easily take down their machine by accident #68653.
513
514* rc-scripts 1.6.3 (23 Oct 2004)
515
516 22 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
517
518 Add support for user_eth0 in the adsl module and in net.example.
519 This means that most users won't need to edit pppoe.conf at all
520
521 21 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
522
523 Remove old etc/conf.d/net and try to clarify instructions in
524 net-scripts/conf.d/net.example. Add example for ADSL
525
526 21 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
527
528 Merge all of the UML checks into one function, is_uml_sys(),
529 which is now in functions.sh.
530
531 18 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
532
533 Add v-e-commands (veinfo, vbegin, etc) to sbin/functions.sh that
534 depend on RC_VERBOSE which defaults to no. Add --verbose to args
535 understood by runscript.sh.
536
537 In net.lo, use veinfo and friends when loading modules since this
538 information is confusing to users.
539
540 In net.lo, always load global "modules" setting in following
541 "modules_iface" since this is a little easier for users to
542 understand.
543
544 In net.lo, use eindent for output of pre/post scripts
545
546 18 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
547
548 Add shfs to our list of net filesystems #61452. Also add afs/nfs4.
549
550 Add a '-u' parameter to depscan.sh to allow for updates only when
551 the config files have changed. With /sbin/rc using this, we speed
552 up bootup by only regenerating the cache when need be #67976. Also
553 add a '-u' parameter to env-update.sh for same reasons.
554
555 Don't run depscan.sh in rc-update anymore since the cache files don't
556 depend on runlevels (which is all that rc-update modifies).
557
558 Add unicode support to keymaps/consolefont #32111 and UML support #29707.
559
560 Add checks to many filesystem operations in the eventuality that the
561 filesystems are mounted read only.
562
563 16 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
564
565 Update the default fstab /dev/shm mount to include the nodev, nosuid,
566 and noexec mount flags. No reason for the filesystem to have those.
567
568 Cleaned up the clock init script. Moved the clock options out of
569 rc.conf and into its own conf.d/clock file. Added support for the
570 weird Alpha consoles SRM/ARC since they need special config options.
571 Also made the syncing of system clock to hardware clock at shutdown
572 optional (with the default being off) #15834. Don't try to set the
573 clock if running inside a coLinux environment #52870.
574
575 Update default PATH ordering to try to follow default behavior in
576 other distro's and because it's logical that /usr/local should
577 override /usr which should override /. Fixes #12531.
578
579 Move devfs stuff out of baselayout and into the devfsd package.
580
581 Don't run /sbin/pam_console_apply -r if using udev on /dev #50315.
582
583 14 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
584
585 Fix rc-status to work with new COLS code.
586
587 14 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
588
589 Allow users to mount ramfs/tmpfs/ramdisk as their svcdir and
590 stop assuming ramfs==ramdisk #64079.
591
592 13 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
593
594 Rework the code for managing /dev to make it more flexible for
595 users. Some don't want to use devfs/udev but rather just create
596 their own nodes. Handles some issues with #44906 / #67276.
597
598 Move the utmp clearing code out of bootmisc and into /sbin/rc.
599 The utmp log must be cleared while in the initial boot level
600 (meaning inside /sbin/rc) because as soon as rc exists, init
601 writes a 'boot' record (`who -b`) which would normally be lost
602 when the bootmisc init.d script is run #61727.
603
604 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
605
606 Cosmetic fixes for starting loopback interface
607
608 SpanKY doesn't like the dots... disable them by default, but you
609 can set RC_DOT_PATTERN=' .' in /etc/conf.d/rc to get them back
610
611* rc-scripts 1.6.2 (13 Oct 2004)
612
613 13 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
614
615 Install net.modules.d to /lib/rcscripts instead of /etc so we
616 don't have to deal with CONFIG_PROTECT
617
618 Fix diff code in modules_load so it can identify which functions
619 have been modified
620
621 Fix fallback mechanism in iface_start so that it works correctly
622 and doesn't report a bogus error message when trying the fallback
623
624 Get rid of need_begin trickery in iface_stop
625
626 Simplify eend processing in dhcp modules
627
628 Implement eindent, eoutdent, esetdent in functions.sh and adjust
629 net-scripts to use them.
630
631 Re-write einfo, ewarn, eerror, ebegin, eend, ewend to use
632 RC_INDENTATION and to work better on serial terminals
633
634 Remove conf.d/net.ppp0 since that is provided by net-dialup/ppp
635
636 12 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
637
638 Fix ipaddr_fallback in net-scripts/conf.d/net.example
639
640 09 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
641
642 Remove init.d/net.eth0 net.lo and net.ppp0. The first two are
643 provided now by net-scripts and net.ppp0 is shipped in
644 net-dialup/ppp
645
646 Create NET_FS_LIST and is_net_fs in functions.sh and use them in
647 checkroot, localmount, netmount, net.example, and net.lo
648
649 09 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
650
651 If the hostname has already been set via the kernel/dhcp, don't
652 force it to 'localhost'. Used in netboot/terminal setups #38172.
653
654 Add domainname to default boot runlevel list #47041.
655
656 08 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
657
658 Make sure that when we try to mount /sys, we do so with -n (tigger).
659
660 Add some examples for nfs to sysctl.conf #66575.
661
662 06 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
663
664 Update to net-scripts 1.0.2 from Roy
665 ------------------------------------
666 - wireless module: replaced preferred_only var with
667 associate_order this makes more sense now as we have changed the
668 possible values
669 - wireless module: added patch from Daniel Zappala we should call
670 wireless_get_essid everywhere now
671 - wireless module: don't declare ESSID local in
672 wireless_configure(). This allows ESSID to be tested in the
673 user defined postup() function
674 - wireless module: test type != "NOT READY!" instead of testing =
675 IEEE. this resolves problems with intel and ra-tech drivers
676 - net.lo start() now errors when the interface does not exist
677 - dhcpcd, dhclient, udhcpc and pump now expose peer_* vars this
678 enables wireless to map them from peer_dns_ESSID
679 - config-system helper now loads wireless module to remap
680 variables from ESSID this allows udhcpc and dhclient to use
681 remapped wireless vars
682 - fixed dhcpcd and pump modules using peer_* vars
683 - wireless aborts after 5 seconds if it cannot report a valid
684 ESSID this fixes a potential infinite loop problem
685 - wireless_setup_iface() renamed to wireless_map_essid_vars() this
686 avoids confusion about what the function actually does
687
688 06 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
689
690 Change the default net.ipv4.conf.default.rp_filter setting to 1
691 in sysctl.conf since it shouldn't be harmful in anyway. Redhat
692 does the same.
693
694 05 Oct 2004; Aron Griffis <agriffis@gentoo.org>:
695
696 Get rid of getcols() in sbin/functions.sh. Use COLUMNS when
697 possible and otherwise clean up the COLS code. Fix the "emerge
698 depend" detection code to use RC_ENDCOL="no"
699
700 05 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
701
702 Changed behavior of the domainname init.d script. It will now
703 override any settings obtained via dhcp/whatever. See #48277.
704
705 Updated bootmisc to dump the output of `dmesg` to /var/log/dmesg.
706 This way users have an 'after-boot' log of their dmesg saved
707 somewhere useful #55421.
708
709 Added the 'eend' back to depscan.sh since the script starts with a
710 call to 'ebegin' #59694.
711
712 Add selinux update from Chris PeBenito for src/runscript.c #64019.
713
714 Add more quoting to rc-help.sh to fix some non-critical errors.
715 Make rc-help.sh respect the value of RC_NOCOLOR. Allow RC_NOCOLOR
716 in functions.sh to be set via the environment.
717
718 Flesh out the default sysctl.conf with comments and more examples
719 since our previous one was pretty sparse #59993.
720
721 Change calls to `uniq` to `sort -u` in checkroot/halt.sh. This way
722 we only require sort in / and not both #36453.
723
724 04 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
725
726 More (I mean a LOT more) services. This takes care of #44458,
727 #52881 #55939 #58997 #66166 #66297. Gleaned many from the IANA
728 list/Fedora/FreeBSD/Debian.
729
730 Change the test for /proc/cmdline from -e to -r. On grsecurity
731 based systems for example, the file may exist, but not be readable
732 by non-root users (patch by Ned Ludd).
733
734 03 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
735
736 Add support for NFSv4 from #25106 to the netmount script. Don't
737 try to fsck / if the root is a remote filesystem (like NFS) #36624.
738
739 Update the fs_passno values in the default fstab to match the
740 settings suggested by the manpage #37314. Make checkroot respect
741 a fs_passno setting of 0 when dealing with / #39212. Change
742 default / filesystem type to ext3 instead of xfs #42670.
743
744 Re-order the arguments to mount to match POSIX requirements #66225.
745
746 Don't pipe swapon in localmount to /dev/null and ignore return
747 codes anymore. A swapon that works shows no output #39834.
748
749 02 Oct 2004; Mike Frysinger <vapier@gentoo.org>:
750
751 Break up the COL/COLOR code properly this time. Not all serial
752 consoles can handle adjusting to the end of the line, so let's not
753 bother running stty at all anymore. This should fix up #32453.
754
755 30 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
756
757 Disable cryptfs by default in the conf.d file. Also cleanup
758 the output generated in localmount/checkfs/halt.sh for dm-crypt.
759 Add an extra check so that cryptfs is only run when the conf.d
760 file exists as well as /bin/cryptsetup.
761
762 29 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
763
764 Let glibc install nscd since different versions of glibc will
765 need to be handled differently. See #43076 by Rui Malheiro.
766
767 29 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
768
769 Prefer ~/.dir_colors over /etc/DIR_COLORS when it exists #64489
770
771 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
772
773 Clear the screen in .bash_logout #32330
774
775* rc-scripts 1.6.1 (27 Sep 2004)
776
777 27 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
778
779 Update dm-crypt to work with multi-line configuration files.
780 Also don't set status in a subshell; it was being lost before.
781
782 23 Sep 2004; Mike Frysinger <vapier@gentoo.org>:
783
784 Rework the logic behind the $COLS code. It should not depend
785 on whether color is enabled. Also add a check for negative
786 values (like when using a serial console).
787
788* rc-scripts 1.6.0 (15 Sep 2004)
789
790 15 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
791
792 Fix bug 64034: simplify netmount script's stop function so that
793 mountpoints containing spaces work correctly
794
795 Update tarball.sh to use net-scripts
796
797 14 Sep 2004; Aron Griffis <agriffis@gentoo.org>:
798
799 Commit dm-crypt enablement patch from Tigger (Rob Holland) in
800 bug 43146
801
802* rc-scripts 1.5.3 (18 Aug 2004)
803
804 18 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
805
806 Fix bug 60719 (request for better error messages from runscript)
807 by allowing errors to show on the screen when they're encountered
808 in wrap_rcscript
809
810 Apply Spock's bootsplash patch from bug 45784. This moves most of
811 the splash functionality out of baselayout.
812
813 13 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
814
815 Don't export PS1. Continuation of bug 26951, comments 60-62.
816
817* rc-scripts 1.5.2 (02 Aug 2004)
818
819 02 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
820
821 Related to bug 38955, don't set INPUTRC. Instead patch bash so
822 that it looks for /etc/inputrc automatically if ~/.inputrc is
823 missing. This is better than using INPUTRC since that will
824 override even after the user creates ~/.inputrc.
825
826 Fix bug 54275: Don't set INFODIR. The correct variable used by
827 texinfo is INFOPATH, which is already set in 00basic. Setting
828 INFODIR is useless, and breaks a NetBSD cross compile from Gentoo
829
830 01 Aug 2004; Aron Griffis <agriffis@gentoo.org>:
831
832 Fix bug 58805: net.eth0 should use bridge so that bridge
833 interfaces are configured prior to net.br0 running
834
835 Fix bug 56856: Get rid of net.rej and integrate missing stuff to
836 conf.d/net
837
838 Apply half of spock's patch in bug 45784: Check for
839 conf.d/bootsplash instead of conf.d/bootsplash.conf
840
841 Fix bug 51351: Quote parsed output of /proc/filesystems to handle
842 octal sequences in mountpoint such as encoded spaces (\040)
843
844 Fix bug 46680: Add cifs support to localmount and netmount.
845 Thanks to Ronald Moesbergen for the patches
846
847 21 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
848
849 Fix bug 26952: Use /etc/bash/bashrc to setup PS1, testing $- to
850 determine if shell is interactive. The new system-wide bashrc is
851 installed by bash-2.05b-r10
852
853 19 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
854
855 Fix bug 38743: strip leading and trailing spaces from variable
856 values in genenviron.awk. Thanks to Marius Mauch for the patch.
857
858 09 Jul 2004; Aron Griffis <agriffis@gentoo.org>:
859
860 Fix bug 55576: swap words "start" and "stop" in runscript.sh error
861 message
862
863* rc-scripts 1.5.1 (28 Jun 2004)
864
865 28 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
866
867 Fix dhcp in iface_start_ifconfig: It was re-using the variable
868 ${i} which would result in the following error:
869 /sbin/runscript.sh: line 441: ((: 16.141.88.153: syntax error
870 in expression (error token is ".141.88.153")
871
872 Use vlan_IFACE instead of iface_IFACE_vlans in net.eth0 for more
873 consistent vlan configuration. Thanks to robbat2 in bug 55394
874 (not fully resolved)
875
876 Add example for checking if root filesystem is NFS-mounted via
877 predown function in conf.d/net for bug 53104. This might be
878 better integrated at some point into net.eth0
879
880* rc-scripts 1.5.0 (26 Jun 2004)
881
882 26 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
883
884 Fix bug 47659: support iproute2-style configuration. Thanks to
885 Dean Bailey for some fantastic patches, including documentation
886 for conf.d/net. This is a pretty huge re-write of net.eth0
887
888 Fix bug 34607: provide examples for in conf.d/net for preup,
889 postup, predown, postdown functions. Also pay attention to return
890 value from predown function (previously ignored)
891
892 15 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
893
894 Fix bug 25975: support adsl in net.eth0. Thanks to Patrick McLean
895 for the initial pass at the code.
896
897 Fix bug 34140: add --servicelist option to rc-status. Thanks to
898 Eldad Zack for the patch.
899
900 Fix bug 37418: fix order of LVM and RAID in checkfs. Thanks to
901 Raimondo Giammanco for the patch.
902
903* rc-scripts 1.4.16 (06 Jun 2004)
904
905 06 Jun 2004; Aron Griffis <agriffis@gentoo.org>:
906
907 Only call generate-modprobe.conf with --assume-kernel if
908 modules-update was called with --assume-kernel. This means that
909 only catalyst has the dependency on module-init-tools, not
910 everybody with the newer baselayout
911
912* rc-scripts 1.4.15 (21 May 2004)
913
914 21 May 2004; Aron Grifis <agriffis@gentoo.org>:
915
916 Fix bug 51570: typo on line 161 of /sbin/livecd-functions.sh
917
918 Fix bug 51626: wrong variable declaration at top of
919 get_bootparam() in /sbin/functions.sh
920
921* rc-scripts 1.4.14 (17 May 2004)
922
923 17 May 2004; Aron Griffis <agriffis@gentoo.org>:
924
925 Bump version to 1.4.14 to push out gmsoft's fix for hppa console
926 on ttyB0
927
928* rc-scripts 1.4.13 (15 May 2004)
929
930 15 May 2004; Aron Griffis <agriffis@gentoo.org>:
931
932 Bump version to 1.4.13 to push out Gustavo's livecd serial console
933 fixes for sparc and hppa.
934
935* rc-scripts 1.4.12 (07 May 2004)
936
937 10 May 2004; Aron Griffis <agriffis@gentoo.org>:
938
939 Bump version to 1.4.12 to release these critical bug fixes
940
941 Fix bug 50434: The new version of start-stop-daemon changes
942 directory to / by default unless --chdir is specified. Revert
943 this behavior to maintain working directory. This fixes openvpn
944 startup (probably among other things). Thanks to Sven Wegener for
945 the patch.
946
947 Fix bug 50448: Four days ago I changed bash loops to use the wrong
948 conditional syntax in net.eth0. Thanks to Sven Wegener for
949 pointing out the problem and providing a patch.
950
951* rc-scripts 1.4.11 (07 May 2004)
952
953 07 May 2004; Aron Griffis <agriffis@gentoo.org>:
954
955 Fix bug 20597: Skip RCS files when updating modules
956
957 Fix bug 49926: Add a --assume-kernel flag to modules-update. This
958 requires a companion patch in module-init-tools-3.0-r2 to handle
959 the same flag in generate-modprobe.conf; this dependency won't be
960 handled in the baselayout ebuild since it only affects livecd
961 building.
962
963 06 May 2004; Aron Griffis <agriffis@gentoo.org>:
964
965 In net.eth0, fix many instances of loops like "for ((i = 0; i <
966 100; i = i + 1))". The problem here is that the middle comparison
967 is being interpreted as a bash conditional, which means that it's
968 doing string comparison by default. It needs to be "i -lt 100"
969
970 Fix bug 34827: net.eth0 breaks when localized because the ifconfig
971 output changes. Wrap ifconfig in a function that overrides
972 LC_ALL=C
973
974 Fix bug 48305: Provide a new network configuration variable
975 ifconfig_fallback_eth0 which allows one to specify a fallback
976 configuration in case DHCP fails.
977
978 Fix bug 50246: Give root an invalid password ("*" in /etc/shadow)
979 in the default baselayout. This prevents the first reboot after
980 installation from having a blank password.
981
982 05 May 2004; Aron Griffis <agriffis@gentoo.org>:
983
984 Fix bug 48595: Make sure $(id -u) is zero (root user) when running
985 init scripts to avoid a lot of error messages.
986
987 Replace many lines of awk with two lines of grep in
988 init.d/localmount
989
990 Fix bug 44316: Use 0644 instead of 0640 for resolv.conf in net.ppp0
991
992 03 May 2004; Aron Griffis <agriffis@gentoo.org>:
993
994 Update to version 1.10.20 of Debian's start-stop-daemon (contained
995 in dpkg at http://packages.debian.org/testing/base/dpkg). This
996 fixes bug 22686 (start-stop-daemon in baselayout doesn't allow
997 altered nicelevel).
998
999* rc-scripts 1.4.10 (25 Apr 2004)
1000
1001 25 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
1002
1003 Fix typos in sbin/rc: "try try mount" and "mount ... & >/dev/null"
1004 Also removed the errstr double-checking since the need for that is
1005 alleviated by these typo fixes.
1006
1007 23 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
1008
1009 Fix bug 48629 (/sbin/rc fixups for udev) with patch from GregKH
1010
1011 Fix bug 40987 (gentoo should be able to boot with an empty /dev)
1012 with patch from Spanky. The patch avoids redirection to /dev/null
1013 when it doesn't exist; this was breaking /sbin/rc.
1014
1015* rc-scripts 1.4.9 (15 Apr 2004)
1016
1017 15 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
1018
1019 Fix bug 47111 (severe depcache problems) with tons of help from
1020 dswhite42 and the rest of the crew in that bug. Thanks guys!
1021
1022* rc-scripts 1.4.8 (14 Apr 2004)
1023
1024 14 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
1025
1026 Fix bug 47623 (error removing inet6 addresses) with patch provided
1027 by Vlad Yasevich.
1028
1029* rc-scripts 1.4.7 (12 Apr 2004)
1030
1031 12 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
1032
1033 Fix bug 47218 (net.eth0 broken for vlans) with patch provided by
1034 Andy Dustman. Fix bug 47250 (depscan.sh fails to create
1035 /var/lib/init.d/* directories) with patch from Terje Bergström.
1036
1037* rc-scripts 1.4.6 (08 Apr 2004)
1038
1039 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
1040
1041 Update patch from Gustavoz; -ln /bin/bash should have been -nl /bin/bash
1042
1043* rc-scripts 1.4.5 (08 Apr 2004)
1044
1045 08 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
1046
1047 Patch init.d/checkroot to list / (root) only once in mtab; see bug 38360.
1048 Patch from Gustavoz to livecd-functions.sh to run bash instead of login on
1049 serial consoles, necessary due to scrambled root passwords.
1050
1051* rc-scripts 1.4.4 (07 Apr 2004)
1052
1053 07 Apr 2004; Aron Griffis <agriffis@gentoo.org>:
1054
1055 Patch from Gustavoz for Sparc console: Fetch LIVECD_CONSOLE from dmesg
1056 output. Also support 4800 baud correctly.
1057
1058 16 Mar 2004; Aron Griffis <agriffis@gentoo.org>:
1059
1060 The changes in this commit pertain primarily to
1061 http://bugs.gentoo.org/show_bug.cgi?id=19695
1062 http://bugs.gentoo.org/show_bug.cgi?id=35736
1063
1064 Specify routes as an array per interface, for example:
1065 routes_eth0=(
1066 "-net 10.1.0.0 netmask 255.255.0.0 gw 10.0.0.5"
1067 "-net 10.2.0.0 netmask 255.255.0.0 gw 10.0.0.6"
1068 "-host 10.3.0.1 dev eth0"
1069 )
1070
1071 You can optionally use the gateway variable or just put the default route
1072 in the routes variable. The following two are REDUNDANT:
1073
1074 routes_eth0=( "default gw 10.0.0.5" )
1075 gateway="eth0/10.0.0.5"
1076
1077 Old configuration variables in /etc/conf.d/net are fully supported and
1078 used transparently if ifconfig_eth0 is missing. In other words, this new
1079 script is fully backward-compatible. However you can get rid of
1080 iface_eth0, alias_eth0, broadcast_eth0 and netmask_eth0 if you want by
1081 using the new syntax:
1082
1083 ifconfig_eth0=(
1084 "10.0.0.6 broadcast 10.0.255.255 netmask 255.255.0.0"
1085 "192.168.1.1 netmask 255.255.255.0"
1086 "123.456.789.1"
1087 )
1088
1089 Full backward compatibility so no danger to screwing up users relying on
1090 existing /etc/conf.d/net setup
1091
1092 NET_DEBUG can be set in the environment for copious debugging output
1093
1094 Deprecate [ ] in favor of [[ ]] which has fewer quoting issues and
1095 better functionality (and is even slightly faster)
1096
1097 Properly localize all variables, including variables returned by
1098 setup_vars
1099
1100 Allow full options for every ifconfig command, both base address and
1101 aliases via ifconfig_eth0, replacing the convoluted and less-functional
1102 iface_eth0, alias_eth0, broadcast_eth0, netmask_eth0
1103
1104 Provide full support for static routes via routes_eth0
1105
1106 Fix potential quoting problems in setup_vars by using better eval syntax
1107 instead of eval echo
1108
1109 Display IP addresses while configuring, both DHCP-retrieved and
1110 statically set addresses
1111
1112 Collapse redundant caching of $? since eend returns $? again
1113
1114 Report when keeping kernel configuration for an interface along with IP
1115 address gleaned
1116
1117 Don't reset the default gateway if it is already set correctly
1118
1119 Don't bind default gateway to particular interface when /sbin/route is
1120 called so that it can survive if there is more than one interface on the
1121 required subnet. (Old behavior can be obtained by setting
1122 routes_eth0="default gw 1.2.3.4 dev eth0" if you really want it)
1123
1124 Don't bomb if default gateway can't be set since that doesn't
1125 necessarily mean that the interface configuration is invalid.
1126 (Old behavior was completely broken, but commented section
1127 demonstrates how to do it right if necessary)
1128
1129 iface_stop no longer relies on configuration in /etc/conf.d/net AT ALL.
1130 This is very good because it means you can put new configuration in
1131 /etc/conf.d/net, then restart the interface and the old configuration will
1132 be properly shut down.
1133
1134 iface_stop reports when it is releasing the DHCP lease
1135
1136* rc-scripts 1.4.3.13p1 (26 Feb 2004)
1137
1138 26 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
1139
1140 Remove /etc/DIR_COLORS, as coreutils provides it now.
1141
1142 Add RC_DEVICE_TARBALL to /etc/conf.d/rc to control use of device tarball.
1143 Also modified /sbin/rc and /etc/init.d/halt.sh for this.
1144
1145 Start udevd if present.
1146
1147 Small fix to sbin/rc-services.sh related to mtime checking and 'net'
1148 virtual service - it had no mtime generated, so check_mtime() failed
1149 for it ...
1150
1151 25 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
1152
1153 Update to enable checking of mtimes on rc-scripts, and auto running
1154 depscan.sh if needed. Also try to run depscan.sh when RC_GOT_DEPTREE_INFO
1155 is not set instead of just erroring.
1156
1157 19 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
1158
1159 Fix irda type-o in /sbin/MAKEDEV, thanks to Tobias Sager <moixa@gmx.ch>.
1160
1161 Fix type-o in /etc/initrc, bug #41666 (Tom Vergote <bugzilla@tomvergote.be>).
4 1162
5 15 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1163 15 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
6 1164
7 Add RC_TTY_NUMBER to /etc/conf.d/rc to configure how many tty devices 1165 Add RC_TTY_NUMBER to /etc/conf.d/rc to configure how many tty devices
8 are used in scripts such as consolefonts, numlock, etc. This should 1166 are used in scripts such as consolefonts, numlock, etc. This should
9 close bug #39863. 1167 close bug #39863.
1168
1169 Fix type-o in /etc/init.d/consolefont, bug #40938, thanks to patch from
1170 Cory Tusar <ctusar@adelphia.net>.
10 1171
11 09 Feb 2004; Martin Schlemmer <azarah@gentoo.org>: 1172 09 Feb 2004; Martin Schlemmer <azarah@gentoo.org>:
12 1173
13 Add SELinux modifications to /sbin/runscript. This allows runscript to 1174 Add SELinux modifications to /sbin/runscript. This allows runscript to
14 make sure it is running in the right domain. Patch done by 1175 make sure it is running in the right domain. Patch done by
1376 2537
1377 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified 2538 Add /opt/bin to $PATH and $ROOTPATH, closing bug #3603. Modified
1378 /etc/env.d/00basic for this. 2539 /etc/env.d/00basic for this.
1379 2540
1380 Add some new daemon stop and pid detection stuff to /sbin/functions.sh. 2541 Add some new daemon stop and pid detection stuff to /sbin/functions.sh.
1381 Nothing official, but I spent enouth time on it not to want to loose it :) 2542 Nothing official, but I spent enough time on it not to want to loose it :)
1382 2543
1383 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs 2544 Fixed a bug in /sbin/functions.sh that caused rc-scripts run as cron jobs
1384 to give output to stderr. This was caused by a call to "stty", which when 2545 to give output to stderr. This was caused by a call to "stty", which when
1385 run without a attatched terminal, have this effect. Basically just pipe 2546 run without a attatched terminal, have this effect. Basically just pipe
1386 stderr to /dev/null. 2547 stderr to /dev/null.
1493 is needed, else /usr/bin/newgrp segfault. 2654 is needed, else /usr/bin/newgrp segfault.
1494 2655
1495 11 Apr 2002; Martin Schlemmer <azarah@gentoo.org>: 2656 11 Apr 2002; Martin Schlemmer <azarah@gentoo.org>:
1496 2657
1497 Update /etc/skel/.bash_profile to make it tcsh compadible. 2658 Update /etc/skel/.bash_profile to make it tcsh compadible.
1498 Thanks to Vin Jrvel for this fix. 2659 Thanks to Väinö Järvelä for this fix.
1499 2660
1500 Update /etc/profile to also set the PS? variables if $SHELL 2661 Update /etc/profile to also set the PS? variables if $SHELL
1501 is set to /bin/sh. This should make prompt colours in 2662 is set to /bin/sh. This should make prompt colours in
1502 bootstrap work again. 2663 bootstrap work again.
1503 2664

Legend:
Removed from v.1.319  
changed lines
  Added in v.1.538

  ViewVC Help
Powered by ViewVC 1.1.20