/[gentoo]/xml/htdocs/doc/en/handbook/hb-install-sparc-medium.xml
Gentoo

Diff of /xml/htdocs/doc/en/handbook/hb-install-sparc-medium.xml

Parent Directory Parent Directory | Revision Log Revision Log | View Patch Patch

Revision 1.34 Revision 1.55
1<?xml version='1.0' encoding='UTF-8'?> 1<?xml version='1.0' encoding='UTF-8'?>
2<!DOCTYPE sections SYSTEM "/dtd/book.dtd"> 2<!DOCTYPE sections SYSTEM "/dtd/book.dtd">
3 3
4<!-- The content of this document is licensed under the CC-BY-SA license --> 4<!-- The content of this document is licensed under the CC-BY-SA license -->
5<!-- See http://creativecommons.org/licenses/by-sa/1.0 --> 5<!-- See http://creativecommons.org/licenses/by-sa/2.5 -->
6 6
7<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-sparc-medium.xml,v 1.34 2005/09/05 15:22:02 neysx Exp $ --> 7<!-- $Header: /var/cvsroot/gentoo/xml/htdocs/doc/en/handbook/hb-install-sparc-medium.xml,v 1.55 2012/11/12 21:04:16 swift Exp $ -->
8 8
9<sections> 9<sections>
10 10
11<version>2.4</version> 11<version>15</version>
12<date>2005-09-05</date> 12<date>2012-11-12</date>
13 13
14<section> 14<section>
15<title>Hardware Requirements</title> 15<title>Hardware Requirements</title>
16<subsection> 16<subsection>
17<title>Introduction</title> 17<title>Introduction</title>
30 30
31<table> 31<table>
32<tr> 32<tr>
33 <th>Sparc System</th> 33 <th>Sparc System</th>
34 <ti> 34 <ti>
35 Please check the <uri 35 Please check the <uri link="/proj/en/base/sparc/sunhw.xml">Gentoo
36 Linux/SPARC64 Compatibility list</uri> or the <uri
36 link="http://www.ultralinux.org/faq.html#s_2">UltraLinux FAQ</uri> 37 link="http://www.ultralinux.org/faq.html#s_2">UltraLinux FAQ</uri>
37 </ti> 38 </ti>
38</tr> 39</tr>
39<tr> 40<tr>
40 <th>CPU</th> 41 <th>CPU</th>
41 <ti> 42 <ti>
42 We currently only support sparc64 CPUs 43 We currently only support SPARC64 CPUs
43 </ti> 44 </ti>
44</tr> 45</tr>
45<tr> 46<tr>
46 <th>Memory</th> 47 <th>Memory</th>
47 <ti>64 MB</ti> 48 <ti>64 MB</ti>
57</table> 58</table>
58 59
59</body> 60</body>
60</subsection> 61</subsection>
61</section> 62</section>
62<!-- Copy/Paste from hb-install-x86-medium.xml --> 63
63<!-- Warning: The part originally contains "x86" -->
64<!-- START --> 64<!-- START -->
65<section>
66<title>The Gentoo Installation Approaches</title>
67<subsection>
68<title>Introduction</title>
69<body>
70
71<p>
72Gentoo Linux can be installed using one of three <e>stage</e> tarball files.
73A stage file is a tarball (compressed archive) that contains a minimal
74environment.
75</p>
76
77<ul>
78 <li>
79 A stage1 file contains nothing more than a compiler, Portage (Gentoo's
80 software management system) and a couple of packages on which the compiler
81 or Portage depends.
82 </li>
83 <li>
84 A stage2 file contains a so-called bootstrapped system, a minimal
85 environment from which one can start building all other necessary
86 applications that make a Gentoo environment complete.
87 </li>
88 <li>
89 A stage3 file contains a prebuilt minimal system which is almost fully
90 deployable. It only lacks a few applications where you, the Gentoo user,
91 needs to choose which one you want to install.
92 </li>
93</ul>
94
95<p>
96To help you decide what stage file you want to use, we have written down the
97major advantages and disadvantages of each stage file.
98</p>
99
100</body>
101</subsection>
102<subsection>
103<title>A Stage1 Approach</title>
104<body>
105
106<p>
107A <e>stage1</e> is used when you want to bootstrap and build the entire system
108from scratch.
109</p>
110
111<p>
112Starting from a stage1 allows you to have total control over the
113optimization settings and optional build-time functionality that is
114initially enabled on your system. This makes <e>stage1</e> installs good for
115power users who know what they are doing. It is also a great
116installation method for those who would like to know more about the
117inner workings of Gentoo Linux.
118</p>
119
120<table>
121<tr>
122 <th>Stage1</th>
123 <th>Pros and Cons</th>
124</tr>
125<tr>
126 <th>+</th>
127 <ti>
128 Allows you to have total control over the optimization settings and optional
129 build-time functionality that is initially enabled on your system
130 </ti>
131</tr>
132<tr>
133 <th>+</th>
134 <ti>Suitable for powerusers that know what they are doing</ti>
135</tr>
136<tr>
137 <th>+</th>
138 <ti>Allows you to learn more about the inner workings of Gentoo</ti>
139</tr>
140<tr>
141 <th>-</th>
142 <ti>Takes a long time to finish the installation</ti>
143</tr>
144<tr>
145 <th>-</th>
146 <ti>
147 If you don't intend to tweak the settings, it is a waste of time
148 </ti>
149</tr>
150<tr>
151 <th>-</th>
152 <ti>
153 Requires a working Internet connection during the installation
154 </ti>
155</tr>
156</table>
157
158</body>
159</subsection>
160<subsection>
161<title>A Stage2 Approach</title>
162<body>
163
164<p>
165A <e>stage2</e> is used for building the entire system from a bootstrapped
166"semi-compiled" state.
167</p>
168
169<p>
170Stage2 installs allow you to skip the bootstrap process; doing this
171is fine if you are happy with the optimization settings that we chose
172for your particular stage2 tarball.
173</p>
174
175<table>
176<tr>
177 <th>Stage2</th>
178 <th>Pros and Cons</th>
179</tr>
180<tr>
181 <th>+</th>
182 <ti>You don't need to bootstrap</ti>
183</tr>
184<tr>
185 <th>+</th>
186 <ti>Faster than starting with stage1</ti>
187</tr>
188<tr>
189 <th>+</th>
190 <ti>You can still tweak your settings</ti>
191</tr>
192<tr>
193 <th>-</th>
194 <ti>You cannot tweak as much as with a stage1</ti>
195</tr>
196<tr>
197 <th>-</th>
198 <ti>It's still not the fastest way to install Gentoo</ti>
199</tr>
200<tr>
201 <th>-</th>
202 <ti>You have to accept the optimizations we chose for the bootstrap</ti>
203</tr>
204<tr>
205 <th>-</th>
206 <ti>
207 Requires a working Internet connection during the installation
208 </ti>
209</tr>
210</table>
211
212</body>
213</subsection>
214<subsection>
215<title>A Stage3 Approach</title>
216<body>
217
218<p>
219A <e>stage3</e> installation contains a basic Gentoo Linux system that has been
220built for you. You will only need to build a few packages of which we can't
221decide for you which one to choose.
222</p>
223
224<p>
225Choosing to go with a stage3 allows for the fastest install of Gentoo
226Linux, but also means that your base system will have the optimization
227settings that we chose for you (which to be honest, are good settings
228and were carefully chosen to enhance performance while maintaining
229stability). Stage3 is also required if you want to install Gentoo using
230prebuilt packages or without a network connection.
231</p>
232
233<table>
234<tr>
235 <th>Stage3</th>
236 <th>Pros and Cons</th>
237</tr>
238<tr>
239 <th>+</th>
240 <ti>Fastest way to get a Gentoo base system</ti>
241</tr>
242<tr>
243 <th>-</th>
244 <ti>You cannot tweak the base system - it's built already</ti>
245</tr>
246</table>
247
248<p>
249You might be interested to know that, if you decide to use different
250optimization settings after having installed Gentoo, you will be able to
251recompile your entire system with the new optimization settings.
252</p>
253
254</body>
255</subsection>
256</section>
257<section> 65<section>
258<title>The Gentoo Installation CDs</title> 66<title>The Gentoo Installation CDs</title>
259<subsection> 67<subsection>
260<title>Introduction</title> 68<title>Introduction</title>
261<body> 69<body>
267are loaded. They are maintained by Gentoo developers. 75are loaded. They are maintained by Gentoo developers.
268</p> 76</p>
269 77
270<p> 78<p>
271All Installation CDs allow you to boot, set up networking, initialize your 79All Installation CDs allow you to boot, set up networking, initialize your
272partitions and start installing Gentoo from the Internet. We currently provide 80partitions and start installing Gentoo from the Internet.
273two Installation CDs which are equaly suitable to install Gentoo from, as long
274as you're planning on performing an Internet-based installation using the latest
275version of the available packages.
276</p>
277
278<p> 81</p>
82<!--
83<impo>
279If you wish to install Gentoo without a working Internet connection, please use 84If you wish to install Gentoo without a working Internet connection, please use
280the installation instructions described in the <uri 85the installation instructions described in the <uri
281link="2005.1/index.xml">Gentoo 2005.1 Handbooks</uri>. 86link="2008.0/index.xml">Gentoo 2008.0 Handbooks</uri>.
282</p> 87</impo>
283 88-->
89<!--
284<p> 90<p>
285The two Installation CDs that we currently provide are: 91The two Installation CDs that we currently provide are:
286</p> 92</p>
287 93
288<ul> 94<ul>
291 which sole purpose is to boot the system, prepare the networking and 97 which sole purpose is to boot the system, prepare the networking and
292 continue with the Gentoo installation. 98 continue with the Gentoo installation.
293 </li> 99 </li>
294 <li> 100 <li>
295 The Gentoo <e>Universal</e> Installation CD, a bootable CD with the same 101 The Gentoo <e>Universal</e> Installation CD, a bootable CD with the same
296 abilities as the Minimal Installation CD. Additionally, it contains a 102 abilities as the Minimal Installation CD. Additionally, it contains
297 stage1 and several stage3 tarballs (optimized for the individual 103 several stage3 tarballs (optimized for the individual subarchitectures).
298 subarchitectures).
299 </li> 104 </li>
300</ul> 105</ul>
301 106
302<p> 107<p>
303We currently only provide Installation CDs for the sparc64 architecture. Users
304of sparc32 can use the experimental netboot images to install Gentoo from.
305More information about netbooting can be found in our <uri
306link="/doc/en/gentoo-sparc-netboot-howto.xml">Gentoo/SPARC Netboot
307HOWTO</uri>.
308</p>
309
310<p>
311To help you decide which Installation CD you need, we have written down the 108To help you decide which Installation CD you need, we have written down the
312major advantages and disadvantages of each Installation CD. 109major advantages and disadvantages of each Installation CD.
313</p> 110</p>
314 111-->
315</body> 112</body>
316</subsection>
317<subsection> 113</subsection>
114<subsection>
318<title>Gentoo's Minimal Installation CD</title> 115<title>Gentoo Minimal Installation CD</title>
319<body> 116<body>
320 117
321<p>
322The Minimal Installation CD is called <c>install-sparc64-minimal-2005.1.iso</c>
323and takes up only 130 MB of diskspace. You can use this Installation CD to
324install Gentoo, but always with a working Internet connection only.
325</p> 118<p>
326 119The Minimal Installation CD is called <c><keyval id="min-cd-name"/></c> and
120takes up around <keyval id="min-cd-size"/> MB of diskspace. You can use this
121Installation CD to install Gentoo, but <e>only</e> with a working Internet
122connection.
123</p>
124<!--
327<table> 125<table>
328<tr> 126<tr>
329 <th>Minimal Installation CD</th> 127 <th>Minimal Installation CD</th>
330 <th>Pros and Cons</th> 128 <th>Pros and Cons</th>
331</tr> 129</tr>
332<tr> 130<tr>
333 <th>+</th> 131 <th>+</th>
334 <ti>Smallest download</ti> 132 <ti>Smallest download</ti>
335</tr> 133</tr>
336<tr> 134<tr>
337 <th>+</th>
338 <ti>
339 You can do a stage1, stage2 or stage3 by getting the stage tarball off the
340 net
341 </ti>
342</tr>
343<tr>
344 <th>-</th> 135 <th>-</th>
345 <ti> 136 <ti>
346 Contains no stages, no Portage snapshot, no prebuilt packages and is 137 Contains no stage3 tarball, no Portage snapshot, no prebuilt packages and is
347 therefore not suitable for networkless installation 138 therefore not suitable for networkless installation
348 </ti> 139 </ti>
349</tr> 140</tr>
350</table> 141</table>
351 142
354<subsection> 145<subsection>
355<title>Gentoo's Universal Installation CD</title> 146<title>Gentoo's Universal Installation CD</title>
356<body> 147<body>
357 148
358<p> 149<p>
359The Universal Installation CD is called 150The Universal Installation CD is called
360<c>install-sparc-universal-2005.1.iso</c> and consumes the entire surface of a 151<c>install-sparc64-universal-2008.0.iso</c> and uses 295 MB. You can use this
361650 MB CD. You can use this Installation CD to install 152Installation CD to install Gentoo, and you can even use it to install Gentoo
362Gentoo, and you can even use it to install Gentoo without a working internet 153without a working internet connection.
363connection, just in case you want to bring Gentoo to another PC than the one you
364are currently installing Gentoo on :)
365</p> 154</p>
366 155
367<table> 156<table>
368<tr> 157<tr>
369 <th>Universal Installation CD</th> 158 <th>Universal Installation CD</th>
379<tr> 168<tr>
380 <th>-</th> 169 <th>-</th>
381 <ti>Huge download</ti> 170 <ti>Huge download</ti>
382</tr> 171</tr>
383</table> 172</table>
384 173-->
174<!--
385</body> 175</body>
386</subsection> 176</subsection>
387<subsection> 177<subsection>
388<title>Other CDs</title> 178<title>Other CDs</title>
389<body> 179<body>
390 180
391<p> 181<p>
392You might find a so-called <e>Package CD</e> on one of our mirrors. This CD is 182You might find a <e>Package CD</e> on one of our mirrors. This CD is not an
393no Installation CD but an additional resource that can be exploited during a 183Installation CD but an additional resource that can be exploited during a
394networkless installation. It contains prebuilt packages (the so-called GRP set) 184networkless installation. It contains prebuilt packages (also known as the GRP
395that allows you to easily and quickly install additional applications (such as 185set) that allow you to easily and quickly install additional applications
396OpenOffice.org, KDE, GNOME, ...) immediately after the networkless Gentoo 186(such as OpenOffice.org, KDE, GNOME, ...) immediately after the networkless
397installation. 187Gentoo installation.
188</p>
189
190<p>
191If you intend to use the Packages CD to quickly install additional software,
192make sure that you use the same subarchitecture as the stage3 tarball you use.
193</p>
194-->
195</body>
196</subsection>
197<subsection>
198<title>The Stage3 Tarball</title>
199<body>
200
201<p>
202A stage3 tarball is an archive containing a minimal Gentoo environment, suitable
203to continue the Gentoo installation using the instructions in this manual.
204Previously, the Gentoo Handbook described the installation using one of three
205stage tarballs. While Gentoo still offers stage1 and stage2 tarballs, the
206official installation method uses the stage3 tarball. If you are interested in
207performing a Gentoo installation using a stage1 or stage2 tarball, please read
208the Gentoo FAQ on <uri link="/doc/en/faq.xml#stage12">How do I Install Gentoo
209Using a Stage1 or Stage2 Tarball?</uri>
210</p>
211
212<p>
213Stage3 tarballs can be downloaded from <path><keyval
214id="release-dir"/>current-stage3/</path> on any of the <uri
215link="/main/en/mirrors.xml">Official Gentoo Mirrors</uri> and are not provided
216on the LiveCD.
217</p>
218
219</body>
220</subsection>
221<subsection>
222<title>TFTPBoot image</title>
223<body>
224
225<p>
226If you can't use a CD, or prefer booting over an IP network, there're also
227TFTPBoot images available on our <uri link="/main/en/mirrors.xml">mirrors</uri>
228under <path>experimental/sparc/tftpboot/sparc64/</path>.
229</p>
230
231<p>
232For setting up a netboot server, please read the <uri
233link="/doc/en/gentoo-sparc-netboot-howto.xml">Gentoo/SPARC Netboot
234HOWTO</uri>.
398</p> 235</p>
399 236
400</body> 237</body>
401</subsection> 238</subsection>
402</section> 239</section>
412downloading and burning the chosen Installation CD. We previously discussed 249downloading and burning the chosen Installation CD. We previously discussed
413the several available Installation CDs, but where can you find them? 250the several available Installation CDs, but where can you find them?
414</p> 251</p>
415 252
416<p> 253<p>
417You can download any of the Installation CDs (and, if you want to, a Packages 254You can download any of the Installation CDs from one of our <uri
418CD as well) from one of our <uri link="/main/en/mirrors.xml">mirrors</uri>. The 255link="/main/en/mirrors.xml">mirrors</uri>. The Installation CDs are located in
419Installation CDs are located in the 256the <path><keyval id="release-dir"/>current-iso/</path> directory.
420<path>releases/sparc/2005.1/sparc64/installcd</path> directory.
421</p>
422
423<p> 257</p>
258
259<p>
424Inside that directory you'll find so-called ISO-files. Those are full CD images 260Inside that directory you'll find ISO files. Those are full CD images which you
425which you can write on a CD-R. 261can write on a CD-R.
426</p>
427
428<p> 262</p>
263
264<p>
429In case you wonder if your downloaded file is corrupted or not, you can check its 265In case you wonder if your downloaded file is corrupted or not, you can check
430MD5 checksum and compare it with the MD5 checksum we provide (such as 266its SHA-2 checksum and compare it with the SHA-2 checksum we provide (such as
431<path>install-sparc64-minimal-2005.1.iso.md5</path>). You can check the MD5 267<path><keyval id="min-cd-name"/>.DIGESTS</path>). You can check the SHA-2
432checksum with the <c>md5sum</c> tool under Linux/Unix or <uri 268checksum with the <c>sha512sum</c> tool under Linux/Unix or <uri
433link="http://www.etree.org/md5com.html">md5sum</uri> for Windows. 269link="http://www.krylack.com/file-checksum-tool/">File Checksum Tool</uri> for Windows.
434</p> 270</p>
435 271
436<p> 272<p>
437Another way to check the validity of the downloaded file is to use GnuPG to 273Another way to check the validity of the downloaded file is to use GnuPG to
438verify the cryptographic signature that we provide (the file ending with 274verify the cryptographic signature that we provide (the file ending with
439<path>.asc</path>). Download the signature file and obtain the public key: 275<path>.asc</path>). Download the signature file and obtain the public keys whose
276key ids can be found on the <uri link="/proj/en/releng/index.xml">release
277engineering project site</uri>.
440</p> 278</p>
441 279
442<pre caption="Obtaining the public key"> 280<pre caption="Obtaining the public key">
281<comment>(... Substitute the key ids with those mentioned on the release engineering site ...)</comment>
443$ <i>gpg --keyserver pgp.mit.edu --recv-keys 17072058</i> 282$ <i>gpg --keyserver subkeys.pgp.net --recv-keys 96D8BF6D 2D182910 17072058</i>
444</pre> 283</pre>
445 284
446<p> 285<p>
447Now verify the signature: 286Now verify the signature:
448</p> 287</p>
449 288
450<pre caption="Verify the cryptographic signature"> 289<pre caption="Verify the files">
451$ <i>gpg --verify &lt;signature file&gt; &lt;downloaded iso&gt;</i> 290<comment>(Verify the cryptographic signature)</comment>
291$ <i>gpg --verify &lt;downloaded iso.DIGESTS.asc&gt;</i>
292<comment>(Verify the checksum)</comment>
293$ <i>sha1sum -c &lt;downloaded iso.DIGESTS.asc&gt;</i>
452</pre> 294</pre>
453 295
454<p> 296<p>
455To burn the downloaded ISO(s), you have to select raw-burning. How you 297To burn the downloaded ISO(s), you have to select raw-burning. How you
456do this is highly program-dependent. We will discuss <c>cdrecord</c> and 298do this is highly program-dependent. We will discuss <c>cdrecord</c> and
463 With cdrecord, you simply type <c>cdrecord dev=/dev/hdc &lt;downloaded iso 305 With cdrecord, you simply type <c>cdrecord dev=/dev/hdc &lt;downloaded iso
464 file&gt;</c> (replace <path>/dev/hdc</path> with your CD-RW drive's device 306 file&gt;</c> (replace <path>/dev/hdc</path> with your CD-RW drive's device
465 path). 307 path).
466 </li> 308 </li>
467 <li> 309 <li>
468 With K3B, select <c>Tools</c> &gt; <c>CD</c> &gt; <c>Burn Image</c>. Then 310 With K3B, select <c>Tools</c> &gt; <c>Burn CD Image</c>. Then you can locate
469 you can locate your ISO file within the 'Image to Burn' area. Finally click 311 your ISO file within the 'Image to Burn' area. Finally click <c>Start</c>.
470 <c>Start</c>.
471 </li> 312 </li>
472</ul> 313</ul>
473 314
474</body> 315</body>
475</subsection> 316</subsection>
486<pre caption="Booting the Installation CD"> 327<pre caption="Booting the Installation CD">
487ok <i>boot cdrom</i> 328ok <i>boot cdrom</i>
488</pre> 329</pre>
489 330
490<p> 331<p>
491You will be greeted by the SILO boot manager (on the Installation CD). Type in 332You will be greeted by the SILO boot manager (on the Installation CD). You can
492<c>gentoo-2.4</c> and press enter to continue booting the 333hit Enter for more help if you want. Type in <c>gentoo</c> and press enter to
493system: 334continue booting the system:
494</p> 335</p>
495 336
496<pre caption="Continue booting from the Installation CD"> 337<pre caption="Continue booting from the Installation CD">
497boot: <i>gentoo-2.4</i> 338boot: <i>gentoo</i>
498</pre> 339</pre>
499 340
500<p> 341<p>
501Once the Installation CD is booted, you will be automatically logged on to the 342Once the Installation CD is booted, you will be automatically logged on to the
502system. 343system.
503</p> 344</p>
504 345
505<p> 346<p>
506You should have a root ("#") prompt on the current console and can also switch 347You should have a root ("#") prompt on the current console. You will also find a
507to other consoles by pressing Alt-F2, Alt-F3 and Alt-F4. Get back to the one you 348root prompt on the serial console (<path>ttyS0</path>).
508started on by pressing Alt-F1. You will also find a root prompt on the serial
509console (<path>ttyS0</path>).
510</p> 349</p>
511 350
512<p> 351<p>
513Continue with <uri link="#hardware">Extra Hardware Configuration</uri>. 352Continue with <uri link="#hardware">Extra Hardware Configuration</uri>.
514</p> 353</p>
515 354
516</body> 355</body>
517</subsection> 356</subsection>
518<subsection id="hardware">
519<title>Extra Hardware Configuration</title>
520<body>
521 357
522<p>
523If not all hardware is supported out-of-the-box, you will need to load the
524appropriate kernel modules.
525</p>
526
527<p>
528In the next example we try to load the <c>8139too</c> module (support for
529certain kinds of network interfaces):
530</p>
531
532<pre caption="Loading kernel modules">
533# <i>modprobe 8139too</i>
534</pre>
535
536</body>
537</subsection> 358<subsection>
538<subsection id="useraccounts"> 359<include href="hb-install-bootconfig.xml"/>
539<title>Optional: User Accounts</title>
540<body>
541
542<p>
543If you plan on giving other people access to your installation
544environment or you want to chat using <c>irssi</c> without root privileges (for
545security reasons), you need to create the necessary user accounts and change
546the root password.
547</p>
548
549<p>
550To change the root password, use the <c>passwd</c> utility:
551</p>
552
553<pre caption="Changing the root password">
554# <i>passwd</i>
555New password: <comment>(Enter your new password)</comment>
556Re-enter password: <comment>(Re-enter your password)</comment>
557</pre>
558
559<p>
560To create a user account, we first enter their credentials, followed by
561its password. We use <c>useradd</c> and <c>passwd</c> for these tasks.
562In the next example, we create a user called &quot;john&quot;.
563</p>
564
565<pre caption="Creating a user account">
566# <i>useradd -m -G users john</i>
567# <i>passwd john</i>
568New password: <comment>(Enter john's password)</comment>
569Re-enter password: <comment>(Re-enter john's password)</comment>
570</pre>
571
572<p>
573You can change your user id from root to the newly created user by using
574<c>su</c>:
575</p>
576
577<pre caption="Changing user id">
578# <i>su - john</i>
579</pre>
580
581</body>
582</subsection>
583<subsection> 360</subsection>
584<title>Optional: Viewing Documentation while Installing</title>
585<body>
586 361
587<p>
588If you want to view the Gentoo Handbook (either from-CD or online) during the
589installation, make sure you have created a user account (see <uri
590link="#useraccounts">Optional: User Accounts</uri>). Then press <c>Alt-F2</c> to
591go to a new terminal and log in.
592</p>
593
594<p>
595If you want to view the documentation on the CD you can immediately run
596<c>links2</c> to read it:
597</p>
598
599<pre caption="Viewing the on-CD documentation">
600# <i>links2 /mnt/cdrom/docs/handbook/html/index.html</i>
601</pre>
602
603<p>
604However, it is preferred that you use the online Gentoo Handbook as it will be
605more recent than the one provided on the CD. You can view it using <c>links2</c>
606as well, but only after having completed the <e>Configuring your Network</e>
607chapter (otherwise you won't be able to go on the Internet to view the
608document):
609</p>
610
611<pre caption="Viewing the Online Documentation">
612# <i>links2 http://www.gentoo.org/doc/en/handbook/handbook-sparc.xml</i>
613</pre>
614
615<p>
616You can go back to your original terminal by pressing <c>Alt-F1</c>.
617</p>
618
619</body>
620</subsection>
621<subsection>
622<title>Optional: Starting the SSH Daemon</title>
623<body>
624
625<p>
626If you want to allow other users to access your computer during the
627Gentoo installation (perhaps because those users are going to help you
628install Gentoo, or even do it for you), you need to create a user
629account for them and perhaps even provide them with your root password
630(<e>only</e> do that <e>if</e> you <b>fully trust</b> that user).
631</p>
632
633<p>
634To fire up the SSH daemon, execute the following command:
635</p>
636
637<pre caption="Starting the SSH daemon">
638# <i>/etc/init.d/sshd start</i>
639</pre>
640
641<p>
642To be able to use sshd, you first need to set up your networking. Continue with
643the chapter on <uri link="?part=1&amp;chap=3">Configuring your Network</uri>.
644</p>
645
646</body>
647</subsection>
648</section> 362</section>
649</sections> 363</sections>

Legend:
Removed from v.1.34  
changed lines
  Added in v.1.55

  ViewVC Help
Powered by ViewVC 1.1.20